Standard Products Catalog

Size: px
Start display at page:

Download "Standard Products Catalog"

Transcription

1 Standard Products atalog nduction Permanent Magnet rushless Right ngle earmotors s ontrols Upgraded 3-Phase s! pages 8 bodine-electric.com S-17a

2 / SQ MX MX ± ±.008 NOT MNE.92±.02 LT.450 [4] #10-32 UN MN PRT NO./REV: SEET: 1/1 SLE: 1: SQ MX TYP (1.326) TYP 2 1 ESRPTON: ERMOTOR 222EL-3/4 1 UNLESS OTERWSE SPEE: UNTS RE N NES [mm] TOLERNES:.XX:±.01.XXX:±.005 NLES: X :±3 X.X :±0.5 (.582) TYP TYP or 2/3 drawings and distributor locations, go to Our website features the latest product specifications, technical documents, connection diagrams and instruction manuals. imension drawings and 3 models can be imported from the website directly into most software programs. You will also find information about odine s newest products, our distributor locator, and helpful Tech Tools designed to answer the most commonly asked motion control questions. ONE ELETR OMPNY NM0216 REPRESENTTVE O MOEL NUMER(S): UL/S Safety ompliance Products are marked curus conform to UL standard 1004 or UR/S, and most products and S standard 22.2 No. meet E. ll products are also 100. They are documented in RoS OMPLNT RoS compliant. UL file number E47177 and s and gearmotors S file number LR2797. Electronic controls conform to UL standard 508 and S standard 22.2 No. 14. They are documented in UL file number E44529 and S file number LR Options or the comparative advantages of motors and gearmotors, see page 21. Variable speed Pacesetter motors Voltage ratings are 230 V, 60 z (3-phase) or 230/460 V, 60 z (3-phase) ixed-speed motors Voltage ratings are 115 V, 60 z (single-phase) or 230 V, 60 z (3-phase) Metric voltage ratings are 230 V, 50 z (1- or 3-phase) Permanent Magnet motors Voltage ratings are 12/24 V, 24 V, 90/130 V or 130 V Metric voltage rating is 180 V ompatible with 90 V controls (90/130 V and 130 V only) rushless (EM) motors Voltage ratings are 24 or 130 V Variable Pacesetter nverter uty ixed- Permanent Magnet rushless NTER L 30R 34R 42R 48R K-2 30R 34R 42R 48R Power (P) 1/25-1/17 1/8-1/4 3/8 1/3-3/4 1/1600-1/200 1/-1/30 1/15-1/5 1/12-1/4 1/5-1/2 1/50-1/7 1/16-1/3 1/4-1/2 1/16-1/5 1/5-3/8 1/16-1/8 1/4 (oz-in.) Rated , , , 1550, 1800, , 1800, 1700, 1800, , , , 11, , 10, , 10, opyright atalog data subject to change without notice. ll rights reserved. Printed in the U.S.. 2 TLO S-17a.3 odine Electric ompany

3 Table of ontents earmotors TORQUE ERE SPETONS MENSONS Parallel up to 120 oz-in Type /T (K-2) up to lb-in Type up to 120 lb-in Type Z up to 210 lb-in Type WX up to 350 lb-in Type X up to 350 lb-in Type E//X up to 1,000 lb-in Type up to 1,000 lb-in Type Right ngle up to 37 lb-in Type 3N/ up to 77 lb-in Type 5R/5L up to 121 lb-in Type 5N up to 121 lb-in Type up to 148 lb-in Type 3R up to 296 lb-in Type up to 380 lb-in Type ollow s Without earing MOTOR TYPE POWER SPETONS MENSONS s from 3.5 to 68 oz-in Variable Pacesetter nverter uty from 1/25 to 3/4 P ixed nduction up to 1/2 P Permanent Magnet up to 1/2 P rushless up to 1/2 P irect rive rushless e-torq... up to 3.5 P ontrols Pacesetter nverters (for 230V s) ontrols (for 12/24 and 90/130V s) rushless ontrols (for 12/24V and 130V s) ccessories Reference rawings and imensions Purchase a odine gearmotor and speed control together and get our extended 2-year system warranty. system warranty Metric s and earmotors Metric Parallel up to 0.67 Nm Type /T (K-2) up to 11.3 Nm Type up to 11.3 Nm Type Z up to 19.8 Nm Type W up to 35.0 Nm Type E/ Metric Right ngle up to 16.7 Nm Type up to 10.5 Nm Type 5N/ up to 14.2 Nm Type up to 43.0 Nm Type Metric s without earing up to 1 Watts ixed nduction up to 112 Watts Permanent Magnet Most products are marked as and are RoS OMPLNT Reference ollow earmotor enefits Safe Operating and rea ommon bbreviations omparative dvantages of s and earmotors Regulation of Permanent Magnet s TLO S-17a.3 3

4 Right ngle earmotors 3N/3 Right ngle earmotors up to 37 lb-in. Unvented gearhousing for universal horizontal mounting Permanently lubricated with high-performance lubricant ronze gear for high shock load capability ardened and ground worm for high strength and long life s with accessory shafts are ideal for mounting encoders or brakes See page 34 for capacitors and accessories See pages 38 and for reference dimensions Variable Pacesetter nverter uty earmotors ixed Rating Variable (SO) Ratings 1 230V Product Type ear Range z (lb-in.) P Ratio Range (z) Type (lb-in.) (lb-in.) (lb-in.) Three-Phase, nverter uty, Non-synchronous (TENV) constant N variable N2292 Type 30R-3N constant N2293 1/ R4EPP-3N Pacesetter variable variable N variable N2297 ixed earmotors Rated Radial Load apacitor P V z Ph mps ear Ratio Product Type (lb-in.) (µ/v) Permanent Split apacitor, Non-synchronous PTOR S REQURE / /250 34R Type 34R Permanent Magnet earmotors No Rated Rated urrent (mps) Peak Radial ccy ccy No ccy ear ccy Load Product Type P Ratio (lb-in.) (lb-in.) 24V 130V 24V 130V rom Of Type N4899 N4699 N ( from N4898 N4698 N base of gearhead) / EPM-3 N4896 N4696 N N N N4893 N4693 N rom Of N Type 24-3 ( from / EPM base of motor) N0084 ollow 24 V s With lass Temperature Rating N /13 244EPM-3/ N V/130 V s With lass Temperature Rating 29/42 35 / /63 29 / Type 24-3/ 1/23 / 1.4 / ollow 86/ / / EPM-3/ / / / / / rushless earmotors Rated Rated urrent (mps) Peak Radial ccy No ccy ccy No ccy ear Load Product Type P Ratio (lb-in.) 24V 130V (lb-in.) 24V 130V N N3421 N N3666 N3566 N / EL-3N 3667 N3567 N3423 N N3668 N N3324 Type 22-3N N3669 N3569 N TLO S-17a.3 odine Electric ompany

5 Output ontrol nput Range ear Volts ontinuous Product Type 2 Type SR Type V Type SR Type V (lb-in.) Ratio P (V) mps nalog nterface igital nterface N3865 N N / EL/**-3N N3867 N N N3869 N3769 ollow N8865 N N8866 N / EL/**-3/ N8867 N N8868 N N8869 N8769 NTERmotor L earmotors Type 22/SR-3N NTERmotor Type 22/SR-3/ NTERmotor ollow up to 77 lb-in. Right ngle earmotors 5R/5L Unvented gearhousing for universal horizontal mounting Permanently lubricated with high-performance lubricant ronze gear for high shock load capability ardened and ground worm for high strength and long life See page 34 for capacitors and terminal boxes See page 38 for reference dimensions ixed earmotors Rated Radial Load apacitor P V z Ph mps ear Ratio Product Type (lb-in.) (µ/v) 34R-5R Permanent Split apacitor, Non-synchronous, lass Temperature Rating (TE) PTOR S REQURE / /250 34R4-5R Type 34R-5R 42R-5L Permanent Split apacitor, Non-synchronous, lass Temperature Rating (TE) PTOR S REQURE / /250 42R4-5L R4-5L Split Phase, Non-synchronous, lass Temperature Rating (TE) Type 42R-5L 1/ R4S-5L Rated 130V Rated Peak ear Radial P Product Type (lb-in.) urrent (mps) (lb-in.) Ratio Load 33-5R 130V s With lass Temperature Rating, rease Lubrication / EPM-5R L 130V s With lass Temperature Rating, Oil Lubrication / EPM-5L L 130V s With lass Temperature Rating, Oil Lubrication / EPM-5L SO: ontact the factory for detailed speed/torque information (Safe Operating rea). See page The fifth character of the product type changes from to for accessory ready models. 3 Type V NTERmotors require a PWM signal from a motion controller or PL to operate. ** NTERmotor can be ordered with either analog (/SR) or digital (/V) interface option. N model numbers require lead time and minimum quantities. Permanent Magnet earmotors Type 33-5R Type 42-5L TLO S-17a.3 13

6 5N Right ngle earmotors up to 121 lb-in. Variable Pacesetter nverter uty earmotors Type 42R-5N Permanent Magnet earmotors Type 42-5N Type 33-5L/ ollow Type 5N only: Needle bearings on driveshaft for high radial load capacity and long life Type 5L/ only: all bearings for high radial load and long life Unvented gearhousing for universal horizontal mounting ronze worm gear for high shock load capability ardened and ground worm for strength and long life See page 34 for capacitors and terminal boxes See pages 39 and for reference dimensions ixed Rating Variable (SO) Ratings 1 230V 230/460V Product Type P (230V) (230/460V) ear z (lb-in.) Ratio Range Range (z) Type No. No. (lb-in.) (lb-in.) (lb-in.) 42R-5N earmotor Three-Phase, nverter uty, Non-synchronous (TE) constant constant constant N / / R6PP-5N Type 42R-5N constant Pacesetter variable variable R-5L/ ollow earmotor Three-Phase, nverter uty, Non-Synchronous (TE) variable N constant N constant R6PP- N2475 3/ constant L/ 2472 Type 42R-5L/ variable N variable N2474 ixed earmotors Rated Radial Load apacitor P V z Ph mps ear Ratio Product Type (lb-in.) (µ/v) Permanent Split apacitor, Non-synchronous PTOR S REQURE / /350 42R5-5N Split Phase (with centrifugal switch), Non-synchronous / R5S-5N Three-phase, Non-synchronous / R5PP-5N Rated Rated urrent Peak Radial ccy No ccy ccy No ccy (mps) ear P Load Product Type Ratio (lb-in.) 12/24V 90/130V (lb-in.) 12/24V 90/130V 42-5N earmotor 12/24V s With lass Temperature Rating 25/ / / /16 / 3/ EPM-5N / / /130V s With lass Temperature Rating 45/ / / / /16 / 1/4 1.4 / EPM-5N / / L/ ollow earmotor 90/130V s With lass Temperature Rating 43 / / N / / N / / / /8 / 1/4 1.4 / EPM-5L/ N / / / / N TLO S-17a.3 odine Electric ompany

7 rushless earmotors Rated Rated urrent (mps) Peak Radial ccy No ccy ccy No ccy ear Load Product Type P Ratio (lb-in.) 24V 130V (lb-in.) 24V 130V 34-5N Right ngle earmotor / EL-5N N / EL-5N N3691 N3591 N3491 N / EL-5N N / EL-5N N / EL-5N N3692 N3592 N3492 N / EL-5N N3587 N / EL-5N N / EL-5N N3693 N N / EL-5N N3588 N / EL-5N / EL-5N N3694 N3594 N3494 N3394 Type 34-5N / EL-5N N3589 N / EL-5N N / EL-5N N3695 N3595 N3495 N / EL-5N N3590 N3390 NTERmotor L earmotors Rated (lb-in.) 24V Rated urrent (mps) Peak (lb-in.) P ear Ratio Radial Load Product Type EL/V-5N N EL/V-5N N / EL/V-5N N EL/V-5N EL/V-5N N3784 Type 34/V-5N NTERmotor up to 121 lb-in. Right ngle earmotors 5 Unvented gearhousing for universal horizontal mounting ronze worm gear for high shock load capability ardened and ground worm for strength and long life s with accessory shafts are ideal for mounting encoders or brakes See page 34 for capacitors and terminal boxes See page 39 for reference dimensions ixed earmotors Rated Radial Load apacitor V z Ph mps ear Ratio Product Type (lb-in.) P (µ/v) Permanent Split apacitor, Non-synchronous PTOR S REQURE 19 / / / / N / / N / / / / 70 1/ / / /250 34R6-5 N / / / / N0514 Type 34R-5 1 / / / 3 19 / 16 5 N0511 Permanent Magnet earmotors Rated Rated urrent Peak Radial ccy No ccy ccy No ccy (mps) ear Load Product Type P Ratio (lb-in.) 24V 130V (lb-in.) 24V 130V N6824 N6124 N N6825 N / EPM N6822 N6122 N N6820 N6121 N65 61 Type 33-5 These models feature sleeve bearings on driveshaft. 1 SO: ontact the factory for detailed speed/torque information (Safe Operating rea). See page The fifth character of the product type changes from to for accessory ready models. 3 Type V NTERmotors require a PWM signal from a motion controller or PL to operate. N model numbers require lead time and minimum quantities. TLO S-17a.3 15

8 3R Right ngle earmotors up to 148 lb-in. Unvented gearhousing for universal horizontal mounting ardened worm gears ace-mount on the drive-shaft side, or bottom-mount is standard 42-5 only: Single and double shaft configurations available See page 34 for capacitors and terminal boxes See page 39 for reference dimensions Variable Pacesetter nverter uty earmotors ixed Rating Variable (SO) Ratings 1 230V Product Type ear Range z (lb-in.) P Ratio Range (z) Type (lb-in.) (lb-in.) (lb-in.) / R2EPP-3R N / R2EPP-3R N8014 Type 30R-3R Pacesetter / onstant R4EPP-3R / R4EPP-3R N / R4EPP-3R N8002 ixed earmotors Rated Radial Load apacitor V z Ph mps ear Ratio Product Type (lb-in.) P (µ/v) Permanent Split apacitor, Non-synchronous PTOR S REQURE / /250 30R2E-3R N / /250 30R2E-3R N8514 Type 30R-3R / /250 30R4E-3R N / /250 30R4E-3R N / /250 30R4E-3R N8502 Permanent Magnet earmotors Rated 24V Rated 130V Rated Radial 24V 130V ear Ratio Product Type (lb-in.) urrent () urrent () P Load / EPM-3R N / EPM-3R N / EPM-3R N / EPM-3R N / EPM-3R N4306 N06 Type 24-3R / EPM-3R N / EPM-3R N4302 N02 rushless earmotors Rated 24V Rated 130V Rated ear 24V 130V Radial Load Product Type (lb-in.) urrent urrent P Ratio / EL-3R N5336 N / EL-3R 5314 N / EL-3R N5306 N5006 Type 22-3R / EL-3R N5303 N / EL-3R N5302 N Right ngle earmotors up to 296 lb-in. Variable Pacesetter nverter uty earmotors ixed Rating Variable (SO) Ratings 1 230/460V (230/460V) ear Range requency Product z (lb-in.) P mps Ratio Range (z) Type (lb-in.) (lb-in.) (b-in.) Three-Phase, nverter uty, Non-synchronous (TE) Type 48R constant N2280 Pacesetter constant R6PP /4 2.7/ constant N variable N2283 Permanent Magnet earmotors Rated Rated urrent Peak Radial ccy No ccy ccy No ccy ear (mps) Load Product Type P Ratio 2 (lb-in.) 24V 130V (lb-in.) 24V 130V Single earmotor N4829 N4729 N N4828 N4728 N / EPM N4827 N4727 N4596 N N4826 N4726 N ouble earmotor * N4833 N4733 N4503 N4103 Type * N4832 N4732 N / EPM * N4831 N4731 N * 4830 N4730 N4500 N4100 *only on one of the two shafts 16 TLO S-17a.3 odine Electric ompany

9 up to 380 lb-in. Right ngle earmotors Unvented gearhousing for universal horizontal mounting ardened helical output gearing ronze worm gear for high shock load capability ardened and ground worm hobbed on the motor shaft for high strength and long life s with accessory shafts are ideal for mounting encoders or brakes See page 34 for capacitors and terminal boxes See pages 39 and for reference dimensions ixed Rating Variable (SO) Ratings 1 ear Range requency Product Type z (lb-in.) P Ratio Range (z) Type (lb-in.) (lb-in.) (lb-in.) Variable Pacesetter nverter uty earmotors 230V Three-Phase, nverter uty, Non-synchronous (TE) N / constant R6PP N2238 ollow Type 42R- and 42R-/ / constant R6PP-/ N2337 ollow (Pacesetter) N2338 ixed earmotors Rated Radial Load apacitor P V z Ph mps ear Ratio Product Type (lb-in.) (µ/v) Permanent Split apacitor, Non-synchronous PTOR S REQURE N / /370 42R N Three-phase, Non-synchronous N N /4 230/ / R5PP- N N N5270 Permanent Split apacitor, Non-synchronous ollow PTOR S REQURE Type 42R- and 42R-/ N8266 ollow / /370 42R5-/ N N8262 Permanent Magnet earmotors No No Rated Rated urrent Peak Radial ccy ccy (mps) ear ccy ccy Load Product Type P Ratio 2 (lb-in.) (lb-in.) 24V 90/130V 24V 90/130V 33-90/130V s With lass Temperature Rating 6.2 / / / / / 1.8 1/8 / 1/4 1.4 / EPM- 14 / / / / /130V ollow 6.2 / / / / / 1.8 1/8 / 1/4 1.4 / EPM-/ 14 / / / / V s With lass Temperature Rating 24V 130V Only N4866 N4766 N N4864 N4764 N / EPM N4862 N4762 N N4860 N4760 N Type 33- Type 33-/ ollow 1 SO: ontact the factory for detailed speed/torque information (Safe Operating rea). See page The fifth character of the product type changes from to for accessory ready models. N model numbers require lead time and minimum quantities. Type 42- Save Time, Space and Money with ollow earmotors ollow shaft gearmotors connect directly to the driven load, reducing the overall space required by the gearmotor and eliminating expensive shaft couplings, mounting hardware, chains and sprockets. ollow shaft flange mounting can also eliminate the need for a support bearing one side of a conveyor roller. TLO S-17a.3 17

10 s without earing odine offers a full range of fractional horsepower motors. fixed and variable speed motors are available with voltage ratings of 115 V, 60 z (single-phase), 230 V, 60 z (3-phase) and 230/460 V, 60 z (3-phase). They are offered with three winding types: permanent split capacitor, split phase, and three-phase. PM motors are available with voltage ratings from 12 to 180 V. rushless motors are available with voltage ratings of 24 or 130 V. s from 3.5 to 68 oz.in. Will operate satisfactorily on 50 or 60 z Totally enclosed nonventilated P-20 rating Provides excellent performance for holding, winding and tensioning applications Provides locked rotor or reverse torque intermittently at rated voltage, or continuously at reduced voltage Permanently lubricated, noise tested ball bearings Locked bearing design on 30R, 42R, and 48R minimizes shaft endplay See page 34 for capacitors and accessories See pages 41 and 42 for reference dimensions s (for holding applications) V z Locked Rotor Performance % uty ycle (oz-in.) Watts Max. On Time (min.) No Load K Type K R Type 30R R Type 42R R NEM-56 ace Mount, Or Mount Type 48R Typical Performance urves at 115V, 60 z Rpm #1: K-26 #2: 30R #3: 42R #4: 48R apacitor (µ/v) Product Type PTOR S NLUE 2.3/250 K PTOR S REQURE 5.0/250 30R2E 5625 PTOR S REQURE 7.5/370 42R6E 2628 PTOR S REQURE 12.5/370 48R6E #1 #2 #3 # Oz-in. 18 TLO S-17a.3 odine Electric ompany

11 Variable Pacesetter nverter uty s 1/25 to 3/4 P Quintsulation, 5-stage insulation system designed to meet NEM M , Section V, Part 31 Most standard models are available with either 230V, 60z, 3-phase or 230/460V, 60z 3-phase Variable (SO) Ratings ixed Ratings 1 Product Range requency 10 z 60 z 1 z Type P mps Range (z) Type (oz-in.) (oz-in.) (oz-in.) (oz-in.) 24 1/ R2EPP N variable 35 1/ R4EPP 2201 ixed Ratings nverter-grade magnet wire and lass insulation system for increased protection against spikes and corona damage caused by the inverter UL recognized for construction, S certified, and in Range Variable (SO) Ratings 1 Range 10 z 60 z Type (z) (oz-in.) (oz-in.) compliance with the Low Voltage irective E See page 34 for capacitors and terminal boxes See pages 41 and 42 for reference dimensions Product Type Type 30R Pacesetter Variable Type 34R 1/8-1/4 P 230V 230/460V P (230V) (230/460V) Max. z (oz-in.) mps mps (oz-in.) Three-Phase, nverter uty, Non-synchronous (TE) / / variable R6PP Three-Phase, nverter uty, Synchronous (TE) / variable R6YP 2299 ixed Ratings Range Variable (SO) Ratings 1 Range 10 z 60 z Type (z) (oz-in.) (oz-in.) Product Type Variable Type 30R 1/25-1/17 P 230V Type 34R Pacesetter Variable Type 42R 3/8 P 230/460V P (230V) (230/460V) 1 z (oz-in.) mps mps (oz-in.) Three-Phase, nverter uty, Non-synchronous (TE), Mount / / variable R6PP Three-Phase, nverter uty, Non-synchronous (TE), NEM ace Mount / / variable R6PP N Variable (SO) Ratings ixed Ratings 1 Product Range requency (230/460V) 10 z 60 z Max. z Type (oz-in.) P Range (z) Type mps (oz-in.) (oz-in.) (oz-in.) Three-Phase, nverter uty, Non-synchronous (TE), NEM-56 ace Mount or Mount /4 2.7/ variable R6PP 22 Three-Phase, nverter uty, Synchronous (TE), NEM-56 ace Mount or Mount /3 2.4/ variable R5YP SO: ontact the factory for detailed speed/torque information (Safe Operating rea). See page 19. N model numbers require lead time and minimum quantities. Type 42R Pacesetter Variable Type 48R 1/3-3/4 P Type 48R Pacesetter Safe Operating and rea (SO) Rated is either the value of torque which corresponds to nameplate output power and speed at 60 z, or it is the maximum torque at gear strength limits (rated torque can be either motor limited or gear-limited). SO is defined as the maximum torque at which the motor still operates within lass thermal limits, or as the maximum torque of a gearmotor when it is gear-limited. ontinuous duty operation must be limited to the area below the SO or gear-limited torque curves. The SO torque for synchronous motors is close to the pull-in torque; that is, the motor will pull out of synchronism if the required torque exceeds the SO torque. Examples of typical SO raphs. ontact our technical support staff for specific SO information. (OZ-N) Power (Watts) R6PP SO T MOEL 2295 (TE) Rated 148 oz-in requency (z) Rated : 148 oz-in. SO Output Power SO SPEE (L-N) R6PP-2 ERMOTOR 10:1 ear Ratio, requency (z) SO Rated 115 L-N SO TLO S-17a.3 19

12 ccessories see for accessory dimensions L rackets E No. escription 0969 Kit for E, and X gearmotors (will not fit 48R- or 48R-X) 0970 Kit for WX gearmotors 0979 Kit for 34R and 34 motors 0980 Kit for 34R-Z gearmotors E 0990 Kit for 24 motors 5968 Kit for 30R and 33 motors; 30R-, 24-, 22-, 24-Z, 33-Z and 22-Z gearmotors and earmotor Kits, E, apacitors No. escription 0967 plate kit for 3 gearmotors 0977 P-44 protection kit for 33 gearmotors and motors 0978 P-44 protection kit for 42 gearmotors and motors 0984 ie cast terminal box kit for 34R, 42R, 48R, and 33, 42 motors and gearmotors (: does not fit on 12 or 24V models) E 0985 Oversized die cast t-box kit. its capacitor for use with 42R-X gearmotors. lso fits 42R, 48R, 33 and 42 motors/gearmotors ie cast terminal box with terminal block for 30R motors and gearmotors 1984 ie cast terminal box kit with terminal block for 34R, 42R, 48R, 33 and 42 motors/gmtrs. 90/130, 130V and 180V models only ie cast terminal box for 30R motors and gearmotors 0992 daptor plate for mounting brakes or encoders for 33/42 gearmotors/motors with accy. ready shaft extensions 0993 daptor plate for mounting brakes or encoders for 22/34 gearmotors/motors with accy. ready shaft extensions hole adaptor plate for E,, WX and X gearmotors. Provides drop-in replacement for competitive gearmotors kit for 34R motors and gearmotors ox-type apacitor Metal an-type apacitor, Select the appropriate run capacitor based on the capacitor specifications found on pages 4-21 (29-33 for metric models) and in the tables below. The gearmotor or motor nameplate states the required capacitance of the run capacitor, but it is also critical to specify a capacitor that has the voltage ratings as shown in these tables. When using a run capacitor that is not supplied by odine Electric, please make sure the voltage rating is equal to or higher than the voltage rating specified on this page. ifferent motor sizes might require a different minimum voltage rating for the run capacitor. apacitors Part No. µ /V ox-type Metalized ilm apacitor (Plastic ase) / / / / / / / / /250 Part No. µ /V / / , 3 7.5/ / / / / / / / /250 Part No. µ /V / / / / /350 Round Metal an-type apacitor / / / /450 1 apacitor fits inside terminal box kit model apacitor fits inside oversized terminal box model number New capacitor part number effective 06/2016. apacitor lamps No. escription clamp for round, metal can type capacitor model clamp for round, metal can type capacitors: models , , and or mounting details and dimensions, visit 34 TLO S-17a.3 odine Electric ompany

13 rake Kit for s and earmotor No. Static (lb-in.) Volt Ohms Wt. (oz.) This item is intended only for 33 and 42 PM motors and gearmotors. ontrol ccessories L PM tem No. escription 0888 nalog nterface oard for use with model 0810, 0830, and 0850 controls. llows control to accept a variable voltage or current signal from user s host controller to automatically control motor speed. nputs are optically isolated Electronic irection and raking oard, --R Kit, for use with model 0810, 0830, and 0850 controls. llows user to change motor direction and to dynamically brake motor to a quick stop. nputs are not optically isolated. This kit includes one --R board, one cable and connector, mounting hardware, and two additional braking resistors Local/Remote Switch for use with model 0810, 0830, and 0850 controls when used with accessory model llows user to switch between automatic and manual operation Switch Sealing Kit upgrades NEM-12 brushless and PM enclosed controls to P-44 rating able Kit for stock 34/V NTERmotors. : six feet (3 cables: power, logic and encoder) Extension able for model 3910, 3911, 3921 and 3912 controls. Extends the cable between the motor and control by six feet. oth ends are equipped with circular connections for easy connection between model 3983 cable assembly or encased control and the motor. : six feet onnection able ssembly for connecting model 3910, 3921 and 3911 chassis controls to stock 130 V motors. One end of the cable is equipped with a circular connector, the other end is equipped with quick disconnects for phase leads, and a molded connector for the commutation leads. : 6 feet nalog nterface nd solation Module for model 3910, 3911,3921 and 3912 controls. Provides nalog interface and isolates controls from system controller input signals which may be at different potentials Potentiometer Kit for use with PM controls. ontains 10k Ohm potentiometer, hardware, wire and connector for manually regulating motor speed use and Potentiometer Kit for use with model 3910 control. ontains potentiometer for manually regulating motor speed and various fuses to cover the range of motors and gearmotors which can be used with the control. Metric ccessories Metric L rackets tem No. escription 0990 Metric Kit for Metric Kit for 33 motors, and type and Z gearmotors 1970 Metric Kit for type W gearmotors 1969 Metric Kit for E, and X gearmotors (will not fit 48R- or 48R-X) no L bracket kits are available for 34R and 34R-Z gearmotors Metric and earmotor Kits tem No. escription 1982 Metric die cast terminal box kit for 30R motors and gearmotors 1984 Metric die cast terminal kit with terminal block for 33, 34R, 42 and 42R motors and gearmotors. or 90/130, 130V and 180V models only Metric die cast base kit for 42 motors and gearmotors 0992 Metric adaptor plate for 33 and 42 motors and gearmotors TLO S-17a.3 35

14 Right ngle earmotor imensions imensions (in inches) are for reference only. or drawings and up-to-date specifications, please visit ccessory (on Select s) L X /L Lead Exit iameter E iameter to Lead Exit to K enter of To Edge 1 1 Type 3N/3, pages (Mounts from ) Weight X iameter to E iameter to 1 1 K L cc y ord/ Lead (in.) 30R4-3N No 12 34R No 12 [4]1/ Yes lat UN-2 x 224-3N No 12 or deep 224-3N No None NTER X /L Lead Exit iameter 24 Lead Exit Lead Exit K enter to E iameter to 1 1 to Type 3, 5R/5L, pages (Mounts from ) Weight X iameter to E iameter to enter To 1 1 K Type 3 earmotor lat [4] ø Type 5R earmotor 34R4-5R Key/ [4] ø R lat 24 Type 5L earmotor 42R4-5L Key/ [4] ø L lat 24 ord/ Lead (in.) 38 TLO S-17a.3 odine Electric ompany

15 ccessory (on Select s) K Lead Exit /L LeadExit ccessory (on Select s) L /L Lead Exit Lead Exit X iameter iameter K X Type 3R,, pages to enter of to ace E iameter earmotor Type 5N, 5, 5, pages (Mounts from with eet) Product Type Type 5N earmotor Wt. X iameter to E iameter E iameter 3R: 4 s (red) : 1.5 ; eight 2.31 : 3 s (blue) to to 42R-5N 42R5-5N No 12 42R6-5N [4]ø 42-5N 425-5N Yes Key/lat / N No s 34-5N 344-5N Yes 12 or N No Type 5 earmotor 34R-5 34R [4] No Key/lat ø.271/.266 No s Yes 24 Type 5 earmotor 48R-5 48R [4]ø.41/.44 No Key s Yes 24 Only the first four characters of the product type are relevant to dimensions Product Type Wt. X iameter to E iameter to to enter to ace K Type 3R earmotor 30R-3R 30R R [4] R UN-2 x [4]1/4-20 UN lat eep.31 deep No R Min or 24 Type earmotor 42R- 42R [4]1/4-20 UN R [3 ]5/16. eep Min. No [4]1/4-20 UN Yes 12 UN-2 x. eep Min Key eep [4] M6 X No 24 Max. on.45 eep Max [4]1/4-20 UN-2.45 eep Min. Yes 24 Only the first four characters of the product type are relevant to dimensions K cc y L cc y ord/ Lead (in.) ord/ Lead (in. TLO S-17a.3 39

16 ollow earmotor imensions imensions (in inches) are for reference only. or drawings and up-to-date specifications, please visit ccessory K (on Select s) /L Lead Exit X iameter ace ore Size to enter of E ore to enter of ore to Type 3/, pages (Mounts from ) Wt. X X iameter to ore Size E ore to ore to Mtg ace Mount K cc y ord/lead (in.) 244-3/ [3] Yes / [4] 1/4-20 UN-2 UN-2 x Min. No 12 or / eep Max. eep on NTER No None Lead Exit iameter Lead Exit ace Mount ore Size to ace E iameter Type 5L/, page 14 (ace Mount) Product Weight X E Type iameter ore ace ace Lead/ord to Size iameter Mount (in.) 33-5L/ [4] 1/4-20 UN-2 x.44 Min R-5L/ 42R eep on None ccessory (on Select s) /L Lead Exit iameter ore Size Lead Exit enter of E ore to iameter X ace 1 Type /, page 17 (ace Mount) Product Type Wt. X iameter to ore Size E ore to 42R R-/ [3] 5/16-18 [4] 1/ No 12 42R UN-2 x.44 UN / Max. eep on x. Min. No / eep Yes 24 Only the first four characters of the product type are relevant to dimensions 1 ace cc y Lead/ord (in.) TLO S-17a.3 odine Electric ompany

17 Standard products for demanding applications earmotors odine offers a complete line of right angle, parallel shaft, and hollow shaft gearmotors with torque ratings from 6-1,000 lb-in. ( Nm). ll gearmotors are available as fixed-speed, variable-speed, permanent magnet, and brushless models. pages 4-17 (metric 29-33) NTERmotors odine s unique NTERmotor combines a motion control, a brushless motor and a gearhead in one compact package. They provide simplified wiring, reduced panel space, faster assembly times and lower system costs. ontrols Our motion controls are precisely engineered to provide maximum performance from our motors and gearmotors. page odine designs and manufactures a complete line of permanent magnet controls for 90/130V PM motors, and brushless controls for 24V and 130V motors. We also offer 3-phase inverter controls. etorq odine s high performance, high torque direct drive system is ideal for applications that demand high efficiency, very compact design and enclosed construction. page 23 Presented by: bodine-electric.com 201 Northfield Road Northfield, L U.S.. Tel: ax: Toll ree: info@bodine-electric.com SO 9001:2008 MNEMENT MNEMENT QULTY ERTE SYSTEM RoS OMPLNT opyright 2016 odine Electric ompany. ll rights reserved.

For 2D/3D CAD drawings and distributor locations, go to

For 2D/3D CAD drawings and distributor locations, go to TYP TYP For 2/3 C drawings and distributor locations, go to www.bodine-electric.com Our website features the latest product specifications, technical documents, connection diagrams and instruction manuals.

More information

Standard Products Catalog

Standard Products Catalog Standard Products atalog Induction Permanent Magnet D rushless D Parallel Gearmotors Motors ontrols Upgraded 3-Phase Models! pages 8 bodine-electric.com S-17a D 4 3 4 14.0/11.0 2.378 SQ MX 3 5.522 MX.554

More information

for high strength and long life shafts are ideal for mounting encoders or brakes

for high strength and long life shafts are ideal for mounting encoders or brakes Right Angle motors 3N/3F Right Angle motors up to 37 lb-in. Variable Inverter Duty AC motors Fixed Rating Variable (SOA) Ratings 1 230V Motor A Range Frequency Range (Hz) Type Three-Phase, Inverter Duty,

More information

Motion Solutions AC Induction Permanent Magnet DC Brushless DC

Motion Solutions AC Induction Permanent Magnet DC Brushless DC Motion Solutions AC Induction Permanent Magnet DC Brushless DC Gearmotors Motors Controls bodine-electric.com Your Partner for Engineered Solutions and Optimized Delivery Programs 3D Modeling and Prototyping

More information

MADE IN U.S.A. Inverter Grade Magnet Wire. Fan Cooled for High Output Power. Selectively hardened all steel gears

MADE IN U.S.A. Inverter Grade Magnet Wire. Fan Cooled for High Output Power. Selectively hardened all steel gears Variable speed, inverter duty, threephase motors and gearmotors with matched AC controls Permanent split capacitor motors are reliable, easy to install and ideal for fixed speed applications The best solution

More information

MADE IN U.S.A. Inverter Grade Magnet Wire. Fan Cooled for High Output Power. Selectively hardened all steel gears

MADE IN U.S.A. Inverter Grade Magnet Wire. Fan Cooled for High Output Power. Selectively hardened all steel gears Bodine Electric s extensive line of stock 3-phase, inverter duty, induction motors and gearmotors was designed with your application needs in mind. Bodine offers the widest selection of inverter duty,

More information

CUSTOM DC MOTORS & GEARMOTORS

CUSTOM DC MOTORS & GEARMOTORS & GEARMOTORS Battery-powered, 24-volt motor with close coupled hydraulic pump mounting on one end and standard NEMA 56 C face and shaft on other end. Totally enclosed fan cooled, thyristor rated, partial

More information

International Motors/Gearmotors/Controls

International Motors/Gearmotors/Controls International Motors/Gearmotors/Controls AC INTENATIONAL PODUCTS INTODUCTION The metric products listed in this section have been designed with international design standards in mind. The 230 volt, 50

More information

CUSTOM DC MOTORS & GEARMOTORS

CUSTOM DC MOTORS & GEARMOTORS & GEARMOTORS Battery-powered, 24-volt motor with close coupled hydraulic pump mounting on one end and standard NEMA 56 C face and shaft on other end. Totally enclosed fan cooled, SCR rated, partial motor

More information

Brushless DC Products

Brushless DC Products BUSHLESS 4 COLO SEPAATO SECTION Ideal for continuous duty applications Better performance than permanent magnet DC systems. No brushes to replace. Low-voltage 24V models available. Over 50 Integramotor

More information

Unimotor. Control Techniques Dynamics. Brushless.. AC Servo. Motors...

Unimotor. Control Techniques Dynamics. Brushless.. AC Servo. Motors... Unimotor rochure ontrol Techniques ynamics rushless Servo Motors UNIMOTOR haracteristics Introducing Unimotor Unimotor is a range of brushless servo motors from T ynamics They are three phase, 6 or 8 pole,

More information

Filtered PWM Speed Control for Permanent Magnet DC Motors

Filtered PWM Speed Control for Permanent Magnet DC Motors Instructions for Installation and Operation Filtered PWM Speed Control for Permanent Magnet DC Motors Model 0794 Speed and Direction Control up to 5/8 HP NEMA-1/IP-20 Specifications Product Type:... WPM-2148E1

More information

SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS

SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS 12-100 In-Lbs Single phase gearmotors, totally enclosed for continuous duty, general purpose applications. Permanent TEFC split capacitor designs are rated

More information

MINA-GEAR GEARMOTORS P-1. Mina-Gear Features... P-2 Application & Selection... P-3 Right-Angle Worm Gearmotors Series Parallel Shaft Gearmotors

MINA-GEAR GEARMOTORS P-1. Mina-Gear Features... P-2 Application & Selection... P-3 Right-Angle Worm Gearmotors Series Parallel Shaft Gearmotors MINA-GEAR GEARMOTORS Mina-Gear..................................................... -2 Application & Selection................................................... -3 Right-Angle Worm Gearmotors 2100 Series

More information

Catalog S-16 BODINE. E l e c t r i c C o m p a n y. Small Motors Gearmotors Controls BODINE

Catalog S-16 BODINE. E l e c t r i c C o m p a n y. Small Motors Gearmotors Controls BODINE Catalog S-16 E l e c t r i c C o m p a n y Small Motors Gearmotors Controls 1-800-7 www.bodine-electric.com Table of Contents What s New...i General Information...ii President Message...iii Zero Lead Time...iv

More information

1000 Series Brush, Rotary DC Servomotors

1000 Series Brush, Rotary DC Servomotors 1000 Series rush, Rotary Servomotors ynamically balanced, skewed rotor for exceptionally smooth velocity Standard NEM 23, 34, and 42 frame sizes Standard stainlesssteel shaft resists corrosion ouble shielded

More information

Section Contents. Product Reference Guide Numbering System / How To Order & 16. Selection Procedure... 17

Section Contents. Product Reference Guide Numbering System / How To Order & 16. Selection Procedure... 17 Section ontents roduct Reference uide... - umbering System / ow To Order... 4 & 6 Selection rocedure.... 7 ssemblies and ounting ositions... 8-9 Recommended Lubricants... 0 R Selection Tables..................................................

More information

HELICAL BEVEL DRIVES K-1

HELICAL BEVEL DRIVES K-1 ELIAL EVEL RIVES K elical evel Product eatures...k2 to K3 Selection Procedure... K4 to K5 escriptions... K6 Mounting Positions... K7 Model Selection Index... K8 Selection y Input P... K9 to K21 Integral

More information

S-SERIES Translating Screw Jack 50kN

S-SERIES Translating Screw Jack 50kN Translating Screw Jack 50kN Performance ST050 Screw Jack Model 4 S-050 apacity kn 50 ead Screw 1 iameter (mm) 40 ead (mm) 9 18 Option 1 6:1 ear Ratios Option 2 24:1 Option 3 8:1 (OR) 4 x Turns of worm

More information

IB Series Servomotors

IB Series Servomotors Series Servomotors Modeling values Updated : 12/20/05 Rotor Inertia Brushless Servomotors Low Inertia High orque Servo ynamics provides applications with low inertia to attain the highest acceleration

More information

BLV Series. Brushless Motor and Driver Package DC Power Supply Input, High Power. Features. Standard Type/Electromagnetic Brake Type

BLV Series. Brushless Motor and Driver Package DC Power Supply Input, High Power. Features. Standard Type/Electromagnetic Brake Type rushless Motor and river Package Power Supply Input, High Power LV Series Standard Type/Electromagnetic rake Type Introducing the new high power, input LV Series brushless motor and driver with output

More information

QUICK REFERENCE Stock Sub-FHP Gearmotors

QUICK REFERENCE Stock Sub-FHP Gearmotors Parallel Shaft PZ Series QUICK REFERENCE Stock Sub-FHP P240 & P300 Series AC Single & Three Phase Single Phase 115V 12-100 In-Lbs Page 102 Single Phase 115/230V 43-391 In-Lbs Page 103 DC SCR & Low Voltage

More information

Accessory Overview UHW

Accessory Overview UHW ccessory Overview rom a single actuator to a multi-actuator system, a comprehensive range of accessories is available to tailor your UN-LT system to meet your project requirements. omponents and Wheels

More information

P Series. UL Recognized CSA Certified VDE Approved. P Series. CORCOM Product Guide

P Series. UL Recognized CSA Certified VDE Approved. P Series. CORCOM Product Guide OROM Product Guide The HMELEON daptable Module for General, High Performance or Medical pplications UL Recognized S ertified VE pproved PS PS000SS30 PS The P series power entry module offers fuller flexibility

More information

C-SERIES Rotating Screw Jack 100kN

C-SERIES Rotating Screw Jack 100kN -SRIS Rotating Screw Jack 100kN MR100 olumn Strength ree Pinned uided ixed Pinned ixed PRMISSI OMPRSSIV O (K) 1.2.10 4 1.1.10 4 1.10 4 9000 8000 7000 6000 5000 4000 3000 2000 1000 OUMN NTH (mm) 0 IX/UI

More information

503 Series Solenoid Pilot Actuated Valves

503 Series Solenoid Pilot Actuated Valves Solenoid Pilot ctuated Valves Offered by: Specialists in Valves, ontrols, Pneumatics, Fluid Measurement Phone: (203) 261-6711 www.okcautomation.com 5 Ported, 2 and 3 position, 4-way, Spool & Sleeve and

More information

QUICK REFERENCE Stock Sub-FHP Gearmotors

QUICK REFERENCE Stock Sub-FHP Gearmotors QUICK REFERENCE Stock Sub-FHP Right-Angle Worm Type 10 & 13 Series AC Single & Three Phase Single Phase 115/230V 14-113 In-Lbs Page 155 DC SCR & Low Voltage DC SCR 90 & 180V 5-135 In-Lbs Low Voltage (12V)

More information

HELICAL BEVEL DRIVES K-1

HELICAL BEVEL DRIVES K-1 K ELIAL EVEL RIVES elical evel Product eatures......................................k1 to K3 Selection Procedure............................................ K4 to K5 escriptions.....................................................

More information

Setup, Operation & Maintenance Manual

Setup, Operation & Maintenance Manual Setup, Operation & Maintenance Manual ndustrial and Sanitary Variable Speed V ontrollers Table of ontents Warnings eneral Safety.................... 2 ntroduction................................ 2 Specifications...............................

More information

More Than Just a Motor Company

More Than Just a Motor Company More Than Just a Motor Company RIGHT-ANGLE AND PARALLEL SHAFT AC & DC GEARMOTORS FRACTIONAL AND SUB-FRACTIONAL HORSEPOWER Bulletin 1830 GEARMOTORS Your First Source for Off-The-Shelf or Custom Gearmotors

More information

POWERTEC Brushless DC Motors

POWERTEC Brushless DC Motors INEX How to use this section This section covers our extensive line of high performance POWERTE and PTORQ Brushless Motors. Select the proper motor using one of the following procedures. If you are already

More information

AC Single & Three-Phase Direct Drive Fans

AC Single & Three-Phase Direct Drive Fans Single & Three-Phase irect rive ans 96 899 99s or over a century... istory Originally formed over years ago as part of the US based Torin orporation, and then established as a U subsidiary in 96; Torin-Sifan

More information

NEMA Contactors & Starters A200

NEMA Contactors & Starters A200 March 007 NM ontactors & Starters 00 ontactors Non-reversing and Reversing -7 ontents escription Page ontactors Non-reversing and Reversing............ -7 Product escription Sizes 00 4............ -7 Product

More information

SUB-FHP DC GEARMOTORS PARALLEL SHAFT GEARMOTORS

SUB-FHP DC GEARMOTORS PARALLEL SHAFT GEARMOTORS 10-100 In-Lbs Torque 36-100 In-Lbs Torque Electrical Specifications: SCR Rated Totally enclosed, permanent magnet DC gearmotors, performance matched for continuous duty service over a 60:1 speed range.

More information

MF-R Series - PTC Resettable Fuses

MF-R Series - PTC Resettable Fuses TV Rheinland *RoHS OMPLINT R 0 080T Features Radial Leaded evices ured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements RoHS compliant* gency recognition: pplications lmost

More information

Direct-Drive Brushless Servo Systems

Direct-Drive Brushless Servo Systems Catalog 8-4/US Direct-Drive rushless Servo Systems The Dynaserv is a high-performance, direct-drive servo system with optical encoder feedback. Each DM Model consists of a brushless direct drive motor,

More information

SRB Series. UL Recognized CSA Certified VDE Approved* Specifications. SRB Series. Power Inlet Filters & Power Entry Modules

SRB Series. UL Recognized CSA Certified VDE Approved* Specifications. SRB Series. Power Inlet Filters & Power Entry Modules orcom Product Guide atalog: 161 Issue ate: 6.11 Minimum epth, ost-effective Shielded Power Inlet Filter SR Series UL Recognized S ertified V pproved* SRP SRS8 SR1 SR2 SR Series Smallest depth orcom RFI

More information

SERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS

SERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS SERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS SERIES 12 SUB-FHP Electrical Specifications: Both SCR (90 volt) and Low Voltage (12 volt) right angle gearmotors. the 90 volt motors are performance matched

More information

Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.

Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in. Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.

More information

Solenoid Pilot Actuated Valves

Solenoid Pilot Actuated Valves Solenoid Pilot ctuated Valves 02 Series irectional ontrol Valve www.asco.com Table of ontents 02 Series Features and enefits Performance ata How to Order Sandwich Option Kit 9 Speed ontrol Kit 9 Shut

More information

QUICK REFERENCE Stock Sub-FHP Gearmotors

QUICK REFERENCE Stock Sub-FHP Gearmotors QUICK REFERENCE Stock Sub-FHP AC Single & Three Phase DC SCR & Low Voltage Parallel Shaft PZ Series Single Phase 115V 12-100 In-Lbs Page 166 DC SCR 90 & 180V 10-100 In-Lbs 36-100 In-Lbs torque Page 156

More information

1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories

1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories 1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody

More information

28.1. NEMA Contactors and Starters. Contents. Contactors Non-Reversing and Reversing. Freedom Series. Product Description

28.1. NEMA Contactors and Starters. Contents. Contactors Non-Reversing and Reversing. Freedom Series. Product Description .1 NM ontactors and Starters Non- and ontactors ontactors Non- and Product escription Non- ontactors are most commonly used to switch motor loads in applications where running overcurrent protection is

More information

June 2005 CN35 Electrically Held Vol. 2, Ref. No. [0494]

June 2005 CN35 Electrically Held Vol. 2, Ref. No. [0494] 7-2 Lighting ontactors Open ontrol June 2005 N5 lectrically Held Vol. 2, Ref. No. [09] ontents eatures Instructional Leaflets 7 escription Page lectrically Held Product escription....... 7-2 pplication

More information

Panasonic G-series. Small ac geared motors & brake motors. ideas in motion

Panasonic G-series. Small ac geared motors & brake motors. ideas in motion Small ac geared motors & brake motors ideas in motion geared motors 6W to 90W 2 Panasonic, one of the largest motor manufacturers in the world, have designed and developed the G-series range of geared

More information

Bulletin 1494F 30A, 60A, 100A Fixed-Depth Disconnect Switch (Cat 1494F-N30; 1494F-N60; 1494F-N100; Series C)

Bulletin 1494F 30A, 60A, 100A Fixed-Depth Disconnect Switch (Cat 1494F-N30; 1494F-N60; 1494F-N100; Series C) Installation Instructions ulletin 1494F, 60, Fixed-epth isconnect Switch (at 1494F-N30; 1494F-N60; 1494F-N100; Series ) WRNING: To prevent electrical shock, disconnect from power source before installing

More information

C-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS

C-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence: about

More information

TOKEN ELECTRONICS IND. CO., LTD.

TOKEN ELECTRONICS IND. CO., LTD. TON LTRONS N. O., LT. ONSTY PRTON SRN atalogue of Power Resistors No. 137, Sec. 1, hung Shin Rd., Wu u siang,taipei sien,taiwan, R.O. TL: 886-2-2981 0109 X: 886-2-2988 7487 ontact: token@token.com.tw Support:

More information

MF-R Series - PTC Resettable Fuses

MF-R Series - PTC Resettable Fuses *RoHS OMPLINT & **HLOGN FR R0 780T Features n Radial Leaded evices n ured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements n RoHS compliant* and alogen free** n gency recognition:

More information

RV SYSDrive AC Inverters

RV SYSDrive AC Inverters 7160_Omron 3/31/04 4:38 PM Page 1 OMRON IM ONTROLS, IN. RV SYSrive Inverters High-Value, 4-in-1 Inverter Solutions for General-Purpose & High-End pplications 7160_Omron 3/31/04 4:38 PM Page RV Inverter

More information

Hyponic. Hypoid Right Angle Gearmotor and Reducer CATALOG

Hyponic. Hypoid Right Angle Gearmotor and Reducer CATALOG Hypoid Right ngle Gearmotor and Reducer CTLOG 12.001.50.006 Hypoid Right ngle Patented, High-Performance Gearmotors and Reducers Featuring ll-steel Hypoid Gearing U. S. PT. NO. 5,203,231; U.S. PT. NO.

More information

E920 Series Bearings. Locking Collars. Tapered Roller Bearing. Locking Collars. Rubber Contact Seal. Outer Race. One-Piece Cast Iron Housing

E920 Series Bearings. Locking Collars. Tapered Roller Bearing. Locking Collars. Rubber Contact Seal. Outer Race. One-Piece Cast Iron Housing rowning E920 Series Tapered Roller earing rowning 920 series mounted tapered roller bearings feature one-piece durable cast iron non-expansion housings with Type E mounting dimensions and limited misalignment.

More information

NEMA 1, NEMA 4X and Chassis Mount Adjustable Speed Controls for DC Motors

NEMA 1, NEMA 4X and Chassis Mount Adjustable Speed Controls for DC Motors Made in the U.S.A. NEMA 1, NEMA 4X and Chassis Mount Adjustable Speed Controls for DC Motors Nema Enclosed DC Control Specifications Catalog Number BC140 or Features BC138 BC139 BC140-FBR BC154 BC160 BCWD140

More information

Filtered SCR Brushless DC Motor Speed Controls (NEMA-12)

Filtered SCR Brushless DC Motor Speed Controls (NEMA-12) Instructions for Installation and Operation Filtered SCR Brushless DC Motor Speed Controls (NEMA-12) Model 3912, 0-2,500 rpm Model 3913, 0-10,000 rpm SPECIFICATIONS Product Type...ABL-3912E/ABL-3913E Input

More information

Presentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508

Presentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508 Presentation, pplication Severe uty Limit Switches 0 onforming to NEM 600 and UL508 escription 9007T Mill Switches Use the 9007T Mill switches instead of other limit switches in the following applications:

More information

Product Overview. Hansen Precision Electric Motors DC AC DC. Actuators. Stepper

Product Overview. Hansen Precision Electric Motors DC AC DC. Actuators. Stepper AC Hansen Precision Electric Motors Hansen s quality products are known around the world. These include: Synchron Motors, available with custom voltage, speed and power, durable brush motors, AC clock

More information

Type ABL-3906C Low-Voltage Brushless DC Motor Controls (IP-00)

Type ABL-3906C Low-Voltage Brushless DC Motor Controls (IP-00) Instructions for Installation and Operation Type ABL-3906C Low-Voltage Brushless DC Motor Controls (IP-00) Model 3908 12 VDC (60 commutation) Model 3909 24 VDC (60 commutation) Model 3919 24 VDC (120 commutation)

More information

R-Rated medium voltage fuses for motor circuit protection

R-Rated medium voltage fuses for motor circuit protection Technical ata 6001 Supersedes September 2017 Features and benefits escription: Indoor/enclosure, R-Rated medium voltage, current-limiting fuses for motor circuit protection. urrent-limiting R-Rated fuses

More information

C B Motors CB I W U. Clutch and Brake Motors. Features. Product Number Code. Construction A ORIENTAL MOTOR GENERAL CATALOG

C B Motors CB I W U. Clutch and Brake Motors. Features. Product Number Code. Construction A ORIENTAL MOTOR GENERAL CATALOG lutch and Brake s B s This compact precision motor is equipped with an internal clutch and brake for use with a gearhead. The combination makes it the ideal motor for uses involving frequent START/STOP

More information

Single Phase 110 Single Phase 115 Single Phase 220 Single Phase 230 Single Phase 230 Three Phase 200 Three Phase 200 Three Phase 220 Three Phase 230

Single Phase 110 Single Phase 115 Single Phase 220 Single Phase 230 Single Phase 230 Three Phase 200 Three Phase 200 Three Phase 220 Three Phase 230 INDUTION MOTORS Single-Phase, Three-Phase 9 (1/8 HP) Frame Size 3.54 in.sq.(9mm sq.) GER SFETY STD. Specifications ontinuous Rating Upper Name:Pinion Shaft Type Lower Name( ):Round Shaft Type Output Power

More information

SMP-2 Overload Relay. Product Selection Overview Feature SMP-1 SMP-2 SMP-3 TABLE OF CONTENTS. Description Page Description Page

SMP-2 Overload Relay. Product Selection Overview Feature SMP-1 SMP-2 SMP-3 TABLE OF CONTENTS. Description Page Description Page 3 ulletin 93 ulletin 93 SMP- Overload Relay SMP-3 Overload Relay SMP-2 Overload Relay Product Selection Overview Feature SMP- SMP-2 SMP-3 Self-Powered 3.2: djustment Range Phase Loss Protection Selectable

More information

QO and QOU Miniature Circuit Breakers QOU Miniature Circuit Breakers

QO and QOU Miniature Circuit Breakers QOU Miniature Circuit Breakers QO and Miniature ircuit reakers Miniature ircuit reakers lass 720 / Refer to atalog 0730T9801 Low mpere Miniature ircuit reakers unit mount miniature circuit breakers (cable-in/cable-out) are ideal for

More information

3242 G 024 BX4 CS/CC 24 3,6 18,2 77,3 1,6 / 12,4 9 / ball bearings, preloaded 0,015. stainless steel 370 electronically reversible

3242 G 024 BX4 CS/CC 24 3,6 18,2 77,3 1,6 / 12,4 9 / ball bearings, preloaded 0,015. stainless steel 370 electronically reversible Brushless DC-Servomotor with integrated Motion Controller and or CN interface 6 mnm For combination with Gearheads: 3/1, 32, 32/3, 32/3 S, 38/1, 38/1 S, 38/2, 38/2 S 3242... BX4 CS/CC 1 2 3 4 Nominal voltage

More information

Contact Us Phone BODINE

Contact Us Phone BODINE Table of Contents What s New... 1 General Information... 2 About Bodine... 4 Integra... 7 E-Torq... 11 Custom Solutions... 15 AC Products... 23 Pacesetter AC Inverter Duty Products... 24 Technical Information...

More information

DD Motor Designation MDM. D D None 34 D NO H. DD Motor Designation. External Diameter Rated Troque Encoder Type

DD Motor Designation MDM. D D None 34 D NO H. DD Motor Designation. External Diameter Rated Troque Encoder Type Motor esignation XGT Servo System(X/XM) 90 / 91 Motor esignation MM None 34 NO H Motor Type Input Power Supply Rated Speed Shape of Shaft End : MOTOR None : 220 : 300rpm H : Hollow Type : 200rpm G : 150rpm

More information

External Bus Resistor Kit for LiquiFlo AC Drives Drive M/N s 120L4060, LF151200W4

External Bus Resistor Kit for LiquiFlo AC Drives Drive M/N s 120L4060, LF151200W4 External us Resistor Kit for LiquiFlo Drives Drive M/N s 120L4060, LF151200W4 Instruction Manual D2-3537!!!!! TTENTION: Only qualified electrical personnel familiar with the construction and operation

More information

Disconnect Switch and Circuit Breaker Mechanism Specifications Bulletin Number 1494

Disconnect Switch and Circuit Breaker Mechanism Specifications Bulletin Number 1494 Technical ata isconnect Switch and ircuit reaker Mechanism Specifications ulletin Number 1494 Topic Page 1494U isconnect Switch Specifications 2 1494, 1494F, 1494G, 1494R, 1494V isconnect Switch Specifications

More information

Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products.

Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application components have made a significant

More information

L1 (Standard Motor Length) L2 (Brake Motor Length)

L1 (Standard Motor Length) L2 (Brake Motor Length) HepcoMotion Geared Motor Option The optional geared motor will be the preferred choice for many applications as it provides an excellent combination of power, accuracy, flexibility and value. HepcoMotion

More information

Specialty Bearing Interchange Guide

Specialty Bearing Interchange Guide pecialty earing Interchange uide Only one name is synonymous with the finest-quality mounted tapered and spherical roller bearings, aldor odge. We are the standard against which all other bearings are

More information

High Efficiency Centrifugal Motorised Impellers and Fans

High Efficiency Centrifugal Motorised Impellers and Fans igh fficiency entrifugal Motorised mpellers and ans 96 899 99s or over a century... istory Originally formed over years ago within the US based Torin orporation, and established as its subsidiary in 96.

More information

Linear Position Technology EZ-track

Linear Position Technology EZ-track Rugged Rod Style Housings: Transducers designed to survive in harsh industrial environments to reduce downtime on the plant floor. The R10 housing, sensing rod and components are designed and constructed

More information

Tighteners and Idlers

Tighteners and Idlers Tighteners and Idlers...rive Tighteners, Idlers, Idler ushings, Set ollars, Keystock and ast Iron ars wide variety of specialized products for automatic production. rowning is adding new power transmission

More information

Selection Information Molded Case Circuit Breakers

Selection Information Molded Case Circuit Breakers Selection Information Molded ase ircuit reakers lass 500, 600, 800 PowerPact 150 H-rame PowerPact 250 J-rame Trip Version Trip Version ircuit reaker Type H H HJ HL HR J J JJ JL JR Number of 2, 3 2, 3 2,

More information

Features. IX SeriesTM. Features. IP65 sealing Roller screw provides 15X life of ball screw Low backlash. IM SeriesTM. Features

Features. IX SeriesTM. Features. IP65 sealing Roller screw provides 15X life of ball screw Low backlash. IM SeriesTM. Features xlar I Series Linear ctuator xlar I Series TM actuators present a new range of alternatives for linear motion solutions. The I Series actuators offer all of the benefits of xlar s planetary roller screw

More information

Husky 1050e Pumps Electric Double Diaphragm

Husky 1050e Pumps Electric Double Diaphragm usky 15e Pumps lectric ouble iaphragm Selector Tool To order a usky 15e, use the online selector tool at www.graco.com/pumpselectors or contact your distributor. NOT: heck the identification plate (I)

More information

Electro Clutches and Brakes Shaft Mounted Clutches and Brakes

Electro Clutches and Brakes Shaft Mounted Clutches and Brakes E/E Series Electro lutches and rakes Shaft Mounted lutches and rakes Shaft Mounted lutches E Series All the features of an electric clutch in a convenient, preassembled package. Mounts on any through shaft

More information

Pump Specifications. ELV Series Submersible Sump Pump with OilTector Control. ELV250 1/3 hp ELV280 1/2 hp ELV290 3/4 hp

Pump Specifications. ELV Series Submersible Sump Pump with OilTector Control. ELV250 1/3 hp ELV280 1/2 hp ELV290 3/4 hp Pump Specifications ELV Series Submersible Sump Pump with OilTector Control ELV250 1/3 hp ELV280 1/2 hp ELV290 3/4 hp ELV_ P1 R1/24/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications

More information

FT SERIES. FT Series Linear Actuators

FT SERIES. FT Series Linear Actuators T SRS OR ROR SRW TUTOR Mount virtually any servo motor ong stroke lengths available igh speed and long life Motors shown in drawings are for illustrative purposes only and are not included with T ctuators.

More information

Double Sealed on Both Sides in one piece housing for structural rigidity

Double Sealed on Both Sides in one piece housing for structural rigidity eries Right ngle elical/evel tainless teel ervofit odular ystem Features OER rives Inc. is proud to offer our quality-proven, high-efficiency eries elical/evel speed reducer in a stainless steel housing.

More information

501 SERIES. 501 Series Directional Control Valve Platform. Featuring Higher Flow in a Compact Valve Package. Commissioning Capabilities

501 SERIES. 501 Series Directional Control Valve Platform. Featuring Higher Flow in a Compact Valve Package. Commissioning Capabilities 501 Series irectional ontrol Valve Platform Featuring Higher Flow in a ompact Valve Package ommissioning apabilities Solenoid air pilot actuated Low wattage.8 wall for application solenoids Polarity insensitive

More information

ElectroCraft RapidPower Xtreme Brushless DC Servo Motors

ElectroCraft RapidPower Xtreme Brushless DC Servo Motors ElectroCraft RapidPower Xtreme Brushless DC Servo Motors Product Datasheets for RPX22 RPX32 RPX4 RPX52 About ElectroCraft is a global provider of dependable, application-engineered fractional-horsepower

More information

Full Product Line Overview

Full Product Line Overview Full Product Line Overview We make your products go. ur history Bison is founded by three engineers 1960 using the first letter of their last names - B, S, and N to create Bison name. 1987 Bison begins

More information

Sanitary Clamp, Full Port, 3-way Ball Valves (3-A approved) FEATURES. FLOW PLANS L Port

Sanitary Clamp, Full Port, 3-way Ball Valves (3-A approved) FEATURES. FLOW PLANS L Port 30 Series Sanitary lamp, ull Port, 3-way all Valves (3- approved) 3- pproved for use in food processing and dairy applications Valve Pressure / Temperature 1000 The ssured utomation 30 Series 3- approved,

More information

Quantum Series Size 17, 23, 34 and 56 Brushless Servo Motors Frameless and Housed Engineering Guide

Quantum Series Size 17, 23, 34 and 56 Brushless Servo Motors Frameless and Housed Engineering Guide MACCON GmbH Kübachstr.9 D-81543 München Tel +49-89-65122()-21 Fax +49-89-655217 Quantum Series Size 17, 23, 34 and 56 Brushless Servo Motors Frameless and Housed Engineering Guide Selection Guide Quantum

More information

Low-Speed. Constant Speed Motors. Standard AC Motors A-203. Standard AC Motors Introduction. Low-Speed Synchronous Motors.

Low-Speed. Constant Speed Motors. Standard AC Motors A-203. Standard AC Motors Introduction. Low-Speed Synchronous Motors. Standard C Constant Speed Low-Speed Synchronous Standard C Introduction Induction Reversible Electromagnetic Brake V Series Clutch & Brake Synchronous Low-Speed Synchronous Low-Speed Synchronous Watertight,

More information

EM Series Electro Module

EM Series Electro Module Individual lutch or Brake Module ombine to omprise a lutch, Brake or lutch/brake ombination Electro Modules are individual clutch or brake units which are assembled together to comprise a clutch, brake,

More information

Poppet Series Compressed Air & Vacuum

Poppet Series Compressed Air & Vacuum Poppet Series ompressed ir & Vacuum www.asco.com Table of ontents Poppet eatures and enefits ow to Order N Series - ompressed ir Valve Solenoid ir Pilot ctuated /8" to /8" Technical ata /8" to /8" imensions

More information

Voltage 12V 18V 24V 36V 48V 72V 80V 96V 120V 144V Color Yellow Orange Red Gray Blue Green Black Brown Purple White PRODUCT INFORMATION

Voltage 12V 18V 24V 36V 48V 72V 80V 96V 120V 144V Color Yellow Orange Red Gray Blue Green Black Brown Purple White PRODUCT INFORMATION S onnector amily TURS Prevents accidental mating of components operating at different voltage levels Single-piece housing and unitized construction Provides industrial quality and durability P mounted

More information

SE Encore Multimount Worm Gear Speed Reducers

SE Encore Multimount Worm Gear Speed Reducers S ncore Worm ear Speed Reducers VILL IN 24 HOURS! Winuard lack poxy Coating System Quill Input daptor Solid Output Shaft(s) (Standard Diameter) Hollow Output Shafts (Max Standard ore) ushing Kits ase Kits

More information

Hyponic. Hypoid Right Angle Gearmotor and Reducer CATALOG

Hyponic. Hypoid Right Angle Gearmotor and Reducer CATALOG Hypoid Right ngle Gearmotor and Reducer CTLOG..5. Hypoid Right ngle Patented, High-Performance Gearmotors and Reducers Featuring ll-steel Hypoid Gearing U. S. PT. NO. 5,,; U.S. PT. NO. 5,75,79 95% Outstanding

More information

R-Rated medium voltage fuses for motor circuit protection

R-Rated medium voltage fuses for motor circuit protection Technical ata 6001 Supersedes ecember 2015 Features and benefits escription: Indoor/enclosure, R-Rated medium voltage, current-limiting fuses for motor circuit protection. urrent-limiting R-Rated fuses

More information

Definite Purpose Control. Product Focus

Definite Purpose Control. Product Focus Product Focus Innovation in Eaton s utler-hammer efinite Purpose (P) ontactors are designed to improve control of refrigeration, air conditioning, ventilation and resistance heating applications. The

More information

Amazing Reliability & Deliver y ALL NEW F O R M O T O R C O N T R O L S

Amazing Reliability & Deliver y ALL NEW F O R M O T O R C O N T R O L S Amazing Reliability & Deliver y ALL NEW F O R 2 0 0 7 M O T O R C O N T R O L S MOTOR CONTROL SOLUTIONS Save Time Ensure Performance Save Money! Prepackaged Control Kits from Dorner Includes all mounting

More information

Communications cable with PC COM ERR. Copy. RJ-45 / USB Adapter. Verify. Remote Operator Extansion Cable. 24 VDC Control Board Power Supply

Communications cable with PC COM ERR. Copy. RJ-45 / USB Adapter. Verify. Remote Operator Extansion Cable. 24 VDC Control Board Power Supply YSKW IMR- 000 High performance Vector ontrol urrent vector control, with or without PG High starting torque (200% / 0.3 Hz, spd range :200 OLV), (200% at 0 r/min, spd range :500 LV) ouble rating N 20%/min

More information

Press Section Overview

Press Section Overview Section Overview -200 Type and unctions Page -rame es 1-200 Roll rame es R 5-20 -lamp es 8 - rbor es 8 ench rame 8-200 ccessories Speed hart -200 ustom uilt es 1 5 1-0 Tension Meter ells TM L 2 pplication

More information

Technical description... 1 Limit switch versions MR 6 Power tables... 6 Dimensions... 7 Spare part lists... 8

Technical description... 1 Limit switch versions MR 6 Power tables... 6 Dimensions... 7 Spare part lists... 8 Index Technical description... 1 Limit switch versions... 3 MR 6 Power tables... 6 Dimensions... 7 Spare part lists... 8 MS 12 Power tables... 10 Dimensions... 11 Spare part lists... 13 MR 30 Power tables...

More information

DMC-500 TM. DC Motor Drive Control. Operation / Installation Manual Manual Part Number: S8M5003 Date: August 11, Computer Weld Technology, Inc.

DMC-500 TM. DC Motor Drive Control. Operation / Installation Manual Manual Part Number: S8M5003 Date: August 11, Computer Weld Technology, Inc. omputer Weld Technology, Inc. 070 Old ammel N Houston Rd. Houston, TX 77086 Telephone: (7) 46-8 Fax: (7) 46-50 DM-500 TM D Motor Drive ontrol Operation / Installation Manual Manual Part Number: S8M500

More information

4.2. Definite Purpose Contactors and Starters. Contents A, Two-, Three- and Four-Pole C25. Contactors

4.2. Definite Purpose Contactors and Starters. Contents A, Two-, Three- and Four-Pole C25. Contactors .2 Definite Purpose and Starters 5 360, Two-, Three- and Four-Pole 25 5 360, Two-, Three- and Four-Pole 25 Product Description Eaton offers the most comprehensive line of definite purpose contactors in

More information

SUPER-MAX INDUCTION MOTOR

SUPER-MAX INDUCTION MOTOR SUPR-MX INUTIN MTR PRMIUM FFIINY SRIS PN RIP PRF FRM: 143T~5807N ompliance ertificate No.014 pplication: onstant torque 10:1 ariable torque 100:1 3-YR WRRNTY TTUN SUPRMX-P STNR FTURS PWR SUPPLY 3 phase,

More information