FERRITE CORE SIZE / SHAPE CATALOG

Size: px

Start display at page:

Download "FERRITE CORE SIZE / SHAPE CATALOG"

Derrick Black
5 years ago
Views:

RRIT INTRNTIONL TS INTRNTIONL OMPNY RRIT OR SIZ / SP TLO ORRIN N PRT NUMRS MTRIL SURVY < 20 20 30 30 40 40 50 > 50 PLNR R R PLNR T P U UR PQ RM M POT ores SL ores UP ores Toroid <

1 RRIT INTRNTIONL TS INTRNTIONL OMPNY RRIT OR SIZ / SP TLO ORRIN N PRT NUMRS MTRIL SURVY < > 50 PLNR R R PLNR T P U UR PQ RM M POT ores SL ores UP ores Toroid < 15 Toroid Toroid Toroid > 36 RO / SLUS I-ar / locks USTOM OUT

PRT NUMRS XXXXX - MTRIL R 50LL 5K 7000 010K - - - INISIN O Typically or Overall ngth imension Rounded [] Typically or round eight imension Rounded [] Typically or Overall Thickness imension Rounded

2 PRT NUMRS XXXXX - MTRIL R 50LL 5K K INISIN O Typically or Overall ngth imension Rounded [] Typically or round eight imension Rounded [] Typically or Overall Thickness imension Rounded [] n index number assigned by our application engineer to indicate gap, finishing or other requirements after firing '0000-ZZZZ 19 material, Tooled size = , 0999 is red striped gap with extra packaging for overseas shipment. TS- May or may not precede Part Number indicating manufacturer Tempel Smith errite ORRIN ORS WIT NTR L P. 3 ways a ap can be specified: MNIL P Typical Tolerance is +/ or +/ OR P - One with ap and One with no gap L Value, auss / requency / Test oil re specified 2 OR P Two of same core with gap. L Value, auss / requency / Test oil re specified ORR STOK PRTS ONLIN T: P 1

3 MTRIL SURVY TIL RRIT MTRIL UI IS VILL T LOW LOSS MTRILS Typical Values Name TLO # SRIPTION Typical pplications Optimal Temperature LTLIN 50LL Temperature stable properties. utomotive, Military, erospace Transformers, Output Inductors 25c-100c < 500Khz igher sat at elevated temperatures Under development. 100c < 500Khz 1700 P08 Low ore Loss near 750Khz Under development. 100c < 1Mhz 1700 Low Loss Power Material n Industry standard for Low Loss pplications. 70c <300Khz 2200 Low Loss Power Material Lower Loss 100c power material 100c <300Khz 2000 Power Material n Industry standard for Low Loss pplications. 100c <300Khz 2000 Power Material / igher Perm igher Inductance Power pplications 40-50c <500Khz 3000 igher frequency and better large core performance, lowest losses. igh power Transformers and Inductors. 100c < 500Khz 2000 RZYORS RQ PRM sat gauss I PRM MTRILS Typical Values Name TLO # SRIPTION Typical pplications Tc RQ PRM sat gauss Low Loss Power Material igher Power ilter applications >210c <300Khz 2000 Power Material / igher Perm igher Power ilter applications >210c <500Khz 3000 Perm Material Lower frequency ilters >170c <100Khz K Perm extended requency igher frequency ilters also Lower Losses >170c <1Mhz Perm Material ilters >170c <100Khz P 2 RRIT International Magnetics lvd dsworth, Illinois US* *

4 ORS 1 The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. imension can be made smaller, call for larger than specified. imensions [] atalog # oon Name No gap L value +/- 25% 50LL e e ^4 rams ,060 1,305 1, ,040 1,300 1, ,050 1, ,075 1,360 1, ,550 1,715 2,110 2, ,290 1,440 1,818 2, ,210 1,340 1,650 2, , , ,235 2,485 3,145 4, , ,380 1,530 1,935 2, , ,310 1,450 1,815 2, , , ,400 2,650 3,330 4,680 P 3 RRIT International Magnetics lvd dsworth, Illinois US* * X-4988 * 5k

5 ORS 2 The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. imension can be made smaller, call for larger than specified. imensions [] atalog # oon Name L No gap L value +/- 25% 50LL e e ^4 rams , , ,625 1,780 2,280 2, , , ,590 2,875 3,645 4, , , ,935 2,100 2,690 3, , , ,850 4,225 5,380 6, , , ,625 1,780 2,285 2, , , ,175 2,415 2,995 4, , , ,270 3,640 4,610 6, , , ,315 1,450 1,830 2, , , ,635 2,900 3,650 4, , , ,950 5,420 6,820 8, , , ,200 3,555 4,502 5,750 P 4 RRIT International Magnetics lvd dsworth, Illinois US* * X-4988 * 5k

6 ORS 3 The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. imension can be made smaller, call for larger than specified. imensions [] atalog # oon Name / / L 30/ L No gap L value +/- 25% 50LL e e ^4 rams , , ,485 3,870 4,905 6, , , ,500 4,975 6,440 8, , , ,115 3,460 4,380 5, , , ,105 2,330 2,940 4, , , ,840 2,035 2,590 3, , , ,990 3,260 4,125 5, , , ,695 2,950 3,735 5, , , ,145 3,495 4,425 5, , , ,290 4,770 6,040 8, , , ,870 3,230 4,050 5, , , ,925 4,410 5,520 7, , , ,045 3,385 4,285 5, , , ,055 2,320 2,910 3, , , ,300 3,670 4,645 6,275 P 5 RRIT International Magnetics lvd dsworth, Illinois US* * X-4988 * 5k

7 ORS 4 The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. imension can be made smaller, call for larger than specified. imensions [] atalog # oon Name / / No gap L value +/- 25% 50LL e e ^4 rams , , ,055 4,500 5,695 7, , , ,390 2,705 3,380 4, , , ,725 5,300 6,630 9, , , ,825 5,400 6,755 9, , , ,600 5,155 6,570 8, , , ,845 6,555 8,340 11, , , ,045 4,495 5,775 7, , , ,605 5,180 6,600 8, , , ,855 6,575 8,370 11, , , ,640 7,435 9,485 12, , , ,015 4,460 5,650 7, , , ,510 7,290 9,290 12, , , ,030 14,480 18,350 24, , , ,150 4,625 5,840 7,920 P 6 RRIT International Magnetics lvd dsworth, Illinois US* * X-4988 * 5k

8 ORS 5 The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. imension can be made smaller, call for larger than specified. imensions [] atalog # oon Name / / , No gap L value +/- 25% 50LL e e ^4 rams , , ,085 7,930 10,100 13, , , ,695 9,735 12,390 16, , , ,595 11,770 14,910 20, , , ,000 15,720 19,900 26, , , ,875 8,820 11,220 15, , , ,220 8,820 11,200 15, , , ,062 10,069 12,754 17, ,488 1, , ,520 8,275 10,580 14, , , ,220 8,020 10,160 13, , , ,245 12,495 15,825 21, , , ,635 7,450 9,485 12, ,334 1, , ,260 5,880 7,110 10, ,550 1, , ,767 9,800 11,850 16, ,334 2, ,149, ,967 5,464 7,451 12, ,856 2, ,532, ,621 7,283 9,325 16,553 P 7 RRIT International Magnetics lvd dsworth, Illinois US* * X-4988 * 5k

9 PLNR ORS The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. The "" dimension may be adjusted in most cases. imensions [] atalog # oon Name e e No gap L value +/- 25% 50LL ^4 rams ,309 1,440 1, ,244 3,569 4, , , ,189 5,708 7, , , ,613 7,274 9, , , ,719 7,391 10, , , ,846 8,630 11, , , all , , all , , all , , P 8 RRIT International Magnetics lvd dsworth, Illinois US* * 7,858 8,643 11,787

10 ORS The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. imensions [] atalog # oon Name S e ^4 rams No gap L value +/- 25% 50LL , LL , LL , LL , , e P 9 RRIT International Magnetics lvd dsworth, Illinois US* * X-4988 * 4,310 4,800 LL 6,465

11 R ORS The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. imensions [] atalog # oon Name R R28L R35 R35L R R39L R45 R45 R48 R54 R No gap L value +/- 25% 50LL e e ^4 rams , ,380 3,760 4, , ,835 3,150 3, , LL , LL , ,800 4,180 5, , ,080 3,388 4, , LL , LL , , LL , LL P 10 RRIT International Magnetics lvd dsworth, Illinois US* * X-4988 * 5,200 5,720 7,800

12 PLNR R ORS The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. ig 1 I 2 imensions [] atalog # oon Name ig ig ig ig ig ig ig ig ^4 rams No gap L value +/- 25% 50LL LL LL LL , LL , LL , LL , LL e e P 11 RRIT International Magnetics lvd dsworth, Illinois US* * X-4988 * 1,450 1,595 2,175

13 T ORS The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. imensions [] atalog # oon Name T T T T T T T e No gap L value +/- 25% 50LL e ^4 rams , ,580 2,850 3, , ,310 3,210 4, , ,170 3,520 4, , ,250 4,360 5, , ,340 4,825 6, , , P 12 RRIT International Magnetics lvd dsworth, Illinois US* * X-4988 * LL 6,160 6,840 8,665

14 P ORS The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. imensions [] atalog # oon Name P P P P P20 No gap L value +/- 25% 50LL e e ^4 rams ,100 1,120 1,240 2, ,060 1,080 1,200 2, ,565 1,590 2,000 3, ,400 2,655 3,100 4, , P 13 RRIT International Magnetics lvd dsworth, Illinois US* * LL 5k

15 ORS The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. imensions [] atalog # oon Name e e No gap L value +/- 25% 50LL 5k ^4 rams LL LL , , ,065 1,452 2, , , ,566 1,740 2,349 3, , , ,480 2,755 3,719 6, , , ,471 2,745 3,706 6,239 P 14 RRIT International Magnetics lvd dsworth, Illinois US* * X-4988 *

16 U ORS The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. The "" dimension may be adjusted in most cases. U ores ffective Parameters are as mated UU. I-bars available for most cores. I 1 I 2 oon Name I I I I I I I I I I I I I 1 I 3 imensions [] atalog # e e No gap L value +/- 25% 50LL ^4 rams ,092 1,201 1, , , ,064 1,170 1, , , ,995 2,194 2, , , ,368 5,905 8, , , ,391 1,531 2, , , , , ,955 6,551 8, , , ,134 7,848 10, , , ,410 5,951 8, , ,251,356 1,690 10,817 11,899 16, , ,492,315 1,149 8,180 8,998 12, , ,984,042 1,540 5,962 6,558 8, ,081,286 1,033 5,258 5,783 7,887 P 15 RRIT International Magnetics lvd dsworth, Illinois US* *

17 UR ORS The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. Section - Section - W IUR 1 IUR 2 oon Name ig ig ig ig ig ig ig ig ig ig 3 IUR 3 ^4 rams IUR 4 No gap L value +/- 25% 50LL , , ,796 1,995 2, , , ,047 2,265 3, , , ,039 2,266 3, , , ,845 2,050 2, , , ,620 1,800 2, ,176 1, , ,410 2,325 3, ,355 1, , ,332 2,100 2, ,795 1, , ,099 2,332 3, ,023 2, , ,088 2,320 3, ,906 3, , ,728 1,920 2,618 imensions [] atalog # R 5.84 R 5.84 R 5.84 R 5.84 R R 7.92 R 7.92 R R R R R e e P 16 RRIT International Magnetics lvd dsworth, Illinois US* *

18 PQ ORS The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. imensions [] atalog # oon Name PQ PQ PQ PQ PQ PQ PQ PQ PQ No gap L value +/- 25% 50LL e e ^4 rams , , ,295 3,625 4, , , ,720 2,992 4, , , ,675 6,243 8, , , ,690 5,159 7, , , ,215 7,937 10, , , ,760 5,236 7, , , ,915 5,407 7, , , ,640 5,104 6, , , P 17 RRIT International Magnetics lvd dsworth, Illinois US* * LL

19 RM ORS The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. ores have standard notches on W for clips. imensions [] atalog # oon Name RM RM RM RM RM RM RM MX MX MX e e No gap L value +/- 25% 50LL ^4 rams ,000 2,200 3,000 5, ,500 2,750 3,750 6, ,300 3,630 4,950 8, ,400 4,840 6,600 11, ,450 15,750 P 18 RRIT International Magnetics lvd dsworth, Illinois US* * 5k LL LL 6,300 6,930

20 M ORS The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. imensions [] atalog # oon Name M M M M M I e ^4 rams No gap L value + 30% / - 20% 50LL , ,930 7,623 9,148 62, , ,280 9,200 11, , , ,000 10,000 12, , , LL ,000 1,517 2,608,973 1,940.0 LL , e 87 P 19 RRIT International Magnetics lvd dsworth, Illinois US* *

21 POT ORS The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. atalog # oon Name imensions [] NOM NOM NOM NOM NOM NOM NOM NOM NOM NOM MX MX MX MX MX MX MX MX MX MX ^4 Set Weight rams ,130 1,240 1, ,565 1,720 2, ,100 2,350 2, , , ,125 3,440 4, , , ,805 4,230 5, , , ,670 6,300 6, , , ,915 7,685 9, , , ,785 9,760 11, , , ,198 10,219 12, , , e e P 20 RRIT International Magnetics lvd dsworth, Illinois US* * Ungapped L value +/- 25% 50LL Ui 2000 Ui 2200 Ui 3000 LL

22 SL ORS The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. atalog # oon Name imensions [] MX 6.00 MX 7.60 MX 7.60 MX 9.70 MX 9.70 MX ^4 Set Weight rams ,625 1,820 1, ,625 1,820 1, ,840 3,120 3, ,840 3,120 3, ,075 4,530 6, ,900 3,220 4,300 e e P 21 RRIT International Magnetics lvd dsworth, Illinois US* * Ungapped L value +/- 25% 50LL Ui 2000 Ui 2200 Ui 3000

23 UP ORS The "" & "" dimension can be made smaller than specified, all for "&" imension larger than specified. up cores can be mated with Slab Sided or Pot ores atalog # oon Name imensions [] MX 9.70 MX e e ^4 P 22 RRIT International Magnetics lvd dsworth, Illinois US* * Set Weight rams Ungapped L value +/- 25% 50LL Ui 2000 Ui 2200 Ui 3000

24 TOROI 1 The eight of many toroids can be adjusted over a range of values. imensions are for uncoated parts and tumbled cores. Standard tumbling will break the sharp edges edges of core. oating will add a maximum of to the surface. Toroids can be gapped as requested. imensions [] atalog # e e No gap L value +/- 25% 5k 50LL 7000 oon Name O I t ^ rams P 23 RRIT International Magnetics lvd dsworth, Illinois US* *

25 TOROI 2 The eight of many toroids can be adjusted over a range of values. imensions are for uncoated parts and tumbled cores. Standard tumbling will break the sharp edges edges of core. oating will add a maximum of to the surface. Toroids can be gapped as requested. imensions [] atalog # e e No gap L value +/- 25% 5k 50LL 7000 oon Name O I t ^ rams P 24 RRIT International Magnetics lvd dsworth, Illinois US* *

26 TOROI 3 The eight of many toroids can be adjusted over a range of values. imensions are for uncoated parts and tumbled cores. Standard tumbling will break the sharp edges edges of core. oating will add a maximum of to the surface. Toroids can be gapped as requested. imensions [] atalog # e e No gap L value +/- 25% 5k 50LL 7000 oon Name O I t ^ rams P 25 RRIT International Magnetics lvd dsworth, Illinois US* *

27 TOROI 4 The eight of many toroids can be adjusted over a range of values. imensions are for uncoated parts and tumbled cores. Standard tumbling will break the sharp edges edges of core. oating will add a maximum of to the surface. Toroids can be gapped as requested. imensions [] atalog # e e No gap L value +/- 25% 5k 50LL oon Name O I t ^ rams LL LL LL LL LL P 26 RRIT International Magnetics lvd dsworth, Illinois US* *

28 RO & SLU ORS The OL dimension can be made smaller than specified, all for OL imension larger than specified. Slugs can be stacked on threaded rod or glued to create longer rod. imensions [] atalog # oon Name O OL round nds L/ Weight RTIO rams NO NO NO NO NO NO YS YS YS P 27 RRIT International Magnetics lvd dsworth, Illinois US* *

29 I-R / PLT / LOK The dimensions can be made smaller than specified, all for larger imension larger than specified. Surfaces can be ground for tighter tolerances and assembly into larger cores. imensions [] atalog # oon Name Weight TYPIL RIN rams 2 Sides Sides Sides Sides Sides Sides Sides Sides Sides Sides Sides Sides Sides Sides P 28 RRIT International Magnetics lvd dsworth, Illinois US* *

sintered. Samples produced this way have the same characteristics as they would if they were molded in production.

30 USTOM M We design and fabricate our own carbide tooling to produce custom core sizes and shapes. PROTOTYPS We also make small quantities of custom cores for prototypes by machining a block of pressed ferrite material before it is sintered. Samples produced this way have the same characteristics as they would if they were molded in production. J N J K W I gap 1 (2) 2 TRU SLI and I We can cut and grind blocks and slugs for custom and distributed gap applications. locks are also used for shielding and focusing induction heating. P 29

31 istory errite International was established 1985 as a division of Tempel Steel ompany and was purchased in 1990 by Tempel Smith. Quality Policy To provide the highest value magnetic materials to our customers through a combination of exceptional quality, price, delivery and service. errite International is compliant to ISO International nvironmental Regulatory ompliance RoS * R * LV * W * alogen ree Social ccountability ompliance US amily and Medical ave ct US nvironmental Protection gency US lean ir ct US National Primary rinking ter Regulation US air Labor Standards ct US Occupational Safety and ealth distration US qual mployment Opportunity oission US onflict ree Minerals rranty / isclaimer "TS International" expressly warrants to the "uyer" for whom it manufactures, sells and delivers product made of magnetic materials will conform to specifications and drawings as published within the product catalog. uyer specifications that have not been approved by the International lectronic oission shall be considered as a custom product, and will be warranted by TS International in a separate written agreement. There are no other express or implied warranties which extend beyond the above-referenced warranty of conformance to the specifications and specifically. TS International does not warrant that any product will be merchantable or fit for the particular purpose for which the purchaser, its successors, agents or affiliates, intends to use product. efore using these products, buyer agrees to detere suitability of the product for their intended use or application. uyer shall notify TS International in writing (and reasonable detail) of any defect in any product within thirty (30) days after the delivery date thereof. If products do not conform to the specification and TS deteres to its satisfaction that the parts are defective, and the defect is not due to miss-use, accident or improper application, buyer's remedy shall be limited, at TS international's sole discretion, to either (1)The return of such product in exchange for the return of, or credit for any payment received by TS International relating thereto; (2) The replacement of such product; or (3) The repair of such product. TS International shall pay reasonable shipping costs incurred in connection with the return, replacement or repair of any defective product. Solution to resolve defective product shall be within (60) days after written receipt of written notice from the buyer of such defect. TS International shall not be liable for any incidental or consequential loss, damage, or expense (including without limitation, economic loss or lost profits) of buyer for any defective product sold and delivered to the buyer regardless or whether such loss, damage or expense results from breach of contract or warranty or coission of tort (including, without limitation, strict liability or negligence). These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury, uyers that are using or selling these products for use in such applications do so at their own risk and agree to indemnify TS International for any damages resulting from such application. P 30

Female Plug. connecting to Fuel Quantity

Female Plug. connecting to Fuel Quantity **Ag Diesel Solutions recommends replacing the Transorb/Suppressor Diode before the installation of this module*** Red wire = 12V Constant power. Male Plug connecting to Fuel Quantity Valve Black wire