Hydraulic Filtration & Contamination Control Products. Brochure: FDHB200UK (Low Pressure Section)

Transcription

1 Hydraulic Filtration & Contamination Control Products rochure: FDH2UK (Low Pressure Section)

2 Consistent quality Technical innovation Premier customer service Hydraulic, Lubrication & Coolant Filtration High-performance filtration systems for production machinery in industrial, mobile and military/marine applications. Parkers technical resources provide the correct filtration technologies that conform to your requirements. That s why thousands of manufacturers and equipment users around the world rely on Parker Filtration products and people. Worldwide Sales and Service Parker Filtration s global reputation as a reliable supplier of superior filtration products is the result of a focused and integrated development and manufacturing system. Parker Filtration consolidates quality filtration products, manufactured by process filtration, air and gas filtration and separation, fuel conditioning and filtration, hydraulic and lubrication filtration, fluid power products and fluid condition monitoring equipment into one broad-based range that covers many markets and most applications, as detailed here. Compressed Air & Gas Filtration Complete line of compressed air/gas filtration products; coalescing, particulate and adsorption filters in many applications in many industries. Process & Chemical Fluid Filtration Liquid filtration systems for beverage, chemical and food processing; cosmetic, paint, water treatment; photoprocessing; and micro-chip fabrication. Racor Fuel Conditioning & Filtration Parker air, fuel and oil filtration systems provide quality protection for engines operating in any environment, anywhere in the world. Photo courtesy of GLASAU HAHN. System Contamination Monitoring On-line dynamic particle analysis, off-line bottle sampling and fluid analysis and measurement of water content polluting the oil in a system. All important and achievable, cost-effective solutions available to equipment manufacturers and end users alike. Parker Hannifin Filter Division Europe FDH2UK.

3 Tanktop Mounted Return Line Filters ETF Series MAX 4 I/min - bar 5 Low pressure filters

4 Tanktop Mounted Return Line Filters ETF Series Features & enefits Features Co-polymer head Multiple return line ports Quick release cover Optional magnetic pre-filtration In-to-Out filtration Full flow bypass with low hysteresis Optional funnel Advantages Compact profile, lightweight and durable Flexibility related to return line hose(s) arrangement No tools required to release the filter cover Removes ferro particles, even during bypass conditions All captured contamination retains inside the element Reduction of bypass period due to low hysteresis Only a small part of the total flow is bypassing the element Ensures that oil enters the tank under the oil level enefits Less weight, smaller envelope and cleaner appearance More compact solutions can be realised Easy change of filter element Improved fluid cleanliness levels No recontamination of system during change of elements Improved protection of system Significant reduction of oil foaming Typical Applications Lorry mounted cranes Agricultural equipment Container hook loaders The Parker Filtration ETF Series Low Pressure Filters For tank top mounting installation. The ETF Series applies a reinforced co-polymer head equipped with two return ports and quick release cover. This filter represents an economic solution for hydraulic systems with nominal flows up to 4 l/min. Parker Hannifin Filter Division Europe FDH2UK. Section

5 Specification Pressure ratings: Max. bar. Assembly: Tank top mounted. Connections: Threads G + G (ISO 228), port supplied as plugged connection. Filter housing: Glass reinforced co-polymer material. Funnel made from steel. Seal material:. Operating temperature range: -2 to +8 C. ypass valve: Opening pressure. bar. Filter element: Conventional style element with steel end caps. Degree of filtration: Determined by multipass test according to ISO 889. Flow fatigue characteristics: Filter media is supported so that the optimum fatigue life is achieved. Filtration media: Microglass III. Element collapse rating: 8 bar (ISO 294). Indicator options: Setting.2 bar. Options: Magnetic pre-filtration. Fluid compatibility: Suitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration. Installation Details Dimensions mm (inches) A ETF45 ETF ETF9 ETF2 ETF4 82 (3.22) (4.7) 5 (5.9) 2 (7.87) 2 (.24) (3.94) 25 (4.92) 77 (.97) 225 (8.8) 3 (.8) mm (inches) 78.5 (3.9) 3 (.8) G A Ø 87 (3.42) 7 (2.75) Hole cut out Ø=9 (3.54) Ø 9 (.35) Port D 2 (2.44) Port C Port A 89 (3.5) 7 (4.2) 7 (2.75) Port 89 (3.5) 7 (4.2) 7 Low pressure filters

6 Tanktop Mounted Return Line Filters ETF Series Indicator Details Visual pressure indicator G2 mm (inches) 48 Vdc electrical indicator.2 bar S2/S3 mm (inches) 25 VAC electrical indicator.2 bar S4 mm (inches) G /8 3 (.22) Rotating part 3 38 (.49) 3 (.8) x3 (.8) 4 (.57) 7 (2.4) HEX 24 5 (2.2) 44 (.73) C3 2 NO NC 74 () 32 (.2) (.39) G /8K (.39) HEX 27 (.) G /8K Fixed part Option Description Connection/Voltage Wiring Part number G2 Visual indicator.2 bar FMUG2FMG2L S2/S3 Electrical indicator.2 bar 42 Vdc max Select either normally open (NO) or normally closed (NC) FMUS2FMG2L or FMUS3FMG2L Normally open contacts S4 Electrical indicator.2 bar 25 VAC max NC 2 NO 3 C FMUS4FMG2L Normally closed contacts 8 Parker Hannifin Filter Division Europe FDH2UK. Section

7 Pressure Drop Curves The recommended level of the initial pressure drop for low pressure filters is max.5 bar. If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows: p = ( p3 x viscosity of medium used) / 32cSt. ETF45 Filter Element Length ETF Filter Element Length Q 5Q Q 2Q Q 5Q Q 2Q ETF9 Filter Element Length 3 ETF2 Filter Element Length Q 5Q Q Q Q 5Q 2Q Q ETF4 Filter Element Length 4A Q 5Q Q 2Q Note: All pressure drop curves above show total pressure drop. i.e. they are combined housing and element curves. 9 Low pressure filters

8 Tanktop Mounted Return Line Filters ETF Series Ordering Information Standard products table Part number ETF2QP2FG4 ETF22QP2FG4 ETF3QP2FG4 ETF32QP2FG4 Supercedes FK23.Q.K.GX FK23.Q2.K.GX FK24.Q.K.GX FK24.Q2.K.GX Flow (l/min) 9 9 Model number ETF ETF ETF9 ETF9 Element length Length 2 Length 2 Length 3 Length 3 Media rating (µ) 2 2 Seals Indicator Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above. Plugged Plugged Plugged Plugged ypass settings. ar (22 Psi). ar (22 Psi). ar (22 Psi). ar (22 Psi) Ports 2xG (one port plugged) 2xG (one port plugged) 2xG (one port plugged) 2xG (one port plugged) Included options Diffuser type P Diffuser type P Diffuser type P Diffuser type P Replacement elements 93795Q 93795Q Q Q Supercedes FC23.Q.XS FC23.Q2.XS FC24.Q.XS FC24.Q2.XS Product configurator Configurator example of an ETF Series filter ox ox 2 ox 3 ox 4 ETF 3 Q ox 5 S2 ox F ox 7 G ox 8 ox ETF ox 2 Housing ETF -45 ETF - ETF -9 ETF -2 ETF -4 Filter type A ox 3 Disposable element Degree of filtration Glassfibre media Microglass III (for disposable elements) 2µ media 2Q 5µ media 5Q µ media Q 2µ media 2Q ox 4 Seal material Seal type ox 5 Indicator Pressure gauge, setting.2 bar, G /8 for dual head ports and TSR series Pressure switch 42V,.2 bar setting, NO with G /8 SP Pressure switch 42V,.2 bar setting, NC with G /8 SP Pressure switch 25V,.2 bar setting NO/NC with G /8 No indicator, indicator ports L + R plugged Other settings for indicators / gauges on request G2 S2 S3 S4 P2 on request ox ypass valve. bar Other bypass settings ypass valve F on request ox 7 Filter connection Ports G"(SP) (2 ports, one supplied as plugged connection) ßx(c)=2 5.% G ox 8 Degree of filtration Options Options No diffuser required Diffuser type P without perforated plate area Diffuser with integrated hose connection Magnets Diffuser type P and magnets Other combinations 4 on request E F on request Note: ETF filters are standard supplied without magnets and including diffuser type P Average filtration beta ratio ß (ISO 889) / particle size µm [c] ßx(c)= ßx(c)=75 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% 9% % Highlights Key (Denotes part number availability) Item is standard Item is standard with green options Item is semi standard Item is non standard 99.5% 2 Note: Standard items are in stock, semi standard items are available within four weeks 99.9% Media code 2Q 5Q Q 2Q Replacement elements 93799Q 93797Q Q Q 93797Q Q 93795Q 93795Q Q Q Q Q Q 93797Q Q Q Q Q 93795Q Q Q 93798Q 93798Q Q Spare elements Supercedes FC22.Q2.XS FC22.Q5.XS FC22.Q.XS FC22.Q2.XS FC23.Q2.XS FC23.Q5.XS FC23.Q.XS FC23.Q2.XS FC24.Q2.XS FC24.Q5.XS FC24.Q.XS FC24.Q2.XS FC25.Q2.XS FC25.Q5.XS FC25.Q.XS FC25.Q2.XS FC2.Q2.XS FC2.Q5.XS FC2.Q.XS FC2.Q2.XS FC275.Q2.XS FC275.Q5.XS FC275.Q.XS FC275.Q2.XS Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability. Parker Hannifin Filter Division Europe FDH2UK. Section

9 Tanktop Mounted Return Line Filters TTF Series MAX 5 I/min - bar AN INNOVATIVE GREEN FILTER FEATURING LEIF LEIF Low pressure filters

10 Tanktop Mounted Return Line Filters TTF Series Features & enefits Features bar rated filter Cast aluminium head LEIF elements Magnetic pre-filtration In-to-Out filtration High level of customisation Full flow bypass with low hysteresis Standard or customised funnel Advantages Can be utilised for severe return line applications Compact profile, lightweight and durable Patented element safeguards the use of genuine parts Removes ferro particles, even during bypass conditions All captured contamination retains inside the element Dedicated system-matched solutions can be easily made available Reduction of bypass period due to low hysteresis Only a small part of the total flow is bypassing the element Ensures that oil enters the tank under the oil level enefits Reduced downtime due to premature filter failures Less weight, smaller envelop and cleaner appearance Guaranteed quality of filtration Contributes to ISO 4 certification Improved fluid cleanliness levels Extended element life time No recontamination of system during change of elements Improved integration of filter in system combined with lower initial system costs Improved protection of system Significant reduction of oil foaming Typical Applications Waste management trucks Mobile cranes Power packs Wheeled loaders Drilling equipment The Parker Filtration TTF Series Return Line Filters TTF tank top mounted return line filters feature pre-filtration by means of a magnet column and a full flow bypass with low hysteresis. Thanks to the In-to-Out filter principle, contaminated oil cannot leak back into the system. TTF filters are available in versions capable of handling flow rates up to 5 l/min. They can operate up to a maximum working pressure of bar. Optional filling port in filter cover, second return port and customised diffusers can be specified. Manifold type filter head (TSR Series) with four return ports is also available. 2 Parker Hannifin Filter Division Europe FDH2UK. Section 2

11 Specification Operation pressure: Max. bar. Assembly: Tank top mounted. Connections: Threaded SP ports. Flanged ports on request. Manifold filter head type TSR on request available for flows up to 25 l/min. Filter housing: Aluminium head and cover. Seal material:, fluoroelastomer, neoprene. Operation temperature range: -4 to +2 C. ypass setting Opening pressure.8 /.5 or 2 bar. Other settings on request. Degree of filtration: Determined by multipass test according to ISO 889. Flow fatigue characteristics: Filter media is supported so that the optimum fatigue life is achieved. Filtration media: Microglass III and Ecoglass III for LEIF elements. Also available µm cellulose and 4µm stainless steel mesh. Element collapse rating: bar (ISO 294) Pressure indicator options: Setting.7 or.2 bar. Other settings on request. Visual pressure gauge. Electrical pressure switch. Options: Diffuser with and without (type P) perforated flow area for optimum flow path in the reservoir. Magnetic pack: Standard. Filling port in cover: (optional) Plugged. Filter element: LEIF element with reusable metal element sleeve. Optional conventional style element with steel end caps. The LEIF element is patented and safeguards the use of genuine parts. Note: LEIF element can be used with mineral and HEES type oils. For other fluids consult Parker Filtration. LEIF contributes to ISO 4 quality standards. TTF TSR Free element clearance Ø4 F 8 4x ISO228 G/8 (SP) A A a xØ 4 Ø5 pitch Ø2± Mounting hole 9b Type -25/2-7/2-23/ / 2-5 Type -/-9/-2 Min. oil level TTF sealkit: No Ref. No. Description 4 Flange nut 3 Cover 4 Cover-seal 5 Top-spring Insert 7 Insert-seal 8 Element 9a - Indicator 9b -3 Plug Mx -3 Unit-ring Housing 2 Gasket 3 Sleeve 4 Funnel/diffuser 5 O-ring ypass set 3 Ø5 L H G (SP) SAE Standard length TSR2 Type H F L TSR 2 TSR 2 TSR 25 Dimensions in mm Ports A G /4 (SP) SAE2 Note: All ports for return flow only Ports Low pressure filters Technical specification Max nominal return flow l/min Max working pressure bar Temperature range -3 C to + C ypass pressure,5 bar LEIF -filtration ratio 2µ/5µ/µ/2µ Seals NR Options Dipstick Indicator (electrical/visual)

12 Tanktop Mounted Return Line Filters TTF Series Specification (cont.) Torqueload filter-cover TTF- 4 Nm max. TTF-2 Nm max. Torqueload filter-tank TTF- 5 Nm max. TTF-2 4 Nm max. H2 Type -25/2-7/2-23/2-3 Type -/-9/-2 2-4/2-5 Section A-A with funnel ØD ØD d h H h Optional for TTF2 series /2 SAE-3PSI or G2 Optional plugged filling port: G/2 for TTF series G3/4 for TTF2 series Type R2 R A TTF TTF9 G /2, G 3 /4, G TTF2 TTF25 TTF7 TTF23 TTF3 G /4, G /2 TTF4 TTF5 Dimensions in mm K 9 R Top view b 5* A 93 3 Note: TTF2-4 and TTF2-5 are standard supplied without magnets d=sp h h D D H H2 b R R R2 K x x Torqueload filter-cover TTF- 4 Nm max. TTF-2 Nm max. Torqueload filter-tank TTF- 5 Nm max. TTF-2 4 Nm max. 9 b K ØD d h H h Optional for TTF2 series /2 SAE-3PSI or G2 Optional plugged filling port: G/2 for TTF series G3/4 for TTF2 series R2 A 5* R R without funnel Section A-A A Type TTF TTF9 TTF2 TTF25 TTF7 TTF23 TTF3 TTF4 TTF5 Dimensions in mm Top view d=sp b D h h H R R R2 K /2, 3 /4, /4, /2 8 9 Note: TTF2-4 and TTF2-5 are standard supplied without magnets x x 4 Parker Hannifin Filter Division Europe FDH2UK. Section 2

13 Pressure Drop Curves The recommended level of the initial pressure drop for low pressure filters is max.5 bar. If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows: p = ( p32 x viscosity of medium used) / 32cSt. TSR II-2 Filter Element Length TSR II-2 Filter Element Length Q Q 7.3 Q 4.4 2Q Q 5Q Q 2Q TSR II-25 Filter Element Length 3 TTF - Filter Element Length Q Q.2.5 Q. 2Q Q Q Q Q TTF -9 Filter Element Length 3 TTF -2 Filter Element Length Q Q Q Q Q TTF -25 Filter Element Length 5.5 5Q Q 7.3 2Q Q Q.4 Q.2 2Q Low pressure filters

14 Tanktop Mounted Return Line Filters TTF Series Pressure Drop Curves (cont.) The recommended level of the initial pressure drop for low pressure filters is max.5 bar. If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows: p = ( p32 x viscosity of medium used) / 32cSt. TTF 2-7 Filter Element Length TTF 2-23 Filter Element Length Q Q.5 Q 7.3 2Q TTF 2-3 Filter Element Length Q Q 5Q 2Q TTF 2-4 Filter Element Length Q Q Q Q TTF 2-5 Filter Element Length Q 5Q Q 2Q Q Q 2Q 4.5. Q Parker Hannifin Filter Division Europe FDH2UK. Section 2

15 TTF Filter Element Length 2 Cellulose & stainless steel media TTF9 Filter Element Length 3 Cellulose & stainless steel media C 4W C 4W TTF2 Filter Element Length 4 Cellulose & stainless steel media TTF25 Filter Element Length 5 Cellulose & stainless steel media C W C 4W TTF7 Filter Element Length Cellulose & stainless steel media TTF23 Filter Element Length 7 Cellulose & stainless steel media C 4W C 4W TTF3 Filter Element Length 8 Cellulose & stainless steel media C W Low pressure filters

16 Tanktop Mounted Return Line Filters TTF Series Indicator Options Indicator PS pressure switch Protective cap with dual cable duct for, 7-2, 3mm diameter cable Indicator PS NO/NC pressure switch Protective cover Normally open contacts Amp.3x8 terminals Switch 74 Normally closed contacts A/F = COM. 2 = N.C. 3 = N.O A/F 9 9 Mx G /8 (SP) Ø3.5 Mx Ø28 Elec.rating Thread connection Elec.connection Protection Specifications 42V / 4A Mx AMP.3x.8 terminals + protective cap IP5 (with cap) terminals IP FMUSEMML (Switch) Elec.rating Thread connection Elec.connection Protection Switch type Specifications 42V / 2A G /8 - Mx AMP terminal.3x.8 IP5 (terminal IP) NO or NC FMUS2EMG2L (NO switch) FMUS3EMG2L (NC switch) Visual indicator.2 bar M: code FMUGEPML G /8: code FMUG2EPG2L Ordering Information Standard products table Part number Supercedes TTF3QLP2EG2 TTF9-G 3 /4 TXWL3-5 MM TTF32QLP2EG2 TTF9-G 3 /4 TXWL3-2 5 MM TTF5QLP2EG TTF25-G TXWL3E- 5 MM TTF52QLP2EG TTF25-G TXWL3E-2 5 MM TTFQLP2EG23 TTF7-G /4 TXWL4- T 5 MM TTF2QLP2EG23 TTF7-G /4 TXWL4-2 T 5 MM TTF8QLP2EG243 TTF3-G /2 TXWL5A- T 5 MM TTF82QLP2EG243 TTF3-G /2 TXWL5A-2 T 5 MM TTFQLP2HG24A TTF5-G /2 TXWL5C- T 2 MM NMG TTFQLP2HG24A TTF5-G /2 TXWL5C-2 T 2 MM NMG Flow (l/min) Model number Element length TTF9 Length 3 TTF9 Length 3 TTF25 Length 5 TTF25 Length 5 TTF7 Length TTF7 Length TTF3 Length 8 TTF3 Length 8 TTF5 Length TTF5 Length Media rating (µ) Note: Filter assemblies ordered from the product configurator on the next page are on extended lead times. Where possible, please make your selection from the table above Seals Indicator Plugged Plugged Plugged Plugged Plugged Plugged Plugged Plugged Plugged Plugged ypass settings.5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi) 2. ar (29 Psi) 2. ar (29 Psi) Ports G 3 /4 G 3 /4 G G G /4 G /4 G /2 G /2 G /2 G /2 Included options None None None None Diffuser type T Diffuser type T Diffuser type T Diffuser type T Diffuser type T Diffuser type T Replacement elements Q Q Q Q Q Q Q Q Q 93787Q Supercedes TXWL3- TXWL3-2 TXWL3E- TXWL3E-2 TXWL4- TXWL4-2 TXWL5A- TXWL5A-2 TXWL5C- TXWL5C-2 8 Parker Hannifin Filter Division Europe FDH2UK. Section

17 Ordering Information (cont.) Product configurator Configurator example of a TTF Series filter ox TTF ox 2 9 ox 3 5QL ox 4 V ox 5 S3 ox H ox 7 L24 ox 8 Configurator example of a TSR Series filter ox TSR ox 2 3 ox 3 2QL ox 4 ox 5 G2 ox E ox 7 2G2 ox 8 3 ox TTF TSR ox 2 Housing TTF - TTF -9 TTF -2 TTF -25 TTF 2-7 TTF 2-23 TTF 2-3 TTF 2-4 TTF 2-5 TSR2-2 TSR2-2 TSR2-25 Filter type ox 3 Element media Disposable element LEIF element Cellulose Nom. rating C Degree of filtration Glass fibre Microglass III (for disposable elements) Ecoglass III (for Leif elements) 2µ media 5µ media 2Q 5Q 2QL 5QL µ media Q QL 2µ media 2Q 2QL Wire mesh Abs. rating 4W ox 4 Seal material Fluorelastomer Neoprene Seal type V N ox 5 Indicator Pressure gauge, setting.2 bar, Mx Pressure gauge, setting.2 bar, G /8 for dual head ports and TSR series Pressure switch 42V,.2 bar setting, NO/NC, Mx Pressure switch 42V,.2 bar setting, NO with G /8 SP Pressure switch 42V,.2 bar setting, NC with G /8 SP Pressure switch 25V, NO/NC with G /8 Pressure switch 22V, NO/NC with M No indicator, indicator ports not machined No indicator, indicator port R plugged No indicator, indicator ports L + R plugged Other settings for indicators / gauges on request Note: for all dual head ports and TSR series apply G /8 connection for indicator G G2 S S2 S3 S4 S5 N P P2 on request ox ypass valve.8 bar.5 bar 2. bar for TTF series locked bypass Other bypass settings ypass valve E H X on request ox 7 Filter connection Ports G 3 /4" (SP) (-/-9/-2) G" (SP) (-/-9/-2) G /4" (SP) (2-7/2-23/2-3/2-4/2-5) G /2"(SP) (2-7/2-23/2-3/2-4/2-5) /2" SAE-3 PSI (2nd port) + G /2" G2" (2nd port) + G /2" G /4" (SP) + 2 Ports G" (TSR only) 2xG /2" (SP) + 2 Ports G" (TSR only) SAE2 + 2 Ports A SAE (TSR only) 2xSAE2 + 2 Ports SAE (TSR only) G2 G G2 G24 L24 G32 G2 2G2 S2 2S2 ox 8 Options Options No diffuser required Diffuser type T with perforated plate area Diffuser type P without perforated plate area Diffuser with integrated hose connection No magnets Dipstick Plugged filling port Diffuser type T and no magnets Diffuser type P and no magnets Diffuser type T, no magnets, plugged filling port Diffuser type P, no magnets, plugged filling port Other combinations 3 4 on request 5 8 A C D on request Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability. ßx(c)=2 5.% Degree of filtration Average filtration beta ratio ß (ISO 889) / particle size µm [c] ßx(c)= ßx(c)=75 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% 9% % % % Media code 2Q/2QL 5Q/5QL Q/QL 2Q/2QL Highlights Key (Denotes part number availability) Item is standard Item is standard with green options Item is semi standard Item is non standard Note: Standard items are in stock, semi standard items are available within four weeks Low Pressure Filters

18 Tanktop Mounted Return Line Filters TTF Series Ordering Information (cont.) TTF - TTF -9 TTF -2 TTF -25 TTF -7 TTF -23 TTF -3 TTF -4 TTF -5 TSR2 TSR2 TSR25 Supercedes spare element table TXWL Q TXWL Q TXWL3D Q TXWL3E Q TXWL Q TXWL Q TXWL5A Q TXWL Q TXWL5C Q PXWL Q PXWL Q PXWL4A Q TXWL Q TXWL Q TXWL3D Q TXWL3E Q TXWL Q TXWL Q TXWL5A Q TXWL Q TXWL5C Q PXWL Q PXWL Q PXWL4A Q TXWL Q TXWL Q TXWL3D Q TXWL3D Q TXWL Q TXWL Q TXWL5A Q TXWL Q TXWL5C Q PXWL Q PXWL Q PXWL4A Q TXWL Q TXWL Q TXWL3D Q TXWL3E Q TXWL Q TXWL Q TXWL5A Q TXWL Q TWXL5C Q PXWL Q PXWL Q PXWL4A Q TTF - TTF -9 TTF -2 TTF -25 TTF -7 TTF -23 TTF -3 Supercedes spare element table TXX TXX TXX3D TXX3E TXX TXX TXX5A TXW Q TXW Q TXW3D Q TXW3E Q TXW Q TXW Q TXW5A Q TXW Q TXW Q TXW3D Q TXW3E Q TXW Q TXW Q TXW5A Q TXW Q TXW Q TXW3D Q TXW3E Q TXW Q TXW Q TXW5A Q TXW Q TXW Q TXW3D Q TXW3E Q TXW Q TXW Q TXW5A Q ST ST ST3D ST3E ST ST ST5A Parker Hannifin Filter Division Europe FDH2UK. Section 2

19 Tanktop Mounted Return Line Filters GT Series MAX 24 I/min - bar AN INNOVATIVE GREEN FILTER FEATURING LEIF LEIF 2 Low pressure filters

20 Tanktop Mounted Return Line Filters GT Series Features & enefits Features bar rated filter Cast aluminium head LEIF elements Magnetic pre-filtration In-to-Out filtration High level of customisation Full flow bypass with low hysteresis Standard or customised funnel Advantages Can be utilised for severe return line applications Compact profile, lightweight and durable Patented element safeguards the use of genuine parts Removes ferro particles, even during bypass conditions All captured contamination retains inside the element Dedicated system-matched solutions can be easily made available Reduction of bypass period due to low hysteresis Only a small part of the total flow is bypassing the element Ensures that oil enters the tank under the oil level enefits Reduced downtime due to premature filter failures Less weight, smaller envelop and cleaner appearance Guaranteed quality of filtration Contributes to ISO 4 certification Improved fluid cleanliness levels Extended element life time No recontamination of system during change of elements Improved integration of filter in system combined with lower initial system costs Improved protection of system Significant reduction of oil foaming Typical Applications Mobile cranes Excavators Deck cranes Fire fighting equipment Hydraulic presses Waste balers Industrial power units Fork lift trucks The Parker Filtration GT Series Tank Mounted Return Line Filters. GT tanktop mounted return line filters feature pre-filtration by means of a magnet column and a full flow bypass with low hysteresis. Thanks to the In-to-Out filter principle, contaminated oil cannot leak back into the system. GT Filters are available in versions capable of handling flow rates up to 24 l/min. They can operate with a maximum working pressure of bar. LEIF elements are available for environment-friendly filtration for versions up to 5 l/min. 22 Parker Hannifin Filter Division Europe FDH2UK. Section 3

21 Specification Operating pressure: Max. bar. Assembly: Tank top mounted. Connections: Flanges SAE2, 3. Threaded ports and multiple ports available. Filter housing: Aluminium head and cover. Seal material:, fluoroelastomer, neoprene. Operating temperature range: -4 to +2 C. ypass setting Opening pressure.8 /.5 or 2 bar. Other settings on request. Degree of filtration: Determined by multipass test according to ISO 889. Flow fatigue characteristics: Filter media is supported so that the optimum fatigue life is achieved. Filtration media: Microglass III and Ecoglass III for LEIF elements. Also available µm Cellulose and 4µm stainless steel mesh. Element collapse rating: bar (ISO 294). Pressure indicator options: Setting.7 or.2 bar. Other settings on request. Visual pressure gauge. Electrical pressure switch. Options: Diffuser with and without (type P) perforated flow area for optimum flow path in the reservoir. Magnetic pack: Standard. Filling port in cover (optional): Plugged G /2. Filter element: LEIF element with reusable metal element sleeve. Conventional style element with steel end caps. The LEIF element is patented and safeguards the use of genuine parts. Note: LEIF element can be used with mineral and HEES type oils. For other fluids consult Parker Filtration. LEIF contributes to ISO 4 quality standards. GT-3 (LEIF version) Ref. No. Description Nut 2 Washer 3 Cover 4 Cover-seal 5 Top-spring Housing 7 Insert-seal 8 Plug Mx 9 onded seal Insert LEIF element 2 Element sleeve 3 Gasket 4 O-ring 5 ypass set Diffuser GT-4 (conventional element) Ref. No. Description Nut 2 Washer 3 Cover 4 Cover-seal 5 Top-spring Housing 7 Insert-seal 8 Plug Mx 9 onded seal Insert Element seal 2 Element 3 O-ring 4 O-ring 5 ypass set Diffuser GT-3 (LEIF version) GT-4 (conventional element) Low pressure filters

22 Tanktop Mounted Return Line Filters GT Series Specification (cont.) GT-3 with diffuser 5 (*) Plug Mx ISO 228-G /8(SP)* A M2 *Optional Filter - tank /4 -SAE-3PSI torque-load 45 Nm F ØG A ØD E C L A 2 -SAE-3PSI N (Pd) (*) Cover - house torque-load 3 Nm ØU K A M (*) Flange SAE 2 View A-A ØQ *Optional /4 -SAE-3PSI H S P ØR W Note: Dimension indicated * are applicable for filterhead with multiple ports. Note: *on request. View - with diffuser GT-3 without diffuser ØV Type GT27* GT39 GT5 Dimensions in mm C D E F G H L K M N(Pd) P Q R S U V W Kg R (*) Plug Mx ISO 228-G /8(SP)* A M2 *Optional Filter - tank /4 -SAE-3PSI torque-load 45 Nm F ØG A ØD E C L A 2 -SAE-3PSI N (Pd) (*) Cover - house torque-load 3 Nm ØA K A M (*) Flange SAE 2 View A-A ØQ *Optional /4 -SAE-3PSI P H S ØR View - without diffuser Note: Dimension indicated * are applicable for filterhead with multiple ports. Note: *on request. Type GT27* GT39 GT5 Dimensions in mm A C D E F G H L K M N(Pd) P Q R S V W Kg R Parker Hannifin Filter Division Europe FDH2UK. Section 3

23 GT-4 with diffuser Plug Mx ØF A ØD M Cover - house torque-load 3 Nm Filter - tank torque-load 45 Nm E A C N (Pd) ØU H W ØV View - with diffuser Type GT GT8 GT GT5 GT2 C ØD E ØF H K L M N(Pd) P ØQØR S ØU ØV W Kg Note: dimensions of GT-24 identical to GT-2. Dimensions in mm R GT-4 without diffuser Plug Mx A ØF E A ØA H ØD M ØQ A A S P ØR Cover - house torque-load 3 Nm Filter - tank torque-load 45 Nm C M A A S P L K Flange SAE 3 View A-A M N (Pd) L K Flange SAE 3 View A-A ØQ ØR View - without diffuser Type GT GT8 GT GT5 GT2 25 ØA C ØD E ØF H K L M N(Pd) P ØQØR S Kg R Note: dimensions of GT-24 identical to GT-2. Dimensions in mm Low pressure filters

24 Tanktop Mounted Return Line Filters GT Series Specification (cont.) GT F /4 manifold type - with diffuser Ø32 M4 A Ø3 8.2 R Cover - house torque-load 3 Nm 5 Filter - tank torque-load 45 Nm ±2 5 A M8 /2 -SAE-PSI View A-A R47.5 Tankhole +.5 Ø24.5 Indicator H 9 5 /4 -SAE-PSI (3x) Ø4 Ø2 Type GTL GT8L GTL GT5L GT2L Dimensions in mm H Ø24 with diffuser Note: dimensions of GT-24 identical to GT-2 GT F /4 manifold type - without diffuser Ø32 M4 A Ø3 8.2 R Cover - house torque-load 3 Nm 5 Filter - tank torque-load 45 Nm ±2 5 A M8 /2 -SAE-PSI View A-A R47.5 Tankhole +.5 Ø24.5 Indicator H 5 without diffuser /4 -SAE-PSI (3x) Note: dimensions of GT-24 identical to GT Ø4 Ø2 Type GTL GT8L GTL GT5L GT2L Dimensions in mm H Parker Hannifin Filter Division Europe FDH2UK. Section 3

25 9 Indicator Options Indicator PS pressure switch Protective cap with dual cable duct for, 7-2, 3mm diameter cable Indicator PS NO/NC pressure switch Protective cover Normally open contacts 75 Amp.3x8 terminals 2 4 Switch 74 Normally closed contacts A/F = COM. 2 = N.C. 3 = N.O A/F 9 Mx G /8 (SP) Ø3.5 Mx Ø28 Elec.rating Thread connection Elec.connection Protection Visual indicator M code G /8 code Specifications 42V / 4A Mx AMP.3x.8 terminals + protective cap IP5 (with cap) terminals IP FMUSEMML (Switch).2 bar FMUSEMML FMUS4EMG2L Elec.rating Thread connection Elec.connection Protection Switch type Specifications 42V / 2A G /8 - Mx AMP terminal.3x.8 IP5 (terminal IP) NO or NC FMUS2EMG2L (NO switch) FMUS3EMG2L (NC switch) Visual indicator M code G /8 code.2 bar FMUGEPML FMUG2EPG2L Pressure Drop Curves The recommended level of the initial pressure drop for low pressure filters is max.5 bar. If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows: p = ( p32 x viscosity of medium used) / 32cSt. Filter housing and element pressure drop based on 32cSt fluid viscosity and.87 density. Empty Housing GT-3 Series (2 SAE Flange) GT39 Filter Element Length delta-p Q Q Q 2Q GT5 Filter Element Length Q Q.4 Q.2 2Q Low pressure filters

26 Tanktop Mounted Return Line Filters GT Series Pressure Drop Curves (cont.) Empty Housing GT-4 Series (3 SAE Flange) GT Filter Element Length delta-p Q.8. 5Q.4 Q Q GT8 Filter Element Length 4 GT Filter Element Length Q Q Q 2Q Q.8. 5Q Q 2Q GT5 Filter Element Length GT2 Filter Element Length Q Q Q.4 Q..2 2Q Q Q.2 2Q GT24 Filter Element Length Q Q.4 Q.2 2Q Parker Hannifin Filter Division Europe FDH2UK. Section 3

27 Pressure Drop Curves (cellulose and stainless steel media) GT39 Filter Element Length GT5 Filter Element Length C 4W C 4W GT Filter Element Length 3 GT8 Filter Element Length C 4W C 4W GT Filter Element Length 5 GT5 Filter Element Length C 4W C 4W GT2 Filter Element Length C.4 4W Cellulose and stainless steel media Example: GT2 Filter Element Length 7 - cellulose and stainless steel media 29 Low pressure filters

28 Tanktop Mounted Return Line Filters GT Series Ordering Information Standard products table Part number GT2QLPER323 GT22QLPER323 GT5QLPER483 GT52QLPER483 GT7QPER483 GT72QPER483 Supercedes GTS5-S2 TXWL8C- T 5 M GTS5-S2 TXWL8C-2 T 5 M GTS-S3 TXWL2- T 5 M GTS-S3 TXWL2-2 T 5 M GTS2-S3 TXW4- T 5 M GTS2-S3 TXW4-2 T 5 M Flow (l/min) Model number GT5 GT5 GT GT GT2 GT2 Element length Length 2 Length 2 Length 5 Length 5 Length 7 Length 7 Media rating (µ) Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above Seals Indicator Plugged Plugged Plugged Plugged Plugged Plugged ypass settings.5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi) Ports 2"SAE-3 PSI 2"SAE-3 PSI 2"SAE-3 PSI 2"SAE-3 PSI 2"SAE-3 PSI 2"SAE-3 PSI Included options Diffuser type T Diffuser type T Diffuser type T Diffuser type T Diffuser type T Diffuser type T Replacement elements Q 93788Q 93782Q 93785Q Q 93785Q Supercedes TXWL8L- TXWL8L-2 TXWL2- TXWL2-2 TXW4- TXW4-2 Product configurator Configurator examples filter including LEIF element ox GT ox 2 5 ox 3 5QL ox 4 ox 5 S ox E ox 7 R48 ox 8 C Configurator examples filter including conventional element ox GT ox 2 8 ox 3 2Q ox 4 ox 5 S4 ox E ox 7 3R2 ox 8 4 ox GT ox 2 Housing 3-39 l/min 3-5 l/min 4- l/min 4-8 l/min 4- l/min 4-5 l/min 4-2 l/min 4-24 l/min Filter type ox 3 Element media Disposable element LEIF element Cellulose Nom. rating C Degree of filtration Glass fibre Microglass III (for disposable elements) Ecoglass III (for Leif elements) 2µ media 5µ media 2Q 5Q 2QL 5QL µ media Q QL 2µ media 2Q 2QL Wire mesh Abs. rating 4W ox 4 Seal material Fluorelastomer Neoprene Seal type V N ox 5 Indicator Pressure gauge, setting.2 bar, Mx Pressure gauge, setting.2 bar, G /8 for dual port head and TSR series Pressure switch 24V,.2 bar setting, NO/NC, Mx Pressure switch 24V,.2 bar setting, NO with G /8 SP Pressure switch 24V,.2 bar setting, NC with G /8 SP Pressure switch 25V, NO/NC with G /8 Pressure switch 22V, NO/NC with M No indicator, indicator ports not machined No indicator, indicator port R plugged No indicator, indicator ports L + R plugged Other settings for indicators / gauges on request Note: For all dual head ports for GTS apply G /8 connection for indicators G G2 S S2 S3 S4 S5 N P P2 on request ox ypass valve ypass valve.8 bar.5 bar 2. bar for GT-3 series locked bypass Other bypass settings E H X on request ox 7 Filter connection Ports 2" SAE GT-3 3" SAE GT-4 x2" SAE flanged + 2x /4" SAE flanged for GT-3 3x /4" SAE flanges + x /2" SAE for GT-4 Highlights Key (Denotes part number availability) Item is standard Item is standard with green options Item is semi standard Item is non standard R32 R48 R32M 3R2 Note: Standard items are in stock, semi standard items are available within four weeks ox 8 Options Options No diffuser required Diffuser type T with perforated plate area Diffuser type P without perforated plate area Diffuser with integrated hose connection No magnets Dipstick Plugged filling port Diffuser type T and no magnets Diffuser type P and no magnets Diffuser type T, no magnets, plugged filling port Diffuser type P, no magnets, plugged filling port Other combinations 3 4 on request 5 8 A C D on request Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability. 3 Parker Hannifin (UK) Limited Filter Division Europe FDH2UK. Section 3

29 Ordering Information (cont.) ßx(c)=2 5.% Average filtration beta ratio ß (ISO 889) / particle size µm [c] ßx(c)= ßx(c)=75 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% Degree of filtration 9% % % % Media code 2Q/2QL 5Q/5QL Q/QL 2Q/2QL GT39 GT5 GT GT8 GT GT5 Supercedes spare element table TXWL8A Q TXWL8C Q TXWL Q TXWL Q TXWL Q TXWL Q TXWL8A Q TXWL8C Q TXWL Q TXWL Q TXWL Q TXWL Q TXWL8A Q TXWL8C Q TXWL- 9378Q TXWL- 9378Q TXWL Q TXWL Q TXWL8A Q TXWL8C Q TXWL Q TXWL Q TXWL Q TXWL Q GT39 GT5 GT GT8 GT GT5 GT2 GT24 Supercedes spare element table TXX8A TXX8C TXX TXX TXX TXX TXX TXWL8A Q TXWL8C Q TXWL Q TXWL Q TXWL Q TXWL Q TXW Q TXWH Q TXWL8A Q TXWL8C Q TXWL Q TXWL Q TXWL Q TXWL Q TXW Q TXWH Q TXWL8A Q TXWL8C Q TXWL Q TXWL Q TXWL Q TXWL Q TXW Q TXWH Q TXWL8A Q TXWL8C Q TXWL Q TXWL Q TXWL Q TXWL Q TXW Q TXWH Q ST8A ST8C ST ST ST ST ST Low Pressure Filters

30

31 In-Tank Mounted Return Line Filters IN-AG Series MAX 24 I/min AN INNOVATIVE GREEN FILTER FEATURING LEIF LEIF 33 Low pressure filters

32 In-Tank Mounted Return Line Filters IN-AG Series Features & enefits Features Filter integrated in tank LEIF elements Magnetic pre-filtration In-to-Out filtration High level of customisation Full flow bypass with low hysteresis Standard or customised funnel Advantages Compact low cost solution Filter protected by reservoir Patented element safeguards the use of genuine parts Removes ferro particles, even during bypass conditions All captured contamination retains inside the element Dedicated system-matched solutions can be easily made available Reduction of bypass period due to low hysteresis Only a small part of the total flow is bypassing the element Ensures that oil enters the tank under the oil level enefits Suitable for extreme heavy duty applications or hazardous environments No tank top parts contributes to improved esthetical design Guaranteed quality of filtration Contributes to ISO 4 certification Improved fluid cleanliness levels Extended element life time No recontamination of system during change of elements Improved integration of filter in system combined with lower initial system costs Improved protection of system Significant reduction of oil foaming Typical Applications Agricultural machines Articulated dump trucks Forestry equipment Wheeled loaders Lubrication systems Excavators The Parker Filtration IN-AG In-Tank Mounted Return Line Filters. The low-cost, high-performance return line IN-AG filter features Q3 filter media, a bypass construction with low hysteresis, magnetic pre-filtration and a high dirt-holding capacity. The range is capable of handling flow rates from 3 l/min up to 24 l/min. LEIF elements are available for flow rates up to 5 l/min, meeting the most stringent demands for environmentally-friendly filtration and offering protection against poor quality pirate elements. 34 Parker Hannifin Filter Division Europe FDH2UK. Section 4

33 Specification Assembly: Inside tank. Seal material:, fluoroelastomer, neoprene. Operating temperature range: -4 to +2 C. ypass setting:.8/.5 and 2. bar. Other settings on request. Degree of filtration: Determined by multipass test according to ISO 889. Flow fatigue characteristics: Filter media is supported so that the optimal fatigue life is achieved. Filtration media: Microglass III, Ecoglass III for LEIF elements Also available µm Cellulose and 4µm stainless steel mesh. Element collapse rating: bar (ISO 294). Options: Diffuser with and without (type P) perforated flow area for optimum flow path in the reservoir. Magnetic pack: Standard. Note: IN-AG 2-4 and 2-5 are standard supplied without magnets. Filter element: LEIF element with reusable metal element sleeve. Optional conventional style element with steel end caps. The LEIF element is patented and safeguards the use of genuine parts. Note: LEIF element can be used with mineral and HEES type oils. For other fluids consult Parker Filtration. LEIF contributes to ISO 4 quality standards. Insert-AG LEIF 3 series Ref. No. Description Top-spring 2 Insert 3 Insert-seal 4 LEIF Element 5 Sleeve Gasket 7 O-ring 8 ypass set 9 Diffuser Series 4 Series Insert-AG LEIF 4 series Ref. No. Description Top-spring 2 Insert 3 Insert-seal 4 Inner sleeve 5 LEIF -element Outer sleeve 7 O-ring 8 O-ring 9 ypass set Diffuser Low pressure filters

34 In-Tank Mounted Return Line Filters IN-AG Series Specification (cont.) A d p C D y 45 E h x Mounting arrangement H Type A H h d x y s p C D E F G IN3 IN IN9 IN2 IN F without diffuser IN7 IN23 IN3 IN4 IN Ø23 Ø2 Ø2 Ø23±.2 Ø227±.2 IN27 IN39 IN G s.8 Series 2 Series Series Dimensions in mm Ø27± H IN-AG 3 IN-AG 4 Ø93 Ø2 5 u v R±. without diffuser Ø23 K ØM ØQ+.-.5 Type ØM ØQ -.5 K L M U V Q R 3.2 min.2 Type IN IN8 IN IN5 IN2 IN24 Dimensions in mm H L with diffuser 3 Series 4 Series IN27 IN39 IN5 (3) IN IN8 IN IN5 IN2 IN Dimensions in mm 3 Parker Hannifin Filter Division Europe FDH2UK. Section 4

35 Pressure Drop Curves The recommended level of the initial pressure drop for low pressure filters is max.5 bar. If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows: p = ( p32 x viscosity of medium used) / 32cSt. Filter housing and element pressure drop based on 32cSt fluid viscosity and.87 density. IN3 Filter Element Length IN Filter Element Length Q 5Q Q 2Q Q 5Q Q 2Q IN9 Filter Element Length 3 IN2 Filter Element Length Q Q Q Q 2Q Q.5 Q 7.3 2Q IN25 Filter Element Length 5 IN7 Filter Element Length Q 5Q Q 2Q Q 4.5 5Q.5 Q 7.3 2Q IN23 Filter Element Length 7 IN3 Filter Element Length Q Q..4.2 Q 2Q Q Q Q 2Q Low pressure filters

36 In-Tank Mounted Return Line Filters IN-AG Series Pressure Drop Curves (cont.) IN4 Filter Element Length 9 IN5 (2) Filter Element Length 2Q.8. 5Q. Q.4 2Q Q 5Q Q 2Q Q 5Q Q 2Q IN39 Filter Element Length IN5 (3) Filter Element Length Q. 5Q.4 Q.2 2Q IN Filter Element Length 3 IN8 Filter Element Length Q Q.4 Q.2 2Q IN Filter Element Length Q.8. 5Q Q 2Q IN2 Filter Element Length Q Q Q.2 2Q Q Q Q 2Q IN5 Filter Element Length Q Q Q.2 2Q IN24 Filter Element Length Q Q.4 Q.2 2Q Parker Hannifin Filter Division Europe FDH2UK. Section 4

37 Pressure Drop Curves (cellulose and stainless steel media) IN3 Filter Element Length IN3 Filter Element Length C.5.4 4W C W IN9 Filter Element Length 3 IN2 Filter Element Length C W C.87 4W IN25 Filter Element Length 5 IN7 Filter Element Length C 4W C 4W IN23 Filter Element Length 7 IN3 Filter Element Length C W C 4W Cellulose and stainless steel media Example: IN3 Filter Element Length 8 - Cellulose and stainless steel media 39 Low pressure filters

38 In-Tank Mounted Return Line Filters IN-AG Series Pressure Drop Curves (cellulose and stainless steel media) IN39 Filter Element Length IN5 (3) Filter Element Length C 4W C 4W IN Filter Element Length 3 IN8 Filter Element Length C 4W C 4W IN Filter Element Length 5 IN5 Filter Element Length C 4W C 4W IN2 Filter Element Length C.4 4W Cellulose and stainless steel media Example: IN3 Filter Element Length 8 - Cellulose and stainless steel media 4 Parker Hannifin Filter Division Europe FDH2UK. Section 4

39 Ordering Information Standard products table Part number IN3QLNEXXX IN32QLNEXXX IN5QLNEXXX IN52QLNEXXX INQLNEXXX IN2QLNEXXX IN8QLNEXXX3 IN82QLNEXXX3 IN2QLNEXXX3 IN22QLNEXXX3 IN5QLNEXXX3 IN52QLNEXXX3 IN7QNEXXX3 IN72QNEXXX3 Supercedes IN9-TXWL3-5 IN9-TXWL3-2 5 IN25-TXWL3E- 5 IN25-TXWL3E-2 5 IN7-TXWL4-5 IN7-TXWL4-2 5 IN3-TXWL5A- T 5 IN3-TXWL5A-2 T 5 IN5-TXWL8C- T 5 IN5-TXWL8C-2 T 5 IN-TXWL2- T 5 IN-TXWL2-2 T 5 IN2-TXW4-- T 5 IN2-TXW4-2- T 5 Flow (l/min) Model number IN9 IN9 IN25 IN25 IN7 IN7 IN3 IN3 IN5 IN5 IN IN IN2 IN2 Element length Length 3 Length 3 Length 5 Length 5 Length Length Length 8 Length 8 Length 2 Length 2 Length 5 Length 5 Length 7 Length 7 Media rating (µ) Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above Seals Indicator NA NA NA NA NA NA NA NA NA NA NA NA NA NA ypass settings.5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi) Ports NA NA NA NA NA NA NA NA NA NA NA NA NA NA Included options None None None None None None Diffuser type T Diffuser type T Diffuser type T Diffuser type T Diffuser type T Diffuser type T Diffuser type T Diffuser type T Replacement elements Q Q Q Q Q Q Q Q Q 93788Q 93782Q 93785Q Q 93785Q Supercedes TXWL3- TXWL3-2 TXWL3E- TXWL3E-2 TXWL4- TXWL4-2 TXWL5A- TXWL5A-2 TXWL8C- TXWL8C-2 TXWL2- TXWL2-2 TXW4- TXW4-2 Product configurator Configurator example filter including LEIF element ox IN ox 2 ox 3 5QL ox 4 V ox 5 N ox H ox 7 ox 8 Configurator example filter including conventional element ox IN ox 2 8 ox 3 2Q ox 4 ox 5 N ox H ox 7 ox 8 3 ox IN ox 2 Housing -3 l/min - l/min -9 l/min -2 l/min -25 l/min 2-7 l/min 2-23 l/min 2-3 l/min 2-4 l/min 2-5 l/min 3-39 l/min 3-5 l/min 4- l/min 4-8 l/min 4- l/min 4-5 l/min 4-2 l/min 4-24 l/min Filter type ox 3 Element media Disposable element LEIF element ox 4 Seal material Fluoroelastomer Neoprene Seal type Cellulose Nom. rating C V N Degree of filtration Glass fibre Microglass III (for disposable elements) Ecoglass III (for Leif elements) 2µ media 5µ media 2Q 5Q 2QL 5QL ox 5 No indicator Indicator µ media Q QL N 2µ media 2Q 2QL Wire mesh Abs. rating 4W ox ypass valve ypass valve.8 bar.5 bar 2. bar for IN-AG, 2 or 3 series locked bypass Other bypass settings E H X on request ox 7 Ports No ports applicable Highlights Key (Denotes part number availability) Item is standard Item is standard with green options Item is semi standard Item is non standard Filter connection Note: Standard items are in stock, semi standard items are available within four weeks XXX ox 8 Options Options No diffuser required Diffuser type T with perforated plate area Diffuser type P without perforated plate area No magnets Diffuser type T and no magnets Diffuser type P and no magnets A Note: IN-AG size 2-4 and 2-5 are standard supplied without magnets Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability. 4 Low pressure filters

40 In-Tank Mounted Return Line Filters IN-AG Series Ordering Information (cont.) ßx(c)=2 5.% Average filtration beta ratio ß (ISO 889) / particle size µm [c] ßx(c)= ßx(c)=75 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% Degree of filtration 9% % % % Media code 2Q/2QL 5Q/5QL Q/QL 2Q/2QL IN3 IN IN9 IN2 IN25 IN7 IN23 IN3 IN4 IN5 IN39 IN5 IN IN8 IN IN5 Supercedes spare element table TXWL Q TXWL Q TXWL Q TXWL3D Q TXWL3E Q TXWL Q TXWL Q TXWL5A Q TXWL Q TXWL5C Q TXWL8A Q TXWL8C Q TXWL Q TXWL Q TXWL Q TXWL Q TXWL Q TXWL Q TXWL Q TXWL3D Q TXWL3E Q TXWL Q TXWL Q TXWL5A Q TXWL Q TXWL5C Q TXWL8A Q TXWL8C Q TXWL Q TXWL Q TXWL Q TXWL Q TXWL Q TXWL Q TXWL Q TXWL3D Q TXWL3E Q TXWL Q TXWL Q TXWL5A Q TXWL Q TWXL5C Q TXWL8A Q TXWL8C Q TXWL- 9378Q TXWL- 9378Q TXWL Q TXWL Q TXWL Q TXWL Q TXWL Q TXWL3D Q TXWL3E Q TXWL Q TXWL Q TXWL5A Q TXWL Q TWXL5C Q TXWL8A Q TXWL8C Q TXWL Q TXWL Q TXWL Q TXWL Q 42 Parker Hannifin (UK) Limited Filter Division Europe FDH2UK. Section 4

41 Ordering Information (cont.) IN3 IN IN9 IN2 IN25 IN7 IN23 IN3 IN39 IN5 (3 series) IN IN8 IN IN5 IN2 IN24 Supercedes spare element table TXX TXX TXX TXX3D TXX3E TXX TXX TXX5A TXX8A TXX8C TXX TXX TXX TXX TXX TXW Q TXW Q TXW Q TXW3D Q TXW3E Q TXW Q TXW Q TXW5A Q TXW8A Q TXW8C Q TXW Q TXW Q TXW Q TXW Q TXW Q TXWH Q TXW Q TXW Q TXW Q TXW3D Q TXW3E Q TXW Q TXW Q TXW5A Q TXW8A Q TXW8C Q TXW Q TXW Q TXW Q TXW Q TXW Q TXWH Q TXW Q TXW Q TXW Q TXW3D Q TXW3E Q TXW Q TXW Q TXW5A Q TXW8A Q TXW8C Q TXW Q TXW Q TXW Q TXW Q TXW Q TXWH Q TXW Q TXW Q TXW Q TXW3D Q TXW3E Q TXW Q TXW Q TXW5A Q TXW8A Q TXW8C Q TXW Q TXW Q TXW Q TXW Q TXW Q TXWH Q ST ST ST ST3D ST3E ST ST ST5A ST8A ST8C ST ST ST ST ST Low Pressure Filters

42

43 Tanktop Mounted Return Line Filters with Integrated Air reather Tanktopper Series I,II & III MAX 5 I/min - bar AN INNOVATIVE GREEN FILTER FEATURING LEIF LEIF 45 Low Pressure Filters

44 Tanktop Mounted Return Line Filters Tanktopper Series I,II & III Features & enefits Features Return line filter with Integrated airbreather Airbreather equipped with high quality labyrinth Second port and dipstick available Airbreather element always supplied with spare return line filter elements LEIF elements Magnetic pre-filtration In-to-Out filtration Full flow bypass with low hysteresis Standard or customised funnel Advantages All in one filter No oil leakage through the airbreather Filler port and level glass function can be integrated in filter oth filter elements can be replaced during the service event Patented element safeguards the use of genuine parts Removes ferro particles, even during bypass conditions All captured contamination retains inside the element Reduction of bypass period due to low hysteresis Only a small part of the total flow is bypassing the element Ensures that oil enters the tank under the oil level enefits More compact design, cost reduction due to elimination of loose airbreather Improved efficiency of airbreather No oil leakage on the tank / in the environment Significant reduction of reservoir accessories Improved protection of system due to change of airbreather element Guaranteed quality of filtration Contributes to ISO 4 certification Improved fluid cleanliness levels Extended element life time No recontamination of system during change of elements Improved protection of system Significant reduction of oil foaming Typical Applications TPR I Fork lift trucks Power packs Mini excavator TPR II Gully-sucker Power packs Dredging ships TPR III Mobile cranes Refuse vehicles The Parker Filtration Tanktopper Series I, II & III Tanktop Mounted Return Line Filters. The TPR Series I, II & III offer a total filtration solution. A -micron Abs. air breather that is integrated into the filter housing, a magnet column for pre-filtration, In-to-Out filtration, a full-flow bypass with low hysteresis, and the high performance Q3 filter element materials are all proven success factors in efficient return-line filtration for flow rates up to 5 l/min. Several pressure gauges and switches can be applied, combined or not with a dipstick. The all-in-one, easy-to-mount cost-saving TPR solution allows for a more compact tank design. 4 Parker Hannifin Filter Division Europe FDH2UK. Section 5

45 Specification Operation pressure: Max. bar. Assembly: Tank top mounted. Connections: Threaded SP or SAE ports. Second return port available for Tanktopper II and Tanktopper III. Filter housing: Aluminium head and co-polymer cover. Seal material:, Fluoroelastomer. Operation temperature range: -4 to +8 C. ypass setting: Opening pressure.8,.5 or 2.5 bar for Tanktopper I. Opening pressure.5 bar for Tanktopper II and III. Degree of filtration: Determined by multipass test according to ISO 889. Flow fatigue characteristics: Filter media is supported so that the optimum fatigue life is achieved. Filtration media: Microglass III, Ecoglass III for LEIF element. Also available µm Cellulose and 4µm stainless steel mesh. (TPR) Element collapse rating: bar (ISO 294). Pressure indicator options: Setting.7 or.2 bar. Other settings on request. Visual pressure gauge. Electrical pressure switch. Options: Dipstick, second return port. Magnetic pack: Optional for Tanktopper I. Standard for Tanktopper II and III. Filter element: LEIF element with reusable metal element sleeve. Conventional style element with steel end caps only optional for Tanktopper I. The LEIF element is patented and safeguards the use of genuine parts. Note: LEIF element can be used with mineral and HEES type oils. For other fluids consult Parker Filtration. LEIF contributes to ISO 4 quality standards Tanktopper I F Free element clearance 27 (.) 2 3 H 77 (3.3) D 33 (.3) 5 (.59) 74±.5 (±.2) Mounting hole 5 (.59) Ø7 (2.87) M8 Ø (2.4) R Min.8mm (3.5) Max oil-level Min.8mm (3.5) -max () (2.4) NOM.Ø25 (.98) Indicator * For filter with air breather: In order to keep the minimum required distance under all circumstances, it is recommended to position the filter in the middle of the reservoir (2.) G /8 ISO 228(SP) G /8 ISO 228(SP) R (2.4) Ø9 (.35) Max. torque-load filter-tank 8 Nm 47 Pitch 9 Length H F D 9 G 3 /4 TPR-4 (.5) (.3) (SP) 29 2 TPR-8 (.) (.23) SAE 2 Dimensions in mm 9 Tanktopper I Ref. No. Description Cover 2 Magnet-set 3 Cover-seal 4 ridge (blue) 5 LEIF Element Sleeve 7 Funnel-assembly 8 Filter-housing 9 Housing-seal Airguide Cover airbreather 2 reather-element 3 Dipstick assembly Low pressure filters

46 Tanktop Mounted Return Line Filters Tanktopper Series I,II & III Specification (cont.) Tanktopper II F Free element clearance (3.94) 4 (.59) (D) 4xM8 (Min. mm) (3.94) Max oil level +.5 Mounting hole Second port optional 3.2 (H).3 7 (.7) (Port) G /4 G /2 SAE 2 SAE 24 D (SP) (SP) Length H F 4x9 on pitch circle Ø45 Torque-load max. 8 Nm (5.7) ISO 228 G /8 (SP) 8 7 TPR2-2 (7.2) (.7) TPR2-2 (.5) (.3) 4 38 TPR 2-25 (5.75) (4.9) Dimensions in mm 82 (3.23) (Min. mm) (3.94) 2 5 (4.3) (D) 4xM Oil level Ø4 (.57) Tanktopper III 44 (.73) 7 (.73) Top view Free element clearance 35 (5.3) 22 (H) Max oil level Second port optional Mounting hole Ø4 (5.5) ( -max.3 ) For filter with air * breather: In order to keep the minimum required distance under all circumstances, it is recommended to position the filter in the middle of the reservoir Length D H F -G / TPR3-45 (SP) (.34) (3.58) -G /2 53 TPR3-5 (SP) (23.2) (2.87) Dimensions in mm Tanktopper II & III Ref. No. Description Hexagon socket bolt M8 2 Air breather cap 3 Air breather filter medium 4 Cover (assembly) 5 Cover seal ridge 7 Magnet set 8 Element 9 Sleeve Filter house Airguide 2 Tank gasket 3 Funnel 4 Dipstick assembly 4 * 4x on pitch circle 85 ISO 228-G/8 (SP) Torque-load max. 5 Nm (4.33) (4.33) For filter with air breather: In order to keep the minimum required distance under all circumstances, it is recommended to position the filter in the middle of the reservoir 5 (4.3) (Min. mm) (3.94) 2 3 Oil level -max.4 3 (5.2) Ø4 (.57) Top view 48 Parker Hannifin Filter Division Europe FDH2UK. Section 5

47 Tanktop Mounted Return Line Filters Tanktopper Series I & II Pressure Drop Curves - Tanktopper I Filter housing and element pressure drop based on 32cSt fluid viscosity and.87 density. Length Length 2 TPR-I-4 Empty Housing TPR-I-8 Empty Housing TPR4 Filter Element Length TPR8 Filter Element Length Q Q Q Q 2Q Q Q 2Q TPR4 Filter Element Length (cellulose and stainless steel) TPR8 Filter Element Length 2 (cellulose and stainless steel) C 4W C 4W Pressure Drop Curves - Tanktopper II Filter housing and element pressure drop based on 32cSt fluid viscosity and.87 density. TPR II-2 TPR II-2/25 Empty Housing (G /4 Ports) Empty Housing (G /2 Ports) Low pressure filters

48 Tanktop Mounted Return Line Filters Tanktopper Series II & III Pressure Drop Curves - Tanktopper II (cont.) Filter housing and element pressure drop based on 32cSt fluid viscosity and.87 density. TPR2 Filter Element Length 5 TPR2 Filter Element Length Q. 5Q.5.4 Q.3.2 2Q Q.7. 5Q.5.4 Q.3.2 2Q TPR25 Filter Element Length Pressure Drop Curves - Tanktopper III Q 5Q. Q.5 2Q Filter housing and element pressure drop based on 32cSt fluid viscosity and.87 density. TPR III-45/5 Empty Housing /2 SP TPR45 Filter Element Length TPR5 Filter Element Length Q Q Q Q 2Q Q Q 2Q Parker Hannifin Filter Division Europe FDH2UK. Section 5

49 Tanktop Mounted Return Line Filters Tanktopper Series I,II & III Ordering Information Standard products table Part number Supercedes TPRQLP2EG2E TPR4-G 3 /4 PXWL- 5 MM MA TPR2QLP2EG2E TPR4-G 3 /4 PXWL-2 5 MM MA TPR2QLP2EG2L TPR8-G 3 /4 PXWL2- A5 MM MA TPR22QLP2EG2L TPR8-G 3 /4 PXWL2-2 A5 MM MA TPR5QLP2E2G2 TPR2-2G /4 PXWL3-5 MM TPR52QLP2E2G2 TPR2-2G /4 PXWL3-2 5 MM TPR7QLP2E2G24 TPR25-2G /2 PXWL4A- 5 MM TPR72QLP2E2G24 TPR25-2G /2 PXWL4A-2 5 MM TPRQLP2E2G24 TPR5-2G /2 PXWL8-5 MM TPR2QLP2E2G24 TPR5-2G /2 PXWL8-2 5 MM Flow (l/min) Model number Element length TPR4 Length TPR4 Length TPR8 Length 2 TPR8 Length 2 TPR2 Length 5 TPR2 Length 5 TPR25 Length 7 TPR25 Length 7 TPR5 Length TPR5 Length Media rating (µ) Seals Indicator Plugged Plugged Plugged Plugged Plugged Plugged Plugged Plugged Plugged Plugged ypass settings.5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi).5 ar (22 Psi) Ports G 3 /4 G 3 /4 G 3 /4 G 3 /4 2xG /4 2xG /4 2xG /2 2xG /2 2xG /2 2xG /2 Included options Magnets Magnets Aluminium funnel, magnets Aluminium funnel, magnets None None None None None None Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above. Replacement elements 93792Q 93794Q 93793Q 93795Q Q Q Q Q 93794Q 93797Q Supercedes PXWL- PXWL-2 PXWL2- PXWL2-2 PXWL3- PXWL3-2 PXWL4A- PXWL4A-2 PXWL8- PXWL8-2 Visual indicator Thread connection G /8 FMUG2EPG2L Specifications Elec.rating 42V / 2A Thread connection G /8 Elec.connection AMP terminal.3x.8 Protection IP5 (terminal IP) Switch type NO or NC FMUS2EMG2L (NO switch) FMUS3EMG2L (NC switch) Normally open contacts Normally closed contacts Product configurator Configurator example TPR filter ox TPR ox 2 2 ox 3 5QL ox 4 ox 5 S2 ox I ox 7 G2 ox 8 L ox TPR ox 2 Housing TPR -4 TPR -8 TPR 2-2 TPR 2-2 TPR 2-25 TPR 3-45 TPR 3-5 Filter type ox 3 Element media Disposable element (TPR I only) LEIF element (for all TPR Filters) Cellulose Nom. rating C Degree of filtration Glass fibre Microglass III (for disposable elements) Ecoglass III (for Leif elements) 2µ media 5µ media 2Q 5Q 2QL 5QL µ media Q QL 2µ media 2Q 2QL Wire mesh Abs. rating 4W ox 4 Seal material Fluoroelastomer ox 7 Seal type Filter connection Ports G 3 /4 (SP) (TPR Series) SAE2 (TPR Series) G /4 (SP) (TPR 2 Series) 2 x ISO 228-G /4 (SP) (TPR 2 Series) SAE 2 (TPR 2 Series) 2 x SAE 2 (TPR 2 Series) SAE 24 (TPR 2 Series) 2 x SAE 24 (TPR 2 Series) G /2 (SP) (TPR 2 and 3 Series) G /2 (SP) (TPR 2 and 3 Series) on request G2 S2 G2 2G2 S2 2S2 S24 2S24 G24 2G24 ox 5 Indicator Pressure gauge, setting.2 bar, G /8 Pressure switch 42V,.2 bar setting, NO with G /8 Pressure switch 42V,.2 bar setting, NC with G /8 Pressure switch 25V, NO/NC with G /8 No indicator, indicator ports not machined No indicator, indicator port R plugged No indicator, indicator ports L + R plugged Other settings for indicators / gauges on request ox 8 Options Options Standard Dipstick Aluminium funnel for TPR -8 Magnets for TPR Series Magnets + Dipstick for TPR Series Magnets + Aluminium Diffuser for TPR Series Magnets + Aluminium Diffuser + Dipstick for TPR Series Other combinations J E K L M on request Note: Tanktopper I Series are standard supplied with POM type diffuser. Aluminium funnel is recommended for heavy duty applications, sensitivity for electrostatically charging or high fluid temperatures. Tanktopper II and III Series are always supplied with metal diffuser. G2 S2 S3 S4 on request on request P2 on request ox ypass valve ypass valve.8 bar.5 bar 2.5 bar (TPR Series only) locked bypass Other bypass settings E I on request on request Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability. Highlights Key (Denotes part number availability) Item is standard Item is standard with green options Item is semi standard Item is non standard Note: Standard items are in stock, semi standard items are available within four weeks 5 Low pressure filters

50 Tanktop Mounted Return Line Filters Tanktopper Series I,II & III Ordering Information (cont.) ßx(c)=2 5.% Average filtration beta ratio ß (ISO 889) / particle size µm [c] ßx(c)= ßx(c)=75 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% Degree of filtration 9% % % % Media code 2Q/2QL 5Q/5QL Q/QL 2Q/2QL TPR -4 TPR -8 TPR 2-2 TPR 2-2 TPR 2-25 TPR 3-25 TPR 3-45 TPR 3-5 Supercedes spare element table PXWL Q PXWL Q PXWL Q PXWL Q PXWL4A Q PXWL Q PXWL Q PXWL Q PXWL Q PXWL Q PXWL Q PXWL Q PXWL4A Q PXWL Q PXWL Q PXWL Q PXWL Q PXWL Q PXWL Q PXWL Q PXWL4A Q PXWL Q PXWL Q PXWL Q PXWL Q PXWL Q PXWL Q PXWL Q PXWL4A Q PXWL Q PXWL Q PXWL Q Supercedes spare element table TPR -4 TPR -8 TPR 3- TPR 3-25 TPR 3-45 PXXA PXX2A PXWA Q PXW2A Q PXW Q PXW Q PXW Q PXWA Q PXW2A Q PXW Q PXW Q PXW Q PXWA Q PXW2A Q PXW Q PXW Q PXW Q PXWA Q PXW2A Q PXW Q PXW Q PXW Q PSA PS2A Parker Hannifin Filter Division Europe FDH2UK. Section 5

51 Tanktop Mounted Suction & Return Line Filters - Types SR & SR2 Suction Return Series MAX 25 I/min - bar AN INNOVATIVE GREEN FILTER FEATURING LEIF LEIF 53 Low pressure filters

52 Tanktop Mounted Suction & Return Line Filters - Types SR & SR2 Suction Return Series Features & enefits Features Compact design ypass valve mounted in series with back-pressure valve LEIF elements Strainer located in filter head High level of customisation Full flow bypass with low hysteresis Standard or customised funnel Multiple ports availability Advantages Less space required to apply SR Series Pressurisation of filtered oil for hydrostatic drive ensured during bypass Patented element safeguards the use of genuine parts Strainer filters all bypass fluid by using a systemmatched degree of filtration Dedicated system-matched solutions can be easily made available Reduction of bypass period due to low hysteresis Only a small part of the total flow is bypassing the element Ensures that oil enters the tank under the oil level Flexibility related to suction- and return line hose(s) arrangement enefits Improved flexibility during system design Lower risk of pump cavition No direct bypass in the tank reducing the additional risk of oil foaming Guaranteed quality of filtration Contributes to ISO 4 certification Improved protection of system Strainer can be inspected and cleaned during service events Improved integration of filter in system combined with lower initial system costs Improved protection of system Significant reduction of oil foaming More compact solutions can be realised The use of manifold blocks can be avoided Easy to integrate with cooler circuit Typical Applications Mobile equipment with both open and closed hydraulic circuits. For exemple: Road sweepers Road rollers Fork lift trucks Loading shovels Telescopic handlers Dump trucks Skid steers Agricultural harvesting machines Mini excavators The Parker Filtration Tank Top Mounted Suction & Return Line Filters. A tank top mounted return filter capable of feeding filtered oil under positive pressure to the suction side of the boost pump, thereby filtering both open and closed loop oil systems through one filter. The Type SR2 uses the patented LEIF elements for environmentally-friendly filtration and offering protection against the use of pirate elements. Several options including integrated suction strainer and dipstick are available. Optional strainer Separator plate with.7 bar bypass Filtered oil at.5 bar pressure Filtered oil return to tank Filtered oil supply to charge pump Return oil Green LEIF filter element, flow direction out to in Valve assembly.5 bar back pressure valve with integrated anti cavitation valve 54 Parker Hannifin Filter Division Europe FDH2UK. Section

53 Specification Pressure ratings: Max. bar. Assembly: Tank top mounted filters. Connections: Return port G (to S 2779). Suction port G 3 /4 (to S 2779). Return port G /4 (ISO 228) or SAE2: Optional second return port type SR2. Suction port G (ISO 228) or SAE: Standard two suction ports. Seal material: Type SR. Type SR2, Fluoroelastomer. Other seal material on request. Operating temperature range: -3 to + C. ypass valve system: Main system bypass valve. Type SR.7 bar (2.5 bar optional). Type SR2.7 bar (2.5 bar optional). Degree of filtration: Determined by multipass test according to ISO 889. Flow fatigue characteristics: Filter media designed to optimise fatigue life. } } SR SR2 Filtration media: Type SR and SR2 Microglass III supported with epoxy coated metal wire. Ecoglass III for LEIF element. See table and 2 on the following page. - High dirt holding capacity. - Low pressure drop. - Extended service life. Element collapse rating: Type SR 2 bar ISO 294. Type SR2 bar ISO 294. Suction line: ack-pressure valve setting.5 bar (nominal). Anti-cavitation: Emergency suction valve fitted as standard. Construction: Type SR Type SR2 Filter Precision pressure Precision pressure Housing: die casting die casting Cover: Precision pressure Glass reinforced nylon die casting (high impact and temperature resistant) Weight:.4Kg 3.3Kg Filter Element with LEIF element with reusable metal element: steel end caps element sleeve. The patented LEIF concept contributes to ISO 4 and can only be applied to mineral oils. For other fluid types consult Parker Filtration. Circuit Application Example Suction Return Filter: Hydraulic Circuit R Open circuit operating hydraulics.7 bar ypass valve Filter element Suction return filter assembly Power take off Closed loop circuit example Anti cavitation valve Optional strainer.5 bar (Nominal) ack pressure valve S Tank Note: Suction return filter without optional strainer. Note: Suction return filter with optional strainer. 55 Low pressure filters

54 Tanktop Mounted Suction & Return Line Filters - Types SR & SR2 Suction Return Series SR Outlet port (S) G 3 /4 or 3 /4 NPT (optional) F E A D Element removal distance C H max Inlet port (R) G or NPT (optional) Table Degree of filtration Average filtration ratio ß (ISO 889) / particle size (µm(c) Q Q2 ØG Tank hole out-out ØJ I max Alternative position for indicators K square 2 holes Ø7. on A 5. PCD 2 holes Ø. on a 5. PCD Minimum oil level L Plastic port plugs for transit 4.25 SR2 Optional second return port F E A C 3.2 H max Table 2 Degree of filtration Average filtration ratio ß (ISO 889) / particle size (µm(c) Q Q2 ØG Alternative position for indicators Tank hole cutout ØJ max. 25 I max D 4 holes Ø. on a 5 PCD K square Minimum oil level L Optional pressure switch 27 Dimensions mm (inches) Type SR Type SR2 A C D E F G H I J K L 98 (3.8) 42 (5.59) 55 (2.7) 4 (2.52) Element removal distance for dimension C. 3 (2.2) 38 (4.9) (.7) 8 (3.9) 2 (.2) 45 (.77) 25 (.98) 3 (.42) 73 (2.87) (3.94) 92.8 (3.5) 37 (5.39) (5.7) 44 (7.32) 75 to 7 (5 to 9) to 3 (3.98 to 4.) 5 (4.3) 45 (5.7) 72 (2.83) 8 (3.9) 5 Parker Hannifin Filter Division Europe FDH2UK. Section

55 Indicator Details Protective cover Normally open contacts Visual indicator Thread connection 2 bar G /8 FMUG5HMG2L G /8 (SP) Mx Ø28 24 A/F Normally closed contacts Elec.rating Thread connection Elec.connection Protection Setting Switch type Pressure switch 42V / 2A G /8 AMP terminal.3 x.8 IP5 (terminal IP) 2 bar NO or NC FMUSHMG2L (NO switch) FMUS7HMG2L (NC switch) Note: Vacuum indicators visual or electrical are available on request for filter type SR2 only. Principles of Operation Suction Return Series filter This one filter assembly is designed to carry out two specific functions: () Filter system return line oil. (2) Supply filtered oil under positive pressure to the closed loop hydrostatic circuits. Principles of operation () Return oil from both the open and closed circuits* is fed into the Suction Return Series Filter at port R. (2) The filtered oil is maintained at a nominal.5 bar by the unique back pressure valve assembly and fed into the closed loop hydrostatic circuit via port S. (3) Surplus filtered oil is fed back to the tank via the back pressure valve assembly. (4) Emergency suction (anti-cavitation) valve: This valve is fitted as standard to ensure oil is always available to the closed loop system, even on emergency occasions when the return flows do not meet the flow demands of the closed loop circuit. Additional installation guidance notes () Return oil flow should always be greater than the oil flow rate demanded by the closed loop charge pump. (2) Oil level at all times should not fall below valve assembly at the base of the filter bowl. enefits () Only one filter is required to supply filtered oil to both open and closed loop circuits. (2) Feeding the closed loop circuit with filtered oil at a nominal pressure of.5 bar ensures excellent cold start characteristics, thus reducing the risk of cavitation. (3) Four hole mounting with gasket seal. (4) Microglass III filter element materials ensure; low pressure drop, high dirt holding capacity and extended service life. (5) Type SR2 filter with patented LEIF element, unique drain construction, quick element replacement concept. * CAUTION: ack pressure in pump and motor drain lines should always be kept at a minimum thus protecting shaft seals etc. If case drain oils are to be fed through the return line filter please consult the pump/motor manufactures for details on maximum allowable back pressure. Ensure filter elements are replaced when element condition indicators show that the bypass setting has been reached. Failure to observe the above operation and guidance notes, or use of non genuine Parker specified filter elements could cause damage to the system. System designers should always ensure that adequate cooling capacity is available. 57 Low pressure filters

56 Tanktop Mounted Suction & Return Line Filters - Types SR & SR2 Suction Return Series Pressure Drop Curves (Type SR) The recommended level of the initial pressure drop is approximately bar. If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows: The total p = Housing ph + (Element pe x working viscosity/32). SRA Empty Filter Housing SRA Filter Element Length cst cst Q Q Curves are based on 32cSt fluid viscosity and.87 Kg/l density. Pressure Drop Curves (Type SR2) Curves are based on 32cSt fluid viscosity and.87 Kg/l density. SR2 Empty Filter Housing SRL2 Filter Element Length Empty Housing.3.25 Q Q Parker Hannifin Filter Division Europe FDH2UK. Section

57 Ordering Information Standard products table Part number SRA2QPGG2 SRA22QPGG2 SRL22QLPGG2 SRL222QLPGG2 Supercedes SRA2QNP SRA2Q2NP SRL22QNP SRL22Q2NP Flow (l/min) Model number SRA SRA SRL2 SRL2 Element length Length 2 Length 2 Length 2 Length 2 Media rating (µ) Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above. 2 2 Seals Indicator Plugged Plugged Plugged Plugged ypass settings.7 ar (25 Psi).7 ar (25 Psi).7 ar (25 Psi).7 ar (25 Psi) Ports return G G G /4 G /4 Ports suction G 3 /4 G 3 /4 2xG /4 2xG /4 Included options None None None None Replacement elements Q Q 93794Q Q Supercedes SRR2QN SRR2Q2N SRE22Q SRE22Q2 Product configurator Configurator example SR filter ox SRL2 ox 2 2 ox 3 5QL ox 4 ox 5 S2 ox G ox 7 2G2 ox 8 I ox ox 2 Housing Reduced length Standard length Extended length Filter type Model SR Series with conventional element SR2 Series with LEIF element on request 2 on request ox 3 SRA SRL2 Element media Disposable element (for SRA only) LEIF element (for SRL2 only) Degree of filtration Glass fibre Microglass III (for disposable elements) Ecoglass III (for Leif elements) 2µ media 5µ media 2Q 5Q 2QL 5QL Highlights Key (Denotes part number availability) Item is standard Item is standard with green options Item is semi standard Item is non standard Note: Standard items are in stock, semi standard items are available within four weeks µ media Q QL 2µ media 2Q 2QL ox 4 Seal material Fluoroelastomer Seal type V ox 5 Indicator Pressure gauge, setting 2. bar, G /8 Pressure switch 42V, 2. bar setting, NO with G /8 SP Pressure switch 42V, 2. bar setting, NC with G /8 SP Pressure switch 25V, NO/NC with G /8 No indicator, indicator ports not machined No indicator, indicator port R plugged No indicator, indicator ports L + R plugged Vacuum switch / vacuum gauge Other settings for indicators / gauges on request G5 S S7 on request N P on request on request on request ox ypass valve.7 bar 2.5 bar locked bypass Other bypass settings ypass valve G I on request on request ox 7 Filter connection Ports Return port x G + Suction port x G 3 /4 Return port x G /4 + Suction port 2 x G Return port 2 x G /4 + Suction port 2 x G Return port x SAE2 + Suction port 2 x SAE Return port 2 x SAE2 + Suction port 2 x SAE G2 G2 2G2 S2 2S2 Note SR SR2 SR2 SR2 SR2 ox 8 Options Options None Strainer 2 micron Dipstick Plugged vent port in cover Strainer 2 micron, dipstick and plugged vent port Customized options G H I on request ßx(c)=2 5.% Degree of filtration Average filtration beta ratio ß (ISO 889) / particle size µm [c] ßx(c)= ßx(c)=75 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% 9% % % % Media code 2Q/2QL 5Q/5QL Q/QL 2Q/2QL Replacement elements Q Q Q Q 93794Q Q Spare elements Supercedes SRR2Q5N SRR2QN SRR2Q2N SRE22Q5 SRE22Q SRE22Q2 Semi standard Standard Standard Semi standard Standard Standard Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability. 59 Low pressure filters

58

59 Hydraulic Reservoir Solutions Co-Polymer and Steel Reservoirs AN INNOVATIVE GREEN FILTER FEATURING LEIF LEIF Low pressure filters

60 Hydraulic Reservoir Solutions Co-Polymer & Steel Reservoirs Features & enefits Parker hydraulic tank solutions are applied to a wide variety of markets Hyd. & lube oil filtration Co-polymer tanks Steel tanks Agriculture X X Construction equipment X X Marine Material handling Mining Road building equipment X X Transportation X X Waste management / Environmental control X X An introduction to Parker Hydraulic Reservoir Solutions Parker s experience in designing fluid power equipment will help a system designer to save costs at every stage of hydraulic system development. Co-polymer tank example X Original Equipment Manufacturers are continually looking to reduce manufacturing costs and increase operating efficiency and it s here that Parker Hannifin s European Filtration Division offers complete solutions. eside high quality steel tanks designed and supplied by Parker and featured in this brochure, Parker also designs and supplies revolutionary, lightweight co-polymer reservoirs with tank top mounted or integrated filter and tank air filter options. X X oth tank types can typically represent a significant contribution to cost savings. ecause of the differing features and benefits between the metal and co-polymer tanks, Parker is able to offer customers the most appropriate tank concept to meet their specific requirements. Saving costs with complete Parker Hydraulic Tank Solutions A partnership in supply chain management reduces costs An integration of reservoir functions Reduction of component parts Integrated hydraulic filter and air filter benefits Integrated oil level measurement benefits Standard & customised solutions offered Flexibility related to shape & dimension of each tank Leak-proof connections Patented element for guaranteed quality filtration Steel tank example Typical Applications Unique tank solutions designed to meet customer needs Parker designs and supplies both co-polymer and steel reservoirs. Today Parker steel tank solutions are typically applied to commercial vehicle applications for example waste management and the transportation market. Customers manufacturing hook-arm systems, truck manufacturing or vehicle body builders are further examples of potential customers for a complete steel tank assembly. A more common use of co-polymer tanks can be seen in materials handling equipment, agricultural and construction equipment markets. Typical applications are warehouse trucks, smaller sized wheeled loaders, telescopic handlers, dumpers, mini excavators and agricultural machinery. with the courtesy of Geesink.V. 2 Parker Hannifin Filter Division Europe FDH2UK. Section 7

61 Specifications Product Architecture Type of tank Filters & accessories customised steel tank On request Steel or co-polymer tank customised co-polymer tank Standard steel tank IN-AG with integrated breather TPR I and II SR I and II series Tank air filter IP5 compact series AL series thread mounted EA series flange mounted ETF TTF SR I and II TPR I and II Steel tank with integrated options Co-polymer tank with integrated filter & air filter Design aspects Co-polymer reservoir Steel reservoir Example of co-polymer tank with top mounted filters and air filters Complicated shapes Styling of reservoir meets overall styling of vehicle Weight reduction Long-term temperatures (depends of Tmin< -3 C or material properties) X Tmax> +2 C High mechanical load on tank (tank contributes to strength of chassis) All-in-one concept High level of tank Pressurisation Suitable for heavy duty equipment X X X X X X X X Design note: All customised tanks are engineered solutions based on detailed analysis of customer requirements and specifications. Detailed knowledge of co-polymer materials, implies that customised materials can be made available to meet specific demands. Depending on technical and commercial requirements, Parker is able to advise each customer individually, about the most suitable and economical reservoir solution, made from co-polymer or steel. 3 Low pressure filters

62 Hydraulic Reservoir Solutions Co-Polymer Reservoirs Features, enefits & Specifications Where a tailormade tank design is the solution The lightweight co-polymer tank is an all-in-one solution that keeps in mind a customer s specific design requirements. Each tank is unique in terms of shape, dimensions and integrated functions. It is equipped with an integrated tank top mounted return line filter and tank air filter. All filters and air filters are supplied as standard with the patented, environmentally friendly LEIF element. Reliable connections Reliable, leak-proof connections have always been a critical aspect for co-polymer tanks. Parker has developed a technology using metal attachment components. All metal attachment components are moulded in with the co-polymer tank wall, ensuring a reliable, leak-proof connection between the tank and the components that are attached to it. Customised integrated metal attachment Tank also features integrated level measurement Level measurement Oil level indication can be fully integrated into the tank design. This feature eliminates the need for level glasses, which are fragile and an additional potential source of leakage when mounted incorrectly. Parker Filtration has designed high tech sealing solutions for tank top mounted filters. These attached connections (e.g. a suction connection for pumps, drains, vents, or a filler opening) can easily be achieved, as well as providing indications for minimum and maximum oil levels. Metal attachment connections can be made available for hose couplings, a flange attachment or thread attachment. Co-polymer reservoirs are designed to meet the stringent demands of our customers. All relevant aspects are analysed, from material properties and operational conditions to dynamic load and requirements for equipment servicing. Example of customised co-polymer tank 4 Parker Hannifin Filter Division Europe FDH2UK. Section 7

63 Features, enefits & Specifications Integrated air breather (with optional water removal media) Air flow through air breather labyrinth Return line connection Integrated return line filter type IN-AG filter has In-to-Out flow direction Pressure gauge or switch Oil level indication Example of a customised tank with an integrated return line filter and air filter The ultimate all-in-one design A more frequent use of co-polymer tanks located on the outside of mobile equipment often results in specific requirements relating to styling. Despite the compact design of Parker tank top mounted filters and air filters, these parts can influence aspects related to styling or cabin accessibility. This concept is ideal for applications where space is at a premium. Parker Filtration s unique all-in-one design, where the return line filter and air filter are both located under one cover is a concept that offers great possibilities related to tank styling. The high quality of the co-polymer material ensures a longterm stability of the chosen colour. This all-in-one design features the IN-AG type return line and integrated air filter with labyrinth. The labyrinth prevents oil leakage through the air filter. The connection(s) for return line(s) and filler port are integrated in the tank. This avoids having to have hydraulic hoses placed on top of the tank. LEIF elements: Environmentally friendly filtration Re-usable steel element sleeve Patented elements result in guaranteed quality of filtration Saves element disposal costs typically by up to 5% Supports ISO 4 certification Environmentally friendly Parker considers care for the environment as a social obligation. The environmentally friendly LEIF element (Low Environmental Impact Filter) is applied to the return line filters and breathers type AL and EA. What makes this element so special is that the metal sleeve can be re-used. As a result, this filter element component no longer ends up in the waste disposal; only the contaminated filter medium is disposed of as chemical waste. With LEIF filter elements, the disposal and processing cost may be reduced by as much as 5%. The LEIF concept safeguards the use of genuine Parker parts. IN-AG with LEIF element Cost-effective The advantages of this co-polymer concept are obvious: Lightweight Flexibility with respect to tank shapes Characteristics of plastic material can be customised to meet specific requirements Integration of several functions limits the use of individual components The tank can be purchased and supplied as a complete unit 5 Low pressure filters

64 Hydraulic Reservoir Solutions Steel Reservoirs Features, enefits & Specifications Parker steel reservoirs designed to withstand extreme conditions Standard steel tanks are often specified for commercial vehicle side mounting. Parker steel tanks are built to last in extreme conditions. Extreme weather conditions and heavy duty vehicle movements can be resisted by our tank design. Quality design As with co-polymer tanks, steel tanks offer leak proof connections and are vigorously tested against leakage. Additionally, they are painted with primer and topcoat to ensure maximum protection against corrosion. Suction port(s), covered with anti-vortex plate(s), allow low oil levels giving the operator an increased operational capacity. efore delivery the steel tanks are thoroughly washed inside and ready for system assembly. Diverse tank size options are available With space at a premium in most truck chassis configurations and the need to deal with toolboxes, compressed air reservoirs and other equipment, tank dimensions are always an issue. To meet the specific environment requirements Parker Filtration offers several tank sizes. Steel tanks are fully equipped. Our customers can choose from a wide choice of filter options. Parker considers care for the environment. The environmentally friendly LEIF element is also applied to steel tank solutions. Additionally, Parker steel reservoirs are equipped with an efficient air filter, a level gauge, plugs, a suction kit and mounting brackets. The level gauge can be relocated on the other side of the tank if user visibility is an issue. Technical data steel tanks Material: 2mm steel plate applied for standard reservoirs Suction connection: Suction connections at the back and the bottom of the tank swivel type nominal size 2, 2 /2 and 3. Steel tank with Tanktopper II filter To help reduce dirt build-up, our steel tanks are designed with smooth corners and the upper front part of the tank can be sloped which offers extra benefits: Easier service access for the filter and tank air filter Dirt, water, snow and ice will not adhere to the tank surface next to the breather and filter Air filter: Ref. product selection for types: IP5 AL EA Tank top mounted return filter TTF ETF Tanktopper I & II (with integrated air breather) SR series (Suction & Return filters) Support frame and fasteners Included as standard Holes must be drilled into the plate x 28mm for attachment to the frame for standard steel reservoir Steel tank with with customised chassis mounting straps Detailed sectional view of Tanktopper II with integrated air filter Parker Hannifin Filter Division Europe FDH2UK. Section 7

65 Ordering Information Product configurator Configurator examples SR filter ox S ox 2 ox 3 R ox 4 S ox 5 ETF4 ox Q ox 7 E ox ypass valve Material Steel (standard tank shape) Steel (customised tank design) Co-polymer (customised tank design) S on request on request ox 2 Tank volume Operating volume (L) Gross volume (L) H x D x W x 5 x x 5 x x 5 x x 5 x x 5 x x 5 x ox 3 ox 4 Level glass Location Right hand side Left hand side R L Suction port options Suction port connections Swivel type 42mm (nominal 2") Swivel type 55mm (nominal 2 /2") Swivel type SAE 3" G2" - Female SP (ISO 228) G2 /2" - Female SP (ISO 228) G2" - Female ball valve (manual operated) G2 /2" - Female ball valve (manual operated) N W S (standard steel tanks) to be specified to be specified to be specified to be specified ox 5 Filter model Other filter sizes are available Filter Qmax ETF4QP2FG4 2 ETF4 TTF7QLP2EG TTF7 TPR7QLP2E2G24 25 TPR7 SRL22QLPGG2 25 SRL22 Note: Refer to the relevant product information to compose the required filter configuration. ox 7 Tank air filter Tank air filter type IP5 (breather only) Flange mounted style (compact design) EA EA2 Anti splash style filter (threaded connection) AL AL2 IP5 E E2 AL AL2 Note: filter codes are based on (c) 2 glass fibre elements other degrees of filtration are standard available. ßx(c)=2 5.% Average filtration beta ratio ß (ISO 889) / particle size µm [c] ßx(c)= ßx(c)=75 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% Degree of filtration 9% % % % Media code 2Q/2QL 5Q/5QL Q/QL 2Q/2QL Highlights Key (Denotes part number availability) Item is standard Item is standard with green options Item is semi standard Item is non standard Note: Standard items are in stock, semi standard items are available within four weeks Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability. 7 Low pressure filters

66

67 Spin-on Filters Maxiflow Series MAX 3 I/min - bar 9 Low pressure filters

68 Spin-on Filters Maxiflow Series Features & enefits Features Integrated indicator High quality paint for canisters Spin-on filters available for suction and return line filtration High quality filter medium Advantages Compact and robust durable construction Long term protection against corrosion Flexible product offering Filter medium suitable for fatigue load due to high frequent flow fluctuation enefits Easy identification of element status Improved protection of filter medium Standardisation of components Extended element life time Typical Applications Telescopic handlers Refuse vehicles Road sweepers Compactors Industrial power units Grass cutters Press brakes The Parker Filtration Maxiflow Full Flow Filters for Suction or Return. Size and 2 Maxiflow Filters feature two integral red/green indicators incorporated into the head casting design. Fitted as standard, they ensure maximum indicator visibility and early warning of filter condition. Size 3 Maxiflow features one integral indicator. 7 Parker Hannifin Filter Division Europe FDH2UK. Section 8

69 Specification Preferred Series MXA PS Series Maximum working pressure: bar bar Filter head material: Aluminium LM24 Aluminium alloy Filter bowl material: Steel Steel Seal material: una (nitrile) Operating temperature range: -3 C to +9 C -3 C to + C ypass: Return line.5 bar Return line.5 bar Suction line.7 bar Suction line. bar No bypass option No bypass option Fluids: Mineral oils Mineral oils Element media: Microglass III media Cellulose media Installation Details MXA.8/MXA.9*** 2PS/22PS Size 3 MXA.7*** D A C F G H D C A F Inlet 7 2 mounting holes L F Ø29 H J 23 (4.84) 7 2 (4.) (2.75) Minimum for element removal Minimum for element removal 2 ØJ 2 mounting holes L 2PS-5 22PS-2 Element removal clearance K H K C 2 (.79) D 2 (.79) Minimum for element removal L Filter selection To select the correct filter use the appropriate pressure drop graphs. For details and an example of how to select the correct filter, see next page. M Ø54 (2.2) A 2 ports /8 SPT for optional indicators Circuit symbol Type A C D F G H J K L M MXA.8 2PS MXA.9 22PS MXA.7 G 3 /4 G /4 G /2 9 (.75) 22 (.8) 3 (.8) 28 (.) 43 (.93) 47 (5.79) 5 (.49) 79 (7.4) 28 (8.9) 79 (7.5) 73 (.8) 87 (7.3) 23 (8.38) 23 (9.29) 24 (8.42) 95 (3.74) 95 (3.74) 33 (5.24) 33 (5.23) 4 (5.5) 97 (3.82) 29 () 38 (.49) 38 (.49) 5 (.97) 5 (.97) 5 (2.5) 94 (3.7) 93 (3.) 27 (5.) 3 (5.2) 27 (5.) 88 (3.4) 7 (4.2) 3 (5.2) M8 x.25 x full depth M x.5 72 (2.83) 72 (2.83) 7 Low pressure filters

70 Spin-on Filters Maxiflow Series Pressure Drop Curves The recommended level of the initial pressure drop for low pressure filters is max.5 bar. If the medium used has a viscosity different from 3cSt, pressure drop over the filter can be estimated as follows: p = ( p3 x viscosity of medium used) / 3cSt. Size Maxiflow (MXA.8*** Series) and 2PS Series Filter Housing Filter Element µ Abs 25 Abs Size 2 Maxiflow (MXA.9*** Series) and 22PS Series Filter Housing Filter Element µ Abs 25 Abs Size 3 Maxiflow (MXA.7*** Series) Filter Housing Filter Element µ Abs.4.3 Abs Note: All above data is calculated at 3cSt Rel density Parker Hannifin Filter Division Europe FDH2UK. Section 8

71 Ordering Information Type Part number Description MXA.8*** & 2PS Return Line Filters MXA PS MXA PSTVR2 Assembly with bypass & dual visual indicators Assembly with bypass & gauge type visual indicators MAOP Flow Media Replacement Ports (bar) (l/min) rating element 7 micron abs. G 3 /4 MXR855 MXA PS MXA PSCTVR2 2PSCTE2R2 2PSCTPR2 Assembly with bypass & dual visual indicators Assembly with bypass & gauge type visual indicators Assembly with bypass & electrical pressure indicator Assembly with bypass & no indicator 7 micron nom. G 3 /4 MX584X4 (x4*) MXA.8*** & 2PS Suction Line Filters MXA PS MXA PS MXA PSCTVS4 MXA PSCTVSX4 Assembly with bypass & dual visual indicators Assembly with bypass & gauge type visual indicator Assembly without bypass, with dual visual indicators Assembly without bypass, with gauge type visual indicator 2 micron nom. G 3 /4 MX584X4 (x4*) MXA.9*** & 22PS Return Line Filters 3 micron MXA MXA95424 Assembly with bypass & dual visual indicators 3 G /4 MXR95 abs. 3 Micron abs. filtration for Off-Line and ypass System Clean Up Maxiflow 3 micron elements are ideal for off-line or bypass clean up applications. These can be specified for the 9*** and 7*** series return line filters MXA PS PS PS MXA PSTVR2D 22PSTE2R2D 22PSTPR2D Assembly with bypass & dual visual indicators Assembly with bypass & gauge type visual indicators Assembly with bypass & electrical pressure indicator Assembly with bypass & no indicator 8 micron abs. G /4 MXR955 MXA PS PS PS MXA PSCTVR2D 22PSCTE2R2D 22PSCTPR2D Assembly with bypass & dual visual indicators Assembly with bypass & gauge type visual indicator Assembly with bypass & electrical pressure indicator Assembly with bypass & no indicator 8 micron nom. G /4 MX594X4 (x4*) MXA.9*** & 22PS Suction Line Filters MXA PS MXA PS MXA PSCTV2S4D MXA PSCTPSX4D Assembly with bypass & dual visual indicators Assembly with bypass & gauge type visual indicator Assembly without bypass, with visual indicators Assembly without bypass, no indicator 48 micron nom. G /4 MX594X4 (x4*) MXA.7*** Return Line Filters micron MXA MXA Assembly with bypass & dual visual indicators 3 G /2 MXR955 abs. MXA MXA75424 Assembly with bypass & dual visual indicators 35 micron nom. G /2 MX594X4 (x4*) MXA.7*** Suction Line Filters MXA MXA MXA75523 Assembly with bypass & visual indicators Assembly without bypass with visual indicators 8 micron abs. G /2 MXR955 MXA MXA75223 MXA7523 Assembly with bypass & visual indicators Assembly without bypass with visual indicators The Maxiflow Series 7*** can be specified with additional visual or electrical indicators. Please consult Parker Filtration for details 8 micron nom. G /2 MX594X4 (x4*) Note: Elements marked with (x4*) are only available in 4 element packs 73 Low pressure filters

72 Notes 74 Parker Hannifin Filter Division Europe FDH2UK.

73 Suction Filters ATZ Series MAX 3 I/min 75 Low pressure filters

74 Suction Filters ATZ Series Features & enefits Features Cast aluminium construction Integrated check valve Magnetic pre-filtration In-to-Out filtration Wide range of vacuum measurement devices Advantages Compact and robust durable construction Filter element can be changed when the filter housing is submerged under the oil in the tank Removes ferro particles, even during bypass conditions All captured contamination retains inside the element Continuous filter condition monitoring enefits Suitable for heavy duty industrial applications Improved protection of sophisticated pumps Improved fluid cleanliness levels Extended element life time No recontamination of system during change of elements Contributes to just-in-time service Improved protection of pump when pressure measurement device connected with pump drive management Typical Applications Wool untangling machine Hydraulic winch Power packs with sophisticated pumps Drilling blocks The Parker Filtration ATZ Series Submersible Suction Filters. ATZ Filters are located below the tank s oil level, offering maximum protection for the hydraulic system pump. When removing the element, the check valve closes automatically, eliminating any chance of oil leakage. Pre-filtration takes place by means of a magnet column. Thanks to the In-to- Out filter principle, contaminated oil cannot leak back into the system. ATZ Filters are capable of handling flow rates up to 3 l/min. 7 Parker Hannifin Filter Division Europe FDH2UK. Section 9

75 Specification Operating pressure: Vacuum. Assembly: Suction line filter, mounted horizontally against tank side. Connections: Threads G /2 (ISO 228) or flanges 2 SAE-3PSI. Filter housing: Aluminium. Seal material:, neoprene, fluoroelastomer. Operating temperature range: -4 to +2 C. ypass valve: locked. Degree of filtration: Determined by multipass test according to ISO 889. Flow fatigue characteristics: Filter media is supported so that the optimal fatigue life is achieved. Filtration media: Microglass III. µ cellulose and 4µ Stainless Steel. Element collapse rating: bar (ISO 294). Pressure indicator options:.5 bar or.3 bar (vacuum gauge) VAC (LI-, 5A, Lr-2, A) (electrical vacuum switch). 2-28Vdc (Li-, A, Lr-3, A) (electrical vacuum switch). Features: Unique check valve, enabling element change below oil level. Filter element: Element with steel end caps. 2 3 ATZ ATZ-3 Protective cover A/F 8 Mx Ø Ref. No. Description olt 2 Seal ring 3 Insert 4 O-ring 5 Element O-ring 7 Filter-housing 8 Gasket 9 O-ring ATZ-2 & ATZ-3 Ref. No. Description Valve support Nut 2 O-ring 3 Valve 4 Ring 5 Spring Valve-housing 7 onded seal 8 Indicator 77 Low pressure filters

76 Suction Filters ATZ Series Specification (cont.) ATZ-2 Min element clearance 3 Ø 4 Ø8.5 Indicator 55 ISO 228 G (SP) PCD 4 32 Visual Elect 35 7 ISO 228 G (SP) Ø25 Tankhole 43 ISO 228 G/2 (SP) Max torque-load filter-tank 8Nm The Parker suction filters, type ATZ, are designed for submerged operation. The filters contain a unique check valve which automatically closes when the filter insert is removed from the housing, thus enabling element change below oil level. Construction is based on the field proven Parker Filter System. Ø ATZ Min element clearance 3 Indicator PCD 95 ISO 228 G /2 (SP) 55 Ø Visual 3 Elect 55 ISO 228 G/2 (SP) Ø7 Tankhole Ø28 23 A A 2/2 SAE (3psi) Max torque-load filter-tank 45Nm M2 89 Ø3 View A-A 78 Parker Hannifin Filter Division Europe FDH2UK. Section 9