Flow Measurement. SITRANS F US Clamp-on. SITRANS FUP1010 (Portable) 4/318 Siemens FI Overview

Transcription

1 Flow Measurement SITRNS F US lamp-on Siemens G 2011 Overview SITRNS FUP1010 clamp-on non-intrusive ultrasonic flow transmitter offers maximum versatility plus battery power for portable field use. It can operate in either Wideeam transit time or reflexor (oppler) mode, making it suitable for virtually any liquid, even those with high aeration or suspended solids. SITRNS FUP1010 is available in single and dual channel or dual path configurations, with IP67 weatherproof enclosure. pplication SITRNS FUP1010 is suitable for a wide variety of liquid applications, including the following: Water industry -Raw water -Potable water - hemicals Wastewater industry -Raw sewage - ffluent -Sludges - Mixed liquor - hemicals HV industry - hillers - ondensers - Hot and cold water systems - Thermal energy rate and total Power industry - Nuclear - Fossil - Hydroelectric Processing industry - Process control -atching - Rate indication - Volumetric and mass measurement enefits attery power facilitates field use; the meter is easily transported from one installation to another saving time for surveys, monitoring and temporary installations Weatherproof enclosure can be used outdoors and left in place without concern for rain damage Rugged plastic case enables it to withstand rough treatment that would destroy most other meters Versatility - there is no need to change meters when operating conditions change asy installation; no need to cut pipe or stop flow Minimal maintenance; external sensors do not require periodic cleaning No moving parts to wear or foul No pressure drop or energy loss Wide turn-down ratio hoice of single or dual channel models minimizes total cost ZeroMatic Path automatically sets zero without stopping flow and reduces zero drift, even at low flow Note that the SITRNS FUP1010 flow transmitter is not available with hazardous area approvals esign IP67 Weatherproof / Impact resistant enclosure constructed of mineral reinforced copolymer polypropylene - Single channel - ual channel / dual path Function Integral 33 button keypad and large (128 x 20 pixel) graphic display visible up to 12 m (0 ft) away urrent, voltage, frequency and RS232 outputs (see specification section for details) Optional current, voltage and temperature inputs (see specification section for details) ZeroMatic Path automatically sets zero i-directional flow operation 1 Myte data logger with both site and data logger storage nglish, Spanish, German, Italian and French language options /318 Siemens FI

2 Siemens G 2011 Flow Measurement SITRNS F US lamp-on Technical specifications Input Flow range ± 12 m/s (± 0 ft/s), bidirectional Pipe size 6. mm 9.1 m ( ) Inputs, single channel Output Outputs ccuracy ccuracy atch repeatability Rated operation conditions egree of protection Weatherproof/impact resistant Liquid temperature Standard Optional mbient temperature esign imensions Weight Power supply Power attery operation Indication and operation ata logger memory Site storage memory isplay Keypad Language options ertificates and approvals Unclassified locations lassified locations urrent: 2x 20 m Voltage: 2 x 0 10 V Temperature: 2 x wire 1 kω RT urrent: 2x 20 m (1 kω at 30 V ) Voltage: 2 x 0 10 V (5 kω minimum) Status larm: x SPT Relays Frequency: 2 x Hz RS232 ± 0.5 % 2 % of flow, for velocities greater than 0.3 m/s (1 ft/s) ± m/s (± ft/s), for velocities less than 0.3 m/s (1 ft/s) ± 0.15 % of flow, for velocities greater than 0.3 m/s (1 ft/s) ± m/s (± ft/s), for velocities less than 0.3 m/s (1 ft/s) IP ( F) ( F) (0 10 F) see SITRNS F US lamp-on "System info and selection guide" see diagrams Internal rechargeable battery 7 hours 1 Myte 50 sites minimum 128 x 20 pixel L with backlight 33 keypad buttons with tactile feedback nglish, Spanish, German, Italian, French UL ULc M irective 200/108/ TX irective 9/9/ Siemens FI /319

3 Flow Measurement SITRNS F US lamp-on Siemens G 2011 Standard MLF for quick delivery on SITRNS FUP1010 Portable (excluding energy) Selection and Ordering data Order No. Order ode Number of channels/ultrasonic paths Single channel 1 ual channel/ual path 2 L) 7M3510- Standard flowmeter types and I/O configurations Standard I/O - 2 x m analog in -2xRT input Sensor cables No sensor cable 1 x PV Jacket cable, length 6 m/20 ft 2 x PV Jacket cable, length 6 m/20 ft 1 x PV Jacket cable, length 15 m/50 ft 2 x PV Jacket cable, length 15 m/50 ft RT temperature Sensor (Mounting hardware & cable included) No RTs 0 1 x standard clamp-on RT, 6 m/20 ft cable 5 2 x standard clamp-on RT with 6 m/20 ft cable 6 1 x standard clamp-on RT with 15 m/50 ft cable 7 2 x standard clamp-on RT with 15 m/50 ft cable 8 attery charger options No battery charger 0 harger Type for urope (7/7) 1 harger Type G for U.S. (NM 5-15P) 5 Sensor for channel 1 (includes pipe mounting kit and spacer bar for indicated max. outer diameter listed) See "Sensor selection charts" for specifications. no sensor 2 universal Trackmount and straps 3 universal Trackmount and straps 3 universal Mounting frame and 300 mm (13 ) 3 universal Mounting frame and 2 universal Mounting frame and F 1H (high precision) Mounting frame and M 2H (high precision) Mounting frame and N 1H (high precision) Mounting frame and P H (high precision) Mounting frame and R oppler to 12" with strap kit S (not for IP65 (NM 7)) 1H High temperature range Z 10 / 220 F HP 2) P 1 P Selection and Ordering data Order No. Order ode L) 7M3510- Sensor for channel 2 (includes pipe mounting kit and spacer bar for indicated max. outer diameter listed) See "Sensor selection charts" for specifications. no sensor 2 universal Trackmount and straps 3 universal Trackmount and straps 3 universal Mounting frame and 300 mm (13 ) 3 universal Mounting frame and 2 universal Mounting frame and F 1H (high precision) Mounting frame and M 2H (high precision) Mounting frame and N 1H (high precision) Mounting frame and P 2H (high precision) Mounting frame and Q oppler to 12" with strap kit S (not for IP65 (NM 7)) 1H High temperature Z Q 1 P range 10 / 220 F HP 2) pprovals: No options (UL, ULc, by default) Standard MLF product offering represents to 6 weeks delivery time L) Subject to export regulations L: N, N: 3991X /320 Siemens FI

4 Siemens G 2011 Flow Measurement SITRNS F US lamp-on Number of channels/ultrasonic paths Single channel 1 ual channel/ual path 2 L) 7M3510- Standard flowmeter types and I/O configurations Standard I/O - Reflexor capable - Graphic display - 2 x V -2x...20 m - 2 x pulse outputs - x status logic - 2 x m analog in - 1 x RT per channel Sensor cables (select proper quantity of active channels) No sensor cable IP67 (weatherproof) only 1 x PV-jacket, length 6 m (20 ft) (for IP67 NM 6) 2) 2 x PV-jacket, length 6 m (20 ft) (for IP67 NM 6) 2) 1 x PV-jacket, length 15 m (50 ft) (for IP67 NM 6) 2) 2 x PV-jacket, length 15 m (50 ft) (for IP67 NM 6) 2) RT temperature sensor (for type 3 meter only, mounting hardware and cable included) No RTs 0 IP67 (weatherproof) only 1 x standard clamp-on RT (NM 6) with 6 m (20 ft) cable 1) 5 2 x standard clamp-on RT (NM 6) with 6 6 m (20 ft) cable 1) 1 x standard clamp-on RT (NM 6) with 7 15 m (50 ft) cable 1) 2 x standard clamp-on RT (NM 6) with 8 15 m (50 ft) cable 1) attery charger options no battery charger 0 harger Type for urope (7/7) 1 harger Type for ustralia (S3112) 2 harger Type for U.K. (S1363) 3 harger Type J for Japan (JIS8303) harger Type G for U.S. (NM 5-15P) 5 harger Type L for Switzerland (SV1011) 6 L) 7M3510- Sensor for channel 1 Including pipe mounting tracks for sizes & sensors indented for pipe with a O less than 125 mm (5") and mounting frame/spacer bars for sizes, & sensors. Straps provided are for the indicated maximum O listed below. Strap kits are available to accommodate larger pipes (refer to spare part list). Refer to "Sensor Selection harts" for the sensor suitability of pipe size and wall thickness. no sensor 2 universal Trackmount and straps 3 universal Trackmount and straps 3 universal Mounting frame and 300 mm (13 ) 3 universal Mounting frame and 2 universal Mounting frame and F For the following 1H to H sensors, temperature range is -0 to 65 (-1 F to 150 F), nominal 21 (70 F): 2H (high precision) Trackmount and straps H 3H (high precision) Trackmount and straps J 1H (high precision) Trackmount and straps K 2H (high precision) Trackmount and straps L 125 mm (5) 1H (high precision) Mounting frame and M 2H (high precision) Mounting frame and N 1H (high precision) Mounting frame and P 2H (high precision) Mounting frame and Q H (high precision) Mounting frame and R oppler to 12 with chain kit S High temperature sensor size 2 for Z P 1 up to 230 (6 F) (30 to 200 mm diam. (1.18 to 7.67 inch diam.)) High temperature sensor size 3 for Z P 1 up to 230 (6 F) (150 to 610 mm diam. (5.90 to 2 inch diam.)) High temperature sensor size for Z P 1 up to 230 (6 F) (00 to 1200 mm diam. (15.75 to 7.25 inch diam.)) L) Subject to export regulations L: N, N: 3991X Siemens FI /321

5 Flow Measurement SITRNS F US lamp-on Siemens G 2011 Sensor for channel 1 (continued) L) 7M3510- For the following 1H to H sensors, temperature range is -1 up to 10 (30 F up to 220 F), nominal 65 (150 F): 1H (high temperature range HP) Z P 1 K 2H (high temperature range HP) Z P 1 L 1H (high temperature range HP) Z P 1 M 2H (high temperature range HP) Z P 1 N 1H (high temperature range HP) Z P 1 P 2H (high temperature range HP) Z P 1 Q H (high temperature range HP) Z P 1 R Sensor for channel 2 (includes pipe mounting kit and spacer bar for indicated max. outer diameter listed) See "Sensor selection charts" for specifications. no sensor 2 universal Trackmount and straps 3 universal Trackmount and straps 3 universal Mounting frame and 300 mm (13 ) 3 universal Mounting frame and 2 universal Mounting frame and F For the following 1H to H sensors, temperature range is -0 to 65 (-1 F to 150 F), nominal 21 (70 F): 2H (high precision) Trackmount and straps H 3H (high precision) Trackmount and straps J 1H (high precision) Trackmount and straps K 2H (high precision) Trackmount and straps L 125 mm (5") 1H (high precision) Mounting frame and M 2H (high precision) Mounting frame and N 1H (high precision) Mounting frame and P 2H (high precision) Mounting frame and Q H (high precision) Mounting frame and R oppler to 12 with chain kit S Sensor for channel 2 (continued) High temperature sensor size 2 for up to Z Q (6 F) (30 to 200 mm diam. (1.18 to 7.67 inch diam.)) High temperature sensor size 3 for up to Z Q (6 F) (150 to 610 mm diam. (5.90 to 2 inch diam.)) High temperature sensor size for up to Z Q (6 F) (00 to 1200 mm diam. (15.75 to 7.25 inch diam.)) For the following 1H to H sensors, temperature range is -1 up to 10 (30 F up to 220 F), nominal 65 (150 F): 1H (high temperature range HP) Z Q 1 K 2H (high temperature range HP) Z Q 1 L 1H (high temperature range HP) Z Q 1 M 2H (high temperature range HP) Z Q 1 N 1H (high temperature range HP) Z Q 1 P 2H (high temperature range HP) Z Q 1 Q H (high temperature range HP) Z Q 1 R pprovals: No options (UL, ULc, by default) ( F) ( F) L) Subject to export regulations L: N, N: 3991X. Selection and Ordering data ) Subject to export regulations L: N, N: R99H. L) 7M3510- Order No. Operating Instructions for SITRNS FUP1010 nglish IP67 Weatherproof ) German IP67 Weatherproof ) This device is shipped with a Quick Start Guide and a containing further SITRNS F literature. ll literature is also available for free at: /322 Siemens FI

6 Siemens G 2011 Flow Measurement SITRNS F US lamp-on Selection and Ordering data Further designs Please add "-Z" to Order No. and specify Order code(s). Languages (Meter and ocumentation), nglish (default). ll languages now come standard in all flowmeters Wet flow transfer calibration (priced on request) 6 point calibration 2/water (Price per channel) 2SS0 pipe 3S0 pipe S0 pipe SS0 pipe 6S0 pipe 6SS0 pipe 6S120 pipe 8S0 pipe 8SS0 pipe 8S120 pipe 10S Standard pipe 10S0 pipe 10SS0 pipe 12S Standard pipe 12S0 pipe 1S30 pipe 1S0 pipe 16S Standard pipe 16S0 pipe 18S Standard pipe 20S20 pipe 20S30 pipe 2S Standard pipe 2S20 pipe 2S30 pipe 30S Standard pipe 36S Standard pipe Other pipe, other liquid, additional points, witness 1x Insertion RT with thermowell and lagging 2x Insertion RT with thermowell and lagging Tag name plate Stainless steel tag with 3.2 mm (0.13 inch) character size (68 characters max.) Order code Y28 M1 M1 Y19 1) Supplied spacer bar supports pipes up to 1050 mm (2 inches). For pipes larger than 1050 mm (2 inches) purchase also, spare part 7M3960-0MS0 (1012N-). 2) Supplied spacer bar supports pipes up to 750 mm (30 inches). For pipes larger than 750 mm (30 inches) purchase also, spare part 7M3960-0MS0 (1012N-). MLF example pplication example general survey portable flowmeter is required for pipes sizes ranging from mm (3"... 20") with both cast iron and steel material. oppler may be required as liquid may be moderately aerated. Requires language support for German. MLF Order No.: 7M Z 10 SITRNS FUP1010 meter 7 M family IP67 weatherproof 1 ual channel 2 Portable Type 3 I/O with oppler capable, temperature 1 x PV-Jacket, length 6 m (20 ft) No RTs required 0 harger Type for urope 1 (7/7) Sensor for N N 300 ( ) pipes Sensor for N N 600 ( ) pipes German language support 1 0 Universal sensor selection chart ased on pipe size (pipes other than steel) Pipe size Order Outer diameter ode range (mm) Outer diameter range (inches) min. max. min. max. 2 12,7 50, F High precision sensor selection chart ased on pipe wall thickness (steel pipes only) Pipe Wall Order Pipe Wall [mm] Pipe Wall [inches] ode min. max. min. max. 1H G 0,6 1, H H 1,02 1, H J 1,52 2, H K 2,03 3, H L 3,05, H M,06 5, H N 5,8 8, H P 8,13 11, H Q 11,18 15, H R 15,75 31, Siemens FI /323

7 Flow Measurement SITRNS F US lamp-on SITRNS FUP1010 Water and Liquid check metering kits Siemens G 2011 Overview There are two check kits available: SITRNS FUP1010 Water check metering kit for water and wastewater applications, and SITRNS FUP1010 Liquid check metering kit for liquid applications other than water. The kits have been developed especially for verifying the accuracy and performance of any brand or type of flowmeter. They can be used to verify the performance of meters based on any existing flow measurement principle: orifice, electromagnetic, ultrasonic, rotary piston, coriolis, etc. In addition, they measure practically all conductive or non-conductive clean or moderately aerated liquids or liquids with suspended solids. enefits Performance check or verification of any type or brand of flowmeter Field use is facilitated by meter portability and 7 hours or normal battery operation. Weatherproof enclosure withstands even severe weather conditions 1 Myte datalogger capability downloadable to P via included RS232 cable Fast, easy and cost-efficient on-site measurement of any convoluted pipe from 20 to 1200 mm (0.75 to 8 ) elivered as an all inclusive kit in a sturdy rolling case that holds all the equipment needed to conduct performance and verification tests (cables, multiple sensors, flow transmitter etc.) pplication The SITRNS FUP1010 Water and Liquid heck Metering Kits measure practically all conductive or non-conductive clean or moderately aerated liquids or liquids with suspended solids.this basic feature enables the performance check and verification of existing meters used in various water and wastewater applications such as: Raw Water and sewage Potable water hemicals ffluent and sludges Process control atching Rate indication Hot and cold water systems esign IP67 weatherproof/impact resistant enclosure, constructed of mineral reinforced copolymer polypropylene Single channel Function Integral 33 button keypad and large (128 x 20 pixel) graphic display visible up to 12 m (0 ft) away urrent, voltage, frequency and RS232 outputs (see Technical specification section for details) Optional current, voltage and temperature inputs (see specification section for details) ZeroMatic Path automatically sets zero i-directional flow operation 1 Myte data logger with both site and data logger storage nglish, Spanish, German, Italian and French language options Technical specifications Pipe sizes Water heck Metering Kit mm ( ) Liquid heck Metering Kit mm ( ) ccuracy ±0.5 %... ±2.0 % of flow rate Flow range 12 m/s (0 ft/s) bidirectional Media temperature ( F) nclosure ratings IP67 (Weatherproof) See page /319 for complete technical specifications erificates and approvals Unclassified locations UL ULc lassified locations MV irective 200/108/ TX irective 9/9/ /32 Siemens FI

8 Siemens G 2011 Flow Measurement SITRNS F US lamp-on SITRNS FUP1010 Water and Liquid check metering kits Selection and Ordering data Order No. SITRNS FUP1010 Water heck Metering Kit QO:FUPW-WWKIT ) ontent of delivery 1 Single channel portable submersible flow transmitter 1 pair Universal sensor 3 1 pair Universal sensor 2 1 pair oppler sensors 1 pair Mounting zclamp (2 mounting zclamp chains) 1 Ladder chain 1 attery charger 1 pair 20 ft sensor cable 1 able WP/WP to P 1 PinStop spacer bar (universal) 1 Flow case 1 Flowmeter manual 1 Laminated card set 1 ertificate of intrinsic calibration Selection and Ordering data Order No. SITRNS FUP1010 Liquid heck Metering Kit QO:FUS-LIQKIT ) ontent of delivery 1 Single channel portable submersible transmitter 1 pair Universal sensor 3 1 pair Universal sensor 3 1 pair Universal sensor 3 1 pair Universal sensor 2 1 pair oppler sensors 1 pair Sensor cables 6m (20 ft) 1 pair Mounting track 1 pair Mounting zclamp 1 Spacer bar (portable) 1 Ladder chain 1 attery charger 1 RS232 cable for P connection 1 Flow case 1 lamp-on flowmeter manual 1 Flowmeter manual 1 Laminated card set 1 ertificate of intrinsic calibration ) Subject to export regulations L: N, N: R99H. Siemens FI /325