Reservoir Accessories Filler Breathers, Strainers, Diffusers, Fluid Level/Temperature Gauges
|
|
- Angela Wheeler
- 6 years ago
- Views:
Transcription
1 Filler Breathers, Strainers, Diffusers, Fluid Level/Temperature Gauges 23
2 Non-Metallic Filler Breathers Materials: Body: Non-corrodible glass filled nylon Valve: Nylon/Nitrile Dipstick: BS, acetal Hi/Lo indicators Filtration Element: Expanded polyurethane foam, micron Operating Temperatures: -22 o F (-3 o C) to 195 o F (9 o C) Seals: Nitrile (single-hole), cork gasket (six-hole) Pressurization Options: 3 psi (.2 bar) Dipstick: (optional) 7.9 in. (2 mm) or 15.8 in. (4 mm) lengths with adjustable Hi/Lo indicators (Non-pressurized) US GLS/SEC (air) PSI nti-splash Design! Differential Pressure (bar) Telescopic Strainer Ø Single-Hole Option Ø Six-Hole Option Ø Differential Pressure (bar) Non-pressurized Single-Hole New Part No. B UC B UC Pressurized Single-Hole Part No. Not vailable Flow 1/sec (air) (Pressurized) US GLS/SEC (air) psi (.2 bar) valve 5 15 Flow l/sec (air) Single-Hole Obs. Part No. FB1.11B2P FB1.11C2P Six-Hole New Part No. B UC PSI Six-Hole New Part No. B UC B UC Six-Hole Obs. Part No. FB1.D1B1C2P Ø Ø TNK MOUNTING HOLE Ø63 NOTE: REFER TO UCC PRODUCTION INSTRUCTIONS FOR SSEMBLY DETILS ND PCKING REQUIREMENTS Six-Hole Obs. Part No. FB1.D11B2P FB1.D11C2P Micron Rating Micron Rating Description MX.39 Ø Linear Measurement= mm in Description 3 psi (.2 bar) with telescopic strainer 6x Ø Filler breather with 3.7" (95 mm) strainer Filler breather with telescopic strainer Ø Screws* (6)-#x.5 (6)-#x.5 Screws* (6)-#x.5 Dipsticks New Part Number B Obsolete Part Number DIP.FB2 Description Pack of () x 7.9" *Mounting screws for six-hole only B DIP.FB4 Pack of () x 15.8" 231
3 Non-Metallic Breathers Non-Metallic Breathers Threaded Type Materials: Body: Nylon 66 Valve: Nylon/Nitrile Dipstick: BS, acetal Hi/Lo indicators Filtration Element: Expanded polyurethane foam, micron Operating Temperatures: -22 o F (-3 o C) to 195 o F (9 o C) Seals: Nitrile Pressurization Options: 3 psi (.2 bar) Dipstick: (optional) 7.9 in. (2 mm) or 15.8 in.(4mm) lengths with adjustable Hi/Lo indicators nti-splash Design! COMPCT THREDED US GLS/SEC (air) PSI Differential Pressure (bar) Standard Threaded Compact Threaded C B B D 2 /F HEX C D 3 /F HEX Thread size Thread size Compact Threaded New Part Number B.6832.UC* B.68Y2.* * SB1.B12 Obs. Part Number SB1.12P* SB1.C12P* B.68Z2.UC* Micron Rating Thread 1/4"NPT 1/2" NPT 3/4" NPT 3/8 NPT Pressure non-pressurized non-pressurized non-pressurized non-pressurized "" 1.6" (4 mm) 1.6" (4 mm) 1.6" (4 mm) "B" "C" 2.2" (57 mm).55" (14 mm) 2.4" (6 mm).53" (13.5 mm) 2.4" (6 mm).55" (14 mm) "D".24" (6 mm).35" (9 mm).35" (9 mm) *Pack of () pieces. Standard Threaded New Part Number Obs. Part Number B UC FB1.B132P B UC FB1.B1B32P Micron Rating Thread 3/4" NPT 3/4" NPT Pressure non-pressurized 3 psi (.2 bar) "" 4." (1 mm) 4." (1 mm) "B" 3.8" (95 mm) 3.8" (95 mm) "C".63" (16 mm).63" (16 mm) "D".39" ( mm).39" ( mm) Dipsticks New Part Number Obs. Part Number Description B B DIP.FB2 DIP.FB4 Pack of () x 7.9" Pack of () x 15.8" 232
4 Metal Filler Breathers Flange Type Materials: Cap & Plate: Nickel chrome plated steel Valve: Nylon/Nitrile Gasket: Cork Filtration Element: Expanded polyurethane foam, micron Operating Temperatures: -22 o F (-3 o C) to 195 o F (9 o C) Seals: Nitrile Pressurization Options: none, 5 psi (.35 bar) 3" Diameter 1.75" Diameter Ø Ø Ø Ø Ø51 3xØ Ø83 6xØ Linear Measurement= mm in Flange Type, Non-pressurized New Part No. Obs. Part No. B MB1.D11B1P 5561 MB1.D11B2P B.138. MB1.11B1P New Part (Cap s.) Obs. Part (Cap s.) CP CP1.D111P Not vailable Not vailable CP CP1.211P Micron Rtg ir Flow 2 gal./sec. (7.5 l/sec.) 2 gal./sec. (7.5 l/sec.) 1.3 gal./sec. (5 l/sec.) Description Screws 3" (76 mm) dia. (6)-#x.5 3" (76 mm) dia., w/lck lug (6)-#x " (44.5 mm) dia. (6)-#x.5 Flange Type, Pressurized New Part No. Obs. Part No. New Part (Cap s.) Obs.Part (Cap s.) Micron Rtg. ir Flow Description Screws PB MB1.D1C1B1P CP CP1.D1C11P 2 gal./sec. (7.5 l/sec.) 5 psi (.35 bar), 3" (76 mm)dia. (6)-#x.5 233
5 Metal Breathers Threaded Type Materials: Cap & Plate: Nickel chrome plated steel Valve: Nylon/Nitrile Gasket: Cork Filtration Element: Expanded polyurethane foam, micron Operating Temperatures: -22 o F (-3 o C) to 195 o F (9 o C) Seals: Nitrile Pressurization Options: none, 5 psi (.35 bar) ¾" Threaded ¼" Threaded Ø Linear Measurement= mm in /4 NPT Ø /4 NPT Threaded, Non-pressurized New Part Number Obs. Part Number SB NPT MB1.B131P SB NPT MB1.C131P Micron Rating ir Flow 1.3 gallon/sec. (5 l/sec.).7 gallon/sec. (2.5 l/sec.) Thread 3/4" NPT 1/4" NPT Description 3" (76 mm) diameter 1.75" (44.5 mm) diameter 234
6 Breathers Desiccant Type Materials: Casing: Clarified copolymer polypropylene Cap: Copolymer polypropylene Stand pipe: PVC Filtration Element: Polyester, silica gel Operating Temperatures: -2 o F (-29 o C) to 25 o F (121 o C) Seals: None Maximum llowable Operating Pressure (MOP): 5 psi (.34 bar) Particle Removal Efficiency: 98.7% (beta 3 micron 99.5% (beta 4 micron 99.9% (beta 5.3 micron Weight: 93433T 1.25 lbs. (.57 kg) each T 1.75 lbs. (.79 kg) each T 2.25 lbs. (1.2 kg) each. Features Foam Pads Isolates the removal materials from contact with heavy reservoir mist and securely holds materials in place. Silica Gel Desiccant Has the highest removal capability by volume of any adsorption method. Indicates condition by changing color. Filter Pads Specially designed filter pads remove solid particulate on upstream side and then regenerate by releasing those particles when air flow reverses direction. Lower pad removes airborne contamination and second pad protects against any migration of desiccant. ir Intakes total of eight air intakes may be exposed to allow air to freely flow in and out of the TriCeptor. Foam pad Insures filter pad is properly positioned and protects it from external damage. Molded Housing Durable shock absorbing casing provides reliable service and simple press in mounting. 235
7 Breathers Installation TriCeptor breathers are designed for simple installation on most equipment, regardless of mounting connection. Since TriCeptor breathers are disposable, the threaded connection allows for quick and easy maintenance. Several mounting adapters (shown below) are available to provide the desired mounting. The installation/replacement process consists of four easy steps: 1. Remove from protective plastic wrap. 2. Remove 1" blue cap from standpipe. 3. Remove foil label to expose the necessary amount of air intake holes. 4. Twist TriCeptor into mounting adapter. ir Flow Performance The curves below show the air flow performance of the three TriCeptor breathers. To insure the longest life possible, the initial clean pressure drop should not exceed 1.5 psid (.3 bar). PSID BR Servicing the TriCeptor breather is also very easy. When the silica gel changes color from blue to a pink, the breather is no longer active and needs to be replaced. Simply remove the unit and discard properly GPM (fluid exchange rate) PSID BR 'B' '' SCFM Liters/Second O-RING 1" THREDED CONNECTION Field dapter Flange dapter Linear Measurement= mm in Part Number (mm/in) B (mm/in) Quantity 93433T / / pcs T 26.38/ / pcs T / / pcs Field dapter pc Flange dapter pc. 236
8 Mobile Triceptor New Design in Mobile Triceptor: Parker s new mobile Triceptor desiccant filter breather incorporates a design that replaces both the spin-on can and the optional check valve adaptor. Optimized for mobile applications, the mobile Triceptor is equipped to handle high air flow surges as cylinders unload, while providing reliable protection from ingressed contaminants. Controlling rust-forming water vapor and airborn particulates, the breather protects against sludge deposits and water-contaminated oil resulting in longer oil and filter life while reducing operating costs Rugged aluminum housing. Second filter element protects against any migration of desiccant dust. Color indicating silica gel, absorbs water from incoming air. During exhalation, dry system air is passed back through the silica gel bed partially regenerating the desiccant. High performance filter element provides 1-micron filtration. Foam pad stops oil mist and ensures air is evenly disbursed through the filters and desiccant, providing maximum efficiency for backflushing and silica gel regeneration. Stainless steel standpipe. Visual indicator window. Replace breather when desiccant color changes from blue to pink. Foam pads evenly disperse incoming air over filtration and drying media. *Patented technology 237
9 Mobile Triceptor General Data mount of Silica Gel dsorption Capacity.79 kg 1 lb. 12 ox. 318 ml 1.34 cups Net Weight of Unit 1.8 kg 4 lbs. 3 oz. Filtration rea 31.1 in 2 / 79 cm 2 Direction of Flow Bidirectional Operating Temperature Range Filter Media Material -2 F to 3 F / -29 C to C EPTFE Ft./min. in. - H2O (STM D 737) Filtration Efficiency (IES-RP-CC21.1) Unit Material Data Material Nylon and MXD6 Maximum Operating Temperature 3 F / C Melting Point 32 F / 16 C Check Valve dapter Zinc Plated Steel Hygroscopic gent (Silica Gel) pparent Bulk Density 7-8 kg/m3 verage Particle Diameter.145 / 3.68 mm Specific Heat.25 BTU/lb. F Nomimal Mesh Range 4 x 8 verage Crush Strength 35 lbs. / 15.9 kg cm cm cm /2-16 UN Male Thread O-Ring 3/4 NPT Male Thread 1 1/2-16 UN Female Thread Check Valve dapter Part Number Note: Element removal clearance = 1 238
10 Breathers - Spin-on Type Materials: Low carbon steel Filtration Element: Cellulose Operating Temperatures: -4 o F (-4 o C) to 225 o F (7 o C) Seals: Nitrile. Weight: 12T lbs(.54 kg) each 5T lbs. (1. kg) each Sizing Select the proper size cannister for the maximum rate of reservoir draw down or air exchange rate. s a rule of thumb, clean pressure drop should be limited to.18 psid (5" H2O). Recommended cannister change out is after 5 hours of operation. More frequent replacement may be required when operated in heavily contaminated areas such as grinding operations, primary metal mills, and on mobile equipment. Under such conditions, increase replacement frequency to every 25 hours. Linear Measurement= mm in 12T Graphs are for 3C cannisters only. Total pressure drop across cannister, adaptor, and pipe may be found by adding pressure drops below: % for each inch of 12T adapter or 3/4" pipe used. + 3.% for each 3/4" elbow used. + 1.% for each inch of 5T adapter or 1-1/4" pipe used. + 2.% for each 1-1/4" elbow used. DIFFERENTIL PRESSURE (IN H 2 ) T 5T DIFFERENTIL PRESSURE (PSI) T 5T O - RING 1-12 UN P/N T DPTER 15.7 MINIMUM.62 REMOVL CLERNCE 3/4 NPT IR FLOW (SCFM) OIL LEVEL CHNGE RTE (GPM) Element ir Rating* Diameter daptor Kit micron 2 micron 5 micron 3.75" 3.75" 3.75" MIN CNNISTER REMOVL CLERNCE micron 5.1" micron 5.1" micron 5.1" *99% removal efficiency for particles larger than stated size in air O - RING 1½ - 16 UN DPTER 1 1/4 NPT P/N
11 Diffusers Operating Temperatures: 195 o F (9 o C) maximum Materials: Body & end cap: Zintec Head: glass-filled nylon Weight: See chart below Benefits: Installing a diffuser in a hydraulic reservoir is a simple change that can make a dramatic difference in system efficiency. With special concentric tubes designed with discharge holes 18 o opposed, fluid aeration, foaming and reservoir noise are reduced. Pump life is also extended by reducing cavitation to the pump inlet. The effects of fitting a system with a diffuser are shown below. Flow without diffuser ØB 12 PLIN RE MOUNTING THRED Flow with diffuser fitted C /F HEX 12 PLIN RE New Part Number Obs. Part Number Thread (NPT) Nominal Flow GPM (LPM) Length "" Inch (mm) Diameter "B" Inch (mm) HEX "C" Inch (mm) Weight Lbs. (kg) 225 DF1.2BP 3/4" 13 (5) 4.7 (12) 2.4 (62) 1.81 (46).6 (.27) 2251 DF1.B4BP 1" 3 (114) 5. (127) 3.4 (86) 2.17 (55).93 (.42) 2252 DF1.B6BP 1 1/2" 6 (227) 7. (178) 3.4 (86) 2.56 (65) 1.23 (.56) 2253 DF1.B9BP 2" 12 (454) 9.5 (242) 3.4 (86) 2.95 (75) 1.52 (.69) 24
12 Fluid Level/Temperature Gauges Materials: Lens: Transparent polyamide Lens base: Nylon 66 Shroud: High impact polystyrene (no aluminum content) Seals: Nitrile Maximum Operating Pressure: 14.7 psi (1 bar) Operating Temperatures: -22 o F (-3 o C) to 195 o F (9 o C) Thermometer Range: 9 o F to 2 o F (3 o C to 9 o C) Indicator: Blue alcohol Fluid Compatibility: Mineral and petroleum based fluids Mounting: Front or rear fixing, two holes (M) Length Linear Measurement= mm in Part Number Thread Length Description FL M 3 Fluid level and temperature FL M 5 Fluid level and temperature FL M Fluid level and temperature 241
13 Fluid Level/Temperature Gauges Length Length Linear Measurement= mm in 242
14 Suction Strainers Materials: Media: Stainless steel Tube and endcap: Zintec Head: glass filled nylon Filtration Element: mesh (149 micron) Operating Temperatures: 195 o F (9 o C) maximum Bypass: None, 3 psi (.2 bar) Weight: See chart below Without Bypass C /F HEX SUCTION STRINERS DIFFERENTIL PRESSURE Flow gpm PSI ØB.4.58 Differential Pressure SSI.I (bar) SS1.1 SS1.B2 SS1.B3 SS1.C SS1.C 4 SS1.C 5 SS1.C6 SS1.C6 SS1.D7 SS1.D8 SS1.D With Bypass MOUNTING THRED C /F HEX ØB Flow l/min New Part No. With Bypass Bypass Port (NPT) Nominal Flow GPM (LPM) Length Inch (mm) Diameter B Inch (mm) BSPP Fitting MOUNTING THRED No 1/2 5(19) No Yes 1/2 5(19) No No 3/4 8(3) No Yes 3/4 8(3) No No 1 (38) No Yes 1 (38) No No 1-1/2 3(114) No Yes 1-1/2 3(114) No No 1-1/2 5(189) No Yes 1-1/2 5(189) No No 2 5(189) No Yes 2 5(189) No No 2-1/2 75(284) No Yes 2-1/2 75(284) No No 3 (378) No Yes 3 (378) No 243
15 Magnetic Suction Strainers Magnetic Suction Strainers Now offer dual protection, without cavitation! Parker's new magnetic suction strainers offer dual protection to the pump inlet without risk of cavitation. Powerful ceramic magnets located parallel to the pleated mesh attract and protect against damaging ferrous particles of all sizes. The pleated stainless steel screen provides additional filtration protection for larger particles that would result in catastrophic failure. The generous open area of the stainless steel pleated mesh screen elimantes the possibility of pump cavitation. Ordering Information The information below shows the part numbers, specifications and dimensions of available suction strainers, to help you meet the needs of your specific application. NOTE: ll sizes are standard with 3 mesh screen (56 micron). Part Number NPT Connection Flow GPM (LPM) inches (mm) Dimensions B inches (mm) C inches (mm) pprox. Shipping Weight lbs. (kg) " 15 (55) 1.88 (47.75) 5.19 (131.83) 3.9 (78.49) 1.59 (.72) " 25 (95) 2.38 (6.45) 7.39 (187.71) 3.53 (89.66) 3.16 (1.43) " 35 (135) 2.38 (6.45) 7.39 (187.71) 3.53 (89.66) 2.88 (1.31) " 5 (19) 2.75 (69.85) 7.39 (187.71) 3.53 (89.66) 2.22 (1.1) " (38) * 9.35 (237.49) 4.47 (113.54) 3.91 (1.77) *Part number features a 3" half coupling, not a hex nut. Parkers magnetic suction strainers are available in sizes ranging from one to three inches. C B P (PSI) Flow Vs. Pressure Loss The rugged steel construction, combined with the generous filtration area, ensures reliable performance for suction applications Flow (GPM) 244
A Filtration Primer. Filter Elements. High Pressure Filters. Tank-Mounted, Return Line and Medium Pressure Filters. Water Service Filters
A Filtration Primer Filter Elements High Pressure Filters Tank-Mounted, Return Line and Medium Pressure Filters Water Service Filters Section 6 Reservoir Accessories SCHROEDER INDUSTRIES 259 Principles
More informationBreathers: VentGuards Basic protection from moisture and particulate contamination in lubricant and equipment
Breathers: VentGuards Basic protection from moisture and particulate contamination in lubricant and equipment Applications: Gearboxes Low-Flow High-Humidity Washdown The Overview Standard Breathers: Typical
More informationGlass-Filled Nylon and Metal Breathers IP65 Rated, Metal, Screw-on and Lockables Reservoir Equipment
Glass-Filled Nylon and Metal Breathers IP65 Rated, Metal, Screw-on and Lockables Compact and lightweight reservoir solutions IP65 Co-polymer breathers and metal breathers The IP65 rated range of moulded,
More informationBreathers: VentGuards Basic protection from moisture and particulate contamination in lubricant and equipment
Breathers: VentGuards Basic protection from moisture and particulate contamination in lubricant and equipment Des-Case Corporation 675 N. Main St. Goodlettsville, TN 37072 (615) 672-8800 Fax (615) 672-0701
More information12AT/50AT Series Spin-On Filters
1 Applications for Mobile Equipment Hydrostatic Drives Industrial Power Units Reservoir Breathers Often, economic conditions dictate what type of filter is used on a piece of equipment. When costs are
More information12AT/50AT Series. Spin-On Filters. Global Filtration Technology
1AT/5AT Series Spin-On Filters Global Filtration Technology 1 1AT/5AT Series Applications for Spin-On Filters n Mobile Equipment n Hydrostatic Drives n Industrial Power Units n Reservoir Breathers Often,
More informationAN INNOVATIVE GREEN FILTER FEATURING
Co-Polymer and Steel Reservoirs Hydraulic Reservoir Solutions Tailormade solutions for reservoirs Supporting hydraulic system designers with reservoir solutions N INNOVTIVE GREEN FILTER FETURING LEIF LEIF
More informationThreaded Adapters for Creating Tank Breathers. Element Attachment. Thread. O-Ring (Buna-N) Aluminum Construction. Male Pipe.
Reservoir Breathers Breathers are available in a variety of styles, materials and sizes. Breathers provide clean airflow into reservoirs and other storage containers where there is an exchange of air during
More informationPT Series Tank Top Filters
Tank Top Filters 9 Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions. Build global confidence. Redefine new limits.
More informationHYDRAULIC. Coreless Medium Pressure Filters 12CS/50CS Series. Typical Applications. Features:
Coreless Medium Pressure Filters 12CS/50CS Series Typical Applications Mobile Ag Mobile Construction Material Handlers Aerial Lifts Pilot Lines Charge Pump Hydrostatic Drives Industrial Power Units Machine
More informationFILTERS. Accessories. CFA - Filling plugs. CBA-CBB - Air breathers. CSF - Filling plugs with threaded air filter. CLA - Visual level indicators
ccessories F - Filling plugs B-BB - ir breathers SF - Filling plugs with threaded air filter L - Visual level indicators IR SENTRY - ir dry filters breathers F FILLING BRETHERS Filling plugs with inbuilt
More informationRF4 Series. Return Line Filters
RF Series Return Line Filters 7 RF Series Applications for RF Filters Mobile Equipment Mining Equipment Industrial Power Units Automotive Specified Equipment The RF is a rugged, industry proven filter
More informationMOISTURE MEETS ITS MATCH
Donaldson Delivers T.R.A.P. Breather Technology For Hydraulic and Lube Oil Reservoirs MOISTURE MEETS ITS MATCH Donaldson T.R.A.P. breathers collect and expel the moisture out of reservoirs, which means
More informationDistributed by. Keeping contamination under control. I
TM Distributed by Keeping contamination under control. I TM Pioneers in contamination control. Why do the world s leading companies, distributors, and OEMs look to Des-Case? Because we understand the importance
More informationInstallation of Des-Case breathers at critical ingression points is a cost-effective
Disposable Breathers Installation of Des-Case breathers at critical ingression points is a cost-effective means to prevent contaminants from entering the fluid reservoirs as differential pressures occur.
More informationSCHROEDER INDUSTRIES 335. Section 9:
SCHROEDER INDUSTRIES 335 Section 9: Section 9 Reservoir Accessories Reservoir Accessories Page 337 SAE Weld Flanges 353 Suction Separators and Strainers 353 Oil Sight Glasses 355 Schroeder Reservoir Accessories
More informationIndex: ** Managing Machine Reliability ** How do Air Breathers work The benefits of Air Sentry Desiccant Breathers Air Sentry Z-Series Breathers
Air Sentry Desiccant Breathers Extending fluid life saves money and downtime Index: How do Air Breathers work The benefits of Air Sentry Desiccant Breathers Air Sentry D-Series Breathers Air Sentry M-Series
More information12CS Series. Coreless Spin-on Filter Max. 75 l/min - 35 bar. Environmentally friendly alternative for spin-in filtration.
12CS Series Coreless Spin-on Filter Max. 7 l/min - 3 bar Environmentally friendly alternative for spin-in filtration Lightweight, non-metallic element that can be incinerated The 12CS Series features a
More information12CS/50CS Series. Coreless Spin-on Filters
12CS/5CS Series Coreless Spin-on Filters 65 12CS/5CS Series Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
More informationAccessories. magnaloy coupling company P.O. Box 455 Alpena, MI INDEX: Filler Breather Adapters...3
Accessories INDEX: Magnaloy General Information... What You Should Know About Filler Breathers... Filler Breather Adapters... Filler Breathers...4 Filler Breather Cap Types...4 Mounting Flanges...4 Screen
More informationLow Pressure Filters. Low Pressure Filters LOW PRESSURE FILTERS
Low Pressure Filters Low pressure filters are the most common type of filter found in hydraulic circuits used most often in return line applications. Low Pressure Filters Donaldson low pressure filters
More informationKLT and KLS Series Tank Top Return Line Filters
KLT and KLS Series Tank Top Return Line Filters 23 KLT/KLS Series Tank Top Return Line Filters Applications for KLT and KLS Filters Mobile Equipment Construction, Refuse Industrial Power Units Machine
More informationPHONE: 937/ FAX:
Magnetic Tank Cleaners Multi Magnet Standard or Heavy Duty Lenz magnetic tank cleaners pick up material that ordinary filters miss and thus maintain cleaner oil. The cleaner the oil; the less problems
More informationField Engineering Bulletin
Field Engineering Bulletin Bulletin No. 40.20.58 SundGard Desiccant Breathers EFFECTIVE DATE: NOVEMBER 2014 REV: ORIG AFFECTED MODELS: LMX-31X, 33X, 34X PAGE 1 OF 8 Note: Not applicable for ATEX zone 1
More informationOVERVIEW OF RESERVOIR ACCESSORIES
OVERVIEW OF RESERVOIR ACCESSORIES Reservoir Accessories The reservoir of a hydraulic system can be a significant source of contamination. At the same time, the reservoir is an ideal location for correcting
More informationBreathers. BF...3 & BF...4 Series INNOVATIVE FLUID POWER. ø D1 HEX. Specifications. Hydraulic Symbols. Model Code. Dimensions BF P 3 G 10 W 1.0 /.
BF...3 & BF...4 Series Maximum flow rate - 31 scfm / 230 gpm at 0.04 bar Epoxy coated steel cap Zinc-plated internals Threaded connection Pressurized breather with relief valve (optional - BF3 only) Phenolic
More informationCUSTOM CLAMPS. Head Bolt Arrangements. Model Code B3-5 A1 B1 A1HB B1HB S1 HRSGBLPU 30 A1 373 ST
Head Bolt Arrangements CUSTOM CLAMPS A1 B1 A1HB B1HB S1 Parts Legend 1 Hex Head Bolt 2 Socket Head Bolt 3 Steel Band 4 Band Profile 5 Swivel Sleeve 6 Hex Head Nut 7 H-Bolt 8 Locking Sleeve Series HRGBLPU
More informationModuflow. ILP and RFP Low Pressure Filters. Series
Moduflow ILP and RFP Low Pressure Filters Series 27 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile
More informationaccessories Hydroline Filters and Accessories hydroline filters & 14 hydroline filters & accessories Filters Inline Spin on
hydroline filters & accessories Hydroline Filters and Accessories hydroline filters & accessories Prices Sec:2 Suction Strainer Sec:4 Filters Inline Spin on Sec:5 Filter Tank Top Sec:9 Gauge Indicators
More informationOIL FILLER AND AIR BREATHER FILLER CAPS
OIL FILLER ND IR RETHER FILLER CPS The complete series of oil filter and makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. s perform
More informationhydroline filters and accessories
hydroline filters and accessories 12 Hydroline Filters and Accessories SECTION 12 Prices Suction Strainer Filters Inline Spin on Filter Tank Immersed Gauge Indicators Level Gauge Sight Level Gauge Threaded
More informationSPIN-ON FILTERS & ELEMENTS
ABSOLUTE RATED (BETA SPIN ) & NOMINAL RATED SPIN-ON FILTERS & ELEMENTS Single and Twin Element Models Pressures to 20 psi Flows to 120 gpm APPLICATION HYDAC Spin-On Filters are for filtration of hydraulic
More informationFCL Filter Cart Flow rate up to 22 gpm (82 lpm)
click here to return to website FCL Filter Cart Flow rate up to 22 gpm (82 lpm) Ideal for high viscosity Lubrication and hydraulic oils (ISOVG22 ~ ISOVG320) Filter new fluids during transfer and replenishment
More information12CS/50CS Series Coreless Medium Pressure Filters
12CS/5CS Series Coreless Medium Pressure Filters 65 12CS/5CS Series Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
More information[You may download this article at: https://fluidsys.org/downloads/ ]
Fluidsys Training Centre, Bangalore offers an extensive range of skill-based and industry-relevant courses in the field of Pneumatics and Hydraulics. For more details, please visit the website: https://fluidsys.org
More informationLow Pressure Filters
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight
More informationModuflow Series IL2/RF2/CF2 Low Pressure Filters
IL/RF/CF Low Pressure Filters 35 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile filter available
More informationLow Pressure Medium Pressure High Pressure Accessories Off-line Filtration
Front Donaldson Cover DeliversHeadline Should HYDRAULIC Be Centered SERVICE PARTS & In ACCESSORIES This Color Box GUIDE Low Pressure Medium Pressure High Pressure Accessories Off-line Filtration Donaldson
More information15/40/80CN Series. Medium Pressure Filters
//8CN Series Medium Pressure Filters 7 //8CN Series Applications for CN series Filters Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard) Hydrostatic Drive Charge Pumps Mobile
More information12AT/50AT Series Spin-On Filters
12AT/5AT Series Spin-On Filters Applications for Spin-On Filters Mobile Equipment Hydrostatic Drives Industrial Power Units Reservoir Breathers Often, economic conditions dictate what type of filter is
More informationGlass-Filled Nylon and Metal Breathers IP65 Rated, Metal, Screw-on and Lockables
Glass-Filled Nylon and Metal Breathers IP65 Rated, Metal, Screw-on and Lockables 83 Reservoir equipment IP65 Rated Filler Breathers Specification for Single and 6Hole Installation Option Construction:
More informationPictorial Index Hydraulic Filters
Hydraulic Filters Reservoir Accessories Pictorial Index Hydraulic Filters RIF-10 INLINE SPIN-ON FILTERS 1.1/4 S PAGES 356-357 PAGES 360-361 RTI AND RFI TANK TOP FILTERS PAGES 366-367 S: 1.1/4 BSPP MAX.
More informationFLUID HANDLING: Drum Filter Cart
FLUID HANDLING: Drum Filter Cart This cart is ideal for pre-cleaning, protecting, and transferring oil from a conveniently attachable, secured drum. A drum adapter kit with a desiccant breather is included
More informationFLUID HANDLING: Drum Filter Cart
FLUID HANDLING: Drum Filter Cart This cart is ideal for pre-cleaning, protecting, and transferring oil from a conveniently attachable, secured drum. A drum adapter kit with a desiccant breather is included
More informationPortable Filter Carts Models 5MF and 10MF
s Models 5MF and 10MF 161 Applications for Parker Filter Carts Filtering new fluid before putting into service Transferring fluid from drums or storage tanks to system reservoirs Conditioning fluid that
More informationAccessories. Service, In-Line and Reservoir. Accessories ACCESSORIES
Accessories Donaldson offers an extensive line of accessories for hydraulic circuits, lines and reservoirs that will help you maintain proper ISO cleanliness levels. Accessories Service, In-Line and Reservoir
More informationTTF Series MAX 500 I/min - 10 bar
MX 5 I/min - bar N INNOVTIVE GREEN FILTER FETURING LEIF LEIF Low pressure filters Features & enefits Features bar rated filter Cast aluminium head LEIF elements Magnetic pre-filtration In-to-Out filtration
More information12CS Series Coreless Spin-on Filter Max. 75 l/min - 35 bar
Coreless Spin-on Filter Max. 75 l/min - 35 bar Environmentally friendly alternative for spin-in filtration Lightweight, non-metallic element that can be incinerated The features a Parker, re-usable coreless
More informationAccessories. Service, In-Line and Reservoir. Accessories ACCESSORIES
Accessories Donaldson offers an extensive line of accessories for hydraulic circuits, lines and reservoirs that will help you maintain proper ISO cleanliness levels. Accessories Service, In-Line and Reservoir
More informationOil Conditioning Unit
66 Applications The Parker Oil Conditioning Units (OCU) are a family of off-line filtration packages designed to effectively remove water or particulate contamination from hydraulic and lube system fluids.
More informationStauff Hydraulic Accessories
Hydraulic & Offshore Supplies Stauff Hydraulic Accessories YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE Contents STAUFF Hydraulic Accessories
More informationHY-PRO FILTRATION. FSL Filter Unit Flow rate up to 22 gpm (83 lpm)
FSL HY-PRO FILTRATION Materials of Construction Assembly Frame: Painted Steel Drip Pan: Painted Steel Filter Assembly: Epoxy coated steel 25 or 50 psid bypass available True differential pressure indicator
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Features MF Filters are manufactured with an aluminum head. MF, MFD, MFDS Series Spin-On Filters Choice of NPT, SAE straight thread O-ring boss, BSPP, and SAE 4-bolt flange porting to allow easy installation
More informationFluid Power Accessories
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 PNEUMATIC EXHAUST MUFFLERS Breather Vents 2,3 Exhaust Mufflers 2-5 Reclassifiers / Mufflers 6,7 BREATHER VENTS Speed
More informationLF/LFM - Low Pressure High Flow Assemblies LF flow rate to 560 lpm, 150 gpm / LFM flow rate to lpm, 4500 gpm.
HY-PRO FILTRATION LF/LFM - Low Pressure High Flow Assemblies LF flow rate to 560 lpm, 150 gpm / LFM flow rate to 16875 lpm, 4500 gpm Features, Benefits, Advantages Carbon steel construction standard (304
More informationAIR PREPARATION PRODUCTS. Table of Contents
AIR PREPARATION PRODUCTS Table of Contents Page Air Filters................................................. 5-7 Oil Removal Filters......................................... 8-9 Regulators..............................................
More informationMedium Pressure Filters
Medium Pressure Filters Medium pressure filters can be used in applications up to psi (379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters Donaldson Duramax
More information15P/30P Series High Pressure Filters
1P/P Series High Pressure Filters 124 1P/P Series Applications Saw mills Aircraft ground support equipment Asphalt pavers Hydraulic fan drives Power steering circuits Waste trucks Cement trucks Servo control
More informationIFP S.A.E. 4 BOLT FLANGE FITTINGS
3¼ 4 5 IFP S.A.E. 4 BOLT FLANGE FITTINGS 2-214 2-218 2-222 2-225 2-228 2-232 2-237 Supplied complete with mounting hardware (O-ring, Socket Head Cap Screw & Hi- Collar Lock Washer ) J 1.2 IFP FILLER /
More information74 Series Combination Filter/Regulator and Lubricator Unit, featuring an in-line shut-off valve, and Quikclamp system.
NCA-33 January 1998 Supersedes November 199 EXCELON Series System Features...2 EXCELON Series Product Features... Filters F72G General Purpose Filters... F73G General Purpose Filters...8 F7G General Purpose
More informationHIGH PERFORMANCE FILTERS INDUSTRIAL HYDRAULIC AND LUBRICATION APPLICATIONS
HIGH PERFORMANCE FILTERS INDUSTRIAL HYDRAULIC AND LUBRICATION APPLICATIONS Microfil III media are made from micro-fine glass fibers which are randomly laid into a multilayered web. The media are impregnated
More informationFILTERS, STRAINERS AND VALVES PRODUCT GUIDE
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL
More information15/40/80CN Series Coreless Medium Pressure Filters
//8CN Series Coreless Medium Pressure Filters 89 //8CN Series Applications Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard) Hydrostatic Drive Charge Pumps Mobile Equipment
More informationRosedale Model HSS300 and HSS750 Single Cartridge Housings for Liquids
H S S S I N G L E C A R T R I D G E H O U S I N G S Rosedale Model HSS0 and HSS750 Single Cartridge Housings for Liquids Precision Machined Knife-Edge Seal The Rosedale Model HSS single element filter
More informationMPD Series. Medium Pressure Duplex
Medium Pressure Duplex 81 Applications of MPD Circulating Lube Oil Systems Power Generation Control Systems Steel Mill Control Systems Pulp & Paper Control Systems Test Stands Automotive Stamping Presses
More informationPT Series. Tank Top Filters
9 PT Series Disposable Filter Cartridge The new PT series filter is available in two diameters and three lengths for flow ranges from 5-50 gpm. The PT2 and PT4 filter cartridges utilize Microglass III
More informationHIGH PRESSURE SPRAY GUNS &ACCESSORIES
HIGH PRESSURE SPRAY GUNS &ACCESSORIES Max. PSI: 4000 PSI Max. GPM: 10 GPM Weight 18 oz. TEEJET PW4000 Built in hose swivel Max. PSI: 4000 PSI Max. GPM: 10 GPM Weight 18 oz. TEEJET PW4000 Max. PSI: 4000
More informationMedium Pressure Filters. 130 Eco Series. MAX 1000 I/min - 30 bar FEATURING. Medium pressure filters
13 Eco eries MX 1 I/min 3 bar FETURING 87 Medium pressure filters 13 Eco eries Features & Benefits Features Modular filter system Duplex type systems with selecting valve Bypass assembly in the filter
More informationBGT Series. Low Pressure Filters
Low Pressure Filters 60 Applications - Flows to 640 GPM - 3 Micron Absolute to 120 Micron Absolute - Disposable or Recleanable Elements - Visual and Electrical Indicators - Microglass elements - Magnetic
More informationGEORGIAN EQUIPMENT LTD.
GEORGIAN EQUIPMENT LTD. A COMPREHENSIVE SELECTION OF HIGH QUALITY HYDRAULIC PRODUCTS For more information 705-325-3431 E Electric Motor Pump Adaptors - PAE Series 5 F Filler Breathers - FB Series 15 Filter
More informationFILTER ELEMENTS. Overview of Elements PN# / / FIL
Overview of Elements C1 Overview of Elements Optimicron Elements ON - code designation Glass fiber, multi-layered with support Collapse rating - 29 psid (2 bar) 1, 3, 5, 1, 15, 2 micron Filtration Rating
More informationMPD Series. Medium Pressure Duplex
Medium Pressure Duplex 89 Applications of MPD Circulating Lube Oil Systems Power Generation Control Systems Steel Mill Control Systems Pulp & Paper Control Systems Test Stands Automotive Stamping Presses
More informationVacuum Accessories. Pneumatic. Section E. Pneumatic. Parker Hannifin Corporation Pneumatic Division Richland, Michigan
Vacuum Accessories Section E E 1 Notes 2 Index Contents Convum Filters... 4-5 Convum Silencers... 6 Silencer (Flow Thru)... 7 ASN Series Air Line Mufflers... 8 E 3 (Revised 10/13/04) Ordering Information
More informationBulk Liquid Filtration
Low Pressure, High Flow Filters Duramax Spin-On Filters Manifolds Breathers, Water Seperators Gauges, Valves, Test Points, more www.donaldson.com Brochure No. IH00501 Rev 4/05 Why install filtration on
More informationPortable Hydraulic Filtration Systems. Guardian. MAX 15 I/min - 2 bar. Portable filtration systems
Portable Hydraulic Filtration Systems Guardian MAX 5 I/min - 2 bar 37 Portable filtration systems Portable Hydraulic Filtration Systems Guardian Features & Benefits Features Portable and robust design
More informationJ Series Filters HIGH PRESSURE FILTERS. J88 Mini In-Line (Replaceable Filter) J85 Tee-Type. J82 Mini In-Line. J83 In-Line
J Series Filters HIGH PRESSURE FILTERS J Series Filters provide filtration of particulates in gas and liquid systems prior to pressure or flow control components. J Series Filters utilize a pleated, 0
More informationHIGH PRESSURE FILTERS
HIGH PRESSURE FILTERS Series DF & LF Pressures to 6 PSI Flows to 18 GPM APPLICATION HYDAC DF & LF In-line High Pressure Filters are designed for use on hydraulic power units, machine tools, plastics machinery,
More informationHIGH PRESSURE FILTERS Series HF2P
HIGH PRESSURE FILTERS Series HF2P Pressures to 3000 psi Flows to 25 GPM Port Size 3/4 APPLICATION HYDAC HF2 Inline High- Pressure Filters are designed for use on hydraulic power units, machine tools, plastics,
More informationFLUID POWER GROUP PRODUCT CATALOG / MARADYNE.COM
FLUID POWER GROUP PRODUCT CATALOG 800-537-7444 / MARADYNE.COM CAPABILITIES Filter Manufacturing Assembly Complex Manufacturing Injection & Roto Molding Electric Motors & Fans ISO 5011 Air Filter Lab PRODUCTS
More informationMPD Series Medium Pressure Filters
Medium Pressure Filters 113 Applications - Circulating Lube Oil Systems - Power Generation Control Systems - Steel Mill Control Systems - Pulp & Paper Control Systems - Test Stands - Automotive Stamping
More informationLF(M) High Viscosity Filter Assemblies. hyprofiltration.com/lf
LF(M) High Viscosity Filter Assemblies Low pressure filter assemblies optimized for high flow hydraulic, high viscosity lube and heavily contaminated fuel applications. Max Operating Pressure: 150 psi
More informationATZ 300 (2 1 /2 SAE FLANGE) Empty Housing Flow (US GPM) p (PSID) p (bar)
Pressure Drop Curves The recommended level of the initial pressure drop for suction filters is.3 bar. If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated
More informationETF Series. Tanktop Mounted Return Line Filters max. 175 I/min - 6 bar. An economic return line filter. Product Features: Contact Information:
max. 75 I/min - 6 bar An economic return line filter Improved system protection The ETF Series utilizes a re-inforced co-polymer head equipped with 2 return ports and quick-release cover. Maximum pressure
More information12CS Series. Coreless Spin-on Filter Max. 75 l/min - 35 bar. Environmentally friendly alternative for spin-on filtration.
Coreless Spin-on Filter Max. 75 l/min - 35 bar Environmentally friendly alternative for spin-on filtration Lightweight, non-metallic element that can be incinerated The features a Parker, replaceable coreless
More informationLOW PRESSURE FILTERS RF Series In-tank / Inline Filters 360 psi up to 400 gpm
LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 36 psi up to 4 gpm Hydraulic Symbol A D2 Features RF 3 filters are constructed of polyamide plastic. RF 6-33 filters are constructed of aluminum
More informationLOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 224 gpm
LOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 4 gpm Technical Specifications Mounting Method 75/9/15/165/185 mounting holes - filter housing D5 Features The compact and lightweight
More informationDimensional Detail LABA-8-8 CP /2" IN MM (733) LGB-8-03
LGB Air Breathers Threaded / Bayonet Flange Model LGB White metal filter canister Zinc plated steel adapter Air flow to 200 CFM (1125 GPM) Compatible with most fluids Temperature to 250 F (121 C) 1/2",
More informationMB SERIES SMB SERIES MINIATURE TANK BREATHERS MINIATURE TANK BREATHERS ACCCESSORIES. Phone (608) Fax (608)
G1 MB SERIES MINIATURE TANK BREATHERS 10 Micron Filtration (Nominal) Shatter Resistant Plastic Construction Temperatures Up to +225 F Model A B Number Thread Size Overall Height MB-02-10 1/4 NPT 1.8 MB-03-10
More informationFluid Handling Products. Fluid Handling a proactive approach to contamination control. Portable Filtration. Dedicated Filtration
Fluid Handling Products Fluid Handling a proactive approach to contamination control Actively filtering lubricants can dramatically improve industrial equipment performance, preventing production downtime
More informationValves. E Valves. Multiple Hydraulic System Applications
s Multiple Hydraulic System Applications Parker Check s are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage caused by fluid back pressure. Offered
More informationVacuum Filters. Catalogue Edition 2
Vacuum Filters Catalogue Edition 2 INLINE VACUUM FILTERS Vacuforce plastic in-line filters provide easy monitoring, economy and safety. These shatterproof filters are 100% airtight, can withstand high
More informationDynaswivel. Air Line Connectors. Ball-Swivel Plug. Never Fight an Air Tool Again! For Use with Most Air Tools THE PROBLEM THE SOLUTION
Dynaswivel Air Connectors Never Fight an Air Tool Again! For Use with Most Air Tools THE PROBLEM Aluminum and Stainless Steel Construction Single Pivot Right angle single-pivot swivels 360 at one location.
More informationLOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with an aluminum head. Choice
More informationLOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with
More informationCAUTION: NOT INTENDED FOR STREET USE HOW TO USE THIS CATALOG WE LOVE RACING
WE LOVE RACING When WIX Filters began making its performancedriven products in 1939, the first Daytona race was still 20 years down the road. In developing the WIX Racing line, WIX engineers have worked
More informationPerformance Information Series PVP 100/140 Pressure Compensated, Variable Volume, Piston Pumps
Catalog HY13-155-2/US Technical Information Series PVP 1/14 Performance Information Series PVP 1/14 Compensated, Variable Volume, Piston Pumps Features High Strength Cast-Iron Housing for Reliability and
More informationTTF/BGTS Series. Return In-Tank Filters. Global Filtration Technology
Return In-Tank Filters Global Filtration Technology 25 Features/Applications for Tank Top Return Flow Filters Flows to 640 GPM 3 Micron Absolute to 120 Micron Absolute Disposable or Recleanable Elements
More informationLevel indicators, screw plugs
Level indicators, screw plugs 885 Product overview Level indicators, screw plugs Oil level gauges K0443 Plastic plugs K0452 Oil level gauges K0444 Page 888 Aluminium plugs K0453 Page 894 Oil level sight
More informationBALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
More informationProduct Information Filters for Process Gases
Fine Filtration Systems for Industry Product Information Filters for Process Gases Tel: +44(0)1622 718927 Email: info@headlinefilters.com Fax: +44(0)1622 882448 Website: www.headlinefilters.com Stainless
More information