U37X SERIES Engineering Bulletin Mar 2013

Transcription

1 EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 15,000 Hours Lifetime at 85 Up to 175,000 Hours Useful Life he series is the longest life version of the U37 grade series and is specifically designed to provide the ripple current capability and long life required for high reliability inverter applications. he has an endurance rating of 15,000 hours at 85 with the rated ripple current applied. he useful life can exceed 175,000 hours at 40 and 2.1x the ripple current. hese capacitors are available in a variety of high current English or Metric thread terminals. Mounting options include a three-footed clamp or bottom threaded stud. ustom designs are also available. ummary of pecifications crew terminals: high and low post, English and Metric thread. apacitance range: 1,0 to 18,000µF. Voltage range: 350 to 500VD. ategory temperature range: 40 to 85. Leakage current: 0.02V(µA) or 5mA, whichever is smaller, after 5 minutes at. tandard capacitance tolerance: % Nominal case size (D L): D = 50mm (2.000 ) to 89mm (3.500 ); L = 92mm (3.6 ) to 219mm (8.6 ). ated lifetime: 15,000 hours at 85 with rated ripple current applied. United hemi-on, Inc W. Higgins oad, osemont, IL el Fax / 7

2 pecifications - crew erminals Item ategory emperature ange 40 to 85 ated Voltage ange 350 to 500VD apacitance ange 1,0 to 18,000 F at, 1Hz apacitance olerance % (M) at, 1Hz haracteristics Leakage urrent I 0.02V ( A) or 5mA, whichever is smaller, after 5 minutes at. Where I = Max. leakage current ( A), = Nominal capacitance ( F) and V= ated voltage (V) ated ipple urrent Multipliers Ambient emperature ( ) Frequency (Hz) Endurance (Load Life) Useful Life D ated Voltage V 50Hz Hz Hz 1. 1kHz 1. 3kHz kHz 1.41 o determine maximum ripple current at a specified temperature and frequency, use the appropriate multiplier shown. However, do not use both the temperature and frequency multipliers together. he following specifications shall be satisfied when the capacitors are restored to after subjecting them to D voltage for 15,000 hours at 85 with the rated ripple current applied. he sum of the D voltage and peak A voltage must not exceed the full rated voltage of the capacitors. apacitance change: % from initial measurement E change : 0% of initial specified limit Leakage current : initial specified limit With specified standard voltage and ripple current applied, typical life as function of ambient temperature is listed below ,000 hours max. 71,600 hours max. 175,000 hours max. apacitance change: % from initial measurement E change : 0% of initial specified limit Leakage current : initial specified limit helf Life Vibration ating Maximum ightening orque ypical Inductance (nh) at 1MHz he following specifications shall be satisfied when the capacitors are restored to after exposing them for 500 hours at 85 without voltage applied. he rated voltage shall be applied to the capacitors for a minimum of minutes, at least 24 hours and not more than 48 hours before the measurements. apacitance change: % from initial measurement E change : 0% of initial specified limit Leakage current : initial specified limit 10-55Hz, 10g sinusoidal in three axes, 2 hours per axis. erminal hread ize 3 hreads Engaged 6 hreads Engaged ase Diameter (mm) Ø50.8 Ø63.5 Ø76.2 Ø89.0 HP HP HL D P H A NF-2B M5x0.8-6H 1 /4-28 NF-2B M6x1-6H 2.0 N m (18.0 in lb) 4.0 N m (35.0 in lb) 2.8 N m (.0 in lb) 6.2 N m (55.0 in lb) erminal HL D P H A ustom Designs ustom V values per case size and termination type may be available upon request. ontact appropriate representative with specific requirements. Product specifications are subject to change without notice. Ask for U product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins. 2/7 United hemi-on, Inc W. Higgins oad, osemont, IL el Fax

3 Useful Life Useful Life:,000 Hours at 85 he life expectancy of a capacitor is shown as a function of ambient temperature and ripple current load Ir/Ir (rated) ratio ,000 hrs ,000 hrs 100,000 hrs 50,000 hrs Ambient temperature ( ) Diagram of Dimensions - crew erminals Large an/crew erminals Unit: mm (inches) ase Dimensions and tandard Box Quantities ase ize 2.0 (0.080) L F 0. (0.010) tandard Box Quantity B7 D0 117 (4.6) 1 (5.1) 22.2 (0.875) 49 F Vent D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 E1 EM (2.500) 76.2 (3.000) 92 (3.6) 105 (4.1) 117 (4.6) 1 (5.1) 143 (5.6) 0092 (3.6) 105 (4.1) 117 (4.6) 143 (5.6) 181 (7.1) 219 (8.6) 28.6 (1.1) 31.8 (1.0) Black Insulating leeve (see note) D L H Insulating End Disk F92 FA5 FB7 FE3 FF5 FK0 FM (3.500) 92 (3.6) 105 (4.1) 117 (4.6) 143 (5.6) 155 (6.1) 190 (7.500) 219 (8.6) 31.8 (1.0) Note: In some cases, the color of the sleeve may change slightly due to the operating conditions, however, the discoloration will not impair capacitor function. 05 erminal pecifications erminal Available ase Diameter mm (inches) hread ize Minimum hread Depth 0.5 (0.0) H 2.0 (0.080) Ø 0. (0.010) Ø 0. (0.010) HP HL D P H A D E ( ) NF-2B M5x0.8-6H M5x0.8-6H 1 /4-28 NF-2B 1 /4-28 NF-2B M6x1-6H M6x1-6H 9.5 (0.375) 09.5 (0.375) 08.5 (0.335) 08.7 (0.344) 11.9 (0.468) 08.7 (0.344) 11.9 (0.468) 6.4 (0.0) 6.4 (0.0) 5.0 (0.0) 2.4 (0.093) 6.4 (0.0) 2.4 (0.093) 6.4 (0.0) 08.0 (0.313) 8.0 (0.313) 13.0 (0.512) 11.1 (0.438) 11.1 (0.438) 18.8 (0.740) Mounting Hardware is optional. efer to hardware specifications on the following page. United hemi-on, Inc W. Higgins oad, osemont, IL el Fax /7

4 Mounting Hardware - crew erminals ype : hree-footed lamp Unit: mm (inches) 45 5 D 15 A B G K (2 holes) ( ) lamp: Zinc with silver trivalent chromate post treatment. Hardware: crew, washer and hexagon nut included with each clamp. ype : lamp Dimensions Mounting ase 63.5 (2.500) 76.2 (3.000) 89.0 (3.500) A 31.8 (1.0) 38.1 (1.500) 44.5 (1.750) B 36.5 (1.437) 42.9 (1.689) 49.2 (1.937) 56.5 (2.224) G 13.3 (0.524) 13.3 (0.524) 13.3 (0.524) 16.0 (0.6) 0.5 (0.0) K 0.5 (0.0) 7.1 (0.280) 7.1 (0.280) 7.1 (0.280) 8.0 (0.313) 19.1 (0.751) 19.1 (0.751) 19.1 (0.751) 21.0 (0.827) 9.5 (0.374) 9.5 (0.374) 9.5 (0.374) 9.0 (0.354) 0.5 (0.0) 0.8 (0.032) 0.8 (0.032) 1.0 (0.040) 1.0 (0.040) ype : tud Mounting D P M K N Q Insulated Plastic Hex Nut Mounting Nut - Order eparately he insulated plastic mounting nut is not included with stud mount capacitor orders. It must be ordered separately. ee available part numbers below. ype : tud Dimensions Mounting Nut Dimensions Mounting P hread ize Part Number ØK 2.0 (0.080) M N ØQ 16.0 (0.6) M D.0 (1.181) 19.0 (0.748) 18.0 (0.709) 22.0 (0.866) 1.40 (0.055) 50-8E 38.0 (1.496) 19.0 (0.748) 18.0 (0.709).0 (1.181) 1.40 (0.055) 4/7 United hemi-on, Inc W. Higgins oad, osemont, IL el Fax

5 Part Numbering ystem for eries When ordering, always specify complete 18-field global part number. 18 Fields E 3 7 X PN M E A 5 M upplement. Field 18. = PE insulation with end disk (Ø50.8mm only). M = Pb-free PV insulation with end disk. = Polyolefin insulation with end disk. ase ize. Fields 15, 16 and 17. he single letter diameter code is inserted in field 15. = Ø50.8mm (Ø2.000 ) D = Ø63.5mm (Ø2.500 ) E = Ø76.2mm (Ø3.000 ) F = Ø89.0mm (Ø3.500 ) he double character length code is inserted in fields 16 and 17. For lengths 99mm, insert the actual length rounded to nearest millimeter. For lengths of 100mm or more, insert the appropriate alpha numeric code as indicated below. 92 = 92mm (3.6 ) A5 = 105mm (4.1 ) B7 = 117mm (4.6 ) D0 = 1mm (5.1 ) E3 = 143mm (5.6 ) F5 = 155mm (6.1 ) 1 = 181mm (7.1 ) K0 = 190mm (7.500 ) M9 = 219mm (8.6 ) apacitance olerance. Field 14. M= % apacitance. Fields 11, 12 and 13. Expressed in Microfarads. he first two digits are significant figures inserted in fields 11 and 12, and the third digit inserted in field 13 indicates the number of zeros for capacitance of 10 F or more. indicates the decimal point for capacitance less than 10 F (e.g. 47= 4.7 F; 470 = 47 F; 471= 470 F; 472 = 4,700 F; 473 = 47,000 F). Mounting Hardware. Field 10. N = None. = hree-footed clamp. = tud mount. he mounting nut is not included with stud mount orders. It must be ordered separately. erminal ype. Fields 8 and 9. HP = High post NF-2B screw thread. HL = High post M5x0.8 screw thread. D = UE M5x0.8 screw thread. P = Low post 1 /4-28 NF-2B screw thread. H = High post 1 /4-28 NF-2B screw thread. A = Low post M6x1 screw thread. = High post M6x1 screw thread. D ated Voltage. Fields 5, 6 and 7. Expressed in Volts. he first two digits are significant figures inserted in fields 5 and 6, and the third digit inserted in field 7 indicates the number of zeros for rated voltage of 10VD or more. indicates the decimal point for rated voltage less than 10VD (e.g. 40 = 4.0VD; 400 = 40VD; 401 = 400VD). eries Name. Fields 2, 3 and 4. Enter the 3-letter/digit series name in fields 2, 3 and 4. If the series name is only 2 letters/digits, place a dash in field 4. For a series name with more than 3 letters/digits, refer to the individual series for the appropriate 3-field series name. apacitor ype. Field 1. Aluminum Electrolytic apacitor (Polar). United hemi-on, Inc W. Higgins oad, osemont, IL el Fax /7

6 tandard Voltage atings - crew erminals ated Voltage (WVD) apacitance (µf) Global Part Number Nominal ase ize* D L (mm) ase ize Maximum E (mω) at,1hz ated ipple urrent (A rms) at 85 1Hz 0Hz >3kHz 350 Volts 400 Volts urge 2,700 E37X351HPN272MB7M B ,0 E37X351HPN332MD0M 50 1 D ,700 E37X351PN272MD92M D ,0 E37X351PN332MDA5M DA ,900 E37X351PN392MDB7M DB ,700 E37X351PN472MDD0M DD ,700 E37X351PN472MDE3M DE ,900 E37X351PN392ME92M E ,700 E37X351PN472MEA5M EA ,600 E37X351PN562MEB7M EB ,0 E37X351PN822MEE3M EE ,000 E37X351PN103ME1M E ,000 E37X351PN123MEM9M EM ,600 E37X351PN562MF92M F ,800 E37X351PN682MFA5M FA ,0 E37X351PN822MFB7M FB ,000 E37X351PN123MFE3M FE ,000 E37X351PN123MFF5M FF ,000 E37X351PN153MFK0M FK ,000 E37X351PN183MFM9M FM Volts 450 Volts urge 4 Volts 470 Volts urge 2,700 E37X401HPN272MB7M B ,700 E37X401HPN272MD0M 50 1 D ,700 E37X401PN272MD92M D ,700 E37X401PN272MDA5M DA ,0 E37X401PN332MDB7M DB ,900 E37X401PN392MDD0M DD ,900 E37X401PN392MDE3M DE ,900 E37X401PN392ME92M E ,700 E37X401PN472MEA5M EA ,600 E37X401PN562MEB7M EB ,800 E37X401PN682MEE3M EE ,0 E37X401PN822ME1M E ,000 E37X401PN123MEM9M EM ,600 E37X401PN562MF92M F ,800 E37X401PN682MFA5M FA ,800 E37X401PN682MFB7M FB ,000 E37X401PN103MFE3M FE ,000 E37X401PN103MFF5M FF ,000 E37X401PN123MFK0M FK ,000 E37X401PN153MFM9M FM ,0 E37X421HPN222MB7M B ,700 E37X421HPN272MD0M 50 1 D ,0 E37X421PN222MD92M D ,700 E37X421PN272MDA5M DA ,0 E37X421PN332MDB7M DB ,900 E37X421PN392MDD0M DD ,900 E37X421PN392MDE3M DE ,0 E37X421PN332ME92M E ,900 E37X421PN392MEA5M EA ,700 E37X421PN472MEB7M EB ,600 E37X421PN562MEE3M EE ,0 E37X421PN822ME1M E ,000 E37X421PN103MEM9M EM ,700 E37X421PN472MF92M F ,600 E37X421PN562MFA5M FA For terminal, mounting and construction options, refer to the part numbering system for descriptions and codes. * efer to diagram of dimensions for detailed case size specifications. Product specifications are subject to change without notice. Ask for U product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins. 6/7 United hemi-on, Inc W. Higgins oad, osemont, IL el Fax

7 tandard Voltage atings - crew erminals ated Voltage (WVD) apacitance (µf) Global Part Number Nominal ase ize* D L (mm) ase ize Maximum E (mω) at,1hz ated ipple urrent (A rms) at 85 1Hz 0Hz >3kHz 4 Volts 470 Volts urge 450 Volts 500 Volts urge 6,800 E37X421PN682MFB7M FB ,0 E37X421PN822MFE3M FE ,000 E37X421PN103MFF5M FF ,000 E37X421PN123MFK0M FK ,000 E37X421PN153MFM9M FM ,800 E37X451HPN182MB7M B ,0 E37X451HPN222MD0M 50 1 D ,0 E37X451PN222MD92M D ,0 E37X451PN222MDA5M DA ,700 E37X451PN272MDB7M DB ,0 E37X451PN332MDD0M DD ,900 E37X451PN392MDE3M DE ,0 E37X451PN332ME92M E ,900 E37X451PN392MEA5M EA ,900 E37X451PN392MEB7M EB ,600 E37X451PN562MEE3M EE ,800 E37X451PN682ME1M E ,0 E37X451PN822MEM9M EM ,900 E37X451PN392MF92M F ,700 E37X451PN472MFA5M FA ,600 E37X451PN562MFB7M FB ,0 E37X451PN822MFE3M FE ,0 E37X451PN822MFF5M FF ,000 E37X451PN103MFK0M FK ,000 E37X451PN123MFM9M FM Volts 550 Volts urge 1,0 E37X501HPN122MB7M B ,500 E37X501HPN152MD0M 50 1 D ,500 E37X501PN152MD92M D ,800 E37X501PN182MDA5M DA ,0 E37X501PN222MDB7M DB ,700 E37X501PN272MDD0M DD ,700 E37X501PN272MDE3M DE ,0 E37X501PN222ME92M E ,700 E37X501PN272MEA5M EA ,0 E37X501PN332MEB7M EB ,900 E37X501PN392MEE3M EE ,600 E37X501PN562ME1M E ,800 E37X501PN682MEM9M EM ,0 E37X501PN332MF92M F ,900 E37X501PN392MFA5M FA ,700 E37X501PN472MFB7M FB ,600 E37X501PN562MFE3M FE ,800 E37X501PN682MFF5M FF ,0 E37X501PN822MFK0M FK ,000 E37X501PN103MFM9M FM For terminal, mounting and construction options, refer to the part numbering system for descriptions and codes. * efer to diagram of dimensions for detailed case size specifications. Product specifications are subject to change without notice. Ask for U product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins. United hemi-on, Inc W. Higgins oad, osemont, IL el Fax / 7