Standard Products Catalog

Transcription

1 Standard Products atalog Induction Permanent Magnet D rushless D Parallel Gearmotors Motors ontrols Upgraded 3-Phase Models! pages 8 bodine-electric.com S-17a

2 D / SQ MX MX ± ±.008 NOT MHINED.92±.02 FLT.450 [4] #10-32 UNF MIN PRT NO./REV: SHEET: 1/1 SLE: 1: SQ MX TYP (1.326) TYP 2 1 DESRIPTION: GERMOTOR 222EL-D3/4 1 UNLESS OTHERWISE SPEIFIED: UNITS RE IN INHES [mm] TOLERNES:.XX:±.01.XXX:±.005 NGLES: X :±3 X.X :±0.5 (.582) TYP TYP D For 2D/3D D drawings and distributor locations, go to Our website features the latest product specifications, technical documents, connection diagrams and instruction manuals. Dimension drawings and 3D models can be imported from the website directly into most D software programs. You will also find information about odine s newest products, our distributor locator, and helpful Tech Tools designed to answer the most commonly asked motion control questions. ODINE ELETRI OMPNY INFM0216 REPRESENTTIVE OF MODEL NUMER(S): UL/S Safety ompliance Products are marked curus conform to UL standard 1004 or UR/S, and most products and S standard 22.2 No. meet E. ll products are also 100. They are documented in RoHS OMPLINT RoHS compliant. UL file number E47177 and Motors and gearmotors S file number LR2797. Electronic controls conform to UL standard 508 and S standard 22.2 No. 14. They are documented in UL file number E44529 and S file number LR Motor Options For the comparative advantages of motors and gearmotors, see page 21. Variable speed Pacesetter motors Voltage ratings are 230 V, 60 Hz (3-phase) or 230/460 V, 60 Hz (3-phase) Fixed-speed motors Voltage ratings are 115 V, 60 Hz (single-phase) or 230 V, 60 Hz (3-phase) Metric voltage ratings are 230 V, 50 Hz (1- or 3-phase) Permanent Magnet D motors Voltage ratings are 12/24 VD, 24 VD, 90/130 VD or 130 VD Metric voltage rating is 180 VD ompatible with 90 V controls (90/130 VD and 130 VD only) rushless D (EM) motors Voltage ratings are 24 or 130 VD Variable Pacesetter Inverter Duty Fixed- Permanent Magnet D rushless D INTEGR LD 30R 34R 42R 48R K-2 30R 34R 42R 48R Power (HP) 1/25-1/17 1/8-1/4 3/8 1/3-3/4 1/1600-1/200 1/40-1/30 1/15-1/5 1/12-1/4 1/5-1/2 1/50-1/7 1/16-1/3 1/4-1/2 1/16-1/5 1/5-3/8 1/16-1/8 1/4 (oz-in.) Rated , , , 1550, 1800, , 1800, 1700, 1800, , , , 11, , 10, , 10, opyright atalog data subject to change without notice. ll rights reserved. Printed in the U.S.. 2 TLOG S-17a.3 odine Electric ompany

3 Table of ontents Gearmotors TORQUE GERHED SPEIFITIONS DIMENSIONS Parallel up to 120 oz-in Type /T (K-2) up to 40 lb-in Type D up to 120 lb-in Type Z up to 210 lb-in Type WX up to 350 lb-in Type FX up to 350 lb-in Type E/F/FX up to 1,000 lb-in Type HG up to 1,000 lb-in Type G Right ngle up to 37 lb-in Type 3N/3F up to 77 lb-in Type 5R/5L up to 121 lb-in Type 5N up to 121 lb-in Type 5F up to 148 lb-in Type 3RD up to 296 lb-in Type 5H up to 380 lb-in Type G Hollow Motors Without Gearing MOTOR TYPE POWER SPEIFITIONS DIMENSIONS Motors from 3.5 to 68 oz-in Variable Pacesetter Inverter Duty from 1/25 to 3/4 HP Fixed Induction up to 1/2 HP Permanent Magnet D up to 1/2 HP rushless D up to 1/2 HP Direct Drive rushless D e-torq... up to 3.5 HP Motor ontrols Pacesetter Inverters (for 230V Motors) D Motor ontrols (for 12/24 and 90/130V Motors) rushless D ontrols (for 12/24V and 130V Motors) ccessories Reference Drawings and Dimensions Purchase a odine gearmotor and speed control together and get our extended 2-year system warranty. system warranty Metric Motors and Gearmotors Metric Parallel up to 0.67 Nm Type /T (K-2) up to 11.3 Nm Type D up to 11.3 Nm Type Z up to 19.8 Nm Type W up to 35.0 Nm Type E/F Metric Right ngle up to 16.7 Nm Type 3F up to 10.5 Nm Type 5N/5F up to 14.2 Nm Type 5H up to 43.0 Nm Type G Metric Motors without Gearing up to 140 Watts Fixed Induction up to 112 Watts Permanent Magnet D Most products are marked as and are RoHS OMPLINT Reference Hollow Gearmotor enefits Safe Operating and rea ommon bbreviations omparative dvantages of Motors and Gearmotors Regulation of Permanent Magnet D Motors TLOG S-17a.3 3

4 Gearmotors odine Electric ompany offers a wide selection of standard gearmotors, ranging from 1/200 to 3/4 HP (4 to 560 Watts). Our standard product line includes fixed speed and variable speed, as well as an extensive selection of permanent magnet D, and brushless D gearmotors, motors and controls. We offer parallel shaft, right angle, and hollow shaft gearmotors, with torque ratings ranging from 1 to 1,000 lb-in. ( Nm). Parallel Gearmotors /T Parallel Gearmotors up to 120 oz-in. Totally enclosed, nonventilated IP-20 rating Permanently lubricated, noise tested ball bearings Three-wire winding simplifies reversing Impedance protected to prevent current overload (gearmotor should not be stalled when powered up) apacitor is included with gearmotor See page 37 for reference dimensions Fixed Gearmotors Rated Motor Gear Radial Load apacitor Product Model V Hz Ph mps (oz-in.) HP Ratio (oz.) (µf/v) Type Permanent Split apacitor Normal Slip, Non-synchronous PITOR IS INLUDED / /250 KI-22T5 N / /250 KI-22T / /250 KI-22T / /250 KI-22T / /250 KI-23T / /250 KI-24T / /250 KI-24T / /250 KI / /250 KI / /250 KI / /250 KI / /250 KI / /250 KI Permanent Split apacitor High Slip, Non-synchronous PITOR IS INLUDED / /250 KI-22T5 N / /250 KI-22T Type K-2/T / /250 KI-22T / /250 KI-23T / /250 KI-24T / /250 KI / /250 KI / /250 KI / /250 KI Permanent Split apacitor, Synchronous PITOR IS INLUDED / /250 KY-22T5 N / /250 KY-22T5 N / /250 KY-22T / /250 KY-24T / /250 KY-22T4 N / /250 KY-24T4 N / /250 KY-24T / /250 KY / /250 KY TLOG S-17a.3 odine Electric ompany

5 up to 40 lb-in. Parallel Gearmotors D Unvented gearhousing for universal horizontal mounting Helical primary gear for quietness and hardened steel spur gearing Three-Phase, Inverter Duty, Non-synchronous (TENV) / R2EPP-D / R2EPP-D4 N2212 Type 30R-D Pacesetter constant / R2EPP-D3 N / R4EPP-D Fixed Gearmotors Rated Radial Load apacitor Model Motor HP V Hz Ph mps Gear Ratio (lb-in.) (µf/v) Permanent Split apacitor, Non-synchronous PITOR IS REQUIRED / /250 30R1EI-D / /250 30R1EI-D / /250 30R1EI-D / /250 30R2EI-D / /250 30R2EI-D / /250 30R2EI-D / /250 30R2EI-D Type 30R-D / /250 30R2EI-D Permanent Magnet D Gearmotors Rated Peak Radial ccy No ccy ccy No ccy Rated urrent (mps) Motor Gear Load HP Ratio (lb-in.) 24V 130V (lb-in.) 24V 130V / EPM-D5 N4999 N4799 N / EPM-D5 N4998 N4798 N / EPM-D4 N4997 N4797 N / EPM-D4 N4996 N4796 N / EPM-D / EPM-D3 N4995 N4795 N / EPM-D / EPM-D3 N4994 N4794 N / EPM-D / EPM-D3 N4993 N4793 N Type 24-D / EPM-D / EPM-D3 N4992 N4792 N / EPM-D / EPM-D3 N4991 N4791 N rushless D Gearmotors Rated Rated urrent () Peak ccy No ccy ccy No ccy Motor Gear Radial Load HP Ratio (lb-in.) 24V 130V (lb-in.) 24V 130V EL-D4 N3636 N3536 N EL-D4 N3635 N3535 N3431 N EL-D3 N3634 N3534 N3430 N / EL-D N3529 N EL-D3 N3628 N3528 N3428 N3328 Type 22-D EL-D3 N3627 N3527 N EL-D3 N3626 N3526 N INTEGRmotor LD Gearmotors Motor Output ontrol Input Model Range Gear HP Volts (VD) ontinuous Type SR Type FV Type SR Type FV (lb-in.) Ratio mps nalog Interface Digital Interface EL/**-D5 N3837 N EL/**-D N EL/**-D4 N3835 N EL/**-D3 N3834 N3734 1/ EL/**-D N EL/**-D3 N3828 N EL/**-D N3727 Type 22/SR-D and 22/FV-D EL/**-D N3726 INTEGRmotor 1 SO: ontact the factory for detailed speed/torque information (Safe Operating rea). See page The fifth character of the product type changes from to F for accessory ready models. on subsequent stages for high output torque and long life See page 24 for controls Fixed Rating Variable (SO) Ratings 1 Motor Gear Range Hz (lb-in.) HP Ratio Range (Hz) Type (lb-in.) (lb-in.) (lb-in.) 3 Type FV INTEGRmotors require a PWM signal from a motion controller or PL to operate. ** INTEGRmotor can be ordered with either analog (/SR) or digital (/FV) interface option. N model numbers require lead time and minimum quantities. TLOG S-17 apacitors and accessories on page 34 See page 36 for reference dimensions Variable Pacesetter Inverter Duty Gearmotors (230V) Model 5

6 Z Parallel Gearmotors up to 120 lb-in. Unvented gearhousing for universal horizontal mounting Permanently lubricated with high-performance lubricant Helical primary gear for quietness and hardened steel spur gearing on subsequent stages for high output torque and long life Models with accessory shafts are ideal for mounting encoders or brakes See page 34 for capacitors and accessories See page 36 for reference dimensions Variable Pacesetter Inverter Duty Gearmotors Fixed Rating Variable (SO) Ratings 1 (230V) Motor Model Gear Range Hz (lb-in.) HP Ratio Range (Hz) Type (lb-in.) (lb-in.) (lb-in.) Three-Phase, Inverter Duty, Non-synchronous, 230 V (TENV) R6EPP-Z R6EPP-Z4 N2222 Type 34R-Z Pacesetter R6EPP-Z3 N2224 1/ constant R6EPP-Z R6EPP-Z2 N R6EPP-Z2 N2228 Fixed Gearmotors Rated Radial Load apacitor Model Motor HP V Hz Ph mps Gear Ratio (lb-in.) (µf/v) Permanent Split apacitor, Non-synchronous PITOR IS REQUIRED R4FI-Z R4FI-Z R4FI-Z / /250 34R4FI-Z Type 34R-Z R4FI-Z R4FI-Z R4FI-Z Permanent Magnet D Gearmotors Type 24-Z Type 33-Z Rated Rated urrent (mps) Peak Radial ccy No ccy ccy No ccy Motor Gear Load HP Ratio (lb-in.) 24V 130V (lb-in.) 24V 130V 24-Z PMD Gearmotor EPM-Z4 N N EPM-Z4 N4962 N4662 N EPM-Z3 N N / EPM-Z3 N N EPM-Z2 N4959 N4659 N EPM-Z2 N4958 N4658 N EPM-Z2 N N4557 N Z PMD Gearmotor EPM-Z3 N6969 N6669 N EPM-Z3 N6968 N6668 N / EPM-Z2 N6967 N6667 N EPM-Z2 N6966 N6666 N EPM-Z2 N6965 N6665 N rushless D Gearmotors Type 22-Z Rated Rated urrent (mps) Peak Radial ccy No ccy ccy No ccy Motor Gear Product Load HP Ratio Type (lb-in.) 24V 130V (lb-in.) 24V 130V / EL-Z4 N / EL-Z4 N / EL-Z4 N3564 N / EL-Z4 N3462 N / EL-Z4 N / EL-Z N3561 N3461 N / EL-Z3 N3660 N3560 N3460 N / EL-Z2 N3659 N3559 N3459 N / EL-Z2 N3658 N3558 N / EL-Z2 N3657 N3557 N SO: ontact the factory for detailed speed/torque information (Safe Operating rea). See page The fifth character of the product type changes from to F for accessory ready models. 3 Type FV INTEGRmotors require a PWM signal from a motion controller or PL to operate. ** INTEGRmotor can be ordered with either analog (/SR) or digital (/FV) interface option. N model numbers require lead time and minimum quantities. 6 TLOG S-17a.3 odine Electric ompany

7 INTEGRmotor LD Gearmotors Motor Output ontrol Input Model Range Gear Volts ontinuous Type SR Type FV HP Type SR Type FV (lb-in.) Ratio (VD) mps nalog Interface Digital Interface / EL/**-Z4 N3864 N / EL/**-Z N / EL/**-Z4 N3862 N / EL/**-Z3 N3861 N / EL/**-Z N / EL/**-Z2 N3859 N3759 Type22/SR-Z and 22/FV-Z / EL/**-Z2 N3858 N3758 INTEGRmotor / EL/**-Z N3757 up to 210 lb-in. Parallel Gearmotors WX Up to 65% more torque than previous models Unvented gearhousing Selectively hardened steel helical gears Synthetic lubricant Models with accessory shafts are ideal for mounting encoders or brakes daptor plate, model 0995, allows for 3-hole mounting configuration. See page 34 See page 34 for capacitors and accessories See page 36 for reference dimensions Fixed Gearmotors Rated Gear Radial Load apacitor Model Motor HP V Hz Ph mps (lb-in.) Ratio (µf/v) Permanent Split apacitor, Non-synchronous, 3-Wire-Reversible (TEF) PITOR IS REQUIRED R6FI-WX R6FI-WX R6FI-WX R6FI-WX R6FI-WX R6FI-WX / / R6FI-WX Type 34R-WX R6FI-WX R6FI-WX R6FI-WX R6FI-WX R6FI-WX Permanent Magnet D Gearmotors Rated mps HP FF Gear Radial ccy No ccy No 12/24V 90/130V (lb-in.) 12/24V 90/130V 12/24V 90/130V 90/130V Ratio Load 12/24V 90/130V 2.9 / / EPM-WX / / EPM-WX / / EPM-WX / / EPM-WX / / EPM-WX / / / 1/11 / 1/8 / 1.4 / EPM-WX / / /4 1/ EPM-WX / / EPM-WX Type 33-WX 65 / / EPM-WX / / EPM-WX / / EPM-WX / / EPM-WX rushless D Gearmotors Rated Rated urrent (mps) Radial ccy No ccy ccy No ccy Motor Gear Load HP Ratio (lb-in.) 24V 130V 24V 130V EL-WX EL-WX EL-WX EL-WX EL-WX EL-WX / EL-WX EL-WX EL-WX EL-WX Type 34-WX EL-WX EL-WX TLOG S-17a.3 7

8 FX Parallel Gearmotors up to 350 lb-in. FX and F-type: hardened helical gearing for quietness and high output to size ratio Unvented gearhousing for universal horizontal mounting Models with accessory shafts are ideal for mounting encoders or brakes See page 34 for capacitors and accessories See page 36 for reference dimensions Variable Pacesetter Inverter Duty Gearmotors Fixed Rating Variable (SO) Ratings 1 230V 230/460V Model Model No. HP (230V) (230/460V) Gear Range Hz (lb-in.) mps mps Ratio Range (Hz) Type No. (lb-in.) (lb-in.) (lb-in.) 34R-FX Pacesetter Gearmotor Three-Phase, Inverter Duty, Non-synchronous (TEF) constant R4FPP-FX4 N Type 34R-FX Pacesetter constant R4FPP-FX constant R4FPP-FX / / variable R4FPP-FX variable R4FPP-FX variable R4FPP-FX2 N variable R4FPP-FX1 N R-FX Pacesetter Gearmotor Three-Phase, Inverter Duty, Non-synchronous (TEF) constant R6FPP-FX variable R6FPP-FX / / variable R6FPP-FX2 N Type 42R-FX Pacesetter variable R6FPP-FX variable R6FPP-FX Fixed Gearmotors Rated Gear Radial Load apacitor Model Motor HP V Hz Ph mps (lb-in.) Ratio (µf/v) 42R-FX Fixed Gearmotors Permanent Split apacitor, Three-Wire Reversible, Non-Synchronous PITOR IS REQUIRED R6FI-FX R6FI-FX R6FI-FX R6FI-FX / /250 42R6FI-FX R6FI-FX R6FI-FX R6FI-FX R6FI-FX Split Phase (with centrifugal switch), Non-synchronous R5FSI-FX R5FSI-FX Type 42R-FX R5FSI-FX R5FSI-FX R5FSI-FX / R5FSI-FX R5FSI-FX R5FSI-FX R5FSI-FX R5FSI-FX R5FSI-FX R-FX Fixed Gearmotor Permanent Split apacitor, Non-synchronous PITOR IS REQUIRED R6FI-FX3 N R6FI-FX3 N V=20.0/ /3 115/ / R6FI-FX2 N V=12.5/ R6FI-FX2 N R6FI-FX1 N5691 Split Phase (with centrifugal switch), Non-synchronous Type 48R-FX R6FSI-FX R6FSI-FX /3 115/ / R6FSI-FX R6FSI-FX TLOG S-17a.3 odine Electric ompany

9 42-FX Gearmotor 90/130V lass F Temperature Rating 6 / / EPM-FX / / EPM-FX / / EPM-FX / / EPM-FX / / EPM-FX / 2.8 3/16 / 3/8 1.4 / / / EPM-FX / / EPM-FX / / EPM-FX / / EPM-FX / / EPM-FX /24V lass F Temperature Rating 3 / EPM-FX / EPM-FX / EPM-FX Type 425-FX 17 / EPM-FX / EPM-FX /7 / 3/ / EPM-FX / EPM-FX / EPM-FX / EPM-FX / EPM-FX rushless D Gearmotors Rated Peak Radial ccy No ccy ccy No ccy Rated urrent (mps) Motor Gear Load HP Ratio (lb-in.) 24V 130V (lb-in.) 24V 130V / EL-E4 N3575 N / EL-E4 N / EL-E4 N / EL-E3 N N / EL-F3 N / EL-E3 N3683 N / EL-F3 N / EL-E3 N3682 N Type 34-E/F / EL-F2 N3470 N / EL-E2 N3680 N3580 N / EL-F / EL-E1 N Rated (lb-in.) Rated (lb-in.) Rated urrent (mps) 24V Rated urrent (mps) Peak (lb-in.) Peak (lb-in.) 475 Motor HP Motor HP Gear Ratio Radial Load Model 4 INTEGRmotor LD Gearmotors FEL/FV-F4 N FEL/FV-F3 N FEL/FV-F / FEL/FV-F3 N FEL/FV-F3 N FEL/FV-F2 N FEL/FV-F1 N3779 Type 34/FV-F INTEGRmotor 1 SO: ontact the factory for detailed speed/torque information (Safe Operating rea). See page The fifth character of the product type changes from to F for accessory ready models. 3 E-type only: selectively hardened all steel helical gears for long life. 4 Type FV INTEGRmotors require a PWM signal from a motion controller or PL to operate. N model numbers require lead time and minimum quantities. Most FX models ship within 2-5 business days. FF Gear Ratio Radial Load 2 ccy No ccy Permanent Magnet D Gearmotors ccy 12/24V 90/130V No ccy TLOG S-17a.3 9

10 HG Parallel Gearmotors up to 1,000 lb-in. Unvented gearhousing Flexible mounting and high torque in a compact package Face-mount from drive shaft side Models with accessory shafts are ideal for mounting encoders or brakes See page 34 for capacitors and terminal boxes See page 37 for reference dimensions Variable Pacesetter Inverter Duty Gearmotors Type 42R-HG Pacesetter Fixed Gearmotors Rated Radial Load apacitor Model Motor HP V Hz Ph mps Gear Ratio (lb-in.) (µf/v) Permanent Split apacitor, Non-synchronous (TEF) PITOR IS REQUIRED N Type 42R-HG 1/ / R6FI-HG N N5259 Permanent Magnet D Gearmotors Type 33-HG Fixed Rating Variable (SO) Ratings 1 Radial Motor Load Gear Hz (lb-in.) HP Ratio Range Range (Hz) Type (lb-in.) (lb-in.) (lb-in.) Rated (lb-in.) Product Type 230V Model Three -Phase, Inverter duty, Non-synchronous (TEF) 16 1, , N2247 3/ variable R6FPP-HG N Rated urrent ccy No ccy ccy No ccy (mps) Motor Gear Radial HP Ratio Load 2 24V 90/130V 24V 90/130V 24V Models With lass F Temperature Rating N6823 N N / EPM-HG N N6893 N /130V Models With lass F Temperature Rating 16 / / N / / N / 2.4 1/6 / 1/ EPM-HG 38 / / N6356 N / / N SO: ontact the factory for detailed speed/torque information (Safe Operating rea). See page The fifth digit of the product type changes from to F for accessory ready models. N model numbers require lead time and minimum quantities. 10 TLOG S-17a.3 odine Electric ompany

11 up to 1,000 lb-in. Parallel Gearmotors G Unvented gearhousing for universal horizontal mounting Selectively hardened steel gears for quietness and hardened steel spur gearing on subsequent stages for high output torque and long life Extra heavy-duty bearings and seals Face or base mounting Oversize drive shaft Models with accessory shafts are ideal for mounting encoders or brakes See page 34 for accessories See page 37 for reference dimensions Variable Pacesetter Inverter Duty Gearmotors Fixed Rating Variable (SO) Ratings 1 Radial Motor (230/460V) Gear Frequency Load Hz (lb-in.) HP mps Ratio Range (Hz) Type (lb-in.) (lb-in.) (lb-in.) Rated (lb-in.) Rated urrent (mps) Gear Ratio Radial Load ccy No ccy ccy Type 48R-G Pacesetter Permanent Magnet D Gearmotors No ccy Motor HP 2 24V 130V 24V Models With lass F Temperature Rating / EPM-G V Models with lass F Temperature Rating 230/460V Model Three-Phase, Inverter duty, Non-synchronous (TEF) ,000 1,000 1, /4 2.7/ onstant R6FPP-G / EPM-G Type 42-G 1 SO: ontact the factory for detailed speed/torque information (Safe Operating rea). See page The fifth digit of the product type changes from to F for accessory ready models. TLOG S-17a.3 11

12 ccessories see for accessory dimensions L rackets D E F Model No. Description 0969 Kit for E, F and FX gearmotors (will not fit 48R-F or 48R-FX) 0970 Kit for WX gearmotors 0979 Kit for 34R and 34 motors D 0980 Kit for 34R-Z gearmotors E 0990 Kit for 24 motors F 5968 Kit for 30R and 33 motors; 30R-D, 24-D, 22-D, 24-Z, 33-Z and 22-Z gearmotors D Motor and Gearmotor Kits, D E F, G I H apacitors Model No. Description 0967 ase plate kit for 3F gearmotors 0977 IP-44 protection kit for 33 gearmotors and motors 0978 IP-44 protection kit for 42 gearmotors and motors D 0984 Die cast terminal box kit for 34R, 42R, 48R, and 33, 42 motors and gearmotors (D: does not fit on 12 or 24VD models) E 0985 Oversized die cast t-box kit. Fits capacitor for use with 42R-FX gearmotors. lso fits 42R, 48R, 33 and 42 motors/gearmotors Die cast terminal box with terminal block for 30R motors and gearmotors 1984 Die cast terminal box kit with terminal block for 34R, 42R, 48R, 33 and 42 motors/gmtrs. 90/130, 130V and 180VD models only Die cast terminal box for 30R motors and gearmotors F 0992 daptor plate for mounting brakes or encoders for 33/42 gearmotors/motors with accy. ready shaft extensions G 0993 daptor plate for mounting brakes or encoders for 22/34 gearmotors/motors with accy. ready shaft extensions H hole adaptor plate for E, F, WX and FX gearmotors. Provides drop-in replacement for competitive gearmotors. I 0996 ase kit for 34R motors and gearmotors ox-type apacitor Metal an-type apacitor, Select the appropriate run capacitor based on the capacitor specifications found on pages 4-21 (29-33 for metric models) and in the tables below. The gearmotor or motor nameplate states the required capacitance of the run capacitor, but it is also critical to specify a capacitor that has the voltage ratings as shown in these tables. When using a run capacitor that is not supplied by odine Electric, please make sure the voltage rating is equal to or higher than the voltage rating specified on this page. Different motor sizes might require a different minimum voltage rating for the run capacitor. apacitors Part No. µf /V ox-type Metalized Film apacitor (Plastic ase) / / / / / / / / /250 Part No. µf /V / / , 3 7.5/ / / / / / / / /250 Part No. µf /V / / / / /350 Round Metal an-type apacitor / / / /450 1 apacitor fits inside terminal box kit model apacitor fits inside oversized terminal box model number New capacitor part number effective 06/2016. apacitor Mounting lamps Model No. Description Mounting clamp for round, metal can type capacitor model Mounting clamp for round, metal can type capacitors: models , , and For mounting details and dimensions, visit 34 TLOG S-17a.3 odine Electric ompany

13 rake Kit for D Motors and Gearmotor D Model No. Static (lb-in.) Volt Ohms Wt. (oz.) This item is intended only for 33 and 42 PMD motors and gearmotors. ontrol ccessories LD PMD Item Model No. Description 0888 nalog Interface oard for use with model 0810, 0830, and 0850 controls. llows control to accept a variable voltage or current signal from user s host controller to automatically control motor speed. Inputs are optically isolated Electronic Direction and raking oard, F--R Kit, for use with model 0810, 0830, and 0850 controls. llows user to change motor direction and to dynamically brake motor to a quick stop. Inputs are not optically isolated. This kit includes one F--R board, one cable and connector, mounting hardware, and two additional braking resistors Local/Remote Switch for use with model 0810, 0830, and 0850 controls when used with accessory model llows user to switch between automatic and manual operation Switch Sealing Kit upgrades NEM-12 brushless D and PMD enclosed controls to IP-44 rating able Kit for stock 34/FV INTEGRmotors. : six feet (3 cables: power, logic and encoder) Extension able for model 3910, 3911, 3921 and 3912 controls. Extends the cable between the motor and control by six feet. oth ends are equipped with circular connections for easy connection between model 3983 cable assembly or encased control and the motor. : six feet onnection able ssembly for connecting model 3910, 3921 and 3911 chassis controls to stock 130 V motors. One end of the cable is equipped with a circular connector, the other end is equipped with quick disconnects for phase leads, and a molded connector for the commutation leads. : 6 feet. D 3984 nalog Interface nd Isolation Module for model 3910, 3911,3921 and 3912 controls. Provides nalog interface and isolates controls from system controller input signals which may be at different potentials Potentiometer Kit for use with FPM controls. ontains 10k Ohm potentiometer, hardware, wire and connector for manually regulating motor speed Fuse and Potentiometer Kit for use with model 3910 control. ontains potentiometer for manually regulating motor speed and various fuses to cover the range of motors and gearmotors which can be used with the control. D Metric ccessories Metric L rackets D D Item Model No. Description 0990 Metric Kit for Metric Kit for 33 motors, and type D and Z gearmotors 1970 Metric Kit for type W gearmotors D 1969 Metric Kit for E, F and FX gearmotors (will not fit 48R-F or 48R-FX) no L bracket kits are available for 34R and 34R-Z gearmotors Metric Motor and Gearmotor Kits D Item Model No. Description 1982 Metric die cast terminal box kit for 30R motors and gearmotors 1984 Metric die cast terminal kit with terminal block for 33, 34R, 42 and 42R motors and gearmotors. For 90/130, 130V and 180VD models only Metric die cast base kit for 42 motors and gearmotors 0992 Metric adaptor plate for 33 and 42 motors and gearmotors TLOG S-17a.3 35

14 Reference Drawings and Dimensions Parallel Gearmotor Dimensions Dimensions (in inches) are for reference only. For D drawings and up-to-date specifications, please visit ccessory L (on Select Models) D/LD Lead Exit Motor Diameter F Hub G enter to mounting hole (top) I Hub Width E Detail Gearhead Width (square) Lead Exit XH Gearhead Type D, Z, WX, E/F, pages 5-9 Product Type Wt. XH K J Diameter (Height) Mounting Detail enter to Mounting Hole (bottom) Width (square) H D Mounting Pattern Width D Diameter Dia. E Detail F Hub G Hub Width H Mounting Pattern Width I enter to Mounting Hole (top) J enter to Mounting Hole (bottom) K Mounting Detail Type D Gearmotor 242-D Yes D 2.42 [4] D Yes 24 UNF-2 x D 222-D Flat Yes 12 or 24 deep on a 22-D 222-D No None INTEGR Type Z Gearmotor 34R4-Z4/ R-Z 34R6-Z4/ R4-Z [4]10-32 No 12 34R6-Z Flat/ UNF-2 x Z Key deep on a 24-Z Z3/Z Yes Z Z Z Z Yes 22-Z 222-Z [4]10-32 No 12 or Z Flat/ UNF-2 x.46 Yes Z Key deep on a 22-Z 223-Z No None INTEGR 222-Z Type WX Gearmotor 34R-WX 34R6-WX [4]1/4-28 UNF- No WX 335-WX Key x.50 deep Yes WX 343-WX on a Yes 12 or 24 Type E/F & FX Gearmotor 34R-FX 34R4-FX R-FX 42R5-FX No R6-FX [4]1/ R-FX 48R6-FX UNF-2 x.50 No Key FX 425-FX deep on a Yes E No 34-E/F 344-E/F Yes 12 or F Yes Only the first four characters of the product type are relevant to dimensions. L cc y ord/ Lead (in.) 36 TLOG S-17a.3 odine Electric ompany

15 D/LD Lead Exit Height Hub E H G (square) I DDetail Lead Exit XH J Mounting Detail Diameter Hub F Width Gearhead Type K-2/T, 30R-D, pages 4-5 XH Product Wt. Type (square) Type K-2 Gearmotor K-2T K Type 30R-D Gearmotor 30R R-D 30R R Height (square) Diameter D Detail E Hub F Hub Width G Mounting Pattern Width H enter to Mounting Hole I enter to Mounting Hole Flat Flat Flat J Mounting Detail [2]8-32 UN-2 [2]8-32 UN-2 [4]10-32 UNF-2 x.38 deep Max. Lead/ ord (in.) Only the first four characters of the product type are relevant to dimensions Gearhead Type HG, page 10 Product Type Weight XH Diameter Height cc y Only the first four characters of the product type are relevant to dimensions Lead/ ord (in.) 42R-HG 42R6-HG No HG 337-HG Yes ± KEY ccessory (on Select Models) D Lead Exit Motor Diameter [4] 1/4-20 UN-2.50 deep min. on Motor to Gearhead Height (5.00) Lead Exit XH Gearhead Type G, page 11 Product Type Weight XH Diameter cc y Only the first four characters of the product type are relevant to dimensions Lead/ord (in.) 48R-G 48R6-G No G 427-G Yes 24 Lead Exit ccessory (on Select Models) D Lead Exit Motor Diameter Key KEY (1.09) 3.70 (5.75) (6.81) [4] 5/16-18 UN X.50 MIN. DEEP XH (.905) 3.24±.03 [4] 7/16-14 UN-2 THRU TLOG S-17a.3 37

16 Standard products for demanding applications Gearmotors odine offers a complete line of right angle, parallel shaft, and hollow shaft gearmotors with torque ratings from 6-1,000 lb-in. ( Nm). ll gearmotors are available as fixed-speed, variable-speed, permanent magnet, and brushless D models. pages 4-17 (metric 29-33) INTEGRmotors odine s unique INTEGRmotor combines a motion control, a brushless D motor and a gearhead in one compact package. They provide simplified wiring, reduced panel space, faster assembly times and lower system costs. ontrols Our motion controls are precisely engineered to provide maximum performance from our motors and gearmotors. page odine designs and manufactures a complete line of permanent magnet D controls for 90/130V PMD motors, and brushless D controls for 24V and 130VD motors. We also offer 3-phase inverter controls. etorq odine s high performance, high torque direct drive system is ideal for applications that demand high efficiency, very compact design and enclosed construction. page 23 Presented by: bodine-electric.com 201 Northfield Road Northfield, IL U.S.. Tel: Fax: Toll Free: info@bodine-electric.com ISO 9001:2008 MNGEMENT MNGEMENT QULITY ERTIFIED SYSTEM RoHS OMPLINT opyright 2016 odine Electric ompany. ll rights reserved.