ATZ 300 (2 1 /2 SAE FLANGE) Empty Housing Flow (US GPM) p (PSID) p (bar)

Transcription

1 Pressure Drop Curves The recommended level of the initial pressure drop for suction filters is.3 bar. If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows: p = ( p32 x viscosity of medium used) / 32cSt. Filter housing and element pressure drop based on 32cSt fluid viscosity and.87 density. TZ -2 (G /2) Empty Housing TZ 3 (2 /2 SE FLNGE) Empty Housing TZ2 Filter Element Q.6 Q..4 Q.3 2Q TZ3 Filter Element (cellulose and stainless steel) C 2W W TZ2 Filter Element (cellulose and stainless steel) C. 4W.73 2W TZ3 Filter Element Q Q Q. 2Q Low pressure filters

2 Suction Filters TZ Series Ordering Information Standard products table Part number TZCBPXG24 TZQBPXG24 TZ2CBPXR48 TZ2QBPXR48 Supersedes TZ2-G /2 FXX-R- B M TZ2-G /2 FXW-R- B M TZ3-S2 /2-C FXX3- B M TZ3-S2 /2-C FXW3- B M Flow (l/min) Model number TZ2 TZ2 TZ3 TZ3 Element length Media rating (µ) NOM BS NOM BS Seals Indicator Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above. Bypass settings Blocked Blocked Blocked Blocked Ports G /2" G /2" 2 /2" SE-3 PSI 2 /2" SE-3 PSI Included options None None None None Replacement elements Q Q Supersedes FXX-R- FXW-R- FXX3- FXW3- Product configurator Configurator example TZ filter Box TZ Box 2 2 Box 3 C Box 4 B Box U2 Box 6 X Box 7 R48 Box 8 Box TZ Box 2 Housing TZ -2 TZ 2-3 Filter type 2 Box 3 Element media Disposable element Cellulose Nom. rating C Degree of filtration Glass fibre Microglass III (for disposable elements) 2Q Q Q 2Q Wire mesh bs. rating 4W Box 4 Seal material Neoprene Seal type B V N Box Indicator Vacuum gauge, setting -. bar, Mx Vacuum gauge, setting -.3 bar, Mx Vacuum switch 42V, -. bar setting, NO/NC, M x Vacuum switch 42V, -.3 bar setting, NO/NC, M x Vacuum switch 2 VC, -. bar setting, NO/NC, M x Vacuum switch 2 VC, -.3 bar setting, NO/NC, M x No indicator, indicator ports not machined No indicator, indicator port plugged Other settings for indicators / gauges on request U U2 V V2 V3 V4 N P on request Box 6 Bypass valve Blocked bypass Bypass valve X Box 7 Filter connection Ports G /2" + 2 x G" (For TZ -2 only) 2 /2" SE-3 PSI +2 x G /2" (For TZ 2-3 only) TZ -2 Part number spare element TZ 2-3 Part number spare element FXX-R FXX G24 R48 Highlights Key (Denotes part number availability) ßx(c)=2.% 6 Item is standard Item is standard green option Item is semi standard Item is non standard Note: Standard items are in stock, semi standard items are available within four weeks FXW-R Q FXW Q Box 8 Spare element table FXW-R Q FXW Q Options for TZ -2 x G /2" + x G" plugged Not plugged x G" right plugged 2 x G" left & right plugged Special Options for TZ 2-3 x SE6 plugged Not plugged Special verage filtration beta ratio ß (ISO 6889) / particle size µm [c] ßx(c)= ßx(c)=7 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% 6 Degree of filtration 98.7% % % % FXW-R Q FXW Q Options Media code 2Q Q Q 2Q FXW-R Q FXW Q SF-R SF Q R P on request Q on request indicator Setting -.3 bar Thread connection Mx FMUV2VBMML switch Setting -.3 bar Thread connection Mx Switch type NO or NC Elec.connection MP terminal 6.3x.8 Protection IP4 (terminal IP) Performance 2-2 VC (Li,, Lr 2, max) 2-28 Vdc (Li,, Lr3, max) FMUU2VBMML Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: lternate displayed part number selection will require you to contact Parker Filtration for availability. 72 Parker Hannifin Hydraulic Filter Division Europe FDHB2UK. Section 8

3 /4/8CN Series MX 6 I/min - 7 bar FETURING 73 Medium pressure filters

4 /4/8CN Series Features & Benefits Features 6 bar fatigue rating (eight times that of a spin-on) Diametral (side) seal between head and bowl Dust seal 4CN-2 meets automotive HF3 standard CN meets automotive HF2 standard Cast aluminium head Reinforced Microglass III replacement elements Complete performance data disclosure, electrical or electronic indicators available Coreless Ecoglass III replacement elements dvantages bility to provide reliable service under tough cyclic operating conditions Can be utilised in applications where high pressure filters may have been only option Proven reliability in cyclic applications Reduced importance of bowl torque Prevents contamination from building up on bowl/head threads utomotive industry acceptance Low profile, lightweight and durable Multi-layered design produced high capacity and efficiency Wire support reduces pleat bunching, keeps performance consistent ll pertinent information is provided in an easy-tocompare format Check element condition at a glance Right style for the application No metal content in element Reduced overall weight of % Easy compaction of used elements Conversion kits available: new bowl with permanent core Benefits Reduced downtime due to premature filter failures Reduced costs, better fit for the application No downtime, no leaks Performs with real world service Easier service, eliminates thread galling Satisfies specifications without need for further testing and/or approval Less weight, smaller envelop and cleaner appearance Great performance value Reliable performance throughout element life Reduces downtime, maximises element life No hidden deficiencies Easy selection of proper filtration Optimise element life, prevent bypassing Matches your system electrical connections Environmentally friendly disposal by incineration Lower element replacement costs Lower disposal cost Retrofit coreless design to housings already installed Typical pplications Compressor lube oil Off-line filter loops Machine tools (utomotive standard) Hydrostatic drive charge pumps Mobile equipment Pilot lines for servo controls Oil patch drilling equipment Injection moulding The Parker Filtration /4/8CN Series Medium Pressure Filters. This partial list of applications for Parker CN Series Filters has a common factor, the need for an economical, medium pressure range filter with excellent fatigue pressure ratings. Prior to the availability of the CN filter, applications such as those listed were restricted by limitations of a spin-on can, or forced into the higher-cost range of high pressure filters. The CN Series fills this gap and is now available with environmentally friendly Ecoglass III elements. 74 Parker Hannifin Hydraulic Filter Division Europe FDHB2UK. Section 9

5 Specification Pressure ratings: Maximum allowable operating pressure: Rated fatigue pressure: 7 bar 6 bar Connections: Several threaded port options available, flange faced ports available on 8CN. Connection style Model CN 4CN 8CN BSPF(G), 3 /4 /4, /2 /2, 2 SE 2, 6 6, 24 24, 32 ISO 649 M27 M33 M42, M48 Metric 3-M 2 Filter housing: Head material aluminium. Bowl material hard anodized aluminium. Seal material: or fluoroelastomer. Operating temperature range: -2 C to + C. Bypass valve & indicator settings: Table following gives bypass valve and corresponding indicator setting. Bypass Indicator.7 bar.2 bar 2. bar Filter element: Degree of filtration: Determined by Multipass-test according to ISO Flow fatigue characteristics: Filter media is supported so that the optimal fatigue life is achieved (ISO 3724). Microglass III (available by request) Supported with epoxy coated metal wire mesh, end cap material reinforced composite and metal inner core. Collapse rating 2 bar (ISO 294). Ecoglass III Supported with plastic net, end cap material reinforced composite. No metal parts. Collapse rating bar (ISO 294). Filter element can only be used together with bowl including Eco-adaptor. Note: Ecoglass III contributes to ISO 4 quality. Indicator options: - visual M3. - electrical T. - electronic F(PNP). - electronic F2(NPN). For indicator details see catalogue section 6. Weights (kg): Model CN..6 4CN CN Fluid compatibility: Suitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration. CN H I N 4CN H J N 8CN H J N F G L K F G L K G L K F J I I M D M D M D C C C B P B P B P Element removal clearance 6mm (2. ) 2.4 (.) Nominal Hex E SE - 4 Drain plug Element removal clearance 6mm (2. ) 2.4 (.) Nominal Hex E SE - 4 Drain plug Element removal clearance 6mm (2. ) 2.4 (.) Nominal Hex E SE - 4 Drain plug Dimensions in mm (inch) Model B C D E F G H I J K L M* N P CN 4CN 8CN 6.6 (6.7) 7.8 (6.73) 28.9 (.6) 2.7 (9.87) (.33) 4.6 (.8) 46. (.83) 62. (2.44) 77.7 (3.6) 2.4 (.9) 32.6 (.28) 49. (.9) 7. (2.8) 7.2 (4.22) 24.8 (4.9) 8.9 (3.38) 27. (.) 8.7 (6.2) 73.2 (2.88). (4.37) 82.6 (3.2) 82.6 (3.2) (4.8).4 (.96) 38. (.) 62. (2.44).6 (4.) 2 (.9) 3.8 (.2) 4. (.62) 4 (.69) 8.8 (2.32) 79.4 (3.2) 36.6 (.44) 6.2 (2.37) 4.3 (.63) xM6-.x7.9 deep 4xM8-.2x3 deep 4xM8-.2x6 deep 2-27 Nm 7-68 Nm 8-9 Nm Note: add 4mm for T and F indicators 7 Medium pressure filters

6 /4/8CN Series 8CN Flange Face Details (SE 2 3-M) Flange face mounting holes M2-.7 x 22 deep Pressure Drop Curves With.7 bar bypass the recommended initial pressure drop is max. bar. With bypass the recommended initial pressure drop is max. bar. If the medium used has a viscosity different from 3 cst, pressure drop over the filter can be estimated as follows: The total p = housing ph + (element pe x working viscosity/3). CN- Elements CN Empty Housing QE QE QE QE /4 Nominal Port Size Nominal Port Size 8 CN-2 Elements QE 2.. QE QE 2QE Parker Hannifin Hydraulic Filter Division Europe FDHB2UK. Section 9

7 Pressure Drop Curves 4CN- Elements 4CN Empty Housing QE QE. QE Nominal Port Size.. 2QE. /2 Nominal Port Size CN-2 Elements QE 2. QE. QE. 2QE CN- Elements 8CN Empty Housing QE QE QE. 2QE /2 Nominal Port Size 2 Nominal Port Size CN-2 Elements QE QE. QE 2QE Medium pressure filters

8 /4/8CN Series Element Service. Stop the system s power unit. B. Relieve any system pressure in the filter line. C. Drain the filter bowl if drain port option is provided. D. Loosen and remove bowl. E. Remove element by pulling downward with a slight twisting motion and discard. F. Check bowl o-ring and anti-extrusion ring for damage and replace if necessary. G. Lubricate element o-ring with system fluid and place on post in filter head. H. Install bowl by rotating counter clockwise and tighten to specified torque. CN 2-27 Nm (-2ft. lbs) 4CN 7-68 Nm (42-ft. lbs) 8CN 8-9 Nm (6-7ft. lbs) I. Confirm there are no leaks after powering the system. 3 2 CN Filters Parts List Index Description Head Indicators M3-visual auto reset:.2 bar M3-visual auto reset: 2. bar T-electrical:.2 bar c/w DIN 436 connector T-electrical: 2. bar c/w DIN 436 connector F-electronic PNP with 4 LEDs:.2 bar F-electronic PNP with 4 LEDs: 2. bar F2-electronic NPN with 4 LEDs:.2 bar F2-electronic NPN with 4 LEDs: 2. bar Bypass valve.7 bar assembly assembly Element (see replacement element part numbers) Bowl Single length with drain Single length with reusable core and drain Single length without drain Double length with drain Double length with reusable core and drain Double length without drain Bowl and dust seal Drain plug: SE Parker Hannifin Hydraulic Filter Division Europe FDHB2UK. Section 9

9 Ordering Information Standard products table Part numbers CNQEVTKG64 CNQEVM3KG64 CN2QEVTKG64 CN2QEVM3KG64 CN2QEVTKG64 CN2QEVM3KG64 CN22QEVTKG64 CN22QEVM3KG64 4CNQEVTKG244 4CNQEVM3KG244 4CNQEVTKG244 4CNQEVM3KG244 4CN2QEVTKG244 4CN2QEVM3KG244 4CN2QEVTKG244 4CN2QEVM3KG244 4CN2QEVTKG244 4CN2QEVM3KG244 4CN22QEVTKG244 4CN22QEVM3KG244 8CNQEVTKG324 8CNQEVM3KG324 8CN2QEVTKG324 8CN2QEVM3KG324 8CN2QEVTKG324 8CN2QEVM3KG324 8CN22QEVTKG324 8CN22QEVM3KG324 Supersedes F3CNRQETW3C2C29 F3CNRQEM2C2C29 F3CNR2QETW3C2C29 F3CNR2QEM2C2C29 F3CN2RQETW3C2C29 F3CN2RQEM2C2C29 F3CN2R2QETW3C2C29 F3CN2R2QEM2C2C29 F34CNRQETW3E2E29 F34CNRQEM2E2E29 F34CNRQETW3E2E29 F34CNRQEM2E2E29 F34CNR2QETW3E2E29 F34CNR2QEM2E2E29 F34CN2RQETW3E2E29 F34CN2RQEM2E2E29 F34CN2RQETW3E2E29 F34CN2RQEM2E2E29 F34CN2R2QETW3E2E29 F34CN2R2QEM2E2E29 F38CNRQETW3F2F29 F38CNRQEM2F2F29 F38CNR2QETW3F2F29 F38CNR2QEM2F2F29 F38CN2RQETW3F2F29 F38CN2RQEM2F2F29 F38CN2R2QETW3F2F29 F38CN2R2QEM2F2F29 Flow (l/min) Model number CN CN CN CN CN CN CN CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 8CN 8CN 8CN 8CN 8CN 8CN 8CN 8CN Element length Media rating (µ) Note: Filter assemblies ordered from the product configurator on next page are on extended lead times. Where possible, please make your selection from the table above Seals Indicator Bypass settings Ports G" G" G" G" G" G" G" G" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G2" G2" G2" G2" G2" G2" G2" G2" Replacement elements 9367Q 9367Q 9367Q 9367Q 93674Q 93674Q 9367Q 9367Q 93677Q 93677Q 93678Q 93678Q 93679Q 93679Q 9367Q 9367Q 9366Q 9366Q 93672Q 93672Q 93662Q 93662Q 9367Q 9367Q 93678Q 93678Q 93679Q 93679Q 79 Medium pressure filters

10 /4/8CN Series Ordering Information (cont.) Product Configurator Box Box 2 4CN 2 Box 3 QE Box 4 V Box M3 Box 6 K Box 7 G24 Box 8 4 Box Model Small size MP filter, T-port Medium size MP filter, T-port Large size MP filter, T-port CN 4CN 8CN Box 2 Length Filter type 2 Highlights Key (Denotes part number availability) Item is standard Item is standard green option Item is semi standard Item is non standard Note: Standard items are in stock, semi standard items are available within four weeks Box 3 Element media Ecoglass III element Degree of filtration Glass fibre 2QE Media code QE QE 2QE Box 4 Seal material Seal type V B Note: When using Ecoglass III elements a bowl with reusable Eco-adaptor is required. Filter assemblies with Microglass III elements are available by request Box No indicator port indicator indicator with steel plug Electronic 4 LED, PNP, N.O. Electronic 4 LED, NPN, N.O. Electronic 4 LED, PNP, N.C. Electronic 4 LED, NPN, N.C. Box 8 Options Options Standard drain port on bowl Indicator 4 N M3 T P F F2 F3 F4 Box 6 Bypass valve.7 bar Bypass valve Indicator.2 bar 2. bar G K When filter includes a bypass valve but not an indicator, code denotes bypass setting. Box 7 Ports CN:Thread G 3 /4 Thread G Thread SE 2 Thread SE 6 Thread M27, ISO649 4CN:Thread G /4 Thread G /2 Thread SE 6 Thread SE 24 Thread M33, ISO649 8CN:Thread G /2 Thread G2 Thread SE 24 Thread SE 32 Thread M42, ISO649 Thread M48, ISO649 SE flange 2" 3-M Filter connection G2 G6 S2 S6 M27 G2 G24 S6 S24 M33 G24 G32 S24 S32 M42 M48 R32 Ecoglass III elements ( seals) Model CN- CN-2 4CN- 4CN-2 8CN- 8CN-2 2QE Q 93672Q 93676Q 9367Q 93673Q 93676Q QE Q 93673Q 93677Q 9367Q 93674Q 93677Q QE 9367Q 93674Q 93678Q 9366Q 93662Q 93678Q Conversion bowl assembly (to retrofit existing CN filter housings to use coreless elements) CN- coreless element bowl assembly CN-2 coreless element bowl assembly CN- coreless element bowl assembly CN-2 coreless element bowl assembly CN- coreless element bowl assembly CN-2 coreless element bowl assembly 2QE 9367Q 9367Q 93679Q 93672Q 9367Q 93679Q Model CN 4CN 8CN Model CN- CN-2 4CN- 4CN-2 8CN- 8CN-2 Elements with nitrile seals 2Q 92893Q 92893Q Q Q 93266Q Q Seal kits S4449 S4447 S448 Q G44Q G469Q G448Q G467Q 93267Q Q * S44 S4448 S449 Replacement element part numbers for conventional assemblies Q Q 92892Q 92683Q Q 93268Q Q 2Q 93367Q 93368Q 9399Q 938Q Q Q Elements with seals Model CN- CN-2 4CN- 4CN-2 8CN- 8CN-2 2Q 9326Q 93266Q 92676Q 92677Q 93269Q 93266Q Q G489Q G49Q G49Q G492Q 93266Q Q Q 93262Q 93268Q Q Q 83266Q Q 2Q 93369Q 9337Q 93Q 939Q 92993Q Q ßx(c)=2.% 6 verage filtration beta ratio ß (ISO 6889) / particle size µm [c] ßx(c)= ßx(c)=7 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% 6 Degree of filtration 98.7% % % 6 2 Please note the bolded options reflect standard options with a reduced lead-time of (4) weeks or less. Consult Parker Filtration on all other lead-time options. 99.9% Metal free Ecoglass III 2QE QE QE 2QE Nominal flow (l/min) for filter assembly at viscosity 3cSt Housing, port size CN-, G CN-2, G 4CN-, G /2 4CN-2, G /2 8CN-, G2 8CN-2, G2 2QE QE QE QE * s are available under various registered trademarks, including Viton (a registered trademark of DuPont) and Fluorel (a registered trademark of 3M) 8 Parker Hannifin Hydraulic Filter Division Europe FDHB2UK. Section 9

11 4M/4M Eco Series MX 26 I/min - 4 bar FETURING 8 Medium pressure filters

12 4M/4M Eco Series Features & Benefits Features Cast iron head, steel bowl Reinforced Microglass III replacement elements, electrical or electronic indicators available Test points in the filter head Coreless Ecoglass III replacement elements dvantages Can be used in applications where aluminium is not allowed Rugged construction Multi-layered design produced high capacity and efficiency Wire support reduces pleat bunching, keeps performance consistent Check element condition at glance Right style for the application Pressure measurement and p possible No metal content in element Reduced overall weight of % Easy compaction of used elements Eco adaptors available Benefits pproved for engine rooms and mines Reliable filtration in all conditions Great performance value Reliable performance throughout element life Reduces downtime, maximises element life Optimise element life, prevent bypassing Matches your system electrical connections Quick testing and maintenance Environmentally friendly disposal by incineration Lower element replacement costs Lower disposal costs Retrofit coreless design to housings already installed Typical pplications Industrial power units Mobile construction equipment Forestry equipment The Parker Filtration 4M/4 Eco Series Medium Pressure Filters. The 4M/4 Eco Series of medium pressure filters offer an ideal solution to the problem of protecting system components at lower pressures. These filters are a realistic, high quality alternative to low specification spin-on filters. The 4M/4 Eco Series offers high dirt holding capacity, 4 bar capability and rapid element replacement. 82 Parker Hannifin Hydraulic Filter Division Europe FDHB2UK. Section

13 Specification Pressure ratings: Maximum allowable operating pressure 4 bar. Filter housing pressure pulse fatigue tested: 6 pulses -4 bar. Connections: Threads G, G /4 (ISO 228/) or flange SE /2 3-M. Filter housing: Head material cast iron (GSI). Bowl material steel. Seal material: or. Operating temperature range: -2 to + C Bypass valve: Opening pressure. Filter element: Degree of filtration: Determined by Multipass-test according to ISO Flow fatigue characteristics: Filter media is supported so that the optimal fatigue life is achieved (ISO 3724). Microglass III: Supported with epoxy coated metal wire mesh, end cap material reinforced composite and metal inner core. Collapse rating 2 bar (ISO 294). Ecoglass III: Supported with plastic net, end cap material reinforced composite. No metal parts. Collapse rating bar (ISO 294). Filter element can only be used together with reusable FE Eco-adapter. Note: Ecoglass III contributes to ISO 4 quality. Indicator options: Indicating differential pressure: 2. ±.3 bar. - visual M3. - electrical T. - electronic F(PNP). - electronic F2(NPN). For indicator details see catalogue section 6. Fluid compatibility: Suitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration. Installation Details Plug M2x. Type B C Weight (kg) D 6 (4.7) 237 (9.33) 92 (7.6).9 28 (8.2) 33 (3.) 28 (.22) 6.2 G, G /4, G /2, D OUT IN D Length (3.) 4 (7.72) 4 (.94) 6.6 Flange SE /2 3-M Length (6.8) (2.6) (9.9) (2.7) 4 pcs M2 depth 8 only model SE 3.7 (.4) 38 (.) M depth 2 C B mm (inches) 32 (.2) 7 (2.7) 66 (2.6) min (2.) 39 (.3) 8 (2.28) 83 Medium pressure filters

14 4M/4M Eco Series Pressure Drop Curves The recommended level of the initial pressure drop is max. bar. If the medium used has a viscosity different from 3 cst, pressure drop over the filter can be estimated as follows: The total p = housing ph + (element pe x working viscosity/3). 4M Series Empty Housing G6 G2 G24 R M- Element with Microglass III 4M-2 Element with Microglass III Q.2 Q Q 2Q Q Q Q 2Q M-3 Element with Microglass III 4M-4 Element with Microglass III Q Q 2Q Q Q Q Q 2Q Parker Hannifin Hydraulic Filter Division Europe FDHB2UK. Section

15 4M- Element with Ecoglass III 4M-2 Element with Ecoglass III QE QE 2QE QE QE QE QE QE M-3 Element with Ecoglass III 4M-4 Elements with Ecoglass III QE QE QE QE QE QE QE QE Ordering Information Standard products table Product numbers 4MQBPKG6 4M2QBPKG6 4MQEBPKG6 4M2QEBPKG6 4M2QBPKG2 4M22QBPKG2 4M2QEBPKG2 4M22QEBPKG2 4M3QBPKG24 4M32QBPKG24 4M3QEBPKG24 4M32QEBPKG24 Supersedes FF4.Q.BS3.GT6 FF4.Q2.BS3.GT6 FF4.QE.BS3.GT6 FF4.QE2.BS3.GT6 FF46.Q.BS3.GT2 FF46.Q2.BS3.GT2 FF46.QE.BS3.GT2 FF46.QE2.BS3.GT2 FF47.Q.BS3.GT24 FF47.Q2.BS3.GT24 FF47.QE.BS3.GT24 FF47.QE2.BS3.GT24 Flow (l/min) Model number 4M 4M 4M 4M 4M 4M 4M 4M 4M 4M 4M 4M Element length Length 3 Length 3 Length 3 Length 3 Media rating (µ) Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above. Note : Part numbers featured with bold highlighted codes will ensure a standard product selection Seals Indicator Bypass settings Ports G" G" G" G" G /4" G /4" G /4" G /4" G /2" G /2" G /2" G /2" Replacement elements Q Q Q Q Q Q Q Q 93897Q 93897Q Q Q Supersedes FC7.Q.BK FC7.Q2.BK FC7.QE.BK FC7.QE2.BK FC76.Q.BK FC76.Q2.BK FC76.QE.BK FC76.QE2.BK FC77.Q.BK FC77.Q2.BK FC77.QE.BK FC77.QE2.BK 8 Medium pressure filters

16 4M/4M Eco Series Ordering Information (cont.) Product configurator Box Box 2 4M 2 Box 3 Q Box 4 B Box M3 Box 6 K Box 7 G2 Box 8 Box Box 2 Length Length 3 Length 4 Filter type Model Medium pressure filter, T-port Box 3 4M Element media Microglass III element Ecoglass III element Degree of filtration Glass fibre 2Q 2QE Highlights Key (Denotes part number availability) Item is standard Item is standard green option Item is semi standard Item is non standard Note: Standard items are in stock, semi standard items are available within four weeks Q QE Media code Q QE Note: When using Ecoglass III elements a bowl with reusable Eco-adaptor is required. 2Q 2QE Box 4 Seal material Seal type B V Box with steel plug indicator indicator Electronic 4 LED, PNP, N.O. Electronic 4 LED, NPN, N.O. Electronic 4 LED, PNP, N.C. Electronic 4 LED, NPN, N.C. Indicator P M3 T F F2 F3 F4 Box 6 Bypass valve No bypass* No bypass* Bypass valve Indicator 2. bar 7. bar No indicator (P) K N X * High collapse element must be used if MOP is higher than element collapse pressure. When filter includes a bypass valve but not an indicator, code denotes bypass setting. + Box 8: code 2 + Box 8: code 2 Box 7 Connections Thread G Thread G /4 Thread G /2 SE flange /2" 3-M G6 G2 G24 R24 vailability: S = standard option x = non-standard, ask for availability Filter connection S S x x S S S x Length 3 S S S x Length 4 x S S x Box 8 Options Standard No bypass Options 2 Media 2Q Q Q 2Q 2QE QE QE 2QE Replacement elements with nitrile seals 93896Q 93896Q Q Q Q Q Q Q Q 93896Q Q Q 93898Q 93898Q Q Q Length Q Q 93897Q 93897Q Q 93898Q Q Q Length Q Q Q 93897Q Q Q 93899Q 93899Q Nominal flow (I/min) at viscosity 3 cst - connection size Filter length Length 3 Length 4 Media 2Q/2QE Q/QE Q/QE 2Q/2QE 2Q/2QE Q/QE Q/QE 2Q/2QE 2Q/2QE Q/QE Q/QE 2Q/2QE 2Q/2QE Q/QE Q/QE 2Q/2QE G G G24 & R ßx(c)=2.% 6 Degree of filtration verage filtration beta ratio ß (ISO 6889) / particle size µm [c] ßx(c)= ßx(c)=7 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% % % % % Disposable Microglass III 2Q Q Q 2Q Metal free Ecoglass III 2QE QE QE 2QE 86 Parker Hannifin Hydraulic Filter Division Europe FDHB2UK. Section

17 3 Eco Series MX I/min - 3 bar FETURING 87 Medium pressure filters

18 3 Eco Series Features & Benefits Features Modular filter system Duplex type systems with selecting valve Bypass assembly in the filter cover Large filtration area ir bleed valve Two indicator locations, visual indicator as standard Coreless Ecoglass III replacement elements dvantages Sizing and performance can be optimised Element change during operation Sediment and other particles at the bottom are away from the flow entering the system High dirt holding capacity Easy air removal after element change Easy to detect when element replacement needed No metal content in element Reduced overall weight of % Easy compaction of used elements Conversion kits available: new bowl with permanent core Benefits Best filter for every lube application Continuous filtration No contamination passing into the system if filter in bypass Long element life Protects bearings and other sensitive components Reliable filtration Environmentally friendly disposal by incineration Lower element replacement costs Lower disposal costs Retrofit coreless design to housings already installed Typical pplications Paper production plants Steel mills luminium mills Industrial power packs Lubrication systems Power generation The Parker Filtration 3 Eco Series Medium Pressure Filters. These high flow return filters are ideal for industrial applications on hydraulic or lubrication systems with pressures up to 3 bar and flows up to l/min in single units. Multiple filter systems with pressures up to 6 bar and flows up to 4 l/min. The ability to bank multiple filters together in a duplex format enables continuous filtration during element changes. 88 Parker Hannifin Hydraulic Filter Division Europe FDHB2UK. Section

19 Specification Pressure ratings: Maximum allowable operating pressure: Single filters 3 bar. Filter systems 6 bar. Filter housing pressure pulse fatigue tested: 6 pulses -2 bar. Construction: Eco-element does not include any metal parts and is supported by Eco-adaptor. Conventional elements can be used without removing the Eco-adaptor. Connections: Single unit connections: Flanges SE 2 3-M, SE 2 /2 3-M or with adaptor threads G /2 or G2. Dual unit connections: Flanges SE 3 3-M or with adaptor threads G /2 or G2. Parallel unit and filter system assembly connections: DN8/PN6 or DN/PN6. ssembly of two, four six or eight filters to the same system by using L-bore valve assembly (only one side in use). Filter housing: Material aluminium. Seal material: or. Operating temperature range: -2 C to + C. Bypass valve: Opening pressure. Filter element: Degree of filtration: Determined by Multipass-test according to ISO Flow fatigue characteristics: Filter media is supported so that the optimal fatigue life is achieved (ISO 3724). Ecoglass III: Supported with plastic net, end cap material reinforced composite. No metal parts. Collapse rating bar (ISO 294). Filter element can only be used together with reusable FE Eco-adapter. Note: Ecoglass III contributes to ISO 4 quality. lso available with Microglass III elements. Contact Parker Filtration for details. indicator: Includes M3, full part number FMUM3KVMU2H as standard. Optional Indicators (mounted to lower indicator port): - electrical T. - electronic F(PNP). - electronic F2(NPN). For indicator details see catalogue section 6. Fluid compatibility: Suitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration. Installation Details Single ssemblies 3M Body flange daptor flange Connection options SE 2 3-M SE 2 /2 3-M G /2 G2 SE 3 3-M (9 elbow) M2 8pcs G /2x2pcs G /8 Venting valve M2 4pcs Direction Torque Nm Ø96 Indicator M3 Weights (kg) Length 3 Single Dual D2 Parallel P2 System S2 System S9 System S6 System S8 Dimensions in mm =6 Length 3= G /2 42 Indicator port daptor flange In M2 4pcs Torque Nm daptor flange 28 Torque Nm OUT Option. can be rotated in 9 steps. 89 Medium pressure filters

20 3 Eco Series Dual System 3D G /2 x 2pcs G /8 Venting valve 97. Out In Out 9 27 In SE 3 flange SE 3 flange 9 Thread flange 3 Thread flange 3 Parallel System 3N Ø Supported from base Connection options Body flange daptor flange thread SE 3 3-M G /2 G2 G /2x2pcs G /8 Venting valve Type Length 3 Dimensions in mm Out 63 In In Out 9 29 Port Sizes DN8/PN6 or DN/PN Ø Supported from base 9 Parker Hannifin Hydraulic Filter Division Europe FDHB2UK. Section

21 3S System + units 3S System 2+2 units Indicator FPC V Indicator FPC V Drain valve G /2x2pcs 4 4 Drain valve G /2x2pcs S System 3+3 units 3S System 4+4 units Indicator FPC V Indicator FPC V Drain valve G /2x2pcs Medium pressure filters

22 3 Eco Series Valve ssembly Connection - T-Model G /2x2pcs G /8 Venting valve Type Length 3 Dimensions in mm Out Slow fill valve Out In Indicator port 9 Ø4 393/ /3 In Valve supported from base Port sizes DN8/PN6 or DN/PN6 L-Model C-Model G /2x2pcs G /8 Venting valve G /2x2pcs G /8 Venting valve Handle turns counter clockwise In Out 366/376 In 9 9 Ø4 Out 24 Indicator port 4 78 Ø4 393/ /3 4 49/ 293/33 Valve supported from base Valve supported from base 92 Parker Hannifin Hydraulic Filter Division Europe FDHB2UK. Section