Level Measurement Point level measurement - Vibrating switches
|
|
- Penelope Townsend
- 6 years ago
- Views:
Transcription
1 Siemens G 2018 SITRNS LVS200 Overview SITRNS LVS200 is a vibrating point level switch for high, low, or demand level detection of bulk solids. enefits High resistance to mechanical forces Strong vibration resistance to high bulk material loads Rotatable enclosure for convenient wiring Suitable for low density material: standard version, 20 g/l (1.3 lb/ft 3 ); liquid/solid interface version, 50 g/l (3 lb/ft 3 ) and low density option min. 5 g/l (0.3 lb/ft 3 ) ustomer desired extensions up to mm (787 inch) Optional detection of solids within liquid urable short fork option with 165 mm (6.5 inch) insertion length pplication The standard LVS200 detects high, low, or demand levels of dry bulk solids in bins, silos, or hoppers. The liquid/solid interface version can also detect settled solids within liquids or solids within confined spaces such as feed pipes. It is designed to ignore liquids in order to detect the interface between a solid and a liquid. pipe extension version is available with either the standard or liquid/solid interface electronics and fork, separated by a customer supplied 1 inch pipe. SITRNS LVS200 has an optional to 20 m output for monitoring buildup on the fork to determine when preventative maintenance should be performed in sticky applications. The LVS200 has a compact design and can be top, side or angle mounted. The vibrating fork design ensures the tines are kept clean. The unique design of the fork and crystal assembly eliminates false high level readings even if tines become damaged. signal from the electronic circuit excites a crystal in the probe causing the fork to vibrate. If the fork is covered by material, the change in vibration is detected by the electronic circuitry which causes the relay to change state after a one second delay. When the fork is free from material pressure, full vibration resumes and the relay reverts to its normal condition. Key pplications: dry bulk solids in bins, silos, hoppers or settled solids within liquids (interface version) Siemens I 01 Update 12/2017 /91
2 Siemens G 2018 SITRNS LVS200 Technical specifications Mode of operation Measuring principle Vibrating point level switch Input Measured variable High, low, and demand Measuring frequency Standard 125 Hz Liquid/solid interface and short fork 350 Hz version Output PNP Open collector: Permanent load max. 0., short-circuit and overload protected Turn-on voltage: max. 50 V (reverse protection) 2-wire without contact Load current: Min. 10 m Max. 500 m permanent Max. 2 < 200 ms Max. 5 < 50 ms Voltage drop on the electronic module: max. 7 V with closed electric circuit ut-off current with open electric circuit: max. 5 m Relays Version with 1 relay SPT relay Version with 2 relays PT relay Relay delay rom loss of vibration: approximately 1 second rom resumption of vibration: approximately seconds Signal delay Probe uncovered to covered: approximately 1 second Probe covered to uncovered: approximately seconds Relay fail-safe High or low, switch selectable larm output Relay 8 at 250 V, non-inductive Relay 5 at 30 V, non-inductive m output 8/16 m or m Resolution m ± 0.1 m Sensitivity High or low, switch selectable Rated operating conditions Installation conditions Location Indoor/outdoor mbient conditions mbient temperature ( ) Installation category III Pollution degree 2 Medium conditions Process temperature ll except S lass II, Group G: ( ) S lass II, Group G: ( ), S temperature code T3 Max. threaded bushing temperature 60 (10 ) Max. enclosure surface temperature 90 (19 ) (ategory 2) Max. extension surface temperature 150 (302 ) (ategory 1) Pressure (vessel) Max. 10 bar g (15 psi g) uropean Pressure irective 201/68/U: ategory 1 Minimum material density Standard version: approx. 20 g/l (1.2 lb/ft 3 ) Liquid/solid interface version: approx. 50 g/l (3 lb/ft 3 ) Optional low density version: approx. 5 g/l (0.3 lb/ft 3 ) esign Material nclosure poxy coated aluminum Process connection Thread 1½" NPT [(Taper), NSI/SM ], R ½" [(SPT), N 10226], and flange options Optional sliding bushing with 2" NPT [(Taper), NSI/SM ] or SP thread Thread material: stainless steel 303 (1.301) Tine material Stainless steel 316L (1.0), PT-coated tines are available upon special request egree of protection IP65/Type /NM onduit entry 2 x M20 x 1.5 or 2 x ½" NPT Weight Standard version, no extensions: approx. 2.0 kg (. lb) Solids/liquids version, no extensions: approx. 1.9 kg (.2 lb) Power supply V, +10 %, Hz, 8 V V, +10 %, 1.5 W ertificates and approvals S/M General Purpose S/M ust Ignition Proof RM TX II 1/2 S/M IS lass I, II, III iv. 1, Groups,,,,,, G, M lass I, ex ia II, S lass I, x ia II, available only with power supply options 5 and 6 TX II 1G and 1/2 G ex ia II; TX II 1 and 1/2, available only with power supply option 5 /92 Siemens I 01 Update 12/2017
3 Siemens G 2018 SITRNS LVS200 rticle No. SITRNS LVS200, standard 7ML5731- SITRNS LVS200 is a vibrating point level switch for high, low, or demand level detection of bulk solids. lick on the rticle No. for the online configuration in the PI Life ycle Portal. Power supply V, V, one relay output 1 (SPT) 1) V, V, two relay outputs 2 (PT) 1) V PNP 1) V / without contact, 2-wire loop powered 1) V (requires NMUR switch amplifier) 5 NMUR I , 2-wire 2) 8/16 m or m; V, 2-wire 3) V, V, one relay output 7 (SPT) basic version )5) Process temperature Without temperature isolator With temperature isolator Separated enclosure - cable length 1.5 m (.92 ft) [max. temperature process 150 (302 )/ max. temperature electronics 60 (10 )] Separated enclosure - cable length.0 m (13.12 ft) [max. temperature process150 (302 )/ max. temperature electronics 60 (10 )] Process connection Threaded R 1½" [(SPT), N 10226] 1½" NPT [(Taper), NSI/SM ] G 2" [(SPP), N ISO 228-1], sliding sleeve [min. length 500 mm (19.69 inch)] 6) 2" NPT [(Taper), NSI/SM ], sliding sleeve [min. length 500 mm (19.69 inch)] 6) langed N 100 PN 6, N ) N 100 PN 16, N " SM 150 lb 16.5 G 3" SM 150 lb 16.5 H " SM 150 lb 16.5 J 2" Tri-clamp (N 50) ISO 2852 K xtension length Stainless steel 30 (1.301) Standard length, 235 mm (9.25 inch) 1 1 dd Order code Y01 and plain text: "Insertion length... mm" mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) 2 8 rticle No. SITRNS LVS200, standard 7ML5731- SITRNS LVS200 is a vibrating point level switch for high, low, or demand level detection of bulk solids. Stainless steel 316L (1.0) Standard length, 235 mm (9.25 inch) 3 1 dd Order code Y01 and plain text: "Insertion length... mm" mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) 8 Material process connection/extension Stainless steel threads 30 (1.301), flanges 321 (1.51), Tri-clamp 30 (1.301) 8) 1 Stainless steel 316L (1.0) 9) 2 pprovals S/M ust Ignition Proof, RM TX II 1/2, RM S/M General Purpose, RM,, RM S/M IS lass I, II, III iv. 1, Groups,,,,,, G, M lass I, ex ia II, S lass I, x ia II, RM TX II 1G and 1/2G ex ia II; TX II 1 and 1/2, RM I-x t III a/b G x ta/tb III a/b, x ta III a H x Ga/Gb x ia II, 0x ia II Ga; x ta/tb J III a/b, x ta III a 1) vailable with pproval options..., G only. 2) vailable with pproval options,, only. 3) vailable with pproval options,, G only. ) vailable with configurations 7ML or 7ML only. 5) asic version is cost effective and offers fast delivery. 6) Not available with extension length options 11, 12, 31, 32. 7) Max. 6 bar (87 psi). 8) vailable with option extension length ) vailable with option extension length Siemens I 01 Update 12/2017 /93
4 Siemens G 2018 SITRNS LVS200 urther esigns Please add "-Z" to rticle No. and specify Order code(s). Total insertion length: nter the total insertion length in plain text description, max. 000 mm (157.8 inch) Stainless steel tag [100 x 5 mm (3.9 x 1.77 inch)]: Measuring-point number/identification (max. 27 characters); specify in plain text nhanced sensitivity > 5 g/l via electronics and increased insertion length of 25 mm (0.98 inch) 3) nhanced sensitivity < 5 g/l via electronics, increased insertion length of 25 mm (0.98 inch), and increased aluminum fork width 1)3) Signal bulb inserted in M20 cable gland 2) NMUR 8/16 m switch amplifiers available, contact factory for pricing Operating Instructions Multi-language Note: the Operating Instructions should be ordered as a separate line on the order. ll literature is available to download for free, in a range of languages, at processinstrumentation/documentation Spare Parts [ V, V, one relay output (SPT)] [ V, V, two relay output (PT)] Sliding sleeve, 2" SP (ISO 228) Sliding sleeve, 2" NPT (SM ) Namur Isolator switch amplifier relay output K2-SR2-x1.W vailable ex stock or details see page 10/11 in the appendix. SITRNS LVS200, standard, power supply 7, process temperature, process connection, extension length 11, material process connection/extension 1, and approval SITRNS LVS200, standard, power supply 7, process temperature, process connection, extension length 11, material process connection/extension 1, and approval Order code Y01 Y1 K05 G ) vailable only with power supply 1 and pproval, and with Process connection flange... J. 2) vailable with pproval option only. 3) K05 and G01 are not available together. rticle No. 7ML1998-5T63 7ML1830-1KL ML1830-1JM 7ML1830-1JN ML ML rticle No. SITRNS LVS200, short fork for liquids/solids interface Vibrating point level switch for short insertion and 7ML liquids/solids interface applications as well as high load applications with short insertion requirements. lick on the rticle No. for the online configuration in the PI Life ycle Portal. Power supply V, V, one relay output (SPT) 6) V, V, two relay outputs (PT) 6) V PNP 6) V / without contact, 2-wire loop powered 6) 8/16 m or m; V, 2-wire 1) 5 Process temperature Without temperature isolator With temperature isolator Separated enclosure - cable length 1.5 m (.92 ft) [max. temperature process 150 (302 )/ max. temperature electronics 60 (10 )] Separated enclosure - cable length.0 m (13.12 ft) [max. temperature process 150 (302 )/max. temperature electronics 60 (10 )] Process connection Threaded R 1½" [(SPT), N 10226] 1½" NPT [(Taper), NSI/SM ] G 2" [(SPP), N ISO 228-1], sliding sleeve [min. length 500 mm (19.69 inch)] 2) 2" NPT [(Taper), NSI/SM ], sliding sleeve [min. length 500 mm (19.69 inch)] 2) langed N 100 PN 6, N ) N 100 PN 16, N " SM 150 lb 16.5 G 3" SM 150 lb 16.5 H " SM 150 lb 16.5 J 2" Tri-clamp (N 50) ISO 2852 K xtension length Stainless steel 30 (1.301) Standard length, 165 mm (6.50 inch) 1 1 dd Order code Y01 and plain text: "Insertion length... mm" mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) 2 8 /9 Siemens I 01 Update 12/2017
5 Siemens G 2018 SITRNS LVS200 rticle No. SITRNS LVS200, short fork for 7ML5732- liquids/solids interface Vibrating point level switch for short insertion and liquids/solids interface applications as well as high load applications with short insertion requirements. Stainless steel 316L (1.0) Standard length, 165 mm (6.50 inch) 3 1 dd Order code Y01 and plain text: "Insertion length... mm" mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) 8 Material process connection/extension Stainless steel threads 30 (1.301), 1 flanges 321(1.51), Tri-clamp 30 (1.301) ) Stainless steel 316L (1.0) 5) 2 pprovals S/M ust Ignition Proof, RM TX II 1/2, RM S/M General Purpose, RM,, RM I-x t III a/b TX II 1G and 1/2G ex ia II; TX II 1 and 1/2,, RM x ta/tb III a/b, x ta III a G x Ga/Gb x ia II, 0x ia II Ga; x ta/tb III H a/b, x ta III a 1) vailable with pproval options,, only. 2) Not available with extension length options 11,12, 31, 32. 3) Max. 6 bar (87 psi). ) vailable with option extension length ) vailable with option extension length ) Power supply options 1, 2, 3, not allowed with pprovals options and H. urther esigns Please add "-Z" to rticle No. and specify Order code(s). Total insertion length: nter the total insertion length in plain text description, max. 000 mm (17.8 inch) Stainless steel tag [100 x 5 mm (3.9 x 1.77 inch)]: Measuring-point number/identification (max. 27 characters); specify in plain text Signal bulb inserted in M20 cable gland 1)3) Note: G02 must be ordered for solids/liquids interface detection. djustable sensitivity (by potentiometer) for solids/liquids interface detection 1)2)) Operating Instructions Multi-language Note: the Operating Instructions should be ordered as a separate line on the order. ll literature is available to download for free, in a range of languages, at processinstrumentation/documentation Spare Parts [ V, V, two relay output (PT)] Replacement lectronics Module (350 Hz) [ V, V, one relay output (SPT)] Sliding sleeve, 2" SP (ISO 228) Sliding sleeve, 2" NPT (SM ) Order code Y01 Y1 20 G02 1) vailable with pproval option only. 2) vailable with power supply option 1 only. 3) 20 not allowed with power supply options or 5. ) G02 not allowed with process temperature options or. rticle No. 7ML1998-5T ML1830-1KM 7ML1830-1JM 7ML1830-1JN Siemens I 01 Update 12/2017 /95
6 Siemens G 2018 SITRNS LVS200 rticle No. SITRNS LVS200, pipe extension 7ML5733- Vibrating point level switch for high or low levels of bulk solids xtended using 1" pipe extension (customer supplied) lick on the rticle No. for the online configuration in the PI Life ycle Portal. Power supply V, V, one relay output 1 (SPT) 1) V, V, two relay outputs 2 (PT) 1) V PNP 1) V / without contact, 2-wire loop powered 1) V (requires NMUR switch amplifier) 5 NMUR I , 2-wire 2) 8/16 m or m; V, 2-wire 3) 6 Process temperature Up to 150 (302 ) Process connection Threaded R 1½" [(SPT), N 10226] 1½" NPT [(Taper), NSI/SM ] langed N 100 PN 6, N ) N 100 PN 16, N " SM 150 lb " SM 150 lb 16.5 " SM 150 lb 16.5 G 2" Tri-clamp (N 50) ISO 2852 K Process connection material Stainless steel threads 30 (1.301), 1 flanges 321 (1.51), Tri-clamp 30 (1.301) Stainless steel 316L (1.0) 2 xtension length ustomer supplied 1" pipe extension 1 Length: mm ( inch) pplication type ry bulk solids (125 Hz) 1 Liquids/solids interface (350 Hz) 2 pprovals S/M ust Ignition Proof, RM TX II 1/2, RM S/M General Purpose, RM,, RM S/M IS lass I, II, III iv. 1, Groups,,,,,, G, M lass I, ex ia II, S lass I, x ia II, RM TX II 1G and 1/2G ex ia II; TX II 1 and 1/2, RM I-x t III a/b G x ta/tb III a/b, x ta III a H x Ga/Gb x ia II, 0x ia II Ga; x ta/tb III J a/b, x ta III a 1) vailable with pproval options,,,, G only. 2) vailable with approval options,, J and application type 1 only. 3) vailable with pproval options,, G only. ) Max. 6 bar (87 psi). urther esigns Please add "-Z" to rticle No. and specify Order code(s). Total insertion length: nter the total insertion length in plain text description, max mm (19.61 inch) Stainless steel tag [100 x 5 mm (3.9 x 1.77 inch)]: Measuring-point number/identification (max. 27 characters); specify in plain text nhanced sensitivity > 5 g/l via electronics and increased insertion length of 25 mm (0.98 inch) 5) nhanced sensitivity < 5 g/l via electronics, increased insertion length of 25 mm (0.98 inch) and increased aluminum fork width 1))5) djustable sensitivity (by potentiometer) for solids/liquids interface detection 2)3)) Signal bulb inserted in M20 cable gland 2)6) Operating Instructions Multi-language Note: the Operating Instructions should be ordered as a separate line on the order. ll literature is available to download for free, in a range of languages, at processinstrumentation/documentation Spare Parts [ V, V, one relay output (SPT)] [ V, V, two relay output (PT)] Replacement lectronics Module (350 Hz) [ V, V, one relay output (SPT)] NMUR Isolated switch amplifier Relay output K2-SR2-x1.W Order code Y01 Y1 K05 G01 G02 20 rticle No. 7ML1998-5T63 7ML1830-1KL ML1830-1KM ) vailable only with power supply 1 and pprovals,, and with Process connection flange G. 2) vailable with approval options only. 3) vailable with power supply option 1 only and application type 2. ) Not available with option K05. 5) vailable with pplication type 1 only. 6) 20 not allowed with power supply options, 5, and 6. /96 Siemens I 01 Update 12/2017
7 Siemens G 2018 SITRNS LVS200 rticle No. SITRNS LVS200, cable extended Vibrating point level switch for high or low level detection of bulk solids materials 7ML lick on the rticle No. for the online configuration in the PI Life ycle Portal. Power supply V, V, one relay output (SPT) 1) V, V, two relay outputs (PT) 1) V PNP 1) V / without contact, 2-wire loop powered 1) V (requires NMUR switch amplifier) NMUR I , 2-wire 2)5) 5 8/16 m or m; V, 2-wire 3) 6 Process temperature Up to 80 (176 ) Process connection Threaded R 1½" [(SPT), N 10226] (1.301/30) 1½" NPT [(Taper), NSI/SM ] (1.301/30) langed N 100 PN 6, N (1.51/321) ) N 100 PN 16, N (1.51/321) 2" SM 150 lb 16.5 (1.51/321) 3" SM 150 lb 16.5 (1.51/321) " SM 150 lb 16.5 (1.51/321) G xtension length mm ( inch) [max. length mm (787. inch), not with Power supply option 5 (max mm, inch)] 8) dd Order code Y01 and plain text: "Insertion length... mm" mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) mm ( inch) 5) mm ( inch) 5) mm ( inch) 5) mm ( inch) 5)6) mm ( inch) 5)6) mm ( inch) 5)6) mm ( inch) 5)6) mm ( inch) 5)6) mm ( inch) 5)6) mm ( inch) 5)6) mm ( inch) 5)6) mm ( inch) 5)6) mm ( inch) 5)6) 3 1 pplication type ry bulk solids (125 Hz) 1 Heavier materials and robust applications (350 Hz) 7) 2 SITRNS LVS200, cable extended Vibrating point level switch for high or low level detection of bulk solids materials pprovals S/M ust Ignition Proof, RM TX II 1/2, RM S/M General Purpose, RM,, RM S/M IS lass I, II, III iv. 1, Groups,,,,,, G, M lass I, ex ia II, S lass I, x ia II, RM TX II 1G and 1/2G ex ia II; TX II 1 and 1/2, RM 6) I-x t III a/b x ta/tb III a/b, x ta III a x Ga/Gb x ia II, 0x ia II Ga; x ta/tb III a/b, x ta III a 1) vailable with pproval options,,,, G only. 2) vailable with pproval options,, and only. Not available for application type 2 "Liquids/solids interface". 3) vailable with pproval option only. ) Max. 6 bar (87 psi). 5) Not available with application type option 2. 6) Not available with Power supply option 5. 7) able length is limited to mm ( inch). 8) vailable with power supply options 1, and 6. rticle No. 7ML G H J Siemens I 01 Update 12/2017 /97
8 Siemens G 2018 SITRNS LVS200 urther esigns Please add "-Z" to rticle No. and specify Order code(s). nter the total insertion length in plain text description, max mm (787.0 inch) Stainless steel tag [100 x 5 mm (3.9 x 1.77 inch)]: Measuring-point number/identification (max. 27 characters); specify in plain text nhanced sensitivity > 5 g/l via electronics and increased insertion length of 25 mm (0.98 inch) 5) nhanced sensitivity < 5 g/l via electronics and increased insertion length of 25 mm (0.98 inch) and increased aluminum fork width 1)) djustable sensitivity (by potentiometer) for solids/liquids interface detection 2)3)) Signal bulb inserted in M20 cable gland 2)6) Operating Instructions Multi-language Note: the Operating Instructions should be ordered as a separate line on the order. ll literature is available to download for free, in a range of languages, at processinstrumentation/documentation Spare Parts [ V, V, one relay output (SPT)] [ V, V, two relay output (PT)] Replacement lectronics Module (350 Hz) [ V, V, one relay output (SPT)] NMUR Isolated switch amplifier Relay output K2-SR2-x1.W Order code Y01 Y1 K05 G01 G02 20 rticle No. 7ML1998-5T63 7ML1830-1KL ML1830-1KM ) vailable only with power supply 1 and pprovals,, and with process connection flange G. 2) vailable with pproval options only. 3) vailable with power supply option 1 and application type 2 only. ) Not available with option K05. 5) vailable with pplication type 1 only. 6) 20 not allowed with power supply, 5, or 6. /98 Siemens I 01 Update 12/2017
9 Siemens G 2018 SITRNS LVS200 imensional drawings Tine orientation marking Threaded bushing [max. temp. 80 (176 )] 120 (.72) 150 (5.91) View - 60 (2.36) 75 (2.95) Thread length SP: 20.5 (0.81) NPT: 2 (0.9) 2 (1.67) 155 (6.1) Optional sliding bushing* ustomer supplied process flange 100 (3.9) Solids/liquids interface model ( ): ustomer-specified rigid extension 100 (3.9) Solids/liquids interface model Tine 170 (6.69): Standard model 60 (2.36) 165 (6.5): ompact solids/ liquids interface model 230 (9.0): ompact standard version (1.67) Tine 195 (7.68) 170 (6.69): Standard model ( )** Notes: * The clamping screws of the sliding bushing must be tightened to 10 Nm. ** able version with liquids/solids interface model option length to mm ( inch) able version with NMUR electronics length to mm (393.7 inch) tightened to 10 Nm. See manual for pipe extended version details. (Pipe is customer supplied.) SITRNS LVS200, dimensions in mm (inch) Siemens I 01 Update 12/2017 /99
10 Siemens G 2018 SITRNS LVS200 Schematics L SH/SL adjustment Universal voltage (PT relay) 3-wire PNP Sensitivity adjustment (=factory setting, =decreased sensitivity) SH SL larm output relay Load L N V or +/ V Protective earth terminal P + L - N Terminal 1: L, terminal 2: N V, +10 %, Hz, 18 V Terminal 1: +, terminal 2: V, +10 %, 2 W Signal output P + - Terminal 1: +, terminal 2: V, +10 %, 1.5 W 2-wire NMUR I /16 m or m P L - N Terminal 1: L, terminal 2: N V, +10 %, Hz, 1.5 V Terminal 1: +, terminal 2: V, +10 %, 1 W P L - N pprox V, intrinsically safe (I ) P L - N terminal 1: +, terminal 2: V, + 0 % SITRNS LVS200 connections /100 Siemens I 01 Update 12/2017
Level Measurement Point level measurement - Rotation paddle switches
Siemens 017 SITRNS LPS00 Overview SITRNS LPS00 is a rotary paddle switch for point level and material detection in bulk solids. enefits Proven paddle switch technology for bulk solids High integrity mechanical
More informationLevel Measurement. Point level measurement Capacitance switches. Pointek CLS200 Standard. 5/16 Siemens FI Overview.
Level Measurement Pointek LS200 Standard Siemens A 20 Overview onfiguration Installation Pointek LS200 (standard version) is a versatile inverse frequency shift capacitance level switch with optional rod/cable
More informationLevel Measurement Point level measurement - RF Capacitance switches
Pointek CLS200 - Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level and material detection switch with optional rod/cable
More informationSolids Flowmeters LVDT flowmeters
Siemens 2017 STRNS W200 series Overview pplication Operating with a microprocessor based integrator package, the W200 series flowmeters display flow rate, totalized flow, and rate alarms. Outputs are 0/4
More informationLevel Measurement Continuous level measurement - Radar transmitters
Overview Configuration Installation Note: Beam angle is the width of the cone where the energy density is half of the peak energy density Emission The peak energy density cone is directly in front of and
More informationLevel Measurement Point level measurement - Vibrating switches
Overview Configuration Horizontal mounting (recommended mounting position, particularly for adhesive applications) Vertical mounting is a compact vibrating level switch for material detection in liquid
More informationLevel Measurement. Point level measurement Capacitance switches. Pointek CLS200 Standard. 4/18 Siemens FI Overview.
Pointek CLS200 Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices liquids, solids,
More informationLevel Measurement. Point level measurement Capacitance switches. Pointek CLS200 Standard. icenta Controls Ltd
Pointek CLS200 Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices liquids, solids,
More informationLevel Measurement Continuous level measurement Ultrasonic transmitters
Siemens AG 2018 Overview Configuration ultrasonic level transmitter, ideal for level, volume, and volume flow measurements. It works with liquids, slurries, and bulk materials up to 12 m (0 ft). Benefits
More informationLevel Measurement Point level measurement - RF Capacitance switches
Pointek CLS300 - Standard Overview Configuration Installation Pointek CLS300 (standard version) is an inverse frequency shift capacitance level and material detection switch with optional rod/cable choices
More informationLevel instruments. Continuous level measurement - Capacitance transmitters SITRANS LC300. 5/262 Siemens FI Overview.
Overview Configuration is an inverse frequency shift capacitance continuous It is ideal for standard industrial applications in chemical, hydrocarbon processing, food and beverage and mining, aggregate
More informationFlow Measurement SITRANS F C
Siemens G 2014 SITRNS C Overview The main applications of the Coriolis flowmeter can be found in all industries, such as: Chemical and pharma Detergents, bulk chemicals, pharmaceuticals, acids, alkalis
More informationPoint level measurement Capacitance switches
Pointek CLS300 Standard Overview Configuration Installation Pointek CLS300 (standard version) is an inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output.
More informationLevel Measurement Point level measurement - RF Capacitance switches
Overview Configuration Installation is an inverse frequency shift capacitance level and material detection switch ideal for detecting interfaces, solids, liquids, toxic, and aggressive chemicals in critical
More informationSITRANS L Level instruments
Overview Configuration is a compact vibrating level switch for use in liquid applications such as overflow, high, low and demand applications, as well as pump protection. It is ideal for use in confined
More informationLevel instruments. Point level measurement - Vibrating switches SITRANS LVL100. 5/78 Siemens FI Horizontal mounting.
evel instruments Siemens AG 2009 Overview Configuration Horizontal mounting (recommended mounting position, particularly for adhesive applications) Vertical mounting with lower density is a compact vibrating
More informationBelt Scales Speed sensors
Overview is a low- to high-resolution shaft-driven speed sensor. Benefits Compact and economical Easy, low-cost installation Accurate belt speed detection Optional resolutions for measurement over a range
More informationProcess Protection Motion sensors
Overview MFA 4p motion failure alarm controller is a highly sensitive single setpoint motion sensor system, used with Milltronics MSP probes. Application The MFA 4p detects changes in the motion and speed
More informationProcess Protection Motion sensors
Overview MFA 4p motion failure alarm controller is a highly sensitive single setpoint motion sensor system, used with Milltronics MSP probes. Design Benefits Up to 100 mm (4 inch) gap between target and
More informationLevel Limit Switch soliphant FTM 930/931/932/ Z
Technical Infmation TI 042F/00/e Level Limit Switch soliphant FTM 930/931/932/ Z F Universal Application with Bulk Materials and Dust Ex Area Application The Soliphant has a wide range of safe applications
More informationSITRANS FX300 4/289. System Overview. Overview
Siemens G 2008 SITRNS F flowmeters Overview System Overview Version Single transmitter Dual transmitter Options Standard Pressure sensor Flange Pressure sensor and isola- Standard tion valve Sandwich vortex
More informationLevel Measurement. Point level measurement Capacitance switches. Pointek CLS300 Standard. 5/42 Siemens FI Overview.
Level Measurement Pointek CLS300 Standard Siemens AG 20 Overview Configuration Installation Pointek CLS300 (standard version) is an inverse frequency shift capacitance level switch with optional rod/cable
More informationSoliphant T FTM260. Technical Information. Level limit switch Cost-effective vibration limit switch for fine-grained solids
Technical Information Soliphant T FTM260 Level limit switch Cost-effective vibration limit switch for fine-grained solids Application Soliphant is a rugged level limit switch for use in silos containing
More informationDIAMOND POINT VIBRATING PROBES
DIAMOND POINT VIBRATING PROBES DP130 DP120 DP140 DP150 Instruction Manual Third revision, April 2016 Hycontrol Ltd., Larchwood House, Orchard Street, Redditch, Worcestershire, B98 7DP, U.K. Tel: + 44 (0)1527
More informationSTOCKTROL-H VIBRATING LEVEL SWITCH. Instruction Manual June 2002
STOCKTROL-H VIBRATING LEVEL SWITCH Instruction Manual June 2002 Safety Guidelines Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the
More informationLevel Measurement Continuous level measurement - Capacitance transmitters
Overview Probe Applications Rod version Rod version with stilling well Cable version PFA coated cable version Extended cable with rod version Conductive liquids, slurries or solids Conductive liquids or
More informationPressure Measurement Fittings
Siemens G 2018 Overview ll shut-off fittings can be secured onto walls, racks (72 mm grid) and vertical and horizontal pipes. This offers the advantage when assembling a plant that the shutoff fittings
More informationBelt Scales Speed sensors
Overview is a low- to high-resolution shaft-driven speed sensor. Benefits Compact and economical Easy, low-cost installation Accurate belt speed detection Optional resolutions for measurement over a range
More informationBelt Scales Milltronics belt scales
Overview pplication provides continuous, in-line weighing at minimal cost. The stainless steel load cells ensure long-term, consistent, reliable measurement. The modular construction and easy assembly
More informationLevel limit switch Series RF 3000 Selection list
Table of content Page Overview P2 Applications P4 ------------------------------------------------------------------------------------------------------------- RF 3100 Standard version P6 -------------------------------------------------------------------------------------------------------------
More informationLevel limit switch Series CN 4000 Selection list. Specifications 2. Applications 4
Table of contents Page Specifications 2 Applications 4 ------------------------------------------------------------------------------------------------------------ CN 4020 5 Short extension length ------------------------------------------------------------------------------------------------------------
More informationLevel Measurement. Continuous level measurement - Capacitance transmitters SITRANS LC500. 5/282 Siemens FI Overview.
SITRANS LC00 Overview Configuration Installation Build up of material or condensation in active shield area does not affect switch operation. SITRANS LC00 is an inverse frequency shift capacitance level
More informationOverview. Specifications. Applications
Vibranivo Level limit switch 1 Series VN 00 / 000 / 000 / 000 Table of content Page Overview P Specifications P Applications P ------------------------------------------------------------------------------------------------------------
More informationOPTISWITCH 4000/5000. Vibration level switches for liquids
OPTISWITCH 4000/5000 Technical Datasheet Vibration level switches for liquids Operates up to 250 C / 480 F and 64 bar / 925 psi Pump dry-run detection High reliability due to permanent fault monitoring
More informationFlow Measurement SITRANS F US Clamp-on
Siemens G 2017 SITRS US lamp-on Overview SITRS U1010 clamp-on non-intrusive ultrasonic flow transmitter offers maximum versatility plus battery power for portable field use. It can operate in either Wideeam
More informationSITRANS F flowmeters SITRANS F C SITRANS F C MC2 4/169. Overview
Siemens G 2009 SITRNS flowmeters SITRNS C SITRNS C MC2 Overview SITRNS C MC2 is available as a standard version (DN 50 to DN 150 (2 to 6 )) and a hygienic, EHEDG-certified version (DN 20 to DN (¾ to 3
More informationFlow Measurement. SITRANS F US Clamp-on. SITRANS FUP1010 (Portable) 4/318 Siemens FI Overview
Flow Measurement SITRNS F US lamp-on Siemens G 2011 Overview SITRNS FUP1010 clamp-on non-intrusive ultrasonic flow transmitter offers maximum versatility plus battery power for portable field use. It can
More informationContinuous level measurement Capacitance transmitters
Siemens AG 2011 Level Measurement SITRANS LC00 Overview Configuration Installation Build up of material or condensation in active shield area does not affect switch operation. SITRANS LC00 is an inverse
More informationProcess Protection Motion sensors
Overview MFA 4p motion failure alarm controller is a highly sensitive single setpoint motion sensor system, used with Milltronics MSP probes. Application The MFA 4p detects changes in the motion and speed
More informationSITRANS F C. Flow sensor MC2 4/193. Overview
Siemens G 2011 low Measurement SITNS C Overview The main applications of the Coriolis flowmeter can be found in all industries, such as: Chemical and pharma Detergents, bulk chemicals, pharmaceuticals,
More informationContinuous level measuring system. LevelMax. Selection Guide. Overview 2
Table of contents Page Overview 2 ------------------------------------------------------------------- Specification / application 3 ------------------------------------------------------------------- 4
More informationLevel Limit Switch soliphant II FTM 30 (D/S), FTM 31 (D/S), FTM 32 (D/S)
Technical Information TI 9F/00/en Level Limit Switch soliphant II FTM 0 (D/S), FTM (D/S), FTM (D/S) Universal vibration limit switch for fine-grained bulk solids Suitable for dust explosion hazardous areas
More informationFlow Measurement SITRANS F M
Overview The electromagnetic sensor MAG 1100 F is designed to meet applications in the food and beverage industry. Benefits sizes: 10 to 100 (/8 to 4 ) AISI 16 stainless steel enclosure : Hygienic connection,
More informationMotion sensors. Milltronics MFA 4p 6/17. Overview
Siemens AG 2013 Overview MFA 4p motion failure alarm controller is a highly sensitive single setpoint motion sensor system, used with Milltronics MSP probes. Application The MFA 4p detects changes in the
More informationFlow Measurement SITRANS F M
Overview The electromagnetic sensor MAG 1100 F is designed to meet applications in the food and beverage industry. Benefits sizes: 10 to 100 (/8 to 4 ) AISI 16 stainless steel enclosure : Hygienic connection,
More informationFlow Measurement SITRANS F C
Overview Benefits It is compact and light, fitting neatly into dense piping arrangements Effective separation of measurement from plant vibration Reliable measurements due to high signal to noise ratio
More informationZ4-Series DREXELBROOK DATA SHEET. Easy-Installation. Z-tron IV Point Level Switch, a reliable low-cost, on/off level switch.
DREXELBROOK DATA SHEET Easy-Installation One-piece unit is easily installed through a single 3/4-inch, probe dependent vessel opening. Calibration is quick and simple. Z-tron IV Point Level Switch, a reliable
More informationSITRANS F C MASSFLO Practical examples of ordering. MASS2100 & MASS6000 IP67 Compact mounted
SITRNS F C MSSFLO MSS2100 & MSS6000 IP67 Compact mounted Mass 2100 sensor DI 3 - DI 40 MSS 6000 IP67 transmitter. Use ordering code FI 01 Catalogue p. 4/140 MSS system: 7ME4100-2EC21-2D1 FI 01 catalogue
More informationFlow Measurement SITRANS F C
Flow sensor SITRNS FCS200 Overview Function The flow measuring principle is based on the Coriolis effect. See "System information ". Integration The complete flowmeter consists of the sensor (SITRNS FCS200)
More informationSoliphant II FTM30(D/S)/31(D/S)/32(D/S)
Technical Information Soliphant II FTM0(D/S)/(D/S)/2(D/S) Level Limit Switch Universal vibration limit switch for fine-grained bulk solids Suitable for dust explosion hazardous areas Application Soliphant
More informationR F C a p a c i t a n c e TrueCap
TrueCap RF Capacitance Point Level Sensors Extensive Product Line for Bulk Solid Applications Superior Sensitivity of 0.5pF is Standard Maximum Reliability and Calibration Stability Automatic Material
More informationContinuous level measuring system NB 3000 Selection list
Table of contents Page Overview 2 ------------------------------------------------------------------------------------------------------------------- Specifications 3 -------------------------------------------------------------------------------------------------------------------
More informationFood & beverage. Oil & gas. Water & waste water
Overview MSS 2100 MC1 DN 50 to DN 150 (2 to 6 ) are suitable for accurate mass flow measurement for all kind of liquids and gases. The sensor offers superior performance in terms of flow accuracy, turn-down
More informationAssembly. 1 Compact version with valve plug 2 Short tube version with cable 3 Compact version with M12 plug 4 Short tube version with M12 plug
Vibration Limit Switch Features Limit switch for liquids External function test with test magnet Onsite function check possible thanks to LED indication Large selection of process connections for hassle-free
More informationSoliswitch FTE20. Technical Information. Point level switch for granular solids
Technical Information Point level switch for granular solids Applications The is a paddle switch for granular solids. Its robust and compact design makes the point level switch an ideal sensor for detecting
More informationClass 1 as per EN o C to 65o C 15 kg/cm2 ( without thermowell ) 120 % of Full Scale 8 mm ½ BSP (M) Adjustable
Special Features & tex approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil filled (optional) Standard followed EN 90. pplication
More informationLevel Limit Switch liquiphant FTL 365 / FTL 366
Technical Information TI 86F/00/en Level Limit Switch liquiphant FTL 65 / FTL 66 Level limit switch Liquiphant II with vibrating probe. For all types of liquid. With explosionproof housing for use in hazardous
More informationROTARY Point Level Measurement for Inventory Control
Measure. Detect. Alert. ROTARY Point Level Measurement for Inventory Control Detect high and low levels while protecting valuable inventory with tried-and-true rotary level indicators from BinMaster. Made
More informationCVR-625. Compact Vibrating Rod Instruction Manual
CVR-625 Compact Vibrating Rod Instruction Manual BinMaster: Division of Garner Industries 7201 N. 98th St., Lincoln, NE 68507 402-434-9102 email: info@binmaster.com www.binmaster.com OPERATING INSTRUCTIONS
More informationSITRANS F flowmeters SITRANS F C
SITRNS F flowmeters Siemens G 2008 Overview is available as a standard version (DN 50 to DN 150 (2 to 6 )) and a hygienic, EHEDG certified version (DN 20 to DN 80 (¾ to 3 )). MC2 and MC2 hygienic are suitable
More informationCAPACITANCE LEVEL SWITCH
CAPACITANCE LEVEL SWITCH http: //www.fine-tek.com e-mail: info@fine-tek.com Tel: 886--696789 Fax: 886--68668 4 PRINCIPLE The capacitance level switch measuring principle is based on the "capacitance effects".
More informationPROCAP Capacitance Level Sensors
PROCAP Capacitance Simple. Rugged. Reliable. Triple thread screw on/off cover - No more bolts! Unsurpassed sensitivity and stability No interference from RF signals Switch selectable high/low fail-safe
More informationVIM20 Vortex Insertion Flowmeter
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBinMaster Price Book
BinMaster Price Book Vibrating Rod Prices Subject To Change Without Notice Not responsible for errors or omissions. F.O.B. Lincoln, Nebraska USA Shipping Address: 7201 N. 98th St., Lincoln, NE 68507 /
More informationSITRANS F flowmeters SITRANS F C MASSFLO MASS MC1. 4/146 Siemens FI Overview
Overview MSS 2100 MC1 DN 50 to DN 150 (2 to 6 ) is suitable for accurate mass flow measurement for all kind of liquids and gases. The sensor offers superior performance in terms of flow accuracy, turn-down
More informationPROCAP Capacitance Level Sensors
PROCAP Capacitance Level Sensors Simple. Rugged. Reliable. Triple thread screw on/off cover - No more bolts! Unsurpassed sensitivity and stability No interference from RF signals Switch selectable high/low
More informationFilled System Thermometers
illed System Thermometers Model N & NR Mechanical Thermometers ata sheet : ST/2012 The Rototherm range of filled system thermometers offer tough yet accurate instruments with rigid stems for direct mounting
More informationSITRANS F M. Flow sensor MAG 1100 F 3/59
Overview Integration The complete flowmeter consists of a sensor and an associated transmitter MAG 5000, 6000 and 6000 I. The flexible communication concept USM II simplifies integration and update to
More informationContinuous level measuring system NB 4000 Selection list
Table of contents Page Overview P2 Specification / application P3 P4 Options / Accessories P6 Dimensions / materials P7 Spare parts P9 Electrical installation P11 Subject to change. All dimensions in mm
More informationSpring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.
Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.
More informationContinuous level measuring system NB 3000 Selection list. Overview
Table of contents Page Overview P2 ------------------------------------------------------------------------------------------------------------------- Specifications P3 -------------------------------------------------------------------------------------------------------------------
More informationTable of contents Series VN 00 / 000 / 000 / 000 Page Safety notes / Technical support G --------------------------------------------------------------------------------------------------------- Introduction
More informationNIVOSWITCH R-400/R-500
NIVOSWITCH R400/R500 VIBRATION FORK LEVEL SWITCHES Dual purpose level switch with intelligent electronics applicable for: almost all liquids light, free flowing solids cellent noise immunity through high
More informationRIM20 Rotor Insertion Flowmeter
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationFlow Measurement. SITRANS F US Clamp-on. SITRANS FUP1010 (Portable) 4/318 Siemens FI Overview
Flow Measurement Siemens G 2011 Overview SITRNS FUP1010 clamp-on non-intrusive ultrasonic flow transmitter offers maximum versatility plus battery power for portable field use. It can operate in either
More informationCAPACITIVE LEVEL SWITCHES. Capacitive switch catalogue HYC-CSC01 Elect. Iss. 01
CAPACITIVE LEVEL SWITCHES Capacitive switch catalogue HYC-CSC01 Elect. Iss. 01 HYCONTROL CAPACITIVE LEVEL SWITCH RANGE Hycontrol ME capacitive level switches provide simple, accurate and reliable level
More informationVIM20 Vortex Insertion Flowmeter
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationNIVOCONT R VIBRATING ROD LEVEL SWITCHES
For solids NIVOCONT R VIBRATING ROD LEVEL SWITCHES O U R P R O F E S S I O N I S Y O U R L E V E L LEVEL SWITCHES O U R P R O F E S S NIVOCONT R VIBRATING ROD LEVEL SWITCHES MAIN FEATURES Extension up
More informationIOM. LP-100 & LP-200 Pulse Point TM Installation & Operation Manual
IOM LP-100 & LP-200 Pulse Point TM Installation & Operation Manual CAUTION It is essential that all instructions in this manual be followed precisely to ensure proper operation of the equipment. SAFETY
More informationGT All SS Industrial Dial Thermometer Gas Filled system
TM ll SS Industrial Dial Thermometer Gas Filled system Special Features approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil
More informationRS85 Vibrating fork level switch
Data sheet DS/-EN Rev. P Multi-option liquid level switch K-TEK Level products Measurement made easy Features Direct replacement for ultrasonic Gap switches, RF capacitance switches, float switches and
More informationJunction Boxes & Enclosures JBES Series: Pre-drilled 316L Stainless Steel Junction Boxes Increased Safety
Je10 Without Terminals ompliance ata: TEX - IE: TEX IE E Ex e II; Ex ia II; Ex ib II T6 to T5 Ex t 21 T80 to T95 Operating Temperatures: -50 to +70 199 TX Product atalog pplications: Terminal junction
More informationFlow Measurement SITRANS F C. Flow sensor MASS 2100 DI 3 to DI 40. 4/180 Siemens FI
Siemens AG Flow sensor MASS DI 3 to DI 0 Overview MASS DI 3 to DI 0 is suitable for accurate mass flow measurement of a variety of liquids and gases. The sensor offers superior performance in terms of
More informationFlow Measurement SITRANS F M. Flow sensor MAG 1100 F 4/57
Overview Integration The complete flowmeter consists of a sensor and an associated transmitter MAG 5000, 6000 and 6000 I. The flexible communication concept USM II simplifies integration and update to
More informationLevel Devices. Rotary Level Indicators Roto-Bin-Dicator
7901 NW 107th Terrace Level Devices We offer Rotary Level Indicators, Radio Frequency Level Indicators, and Turning Fork Level Sensors. For more information please contact your Schenck Process Aftermarket
More information98025 NAMUR/INLINE 3/2 way poppet valves electromagnetic actuated, indirectly controlled G 1/2, 1/2 NPT or flanged with NAMUR Interface
9805 NMUR/INLINE / way poppet valves electromagnetic actuated, indirectly controlled G /, / NPT or flanged with NMUR Interface Main application: single operated actuators TÜV-approval based on type examination
More informationDUST ALERT BinMaster Price Book binmaster.com Subject to change without notice 1
DUST ALERT - 3000 BinMaster Price Book 01-2019 binmaster.com Subject to change without notice 1 DUST ALERT - 3000 Dust Alert - 3000 The Dust Alert with integrated electronics and sensing probe utilizes
More information,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
More informationYour Global Source for Today s Most Popular Solenoid Valves
lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves, a division of International
More informationA Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
A Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation
More informationOperating Instructions. VEGASWING 61, 63 with oscillator SW E60N (EX)
Operating Instructions VEGASWING 61, 63 with oscillator SW E60N (EX) Contents Contents Safety information... 2 Note Ex area... 2 1 Product description... 3 2 Function and application... 4 2.1 Principle
More informationFlow Measurement SITRANS F C
Overview The complete flowmeter system SITRANS FC40 can be ordered for standard, hygienic or NAMUR service. All versions can be ordered for CT service, according to OIML R 117 (Liquids other than water)
More informationAC motors. 3/2 Overview
/ Overview / synchronous (induction) motors / forced-ventilated, degree of protection IP / PL motors forced-ventilated, degree of protection IP /4 Selection guides /4 dditional data for PH7 and PL motors
More informationA Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
A Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation
More informationRotary Paddle Bin Monitor MODEL KA & KAX
Setting The Standard For Supplier Excellence Rotary Paddle Bin Monitor MODEL KA & KAX Hassle-Free Housing Design - No Bolts! Industry Leading Motor Shut-off Feature Economical, Versatile Point Level Bin
More informationArmstrong In-Line and Insertion Vortex Flow Meters
Armstrong In-Line and Insertion Vortex Flow Meters Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit for up-to-date information. 1 In-Line
More informationFlow Measurement SITRANS F M. Flow sensor MAG 5100 W. 4/68 Siemens FI Overview
Flow Measurement Siemens G 2010 Overview pplication The main applications of the electromagnetic flow sensors can be found in the following fields: Water abstraction Water treatment Water distribution
More informationLevel limit switch Series RN 3000 / 6000 Selection list
Table of contents Overview 2 Specifications 4 Applications 6 Page -------------------------------------------------------------------------------------------------------- RN..001 8 Short extension length
More informationLevel Limit Switch liquiphant FTL 360 / FTL 361
Technical Information TI 184F/00/en evel imit Switch liquiphant FT 360 / FT 361 evel limit switch iquiphant II with vibrating probe. For all types of liquid. iquiphant level limit switch: FT 360, compact
More informationProbes.STD: Standard Probe (1, 3, 4, 5, 6).HIT: High Temp Probe (1, 3).SED: Sediment Probe (1, 3).SAN: Sanitary Probe (2)
Mark X if none Power Pac Sample VR41.X R. G036.STD Extension Probe Probes.STD: Standard Probe (1, 3, 4, 5, 6).HIT: High Temp Probe (1, 3).SED: Sediment Probe (1, 3).SAN: Sanitary Probe (2) Extensions (Use
More information