SITRANS F X SITRANS FX300 3/355

Size: px

Start display at page:

Download "SITRANS F X SITRANS FX300 3/355"

Rolf Hardy
6 years ago
Views:

Siemens AG 204 Flow Measurement Overview vortex flowmeters provide accurate volumetric and mass flow measurement of steam, gases and liquids as an all-in-one solution with integrated temperature and

SITRANS FX00 The main applications of SITRANS FX00 can be found in the following sectors: Chemical Petrochemical Oil & Gas Power plants -Air - Heating - Cooling - Chilling Food & beverage -

have 2-wire technology and HART communication Temperature compensation for saturated steam as standard feature Integrated temperature and pressure measurement enabling direct compensation of density

1 Siemens AG 204 Flow Measurement Overview vortex flowmeters provide accurate volumetric and mass flow measurement of steam, gases and liquids as an all-in-one solution with integrated temperature and pressure compensation. SITRANS FX00 The main applications of SITRANS FX00 can be found in the following sectors: Chemical Petrochemical Oil & Gas Power plants -Air - Heating - Cooling - Chilling Food & beverage - Pharmaceutical - Sugar refineries - Dairies -Breweries - Production of soft drinks Refining Water & waste water System Overview Version Flange Sandwich Dual transmitter Compact Benefits All devices have 2-wire technology and HART communication Temperature compensation for saturated steam as standard feature Integrated temperature and pressure measurement enabling direct compensation of density Pressure, temperature and flow can be read at a single point. No additional installation of pressure and temperature sensors Direct measurement of energy or energy consumption Optimum process reliability thanks to Intelligent Signal Processing (ISP) - stable readings, free of external perturbations Fully welded stainless steel construction with high corrosion, pressure and temperature resistance Maintenance-free sensor design Ready to use due to plug & play feature. No additional cabling work Minimal pressure drop Compact or remote design Pressure and temperature compensation for fluctuating volume flows Measurement of consumption in compressed air systems No risk of deposits or damage (sensor in the turbulent area) All units parameterized prior to delivery Application The SITRANS FX00 is a flowmeter in a single or dual transmitter version, suitable for measuring industrial steam, gases, as well as conductive and non-conductive liquids, e.g. steam (saturated steam, superheated steam), industrial gases (compressed air, nitrogen, liquefied gases, flue gases), and conductive and non-conductive liquids (demineralized water, boiler feed water, solvents, heat transfer oil). Remote Design The unit is available in a compact or a remote version with up to 5 meter distance from flowmeter to transmitter. When ordering a remote version the transducer cables are pre-mounted and ready for installation. Function Operating Principle vortex flowmeters measure flow rate by detecting the frequency at which alternating vortices are shed from a bluff body inserted into the flow stream. This principle of measurement is known as Von Karman s vortex street principle: alternating vortices form behind an object in a stream. The frequency of the alternating vortices is proportional to the flow rate. The passage of a vortex causes a slight stress on a pick-up placed downstream of the bluff body. The stress is picked up and counted as pressure surges by a dual Piezo crystal placed inside the wing. Siemens FI US Edition /55

2 Flow Measurement Siemens AG 204 SITRANS FX00 Q d $ = Bluff Body, % = Pick-up The flowmeter calculates the flow velocity using the following equation: Q = A V = A d / St f = 0.9 f / K [m /h] Where: Q = flow rate [m /h] f = vortex shedding frequency [Hz] K = calibration constant [pulses/m ] d = width of the bluff body [m] St = Strouhal Number A = cross-section area [m 2 ] V = flow velocity [m/s] Requirements In order to generate the vortex streets, the medium must have a minimum velocity: For steam and gases, the flow velocity must be 2 to 80 m/s (6.6 to 262 ft/s) For liquids the flow velocity must be 0.4 to 0 m/s (. to 2.8 ft/s) Design SITRANS FX00 volumetric and mass flowmeter is available in the following configurations: SITRANS FX00 Single transmitter The single transmitter is available as a flange or sandwich solution in the following versions: Vortex standard flowmeter Measurement with integrated temperature sensor as standard feature Vortex flowmeter with pressure sensor Measurement with integrated temperature and pressure sensors for compensation of gases, wet gases, gas mixtures or steam (for engergy measurement). Vortex flowmeter with pressure sensor and isolation valve Allowing the pressure sensor to be shut off for the purpose of pressure or leak testing of the pipeline or for being exchanged without interrupting the process. Using the built-in two-way valve, the pressure sensor can also be calibrated and tested at a later time. Vortex flowmeter - remote version Sensors and tranmitters mounted separately. The device is equipped with temperature sensor (standard), pressure sensor (optional) and isolation valve (optional) providing all the features of the compact mounted version. SITRANS FX00 Dual transmitter This is a genuine redundant system with two independent sensors and two transmitters providing twofold functional reliability and availability of the measurement. This variant is optimally suited for measurements in multi-product pipelines. The dual converter is available as: Vortex standard flowmeter Measurement with temperature sensor for saturated steam compensation as standard feature 2 Technical specifications Input Measuring range limits See Dimensional Drawings Media pressure bar ( psi) (Higher pressures on request) Output Current output Measuring range 4 20 ma Over range 20.8 ma % (05% %) Load -min. 00 -max. R max = (U Power Supply - 4 V)/22 ma Error signal NAMUR NE 4 Maximum output 22 ma (2.5 %) Multidrop mode 4 ma Digital output Communication HART Physical layer FSK Device category Transmitter Pulse output (Passive pulse output, needs separate power supply. Pulse output has to be defined in the Option menu Y47 totalizer or energy unit has to be entered. E.g.: pulse/kg or pulse/0 m³) Pulse frequency Max. 0.5 Hz Power supply Min. 24 V DC as NAMUR or Non-Ex version open < ma, max. 6 V, closed 00 ma, U < 2 V Ex version open < ma, max. 0 V, closed 00 ma, U < 2 V Accuracy Standard version For liquids -Re % For steam and gases -Re % For steam, gases and liquids < Re < % Pressure and temperaturecompensated version For liquids < Re < % -Re % For gases and steam < Re < % -Re % Repeatability 0. % Installation conditions (At different conditions, e.g. installation after control valve, bends or reductions, please refer to the operating instructions.) Inlet run 20 x DN Outlet run 5 x DN /56 Siemens FI US Edition

3 Siemens AG 204 Flow Measurement Software Uncompensated for gases, steam and liquids, but temperature-compensated for saturated steam Density-compensated by temperature and pressure for superheated steam, no energy calculation Gross heat When the thermal energy of steam is to be measured In options Y5 to Y56 add information regarding: Order option Order option 4 Order option 5 Y5 Variable current output Y52 Power unit Select one of the following units from power units table in Y52: kj/h, MJ/h, GJ/h, Btu/h, kcal/h, kw, MW or special (custom) Y5 Fullscale power value Y54 Variable pulse output Y55 Totalizer on/off Y56 Configures for totalizer select one of the following units from energy units table in Y56: kj, MJ, GJ, Btu th, kcal, kwh, MWh or special (custom). Density compensated by temperature and pressure for gases, wet Order option 7 gases Wet gases Select Y49 and enter relative humidity in % FAD - Free Air Delivery When the delivered air of a compressor is to be Order option 8 measured In Y8 to Y87 add information regarding: Mixed gases Y8 Inlet suction temperature Y82 Atmosphere pressure Y8 Pressure drop at inlet filter Y84 Inlet relative humidity Y85 Actual revolutions per minute (of compressor) Y86 Rated rpm of compressor Y87 Outlet relative humidity. This information is available from compressor supplier. When the fluid is a gas mixture, contact your local Siemens representative and provide gas names and amount in %. Rated operation conditions Ambient temperature Non-Ex version C( F) Ex version C( F) Storage temperature C( F) Media temperature C ( F) Density Taken into consideration when rating Viscosity <0 cp Reynolds number Media pressure limit Max. 00 bar (450 psi) Higher pressure on request (contact your local Siemens representative) SITRANS FX00 Design Material Sensor: house/pick-up AISI 6L (.4404)/ AISI 6L (.445) Hastelloy C22/ available on request (contact your local Siemens representative) Housing: transmitter Aluminum for increased requirements Sensor gaskets (Pick-up/Pressure sensor) AISI 6L (.445) / FPM or FFKM FPM (Viton) for steam and non-aggressive gases. FFKM (Kalrez) for chlorine and other aggressive gases. (FPM/FFKM gaskets are only supplied if FX00 is configured with pressure sensor) Process connections Flange norm EN 092- form B/B2 or ASME B6.5 RF. Other flanges on request (contact your local Siemens representative) Flange version DN5 00 (½ 2") Sandwich version DN5 00 (½ 4") Degree of protection IP66/IP67 Dimensions and weights See Dimensional Drawings Display and operating interface Local display 2 lines, 0 characters per line Languages German, English, French Power supply Standard version 4 6 V DC Ex version 4 0 V DC Certificates and approvals Explosion protection ATEX II 2G EEx d ia [ia] IIC T6 FM US/C Class I, II, III, Div. and 2 Calibration All flowmeters will be delivered with a point calibration certificate Material Certificate Certificate of compliance, pressure test, material certificate, material in acc. of NACE and PMI of pressure bearing metal parts. Cleaning Choose Cleaning Class when fluid is oxygen or contains chloride. Certificates X-ray test on pressurized weldings and dye penetration test on pressure bearing weldings Dye penetration test Siemens FI US Edition /57

4 Flow Measurement Siemens AG 204 SITRANS FX00 Selection and Ordering data Article No. Ord. code SITRANS FX00 Flanged 7ME2600- Single transmitter and T max = 240 C (464 F) Connection size Sensor size DN 5 (½") DN 5 A DN 25 (") DN 25 2B DN 40 (½") DN 40 2K DN 50 (2") DN 50 2R DN 80 (") DN 80 L DN 00 (4") DN 00 S DN 50 (6") DN 50 4M DN 200 (8") DN 200 4T DN 250 (0") DN 250 4W DN 00 (2") DN 00 5E Flange norm and nominal pressure Form B/B2 EN 092- PN 0 DN A PN 6 DN B PN 25 DN C PN 40 DN D PN 6 DN E PN 00 DN F RF ASME B lb ½... 2" J 00 lb ½... 2" K 600 lb ½... 6" L Sensor material/gasket St. steel AISI 6L (.4404)/AISI 6L (.445)/ FPM St. steel AISI 6L (.4404)/AISI 6L 5 (.445)/ FFKM Transmitter design Compact version - no cable Remote version: 5 m (6.4 ft) 2 0 m (2.8 ft) 5 m (49.2 ft) 4 Approval and cable gland Non-Ex, M20 x.5 Non-Ex, ½ NPT 2 FM approval Class Div. 2, M20 x.5 ATEX, M20 x.5 4 ATEX, ½ NPT 5 FM approval Class Div., M20 x.5 6 FM approval Class Div., /2" NPT 7 FM approval Class Div. 2, /2" NPT 8 Further approvals and cable glands IEC Ex with M20 x.5 9 N 0 A IEC Ex with ½" NPT 9 N 0 B Transmitter, display and communication With display, HART A Selection and Ordering data Article No. Ord. code SITRANS FX00 Flanged 7ME2600- Single transmitter and T max = 240 C (464 F) Pressure sensor and isolation valve Without pressure sensor A With pressure sensor, range: 4 bar (58 psi) B 6 bar (87 psi) D 0 bar (45 psi) E 6 bar (22 psi) G 25 bar (6 psi) H 40 bar (580 psi) K 60 bar (870 psi) L 00 bar (450 psi) N With isolation valve and pressure sensor, range: 4 bar (58 psi) P 6 bar (87 psi) Q 0 bar (45 psi) R 6 bar (22 psi) S 25 bar (6 psi) U 40 bar (580 psi) V 60 bar (870 psi) W 00 bar (450 psi) Y Software Uncompensated for gases, wet gases, steam and liquids, respectively, temperature compensation for saturated steam Density compensation for superheated 4 steam Density compensation for superheated 5 steam and setting of Gross heat Opt. Y5... Y56 for Energy measuring Density compensation for gases and wet 7 gases and setting of Relative humidity at opt. Y49 Density compensation for gases, wet gases 8 and setting of FAD - free air delivery Opt. Y49 and Y8... Y87 for Compressor settings /58 Siemens FI US Edition

5 Siemens AG 204 Flow Measurement Selection and Ordering data Additional information Please add -Z to Article No. and specify as minimum Order code Y40, Y4, Y42 and Y45 and plain text. Input process data Medium: Specify steam, gas, liquid or customised Temperature: Specify max. operating temperature and units Pressure: Specify max. operating pressure and units Density (only by customer-specified medium): Specify medium density and units Viscosity (only by customer-specified medium): Specify medium viscosity and units Flow rate: Specify min./max. flow rate and units Setting of pulse output: Specify totalizer or energy unit ( pulse/unit) Relative humidity (amount in % of process medium) Settings of gross heat Variable current output Power unit (specify: kj/h, MJ/h, GJ/h, Btu/h, kcal/h, kw, MW or special (custom)) Fullscale power value Variable pulse output Totalizer on/off Configure totalizer (specify: kj, MJ, GJ, Btu th, kcal, kwh, MWh or special (custom)) Settings of FAD Inlet suction temperature ) Atmosphere pressure ) Pressure drop filter 2) Inlet relative humidity ) Actual revolutions per minute (of compressor) 2) Rated Rpm of compressor 2) Outlet relative humidity 2) Order code Y40 Y4 Y42 Y4 Y44 Y45 Y47 Y49 Y5 Y52 Y5 Y54 Y55 Y56 Y8 Y82 Y8 Y84 Y85 Y86 Y87 ) Information to be provided by customer. 2) Information is available on the data sheet from the compressor supplier. Operating instructions Description English Article No. A5E20042 SITRANS FX00 This device is shipped with a Quick Start guide and a CD containing further SITRANS F literature. All literature is also available for free at: Selection and Ordering data Further designs Please add -Z to Article No. and specify Order code. Converter housing material Aluminum for increased requirement, color: petrol green Material certificate Certificate of compliance EN Pressure test +. accordance EN 0204 Material certificate pressure parts + certificate. Material in accordance with NACE MR PMI of pressure bearing metal parts + certificate. Material certificate pressure parts + PMI/certificate. Calibration certificate FX00 As standard the flow device has a -point calibration certificate. Calibration certificate (5 point) Hardness test Hardness test on pressure bearing parts +. Equotip LD procedure according to NACE MR Cleaning for oil and fat Class increased requirement (customer-specified) and. (EN 0204) Class 2 and. (EN 0204) Certificates X-ray test on pressure bearing weldings Dye penetration test on pressure bearing weldings Tag name plate Stainless steel tag with mm characters, max. 2 x 8 characters (40 x 20 mm, add plain text) Stainless steel tag with 2.5 mm characters, max. 8 x 40 characters (20 x 46 mm, add plain text) Order code A0 C0 C C2 C C4 C5 D H0 K46 K48 M56 M58 Y7 Y8 Siemens FI US Edition /59

6 Flow Measurement Siemens AG 204 SITRANS FX00 Selection and Ordering data Article No. Ord. code SITRANS FX00 Sandwich Single transmitter and 7ME2700- T max = 240 C (464 F) Connection size Sensor size DN 5 (½") DN 5 A DN 25 (") DN 25 2B DN 40 (½") DN 40 2K DN 50 (2") DN 50 2R DN 80 (") DN 80 L DN 00 (4") DN 00 S Nominal pressure EN PN 6 DN B PN 40 DN D PN 6 DN E PN 00 DN F ASME 50 lb ½... 4" J 00 lb ½... 4" K 600 lb ½... 4" L Sensor material/gasket St. steel AISI 6L (.4404)/AISI 6L (.445)/FPM St. steel AISI 6L (.4404)/AISI 6L 5 (.445)/FFKM Transmitter design Compact version - no cable Remote version: 5 m (6.4 ft) 2 0 m (2.8 ft) 5 m (49.2 ft) 4 Approval and cable gland Non-Ex, M20 x.5 Non-Ex, ½ NPT 2 FM approval Class Div. 2, M20 x.5 ATEX, M20 x.5 4 ATEX, ½ NPT 5 FM approval Class Div., M20 x.5 6 FM approval Class Div., /2" NPT 7 FM approval Class Div. 2, /2" NPT 8 Further approvals and cable glands IEC Ex with M20 x.5 9 N 0 A IEC Ex with ½" NPT 9 N 0 B Transmitter, display and communication With display, HART A Selection and Ordering data Article No. Ord. code SITRANS FX00 Sandwich Single transmitter and 7ME2700- T max = 240 C (464 F) Pressure sensor and isolation valve Without pressure sensor A With pressure sensor, range: 4 bar (58 psi) B 6 bar (87 psi) D 0 bar (45 psi) E 6 bar (22 psi) G 25 bar (6 psi) H 40 bar (580 psi) K 60 bar (870 psi) L 00 bar (450 psi) N With isolation valve and pressure sensor, range: 4 bar (58 psi) P 6 bar (87 psi) Q 0 bar (45 psi) R 6 bar (22 psi) S 25 bar (6 psi) U 40 bar (580 psi) V 60 bar (870 psi) W 00 bar (450 psi) Y Software Uncompensated for gases, wet gases, steam and liquids respectively temperature compensation for saturated steam Density compensation for superheated steam 4 Density compensation for superheated steam 5 and setting of Gross heat Opt. Y5... Y56 for Energy measuring Density compensation for gases and wet 7 gases and setting of Relative humidity at opt. Y49 Density compensation for gases, wet gases 8 and setting of FAD - free air delivery Opt. Y49 and Y8... Y87 for Compressor settings /60 Siemens FI US Edition

7 Siemens AG 204 Flow Measurement Selection and Ordering data Additional information Please add -Z to Article No. and specify as minimum Order code Y40, Y4, Y42 and Y45 and plain text. Input process data Medium: Specify steam, gas, liquid and customised Temperature: Specify max. operating temperature and units Pressure: Specify max. operating pressure and units Density (only by customer-specified medium): Specify medium density and units Viscosity (only by customer-specified medium): Specify medium viscosity and units Flow rate: Specify min./max. flow rate and units Setting of pulse output: Specify totalizer or energy unit ( pulse/unit) Relative humidity (amount in % of process medium) Settings of gross heat Variable current output Power unit (specify: kj/h, MJ/h, GJ/h, Btu/h, kcal/h, kw, MW or special (custom)) Fullscale power value Variable pulse output Totalizer on/off Configure totalizer (specify: kj, MJ, GJ, Btu th, kcal, kwh, MWh or special (custom)) Settings of FAD Inlet suction temperature ) Atmosphere pressure ) Pressure drop filter 2) Inlet relative humidity ) Actual revolutions per minute (of compressor) 2) Rated Rpm of compressor 2) Outlet relative humidity 2) Order code Y40 Y4 Y42 Y4 Y44 Y45 Y47 Y49 Y5 Y52 Y5 Y54 Y55 Y56 Y8 Y82 Y8 Y84 Y85 Y86 Y87 ) Information to be provided by customer. 2) Information is available on the data sheet from the compressor supplier. Operating instructions Description English Article No. A5E20042 SITRANS FX00 This device is shipped with a Quick Start guide and a CD containing further SITRANS F literature. All literature is also available for free at: Selection and Ordering data Further designs Please add -Z to Article No. and specify Order code. Converter housing material Aluminum for increased requirement, color: petrol green Material certificate Certificate of compliance EN Pressure test +. accordance EN 0204 Material certificate pressure parts + certificate. Material in accordance with NACE MR PMI of pressure bearing metal parts + certificate. Material certificate pressure parts + PMI/certificate. Calibration certificate FX00 As standard the flow device has a -point calibration certificate. Calibration certificate (5-point) Hardness test Hardness test on pressure bearing parts +. Equotip LD procedure according to NACE MR Cleaning for oil and fat Class increased requirement (customer-specified) and. (EN 0204) Class 2 and. (EN 0204) Certificates X-ray test on pressure bearing weldings Dye penetration test on pressure bearing weldings Tag name plate Stainless steel tag with mm characters, max. 2 x 8 characters (40 x 20 mm, add plain text) Stainless steel tag with 2.5 mm characters, max. 8 x 40 characters (20 x 46 mm, add plain text) Order code A0 C0 C C2 C C4 C5 D H0 K46 K48 M56 M58 Y7 Y8 Siemens FI US Edition /6

8 Flow Measurement Siemens AG 204 SITRANS FX00 Selection and Ordering data Article No. Ord. code SITRANS FX00 Flanged Dual transmitter and 7ME2800- T max = 240 C (464 F) Connection size Sensor size DN 40 (½") DN 40 2K DN 50 (2") DN 50 2R DN 80 (") DN 80 L DN 00 (4") DN 00 S DN 50 (6") DN 50 4M DN 200 (8") DN 200 4T DN 250 (0") DN 250 4W DN 00 (2") DN 00 5E Flange norm and nominal pressure Form B/B2 EN 092- PN 0 DN A PN 6 DN B PN 25 DN C PN 40 DN D PN 6 DN E PN 00 DN F RF ASME B lb ½... 2" J 00 lb ½... 2" K 600 lb ½... 6" L Sensor material/gasket Stainless steel AISI 6L (.4404)/ AISI 6L (.445)/FPM Stainless steel AISI 6L (.4404)/ 5 AISI 6L (.445)/FFKM Transmitter design Compact version - no cable Remote version: 5 m (6.4 ft) 2 0 m (2.8 ft) 5 m (49.2 ft) 4 Approval and cable gland Non-Ex, M20 x.5 Non-Ex, ½ NPT 2 FM approval Class Div. 2, M20 x.5 ATEX, M20 x.5 4 ATEX, ½ NPT 5 FM approval Class Div., M20 x.5 6 FM approval Class Div., /2" NPT 7 FM approval Class Div. 2, /2" NPT 8 Further approvals and cable glands IEC Ex with M20 x.5 9 N 0 A IEC Ex with ½" NPT 9 N 0 B Transmitter, display and communication With display, HART A Pressure sensor and isolation valve Without pressure sensor A Software Uncompensated for gases, wet gases, steam and liquids respectively temperature compensation for saturated steam Selection and Ordering data Additional information Please add -Z to Article No. and specify as minimum Order code Y40, Y4, Y42 and Y45 and plain text. Input process data Medium: Specify steam, gas, liquid and customised Temperature: Specify max. operating temperature and units Pressure: Specify max. operating pressure and units Density (only by customer-specified medium): Specify medium density and units Viscosity (only by customer-specified medium): Specify medium viscosity and units Flow rate: Specify min./max. flow rate and units Setting of pulse output; Specify totalizer or energy unit ( pulse/unit) Relative humidity (amount in % of process medium) Operating instructions for SITRANS FX00 Description Article No. English A5E20042 Order code Y40 Y4 Y42 Y4 Y44 Y45 Y47 Y49 This device is shipped with a Quick Start guide and a CD containing further SITRANS F literature. All literature is also available for free at: Selection and Ordering data Further designs Please add -Z to Article No. and specify Order code. Converter housing material Aluminum for increased requirement, color: petrol green Material certificate Certificate of compliance EN Pressure test +. accordance EN 0204 Material certificate pressure parts + certificate. Material in accordance with NACE MR PMI of pressure bearing metal parts + certificate. Material certificate pressure parts + PMI/certificate. Calibration certificate FX00 As standard the flow device has a -point calibration certificate. Calibration certificate (5-point) Hardness test Hardness test on pressure bearing parts +. Equotip LD procedure according to NACE MR Cleaning for oil and fat Class increased requirement (customer-specified) and. (EN 0204) Class 2 and. (EN 0204) Certificates X-ray test on pressure bearing weldings Dye penetration test on pressure bearing weldings Tag name plate Stainless steel tag with mm characters, max. 2 x 8 characters (40 x 20 mm, add plain text) Stainless steel tag with 2.5 mm characters, max. 8 x 40 characters (20 x 46 mm, add plain text) Order code A0 C0 C C2 C C4 C5 D H0 K46 K48 M56 M58 Y7 Y8 /62 Siemens FI US Edition

Siemens AG 204 Flow Measurement SITRANS FX00 SITRANS FX00 spare parts Description Article No. Seal disc 2.8-2-0. A5E02849 Socket only for DN 5/25 ; /2" Socket only for DN 5/25 ; " Pickup AISI 6L/.

Note: Dedicated service training is required. Please contact Customer Support. Article No. A5E027589 O-ring for pressure screw A5E028488 7. x 2.

5 Converter housing gasket A5E028495 59,5,5-2-N O-ring DIN77-20 x -FPM for A5E02855 sensor O-ring 0x2-NBR for leadthrough A5E028525 DUBOX plug, 5-pole-RM2 A5E028527 Electronic Basic D-HART A5E0285

9 Siemens AG 204 Flow Measurement SITRANS FX00 SITRANS FX00 spare parts Description Article No. Seal disc A5E02849 Socket only for DN 5/25 ; /2" Socket only for DN 5/25 ; " Pickup AISI 6L/.4404 On request On request On request O-ring pickup A5E Description Service Toolbox for programming the software (basic, steam and gas) as well as for changing settings and parameters. Note: Dedicated service training is required. Please contact Customer Support. Article No. A5E O-ring for pressure screw A5E x 2.62-FPM-70 Pressure sensor On request 4/6/0/6/25/40/60/00 bar Cover gasket O-Ring A5E x.5 Converter housing gasket A5E ,5,5-2-N O-ring DIN77-20 x -FPM for A5E02855 sensor O-ring 0x2-NBR for leadthrough A5E DUBOX plug, 5-pole-RM2 A5E Electronic Basic D-HART A5E0285 Schematics 2 2 Power supply Load - + ma Ampere meter, optional HART A A+ B B+ Steam D-HART Gas D-HART A5E02854 A5E Load for HART communication HART Display Cable feedthrough 0-pole (non-ex). O-ring for cable feedthrough 2.89 x pole plug Sensor replacement (incl. Seal disc, pickup, O-rings for pickup, and pressure screw DN 5 (incl. ½" socket) A5E A5E A5E Power supply Load Connection pulse output ma Ampere meter, optional 4 Counter A A+ B B+ DN 25 (incl. " socket) A5E0286 DN A5E02852 DN A5E Pressure sensor replacement (Incl. pressure sensor, DUBOX plug, 2 O-rings and calibration certificate) 4 bar (58 psi) A5E bar (87 psi) A5E bar (45 psi) A5E bar (22 psi) A5E bar (6 psi) A5E bar (580 psi) A5E bar (870 psi) A5E bar (450 psi) A5E02847 Siemens FI US Edition /6

10 Flow Measurement Siemens AG 204 SITRANS FX00 Dimensional drawings Compact version a c b a c b D H H l L d Flange version Flange version with pressure sensor a D H D L d L H Flange version, dual converter /64 Siemens FI US Edition

11 Siemens AG 204 Flow Measurement SITRANS FX00 Flange version EN092- Size Pressure rating Dimensions [mm (inch)] Weight [kg (lb)] ) DN PN a b c d D L H l Flowmeter (without pressure sensor) Flowmeter (with pressure sensor) 5 40 (5.24) 05 (4.) 79 (7.05) 7. (0.68) 95 (.74) 200 (7.87) 265 (0.4) 44 (5.67) 5.5 (2.) 6. (.45) 5 00 (5.24) 05 (4.) 79 (7.05) 7. (0.68) 05 (4.) 200 (7.87) 265 (0.4) 44 (5.67) 6.5 (4.) 7. (5.65) (5.24) 05 (4.) 79 (7.05) 28.5 (.2) 5 (4.5) 200 (7.87) 265 (0.4) 44 (5.67) 7. (6.09) 7.9 (7.42) (5.24) 05 (4.) 79 (7.05) 28.5 (.2) 40 (5.5) 200 (7.87) 265 (0.4) 44 (5.67) 9. (20.50) 9.9 (2.8) (5.24) 05 (4.) 79 (7.05) 4. (.70) 50 (5.9) 200 (7.87) 270 (0.6) 44 (5.67) 0.2 (22.49) 0.8 (2.8) (5.24) 05 (4.) 79 (7.05) 42.5 (.67) 70 (6.69) 200 (7.87) 270 (0.6) 44 (5.67) 4.2 (.) 4.8 (2.6) 50 6 (5.24) 05 (4.) 79 (7.05) 54.5 (2.5) 65 (6.50) 200 (7.87) 275 (0.8) 44 (5.67) 2. (26.68) 2.7 (28.00) (5.24) 05 (4.) 79 (7.05) 54.5 (2.5) 65 (6.50) 200 (7.87) 275 (0.8) 44 (5.67) 2. (27.2) 2.9 (28.44) 50 6 (5.24) 05 (4.) 79 (7.05) 54.5 (2.5) 80 (7.09) 200 (7.87) 275 (0.8) 44 (5.67) 6. (5.94) 6.9 (7.26) (5.24) 05 (4.) 79 (7.05) 5.9 (2.2) 95 (7.68) 200 (7.87) 275 (0.8) 44 (5.67) 7.8 (9.24) 8.4 (40.57) 80 6 (5.24) 05 (4.) 79 (7.05) 82.5 (.25) 200 (7.87) 200 (7.87) 290 (.42) 54 (6.06) 6.8 (7.04) 7.4 (8.6) (5.24) 05 (4.) 79 (7.05) 82.5 (.25) 200 (7.87) 200 (7.87) 290 (.42) 54 (6.06) 8.8 (4.45) 9.4 (42.77) 80 6 (5.24) 05 (4.) 79 (7.05) 8.7 (.22) 25 (8.46) 200 (7.87) 290 (.42) 54 (6.06) 22.8 (50.27) 2.4 (5.59) (5.24) 05 (4.) 79 (7.05) 80.9 (.9) 20 (9.06) 200 (7.87) 290 (.42) 54 (6.06) 26.8 (59.08) 27.4 (60.4) 00 6 (5.24) 05 (4.) 79 (7.05) 07. (4.22) 220 (8.66) 250 (9.84) 0 (2.20) 64 (6.46) 2.4 (47.8) 22 (48.50) (5.24) 05 (4.) 79 (7.05) 07. (4.22) 25 (9.25) 250 (9.84) 0 (2.20) 64 (6.46) 24.4 (5.79) 25 (55.2) 00 6 (5.24) 05 (4.) 79 (7.05) 06. (4.9) 250 (9.84) 250 (9.84) 0 (2.20) 64 (6.46) 29.4 (64.82) 0 (66.4) (5.24) 05 (4.) 79 (7.05) 04. (4.) 265 (0.4) 250 (9.84) 0 (2.20) 64 (6.46) 5.4 (78.04) 6 (79.7) 50 6 (5.24) 05 (4.) 79 (7.05) 59. (6.27) 285 (.22) 00 (.8) 25 (2.80) 74 (6.85) 5.2 (77.60) 5.8 (78.9) (5.24) 05 (4.) 79 (7.05) 59. (6.27) 00 (.8) 00 (.8) 25 (2.80) 74 (6.85) 4.2 (90.8) 4.8 (92.5) 50 6 (5.24) 05 (4.) 79 (7.05) 57. (6.9) 45 (.58) 00 (.8) 25 (2.80) 74 (6.85) 59.2 (0.5) 59.8 (.84) (5.24) 05 (4.) 79 (7.05) 54. (6.07) 55 (.98) 00 (.8) 25 (2.80) 74 (6.85) 67.2 (48.5) 67.8 (49.47) (5.24) 05 (4.) 79 (7.05) (8.) 40 (.9) 00 (.8) 50 (.78) 94 (7.64) 7.8 (8.) 8.4 (84.66) (5.24) 05 (4.) 79 (7.05) (8.) 40 (.9) 00 (.8) 50 (.78) 94 (7.64) 7.8 (8.) 8.4 (84.66) (5.24) 05 (4.) 79 (7.05) (8.) 60 (4.7) 00 (.8) 50 (.78) 94 (7.64) 46.8 (0.8) 47.4 (04.50) (5.24) 05 (4.) 79 (7.05) (8.) 75 (4.76) 00 (.8) 50 (.78) 94 (7.64) 54.8 (20.8) 55.4 (22.4) (5.24) 05 (4.) 79 (7.05) (0.25) 95 (5.55) 80 (4.96) 70 (4.57) 224 (8.82) 57.4 (26.55) 58.0 (27.87) (5.24) 05 (4.) 79 (7.05) (0.25) 405 (5.94) 80 (4.96) 70 (4.57) 224 (8.82) 58.4 (28.75) 59.0 (0.07) (5.24) 05 (4.) 79 (7.05) (0.9) 425 (6.7) 80 (4.96) 70 (4.57) 224 (8.82) 74.4 (64.02) 75.0 (65.5) (5.24) 05 (4.) 79 (7.05) (0.9) 450 (7.72) 80 (4.96) 70 (4.57) 224 (8.82) 92.4 (20.7) 9.0 (205.0) 00 0 (5.24) 05 (4.) 79 (7.05) 09.7 (2.9) 445 (7.52) 450 (7.72) 95 (5.55) 244 (9.6) 75.7 (66.89) 76. (68.2) 00 6 (5.24) 05 (4.) 79 (7.05) 09.7 (2.9) 460 (8.) 450 (7.72) 95 (5.55) 244 (9.6) 82.2 (8.22) 82.8 (82.54) (5.24) 05 (4.) 79 (7.05) 07.9 (2.2) 485 (9.09) 450 (7.72) 95 (5.55) 244 (9.6) 98.7 (27.60) 99. (28.92) (5.24) 05 (4.) 79 (7.05) 07.9 (2.2) 55 (20.28) 450 (7.72) 95 (5.55) 244 (9.6) 27.5 (28.09) 28. (282.4) ) For dual converter: specified weight kg (6.7 lb). Siemens FI US Edition /65

12 Flow Measurement Siemens AG 204 SITRANS FX00 Flange version ASME B6.5 Size Pressure rating Dimensions [mm (inch)] Weight [kg (lb)] ) DN Class a b c d D L H l Flowmeter Flowmeter (without (with pressure pressure sensor) sensor) ½ 50 (5.24) 05 (4.) 79 (7.05) 5.8 (0.62) 90 (.54) 200 (7.87) 265 (0.4) 44 (5.67) 4.5 (9.92) 5. (.24) ½ 00 (5.24) 05 (4.) 79 (7.05) 5.8 (0.62) 95 (.74) 200 (7.87) 265 (0.4) 44 (5.67) 4.9 (0.80) 5.5 (2.) ½ 600 (5.24) 05 (4.) 79 (7.05).9 (0.55) 95 (.74) 200 (7.87) 265 (0.4) 44 (5.67) 5. (.24) 5.7 (2.57) 50 (5.24) 05 (4.) 79 (7.05) 26.6 (.05) 0 (4.) 200 (7.87) 265 (0.4) 44 (5.67) 6.2 (.67) 6.8 (4.99) 00 (5.24) 05 (4.) 79 (7.05) 26.6 (.05) 25 (4.92) 200 (7.87) 265 (0.4) 44 (5.67) 7.2 (5.87) 7.8 (7.20) 600 (5.24) 05 (4.) 79 (7.05) 24. (0.96) 25 (4.92) 200 (7.87) 265 (0.4) 44 (5.67) 7.5 (6.5) 8. (7.86) ½ 50 (5.24) 05 (4.) 79 (7.05) 40.9 (.6) 25 (4.92) 200 (7.87) 270 (0.6) 44 (5.67) 8. (8.0) 8.9 (9.62) ½ 00 (5.24) 05 (4.) 79 (7.05) 40.9 (.6) 55 (6.0) 200 (7.87) 270 (0.6) 44 (5.67) 0.4 (22.9) (24.25) ½ 600 (5.24) 05 (4.) 79 (7.05) 8. (.50) 55 (6.0) 200 (7.87) 270 (0.6) 44 (5.67).4 (25.) 2 (26.46) 2 50 (5.24) 05 (4.) 79 (7.05) 52.6 (2.07) 50 (5.9) 200 (7.87) 275 (0.8) 44 (5.67) (24.25).6 (25.57) 2 00 (5.24) 05 (4.) 79 (7.05) 52.6 (2.07) 65 (6.50) 200 (7.87) 275 (0.8) 44 (5.67) 2.4 (27.4) (28.66) (5.24) 05 (4.) 79 (7.05) 49. (.94) 65 (6.50) 200 (7.87) 275 (0.8) 44 (5.67).9 (0.64) 4.5 (.97) 50 (5.24) 05 (4.) 79 (7.05) 78 (.07) 90 (7.48) 200 (7.87) 290 (.42) 54 (6.06) 9.8 (4.65) 20.4 (44.97) 00 (5.24) 05 (4.) 79 (7.05) 78 (.07) 20 (8.27) 200 (7.87) 290 (.42) 54 (6.06) 22.8 (50.27) 2.4 (5.59) 600 (5.24) 05 (4.) 79 (7.05) 7.7 (2.90) 20 (8.27) 200 (7.87) 290 (.42) 54 (6.06) 2.8 (52.47) 24.4 (5.79) 4 50 (5.24) 05 (4.) 79 (7.05) 02.4 (4.0) 20 (9.06) 250 (9.84) 0 (2.20) 64 (6.46) 2.4 (5.59) 24 (52.9) 4 00 (5.24) 05 (4.) 79 (7.05) 02.4 (4.0) 255 (0.04) 250 (9.84) 0 (2.20) 64 (6.46).4 (69.2) 2 (70.55) (5.24) 05 (4.) 79 (7.05) 97.2 (.8) 275 (0.8) 250 (9.84) 0 (2.20) 64 (6.46) 40.4 (89.07) 4 (90.9) 6 50 (5.24) 05 (4.) 79 (7.05) 54.2 (6.07) 280 (.02) 00 (.8) 25 (2.80) 74 (6.85) 6.2 (79.8) 6.8 (8.) 6 00 (5.24) 05 (4.) 79 (7.05) 54.2 (6.07) 20 (2.60) 00 (.8) 25 (2.80) 74 (6.85) 5.2 (2.88) 5.8 (4.20) (5.24) 05 (4.) 79 (7.05) 46. (5.76) 55 (.98) 00 (.8) 25 (2.80) 74 (6.85) 46.2 (0.85) 76.8 (69.) 8 50 (5.24) 05 (4.) 79 (7.05) (7.98) 45 (.58) 00 (.8) 50 (.78) 94 (7.64) 50.0 (0.2) 50.6 (.55) 8 00 (5.24) 05 (4.) 79 (7.05) (7.98) 80 (4.96) 00 (.8) 50 (.78) 94 (7.64) 74.8 (64.9) 75.4 (66.2) 0 50 (5.24) 05 (4.) 79 (7.05) (0.02) 405 (5.94) 80 (4.96) 70 (4.57) 224 (8.82) 74.4 (64.02) 75.0 (65.5) 0 00 (5.24) 05 (4.) 79 (7.05) (0.02) 455 (7.9) 80 (4.96) 70 (4.57) 224 (8.82) 06.4 (24.57) 07.0 (25.89) 2 50 (5.24) 05 (4.) 79 (7.05) 04.8 (2.00) 485 (9.09) 450 (7.72) 95 (5.55) 244 (9.6) 06. (24.5) 06.9 (25.67) 2 00 (5.24) 05 (4.) 79 (7.05) 04.8 (2.00) 520 (20.47) 450 (7.72) 95 (5.55) 244 (9.6) 5. (.56) 5.9 (4.88) ) For dual converter: specified weight kg (6.7 lb). /66 Siemens FI US Edition

13 Siemens AG 204 Flow Measurement SITRANS FX00 a c b a c b H D D H l L d L d Sandwich version Sandwich version with pressure sensor Sandwich version EN Size Pressure Dimensions [mm (inch)] Weight [kg (lb)] rating DN PN a b c d D L H l Flowmeter Flowmeter (without (with pressure pressure sensor) sensor) (5.24) 05 (4.) 79 (7.05) 6 (0.6) 45 (.77) 65 (2.56) 265 (0.4) 44 (5.67).5 (7.72) 4. (9.04) (5.24) 05 (4.) 79 (7.05) 24 (0.94) 65 (2.56) 65 (2.56) 265 (0.4) 44 (5.67) 4. (9.48) 4.9 (0.80) (5.24) 05 (4.) 79 (7.05) 8 (.50) 82 (.2) 65 (2.56) 270 (0.6) 44 (5.67) 4.9 (0.80) 5.5 (2.) (5.24) 05 (4.) 79 (7.05) 50 (.97) 02 (4.02) 65 (2.56) 275 (0.8) 44 (5.67) 6 (.2) 6.6 (4.55) (5.24) 05 (4.) 79 (7.05) 74 (2.9) 5 (5.) 65 (2.56) 290 (.42) 55 (6.0) 8.2 (8.08) 8.8 (9.40) (5.24) 05 (4.) 79 (7.05) 97 (.82) 58 (6.22) 65 (2.56) 0 (2.20) 64 (6.46) 9.5 (20.94) 0. (22.27) Sandwich version ASME Size Pressure rating Dimensions [inch] Weight [lb] DN Class a b c d D L H l Flowmeter Flowmeter (without (with pressure pressure sensor) sensor) ½" 50, 00, " 50, 00, ½" 50, 00, " 50, 00, " 50, 00, " 50, 00, Siemens FI US Edition /67

14 Flow Measurement Siemens AG 204 SITRANS FX00 Remote version Flanged version DN ½" " ½" 2" " 4 " 6" 8" 0" 2" a [mm] [inch] b c d e f g h j k l m n p [mm] 40 Ø Ø5 Ø9 (4x) [inch] 5.52 Ø Ø4.5 Ø0.6 (4x) Sandwich version DN ½" " ½" 2" " 4 " a [mm] [inch] b c d e f g h j k l m n p [mm] 40 Ø Ø5 Ø9 (4x) [inch] 5.52 Ø Ø4.5 Ø0.6 (4x) /68 Siemens FI US Edition

15 Siemens AG 204 Flow Measurement SITRANS FX00 Flow tables Measuring Range Limits Water Size Q min Q max Q min Q max DN to EN 092- DN to ASME B6.5 EN 092- [m /h] EN 092- [m /h] ASME B6.5 [m /h] ASME B6.5 [m /h] 5 ½" " ½" " " " " " " " Values based on water at 20 C (68 F) Air Size Q min Q max Q min Q max DN to EN 092- DN to ASME B6.5 EN 092- [m /h] EN 092- [m /h] ASME B6.5 [m /h] ASME B6.5 [m /h] 5 ½" " ½" " " " " " " " Values based on air at 20 C (68 F) and.0 bar abs (4.7 psi abs ) Flow rate limits Product Nominal diameters Minimum flow rates Maximum flow rates to EN to ASME [m/s] [m/s] Liquids DN 5 DN 00 DN ½" DN 2" 0.5 x (998/) 0.5 ) 7 x (998/) 0.47 ) Gas, steam/vapor DN 5 DN 00 DN ½" DN 2" 6 x (.29/) 0.5 2) 7 x (998/) 0.47 ) = operating density [kg/m ] ) Minimum flow rate 0. m/s (0.984 ft/s), maximum flow rate 7 m/s (2 ft/s) 2) Minimum flow rate 2 m/s (6.6 ft/s) ) Maximum flow rate 80 m/s (262 ft/s); DN 5: 45 m/s (48 ft/s) and DN 25: 70 m/s (20 ft/s) Siemens FI US Edition /69

16 Flow Measurement Siemens AG 204 SITRANS FX00 Measuring range saturated steam: to 7 bar Overpressure [bar] Density [kg/m³] Temperature [ C] Flow [kg/h] min. max. min. max. min. max. min. max. DN to EN 092- DN to ASME B6.5 5 ½" " ½" " " " " " " " Measuring range saturated steam: 0.5 to 20 bar Overpressure [bar] Density [kg/m³] Temperature [ C] Flow [kg/h] min. max. min. max. min. max. min. max. DN to EN 092- DN to ASME B6.5 5 ½" " ½" " " " " " " " /70 Siemens FI US Edition

17 Siemens AG 204 Flow Measurement SITRANS FX00 Measuring range saturated steam: 5 to 00 psig Overpressure [psig] Density [lb/ft³] Temperature [ F] Flow [lb/h] min. max. min. max. min. max. min. max. DN to EN 092- DN to ASME B6.5 5 ½" " ½" " " " " " " " Measuring range saturated steam: 50 to 00 psig Overpressure [psig] Density [lb/ft³] Temperature [ F] Flow [lb/h] min. max. min. max. min. max. min. max. DN to EN 092- DN to ASME B6.5 5 ½" " ½" " " " " " " " Siemens FI US Edition /7

18 Flow Measurement Siemens AG 204 Notes /72 Siemens FI US Edition

Flow Measurement SITRANS F X SITRANS FX300 4/365

Flow Measurement SITRANS F X SITRANS FX300 4/365 Siemens AG 200 Overview vortex flowmeters provide accurate volumetric and mass flow measurement of steam, gases and liquids as an all-in-one solution with integrated temperature and pressure compensation.