DECK FITTINGS DECK FITTINGS
|
|
- Molly Spencer
- 5 years ago
- Views:
Transcription
1 ITTINS ITTINS TS R ONY SMP O SOM TYPS VI. MNY OTRS IN STO. T US NOW YOUR RQUIRMNTS! STOS IN T WST OST N T U. MI PON X
2 ITTINS SIN POINT MOORIN RRNMNT OR SIPS These requirements are applicable to ships intended to utilize the fittings standardized for single point moorings and include the type, strength and location of the required fittings. ship provided with mooring arrangements in accordance with the requirements of this will be eligible to be assigned the lass notation SPM (Single Point Mooring). RRNMNTS The ship is to be fitted with bow chain stoppers and/or Smit Type rackets, and bow fairleads. In addition, pedestal roller fairleads may be required for alignment purposes. T. ROUP WIT IN TONS IN SIZ (MM) O IN STOPPRS SW IN N (TONS) I < (100) II < (200) III < (200) IV (250) OW IN STOPPRS The number, chain cable size, and minimum safe working load of bow chain stoppers should be as given in Table. ow chain stoppers should be located between 2.7 m and 3.7 m aft of the bow fairlead and should be positioned so as to give correct alignment with the bow fairlead and the pedestal fairlead or the drum end of the winch or capstan. The leading edge of the stopper base plate is to be suitably faired to allow unimpeded entry of the combination chafe chain into the stopper. etails of bow chain stoppers should be submitted for class approval. SMIT TYP RTS Smit type brackets may be fitted in lieu of bow chain stoppers. The required number and safe working load is as given in Table for bow chain stoppers. Where fitted, Smit Type rackets should be located between 2.7 m and 3.7 m aft of the bow fairlead and should be positioned so as to give correct alignment with the bow fairlead and pedestal fairlead or drum end of the winch or capstan. djacent to each Smit Type racket a lug with a recommended safe working load of 490 kn (50 tons) should be attached to the doubler plate. The lug should be provided with a hole of sufficient size to accept the pin of a 490 kn (50 ton) SW shackle and should be used as a securing point for the chafe chain holding stopper. etails of Smit Type rackets should be submitted for class approval. OW IRS One centrally located bow fairlead should be provided for ships up to 150,000 tons deadweight (roups I and II). Two bow fairleads should be provided for ships larger than 150,000 tons deadweight (roups III and IV). ow fairlead opening should be at least 600 x 450 mm for 76 mm chafe chain size. Where more than one bow fairlead is installed the spacing of centers should be between 2 m and 3 m. The fairlead should be a minimum radius equal to 7 times the chain radius. PST ROR IRS Pedestal roller fairleads should have a minimum radius equal to ten times the radius of wire mooring ropes with a fiber core, seven times of wire mooring ropes with a steel core or three times the radius of synthetic mooring ropes. The number of pedestal roller fairleads should correspond to the number of bow chain stoppers or Smit Type rackets. MI PON X
3 ITTINS -MOUNT N IRRS 600 SRIS MO MX WIR SIZ WIR RIN STRNT (S) SV TR I. IMNSIONS (INS) WIT (S) M-610 3/ / / /8 14-3/ /2 270 M /4 28-3/ /4 24-5/8 17-3/4 13-1/2 5-5/8 495 M / /4 30-9/ /8 18-1/2 15-1/2 6-5/ M / /4 38-1/8 25-1/4 36-1/ /2 8-1/ M / /2 45-1/8 28-1/2 45-1/ /2 9-1/ M / / / M / /8 56-7/8 40-1/4 60-3/4 27-1/2 31-1/ M / /4 27-1/2 36-1/4 14-1/ M /2 52-3/ /2 26-1/ M / /8 52-3/ / /2 26-1/ STNR TURS esigned for reaking Strength of IPS- IWR Wire Rope with 90 Wrap on the Sheave and 180 Rotation of Swivelhead ast Steel Sheave with ardened Rope roove for onger ife Sealed rease ubricated Tapered Roller earings in Sheave and Swivelhead Weld own Mounting ase Removable uide Roller poxy Primer oating OPTION TURS ustomized esign to Suit Your pplication Tail Sheaves / Tail Rollers Stainless Steel or Nylon Sheaves olt own Mounting ase oad Monitoring System Three oat Marine Paint System Third Party ertification MI PON X
4 ITTINS -MOUNT OU SV IRRS 2600 SRIS MO MX WIR SIZ WIR RIN STRNT (S) SV TR I. IMNSIONS (INS) WIT (S) M / / / / /2 280 M / / / /4 13-1/2 5-5/8 520 M / /4 31-9/ /2 15-1/2 6-5/ M / /4 39-1/8 25-1/4 37-5/ /2 8-1/ M / /2 46-1/8 28-1/ /2 9-1/ M / / / M / /8 57-7/8 40-1/4 61-5/8 27-1/2 31-1/ M / /8 27-1/2 36-1/4 14-1/ M / / /2 26-1/ M / / / /2 26-1/ STNR TURS esigned for reaking Strength of IPS- IWR Wire Rope with 90 Wrap on the Sheave and 180 Rotation of Swivelhead ast Steel Sheaves with ardened Rope rooves for onger ife Sealed rease ubricated Tapered Roller earings in Sheaves and Swivelhead Weld own Mounting ase Removable uide Roller poxy Primer oating OPTION TURS ustomized esign to Suit Your pplication Tail Sheaves / Tail Rollers Stainless Steel or Nylon Sheaves olt own Mounting ase oad Monitoring System Three oat Marine Paint System Third Party ertification MI PON X
5 ITTINS ORIZONT UI SVS 1200 SRIS MO MX WIR SIZ WIR RIN STRNT (S) SV TR I. IMNSIONS (INS) WIT (S) M / / /2 2-3/16 85 M /2 2-3/4 150 M / / /4 200 M / /4 31-1/ / M / / /2 3-1/2 880 M /2 3-5/8 975 M / / /8 11-1/2 4-1/ M / / M / / M / / STNR TURS esigned for reaking Strength of IPS- IWR Wire Rope with 90 Wrap on the Sheave ast Steel Sheave with ardened Rope roove for onger ife Sealed rease ubricated ronze earings in Sheave Weld own Mounting ase poxy Primer oating OPTION TURS ustomized esign to Suit Your pplication Multiple Sheaves Stainless Steel or Nylon Sheaves olt own Mounting ase oad Monitoring System Three oat Marine Paint System Third Party ertification MI PON X
6 ITTINS VRTI UI SVS 1100 SRIS MO MX WIR SIZ WIR RIN STRNT (S) SV TR I. IMNSIONS (INS) WIT (S) M / / /8 10-1/4 4-1/2 65 M / /2 14-3/4 12-1/4 5-3/8 105 M / / /2 14-1/2 6-1/4 185 M / / /8 21-3/8 18-3/8 7-7/8 340 M / / /8 10-1/8 550 M / M / / /8 31-1/ / M / /2 37-3/4 16-1/ M / M / / / /8 70-3/8 31-1/ STNR TURS esigned for reaking Strength of IPS- IWR Wire Rope with 90 Wrap on the Sheave ast Steel Sheave with ardened Rope roove for onger ife Sealed rease ubricated Tapered Roller earings in Sheave Weld own Mounting ase Removable uide Roller poxy Primer oating OPTION TURS ustomized esign to Suit Your pplication Multiple Sheaves Stainless Steel or Nylon Sheaves olt own Mounting ase oad Monitoring System Three oat Marine Paint System Third Party ertification MI PON X
7 ITTINS IMPORT OU SV N IR I SIZ (IN) IMNSIONS (MM) I WIT () / / ,280 1,080 MI PON X
8 ITTINS PST IRRS WIR RIN IMNSIONS (INS) MO MX WIR SIZ WIT (S) STRNT (S) P-10 3/ P P / /4 19-5/ P / / / / P / P / ROR IRRS W MO WIR ROPR SIZ VRTI ROR ORIZONT ROR OPNIN W X IMNSIONS (INS) ROR PIN OT OS R-0 5/16 to 3/ x x x / R-1 1/2 to 7/8 4 x x x R-2 1 to 1-1/4 6 x x x R-3 1-3/ x x x S. MO WIR ROPR SIZ VRTI ROR ORIZONT ROR OPNIN W X IMNSIONS (MM) ROR PIN OT OS R-0 8 to x x x R-1 12 to x x x R-2 25 to x x x R x x x S arger sizes available upon request. MI PON X
9 ITTINS 4-ROR IR IMPORT (JIS -2026) R l2 h2 t1 h h1 R30 f l1 1 l 1 l1 t b1 14 f3 l3 f b t2 1 t3 f1 NOMIN I. RM I I1 I SW (TON) t3 alf Round Steel ar 60x Inboard 10 2 t 5 f2 t4 Rib eck NOMIN I. RM O W OPNIN I. WIR ROP I. I3 I4 R T T1 T2 T ON X WI RRN MSS () x x x x x x MI PON X
10 ITTINS PST ROR IRS - TYP U IT : W ROR I : TINSS OTR MOS ROR UTTONS Ø Ø 5.50 Ø Ø 7.75 Ø R78 R Ø 8.00 Ø MO Ø Ø 7.00 Ø MO ROR UTTONS R ROIN Ø 9.25 Ø MO R These are the finest high-loaded carrying, free-rolling roller buttons that have ever been designed, and are manufactured in sizes to suit the needs of boats, seagoing tugs and ships. Precision machined parts have working parts coated with an extremely hard coating 70 Rockwell -Scale which is corrosion resistant. The buttons will not freeze up as most do, because they are closed at the top. The air pocket formed on the inside, makes it practically impossible for water to enter the working parts. efore shipment, the roller buttons are completely lubricated and should need only occasional attention after installation and use. MI PON X
11 ITTINS ST ST UTTON OS I IMNSIONS (INS) WIT SIZ I (S) /2 5-3/4 5/8 1-1/8 1 1/2 138 IMNSIONS (INS) WIT SIZ (S) / /8 1/2 3/4 1-1/2 3/4 38 I IMNSIONS (INS) WIT SIZ (S) /2 8-5/8 5-1/4 3-11/16 3/4 7/8 75 IMNSIONS (INS) WIT SIZ I (S) / /2 3-1/2 5/8 2-1/2 3/4 1/ MI PON X
12 ITTINS ST ST SIN ITT MO IMNSIONS (INS) WIT PRT SIZ (S) -S / / MO PRT SIZ ST ST SIN ITT TRU IMNSIONS (INS) I J WIT (S) I J / /4 14 3/4 260 I J ST ST SIN ITT MO PRT SIZ IMNSIONS (INS) I J WIT (S) /4 1-1/4 1 3/4 1-1/ MI PON X
13 ITTINS ST ST OU ITTS RR SIZS N TYPS VI UPON RQUST orn Optional I J MO SIZ IMNSIONS (INS) I J WIT (S) / /8 7 5/ w/ orn /2 2-1/4 1-1/ /2 3/ / w/ orn 560 I J MO IMNSIONS (INS) WIT SIZ I J (S) / / / / /2 26-1/ / MI PON X
14 ITTINS STNR MRIN TS J M N P O P IMNSIONS (INS) PTTRN WIT J M N O P (S) / /2 1-1/ /4 1/2 2 1/2 5/8 1/2 1/ / /4 1-3/4 1-3/8 3-1/2 1-3/8 5/8 2-1/4 1/2 5/8 1/2 1/ /2 5-1/2 3-1/ /2 4-1/2 1-1/2 3/4 2-1/2 5/8 5/8 1/2 5/ /2 7-1/ / /4 2 7/8 3-1/2 1 7/8 9/16 5/ / /2 2-1/2 6-1/2 2-1/4 1-1/8 4-1/2 1-1/8 1 5/8 3/ /2 9-1/2 7-1/ /8 5-1/4 1-1/4 1-1/8 11/16 7/ / / /2 1-3/4 6-1/2 1-3/8 1-1/4 3/ /2 12-1/4 10-1/ / /2 1-1/2 1-3/8 13/16 1-1/ / / /2 2-3/8 8-1/2 1-5/8 1-1/2 7/8 1-1/ /2 15-1/ /2 2-3/4 9-1/2 1-3/4 1-5/8 15/16 1-3/ /2 16-1/2 15-1/ / / / TS J IMNSIONS (INS) J /8 1-1/4 1/2 3 5/ / /8 1-3/8 9/16 3-3/4 5/ /2 3/4 2 3/4 4-1/8 3/ / /8 2-1/2 7/8 4-1/2 7/ / /8 4-7/8 1 MI PON X
15 OU ITTS, RIT 8 TO 20 (JIS -2001) b ITTINS 1 h NOMIN I. IMNSIONS (MM) 1 b h MX.. O ROP (TON) MSS () MI PON X
16 ITTINS V J J Size J P N S O MTRI ST ST IMNSIONS (INS) I J M N O P S / /4 3/4 1/2 3/8 1-3/4 3/ / /8 7-1/ /2 1-1/2 1 9/16 1/2 2-1/8 7/8 1-1/ / / /8 1-1/4 5/8 5/8 2-1/ / / /2 3/4 3/ /4 2-1/ / /4 3/4 3/ /4 2-1/ V O N P R M O IMNSIONS (INS) M N O P R T / /2 5-1/ /2 1/ /2 1-1/8 1 3/ /8 20-1/ /8 6-7/ /4 1/2 9-1/ /8 1-1/4 1-3/8 7/ /4 23-1/ /4 8-1/ / /2 3-1/4 1-1/2 1-3/ /8 26-3/ /8 9-5/ /4 5/8 12-1/2 2-3/4 4-1/8 1-7/8 2-1/8 1-1/ /2 3/ /2 1-1/4 MI PON X
17 ITTINS MOUNT PIN O Pads for olting to Wooden ock Omitted Unless Specified on Order. 4 Q 4 Open 1 losed 2 M S 3 P M M N P T J J SIZ IMNSIONS (INS) J M N P Q R S T / /4 3 3/4 3-3/ /8 3/ /4 3-3/8 3-1/2 1-7/8 2-7/8 3/ /8 4-3/8 9-1/4 7-7/8 3-1/2 3/4 3-15/16 1-3/16 1-3/8 7/8 1-1/8 3-13/ /16 4-1/8 2-3/ /16 3/ /4 5-3/8 10-3/ /8 4-1/2 1-5/ / /4 4-3/8 4-1/2 4-3/4 2-9/16 3-3/4 1/ / /8 4-1/2 7/8 5-1/16 1-1/2 2-1/16 1-1/8 1-3/8 4-7/8 5-1/16 5-1/4 2-7/8 4-1/4 1/ /8 6-5/8 13-1/4 11-1/ /2 1-9/16 2-3/16 1-1/4 1-1/2 5-7/16 5-3/8 5-7/8 3-3/16 4-3/4 5/ /4 7-3/8 14-3/4 12-1/4 5-1/ / /16 2-3/8 1-3/8 1-5/ /16 6-1/2 3-1/2 5-1/4 5/ / /4 6-5/8 1-7/8 2-5/8 1-1/2 1-3/4 6-1/2 6-3/ /8 5-3/4 3/ /8 18-3/4 15-5/ /4 7-3/4 2-3/16 3-1/16 1-3/ /8 7-7/8 8-1/4 4-1/2 6-11/16 7/ /2 9-7/8 2-3/4 3-7/8 2-1/4 2-1/2 10-1/8 10-1/8 10-1/2 5-3/4 8-5/8 1-1/8 MI PON X
18 ITTINS OS - MOUNT, SIZ 10 X R152.4 R R OS - MOUNT, SIZ 10 X R R160 R R R MI PON X
19 ITTINS OS - MOUNT, SIZ 12 X 18 R149.3 R OS - MOUNT, TYP U SIZS 10 X X 24 IMNSIONS (MM) MSS NOMIN SIZ () 315 x x x x x MI PON X
20 ITTINS UWR MOUNT PNM O U TYP N IMNSIONS (MM) MSS () N MI PON X
21 ITTINS UWR MOUNT PNM O (JIS TYP ) IMNSIONS (MM) MSS () NOMIN SIZ MI PON X
22 ITTINS W ON ST TS STM 27 R ST ST T SIZ (INS) IMNSIONS (MM) WIT (S) MI PON X
23 ORN TS - ST ITTINS P Q J M N Weld U IMNSIONS (INS) J M N P Q U /2 1-1/4 5/ /16 5/32 11/16 11/16-9/16 9/ / /8 1-1/2 1/2 1-3/4 3/16 2-5/32 3/8 1-1/4 7/8 7/16 1-1/6 11/16 5-3/8 2-3/4 5/ /4 1-3/4 3/4 2 3/ /32 7/16 1-5/8 1-1/8 9/16 1-3/8 7/8 6-3/8 3-1/4 3/ / /2 1/4 3-7/8 9/ /4 5/8 1-3/ /4 4 1/ /2 2-5/8 1-1/8 2-3/8 5/ /16 5/8 2-1/2 1-1/2 3/4 2-1/8 1-1/8 9-1/8 5 5/ /4 1-1/4 2-5/8 5/16 5-3/8 3/4 2-3/4 1-5/8 13/16 2-3/8 1-1/4 9-7/8 5-1/2 5/8 MI PON X
24 ITTINS TOWIN P Y ore J IMNSIONS (INS) hain Size J 3/ /4 3/ /4 1-7/8 2-1/4 2-3/4 3/4 15/ /4 1-3/16 1-7/16 1-3/4 2-3/8 2-3/4 3 3/4 1-3/16 1-1/ / /32 2-1/ /4 3-1/ /16 1-1/ /4 1-7/8 2-1/ /8 4-1/2 3-7/ / /2 2-3/ / / /2 2-5/16 2-1/ /4 3-5/8 3-7/ /4 1-3/4 2-13/ /2 4-1/2 4-3/4 5-5/8 6-1/ /16 -RIN 45 IMNSIONS (MM) Tons Weight (g) MI PON X
25 RTT STRP ITTINS 2 1 PI SRIPTION PRT MTRI 1 Ratchet Strap Ring Mild Steel 2 Ratchet Strap Plate Mild Steel MO WIT (S) / /8 3/4 1-3/ ST ST -RIN MO WIT (S) / / MI PON X
26 ITTINS MOORIN ITTIN RRNMNT 30 WT TNR WIT 10 MOORIN WIRS PS PS ITM SRIPTION 1, 2 ombined nchor Windlass/Mooring Winch 3-9 Single rum Mooring Winch with Warping ead 10 Single rum Mooring Winch without Warping ead 11 Panama type airlead, 500 x 350 mm opening deck mounted 12 losed airlead, 400 x 250 mm opening deck mounted 13 Panama type airlead, 350 x 250 mm opening bulkwark mounted 14 Panama type airlead, 600 x 450 mm opening bulkwark mounted 15 Overhead Roller airlead 16 Vertical ollard, 450 mm diameter 17 Vertical ollard, 350 mm diameter 18 ruciform ollard, 300 mm diameter 19 hain Stopper for nchors 20 ow Stopper 21 Pedestal airlead T ORST PRIMRY INS UX. INS MI PON X
(fairleaders) BALANCED HEAD FAIRLEADS DECK MOUNTED DOUBLE SHEAVE SHEAVE FAIRLEADS TYPE CFF BALANCED HEAD FAIRLEADS
FAIRLEADS 4.2.2. SHEAVE FAIRLEADS Pagina 1. (fairleaders) 2.2.1. BALANCED HEAD FAIRLEADS 2.2.2. DECK MOUNTED DOUBLE SHEAVE 2.2.3. SHEAVE FAIRLEADS TYPE CFF 2.2.4. BALANCED HEAD FAIRLEADS FAIRLEADS 4.2.2.
More informationAUSTRALIAN LIFTING CENTRE PTY LTD
USTRLIN LIFTING NTR PTY LT 1300 100 120 WWW.USTLIFT.OM.U ontents Load ell 51 hain lock (W3 Series) 52 hain lock (W3 Series) 53 Lever lock (L3 Series) 54 Light uty Snatch lock 54 eavy uty Snatch lock 55
More informationHERC-ALLOY 800 CHAIN CHAIN SLINGS & COMPONENTS HERC-ALLOY 800 (GRADE 80) WORKING LOAD LIMIT: 2,100 TO 72,300 LBS. INSPECTION, CARE & USE
RI IN & TT M MNT NTS IN WORIN O IMIT: 2,100 TO 72,300 S. higher strength heat treated alloy steel chain primarily used as a sling component for overhead lifting an be used in rigging and tie down applications
More informationVic -300 Butterfly Valves
R IPS RON STL PIP ROOV VLVS 08.0 Vic -300 utterfly Valves PROUT SRIPTION ear Operator 3" with Position andle Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 PSI (065 kpa).
More informationJERGENS SPECIALTY FASTENERS TRUE LOK TOGGLE CLAMPS
JRNS SPITY STNRS TRU O TO MPS Right lamp. Right Value. True-ok. WOROIN SOUTIONS SPITY STNRS ITIN SOUTIONS 2015 jergens, inc. IM1115 15700 S. Waterloo Road. leveland, O 44110-3898 866.594.5565 jergensinc.com/spitystnrs
More informationContents - Sliding Track
ontents - Sliding Track SLIING TRK Track Series 120 2 Track Series 200 2 Track Series 450 2 Track Series 650 2 HNGRS 2 Wheel Hangers 2 4 Wheel Hangers 2 SLIING OOR HRWR Top Plate ssembly 3 SI FIX RKTS
More informationSpecialty Bearing Interchange Guide
pecialty earing Interchange uide Only one name is synonymous with the finest-quality mounted tapered and spherical roller bearings, aldor odge. We are the standard against which all other bearings are
More informationHOIST-RING SAFETY PRECAUTIONS
age 34 (Rev. 4-07) & SI ROUTS 7200 MIR RIV, WRR, MI 48092, 586-9 & SI ROUTS 7200 MIR RIV, WRR, MI 48092, 586-978-3377 OIST-RI STY RUTIOS The following safety precautions apply to all lifting devices on
More informationEMERGENCY TOWING ARRANGEMENTS HERMES" "HERACLES" & ZEUS INSTALLATION & MAINTENANCE
EMERGENCY TOWING ARRANGEMENTS HERMES" "HERACLES" & ZEUS 1) FOREWORD INSTALLATION & MAINTENANCE Emergency Towing Arrangements (ETA) "HERMES" & "HERACLES" are designed and produced by POSIDONIA SRL, Genoa
More informationSeries MBB ø32, ø40, ø50, ø63, ø80, ø100
Air Cylinder/End ock Series ø, ø, ø, ø, ø, ø ow to Order Standard ith auto switch MD A F G C D T uilt-in magnet Mounting asic/ithout bracket Axial foot Front flange Rear flange Single clevis Double clevis
More information^ % 3/2 5/2 SERIES 362/562. Features. Construction. Nominal Ambient Temp. Ranges. Electrical
Pilot Operated Stainless Steel Spool Valves xplosionproof Solenoid Valves 6 Stainless Steel odies /4" NPT / / SRIS 6/6 eatures Ideal for valve automation for the oil and gas market Reliable, robust design
More informationManual Equipment. Manual Lever Hoists L 5 H V E. L5H or SLB Series ordering menu. 62 Air Winches & Hoists L5H150 L5H300 L5H600 L5H1200
Manual Ingersoll Rand also offers manual trolleys to equip your small capacity hoists and manual hoists which are very useful for casual material handling work. Manual Lever Hoists L5H Heavy duty, high
More informationDURALINE BEARINGS N-1. DuraLine Features... N-2. Pillow Blocks... N-3 to N-6. Flange Blocks... N-7 to N-10. Flange Bracket Bearings...
URIN RIN uraine................................................. N-2 Pillow locks.................................................... N-3 to N-6 Flange locks...................................................
More information2nd EDITION STEVPRIS FLIPPER DELTA DANFORTH AC-14 SWIVEL SHACKLE DETACHABLE PEARLINK HINGE LINK LINK
STEVPRIS FLIPPER DELTA DANFORTH AC-14 SWIVEL SHACKLE DETACHABLE PEARLINK HINGE LINK LINK SHACKLE GOLDNOSE CLOSED/OPEN SOCKET GRAPNEL J CHASER 2nd EDITION JS OFFSHORE SUPPLY PTE LTD 7500A Beach Road #13-304
More informationHIGH PRESSURE RADIAL PRESSURE BLOWERS
Twin ity an INUSTRIL PROSS N OMMRIL VNTILTION SYSTMS I PRSSUR RIL PRSSUR LOWRS MOL RO MOL RS TLO 10 MY 12 WWW.T.OM I PRSSUR LOWRS OVRVIW RO I RS Model RO and RS fans from Twin ity an & lower are specifically
More informationY-fl'. MINISTRY OF TRANSPORT AND COMMUNICATIONS DEPARTMENT OF MARINE ADMINISTRATION
MINISTRY OF TRANSPORT AND COMMUNICATIONS DEPARTMENT OF MARINE ADMINISTRATION No-363/421, Corner of Merchant & Theinbyu Road, Botataung Township, Yangon, Myanmar E-mail : d gdma.mm@ gmail.com; dma.myan@smail.com
More informationNEW. ABEC 3 Double-Shielded Corrosion-Resistant Lightweight. Overall Length Overall. Length
NW Pillow lock-mounte all earings Miniature ouble-shiele orrosion-resistant ightweight Ø W Ø eatures: ubricate for the life of the bearing Meical, scientific & pharmaceutical applications Operating Temperature:
More informationAAA Metal Suppliers ABN The balustrade and marine supply specialists. Quality Stainless Steel Fittings. Contact us for a quote
Metal Suppliers N 80 076 379 587 The balustrade and marine supply specialists Quality Stainless Steel Fittings Contact us for a quote We guarantee to beat any quoted price by 10% for stock items Phone:
More informationSUPER-MAX INDUCTION MOTOR
SUPR-MX INUTIN MTR PRMIUM FFIINY SRIS PN RIP PRF FRM: 143T~5807N ompliance ertificate No.014 pplication: onstant torque 10:1 ariable torque 100:1 3-YR WRRNTY TTUN SUPRMX-P STNR FTURS PWR SUPPLY 3 phase,
More informationPetroleum Hose Reels
Petroleum ose Reels ome uel elivery In-plant Refueling Marine Refueling Off-road Vehicle/quipment Refueling ou an t uy etter Reel. amily owned and operated since 1933 MNUL OR POWR RWIN RLS Series 6000
More informationHANNAY REELS. Cable Reels. The reel leader. For use in:
able Reels NN RLS or use in: The reel leader. Rescue and az-mat Operations rounds Maintenance and Repair Video Inspection Portable Lighting roadcast/ntertainment Industry griculture uxiliary Leads for
More informationModel R. q Fig. 81-H: Standard Type: q A, q B, q C, q D, q E, q F. q Fig. C-81-H: Corrosion Resistant CONSTANT SUPPORTS.
OSA SUPPORS odel R q Fig. 81-: Standard : q A, q, q, q, q, q F q Fig. -81-: orrosion Resistant : q A, q, q, q, q, q F onstant Support Finish: Standard finish; painted with semi gloss primer. orrosion resistant;
More informationIndex MANUAL SPRING MOTOR EXTRAS. +44 (0) or visit Fuel Hose Reels. Fuel Hose Reels. Fuel Hose Reels.
Index SPRIN L ompact Hose Reels Hose I.. 6 mm - 10 mm Pressure 21 R P Performance Hose Reels Hose I.. 6 mm - 12 mm SH, MP & HP Heavy uty Hose Reels Hose I.. 6 mm - 19 mm Pressure 350 R Pressure 350 R T
More informationVic -300 Butterfly Valves
R IPS RON STL PIP GROOV VLVS Vic -300 utterfly Valves 08.02 VITULI IS N ISO 9001 RTII OMPNY PROUT SRIPTION Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 psi (2065 kpa).
More informationAPPLICATIONS FEATURES TEST INSTRUMENTS L.Q : HP HP 42851A SRF : HP 4287A SRF RDC : CHEN HWA502BC IDC : CHEN HWA CH A COLOR
HOK OILS L TYP L TYP Series PPLITIONS For VRs, olor TVs, RTs, Stereo ar Radios and Radio Transceivers, Telephone nswering, isk rivers, Personal omputers and Industrial lectronics Products, etc. FTURS PROUT
More informationIPT SE and IPT Series
IPT S and IPT (MI-T-26482 Serie I) and Tools IPT S and IPT Series and Tools Section 3057- able lamp / 3057- able lamp -2 ; -3 34 and 34- Neoprene Sleeve -4 IPT 3180- and IPT 3180-F Protective Plug overs
More informationMARINE EQUIPMENT. marine equipment marine equipment 97
MARINE EQUIPMENT 96 marine equipment marine equipment 97 Powerpack Total weight (without wire) 2.280 mm 1.280 mm 1.863 mm 2.500 kg Diesel engine Number of cylinders 4 Power 71 kw RPM 1.800 Cooling Radiator
More informationTA : TRAY PACKAGING SEE NOTE 4 TR : TRAY PACKAGING SEE NOTE 4
RI INITS IRUIT NO..0±.0 0.±0..±.0..±0.......±.0.±0..TYP. (OPTION : S LN ) ±.0 ±0.0.0±.0 0.±0..0/.0.0±.0.±0..±.0.±0..0±.0.±0. NOTS:. MTRILS: OUSIN: 'LNK'=NYLON /, ULV-, OLOR: NTURL "" =NYLON /, ULV-0, OLOR:
More informationRESOLUTION MSC.35(63) (adopted on 20 May 1994) ADOPTION OF GUIDELINES FOR EMERGENCY TOWING ARRANGEMENTS ON TANKERS
MSC 63/23/Add.1 RESOLUTION MSC.35(63) THE MARITIME SAFETY COMMITTEE, RECALLING Article 28(b) of the Convention on the International Maritime Organization concerning the functions of the Committee, RECALLING
More informationPolypropylene Lug and Wafer Style Butterfly Valve FEATURES MATERIALS OF CONSTRUCTION
180089903 Series Polypropylene Lug and Wafer Style utterfly Valve Lug Style Valve Installs between flanges. olts are threaded into tapped holes from each side of mounting flange. Valve Pressure / Temperature
More informationSECTION 14 - HINGES WDS
SION 14 - INS INS 14-1 to 14-3, Surface Mounted inges... 14-12 to 14-14, 14-23 to 14-24 Spring Released inges... 14-18 to 14-20 ift Off inges... 14-3 to 14-8, 14-11 orque inges... 14-21 xposed orner inges...
More informationDOUBLE FLANGED BUTTERFLY VALVE F 012-K1
01_1-5_0-1-e 2.01. 1:01 Uhr Seite 1 DOU NGD UTTRY VV 0-1 DOU NGD UTTRY VV 0-1 TNI DT MTRI SPIITION ND PRTS IST Nominal diameter: 11 1 1 2 ace-to-face: 7 1 15 1 1 TS-Version 1 ody 2 Seal PDM SM VSI / earing
More informationFEATURES. ANSI Class 150 or 300. Complete line of accessories. MATERIALS OF CONSTRUCTION
PL Series igh Performance Lug Style utterfly Valve The PL is a high performance lug style butterfly valve that can be equipped with a manual handle or with pneumatic or electric actuators. full range of
More information8' - 10' Dinghy NOTE: Deck Camber is actually 5 degrees downwards on Beatrix. This drawing shows it as horizontal.
Threefold purchase. Place two triple-sheave blocks 3 feet apart, with the hooks or straps facing outboard, positioning the blocks so one is face down and the other is cheek down. Start reeving in the center
More informationVG95351E7. O-Ring for use with Style B flange mount connector Glenair, Inc. CAGE Code Printed in U.S.A.
Series onnectors V95351 and V96934 Qualified onnectors V95351 and V96934 Qualified Products bout The V Specifications The erman ederal Office of efense Technology and Procurement (W) establishes procurement
More informationALLMATIC HD EXTREMELY ROBUST AND RELIABLE
20 ALLMATIC HD EXTREMELY ROBUST AND RELIABLE For mor tn 40 yrs now, ALLMATIC HD s n wtwor for rliility. Its stury sin fftivly mks it liftim invstmnt. 21 HD mnil 22 ALLMATIC HD MECHANICAL MECHANICAL HD
More informationSOLENOID VALVE ( 5/2 5/3 WAY ) 5EA SIZE 1 (M5-1/8 )
5A SIZ 1 (M5-1/8 ) SYMOL SPIFIATION ITM / TYP 5A-MM5 5A-M5 5A-M5 5A-AM5 5A-PM5 5A-M18 5A-18 5A-18 5A-A18 5A-P18 Fluid Operating Air (to be filtered by 40μ filter element) Internal Piloted Valve Type 5
More informationCSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1
Series arbon Steel ar Stock all Valves Lockout hole diameter is 8mm SSR-1 Reduced port NPT ends to NS 1.2.1 One piece body lowout-proof stem 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 4.1
More informationGP 300 Grooved Butterfly Valve
GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item
More informationG43 Welded Assembly. G43 Clevis Assemblies
Chain & Assemblies 43 Chain r-43, commonly called igh Test, is manufactured to meet ASTM & NACM. Typical uses include container securement, logging, towing, and marine industry. r-43 is available in many
More informationRight side elevation. Left side elevation
3.642 +4.692 note: dimensions including sheet metal transparent polymer panels roof metal panel 03 +3.74 06 07 +3.655 side metal 04 05 +2.072 04 garage door walk door 7.375 ront elevation side metal 3.53
More information1000 PRODUCT OVERVIEW
RI IN & TT E ENT NTS olumbus cinnon has a long history of developing innovative products that have changed the material handling industry including the development of the first alloy chain in 1933. This
More informationBimba ISO 6432 Air Cylinders
6 1 3 5 2 4 7 meets YOU NDS... eliable Service, World-Wide - rom a world-wide leader producing millions of actuators each year nvironmental - re-lubricated for longer, maintenance free operation Noise
More informationConduit Hubs, Cable Glands & Breather
onduit Hubs, able Glands & reather SSORIS onduit Hubs: or connecting conduit. Sizes - NPT. or Hazardous (classified) Locations. Zinc. able Glands: or connecting all types of cables. Sizes -4" NPT. or Wet
More informationVG95351 and VG96934 Qualified Connectors VG96934 TEN PIN CONNECTORS AND ACCESSORIES
V95351 and V96934 Qualified onnectors Series onnectors V96934 TN PIN ONNTORS N SSORIS V96934 STYL ONIURTION SRIPTION P STYL able plug with two piece shielded backshell Page 30 STYL lange mount receptacle
More information16 - Swivels & Joining Links
16 - Swivels & Joining inks Quicklinks - Stainless Stainless "C" inks 316 grade stainless steel. n alternative to shackles or snaps allowing quick entry via a threaded hexagon locking nut. S 1 R S S..
More informationSOLENOID VALVES pilot operated, high flow, heavy duty single solenoid / dual solenoid 1/4 to 1
SONOI VVS pilot operated, high flow, heavy duty single solenoid / dual solenoid 1/4 to 1 TURS Rugged forged brass bodied solenoid valves (mono- or bistable function) designed to provide maximum flow Solenoid
More informationINFORMATION SECTION. 2.3K - 3.5K Dexter Torflex Axles Assembly #10. Spring Axle Measurement. 4K - 6K Dexter Torflex Axles Assembly #11
STION INORMTION Spring xle Measurement 2K exter Sprung xles ssembly 3.5K exter Sprung xles ssembly 5.2K - 6K exter Sprung xles ssembly 7K exter Sprung xles ssembly 7.2K exter Sprung xles ssembly 8K exter
More informationJDN AIR HOISTS PROFI
JN IR HOISTS PROI JN IR HOISTS PROI arrying capacities: 550 Ibs up to 00+ metric tons ir pressure: 60 psi or 87 psi versions available Proven in practice: JN ir Hoists PROI Series are superior the most
More informationFEATURES MATERIALS OF CONSTRUCTION. Seats and Seals: EPDM. Disc and Body: PVC.
1800899055 Series PV Wafer Style utterfly Valve Wafer Style Valve Installs between flanges. olts span the body. Valve Pressure / Temperature 50 / to 00 Series butterfly valves incorporate many features
More informationPower Take-Off Clutches
IST. UTORIZO Power Take-Off lutches Superior torque control for heavy duty diesel engines Wichita has instituted quality assurance procedures aimed at achieving the ultimate in product reliability and
More informationTighteners and Idlers
Tighteners and Idlers...rive Tighteners, Idlers, Idler ushings, Set ollars, Keystock and ast Iron ars wide variety of specialized products for automatic production. rowning is adding new power transmission
More informationRADIAL PISTON (RM) AIR MOTORS
RIL PISTON (RM) IR MOTORS The Globe RM air motors are a series of compact heavy duty radial piston air motors offering and exceptional range of control valve and output options. The motors are four or
More informationFEATURES. ANSI Class 150 or 300. Complete line of accessories. MATERIALS OF CONSTRUCTION
PW Series igh Performance Wafer Style utterfly Valve The PW is a high performance wafer style butterfly valve that can be equipped with a manual handle or with pneumatic or electric actuators. full range
More informationP Series Puller 1000 and 2000 lb Capacity
P Series Puller 1000 and 2000 lb apacity eatures / Wire Puller: 4:1 design factor. Meets SM 30.21. Handle and frame are heavy gauge steel with rivet construction and slip-resistant grip. ll steel parts
More informationIndex ADDITIONAL ANCILLARY ITEMS 342 OFFSET PIPE CLAMP 115A SLING ROD CAGE PIPE ROLLER 362 ADJUSTABLE SUPPORT ROLLER CHAIR
ITIONL NILLRY ITEMS 1 Index 145 115 SLING RO GE 154 34 OFFSET PIPE LMP 31 PIPE ROLLER 11 EM LMP 348 JUSTLE PEESTL SUPPORT 13 3 JUSTLE SUPPORT ROLLER HIR 3 14 117 EM LMP 15 347 & 383 HOL OWN LMPS 35 SUPPORT
More informationWeb Slings WEB SLING HARDWARE WARNING. Steel Unilink Web Sling Hardware Combination Triangle and Choker Fitting. Slings. Web
Web Slings Steel Unilink Web Sling Hardware ombination riangle and hoker Fitting W SLING HADWA Web Slings his forged, high carbon steel fitting, functions as both a triangle and choker. Features, Advantages
More informationLP Gas Hose Reels. Home Delivery Trucks Dispensing Systems Fueling Vehicles Filling Stationary and Portable Cylinders
LP as ose Reels ome Delivery Trucks Dispensing Systems Fueling Vehicles Filling Stationary and Portable ylinders You an t uy A etter Reel. Family owned and operated since 1933 LP AS OS RLS ONTNTS annay
More informationBike Bollard R-7904 (RSA)
ike ollard R-0 (RS) General escription: The R-0 ike ollard offers versatile design and functionality. ike-locking arms are bolted internally to applications. R-0 ike ollards are made from carbon steel
More informationSKF Power Transmission products
SK Power Transmission products 100 ouplings rid couplings................ 104 ear couplings................ 109 SK lex couplings............. 119 SK lex spacer coupling........ 121 hain couplings...............
More informationNon-Metallic Track Rollers
Toll ree 800-323-0966 e-mail: sales@pcimfg.com or drawings@pcimfg.com Non-Metallic Track s eatures conomical corrosion resistant alternative to stainless steel liminates noise by elimination of metal-to-metal
More informationISO 6431/6432 Cylinders
ISO 6431/6432 ylinders ISO 6431, VDM 24562 ir ylinders 11.2-11.6 ISO 6431 11.7-11.9 ISO 6432/TOP ylinders 11.10-11.22 ISO 6432 11.23 P ir ylinders 11.24-11.26 P 11.27 ISO 6431/6432 imba ISO 6431, VDM 24562
More informationLonger lifting chain available on request
CHAIN HOIST Air Chain Hoist 248 Single Chain Fall with Pendant Control Single Chain Fall with Cord Control Double Chain Fall with Pendant Control Single Chain Fall with Cord Control Model No. Model Control
More informationYou Can t Buy A Better Reel. Family owned and operated since 1933
Spray and Pressure Washing ose Reels Pressure Washing Steam leaning Spray Operations Washdown Maintenance uto Washing Processing Plants rounds Maintenance Pest ontrol Tree Spraying Vehicle Maintenance
More informationDOUBLE ENVELOPING WORM GEAR SETS
OUL NVLOPIN WORM R STS 172 one rive Product atalog and ngineering Manual ouble nveloping Worm ears & Speed Reducers ontents one rive ear Sets...173 one rive ear Sets - Tables of acklash... 174 one rive
More informationR100/R200 Series & VR100/VR200 Series Spiral Bevel Gear Drives
R100/R200 Series & R100/R200 Series Spiral evel ear rives R100/R200 R100/R200 oston R and R 100 and 200 Series Spiral evel ear oxes are available in four sizes with horsepowers ranging from 2.19 to 50.92.
More informationMODELS SL30AC / SL40AC / SL50AC
OS S30 / S40 / S50 The andoll 4-Wheel rexel Swingast powered V forklift maximizes cube utilization while providing front loader versatility. Operator comfort, 100% power and single joystick hydraulic controls
More informationSection 6 Feet & Casters
atalog 1816-3/US ontents Section 6 155 Wadsworth, Ohio US atalog 1816-3/US Leveling Feet Leveling Foot 21-001 21-001-30 pplication 21-001 21-001-30 Series min max Max Load N (lbs) (g) 40 40 40 21-001 30
More informationWaterPumps QH QV QVK
WaterPumps Q QV QV Introduction IRON Pump /S was founded in 10 and since then the company has manufactured a great variety of pumps covering both the marine and industrial markets. Through the years the
More informationFT SERIES. FT Series Linear Actuators
T SRS OR ROR SRW TUTOR Mount virtually any servo motor ong stroke lengths available igh speed and long life Motors shown in drawings are for illustrative purposes only and are not included with T ctuators.
More informationShipboard fittings and supporting hull structures associated with towing and mooring on conventional vessels ships
(Jan 2004) (Corr.1 Feb 2004) Rev.1 July 2004) (Rev.2 Sept 2006) (Rev.3 July 2007) (Corr.1 Sept 2014) (Rev.4 Oct 2016) Shipboard fittings and supporting hull structures associated with towing and mooring
More informationSTEP SAVING VALVES FOR THE PROFESSIONAL
STP SVING VVS OR TH PROSSION RPS 4 OMPONNTS IMINTS 3 K PTHS SVS 27 MINUTS O OR liminate assemblies needed to isolate & drain any portion of a piped system Isolate & drain an entire house with simple quarter-turn
More informationYou Can t Buy A Better Reel. Family owned and operated since hannay.com Phone: Toll Free:
Spray and Pressure Washing ose Reels Pressure Washing Steam leaning Spray Operations Washdown Maintenance uto Washing Processing Plants rounds Maintenance Pest ontrol Tree Spraying Vehicle Maintenance
More informationFAMILY OWNED AND OPERATED SINCE 1933
MILY OWN N OPRT SIN 1933 Rescue and azmat Operations griculture rounds Maintenance and MRO lectric Tools Video Inspection Portable Lighting roadcast/ntertainment uxiliary Leads for Power eneration oist
More informationR.C. PLATH CO. Specialty Marine Hardware 2010 PLATH
R.C. PLATH CO. Specialty Marine Hardware 2010 PLATH Specialty Marine Hardware Portland, Oregon The finest accessories for adding safety, pleasure, and value to your craft. No craft too small or large for
More informationFEATURES TYPICAL APPLICATIONS
STL Series Resilient-Seated Lug Style utterfly Valve The STL is a resilient-seated 125/150, ductile iron, lug style butterfly valve available with either PM or UN-N seats and 316SS disc (other materials
More informationFEATURES TYPICAL APPLICATIONS
STL Series Resilient-Seated Lug Style utterfly Valve The STL is a resilient-seated 125/150, ductile iron, lug style butterfly valve available with either PM or UN-N seats and 316SS disc (other materials
More informationTECHNICAL BULLETIN U.S. ARMY TOWING MANUAL
TECHNICAL BULLETIN U.S. ARMY TOWING MANUAL Approved for public release; distribution is unlimited. HEADQUARTERS, DEPARTMENT OF THE ARMY 30 SEPTEMBER 1991 TECHNICAL BULLETIN HEADQUARTERS DEPARTMENT OF THE
More informationSWITChES NSiMASTER.indd /4/09 10:58:08 AM
SWIThS switches switchs roker, & Misellaneous swithes T. UP O IRUT UN. POLS & MPS 12 V MPS 20 V RTINGS 12-20 V VOLTG LMP OLOR TR. ONTT ONN. TYP 77010RQ 77010 on off PST 20 10 1 1 /2 @12,2 @ 20 non-lighted
More informationS4000 Superwinch Page 58
Speed raked Mechanical Winch Mechanical Winch ircuit Winch S000 Superwinch ontents Winch Kit Quick Reference Guide - lectric Winch Kit Quick Reference Guide - Manual S000 Superwinch, Spares and ccessories
More informationSTEP SAVING VALVES FOR THE PROFESSIONAL
STP SVING VVS OR TH PROSSION RPS 4 OMPONNTS IMINTS 3 K PTHS SVS 27 MINUTS O OR liminate assemblies needed to isolate & drain any portion of a piped system Winterize an entire house with simple quarter-turn
More informationOptimising overall functionality of your ships integrated anchor handling, towing, mooring and subsea load handling solutions
Optimising overall functionality of your ships integrated anchor handling, towing, mooring and subsea load handling solutions Winches Operational profitability through pioneering technology, reliability
More informationConduit Hubs, Cable Glands & Breather
onduit Hubs, able Glands & reather SSORIS onduit Hubs: or connecting conduit. Sizes - NPT. or Hazardous (classified) Locations. Zinc. able Glands: or connecting all types of cables. Sizes - 4" NPT. or
More informationFERRITE CORE SIZE / SHAPE CATALOG
RRIT INTRNTIONL TS INTRNTIONL OMPNY RRIT OR SIZ / SP TLO ORRIN N PRT NUMRS MTRIL SURVY < 20 20 30 30 40 40 50 > 50 PLNR R R PLNR T P U UR PQ RM M POT ores SL ores UP ores Toroid < 15 Toroid 15 25 Toroid
More informationBLOCKS AND DECK EQUIPMENT
BOCKS N ECK EQUIMENT CONTENTS ENOMINTION SERIES Tackle Blocks ouble Tackle Blocks Tackle Blocks with Becket ouble Tackle Blocks with Becket Tackle Blocks Stainless Return Tackle Blocks Fairlead Tackle
More informationMAIN HYDRAULIC FLANGES AND COMPONENTS
TLOG 45 RON MTRI VRSION MIN YRULI LNGS N OMPONNTS XPRIN: Over 55 Years of ependability 48,000 square foot State-of-the-rt manufacturing facility 4-bolt langes manufactured in the US QUI LIVRY: Over 5 Million
More informationCUSTOMER COPY C M D G_C M D-S2196 SECTION A-A RECOMMENDED PCB LAYOUT D C 2X A. FITS EDGECARDS THAT ACCEPT PCB's
RVISIONS RV. O. NO SRIPTION T Y 09 KY SOT IN POSITION, KY SOT TWN POSITIONS OPTION, OSOT WG 9 (RP WITH WG 0) //0 JH X.. +.00 +0..0 9.0 -.0-0. (.0 0. ) PTH ROM TOP O INSUTOR TO TOP O PIN ITS GRS THT PT.0.
More informationFenders FENDERS TOLL FREE HOUSTON (713) FAX.
Fenders (713) 644-1185 1 (800) 233-8014 249 TYPES, SIZES & EIGHTS YLINRIL RETNGULR O I Tolerances: ± 3% on faces ± 8% on bore ± 1% on length or 1/2 Tolerances: ± 4% on faces ± 8% on bore ± 1% on length
More informationBULLETIN SEPTEMBER 2009 BOS OFFSET DISC RESILIENT- SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
ULLETIN 46.00-2 SEPTEMER 2009 OS OFFSET IS RESILIENT- SETE UTTERFLY VLVES TEHNIL SPEIFITIONS Materials of onstruction 2 s (50-) 8 9 7 Wafer and Lugged esign 10 3 Wafer ody Lugged ody 6 5 4 1 2 2 s (50-)
More informationIntroduction: Nelson Lau. MEP (Marine Equipment Product) is a Total System Solution Provider. With extensive
Deck Machinery 1 Contents: Company Introduction...Page 03-04 MORDEC Winches.... Page 05-14 MORDEC Tugger Winch Page 15 MORDEC Combined Windlass /Winch... Page 16 MORDEC Anchor Handling/Towing Winch.. Page
More informationSOLENOID VALVES direct operated core disc 1/4
SOLNOI VLVS direct operated core disc 1/ U N NO 3 1 2 3/2 Series 32 TURS Three way solenoid valves with orifice and pipe connections in valve body Valves are designed to handle relatively high pressure
More informationPreliminary BLUEBOTTLE 3 PTY LTD TOUR DRAFT
2 3 4 5 6 7 8 9 0 2 LN OLOUR QUIPMNT LIST VI TYP UNITS QUIPMNT MOUNTIN WTT MX NNLS RM SIZ WIT Light 2 SLON PL3 0 2 0 Light 2 PINSPOT 300 2 2 Light 3 UN ROUP 540 3 0 Light 4 PR 64 ML 200 4.2 Light 7 MR
More informationDESIGNED FOR SAILING DESIGNED FOR SAILING
YS ittings SN O SLN ONTNTS itt type bollard 5 ow rollers 10 hain pipe 8 YS TTNS Lifting cleat eck fillers 8 eck or mast cleat 5 N rop nose pins 13 ender eyes 15 ish plate connector 11 M ixed portlight
More informationSECTION C-C SCALE 1 / 2 SECTION E-E SECTION AT-AT SCALE 1 / 2 SCALE 1 / 2 SECTION F-F SCALE 1 / 2 SECTION M-M SCALE 1 / 2 DETAIL D SCALE 2 : 1
RVIS PRT SRIPTION IN OM, TO MK - //0 Y.LI IT LRR 6 dded fillet at bottom of PM pocket in item. //0 TIO 4. R. dded a new part # //0 Y.LI T 4 (.7) Revised welding note at etail View /6/0 Y.LI WTR TIGHT Ø6.7
More informationFlame hardening steel. The height from the reference hole to the surface of the reference support block can be selected from 2 types HIGH or LOW.
is separated from the reference. INFORMTION Responses to reduction of spare parts, short lead times, and a drastic reduction of special orders Pin Plate ylinder ( machinable type) 1 HIGH type Flame hardening
More informationCable Reels. You Can t Buy A Better Reel. Family owned and operated since 1933
able Reels Rescue and azmat Operations griculture rounds Maintenance and MRO lectric Tools Portable Lighting roadcast/ntertainment uxiliary Leads for Power eneration oist and rane Operations Static rounding
More informationWE LL GIVE YOU SOMETHING TO HOLD ON TO EQUIPMENT FOR EMERGENCY TOWING. CHAIN WE OFFER A COMPLETE STOCK OF EQUIPMENT FOR EMERGENCY TOWING
Towing WE LL GIVE YOU SOMETHING TO HOL ON TO EQUIPMENT OR EMERGENY. HIN SMIT RKET PNM HOK WE OER OMPLETE STOK O EQUIPMENT OR EMERGENY RRNGEMENTS, SUH S SMIT RKETS, PNM HOKS, HING HINS, SE-LINK SHKLES N
More informationADEX Series. Air Control Valves. Section D
X Series ir ontrol alves 00.0 v.8 v.47 v ort 5 ort /8" ort Section www.parker.com/pneu/adex X iking Z asic alve unctions...00 asic alve eatures...0 ommon art umbers / R Type alves...02 odel umber Index
More informationSOLENOID VALVES pressure assisted, zero minimum, high flow floating diaphragms 1/4 to 1/2
SONOI VVS pressure assisted, zero minimum, high flow floating diaphragms 1/ to 1/2 N UX Internal ilot xternal ilot 3/2 Series 316 TURS rass and stainless steel bodied high flow pilot valves with two spring
More informationBase-Line. DC, C Systems
DC, C Systems DC system DC system is based on rails, guide rollers and carriages that provide a complete guiding system. Rails and rollers can be used as single elements. In most cases the application
More information