Solids Flowmeters LVDT flowmeters

Transcription

1 Siemens 2017 STRNS W200 series Overview pplication Operating with a microprocessor based integrator package, the W200 series flowmeters display flow rate, totalized flow, and rate alarms. Outputs are 0/4 to 20 m proportional to rate and contact closure for remote totalization. ry bulk solids enter the flowmeter before continuing through the process unhindered. The load cells convert the horizontal force of the deflection into an electrical signal. The integrator processes this into flowrate and integrated total weight. The sensing process is immune to the effect of product build-up as only the horizontal force is measured. With load cells located externally to the process, the W200 series flowmeters measure high capacities with a maximum rate of 900 t/h (990 STP). or high capacity aerated gravity conveyor pre-feed, the W250 has a maximum rate of 900 t/h (990 STP). ey applications ggregates rain ement Mineral processing STRNS W200 and W250 flowmeters are medium to high capacity flowmeters for various product sizes, densities, and fluidities. enefits or specialized pre-feed applications Sensing element mounted outside process lowrates from 200 to 900 t/h (220 to 990 STP) ontinuously monitoring of the material flow without interrupting the process ust-tight construction: suitable for use in hazardous areas and in washdown applications that require frequent cleaning Minimal maintenance or recalibration after the initial installation and material tests Siemens WT 10 Updated 0/2017 /11

2 Siemens 2017 STRNS W200 series Selection and ordering data 1) rticle No. Order ode STRNS W200 series flowmeters 7M7115- STRNS W200 and W250 flowmeters are medium to high capacity flowmeters for various product sizes, densities, and fluidities. W250 features aerated style designed for air slide gravity conveyors. lick on the rticle No. for the online configuration in the P ife ycle Portal. Model STRNS W t/h maximum design capacity t/h maximum design capacity 2 STRNS W250, aerated style 500 t/h maximum design capacity t/h maximum design capacity 4 onstruction Painted mild steel 304 stainless steel for model option stainless steel for model option stainless steel for model option stainless steel for model option 4 31 stainless steel for model option 1 31 stainless steel for model option 2 31 stainless steel for model option 3 31 stainless steel for model option 4 Sensing plate liner None (standard 304 stainless steel, 31 for construction options... ) Polyurethane or model options 1 and 3 or model options 2 and 4 lumina ceramic tiles or model options 1 and 3 or model options 2 and 4 oad cell 50 lb lb 2 Not specified (for quotation purposes only, not a 0 valid ordering option) pprovals, RM,, 1, RM, S/M lass, iv. 1, roups,, 2 and lass TX 2, x t 21 P5 T70,, RM, x, x t 21 P5 T70, x urther designs Please add "-Z" to article no. and specify order code(s). Stainless steel tag [9 x 38 mm (2.7 x 1.5 inch)], Y15 Measuring-point number/identification (max 27 characters), specify in plain text. pplication ng. reference number Y31 (max.15 characters), specify in plain text. Manufacturer's test certificate: 11 ccording to N nspection certificate type 3.1 per N ) 12 nstruction manuals. ll literature is available to download for free, in a range of languages, at alibration hanger weights rticle No. 20 g (0.04 lb) 7M g (0.1 lb) 7M g (0.2 lb) 7M g (0.4 lb) 7M g (1.1 lb) 7M g (2.2 lb) 7M g (4.4 lb) 7M g (11 lb) 7M Note: calibration accessories should be ordered as a separate item on the order. Spare parts oad cell, 50 lb, stainless steel 7M oad cell, 100 lb, stainless steel 7M oad cell, 50 lb, stainless steel, 7M7725-1T S/M/TX/ X oad cell, 100 lb, stainless steel, 7M7725-1U S/M/TX/ X W calibration pulley with hardware and cable spare 7M7723-1T W200 series bearing with plate mount shaft, 7M7723-1U standard, spare W200 series bearing with plate mount shaft, 7M7723-1V stainless steel, spare W200 series sensing plate support cables, spare 7M7723-1W W250 series sensing plate support cables, spare 7M7723-1X W200 sensing plate 500 TP 304, standard 7M7723-1Y W200 sensing plate 900 TP 304, standard 7M7723-1M W250 sensing plate 500 TP 304, standard 7M7723-1M W250 sensing plate 900 TP 304, standard 7M7723-1M 1) Not available with construction option. /12 Siemens WT 10 Updated 0/2017

3 Siemens 2017 STRNS W200 series Selection and ordering data W200 sensing plate 500 TP 304, W200 sensing plate 900 TP 304, W250 sensing plate 500 TP 304, W250 sensing plate 900 TP 304, W200 sensing plate 500 TP 304, ceramic lined W200 sensing plate 900 TP 304, ceramic lined W250 sensing plate 500 TP 304, ceramic lined W250 sensing plate 900 TP 304, ceramic lined W200 sensing plate 500 TP 31, standard W200 sensing plate 900 TP 31, standard W250 sensing plate 500 TP 31, standard W250 sensing plate 900 TP 31, standard W200 sensing plate 500 TP 31, W200 sensing plate 900 TP 31, W250 sensing plate 500 TP 31, W250 sensing plate 900 TP 31, W200 sensing plate 500 TP 31, ceramic lined W200 sensing plate 900 TP 31, ceramic lined W250 sensing plate 500 TP 31, ceramic lined W250 sensing plate 900 TP 31, ceramic lined rticle No. 7M7723-1M 7M7723-1M 7M7723-1M 7M7723-1M 7M7723-1M 7M7723-1M 7M7723-1M 7M7723-1M 7M7723-1MM 7M7723-1MN 7M7723-1MP 7M7723-1MQ 7M7723-1MR 7M7723-1MS 7M7723-1MT 7M7723-1MU 7M7723-1MV 7M7723-1MW 7M7723-1MX 7M7723-1MY Siemens WT 10 Updated 0/2017 /13

4 Siemens 2017 STRNS W200 series imensional drawings 2.0 (50.8) 1.0 (25.4) Ø 0.47 (11.9) 1.25 (31.8) 2.25 (27.15) 500 t/h 900 t/h 25.0 (35.0) 30.0 (72.0) 21.0 (533.4) 2.0 (0.4) 12.0 (304.8) 1.50 (419.1) 5.75 (14.1), 7.0 (177.8), 23.0 (584.2) 0º 12.0 (304.8) 12.0 (304.8) 44.8 ( ) 1.5 (419.1) 1.5 (419.1) (304.1) 14.8 (377.4) 59.0 (1498.) 4.0 (1 25.) 1.00 (25.4) 2.18 (55.37) Ø 0.5 (14.2) 41.5 (1054.1) (952.5) (841.8) 7.13 (181.0) 2.18 (55.37) (739.8) (892.2) 40.8 ( ) 4.8 ( ).75 (171.5), 5.3 (18.3), (791.0) (943.4) 35.5 (901.7) 41.5 ( ) W200, dimensions in inch (mm) /14 Siemens WT 10 Updated 0/2017

5 Siemens 2017 STRNS W200 series 45º 4.0 (101.) 2.14 (54.3) 1.0 (25.4) Ø0.5 (14.2) 14.5 (38.3) ( ) R 1.0 (25.4) Q P 42.5 ( ) 23.0 (584.2) 2.19 (55.3) Ø0.5 (14.22) N M 2.19 (55.3) 500 t/h 900 t/h 500 t/h (74.0) ( ) (37.5) 37.0 (939.8) 4.5 (115.9),.5 (1.2), Ø0.75 (19.1), t/h Ø, 8 Ø4.07 (103.4) Ø.07 (154.1) Ø9.0 (228.) Ø11.0 (279.4).31 (1 0.3) 35.3 (904.9) 40.0 (1 01.0) 0.74 (18.8) 0.94 (23.8) 3.13 (79.5) 3.19 (81.03) (58.3) 2.38 (9.9) M N 40.0 (1 01.0) 52.0 ( ) 35.3 (904.9) 47.3 ( ).31 (10.3), 7.13 (181.0), (409.8) 20.0 (508.0) P (1 147.) ( ) 5.13 (130.2),.13 (155.), Q R 33.0 (838.2) 45.0 ( ) ( ) 91.0 ( ) W250, dimensions in inch (mm) Siemens WT 10 Updated 0/2017 /15

6 Red + X Red lack reen + S Shield Shield Siemens 2017 STRNS W200 series Schematics Note: conduit and cable arrangement may differ from example shown. onduit and connector not provided on hazardous option oad cell oad cell lack White White reen Shield unction box - X - S - S + S To integrator W200 and W250 connections /1 Siemens WT 10 Updated 0/2017