JUMO MIDAS S05 Pressure transmitter Type

Transcription

1 Data Sheet Page /8 JUMO MIDAS S05 Pressure transmitter Type 4000 Brief description The JUMO MIDAS S05 pressure transmitter is available with both relative pressure and absolute pressure measurement ranges. The high-quality stainless steel welded measuring system with no seals ensures the instrument can be used in almost all media, even under harsh conditions. The design offers optimum safety against process medium escaping. The instrument features a silicon sensor that is able to handle extreme overload, even in the lowest measurement ranges, and is capable of millions of pressure cycles. Many applications may be found in cooling and air conditioning systems, compressors, mechanical engineering, commercial vehicles, and industrial pneumatic uses. Type 4000/... Key features Welded measuring system without seals Parts in contact with medium made of stainless steel Resistant to coolants Extremely overload-resistant For measuring relative and absolute pressure Available with terminal box to DIN 4650

2 Data Sheet Page /8 Technical data General Reference conditions Per DIN and DIN EN Sensor Material Pressure transfer medium Permissible load change Location Mounting location Calibration location Silicon sensor with stainless steel separating diaphragm Synthetic oil > 0 million Any Device standing vertically, process connection on bottom Input Relative and absolute pressure Measuring range (bar) 0 to 0 to.6 0 to.5 0 to 4 0 to 6 0 to 0 0 to 6 0 to 5 Overload capacity (bar) - to 4 - to 6 - to 0 - to 6 - to 4 - to 40 - to 60 - to 00 Bursting pressure (bar) Measuring range (bar) 0 to 40 0 to 60 Overload capacity (bar) - to 00 - to 00 Bursting pressure (bar) 50 Measuring range (bar) - to 0 - to to.5 - to - to 5 - to 9 - to 5 - to 4 Overload capacity (bar) - to 4 - to 6 - to 0 - to 6 - to 4 - to Bursting pressure (bar) All pressure transmitters are vacuum-proof Analog output Output signal Electrical current Output 405 Voltage Output 4 Output 45 Output 48 Output 40 Other outputs Jump response t 90 Burden 4to0mA 0.5 to 4.5 V to5v to6v 0to0V 4to0mA, wires 0.5 to 4.5 V three wires (ratiometrically 0 to 90% of the power supply) 0to0V three wires to 5 V three wires to 6 V three wires on request 5 ms R i (U B - 8 V) / 0.0 A 0 kω 0 kω 0 kω 0 kω

3 Data Sheet Page /8 Measurement deviation Relative and absolute pressure Nominal measuring range (bar) 0 to 0 to.6 0 to.5 0 to 4 0 to 6 0 to 0 0 to 6 0 to 5 Non-linearity (% of full scale) Total error at +0 C 0.6 (% of full scale) Total error at -0 to +00 C.5 (% of full scale) Nominal measuring range (bar) 0 to 40 0 to 60 Non-linearity (% of full scale) 0. Total error at +0 C 0.5 (% of full scale) Total error at -0 to +00 C.0 (% of full scale) Measuring range (bar) - to 0 - to to.5 - to - to 5 - to 9 - to 5 - to 4 Non-linearity (% of full scale) Total error at +0 C 0.5 (% of full scale) Total error at C. (% of full scale) Non-linearity based on limit point setting Includes: non-linearity, hysteresis, non-repeatability, deviation from initial and final values of measuring range Includes: non-linearity, hysteresis, non-repeatability, deviation from initial and final values of measuring range, thermal effect on initial value of measuring range and span Mechanical properties Materials Process connection Seal Diaphragm Enclosure Threaded sleeve Mx Connector Weight Instrument with process connection 50 (G/4) Stainless steel 04 The measuring system is welded with no seals 4 Stainless steel 6L Stainless steel 04 Stainless steel 0 PBT-GF0 80 g 4 Pressure transmitters with process connection 5 come with an FPM seal Ambient conditions Permissible temperatures with electrical connection 6, 5 or 6 Measuring material Environment Storage With electrical connation Measuring material Environment Storage At ambient temperature -50 C Restricted function Permissible relative humidity Operation Storage -40 to +5 C -40 to +5 C -40 to +5 C -40 to +5 C -40 to +00 C -40 to +00 C Stationary use only, danger of broken cable 00% rel. humidity, incl. condensation on the outer sleeve of the instrument 90% relative humidity, no condensation

4 Data Sheet Page 4/8 Permissible mechanical loading Vibration strength Shock resistance Electromagnetic compatibility Interference emission Interference immunity Enclosure protection to EN 6059 with electrical connection (fixed cable and relative pressure measuring range) (fixed cable and absolute pressure measuring range) 6 (round plug M x ) 5 (Mini Metri Pack series 50) 5 (bayonet connector) 6 (terminal box) 4 0 g at to 000 Hz 50 g for ms 00 g for ms Class A Performance characteristic A IP66 IP67 IP66 IP67 IP67 IP65 Per IEC Per IEC Per EN66 4 Minimum connection line diameter 5 mm, maximum 7 mm Power supply Auxiliary power Terminal assignment Power supply U B for output 405 = 4 to 0 ma for output 4 = 0.5 to 4.5 V for output 45 = 0 to 0 V for output 48 = to 5 V for output 40 = to 6 V Residual ripple Reverse polarity protection Power consumption Circuit Electrical connection = Fixed cable 6 = Round plug M x 5 = Mini Metri Pack series 50 5 = Bayonet connector 6 = Terminal box See page 6/8 8 to 0 V DC, nominal voltage 4 V DC 5V DC ± 0.5 V, nominal voltage 5 V DC.5 to 0 V DC, nominal voltage 4 V DC 8 to 0 V DC, nominal voltage 4 V DC 8 to 0 V DC, nominal voltage 4 V DC Peak voltages must not exceed or fall below the values specified for the supply voltage yes 5 ma SELV 4-core cable, PVC, length m (other lengths available on request) 4-pin, A-coded Mini Metri Pack series 50 DIN 7585 A -. DIN 750 Form A 5 5 Conductor cross-section.5 mm

5 Data Sheet Page 5/8 Electrical connection Connection Terminal assignment Devices with -wire output Power supply for output 4 5 V DC for output 45.5 to 0 V DC for output 48 8 to 0 V DC for output 40 8 to 0 V DC Output 4 = 0.5 to 4.5 V, ratiometric 45 = 0to0V 48 = to 5 V 40 = to 6 V Devices with wire output Power supply for output to 0 V DC U B 0V S- S+ U B 0V Cable white + brown - brown - yellow + white + brown Mx Mini Metri Pack Bayonet Terminal box L+ L- - + L+ L- Output 405 = ma, wire Impressed current 4 to 0 ma in power supply voltage S- S+ white brown

6 Data Sheet Page 6/8 Dimensions 5 Mx ø.6 46 / 48* / 47* / 54* 5 9 Pg ø5 ø9.5 G/4 ø.5 ø6 ø7.5 6 ø.5 /4-8 NPT G/ ø 9 G /4 8.8 /4-8 NPT.5.6 G / h 0. ø G/4 Profiled seal G/4 ø.5 ø9.5.5 ø9.5 7/6-0 UNF 4.5 ø /6-0 UNF with internal valve core depresser ø ø G / h 0. SW 7/6-0 UNF ø 6

7 Data Sheet Page 7/8 Order details () Basic type 4000 JUMO MIDAS S05 pressure transmitter () Basic type extensions 000 None 999 Special design () Input bar relative pressure bar relative pressure bar relative pressure bar relative pressure bar relative pressure bar relative pressure bar relative pressure bar relative pressure bar relative pressure bar relative pressure bar relative pressure bar relative pressure bar relative pressure bar relative pressure bar relative pressure bar relative pressure bar relative pressure bar relative pressure bar absolute pressure bar absolute pressure bar absolute pressure bar absolute pressure bar absolute pressure bar absolute pressure bar absolute pressure bar absolute pressure bar absolute pressure 998 Special measuring range for absolute pressure 999 Special measuring range for relative pressure (4) Output to 0 ma wires to 4.5 V wires 45 0 to 0 V wires 48 to 5 V wires 40 to 6 V wires (5) Process connection (not front-flush) 50 G /4 to DIN EN G / to DIN EN 87 5 /4-8 NPT to DIN 87 5 G/4 to DIN 85 T 56 7/6-0 UNF 56 7/6-0 UNF inside, with valve opener (6) Process connection material 0 Stainless steel (7) Electrical connection Fixed cable 6 Round plug M 5 Mini Metri Pack series 50 5 Bayonet connector 6 Terminal box Available on request

8 Data Sheet Page 8/8 (8) Extra codes 000 None 59 Throttle in pressure channel 64 Free of oil and grease 60 Larger channel hole () () () (4) (5) (6) (7) (8) Order code / / Sample order 4000 / / 000 Accessories Designation Sales no. 4-pin cable connector (straight) M x with m PVC cable 40/ pin angle box M x with m PVC cable 40/004094