Dimensions / Technical Data / Order Codes
|
|
- Anne Day
- 5 years ago
- Views:
Transcription
1 Fluid Level / Temperature Indicators / / rder odes Level Gauge SN D Design of Scale Plates Thermometer ptions apillary Tube Thermometer with a dual elsius / Fahrenheit scale up to +80 / +80 F L3 YUR LG F Dial Thermometer with Probe T/T2 (optional) F learance Hole: Ø3 (Ø.5) for / Ø0,5 (Ø.4) for M0 / Ø3,5 (Ø.53) for UN, UNF and UNF S N X S - T Maximum admissible tolerance for the bolt center spacing (dimension ) according to DIN IS 2768-f: ±0,20mm /.008in for all nominal sizes. maximum tank pressures not exceeding 2 bar / 29 PSI 6 nominal sizes from 76 mm / 2.99in to 305mm / 2.00in Display either undivided (SN ) or subdivided by strut(s) into 2 (SN 254) or 3 sections (SN 305) Please see page 5 for alternative nominal sizes and designs. Media ompatibility Suitable for use with Mineral and Petroleum based Housing made of Steel St 2, black epoxy-coated Sight tube and plugs made of Polyamide (P) Sealings made of NR (una-n ) Scale plate made of PV Nominal Size SN 076 SN 27 SN 50 SN 76 SN 254 SN 305 rder odes ( mm /in) (Max.) D F (with T) F (with T2) L , ,5 65,5 265, , ,5 65,5 265, , ,5 65,5 265, , ,5 65,5 265, , ,5 65,5 265, , ,5 65,5 265, SN 27 - S Special sight tube materials for improved UV or chemical resistance and use with special media (such as bio-degradable as well as special sealing materials, e.g. FPM (Viton ), and scale plate materials, e.g. luminium, are available on request. Please see page 5 for alternative housing materials. IP 65 protection rating: Dust tight and protected against water jets (IP 67 on request) perating temperature range: / -22 F F Recommended tightening torque: 8 N m / 5.9 ft lb ccessories / ptions Red / blue capillary tube thermometers with a dual elsius / Fahrenheit scale and a temperature display range of up to +80 / +80 F Dial thermometers with probe and a elsius or a dual elsius / Fahrenheit scale with a temperature display range of up to +00 / +22 F Thermo Switches Temperature Sensors Please see pages 8 and 9 for details. SN Nominal Size SN 076 (nominal size of 76 mm / 2.99in) 076 SN 27 (nominal size of 27 mm / 5.00 in) 27 SN 50 (nominal size of 50 mm / 5.9in) 50 SN 76 (nominal size of 76 mm / 6.93in) 76 SN 254 (nominal size of 254 mm / 0.00 in) 254 SN 305 (nominal size of 305 mm / 2.00 in) 305 Please see page 5 for alternative nominal sizes. Sealing Material NR (una-n ) (standard option) FPM (Viton ) Design of Scale Plate With STUFF logo (standard option) Neutral design without any logo ustom-designed scale plate (please specify) Thermometer ption Supplied without thermometer Red apillary Tube thermometer on scale plate T lue apillary Tube thermometer on scale plate T and a elsius scale up to 00 T and a elsius scale up to 00 T2 and a dual scale up to 00 / 22 F TF T2F and a dual scale up to 00 / 22 F V S N X anjo olt Size Metric IS thread (standard option) 2 Metric IS thread M0 0 thread /2 3 UN U thread /2 20 UNF (special option) U2 thread /2 28 UNF (special option) U3 Thermo Switch / Temperature Sensor ption Supplied without Thermo Switch / Temperature Sensor - Thermo Switch TS-SN/SNK; reak contact (normally closed); quipped with standard connector Thermo Switch TS-SN/SNK; reak contact (normally closed); quipped with connector D Thermo Switch TS-SN/SNK; Make contact (normally open); quipped with standard connector Thermo Switch TS-SN/SNK; Make contact (normally open); quipped with connector D Temperature Sensor ; quipped with connector PT00 Thermo Switches / Temperature Sensors only available for banjo bolt size. Please see pages 8 and 9 for details. Switching Temperature ontact switches at +60 / +40 F 60 ontact switches at +70 / +58 F 70 ontact switches at +80 / +76 F 80 ontact switches at +90 / +94 F 90 nly to be indicated when using a Thermo Switch. ptions T/TF and T2/T2 F are not available for banjo bolt size M0 and not be used in conjunction with Thermo Switches or Temperature Sensors. Please see page 8 for details. 4
2 Special ptions: / Inquiry hecklist Fluid Level / Temperature Indicators maximum tank pressures not exceeding 2 bar / 29 PSI; ideal for custom applications in terms of reservoir capacities and dimensions Nominal Sizes Special sizes beyond the normal of 305 mm / 2 in up to a maximum nominal size of 950 mm / 37.4 in even for small and medium quantities High-precision manufacturing within mm tolerance to customer requirements Design Robust design thanks to one or more struts that subdivide the display into 2 or more sections Positioning of the strut(s) based on engineering considerations and/or according to particular customer requirements of scale plates (only available for nominal sizes smaller than 670 mm / 26.4 in) or by use of a for nominal sizes larger than 670 mm / 26.4 in) Plastic dampening clips to reduce vibration of the sight tube are used for nominal sizes larger than 450 mm / 7.7 in Inquiry hecklist Housing made of Steel, luminium or Stainless Steel Sight tube and plugs made of Polyamide (P) Sealings made of NR (una-n ) Scale plate made of PV Floating element made of Polyamide (P) Special sight tube materials for improved UV or chemical resistance and use with special media (such as bio-degradable as well as special sealing materials, e.g. FPM (Viton ), and scale plate materials, e.g. luminium, are available on request. Please also ask for our special low-temperature versions, suitable for extreme temperatures up to -40 / -40 F. ccessories / ptions apillary tube thermometers with a dual elsius / Fahrenheit scale and a temperature display range of up to +80 / +80 F Dial thermometers with probe and a elsius or a dual elsius / Fahrenheit scale with a temperature display range of up to +00 / +22 F Thermo switches Temperature sensors Please see pages 8 and 9 for details. Level Gauge (Special ptions) SN In case that you require a special property or custom-designed level gauge, please use this checklist to provide us Nominal Size Housing Material Housing Design olt centre distance (in mm) luminium Steel Stainless Steel Regular housing design with positioning of strut(s) based on engineering considerations Please provide additional details / drawing for custom housing designs. anjo olt Size anjo olt Material Sealing Material M0 /2 3 UN /2 20 UNF /2 28 UNF Steel Stainless Steel NR (una-n ) FPM (Viton ) PDM Hydraulic ccessories Level Indication Scale plate (only for nominal sizes smaller than 670 mm / 26.4 in) Scale plate made of PV Scale plate made of luminium With STUFF logo Neutral design without any logo ustom-design (please specify) Without thermometer on scale plate apillary tube thermometer with dual elsius / Fahrenheit scale up to +80 / +80 F Floating element (recommended option for nominal sizes larger than 670 mm / 26.4in) ptions Dial thermometer with probe elsius scale up to +00 Dual scale up to +00 / +22 F Length of probe: 200 mm / 7.87 in Length of probe: 300 mm /.8 in Thermo Switch TS-SN/SNK reak contact; Standard connector reak contact; onnector Make contact; Standard connector Make contact; onnector ontact switches at +60 / +40 F ontact switches at +70 / +58 F ontact switches at +80 / +76 F ontact switches at +90 / +94 F Temperature Sensor 5
3 Fluid Level / Temperature Indicators / / rder odes Level Gauge SNK D onnection Details and lectrical Functions Types and : Industrial standard connector (contact gap: mm /.43in), similar to DIN N / IS 6952 Type Type 33 (.30) 28 (.0) PG9 ~50 (~.97) onnection 3 not engaged SNK- SNK- Dial Thermometer with Probe T/T2 (optional) learance Hole: Ø3 (Ø.5) for / Ø0,5 (Ø.4) for M0 / Ø3,5 (Ø.53) for UN, UNF, UNF ontact Level L3 25 (.98) ontacts close drops below contact level ontacts open drops below contact level Types D and D: Five-pin circular connector, -coded, according to I F 2 onnection not available 28 onnection 2 not engaged (.0) ~55 (~2.7) Table shows dimension for the version with industrial standard connector (types and ) only. Maximum admissible tolerance for the bolt center spacing (dimension ) according to DIN IS 2768-f: ±0,20mm /.008in for all nominal sizes. nalog Signal 24 V D 0 V D with maximum tank pressures not exceeding bar / 4.5PSI 5 nominal sizes from 27 mm / 5.00 in to 305 mm / 2.00 in Display either undivided (SNK ) or subdivided by strut(s) into 2 (SNK 254) or 3 sections (SNK 305) Media ompatibility Suitable for use with Mineral and Petroleum based Housing made of luminium, plastic coated Sight tube and plugs made of Polyamide (P) Float made of Polyamide (P) Sealings made of FPM (Viton ) Nominal Size SNK 27 SNK 50 SNK 76 SNK 254 SNK 305 rder odes ( mm /in) 2 (Max.) D F (with T) F (with T2) L ,5 ~ , 5,5 57,5 257, ~ ~ ~ ,5 ~ , 5,5 57,5 257, ~ ~ ~ ,5 ~ , 5,5 57,5 257, ~ ~ ~ ,5 ~ , 5,5 57,5 257, ~ ~ ~ ,5 ~ , 5,5 57,5 257, ~ ~ ~2.36 SNK 27 V Special sight tube materials for improved UV or chemical resistance and use with special media (such as bio-degradable as well as special sealing materials are available on request. contact level within 60mm / 2.36in of lower banjo bolt vailable as a break contact (normally closed) or make contact (normally open) ither equipped with industrial standard connector (types Direction of the electrical contact box (right / left) can be chosen when assembling the electrical contacts (types / D) or is right by default (types D / D) ontact ratings: max. 0 W (types / D) or 5 W (types / D) Switching voltage: max. 50 V /D Switching current: max. 0,25 IP 65 protection rating: Dust tight and protected against water jets (IP 67 on request) perating temperature range: / -22 F F Recommended tightening torque: 8 N m / 5.9 ft lb Minimum lateral distance to other magnetic components and cables: 0 mm /.39 in ccessories / ptions Dial thermometers with probe and a elsius or a dual elsius / Fahrenheit scale with a temperature display range of up to +00 / +22 F Thermo Switches Temperature Sensors Please see pages 8 and 9 for details. 6 Level Gauge with visual / electrical SNK Nominal Size SNK 27 (nominal size of 27 mm / 5.00 in) 27 SNK 50 (nominal size of 50 mm / 5.9in) 50 SNK 76 (nominal size of 76 mm / 6.93in) 76 SNK 254 (nominal size of 254 mm / 0.00 in) 254 SNK 305 (nominal size of 305 mm / 2.00 in) 305 onsult STUFF for alternative nominal sizes and designs. Sealing Material FPM (Viton ) lectrical Function reak contact, opens at contact level (normally closed); quipped with standard connector reak contact, opens at contact level (normally closed); quipped with connector Make contact, closes at contact level (normally open); quipped with standard connector Make contact, closes at contact level (normally open); quipped with connector Thermometer ption Supplied without thermometer and a elsius scale up to 00 T and a elsius scale up to 00 T2 and a dual scale up to 00 / 22 F TF T2F and a dual scale up to 00 / 22 F V D D anjo olt Size Metric IS thread (standard option) 2 Metric IS thread M0 0 thread /2 3 UN U thread /2 20 UNF (special option) U2 thread /2 28 UNF (special option) U3 Thermo Switch / Temperature Sensor ption Supplied without Thermo Switch / Temperature Sensor - Thermo Switch TS-SN/SNK; reak contact (normally closed); quipped with standard connector Thermo Switch TS-SN/SNK; reak contact (normally closed); quipped with connector D Thermo Switch TS-SN/SNK; Make contact (normally open); quipped with standard connector Thermo Switch TS-SN/SNK; Make contact (normally open); quipped with connector D Temperature Sensor ; quipped with connector PT00 Thermo Switches / Temperature Sensors only available for banjo bolt size. Please see pages 8 and 9 for details. Switching Temperature ontact switches at +60 / +40 F 60 ontact switches at +70 / +58 F 70 ontact switches at +80 / +76 F 80 ontact switches at +90 / +94 F 90 nly to be indicated when using a Thermo Switch. ptions T/F and T2/F are not available for banjo bolt size M0 and not be used in conjunction with Thermo Switches or Temperature Sensors. Please see page 8 for details.
4 / / rder odes Fluid Level / Temperature Indicators onnection Details and lectrical Functions Level Gauge (ompact Design) SNKK 7 (.28) Type DD: Five-pin circular connector, -coded, according to I ~55 (~2.7) 26 (.02) ontact opens and contact closes s level drops below contact level D Pin assignment at empty reservoir (default setting at point of delivery) ontact Level L3 Dial Thermometer with Probe T/T2 T2 (optional) 2 F learance Hole: Ø3 (Ø.5) for / Ø0,5 (Ø.4) for M0 / Ø3,5 (Ø.53) for UN, UNF and UNF 40 mm /.57 in in comparison with Level Gauges SNK Nominal Size SNKK 27 SNKK 50 SNKK 76 SNKK 254 SNKK 305 rder odes ( mm /in) 2 (Max.) D F (with T) F (with T2) L ,5 ~ , 5,5 57,5 257, ~ ~ ~ ,5 ~ , 5,5 57,5 257, ~ ~ ~ ,5 ~ , 5,5 57,5 257, ~ ~ ~ ,5 ~ , 5,5 57,5 257, ~ ~ ~ ,5 ~ , 5,5 57,5 257, ~ ~ ~2.36 SNKK 27 V - DD with maximum tank pressures not exceeding bar / 4.5 PSI; ideal for applications in which space is limited 5 nominal sizes from 27 mm / 5.00 in to 305 mm / 2.00 in ompact design allows space-saving installation: lways 40 mm /.57 in shorter than Level Gauges SNK of the comparable nominal size Display either undivided (SNKK ) or subdivided by strut(s) into 2 (SNKK 254) or 3 sections (SNKK 305) Media ompatibility Suitable for use with Mineral and Petroleum based Level Gauge with visual / electrical SNKK Nominal Size SNKK 27 (nominal size of 27 mm / 5.00 in) 27 SNKK 50 (nominal size of 50 mm / 5.9 in) 50 SNKK 76 (nominal size of 76 mm / 6.93 in) 76 SNKK 254 (nominal size of 254 mm / 0.00 in) 254 SNKK 305 (nominal size of 305 mm / 2.00 in) 305 onsult STUFF for alternative nominal sizes and designs. Sealing Material FPM (Viton ) lectrical Function SPDT (Single Pole Double Throw) contacts, contact opens and contact closes at DD contact level; quipped with connector Thermometer ption Supplied without thermometer and a elsius scale up to 00 T and a elsius scale up to 00 T2 and a dual scale up to 00 / 22 F TF T2F and a dual scale up to 00 / 22 F V anjo olt Size Metric IS thread (standard option) 2 Metric IS thread M0 0 thread /2 3 UN U thread /2 20 UNF (special option) U2 thread /2 28 UNF (special option) U3 Thermo Switch / Temperature Sensor ption Supplied without Thermo Switch / Temperature Sensor - reak ontact, opens at contact level (normally closed); quipped with standard connector reak ontact, opens at contact level (normally closed); quipped with connector D Make ontact, closes at contact level (normally open); quipped with standard connector Make ontact, closes at contact level (normally open); quipped with connector D Temperature Sensor ; quipped with connector PT00 Thermo Switches / Temperature Sensors only available for banjo bolt size. Please see pages 8 and 9 for details. Switching Temperature ontact switches at +60 / +40 F 60 ontact switches at +70 / +58 F 70 ontact switches at +80 / +76 F 80 ontact switches at +90 / +94 F 90 nly to be indicated when using a Thermo Switch. ptions T/F and T2/F are not available for banjo bolt size M0 and not be used in conjunction with Thermo Switches or Temperature Sensors. Please see page 8 for details. Housing made of luminium, plastic coated Sight tube and plugs made of Polyamide (P) Float made of Polyamide (P) Sealings made of FPM (Viton ) Special sight tube materials for improved UV or chemical resistance and use with special media (such as bio-degradable as well as special sealing materials are available on request. contact level within 60 mm / 2.36 in of lower banjo bolt vailable as a SPDT (Single Pole Double Throw) contact Direction of the electrical contact box is right to top by default IP 67 protection rating: Dust tight and protected against powerful water jets; even immersion (up to m / 3.28 ft) and time (IP 69K on request ) perating temperature range: / -22 F F Recommended tightening torque: 8 N m / 5.9 ft lb Minimum lateral distance to other magnetic components and cables: 0 mm /.39 in ccessories / ptions Dial thermometers with probe and a elsius or a dual elsius / Fahrenheit scale with a temperature display range of up to +00 / +22 F Thermo Switches Temperature Sensors Please see pages 8 and 9 for details. Hydraulic ccessories 7
5 Fluid Level / Temperature Indicators / / rder odes Thermo Switch TS onnection Details and lectrical Functions Types and : Industrial standard connector (contact gap: 9,4 mm /.37 in), similar to DIN N / IS (.39) 5 (4.53) 7 (.67) 25,5 (.00) 5,6 (.6) PG7 34 (.34) Types D and D: Five-pin circular connector, -coded, according to I Thermostat able 2 Ground able Thermostat able 38 (.50) 48 (.89) 8 (.7) 5,5 (.6) 5 (2.0) nalog 24 V D Signal 0 V D onnection not available onnection 2 not engaged rder odes Fluid temperature measurement in conjunction with STUFF Level Gauges SN, SNK and SNKK Installation Replaces the lower banjo bolt of the Level Gauge vailable for bolt size only learance hole: Ø3 mm / Ø.5 in Metal parts made of Steel (.078) reaches the respective switching temperature vailable with switching temperatures of +60 / +40 F, +70 / +58 F, +80 / +76 F or +90 / +94 F (with a switching tolerance of ±5 / ±9 F and a hysteresis of 35 / 63 F) vailable as a break contact (normally closed) or make contact (normally open) ither equipped with industrial standard connector (types In conjunction with Level Gauge SN In conjunction with Level Gauge SNK In conjunction with Level Gauge SNKK Maximum voltage: 250 V, 2,5 (,6), 50 Hz Maximum current at 2000 operations: 4,0 at cos = 4,45 / 250 V, 35 Maximum current at 0000 operations: 2,5 at cos =,00 / 250 V, 50 Minimum current: 20 m Maximum voltage: 42 V ( mm /in) TS - SN/SNK 60 Thermo Switch TS for use with Level Gauges SN, SNK and SNKK TS-SN/SNK lectrical Function reak contact, opens at switching temperature (normally closed); quipped with standard connector reak contact, opens at switching temperature (normally closed); quipped with connector Make contact, closes at switching temperature (normally open); quipped with standard connector Make contact, closes at switching temperature (normally open); quipped with connector Switching Temperature ontact switches at +60 / +40 F 60 ontact switches at +70 / +58 F 70 ontact switches at +80 / +76 F 80 ontact switches at +90 / +94 F 90 D D Dial Thermometer with Probe s T/T2 33 (.30) SW3 (Hex.5) T: 200 (7.87) T2: 300 (.8) with STUFF Level Gauges SN, SNK and SNKK Probe lengths of 200 mm / 7.87in or 300mm /.8 in Scale diameter of 33 mm /.30 in Please consult STUFF for special versions. 8 Scale ptions elsius scale of (types T / T2) Dual elsius / Fahrenheit scale of up to +00 / +22 F (types TF / T2F) Probe made of Stainless Steel V4 (.457) IP 65 protection rating: Dust tight and protected against water jets Installation Requires a special banjo bolt (with internal M8 port for the dial thermometer with probe) to replace the lower standard banjo bolt of the Level Gauge Use suitable wrench (SW3 / Hex.5) to fasten; turning on the body itself may damage the product Please note that Dial Thermometers with Probe can only be ordered in conjunction with Level Gauges SN, SNK and SNKK. Please see page 4 to 7 for details.
6 / / rder odes Fluid Level / Temperature Indicators onnection Details and lectrical Functions Temperature Sensor Four-pin circular connector, -coded, according to I (.55) SW6 (Hex.63) 20 (.79) SW6 (Hex.63) Hydraulic ccessories 6 (.24) 89 (3.50) Pin ssignment (.24) rder odes Temperature Sensor PT00 In conjunction with Level Gauge SN In conjunction with Level Gauge SNK In conjunction with Level Gauge SNKK ( mm /in) 43,5 45, perating temperature range (for the connector area): / -3 F F IP 68 protection rating: Dust tight and protected against powerful water jets; even immersion (beyond m / 3.28 ft) and time Fluid temperature measurement in conjunction with STUFF Level Gauges SN, SNK and SNKK; nalysis of signals with -D Display / valuation Unit, - Signal onverter or system-sided Installation Replaces the lower banjo bolt of the Level Gauge vailable for bolt size only learance hole: Ø3 mm / Ø.5 in Metal parts (inclu of Stainless Steel V2 (.4305) Measuring temperature range: / -40 F F Platinum mesuring element PT00 according to DIN N 6075, class ccuracy: ±(0,5 K + 0,002 x t ) Max. contact current: 2,0m quipped with four-pin circular connector with gold-plated contacts rder odes Temperature Sensor with Direct Installation Set Type -T - T - max. 8 (.3) SW8 (Hex.7) Temperature Sensor PT00 28 (.0) 6 (2.40) Direct daptor Direct installation set including screw nut, gasket, front ring and -ring T Sealing Material NR (una-n ) (standard option) FPM (Viton ) PDM The direct installation set can also be used in conjunction with Thermo Switches TS (see page 8). Please consult STUFF for further information. V Fluid-affected parts made of Stainless Steel V2 (.4305) screw nut made of Steel, zinc-plated Front ring made of Stainless Steel V2 (.4305) -ring and gasket made of NR (una-n ) (standard option), FPM (Viton ) or PDM Please see top of this page for Technical Details and Level Gauges SN, SNK and SNKK; nalysis of signals with -D Display / valuation Unit, - Signal onverter or system-sided Installation Installation to the outer wall of the reservoir or gearbox ompact design and easy installation learance hole: Ø3 mm / Ø.5 in 9
7 Fluid Level / Temperature Indicators / / rder odes Display / valuation Unit -D LD s Ø34 (Ø.34) Programming button 48 (.89) Display 60 (2.36) x 93 (3.66) G/2 6,5 (.65) SW 30 (Hex.8) onnector x for temperature sensor PT00; cable (0,6 m /.97 ft) included in set evaluation in conjunction with STUFF Temperature Sensor Features onnection of temperature sensor as 4-wire sensor Display of the current system temperature in or F with 4-digit alpha-numeric display Measuring temperature range: / -40 F F (may be limited by connected sensor) Generation of 2 output signals according to parameter setting: Switching output - normally open / closed (programmable) nalog output m or V (scaleable) Provision of process data via I-Link.0 (38.4 kaud) Designed for bi-directional connection perating voltage: V D urrent rating: 250 m Voltage drop: <2 m Response time of switching output: 30 ms nalog output: m or V (scaleable) ccuracy of switching output: ±0,3 / ±.54 F ccuracy of analog output: ±0,3 / ±.54 F ccuracy of display: ±0,3 / ±.54 F Resolution of switching output: 0, /.8 F Resolution of analog output: 0, /.8 F Resolution of display: 0, /.8 F Short-circuit protection (pulsed) Protection against reverse polarity and overload quipped with four-pin circular connector with gold-plated contacts IP 67 protection rating: Dust tight and protected against powerful water jets; even immersion (up to m / 3.28 ft) in water is possible under perating temperature range: / -3 F F rder odes ST--D omplete set of Display / valuation Unit for use with Temperature Sensor ST--D omplete sets include the following components: Display / valuation Unit -D able with plug / socket (0,6 m /.97 ft) xternal power supply unit V ( Hz) / 200 m User manual (D-RM) ll components included in the complete set are also available as single parts. onsult STUFF for further information. Signal onvertor - rder odes onnector for voltage supply and output signals x 25 (.98) 8 (.7) TS - SN/SNK - PT00- LD s onnector for temperature sensor PT00 52 (2.05) x 22 (.87) Signal onvertor for use with Temperature Sensor - Signal convertor for use with STUFF Temperature Sensor Features onverts the measured signal into a proportional analog signal: nalog output m (scaleable) Measuring temperature range (factory setting): / -58 F F Provision of process data via I-Link.0 (38.4 kaud) Designed for bi-directional connection 0 perating voltage: V D nalog output: m (scaleable) Rise time analog output: 400 ms ccuracy of analog output: Short-circuit protection (pulsed) Protection against reverse polarity and overload quipped with four-pin circular connector with gold-plated contacts IP 67 protection rating: Dust tight and protected against powerful water jets; even immersion (up to m / 3.28 ft) in water is possible under perating temp. range: / -3 F F
8 / / rder odes Fluid Level / Temperature Indicators Metal Sight Glasses SLW Hex ØD Thread G rder ode Thread G ( mm /in) Max. perating ØD Hex Pressure ( bar /PSI) SLW - 04 /4 8 NPT 8,6.34 6,0.63 4,8.9 6, SLW /8 8 NPT,2.44 8,3.72 5,6.32 9, SLW - 08 /2 4 NPT 4,2.56 9,8.78 5, , SLW - 2 3/4 4 NPT 9,.75 23,9.94 8,.32 26, SLW - 6 -/2 NPT 23,9.94 3,8.25 8,.32 35, SLW /4 -/2 NPT 30,5.20 3,0.22 0,4.4 44, SLW /2 -/2 NPT 36,6.44 3,0.22 0,4.4 50, SLW /2 NPT 47,8 32,5 0,4 63, Thread sizes from /4 8 NPT to 2 -/2 NPT S thread available on request Housings made of Steel, electroless nickel plated Hermetically sealed prism lenses made of Glass onsult STUFF for alternative materials. Max. operating temperature: +260 / +500 F Plastic Sight Glasses LG Hydraulic ccessories Hex ØD2 ØD Thread G rder ode Thread G ( mm /in) ØD ØD2 Hex LG - U08 - P - P LG - U2 - P - P LG - U6 - P - P LG - U20 - P - P 3/4 6 UNF -/6 2 UNF -5/6 2 UNF -5/8 2 UNF , ,9 5, ,9 5, ,9 5, Thread sizes from 3/4 6 UNF to -5/8 2 UNF S thread available on request Housings made of Polyamide (TR-90-UV) Sealings made of NR (una-n ) onsult STUFF for alternative materials. perating temp. range: / -22 F F
Catalogue 10 STAUFF Hydraulic Accessories
Fluid Level and Temperature Indicators Tank Filler Breathers Giant and Desiccant Air Breathers Suction Strainers Diffusors Catalogue 10 STAUFF Hydraulic Accessories Germany Walter Stauffenberg GmbH & Co.
More informationElectronic Temperature Control & Bulb Well Assembly (AC)
Electronic Temperature ontrol & ulb Well ssembly () 0916 86816 This is a line voltage single-stage electronic temperature control with singlepole, double-throw relay output and LED indication. It is designed
More informationClass 1 as per EN o C to 65o C 15 kg/cm2 ( without thermowell ) 120 % of Full Scale 8 mm ½ BSP (M) Adjustable
Special Features & tex approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil filled (optional) Standard followed EN 90. pplication
More information1.4 SCT Temperature sensor
1.4 SCT-150-14-00 Temperature sensor Pressure-proof up to 630 bar Compact construction Rugged steel housing Simple installation -50 C to +125 C 0/4...20 ma Compact construction and high pressure resistance
More informationGT All SS Industrial Dial Thermometer Gas Filled system
TM ll SS Industrial Dial Thermometer Gas Filled system Special Features approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil
More informationAdjustment range. Seal material. Pressure connection
0520 Order matrix for electronic pressure switches.3 Type Adjustment range Pressure connection Seal material lectrical connection Type lectronic pressure switch 0520 Adjustment range 1) for NO 0 145 psi
More informationFLOW CONTROL VALVES A5-1 PN# / / ACC
FLOW CONTROL VLVES Flow Control Valves The HYDC family of flow control valves permit safe, simple and repeatable control of hydraulic fluids at operating pressures to psi. The standard slotted control
More informationElectronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E.5 switching output Electronic pressure switches, High-Performance series with one switching output Outstanding overpressure protection (up
More informationElectronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E.6 2 switching outputs Electronic pressure switches, High-Performance series with two switching outputs Outstanding overpressure protection
More informationStauff Hydraulic Accessories
Hydraulic & Offshore Supplies Stauff Hydraulic Accessories YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE Contents STAUFF Hydraulic Accessories
More informationModulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
More informationFlow Control Valves. Overview. Accessories Catalog. Needle Valves. Flow Control Valves. Pressure Compensated Flow Control Valves.
Overview Needle Valves DV, DVE & DVP Series (see page ) Flow Control Valves DRV & DRVP Series (see page ) Pressure Compensated Flow Control Valves SRVR Series (see page ) Check Valves RV & RVP Series (see
More informationTEMPERATURE CONTROL AND MONITORING HYDRAULIC COMPONENTS
Electronic level and temperature control Gasket (NBR) Operating pressure: max. 1 bar Operating temperature: -20 C up to +80 C Ambient temperature: -20 C up to +70 C Weight: approx. 400g Sealing fl uid:
More information188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative c
The 188 is a 3 Way, 10 mm wide micro solenoid valve designed to be used in fluid power applications. Using air or other neutral gasses the 188 can be used to pilot other valves or cylinders. ompact manifold
More informationProcess Connections for Dial Thermometers
sales@jumo.co.uk Data Sheet 608730 Page 1/7 Process Connections for Dial Thermometers Special features Temperature probes (TF) Process s (TA) Thermowell (SH) Temperature probes (TF) (S 1 min. 25 mm for
More informationELD Series - DC Motor Drive
ELD Series - D Motor Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements and long life D electrical powered fans to give extended
More informationFloat switch with switching contacts and temperature contact, with resistance measuring chain / resistance thermometer, with display and control unit
Float switch with switching contacts and temperature contact, with resistance measuring chain / resistance thermometer, with display and control unit RE 50/05.0 Replaces: 50 /8 Type ABZMS- Component series
More informationTYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
More informationMBS 1200 and MBS 1250
Data sheet OEM Pressure Transmitters for heavy-duty applications MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic applications. The programme
More informationOEM Pressure Transmitters for heavy-duty applications Type MBS 1200 and MBS 1250
Data sheet OEM Pressure Transmitters for heavy-duty applications Type MBS 100 and MBS 150 The compact OEM pressure transmitter programme is designed for use in severe hydraulic applications. The programme
More informationJUMO MIDAS S05 Pressure transmitter Type
Data Sheet 40.00 Page /8 JUMO MIDAS S05 Pressure transmitter Type 4000 Brief description The JUMO MIDAS S05 pressure transmitter is available with both relative pressure and absolute pressure measurement
More informationP1Z Series Guided Version
Rodless Pneumatic ylinder Magnetically oupled orrosion resistant Guide carriage and endcaps in anodized aluminium Load fixing by 4 tapped holes onto the guide carriage ylinder mounting End cap with mounting
More informationup to size 381 up to PN 0.5 bar up to T = 80 C Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TSE
up to size 381 up to PN 0.5 bar up to T = 80 C Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TSE 1. DESCRIPTION 1.1. GENERAL HYDAC fluid level gauges FSA, fluid level sensors FSK
More informationTC-200 Series. Application. Features. Applicable Literature. Single Bulb Thermostats General Instructions
T-200 Series Single ulb Thermostats General Instructions Application These units are used for on-off control of media temperature in ducts, tanks, etc. Features Mechanism enclosed in rugged die cast case
More informationHydraulic Systems Hydraulic Clamping
ydraulic Systems 19. 1 ydraulic lamping Page ydraulic lamping Page 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 19.2-19.3 3-1-S-475 3-1--475 19.6 52-Series 19.3 3-1-S-11 19.7 3-1--11
More informationModel B. Thermostatic Valves FEATURES APPLICATIONS FLOW RATES OF USGPM TAMPER-PROOF TEMPERATURE SETTINGS OF 55 F F
Model Thermostatic Valves FETURES FLOW RTES OF 68-1200 USGPM TMPER-PROOF TEMPERTURE SETTINGS OF 55 F - 240 F OMPLETELY SELF-ONTINED POSITIVE 3-WY VLVE TION VILLE IN ST IRON, DUTILE IRON, RONZE, STEEL,
More informationLevel Switches. Level Float Switch. Visual/Electrical Low Level. LEN Series RL Series. LV/E1 Series. S e c t i o n
Level Switches Level Float Switch LEN Series RL Series Visual/Electrical Low Level LV/E1 Series S e c t i o n 5 Level Float Switch - LEN Series The electromagnetic level indicator activates an electric
More informationWaterproof Series Waterproof
Waterproof Series Waterproof Technical Data Panel connector Panel connector, cable connector and coupler connector circular housing Locking screw connection Protection IP 65 with flat-gasket for panel
More informationMESSKO COMPACT SERIES OIL TEMPERATURE ORDERING SPECIFICATIONS.
MESSKO COMPACT SERIES OIL TEMPERATURE ORDERING SPECIFICATIONS. M ES SKO INS TR U ME NTS MESSKO Compact Series - North America Version Type MT-ST160SK(TT) Oil Temperature Project/Reference: US probe 7RM
More informationKombiTemp. Head form B / Head form J Cable socket, angle type Diesel engine dial thermometers. Temperature Sensors with local display
JJ Head form B / Head form J JJ Cable socket, angle type JJ Diesel engine dial thermometers KombiTemp Temperature Sensors with local display Including products with: DS_KombiTemp 8/5 Dual temperature control
More informationMechanical Measuring Instruments
JJ SIKA thermometers JJ SIKA glass inserts for replacement JJ Diesel engine protection tubes JJ Diesel engine thermometers JJ KombiTemp dial thermometers JJ Bimetal dial thermometers JJ Pressure gauges
More informationProportional Solenoids for Hydraulics G RC Y 037, 045, 063
Proportional Solenoids for Hydraulics 4 Product group G RC Y 037, 045, 063 According to DIN VDE 0580 Armature space pressure tight Nominal operating pressure (dynamic) Magnetic force vs stroke graph horizontal
More informationPressure transmitters for heavy duty applications MBS 3200 and 3250
Data sheet Pressure transmitters for heavy duty applications MBS 3200 and 3250 The compact high temperature pressure transmitter MBS 3200 is designed for use in hydraulic and almost all industrial applications,
More informationØ5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
More informationSPOOL VALVES pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, NAMUR style, 1/4 to 1/2
FTURS SPOOL VLVS pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, NMUR style, / to / SO/JOUOMTI solenoid valves satisfy all relevant irectives
More informationPressure transmitters for heavy duty applications MBS 8200 and MBS 8250
Data sheet Pressure transmitters for heavy duty applications MBS 8200 and MBS 8250 MBS 8200 is a series of compact pressure transmitters developed to withstand the pressure pulsations and vibrations known
More informationELD Series - DC Motor Drive
ELD Series - D Motor Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements and long life D electrical powered fans to give extended
More informationTZ04. Dial Thermometer (nitrogen-filled gauge) Temperature Measurement and Monitoring. Housing sizes from 63 to 250 mm. Stainless steel housing
Temperature Measurement and Monitoring TZ04 Dial Thermometer (nitrogen-filled gauge) Housing sizes from 63 to 250 mm Stainless steel housing Available with directly attached sensor or with capillary line
More informationPressure transmitter for industrial applications Type MBS 4500
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4500 The high accuracy pressure transmitter MBS 4500 is designed for use in almost all industrial applications,
More informationhydraulic power clamps
ourtesy of M/Flodyne/ydradyne Motion ontrol ydraulic Pneumatic lectrical Mechanical (8) 426-548 www.cmafh.com hydraulic power clamps Table of ontents ydraulic lamping 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4
More informationMagHex Fan Controller
MagHex Fan ontroller 0916 ompact Programmable Temperature Sensor This combined sensor and controller is designed to mount directly to the heat exchanger. It provides accurate temperature control by cycling
More informationhydraulic power clamps
hydraulic power clamps Table of ontents lick Page # View ydraulic lamping Page M-Y-# ydraulic lamping Page M-Y-# 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 3-4 3-1-S-475 3-1--475
More informationResistance Thermometers Model TR217, with Spring-Loaded Probe Tip
Electrical Temperature Measurement Resistance Thermometers Model TR217, with Spring-Loaded Probe Tip WIKA Data Sheet TE 60.22 Applications Temperature measurement at bearings of: T Pumps T Gears T Motors
More informationOEM Pressure transmitter for industrial applications Type MBS Technical brochure
OEM Pressure transmitter for industrial applications Type MBS 1200 Technical brochure Features Designed for use in severe industrial OEM applications For medium and ambient temperatures up to 125ºC All
More informationJUMO MIDAS Pressure transmitter
Phone: +44 19 635533 Fax: +44 19 6356 Data Sheet 401001 Page 1/5 JUMO MIDAS Pressure transmitter Brief description Pressure transmitters are used for measuring the relative (gauge) pressure in liquids
More informationPressure Transmitters
Transmitters Wetted parts are all made of stainless steel for high resistance to chemicals Stainless steel diaphragm welded with casing No seals and thus low leakage rate even with difficult gases High
More informationHigh temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250
Data sheet High temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250 The compact heavy duty pressure transmitter type MBS 2200 and MBS 2250 are designed for use in severe
More informationPressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all
More informationOrifice Flow Meter (Series FKOP/FKOE)
Overview FKOP and FKOE series is low-cost flow meter for liquids and gases based on orifice principle. FKOP series combines a variable area flow meter (rotameter) and orifice flow meter principles. A small
More informationTorque Sensor. Torque. Mini-Smart Torque Sensor. Type 4502A...
Torque Torque Sensor ini-smart Torque Sensor 4502... 4502... torque sensors operate on the strain gage principle and supply an analog output signal of ±0... 5 V which is contactless transferred. vailable
More informationTechnical explanations for mechanical pressure switches
Technical explanations for mechanical pressure switches 7 6 5 4 7 5 6 4 Diaphragm pressure switch NO Piston pressure switch NC Change over 3 2a 1 3 2b 10 9 What is a mechanical pressure switch? Mechanical
More informationMS/Standard DL-Class Pre-Earth type
MS/Standard L-lass Pre-arth type mphenol R mphenol ML--5015 onnectors L Series Pre-earth type L Series are highly reliable circular connectors (wire soldering type) approved by TUV satisfying uropean safety
More informationPressure transmitter for marine applications MBS 3100 and MBS 3150
Data sheet Pressure transmitter for marine applications MBS 3100 and MBS 3150 The compact ship approved pressure transmitters MBS 3100 and MBS 3150 are designed for use in almost all marine applications.
More informationCompact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe
Compact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe SERIES Features Industrial quality miniature actuator Industrial grade True Union ball valve Visual valve position indicator
More informationMiniature Solenoid Valves
Miniature Solenoid Valves Our IPS Miniature Solenoid Valves offer precision performance under extreme conditions. Offered as 2-Way and 3-Way Valves with four internal body configurations and five seat
More informationSection 2 - BUSLIGN Fittings For Rigid Busbar
POWERFORMED Substations atalogue: Section Section - USLIGN Fittings For Rigid usbar USLIGN Fittings For Rigid usbar Table of ontents Sec/Page Table of ontents Sec/Page Endcaps usbar End aps (Weld-on)...
More informationPiston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
More informationDuct thermometer Model TF40
Electrical temperature measurement Duct thermometer Model TF40 WIKA data sheet TE 67.16 Applications Air-conditioning technology Ventilation technology Refrigeration technology Heating technology Special
More informationSTAUFF. Hydraulic Accessories. Local solutions for individual customers worldwide
STUFF Hydraulic ccessories Local solutions for individual customers worldwide Walter Stauffenberg GmbH & Co. KG P.O.Box 1745 58777 Werdohl Germany Im Ehrenfeld 4 58791 Werdohl Germany Telephone: + 49 2392
More informationFilled System Thermometers
illed System Thermometers Model N & NR Mechanical Thermometers ata sheet : ST/2012 The Rototherm range of filled system thermometers offer tough yet accurate instruments with rigid stems for direct mounting
More informationProportional directional valves, pilot operated, with electrical position feedback and integrated electronics (OBE)
Proportional directional valves, pilot operated, with electrical position feedback and integrated electronics (OE) RE 29075/08.13 Replaces: 08.04 1/22 Type 4WRKE Size 10 to 35 Component series 3X Maximum
More informationEHP Series Piston Accumulators. 0.1 to 1000 Litres, up to 350 bar (as standard)
EHP Series Piston ccumulators 0.1 to 1000 Litres, up to 350 bar (as standard) Description The EHP piston accumulators are manufactured in arbon & Stainless Steel and are available with a wide range of
More informationPressure transmitters for heavy duty applications Type MBS 3250
Pressure transmitters for heavy duty applications Type MBS 3250 Features Designed for use in harsh industrial environments For medium and ambient temperatures up to 125 C With integrated pulse-snubber.
More informationAdjustable Difference on Decreasing Pressure (adds to working pressure) Y (lower) Actuator
Pressure Switches Differential/Dual Stage, G lass 90 / Refer to atalog 90T901 Differential Pressure Switch Differential pressure switches monitor the change in the difference between two pressures. G differential
More informationPressure transmitters for heavy-duty applications MBS 2000 and MBS 2050
Data sheet Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050 The compact heavy duty pressure transmitters MBS 2000 and MBS 2050 are designed for use in hydraulic applications. MBS
More informationIFP S.A.E. 4 BOLT FLANGE FITTINGS
3¼ 4 5 IFP S.A.E. 4 BOLT FLANGE FITTINGS 2-214 2-218 2-222 2-225 2-228 2-232 2-237 Supplied complete with mounting hardware (O-ring, Socket Head Cap Screw & Hi- Collar Lock Washer ) J 1.2 IFP FILLER /
More informationPage 1/6. Temperature sensor baelz 61 with questionnaire for inquiries on page 5 DS 61, 251
Page 1/6 Temperature sensor with questionnaire for inquiries on page 5 DS 61, 251 Pipe immersion temperature sensor Stainless steel screw-in protection well baelz 251-S5 Stainless steel weld-in protection
More information1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
More informationPressure Transmitter for wind turbine applications MBS 8200 and MBS 8250
Data sheet Pressure Transmitter for wind turbine applications MBS 8200 and MBS 8250 MBS 8200 is a series of compact pressure transmitters developed to withstand the pressure pulsations and vibrations known
More informationPresentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508
Presentation, pplication Severe uty Limit Switches 0 onforming to NEM 600 and UL508 escription 9007T Mill Switches Use the 9007T Mill switches instead of other limit switches in the following applications:
More informationSpiraflo Steam flowmeters
Spiraflo Steam flowmeters Using a Spiraflo steam meter from Spirax Sarco will enable you to measure steam use accurately under all load conditions. It will provide vital information on usage and associated
More informationOIL FILLER AND AIR BREATHER FILLER CAPS
OIL FILLER ND IR RETHER FILLER CPS The complete series of oil filter and makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. s perform
More informationMatic TM. Data sheet Sheet No.: Rev. A EL-O-MATIC ACTUATORS WITH ASCO SOLENOID VALVES Date: November /2 NC 5/2
ata sheet Sheet No.:.06. Rev. -O-MTI TUTORS WITH SO SOLNOI VLVS ate: November 009 Selector plate for / - / function lectrical entry Pg 9 8 ir entry G/" Speed control (optional) 7 Speed control (optional)
More informationDifferential Pressure Sensors
1 920 1920P01 Differential Pressure Sensors for neutral and mildly corrosive liquids and gases QBE63-DP Differential pressure sensor, suitable for gases and liquids, for the measurement of positive and
More informationCable resistance thermometer Model TR40
Electrical temperature measurement Cable resistance thermometer Model TR40 WIKA data sheet TE 60.40 further approvals see page 11 Applications For direct installation into the process Machine building
More informationGeneral Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
More informationRemote reading dial thermometers, version for industry
Remote reading dial thermometers, version for industry Type 313 WH, 323 TA, 333 TE and 334 KL Measuring system Nitrogen filled Type 313 WH Accuracy (EN 13190) Class 1 Case Crimped-on ring, stainless steel
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More informationThe range of products is completed by a number of accessories, including:
ACCESSORIES The range of products is completed by a number of accessories, including: Foot brackets, which serve to support the motor-and-pump unit in the event that the selected electric motor does not
More information7 Condition Monitoring
Pressure switch /PS Condition Monitoring.1 Pressure switch /PS All gear units with pressure lubrication are equipped with a pressure switch for function monitoring. The pressure switch is to be connected
More informationNG06. General Size NG6 NG10 Design
Catalog HY14-255/US Series VY*K General Series VY*K pilot operated sequence valves feature proportional adjustment and an external drain. The external drain allows application as both a sequence valve
More informationDial thermometers. Gas filled system and Bi-metal. dial thermometers
JJ Dial thermometers JJ Diesel engine thermometers JJ Low temperature dial thermometers JJ Remote reading dial thermometers JJ Remote reading diesel engine thermometers JJ Remote reading low temperature
More informationCompressed Air Lubricators
ompressed ir s Operating pressure onnection Device Page max. bar thread made of plastic 16 G¼ - G1 L042... L095.02 Maxi -Series, robust, block design 17 G¼ - G1 L20.03 Standard -Series, robust 21 G¼ -
More informationTajimi Electronics Co
1108 series 1108 series connectors are built compact and the tight waterproofing mechanism allows the model to be at a depth 30 meters under water. This model is also ideal for application where units
More informationOmnigrad TA20, TA21. Technical Information. Temperature Measuring Technology Terminal heads for mounting on thermowells of resistance thermometers
Technical Information Omnigrad T0, T Temperature Measuring Technology Terminal heads for mounting on thermowells of resistance thermometers and thermocouples Function and system design ll terminal heads
More informationfluid technology temperature sensors 1600 intelligent temperature sensor membrane keyboard, USB opto interface
fluid technology temperature sensors 1600 1 dimensions Ø38 x 118mm temperature operating range -40 to +300 C temperature measuring range from -40 to +300 C M12 socket for PT100 resistance thermometer analog
More informationSERIES SF2-500 SUCTION FILTER. Flow rates to 225 gpm
SERIES SF2-5 SUTION FILTER Flow rates to 225 gpm D e s c r i p t i o n 5 The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 225 gpm and filtration from
More informationJUMO MIDAS S06. OEM-Pressure Transmitter Low Pressure. Applications. Brief description. Customer benefits. Special features
Delivery address: Mackenrodtstraße 609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: +9 66 600-0 Fax: +9 66 600-607 Harlow, Essex CM 0 DY, UK Phone: + 79 6 55 Fax: + 79 6 50 9 67 Myers Road
More informationYour Global Source for Today s Most Popular Solenoid Valves
lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves, a division of International
More informationAccessories Cable glands
Accessories Cable glands 235 Technical data Cable glands Brass hexagon cable gland Brass sealing cable gland Material: Brass, nickel-plated Gasket: Soft rubber Protection type IP 54 Additional information:
More information2.3 MEDIUM HEAVY DUTY SERIES
2 2.3 MEDIUM HEAVY DUTY SERIES CONTENTS PPV11 Ordering Code 2.3.1 Medium Heavy Duty Series 2.3.2 Torque limiter settings Technical Information 2.3.3 Specifications 2.3.4 Hydraulic fluids 2.3.5 Viscosity
More informationPressure transmitter for general industrial purposes MBS 3000 and MBS 3050
Data sheet Pressure transmitter for general industrial purposes MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all industrial applications, and offers
More informationDirectional spool valves, direct operated, smoothly switching, with solenoid actuation
Directional spool valves, direct operated, smoothly switching, with solenoid actuation Type WE..73 A12 H7564 Features 4/2 or 4/3 directional design Porting pattern according to DIN 24340 form A Porting
More informationA Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation Guided-wave
More informationQuick quarter-turn rotation. High cycle stem design. Integrated mounting pad for actuators. Compact assembly. Complete line of accessories.
36 Series Stainless Steel 2-way ull Port all Valve The 36 is a full port, 36 stainless steel, 3 piece ball valve. t is available with threaded ends (36N), socket weld ends (36S), or quick clamp ends with
More informationSteering column and sensor
Steering column and sensor Type LAB Series 1 x Nominal voltage 12 to 48 volt Output signal digital, analog and direction (option) HE 11874 / 09.2017 2 LAB HE 11874 / 09.2017 Page Content 4 4 5 6 7 7 8
More information0190 / Tolerance in psi (bar) at room temperature. Adjustment range in psi (bar) psi. ± 2.90 psi. (± 0.2 bar) (0.3-1.
0190 / 0191 Diaphragm / piston pressure switches up to 24 V with gold contacts Zinc-plated steel (CrVI-free), with spade terminal Snap action with gold contacts Overpressure safety up to 1,450 / 4,350
More informationINSTRUMENTATION & CONTROL
Irrigation Controller.................... 172 Window Controller.................... 174 Water Meter Controller.................. 176 Digital Level Switch.................... 177 Filtration Controller Set..................
More informationTorque Sensor. Torque. Mini-Smart Torque Sensor. Type 4502A...
Torque Torque Sensor ini-smart Torque Sensor 4502... 4502... torque sensors operate on the strain gage principle and supply an analog output signal of ±0... 5 V which is contactless transferred. vailable
More informationDFE. solenoid control monoblock valve. Content. Working conditions Hydraulic circuit DFE052. Dimensional data Ordering codes...
DFE Content Working conditions... 54 Hydraulic circuit... 55 DFE52 DFE1 DFE2 Dimensional data... 6 Ordering codes... 64 Positioner kits... 67 Solenoid parts... 68 Dimensional data... 69 Ordering codes...
More information