Glass-Filled Nylon and Metal Breathers IP65 Rated, Metal, Screw-on and Lockables Reservoir Equipment

Size: px

Start display at page:

Download "Glass-Filled Nylon and Metal Breathers IP65 Rated, Metal, Screw-on and Lockables Reservoir Equipment"

Regina Molly McKenzie
5 years ago
Views:

Glass-Filled Nylon and Metal Breathers IP65 Rated, Metal, Screw-on and Lockables Compact and lightweight reservoir solutions IP65 Co-polymer breathers and metal breathers The IP65 rated range of

Single hole, 6-hole, 3-hole and screw-on options are available; plus metal air breather, filler breather and lockable options are a proven range of quality reservoir solutions.

1 Glass-Filled Nylon and Metal Breathers IP65 Rated, Metal, Screw-on and Lockables Compact and lightweight reservoir solutions IP65 Co-polymer breathers and metal breathers The IP65 rated range of moulded, non-corrodible, glass-filled nylon air breathers combine strength with a lightweight design. Single hole, 6-hole, 3-hole and screw-on options are available; plus metal air breather, filler breather and lockable options are a proven range of quality reservoir solutions. Contact Information: European Product Information Centre Freephone: (from T, BE, CH, CZ, DE, EE, ES, FI, FR, IE, IT, PT, SE, SK, UK) filtrationinfo@parker.com Product Features: Moulded in non-corrodible, glass-filled nylon strong and light. Single hole, 6 hole and 3 hole installation. Screw-on breather range G½ and G¾ options. Compact range G¼, G 3 /8, R½ and R¾ options. Metal filler breathers pressurized threaded type. Metal filler breathers unpressurized threaded type. Filter flange type. Lockable range for reservoir security and oil protection. 33 FDHB5UK.

IP65 Rated Filler Breathers Specification for Single and 6 Hole Installation Option 1 Construction: Moulded in non-corrodible glass-filled nylon combining strength with a lightweight design.

(2) 6 hole Filler Breather Installation that uses 6xNo1thread forming screws. (3) 3 hole filler breather utilises 3 x zinc and clear chromate plated steel screws.

(1) Single length in polypropylene (95mm length) (2) 2-piece telescopic in polypropylene (195mm length max.) Filtration element: Expanded polyurethane foam, 1 micron nominal. Seals: Nitrile.

2 IP65 Rated Filler Breathers Specification for Single and 6 Hole Installation Option 1 Construction: Moulded in non-corrodible glass-filled nylon combining strength with a lightweight design. Options: (1) single (63mm dia) hole Filler breather installation that eliminates drilled and tapped holes using self-locking clamps. (2) 6 hole Filler Breather Installation that uses 6xNo1thread forming screws. (3) 3 hole filler breather utilises 3 x zinc and clear chromate plated steel screws. Option 1 Filler Breathers (Single Hole Installation) Strainers: Unique design diffuses oil flow into the reservoir. (1) Single length in polypropylene (95mm length) (2) 2-piece telescopic in polypropylene (195mm length max.) Filtration element: Expanded polyurethane foam, 1 micron nominal. Seals: Nitrile. Working temperature: -3 C to +9 C. Pressurised filler breathers: vailable in 3 pressure options to maintain a positive pressure in a reservoir. Pressurisation options:.2,.35 and.7 bar crack pressure. Pressurisation valve: Nylon/Nitrile. Dipstick: vailable for use with options 1 and 2. Dipsticks are available in 2 lengths and in packs of 1. Dipstick material: BS. Hi/Lo indicators: cetal. djustable Red/Green level indicators. Dipstick lengths: 2mm and 4mm. Breather weight:.2kg. nti-splash feature: The unique design antisplash feature is standard on all options 1 and 2 and allows for a dipstick to be fitted if required. Ø11 B98XXX Pressurised Pressure Drop Curves Valve max Ø42 Ø7. bar bar Valve.35 Valve Flow I/sec (ir) B98XXX Non-Pressurised Pressure Drop Curves With nti-splash Δp (PSID) Δp (PSID) Option 1. Single Hole Filler Breathers Pressurised B B B B B B B B B B UC B UC B UC B UC B UC B UC B UC B UC B UC Note 1: s featured with bold highlighted codes will Description. Pressurised.2bar with 95mm strainer Pressurised.35bar with 95mm strainer Pressurised.2bar without strainer Pressurised.2bar with telescopic strainer Pressurised.35bar without strainer Pressurised.35bar with telescopic strainer Pressurised.7bar without strainer Pressurised.7bar with 95mm strainer Pressurised.7bar with telescopic strainer.5 Without nti-splash Flow I/sec (ir) Option 1. Single Hole Filler Breathers Non-Pressurised B B B98211 B UC B UC B UC Note 1: s featured with bold highlighted codes will Description. Filler breather with 95mm strainer Filler breather with telescopic strainer Filler breather without strainer 34 FDHB5UK.

Pressurised 6-hole fixing: Form 6 off tank mounting holes between Ø4. and Ø4.4mm (dependent on the material and thickness see guide below) equispaced on 73mm P.C.D. to suit supplied No.

3 Filler Breathers (6 Hole Installation) Option 2 Note 1. Un-pressurised 6 hole fixing: Form 6 off tank mounting holes between Ø4. and 4.4mm (dependent on the material and thickness see guide below) equispaced on 7-73mm P.C.D. to suit supplied No.1 thread forming screws. Note 2. Pressurised 6-hole fixing: Form 6 off tank mounting holes between Ø4. and Ø4.4mm (dependent on the material and thickness see guide below) equispaced on 73mm P.C.D. to suit supplied No.1 thread forming screws. 72 Ø11 Note 3. Reservoir mounting guide Sheet thickness mm Hole size mm Telescopic Strainer The telescopic strainer design is ideal, where reservoir depth allows, to increase the surface area of the strainer, improving still further its straining ability, oil flow-through and allowing for longer dipstick lengths. Option 2. 6 Hole Filler Breathers Pressurised B B B B B B B B B Ø31 Ø42 B UC B UC B UC B UC B UC B UC B UC B UC B UC Note 1: s featured with bold highlighted codes will Description Pressurised.7bar with 95mm strainer Pressurised.2bar without strainer Pressurised.2bar with 95mm strainer Pressurised.2bar with telescopic strainer Pressurised.35bar without strainer Pressurised.35bar with 95mm strainer Pressurised.35bar with telescopic strainer Pressurised.7bar without strainer Pressurised.7bar with telescopic strainer 72 Ø11 Ø42 Ø Option 2. 6 Hole Filler Breathers Non-Pressurised B98811 B B B UC B UC B UC Note 1: s featured with bold highlighted codes will Description Filler breather without strainer Filler breather with 95mm strainer Filler breather with telescopic strainer x Ø FDHB5UK.

Filler Breathers Option 3 Filler Breathers (3 Hole Installation) 63.5 46 Ø5.

Not suitable for use with B.6826/27 Note 4: 6-hole B.6891/B.68918 option available. Note: Form 3 off tank mounting holes between Ø4. and Ø4.

4 Filler Breathers Option 3 Filler Breathers (3 Hole Installation) Ø5.5 Ø53 New Options Fully Tested s part of the design development programme for the new IP65 Filler Breathers, extensive performance and endurance testing was carried out to ensure durability and efficiency. Ø24 3x Ø hole Filler Breathers (6-hole available) B6811 B68118 Description Filler breather without strainer Filler breather with 95mm strainer Note 1: s featured with bold highlighted codes will Note 3: Not suitable for use with B.6826/27 Note 4: 6-hole B.6891/B option available. Note: Form 3 off tank mounting holes between Ø4. and Ø4.4mm (dependent on the material and thickness see chart for guide) equispaced on 41.3 P.C.D. to suit No. 1 thread forming screws supplied. Dipstick Options Dipstick Ordering B6826 B6827 DIP.26 DIP.27 Description 1 x 2mm Dipsticks 1 x 4mm Dipsticks Note 1: s featured with bold highlighted codes will Dipsticks The dipstick, available in 2 lengths 2mm and 4mm, can be cut to the required length or left as it is and the Hi/ Lo indicators moved and positioned on the dipstick itself by squeezing the sides of the indicator and repositioning along the dipstick. 36 FDHB5UK.

Screw-On Type ir Breathers Standard Screw-On Breathers - Specification Option 1 G 1 /2 and (Ø11) Pressure Drop Flow Curve Construction: Moulded in non-corrodible glass-filled nylon combining strength

Working temperature: -3 C to +9 C. Pressurised air breathers: vailable in 3 pressure options to maintain a positive pressure in a reservoir. Pressurisation options:.2,.35 and.7 bar crack pressure.

djustable red/green level indicators. Dipstick lengths: 2mm and 4mm. Breather weight:.2kg.

4.25 G 1 /2 Ø11 Δp (bar).2.15.1 With nti-splash 2.9 1.5 Δp (PSID) 93.5 Without nti-splash 5 1 15 Flow I/sec (ir) 13 1 G 1 /2 3 /F HEX Note: For pressure drop information on the Option 1.

5 Screw-On Type ir Breathers Standard Screw-On Breathers - Specification Option 1 G 1 /2 and (Ø11) Pressure Drop Flow Curve Construction: Moulded in non-corrodible glass-filled nylon combining strength with a lightweight design. Option 1: 2 screw on type air breathers are available G 1 /2 or threaded base models. Filtration element: Expanded polyurethane foam, 1 micron absolute. Seals: Nitrile. Working temperature: -3 C to +9 C. Pressurised air breathers: vailable in 3 pressure options to maintain a positive pressure in a reservoir. Pressurisation options:.2,.35 and.7 bar crack pressure. Pressurisation valve: Nylon/Nitrile. Dipstick: vailable for use with all options. Dipsticks are available in 2 lengths and in packs of 1. Dipstick material: BS. Hi/Lo indicators: cetal. djustable red/green level indicators. Dipstick lengths: 2mm and 4mm. Breather weight:.2kg. nti-splash feature: The unique design anti-splash feature is standard on option 1 and allows for a dipstick to be fitted if required. B98XXX Screw-on Non-Pressurised Pressure Drop Curves G 1 /2 Ø11 Δp (bar) With nti-splash Δp (PSID) 93.5 Without nti-splash Flow I/sec (ir) 13 1 G 1 /2 3 /F HEX Note: For pressure drop information on the Option 1. Pressurised consult Parker Filtration. Option 1 G 1 /2 or B B B B B B B B B UC B UC B UC B UC B UC B UC B UC B UC Description 1μ nom G 1 /2 Un-pressurised G 1 /2 pressurised.2 bar G 1 /2 pressurised.35 bar G 1 /2 pressurised.7 bar Un-pressurised pressurised.2 bar pressurised.35 bar pressurised.7 bar Note 1: s featured with bold highlighted codes will Ø /F HEX 37 FDHB5UK.

Screw-On Type ir Breathers Compact Screw-On Breathers - Specification Option 2 G 1 /4, G 3 /8, R 1 /2 and R 3 /4 (Ø4) Construction: G 1 /4, G 3 /8, R 1 /2 and R 3 /4 cap and base plate mouldings in

6 Screw-On Type ir Breathers Compact Screw-On Breathers - Specification Option 2 G 1 /4, G 3 /8, R 1 /2 and R 3 /4 (Ø4) Construction: G 1 /4, G 3 /8, R 1 /2 and R 3 /4 cap and base plate mouldings in nylon 66. Element: Expanded Polyurethane foam, 1 micron absolute. Dipstick: vailable for use with R 1 /2 and R 3 /4. Dipstick material: BS. Hi/Lo indicators: cetal adjustable red/green level indicators. Dipstick lengths: 2mm and 4mm (packs of 1). Breather weights:.28kg Pressure Drop Flow Curve Ordering Information Δp (bar) G1/ Flow I/sec (ir) Δp (PSID) Option 2 G 1 /4, G 3 /8, R 1 /2 and R 3 /4 (Packs of 1 only) B68311 B68X11 B68Y11 B68Z11 B UC B.68X11.UC B.68Y11.UC B.68Z11.UC Description G 1 /4 Un-pressurised G 3 /8 Un-pressurised R 1 /2 Un-pressurised R 3 /4 Un-pressurised Note 1: s featured with bold highlighted codes will Note: For pressure drop information on G 3 /8, R 1 /2 and R 3 /4, consult Parker Filtration. Ø4 G 1 /4 Ø4 G 3 /8 2 /F HEX G 1 /4 Ø R 1 /2 Ø4 R 3 /4 6 2 /F HEX G 3 / /F HEX /F HEX 9 14 R 1 /2 R 3 /4 38 FDHB5UK.

Screw-On Type ir Breathers - Specification Option 3 G 3 /8, G 1 /2 and (Ø7) Construction: Mouldings in glass-filled nylon and glass coupled polypropylene.

Pressurisation options:.2,.35 and.7 bar crack pressure. Pressure Drop Flow Curve Pressurisation valve: Nylon. Dipstick: vailable for use with G 3 /8, G 1 /2 and.

Ordering Information Δp (bar).14.12.1.8.6.4 G3/8 G1/2 G3/4 Option 3 G 3 /8, G 1 /2 and B68511 B68711 B68611 SB.511 SB.711 SB.

7 Screw-On Type ir Breathers - Specification Option 3 G 3 /8, G 1 /2 and (Ø7) Construction: Mouldings in glass-filled nylon and glass coupled polypropylene. Element: Expanded Polyurethane foam, 1 micron absolute. Seals: Nitrile. Pressurised air breathers: vailable G 3 /8, G 1 /2 and, 3 pressure options to maintain a positive pressure in a reservoir. Pressurisation options:.2,.35 and.7 bar crack pressure. Pressure Drop Flow Curve Pressurisation valve: Nylon. Dipstick: vailable for use with G 3 /8, G 1 /2 and. Dipstick material: Mini-series in brass. Hi/Lo indicators: cetal adjustable red/green level indicators. Dipstick lengths: 2mm and 4mm (packs of 1). Breather weights:.75kg, Mini-series.19Kg. Ordering Information Δp (bar) G3/8 G1/2 G3/4 Option 3 G 3 /8, G 1 /2 and B68511 B68711 B68611 SB.511 SB.711 SB.611 Description G 3 /8 Un-pressurised Un-pressurised G 1 /2 Un-pressurised Note 1: s featured with bold highlighted codes will Flow I/sec (ir) Ø7 G 3 /8 G 1 /2 Ø7 The mini-series breather Screw-on option Push-fit option Ø G 3 /8 28 /F HEX G 1 /2 28 /F HEX Ø min Ø22 Spotface Ø Ø Ø11.8 G 1 / Ø13.55 Ø S683 Description Gearbox air breather 31 /F HEX 39 FDHB5UK.

Filler Breathers (Metal) Metal irbreather/filler breather Specification Ø76.2 Locking lug option (5561) 153.5 58.2 43.

8 Filler Breathers (Metal) Metal irbreather/filler breather Specification Ø76.2 Locking lug option (5561) For added security, certain Parker Filtration Metal Filler Breather Filters can be specified with a locking lug option. Ø49.5 Ø83 Note: Dimensions relate to 1163 and 173 options. Note: Max. operating temperature = +9 C. Ordering Information Standard products table Replacement cap Displacement I/min Crack pressure Micron rating ir flow m 3 /min Thread Weight SB15621 SB15631 B11631 B PB17315 PB17311 SP SP SB SB B B PB PB SP SP CP CP.1381 CP CP Threaded airbreather (unpressurised) Filler breather - filter flange type (unpressurised) 43 Filler breather - filter flange type (pressurised) CP bar CP bar ir breather - threaded type (pressurised) Note 1: s featured with bold highlighted codes will CP CP bar.7 bar G 1 /4.2kg.6kg.24kg.8kg.24kg.27kg.27kg.2kg.2kg 31 FDHB5UK.

1731 - (Pressurised) - 1562 (Un-pressurised) - Threaded type Displacement: 43 l/min. Micron rating: ir flow:.45m 3 /min. Weight:.2 Kg. Thread:. Valve crack-pressure 1731:.35 and.7 bar. 43.4 6 Ø76.

2 Kg. 1563 =.6 Kg. Thread: 1562 =. 1563 = G 1 /4. 36.5 7 G 1 /4/ 13 56.5 16 /F HEX 138 - Filter flange type Ø44.5 Displacement: 135 l/min. Micron rating: ir flow:.15m 3 /min. Weight:.8 Kg.

and Ø4.4 (dependant on the material and thickness, consult Parker Filtration) equispaced on 7.-73. P.C.D. to suit No. 1 thread forming screws supplied. 2.

Un-pressurised 3 hole fixing (Type 138) Form 3 off tank mounting holes between Ø5.25 5.35 mm equispaced on 41.3 P.C.D. to suit No. 1 thread forming screws supplied.

9 (Pressurised) (Un-pressurised) - Threaded type Displacement: 43 l/min. Micron rating: ir flow:.45m 3 /min. Weight:.2 Kg. Thread:. Valve crack-pressure 1731:.35 and.7 bar Ø /F HEX Threaded type (Un-pressurised) Ø44.5 Displacement: 1562 = 43 l/min = 135 l/min. Micron rating: ir flow: 1562 =.45m 3 /min =.15m 3 /min. Weight: 1562 =.2 Kg =.6 Kg. Thread: 1562 = = G 1 / G 1 /4/ /F HEX Filter flange type Ø44.5 Displacement: 135 l/min. Micron rating: ir flow:.15m 3 /min. Weight:.8 Kg Ø51 Note: Tank hole diameter = 3mm. Note: Funnel diameter = 28mm. Tank installation notes 1. Un-pressurised 6 hole fixing (Type 1163) Form off tank mounting holes between Ø4. and Ø4.4 (dependant on the material and thickness, consult Parker Filtration) equispaced on P.C.D. to suit No. 1 thread forming screws supplied. 2. Pressurised 6 hole fixing (Type 173) Form 6 off mounting holes between Ø4. and Ø4.4 equispaced on 73. P.C.D. to suit No. 1 thread forming screws supplied. 3. Un-pressurised 3 hole fixing (Type 138) Form 3 off tank mounting holes between Ø mm equispaced on 41.3 P.C.D. to suit No. 1 thread forming screws supplied. Breather Units Ordering Information Small Breather Specification Ø35 H2791 H2792 H2793 H279-1 H279-2 H279-3 Description Small breather 1 /4 BSPT thread Small breather 3 /8 BSPT thread Small breather 1 /2 BSPT thread 22 Three size: 1 /4 BSPT 3 /8 BSPT 1 /2 BSPT FDHB5UK.

Lockable Filler Breather Installation Details Tank Mounting 51.

locking screws push on type at positions X, Y and Z X 5.

29 Δp (PSID) 5 1 15 2 Flow (l/min) Ordering Information LFC622142 LFC622212 LFC622242 LFC622432 LFC622122 LFC622222 LFC622411 Description Non-breathing (No element)

10 Lockable Filler Breather Installation Details Tank Mounting 51.5 Ø51 Strainer off equispaced clamps Ø Tank mounting hole Flap to protect lock Stand Pipe Mounting 2 locking screws threaded type at positions X and Y 3 locking screws push on type at positions X, Y and Z X 5.5 Z B Y Lockable Filler Breather Selection Total assembly pressure drop flow curve 1μ elements Flow (US GPM) μ Δp (bar) Δp (PSID) Flow (l/min) Ordering Information LFC LFC LFC LFC LFC LFC LFC Description Non-breathing (No element) Clamp mounting with strainer 1μ nom element, G2 thread with strainer 1μ nom element, clamp mounting with strainer 1μ nom vented (air in) push on mounting with strainer Non-breathing (No element) 2 1 /2 BSP thread with strainer 1μ nom element, G2 1 /2 thread with strainer 1μ nom vented (air in) G2 thread without strainer Note 1: s featured with bold highlighted codes will 312 FDHB5UK.

AN INNOVATIVE GREEN FILTER FEATURING

AN INNOVATIVE GREEN FILTER FEATURING Co-Polymer and Steel Reservoirs Hydraulic Reservoir Solutions Tailormade solutions for reservoirs Supporting hydraulic system designers with reservoir solutions N INNOVTIVE GREEN FILTER FETURING LEIF LEIF