Spherical Roller Bearings Units: Rexnord PT Select Series

Size: px
Start display at page:

Download "Spherical Roller Bearings Units: Rexnord PT Select Series"

Transcription

1 Spherical Roller earings Units: Rexnord PT Select Series Contents Page eatures and enefits 192 Nomenclature 193 Engineering 194 Dimensions Pillow locks 198 lange locks 202 Industries Served Aggregates Air & luid Handling Cement Construction Material Handling Package Handling Spherical Roller earings 191

2 Rexnord PT Select Series Spherical Roller earings eatures and enefi ts Rexnord PT Select Series Spherical Roller earings 1. Rugged cast iron housing 2. Total misalignment capability up to 2 degrees 3. Expansion and non-expansion units available degree mounting collar for superior holding strength Additional eatures and enefits State-of-the-art design allows increased strength while optimizing material Industry-standard dimensions for interchangeability with leading brands Standard, off-the-shelf sizes for quick turnarounds needs Rugged metal retainer for increased strength and durability Shaft ready and pre-lubricated with our standard grease for normal operation Seal Types Type T Triple Lip Seal Three points of contact (shown above) provide superior ingress protection against contaminants. Engineered bearing seals for increased product life Designed for efficiency while maintaining the overall product strength, the bearing delivers the seal performance your environment requires. Standard triple lip and clearance seal provides maximum ingress protection against contaminants which are a leading cause of bearing failure (optional labyrinth seal available) Clearance seal reduces operating temperatures at higher speeds eatures nitrile material with protective metal shield Type C Clearance Seal Also Available with These Housings 2-bolt Pillow lock 4-bolt Pillow lock 2-bolt Pillow lock Type E 4-bolt Pillow lock Type E lange lock lange lock Type E Piloted lange eatures and enefi ts Spherical Roller earings

3 Nomenclature Symbol E EP2 EP4 C P2 P4 Description /16" /16" /16" /16" /16" /2" /16" /16" /16" /2" /16" /16" T C Type E langed Unit; 4-bolt square Type E 2-olt Pillow lock Type E 4-olt Pillow lock langed Unit; 4-bolt square langed Cartridge Unit; 4-bolt round 2-olt Pillow lock 4-olt Pillow lock Triple Lip Seal Clearance Seal P C E Rexnord PT Select Series Spherical Roller earings Nomenclature lank E ixed Expansion Spherical Roller earings Nomenclature - 193

4 Rexnord PT Select Series Spherical Roller earings Engineering Section Rexnord PT Select Series Spherical Roller earing Selection Guide To select a bearing, determine the applied radial load, the applied thrust load, the desired Rating Life, and applicable operating conditions. The procedure shown here will aid in selecting a bearing to meet an L10 design life. The formulas for calculating life expectancy should be used to determine the Rating Life L10 for the bearing selected. The selection procedures and rating formulas shown here are in agreement with the American earing Manufacturers Association (AMA) standards and ANSI/ Steps for Selection Step 1 Determine an appropriate L10 design life. Operating Design L10 time, life, design life, Type of service hours per year years hours Light seasonal usage 500 to ,000 Heavy seasonal usage 1,400 to 1, ,000 Industrial 8 hour shift 2, ,000 Industrial 16 hour shift 4, ,000 Industrial continuous 8, ,000 to 100,000 Step 2 Determine a required from Table 1. Step 3 Calculate the required C and select a roller bearing. a or radial load only: P = r required C = P using from Step 2 Select a roller bearing from Table 2 with a basic load rating C equal to or greater than the required C. AMA Standards STD Ratings are based on fatigue life. The Rating Life L10 or fatigue life at 90% reliability is the usual basis for bearing selection. or radial load applications only, Table 3, can be used to select a bearing or to determine L10 life expectancy. To assure a satisfactory bearing application, fitting practice, mounting, lubrication, sealing, static rating, housing strength, operating conditions and maintenance must be considered. Step 3 (continued) b or combined radial and thrust loads: Select a trial roller bearing of the desired shaft size from Table 2. Calculate the ratio of thrust load a to the radial load r. Calculate the equivalent radial load P P = Xr + Ya If a is equal to or less than e, then P = X1r + Y1a r a r If a is greater than e, then P = X2r + Y2a r or values of e, X1, Y1, X2, and Y2, see Table 2. Calculate the required C required C = P using from Step 2. Consult Table 2, basic load rating. If a smaller bearing meets, or nearly meets, the required C, its life expectancy can be calculated. Note: If the load P is greater than.25c, consult Rexnord earing Division. Selection Guide Engineering Spherical Roller earings

5 Selection Symbols for formulas: C = basic load rating, pounds (or newtons) Co = static load rating, pounds (or newtons) e = a reference value a = thrust load, pounds (or newtons) r = radial load, pounds (or newtons) L10 = rating life, hours Table 1 Relation of L10 life and speed to earing Life Hours L10 n = speed, revolutions per minute P = equivalent radial load, pounds (or newtons) X = radial factor Y = thrust factor Speed, n Speed, n C ( P) asic ormula Life Expectancy To calculate the Rating Life L10 of any selected or trial bearing: Step 1 Determine the equivalent radial load P. a or radial load only: P = r b or combined radial and thrust load: if if or values of e, X1, Y1, X2, and Y2, consult the appropriate bearing rating Table 2. Step 2 Calculate the ratio of the basic load rating C to the equivalent radial load. Step 3 Approximate the bearing life from Table 1. Life Adjustment The Rating Life, L10, may be modifi ed for some applications in accordance with the formula where P = Xr + Ya a is equal to or less than e, then r P = X1r + Y1a a is greater than e, then r P = X2r + Y2a Ln = a1a2a3l10 Ln = Adjusted life for (100-n) % reliability, a1 = Life adjustment factor for reliability a2 = Life adjustment factor for material and processing a3= Life adjustment factor for operating conditions. or most normal applications, all factors will be taken as 1, and the Rating Life used as the selection basis or life estimate. In addition, as long as standard catalog bearings are used, a2 will be normally set equal to one. The factor a3 covers such things as lubrication, misalignment, and temperature. Some conditions that could yield a3 significantly different than unity include speeds less than DN or greater than DN, temperatures below 40 ( 40 C) or above 275 (135 C). or other possible conditions, as well as additional information on life adjustment factors, consult Rexnord earing Division. Rexnord PT Select Series Spherical Roller earings Engineering Section Spherical Roller earings Engineering Selection Guide

6 Load Ratings Rexnord PT Select Series Spherical Roller earings Engineering Section Table 2 Load Ratings and Speed Limits C Dynamic Load Rating Co Static Load Rating Approximate speed limit RPM* a/r e a/r > e e pounds newtons pounds newtons Clearance Seal Triple Lip Seal X1 Y1 X2 Y2 4 20,000 88,964 21,360 95,014 4,040 3, ,500 91,189 23, ,377 3,820 3, ,000 93,413 24, ,916 3,540 3, , ,543 30, ,071 3,150 2, , ,812 43, ,143 2,670 2, , ,377 48, ,383 2,420 2, , ,686 77, ,428 1,980 1, , ,858 98, ,595 1,760 1, , , , ,778 1,600 1, If the load P is greater than 25% of C, consult Rexnord earing Division. or setscrew mounted bearings, reduce C Dynamic Load rating by 15%. or vertical shaft application, consult Rexnord earing Division. *ased on grease lubrication and moderate load. Engineering Spherical Roller earings

7 Table 3 Radial Load Ratings in Pounds at Various RPM for Appropriate L10 Life Hours * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * If the load P is greater than 25% of the C, consult Rexnord earing Division. or setscrew mounted bearings, reduce C Dynamic Load rating by 15%. or vertical shaft application, consult Rexnord earing Division. *ased on grease lubrication and moderate load. Rexnord PT Select Series Spherical Roller earings Engineering Section Spherical Roller earings Engineering Load Speed

8 2-olt Pillow lock Rexnord PT Select Series Single Locking Collar Spherical Roller earing P2 Product eatures Corrosion-resistant powder coating Cast iron housing Misalignment capabilities - total of 2 Triple lip seal standard; optional clearance seal actory lubricated 90 grease fitting standard; straight fitting provided in box earing Dimensions Shaft Diameter Pillow locks ixed Expansion A ase to Centerline Distance etween olt Holes Part Number Part Number Height Min Max C D E H L M P S U W X 4 1-7/16 P2-107-T P2-107-TE / /16 P2-111-T P2-111-TE / /16 P2-115-T P2-115-TE / /16 P2-203-T P2-203-TE / /16 P2-207-T P2-207-TE 2-1/2 P2-208-T P2-208-TE 2-11/16 P2-211-T P2-211-TE 2-15/16 P2-215-T P2-215-TE 3-7/16 P2-307-T P2-307-TE 3-1/2 P2-308-T P2-308-TE Approx. Weight / / / /16 P2-315-T P2-315-TE Additional Notes Please call REXNORD for availability Lubrication fitting tap size, 1/8" PT ore size = nominal shaft size in/-.000 in (+0.03 mm/-0.00 mm) ase to centerline tolerance, +/-.005" or Selection Guide, Load Ratings and Speed Limits see Rexnord PT Select Series Engineering section on pages Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request. Spherical Roller earings

9 P4 Product eatures Corrosion-resistant powder coating Cast iron housing Misalignment capabilities - total of 2 Triple lip seal standard; optional clearance seal actory lubricated 90 grease fitting standard; straight fitting provided in box earing Dimensions Shaft Diameter ixed Expansion A ase to Centerline Distance etween olt Holes Part Number Part Number Height Min Max C D E G olt Hole Spacing (Width) H L M P S U W X /16 P4-115-T P4-115-TE / /16 P4-203-T P4-203-TE / /16 P4-207-T P4-207-TE 2-1/2 P4-208-T P4-208-TE 2-11/16 P4-211-T P4-211-TE 2-15/16 P4-215-T P4-215-TE 3-7/16 P4-307-T P4-307-TE 3-1/2 P4-308-T P4-308-TE Approx. Weight / / / /16 P4-315-T P4-315-TE / /16 P4-407-T P4-407-TE / Rexnord PT Select Series Single Locking Collar Spherical Roller earing Additional Notes Please call REXNORD for availability Lubrication fitting tap size, 1/8" PT ore size = nominal shaft size in/-.000 in (+0.03 mm/-0.00 mm) ase to centerline tolerance, +/-.005" or Selection Guide, Load Ratings and Speed Limits see Rexnord PT Select Series Engineering section on pages Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request. Spherical Roller earings Pillow locks olt Pillow lock

10 Rexnord PT Select Series Single Locking Collar Spherical Roller earing EP2 Product eatures Type E Interchange Corrosion-resistant powder coating Cast iron housing Misalignment capabilities - total of 2 Triple lip seal standard; optional clearance seal actory lubricated 90 grease fitting standard; straight fitting provided in box earing Dimensions Shaft Diameter ixed Expansion A ase to Centerline Distance etween olt Holes Part Number Part Number Height Min Max C D E H L M P S U W X 4 1-7/16 EP2-107-T EP2-107-TE / /16 EP2-111-T EP2-111-TE / /16 EP2-115-T EP2-115-TE / /16 EP2-203-T EP2-203-TE / /16 EP2-207-T EP2-207-TE 2-1/2 EP2-208-T EP2-208-TE 2-11/16 EP2-211-T EP2-211-TE 2-15/16 EP2-215-T EP2-215-TE 3-7/16 EP2-307-T EP2-307-TE 3-1/2 EP2-308-T EP2-308-TE Approx. Weight / / / Additional Notes Please call REXNORD for availability Lubrication fitting tap size, 1/8" PT ore size = nominal shaft size in/-.000 in (+0.03 mm/-0.00 mm) ase to centerline tolerance, +/-.005" or Selection Guide, Load Ratings and Speed Limits see Rexnord PT Select Series Engineering section on pages Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request. Type E 2-olt Pillow lock Pillow locks Spherical Roller earings

11 EP4 Product eatures Type E Interchange Corrosion-resistant powder coating Cast iron housing Misalignment capabilities - total of 2 Triple lip seal standard; optional clearance seal actory lubricated 90 grease fitting standard; straight fitting provided in box earing Dimensions Shaft Diameter ixed Expansion A ase to Centerline Distance etween olt Holes Part Number Part Number Height Min Max C D E G olt Hole Spacing (Width) H L M P S U W X /16 EP4-315-T EP4-315-TE / Approx. Weight Rexnord PT Select Series Single Locking Collar Spherical Roller earing Additional Notes Please call REXNORD for availability Lubrication fitting tap size, 1/8" PT ore size = nominal shaft size in/-.000 in (+0.03 mm/-0.00 mm) ase to centerline tolerance, +/-.005" or Selection Guide, Load Ratings and Speed Limits see Rexnord PT Select Series Engineering section on pages Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request. Spherical Roller earings Pillow locks Type E 4-olt Pillow lock

12 4-olt lange lock Rexnord PT Select Series Single Locking Collar Spherical Roller earing Product eatures Corrosion-resistant powder coating Cast iron housing Misalignment capabilities - total of 2 Triple lip seal standard; optional clearance seal actory lubricated 90 grease fitting standard; straight fitting provided in box earing Dimensions Shaft Diameter lange locks ixed Expansion A Distance etween olt Holes Part Number Part Number Square Circle C D G H J K L Mounting Surface to Collar ace M P X 4 1-7/ T -107-TE / / T -111-TE / / T -115-TE / / T -203-TE / / T -207-TE 2-1/2-208-T -208-TE 2-11/ T -211-TE 2-15/ T -215-TE 3-7/ T -307-TE 3-1/2-308-T -308-TE Approx. Weight / / / / T -315-TE / Additional Notes Please call REXNORD for availability Lubrication fitting tap size, 1/8" PT ore size = nominal shaft size in/-.000 in (+0.03 mm/-0.00 mm) or Selection Guide, Load Ratings and Speed Limits see Rexnord PT Select Series Engineering section on pages Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request. Spherical Roller earings

13 E Product eatures Type E Interchange Corrosion-resistant powder coating Cast iron housing Misalignment capabilities - total of 2 Triple lip seal standard; optional clearance seal actory lubricated 90 grease fitting standard; straight fitting provided in box earing Dimensions Shaft Diameter ixed Expansion A Distance etween olt Holes Part Number Part Number Square Circle C D G H J K L Mounting Surface to Collar ace M P X 4 1-7/16 E-107-T E-107-TE / /16 E-111-T E-111-TE / /16 E-115-T E-115-TE / /16 E-203-T E-203-TE / /16 E-207-T E-207-TE 2-1/2 E-208-T E-208-TE 2-11/16 E-211-T E-211-TE 2-15/16 E-215-T E-215-TE 3-7/16 E-307-T E-307-TE 3-1/2 E-308-T E-308-TE Approx. Weight / / / /16 E-315-T E-315-TE / Rexnord PT Select Series Single Locking Collar Spherical Roller earing Additional Notes Please call REXNORD for availability Lubrication fitting tap size, 1/8" PT ore size = nominal shaft size in/-.000 in (+0.03 mm/-0.00 mm) or Selection Guide, Load Ratings and Speed Limits see Rexnord PT Select Series Engineering section on pages Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request. Spherical Roller earings lange locks Type E 4-olt lange lock

14 Rexnord PT Select Series Single Locking Collar Spherical Roller earing C Product eatures Type E Interchange Corrosion-resistant powder coating Cast iron housing Misalignment capabilities - total of 2 Triple lip seal standard; optional clearance seal actory lubricated Straight grease fitting standard earing Dimensions Shaft Diameter ixed Part Number Expansion A Distance Pilot etween Part Number Diameter olt Holes C D H J K 4-olt L Mounting Surface to Collar ace M P Q R olt Circle Radius T U W X 4 1-7/16 C-107-T C-107-TE / / /16 C-111-T C-111-TE / / /16 C-115-T C-115-TE / / /16 C-203-T C-203-TE / / /16 C-207-T C-207-TE 2-1/2 C-208-T C-208-TE 2-11/16 C-211-T C-211-TE 2-15/16 C-215-T C-215-TE 3-7/16 C-307-T C-307-TE 3-1/2 C-308-T C-308-TE Distance etween olt Holes R olt Hole Radius C Approx. Weight / / / / / / /16 C-315-T C-315-TE / / olt /16 C-407-T C-407-TE / / T M P J L D W H Q K U A Reminder: 12 Has 6 Mounting! M X L W H D Q U A Additional Notes Please call REXNORD for availability Lubrication fitting tap size, 1/8" PT ore size = nominal shaft size in/-.000 in (+0.03 mm/-0.00 mm) Pilot diameter tolerance, in/-.002 in (+0.00 mm/-0.05 mm) ore tolerance for mounting, in/-.000 in (+0.05 mm/-0.00 mm) or Selection Guide, Load Ratings and Speed Limits see Rexnord PT Select Series Engineering section on pages Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request. Type E Piloted lange lock Engineering Spherical Roller earings

15 866-REXNORD/ (Within the US) (Outside the US) Why Choose Rexnord? When it comes to providing highly engineered products that improve productivity and efficiency for industrial applications worldwide, Rexnord is the most reliable in the industry. Commitment to customer satisfaction and superior value extend across every business function. Delivering Lowest Total Cost of Ownership The highest quality products are designed to help prevent equipment downtime and increase productivity and dependable operation. Valuable Expertise An extensive product offering is accompanied by global sales specialists, customer service and maintenance support teams, available anytime. Solutions to Enhance Ease of Doing usiness Commitment to operational excellence ensures the right products at the right place at the right time. Rexnord Company Overview Rexnord is a growth-oriented, multi-platform industrial company with leading market shares and highly trusted brands that serve a diverse array of global end markets. Process & Motion Control The Rexnord Process & Motion Control platform designs, manufactures, markets and services specified, highly engineered mechanical components used within complex systems where our customers reliability requirements and the cost of failure or downtime are extremely high. Water Management The Rexnord Water Management platform designs, procures, manufactures and markets products that provide and enhance water quality, safety, flow control and conservation Rexnord 04/18

Spherical Roller Bearings Units: Rexnord PT Select Series

Spherical Roller Bearings Units: Rexnord PT Select Series Excerpt from Rexnord Bearings Catalog #BR101-100EN Spherical Roller Bearings Units: Rexnord PT Select Series Contents Page Features and Benefits 192 Nomenclature 193 Engineering 194 Dimensions Pillow Blocks

More information

Why Choose Rexnord? 866-REXNORD/ (Within the U.S.) (Outside the U.S.)

Why Choose Rexnord? 866-REXNORD/ (Within the U.S.) (Outside the U.S.) 866-REXNORD/866-739-6673 (Within the U.S.) 414-643-2366 (Outside the U.S.) www.rexnord.com Why Choose Rexnord? When it comes to providing highly engineered products that improve productivity and efficiency

More information

Falk V-Class Gear Drives Overview. Falk V-Class Gear Drives

Falk V-Class Gear Drives Overview. Falk V-Class Gear Drives Falk V-Class Gear Drives Overview Falk V-Class Gear Drives Since its creation, the Falk V-Class has set and maintained a new standard in gear drives. Extreme industrial applications demand a gear drive

More information

FlatTop 7956 MatTop Chains Brochure. Rexnord 7956 Side-Flex MatTop Chains

FlatTop 7956 MatTop Chains Brochure. Rexnord 7956 Side-Flex MatTop Chains FlatTop 7956 MatTop Chains Brochure Rexnord 7956 Side-Flex MatTop Chains Rexnord 7956 Side-Flex MatTop Chains. Strong in Curves. Durable and Efficient. Rexnord is pleased to announce the introduction of

More information

Torque Limiter 320 Series Overview. Torque Limiter 320 Series

Torque Limiter 320 Series Overview. Torque Limiter 320 Series Torque Limiter 0 Series Overview Torque Limiter 0 Series Torque Limiter 0 Series For more than 80 years, Autogard products have led the industry in overload protection with high-quality products, design

More information

Link-Belt Cylindrical Roller Bearings

Link-Belt Cylindrical Roller Bearings Link-Belt Cylindrical Roller s These bearings require minimum space and provide maximum rated capacity. Link-Belt Cylindrical Roller s Features & Benefits - 1 Link Belt Cylindrical Roller s Features and

More information

Cement Processing Overview. Power Transmission Products & Solutions for Cement Processing

Cement Processing Overview. Power Transmission Products & Solutions for Cement Processing Cement Processing Overview Power Transmission Products & Solutions for Cement Processing Choose Rexnord to help you produce tomorrow s cement today. From specification and installation to field monitoring

More information

Why Choose Rexnord? 866-REXNORD/ (Within the U.S.) (Outside the U.S.)

Why Choose Rexnord? 866-REXNORD/ (Within the U.S.) (Outside the U.S.) 866-REXNORD/866-739-6673 (Within the U.S.) 44-643-366 (Outside the U.S.) www.rexnord.com Why Choose Rexnord? When it comes to providing highly engineered products that improve productivity and efficiency

More information

1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain

1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain 1625B-TAB Conveyor Design Manual 1625B-TAB Series MatTop Chain Contents Safety Considerations/Introduction... 2 Chain Selection... 4 Carry Section Wearstrips... 8 Return Section Wearstrips... 11 Drive

More information

Falk CT-Series Overview. Falk CT-Series

Falk CT-Series Overview. Falk CT-Series Falk CT-Series Overview Falk CT-Series A Trusted Name for Cooling Towers Falk CT-Series Gearboxes, brought to you by the makers of Addax Composite Couplings, are specifically designed for cooling tower

More information

Autogard Torque Limiter 820 Series Overview. Autogard Torque Limiter 820 Series

Autogard Torque Limiter 820 Series Overview. Autogard Torque Limiter 820 Series Autogard Torque imiter 80 Series Overview Autogard Torque imiter 80 Series Autogard Torque imiter 80 Series or more than 80 years, Autogard products have led the industry in overload protection with high-quality

More information

7956 Series MatTop Chains Design Manual Series MatTop Chains

7956 Series MatTop Chains Design Manual Series MatTop Chains 7956 Series MatTop Chains Design Manual 7956 Series MatTop Chains 1 Contents Safety Considerations/Introduction...2-3 Chain Selection - Selection Criteria...4 - Specifying and Part Number Nomenclature...5

More information

6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain

6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive

More information

Coal Mining Overview. Power Transmission Products & Solutions for Coal Mining

Coal Mining Overview. Power Transmission Products & Solutions for Coal Mining Coal Mining Overview Power Transmission Products & Solutions for Coal Mining Choose Rexnord to help you deliver tomorrow s coal today. From purchase and installation to field monitoring and service, Rexnord

More information

E920 Series Bearings. Locking Collars. Tapered Roller Bearing. Locking Collars. Rubber Contact Seal. Outer Race. One-Piece Cast Iron Housing

E920 Series Bearings. Locking Collars. Tapered Roller Bearing. Locking Collars. Rubber Contact Seal. Outer Race. One-Piece Cast Iron Housing rowning E920 Series Tapered Roller earing rowning 920 series mounted tapered roller bearings feature one-piece durable cast iron non-expansion housings with Type E mounting dimensions and limited misalignment.

More information

6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain

6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive

More information

CONTENTS. IMPERIAL - IP, ISAF and ISN

CONTENTS. IMPERIAL - IP, ISAF and ISN CONTENTS IMPERIAL - IP, ISAF and ISN Features / Benefi ts IMPERIAL.......................................................... B10-3 IMPERIAL-E........................................................ B10-8

More information

( ) x ( ) SELECTION. IMPERIAL - IP and ISAF Spherical Roller Bearing GENERAL

( ) x ( ) SELECTION. IMPERIAL - IP and ISAF Spherical Roller Bearing GENERAL IMPERIAL - ISAF UNIFIED Plummer Sleeve Bearing SLEEVEOIL SELECTION DODGE Spherical Roller Bearings have the capacity carry heavy radial loads and combined radial and thrust loads. The maximum recommended

More information

SPLIT CYLINDRICAL ROLLER BEARINGS

SPLIT CYLINDRICAL ROLLER BEARINGS SPLIT CYLINDRICAL ROLLER BEARINGS PERFORMANCE SOLUTIONS RANGE OF HOUSINGS Engineered to perform Standard support with complete housing and bearing Flange support Take up tension unit complete with housing

More information

CONTENTS. IMPERIALt. Impact Spanner Wrench. IMPERIAL Lockplate Kit... B Features / Benefits. IP Pillow Blocks Bolt

CONTENTS. IMPERIALt. Impact Spanner Wrench. IMPERIAL Lockplate Kit... B Features / Benefits. IP Pillow Blocks Bolt CONTENTS IMPERIALt Features / Benefits... B8--2 Nomenclature... B8--3 Selection... B8--6 Selection/Dimensions... B8--14 IP Pillow Blocks -- 2--Bolt IP Pillow Blocks -- 4--Bolt...... B8--14 B8--16 ISAF

More information

Potash Mining Overview. Power Transmission Products & Solutions for Potash Mining

Potash Mining Overview. Power Transmission Products & Solutions for Potash Mining Potash Mining Overview Power Transmission Products & Solutions for Potash Mining Choose Rexnord to help you deliver tomorrow s potash today. From specification and installation to field monitoring and

More information

Rexnord 6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain

Rexnord 6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain Rexnord 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Automotive Solution Breakthrough 6990 Series H4 Hybrid MatTop Chain Rexnord 6990 Series Hybrid H4 MatTop

More information

CONTENTS. Speciality Tapered Products

CONTENTS. Speciality Tapered Products CONTENTS Products Features / Benefi ts Type C............................................................ B7-2 Special Duty, Hinged Cap............................................... B7-3 All Steel............................................................

More information

Torque Limiter Series WT Overview. Torque Limiter Series WT

Torque Limiter Series WT Overview. Torque Limiter Series WT Torque Limiter Series WT Overview Torque Limiter Series WT Torque Limiter Series WT For more than 80 years, Autogard products have led the dustry overload protection with high-quality products, design

More information

THE REX DESIGN REPLACEABLE BEARING

THE REX DESIGN REPLACEABLE BEARING Bearings Rexnord Roller Bearings (English-Inch) THE REX DESIGN EASY BEARING CLEARANCE ADJUSTMENT Can be field adjusted to meet application needs. REPLACEABLE BEARING Available in Normal Duty, Medium Duty,

More information

HOW TO ORDER SPECIAL FINISHES

HOW TO ORDER SPECIAL FINISHES HOW TO ORDER There are two ways to specify DODGE Bearings. Most of the product offerings have part numbers with listings shown throughout this catalog. Use of part numbers ensures accurate order processing.

More information

TOLERANCE, INCHES UP TO 1-1/ /16 TO 2-1/ /2 TO /16 TO /16 TO assistance.

TOLERANCE, INCHES UP TO 1-1/ /16 TO 2-1/ /2 TO /16 TO /16 TO assistance. SPECIAL DUTY-DOUBLE ROW TAPERED ROLLER BEARINGS DODGE Double Row Tapered Roller Bearings have the highest capacity of all DODGE Tapered Roller Bearings. They carry heavy radial loads and combined radial

More information

Features And Benefits.IMPERIAL... B14-2.IMPERIAL-IP... B14-4.IMPERIAL-HD... B14-6 ISAF-HYD... B14-10.ISN / ISNX-HYD... B14-12

Features And Benefits.IMPERIAL... B14-2.IMPERIAL-IP... B14-4.IMPERIAL-HD... B14-6 ISAF-HYD... B14-10.ISN / ISNX-HYD... B14-12 CONTENTS - IP, ISAF and ISN Features And Benefits..................................................................... B14-2.-IP... B14-4.-HD... B14-6 ISAF-HYD...................................................................

More information

FEATURES/BENEFITS. Type E-Xtra DODGE Type E One Bearing, One Seal For Dusty or Damp Environments

FEATURES/BENEFITS. Type E-Xtra DODGE Type E One Bearing, One Seal For Dusty or Damp Environments Type E-Xtra DODGE Type E One Bearing, One Seal For Dusty or Damp Environments The Original DODGE Type E Bearing, Only Better New Dodge manufactured bearings increase load ratings 13-14% depending on size

More information

THE REX DESIGN. RUGGED HOUSING Standard material cast iron. Steel or ductile iron available on request.

THE REX DESIGN. RUGGED HOUSING Standard material cast iron. Steel or ductile iron available on request. THE REX DESIGN EASY BEARING CLEARANCE ADJUSTMENT can be field adjusted to meet application needs. REPLACEABLE BEARING Available in Normal Duty, Medium Duty, Heavy Duty and Adapter Sleeve mounting to suit

More information

FEATURES/BENEFITS. Setscrew Ball Bearings. DODGE End Covers

FEATURES/BENEFITS. Setscrew Ball Bearings. DODGE End Covers or over 70 years, DODGE has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built

More information

Marine Overview. Rexnord Products & Solutions for Marine Applications

Marine Overview. Rexnord Products & Solutions for Marine Applications Marine Overview Rexnord Products & Solutions for Marine pplications Marine pplications We are with you. very step of the way. Main and auxiliary drives Thruster Drives PTO / PTI ire ighting Pumps Pumps

More information

Rexnord 6000 Series Features SHURloK adapter mount with:

Rexnord 6000 Series Features SHURloK adapter mount with: Rexnord Roller Bearings I ZAF STYLE (SAF Replacement) ZAF 6000 No assembly required SAF 20 steps required to install The New Rexnord ZAF Style Roller BeARings Rugged One-Piece, Solid-Base Cast Iron Housing

More information

Rexnord Tollok Locking Assemblies

Rexnord Tollok Locking Assemblies Tollok Catalog Download the most up-to-date version at www.rexnord.com/documentation Rexnord Tollok Locking Assemblies Why Choose Rexnord Tollok Locking Assemblies? Why Choose Rexnord? When it comes to

More information

Bearing Reference CONTENTS. Guide S-2000

Bearing Reference CONTENTS. Guide S-2000 ONTENTS Features / Benefits... B12-2 Specifications........................................................... B12-4 How to Order... B12-4 Nomenclature...........................................................

More information

Mounted Spherical Roller Bearings

Mounted Spherical Roller Bearings ounted odular bearing assembly consisting of sealed and lubricated spherical bearing with collar (setscrew) or concentric (adapter mount) locking system contained within a variety of housings types, mounting

More information

Premium Type E Mounted Roller Bearing

Premium Type E Mounted Roller Bearing Rexnord Roller Bearings Rexnord 5000 Series Premium Type E Mounted Roller Bearing Get Your Bearings and Stay on Track Rexnord 5000 Series Premium Type E Mounted Roller Bearings help your equipment stay

More information

SELECTION. UNIFIED Pillow Block - Spherical Roller Bearings (USAF 500, 600, 200, 300 SERIES AND USDAF 23000, 23100, 23200) SHAFT TOLERANCES Shaft Size

SELECTION. UNIFIED Pillow Block - Spherical Roller Bearings (USAF 500, 600, 200, 300 SERIES AND USDAF 23000, 23100, 23200) SHAFT TOLERANCES Shaft Size UNIFIED Pillow Block - Spherical Roller (USAF 500, 600, 200, 300 SERIES AND USDAF 23000, 23100, 23200) DODGE UNIFIED Spherical Roller have the capacity to carry heavy radial loads and combined radial and

More information

Dodge ISN mounted spherical roller bearings

Dodge ISN mounted spherical roller bearings Engineered for reliability and long life Easy to install and remove Factory sealed and greased Patented sealing system for extended life Patented integral adapter mounting and dismounting system No shaft

More information

BROWNING offers a broad and complete line of mounted roller bearing products to satisfy a large variety of rugged, industrial applications.

BROWNING offers a broad and complete line of mounted roller bearing products to satisfy a large variety of rugged, industrial applications. ROLLER BEARINGS Roller Bearing Family of Products BROWNING offers a broad and complete line of mounted roller bearing products to satisfy a large variety of rugged, industrial applications. Browning roller

More information

Special Duty, Hinged Cap... B Special Duty, Hinged Cap & Traction Wheel... B Pillow Blocks... B6--56

Special Duty, Hinged Cap... B Special Duty, Hinged Cap & Traction Wheel... B Pillow Blocks... B6--56 CONTENTS Specialty Tapered Products Features/Benefits Type C... B6--2 Special Duty, Hinged Cap... B6--3 All Steel... B6--4 Specification Type C... B6--5 Special Duty, Hinged Cap & Traction Wheel... B6--22

More information

SPECIFICATIONS. Housing

SPECIFICATIONS. Housing SPECIFICATIONS Housing Grade 30 cast iron is the standard housing material except on SAFS housings. When steel housings are required, the SAFS bearing line is recommended. SPECIAL DRILLING The standard

More information

Extreme Duty mounted ball bearings

Extreme Duty mounted ball bearings 3-2 ABB Mounted bearings Metric Features/Benefits The Dodge SC/SCMED Extreme Duty ball bearing offers extended life in the toughest industrial applications. Incorporating patented Dodge-only features such

More information

SHAFT MOUNT REDUCERS. For Additional Models of Shaft Mount Reducers See Sections F & J G-1

SHAFT MOUNT REDUCERS. For Additional Models of Shaft Mount Reducers See Sections F & J G-1 SHAFT MOUNT REDUCERS PowerTorque Features and Description... -2 Nomenclature... -4 Selection Instructions... -5 Selection By Horsepower... -7 Mechanical Ratings... -12 Dimensions... -14 Accessories...

More information

UC-SERIES TIMKEN BALL BEARING HOUSED UNITS

UC-SERIES TIMKEN BALL BEARING HOUSED UNITS UC-SERIES TIMKEN BALL BEARING HOUSED UNITS UC-SERIES TIMKEN BALL BEARING HOUSED UNITS Introduction...3 Features...4 Housing Styles...5 Nomenclature...6 Technical Data...7 Installation...4 HOUSED UNIT TABLES

More information

Tighteners and Idlers

Tighteners and Idlers Tighteners and Idlers...rive Tighteners, Idlers, Idler ushings, Set ollars, Keystock and ast Iron ars wide variety of specialized products for automatic production. rowning is adding new power transmission

More information

Series 40,000 and 70,000 Catenary Belt Conveyor Idlers

Series 40,000 and 70,000 Catenary Belt Conveyor Idlers Series and 70,000 Catenary Belt Conveyor Idlers Link-Belt Series and 70,000 Catenary Belt Conveyor Idlers combine the proven capabilities of the Link-Belt roll design with the benefits of a catenary suspension

More information

CONTENTS. GRIP TIGHT Adapter Ball Bearings

CONTENTS. GRIP TIGHT Adapter Ball Bearings CONTENTS GRIP TIGHT Adapter Ball Bearings Features / Benefits.................................................... B2-2 How to Order / Nomenclature............................................ B2-4 Selection............................................................

More information

CONTENTS. D-LOK Ball Bearings

CONTENTS. D-LOK Ball Bearings CONTENTS Ball Bearings Features/Benefits.................................................. B5-2 How to Order/Nomenclature......................................... B5-4 Selection........................................................

More information

TIMKEN TYPE E TAPERED ROLLER BEARING HOUSED UNITS

TIMKEN TYPE E TAPERED ROLLER BEARING HOUSED UNITS TIMKEN TYPE E TAPERED ROLLER BEARING HOUSED UNITS 1 TABLE OF CONTENTS Grow Stronger with Timken 3 Outstanding Performance from the Bearing Expert 4 Enhanced Performance, Lower Total Cost of Ownership 5

More information

A Zy-Tech Global Industries Product

A Zy-Tech Global Industries Product A Zy-Tech Global Industries Product Worm & evel Gear Operators Another quality product from Zy-Tech Global Industries, Inc. Zy-Gear gear operators are designed for long lasting dependable service in oil

More information

FALK TM V-Class TM WhitePaper

FALK TM V-Class TM WhitePaper FALK TM V-Class TM WhitePaper New Falk V-Class Gear Drive Designed to Meet Industry Needs for Cooler, Reliable Operation Gear drives on heavy-duty material handling equipment in paper, lumber, cement and

More information

Set screw mounted ball bearings

Set screw mounted ball bearings Features/Benefits For over 70 years, Dodge has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art

More information

EPT Mounted Bearing Technical Support. Phone: FAX: Mounted Bearing Application Engineering

EPT Mounted Bearing Technical Support. Phone: FAX: Mounted Bearing Application Engineering ENGINEERING EPT Mounted Bearing Technical Support Browning Technical Services Phone: 606-564-2093 FAX: 606-564-2079 Mounted Bearing Application Phone: 219-465-2211 FAX: 219-465-2290 E-mail: browningbearing.eng@emerson-ept.com

More information

CONTENTS. Setscrew Ball Bearings

CONTENTS. Setscrew Ball Bearings CONTENTS Features / Benefits... B4-3 How to Order / Nomenclature... B4-5 Selection... B4-6 Selection/Dimensions Pillow Blocks SC - Normal Duty... B4-12 SCAH Air Handling Normal Duty... B4-16 SCB Normal

More information

THE ORIGINAL. SPLIT ROLLER BEARING Visit CooperBearings.com

THE ORIGINAL. SPLIT ROLLER BEARING Visit CooperBearings.com OVERVIE W THE ORIGINAL SPLIT ROLLER BEARING Visit CooperBearings.com THE COMPANY Since inventing the split roller bearing in 1907, Cooper has become synonymous with the manufacture of quality, long-lasting

More information

TIMKEN SPHERICAL ROLLER BEARING SOLID-BLOCK HOUSED UNITS

TIMKEN SPHERICAL ROLLER BEARING SOLID-BLOCK HOUSED UNITS TIMKEN SPHERICAL ROLLER BEARING SOLID-BLOCK HOUSED UNITS Timken SPHERICAL ROLLER BEARING SOLID-BLOCK HOUSED UNITS Overview.................................................. 2 Introduction...4 Shelf Life

More information

Timken Housed Unit Catalog Index

Timken Housed Unit Catalog Index Timken Spherical Roller Solid-Block Housed Units Timken Housed Unit Catalog Index Overview.................................................2 Introduction............................................4 Shelf

More information

CYLINDRICAL ROLLER BEARING CATALOG TIMKEN THRUST AND PLAIN BEARINGS CATALOG

CYLINDRICAL ROLLER BEARING CATALOG TIMKEN THRUST AND PLAIN BEARINGS CATALOG CYLINDRICL ROLLER BERING CTLOG TIMKEN THRUST ND PLIN BERINGS CTLOG Spherical Plain Bearings SPHERICL PLIN Overview: Timken s spherical plain bearings consist of a spherically ground inner ring housed in

More information

TIMKEN HOUSED UNIT CATALOG INDEX

TIMKEN HOUSED UNIT CATALOG INDEX Timken Spherical Roller Solid-Block Housed Units TIMKEN HOUSED UNIT CATALOG INDEX OVERVIEW.................................................2 INTRODUCTION............................................4 SHELF

More information

SRG. Caged Roller LM Guide Ultra-high Rigidity Type Model SRG. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SRG. Caged Roller LM Guide Ultra-high Rigidity Type Model SRG. Point of Selection. Point of Design. Options. Model No. Precautions on Use Caged Roller LM Guide Ultra-high Rigidity Type Model LM block LM rail End seal Endplate 45 45 Caged roller Roller 45 Cross section 45 * or the caged roller, see. Point of Selection A Point of Design Options

More information

barmesapumps.com WHAT IS AN ANSI PUMP

barmesapumps.com WHAT IS AN ANSI PUMP WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,

More information

TIMKEN HOUSED UNIT CATALOG INDEX

TIMKEN HOUSED UNIT CATALOG INDEX Timken Tapered Roller Bearing Type E Housed Units TIMKEN HOUSED UNIT CATALOG INDEX OVERVIEW.................................................2 INTRODUCTION............................................4

More information

Agriculture Leadership

Agriculture Leadership Agriculture Agriculture Leadership Agriculture customers turn to Timken for products and services that are designed for high performance, extended equipment life and enhanced productivity. Whether you

More information

Bearings. Link- Belt. Link-Belt. Max Mount. B22600 Series Spherical Roller Bearing Units

Bearings. Link- Belt. Link-Belt. Max Mount. B22600 Series Spherical Roller Bearing Units Link-Belt Bearings Link- Belt Max Mount B22600 Series Spherical Roller Bearing Units New Link-Belt Max Mount Spherical Roller Bearing Seal Variety Housing design includes Anti-Blowout Shoulder (ABS) to

More information

DODGE USN 500 and 600 Series Adapter Mount & 200 and 300 Series Direct Mount Plummer Blocks

DODGE USN 500 and 600 Series Adapter Mount & 200 and 300 Series Direct Mount Plummer Blocks DODGE USN 500 and 600 Series Adapter Mount & 200 and 300 Series Direct Mount Plummer Blocks These instructions should be read thoroughly before installation or operation. GENERAL INFORMATION WARNING: To

More information

Autogard Torque Limiter 400 Series Overview. Autogard Torque Limiter 400 Series

Autogard Torque Limiter 400 Series Overview. Autogard Torque Limiter 400 Series Autogard Torque imiter 00 Series Overview Autogard Torque imiter 00 Series Autogard Torque imiter 00 Series For more than 80 years, Autogard products have led the industry in overload protection with high-quality

More information

HOW TO ORDER/ NOMENCLATURE

HOW TO ORDER/ NOMENCLATURE HOW TO ORDER/ Setscrew Ball Bearings - Inch HOW TO ORDER There are two ways to specify DODGE Bearings. Most of the product offering have part numbers with listings shown throughout this catalog. Use of

More information

THE ORIGINAL SPLIT ROLLER BEARING. Visit CooperBearings.com

THE ORIGINAL SPLIT ROLLER BEARING. Visit CooperBearings.com OVERVIE W THE ORIGINAL SPLIT ROLLER BEARING Visit CooperBearings.com THE COMPANY Since inventing the split roller bearing in 1907, Cooper has become synonymous with the manufacture of quality, long-lasting

More information

BROWNING TAPERED ROLLER BEARINGS 900/E920 SERIES. Tapered Roller Bearings PB900 PBE920 FEATURES/BENEFITS

BROWNING TAPERED ROLLER BEARINGS 900/E920 SERIES. Tapered Roller Bearings PB900 PBE920 FEATURES/BENEFITS Dimensionally Interchangable with most Type E s Allow for Combination Radial and Thrust Loads Eccentric Lock Collar PB900 Centrap Labyrinth Seal One Piece Ductile Iron Housing Elongated Bolt Holes to Facilitate

More information

SKF Cooper split bearings

SKF Cooper split bearings SKF Cooper split bearings The company SKF Cooper is the leading supplier of split roller bearings, providing quality and long lasting products since 1907. Based in the UK, SKF Cooper designs and manufactures

More information

DRIVE CHAINS ENGINEERED STEEL DRIVE CHAINS DRIVE CHAINS

DRIVE CHAINS ENGINEERED STEEL DRIVE CHAINS DRIVE CHAINS ENGINEERED STEEL Designed to give you superior performance, even under the most punishing conditions Rugged, all-steel Rex and Link-Belt drive chains are built to perform at levels other drive chains can

More information

SPHERICAL ROLLER BEARING UNITS

SPHERICAL ROLLER BEARING UNITS SPERIC ROER ERIG UITS fyhbear i ng s.c om.0 CTOG O.b EXTR TOUG omenclature The nomenclature of a FY Spherical Roller Unit is comprised of the roller bearing unit model code which is made up using the bearing

More information

Timken Type E Tapered Roller Bearing Housed Units

Timken Type E Tapered Roller Bearing Housed Units Timken Type E Tapered Roller Bearing Housed Units Timken Premium All Purpose Industrial Grease Provides superior protection Effective in operating temperatures from -40ºF to +300ºF (-40ºC to +149ºC) It

More information

PWA-LF LOW FLOW ANSI PROCESS PUMP

PWA-LF LOW FLOW ANSI PROCESS PUMP PWA-LF LOW FLOW ANSI PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no

More information

PWA-LF LOW FLOW ANSI PROCESS PUMP

PWA-LF LOW FLOW ANSI PROCESS PUMP PWA-LF LOW FLOW ANSI PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no

More information

SKF FAG Timken NSK NTN

SKF FAG Timken NSK NTN BEARINGS Rolling vs. Sliding Provides support for machine elements, while allowing smooth motion. µ = 0.001-0.005 Plain Bearings (Sliding/Hydrodynamic/ Journal/Sleeve) Rolling-Element Bearings Types Selection

More information

ANSI Centrifugal Process Pumps. 911 Series

ANSI Centrifugal Process Pumps. 911 Series ANSI Centrifugal Process Pumps 9 Series WHAT IS AN ANSI PUMP In 977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition

More information

Mounted bearing installation and best practices for the grain industry

Mounted bearing installation and best practices for the grain industry CONVEY 18 / 7-25-20 18 Mounted bearing installation and best practices for the grain industry Marc Mondi, Territory Manager ABB/Dodge Agenda OSHA standards related to grain handling bearings Bearing myths

More information

CONTENTS. DODGE Plummer Blocks

CONTENTS. DODGE Plummer Blocks CONTENTS DODGE Plummer Blocks Features/Benefits.......................................... B12-2 How To Order............................................. B12-4 Nomenclature.............................................

More information

CENTRIK-LOK MOUNTED BALL BEARINGS 7-29

CENTRIK-LOK MOUNTED BALL BEARINGS 7-29 INEX Page Mounted Ball Bearing Engineering Section 4-6 CENTRIK-OK MOUNTE BA BEARINGS - General information - Radial oad Ratings 0- Optional Sealing Arrangements Nomenclature KC4 Krown Regal Centrik-ok

More information

TIMKEN SNT SPLIT PLUMMER BLOCKS

TIMKEN SNT SPLIT PLUMMER BLOCKS TIMKEN SNT SPLIT PLUMMER BLOCKS TIMKEN SNT SPLIT PLUMMER BLOCKS 1 TABLE OF CONTENTS INTRODUCTION... 3 TIMKEN SNT SPLIT PLUMMER BLOCKS...4 SEAL OPTIONS AND DESCRIPTIONS...6 SEAL SELECTION AND CONFIGURATION

More information

Torque Limiter T-Series Overview. Autogard Torque Limiter T-Series

Torque Limiter T-Series Overview. Autogard Torque Limiter T-Series Torque imiter T-Series Overview Autogard Torque imiter T-Series Torque imiter T-Series For more than 80 years, Autogard products have led the dustry overload protection with high-quality products, design

More information

Recommended Torque Setscrews D-LOK Mounting Bolts Recommended Torque Standard Ball Bearing Insert. EZ-KLEEN Recom. Torque. Recom.

Recommended Torque Setscrews D-LOK Mounting Bolts Recommended Torque Standard Ball Bearing Insert. EZ-KLEEN Recom. Torque. Recom. Bearing Reference ULTRA KLEEN E-Z KLEEN Extreme Duty Setscrew Ball Bearing GRIP TIGHT D-LOK Ball Bearing SELECTION Setscrew Ball Bearings Setscrew Key Hex Across Flats Recommended Setscrews D-LOK Mounting

More information

HeliFlow Industrial Series. Positive Displacement Blowers & Vacuum Pumps

HeliFlow Industrial Series. Positive Displacement Blowers & Vacuum Pumps HeliFlow Industrial Series Positive Displacement lowers & Vacuum Pumps 2 GD HeliFlow uilt y the Industry Leaders GD HeliFlow HeliFlow integrates proven experience with blower design and manufacturing techniques

More information

DODGE USAF 200/300 Direct Mount Pillow Block Bearings

DODGE USAF 200/300 Direct Mount Pillow Block Bearings DODGE USAF 200/300 Direct Mount Pillow Block Bearings These instructions must be read thoroughly before installation or operation. This instruction manual was accurate at the time of printing. Please see

More information

340 Series Double Suction Split Case Pumps

340 Series Double Suction Split Case Pumps 340 Series Double Suction Split Case Pumps Flows to: 30,000+ GPM Heads to: 550 Feet Temperatures to: 250 F 140 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in America,

More information

INSTRUCTION MANUAL FOR DODGE SAF-XT & SAFS Pillow Blocks All Sizes 1 15 / 16 " through 10 1 / 2 " 2 and 4 Bolt Base

INSTRUCTION MANUAL FOR DODGE SAF-XT & SAFS Pillow Blocks All Sizes 1 15 / 16  through 10 1 / 2  2 and 4 Bolt Base INSTRUCTION MANUAL FOR DODGE SAF-XT & SAFS Pillow Blocks All Sizes 1 15 / 16 " through 10 1 / 2 " 2 and 4 Bolt Base WARNING: Because of the possible danger to person(s) or property from accidents which

More information

WORKFORCE MUD PUMP WORKFORCE PUMP. WORKFORCE TM WWS500 Pump WORKFORCE PUMP

WORKFORCE MUD PUMP WORKFORCE PUMP. WORKFORCE TM WWS500 Pump WORKFORCE PUMP PUMP TM Pump MUD PUMP PUMP GLOBAL SOLUTIONS DESIGNING, MANUFACTURING AND PACKAGING FOR THE OFFSHORE INDUSTRY TM Reinforced, 36 Kip high strength, stress relieved, alloy-steel Pump Frame provides rigidity

More information

SC Normal Duty... SCH Expansion and Non--Expansion... SCM Medium Duty...

SC Normal Duty... SCH Expansion and Non--Expansion... SCM Medium Duty... CONTENTS Set Screw Ball Bearings eatures/benefits... B-- How To Order/Nomenclature... B--4 Selection... B--5 Selection/imensions - Pillow Block SC-- Normal uty... SCAH Air Handling Normal uty... B--0 B--4

More information

...our linkages, your solution. Rod Ends

...our linkages, your solution. Rod Ends ...our linkages, your solution Technical Information Introduction All of our rod ends incorporate either a plain spherical bearing, ball bearing, or roller bearing. Below is an overview of each type. Plain

More information

Torque Limiter 400 Series

Torque Limiter 400 Series U: + (0) 0 Germany: + (0) 0 Italy: + 0 Australia: + 00 China: + 00 India: + (0) 0 00 USA: + 0 Customerservice.ba@rexnord.com www.rexnord.eu imiter 00 Series Overview Why Choose Rexnord? When it comes to

More information

HeliFlow Industrial Series. Positive Displacement Blowers & Vacuum Pumps

HeliFlow Industrial Series. Positive Displacement Blowers & Vacuum Pumps HeliFlow Industrial Series Positive Displacement Blowers & Vacuum Pumps 2008 2 GD HeliFlow Built By the Industry Leaders Gardner Denver Tradition Quality Innovation Results GD HeliFlow HeliFlow integrates

More information

Heavy-Duty Rod Ends - Male with integral spherical plain bearing

Heavy-Duty Rod Ends - Male with integral spherical plain bearing Heavy-Duty Rod Ends - Male with integral spherical plain bearing 65700 Order No. Thread (hand) d 1 l 1 d 2 d 3 d 4 l 2 l 3 X g H7 65700.W0005 Right 5 33 M 5 11,11 18 20 9 14 65700.W0006 Right 6 36 M 6

More information

Sentry Precision Spindles

Sentry Precision Spindles Sentry Precision s Value-Priced Sentry Precision Belt-Driven s The Sentry line is our standard building block spindle and is offered as a low-cost solution for many applications that call for a precision,

More information

PWA-IL B73.2 IN-LINE

PWA-IL B73.2 IN-LINE PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP COMPETITIVE ADVANTAGES vs. Ductile Iron n High-strength, impact resistant liquid ends for improved durability and

More information

Product Brochure. Setscrew mounted ball bearings

Product Brochure. Setscrew mounted ball bearings Product Brochure Setscrew mounted ball bearings 2 ABB Motors and Generators Setscrew mounted ball bearings We provide motors, generators and mechanical power transmission products, services and expertise

More information

DODGE USAF 500 SERIES Pillow Blocks

DODGE USAF 500 SERIES Pillow Blocks INSTRUCTION MANUAL for ADAPTER MOUNTED DODGE USAF 500 SERIES Pillow Blocks WARNING: Because of the possible danger to person(s) or property from accidents which may result from the improper use of products,

More information

DODGE USAF 500 SERIES Pillow Blocks

DODGE USAF 500 SERIES Pillow Blocks INSTRUCTION MANUAL for ADAPTER MOUNTED DODGE USAF 500 SERIES Pillow Blocks WARNING: Because of the possible danger to person(s) or property from accidents which may result from the improper use of products,

More information

Classification and Characteristics of Rolling Bearings

Classification and Characteristics of Rolling Bearings 1. Classification Characteristics of Rolling Beas 1.1 Rolling bea construction Most rolling consist of s with raceway (inner outer ), rolling elements (either balls or rollers) cage. The cage separates

More information