CB Series Tantalum Capacitors
|
|
- Estella Johnson
- 6 years ago
- Views:
Transcription
1 Series Features: Lead-Free. Specially designed of general purpose. Highly reliable resin dipped type. xcellent frequency and temperature characteristics. Non-flammable epoxy resin. Specifications: Item Operating temperature range Rated working voltage range Performance haracteristics -55 to +125 (>85 with rated voltage derating) 6.3 to 50V dc Nominal capacitance range 0.1 to 300µF apacitance tolerance Leakage current ±20% (±10% is available) (120Hz, +20 ) Not more than 0.008V (µ) or 0.5µ whichever is greater Tan δ (120Hz, +20 ) Working voltage 6.3 to 50V apacitance 1.0µF 1.5 to 6.8µF 10 to 68µF 100µF tan δ haracteristics at high and low temperature -55 apacitance change ±12% of initial measured value at +20 Leakage current 10% of initial measured value +105 apacitance change ±12% of initial measured value at +20 Test conditions Moisture resistance Relative humidity : 90 to 95% without load mbient temperature : +40 uration : 500 hours Post test requirements at +20 Leakage current : 0.012V or 0.75 (µf), whichever is greater apacitance change : ±10% of initial measured value Tan δ : 150% of initial specified value Page <1> 03/03/11 V1.1
2 Series Specifications: Item Test conditions Performance haracteristics ndurance Item onditions erating (for 10 to 50V only) erating voltage +105 for 10 to 50V working Rating uration 1000 hours 1000 hours mbient temperature pplied voltage erated working voltage Rated working voltage Source impedance 1Ω/V 1Ω/V Working Voltage (V dc) erating Voltage (V dc) Post test requirements at +20 Leakage current apacitance change Tan δ Test onditions : 0.01% V or (µ), whichever is greater : ±10% of initial measured value : Initial specified value Shelf life uration : 1000 hours mbient temperature : +85 pplied voltage : (none) Post test requirements at +20 Same limits for ndurance Tantalum electrolytic capacitors resin dipped type Tantalum capacitor dipped type outline drawings imensions : Millimetres Page <2> 03/03/11 V1.1
3 Series imensions Table () F Formats 1/2 H Wire Length (L) 5,7 ±1 12, 14 ±1 18, 20 ±1 imensions in Millimetres ode Rated Voltage, apacitance of apacitors VR (V) ode 0J V 1H apacitance (µf) 0.10 (104) (154) (224) (334) (474) (684) (105) (155) (225) (335) 4.7 (475) (685) 10 (106) 15 (156) 22 (226) F Page <3> 03/03/11 V1.1
4 Series Rated voltage, capacitance of capacitors VR (V) ode 0J V 1H apacitance (µf) 33 (336) - F 47 (476) - 68 (686) - - F 100 (107) (157) F (227) F Ratings apacitance µf L (µ) F % SR (Ω) at 100kHz 6.3 Volt at 85 (4 Volt, at 125 ) J475#### J685#### J106#### J156#### J226#### J336#### J476#### J686#### J107#### J157#### J227#### 10 Volt at 85 (6.3 Volt, at 125 ) #### #### #### #### #### Page <4> 03/03/11 V1.1
5 Series Ratings apacitance µf L (µ) 10 Volt at 85 (6.3 Volt, at 125 ) F % SR (Ω) at 100kHz #### #### #### #### #### 0.8 F ##F## 16 Volt at 85 (10 Volt, at 125 ) #### #### #### #### #### #### #### #### #### #### #### 10 F ##F## 25 Volt at 85 (16 Volt, at 125 ) F #### #### #### #### #### #### #### #### #### #### #### ##F## ##F## Page <5> 03/03/11 V1.1
6 Series Ratings apacitance µf L (µ) 35 Volt at 85 (23 Volt, at 125 ) 0.1 F % SR (Ω) at 100kHz V104#### V154#### V224#### V334#### V474#### V684#### V105#### V155#### V225#### V335#### V475#### F V685#### V106#### V156#### V226#### V336##F## V476##F## 50 Volt at 85 (33 Volt, at 125 ) H104#### H224#### H334#### H474#### H684#### H105#### H155#### H225#### H335#### H475#### H685#### H106#### Note: ll # # # # to ambient temperature of +20 measured at 120Hz, 0.5V rms unless otherwise stated insert capacitance tolerance : K for ±10% and M for ±20% insert format 1 for pitch 2.54mm; format 2. for pitch 5.08mm insert wire length see page 8. insert bulk : ode or mmo pack : ode T. Page <6> 03/03/11 V1.1
7 Series Packaging of bead tantalum capacitors explanation of part numbers OJ 475 M I &T Series ode Rated Voltage Quantity per bag: ode. The capacity of the plastic bags depends on. Nominal apacitance apacitance Tolerance Format & Lead Space Size ode Wire Length ulk & mmo Pack Format (1) Qty per bag (cut 7mm) Form to 1000 Form to 1000 Form to F 500 Format (1) Tape and mmo Packing (conform to: I286-2) ode T. Tape and ammo packing (conform to: I286-2) Qty per bag (cut 14mm) Form to 1000 Form to 500 Form to F 500 Format (2) Qty per bag (cut 7mm) Form to 1000 Form to 500 Form to F 500 Item ode imension (mm) arrier tape width W Hold down tape width W ±0.5 Hold down tape position W maximum Feed hole diameter 4.0 ±0.2 Feed hole pitch P 12.7 ±0.3 Format 2 Hole centre to lead P 1 Format 1: 5.05 ±0.7 Format 2: 3.85 ±0.7 Hole centre to component centre P 6.35 ±1.0 Lead wire clench height H 16 ±0.5 Hole position H ±0.5 ase of component height H minimum omponent height H maximum omponent alignment P 0 ±1.3 h 0 ±2.0 Format 1 Lead spacing S Lead diameter d 0.5 ±0.05 Length of snipped lead L 11.0 maximum arrier tape thickness T 0.5 ±0.1 ase ode to to to F Qty. (PS/box) Page <7> 03/03/11 V1.1
8 Series Table escription PITOR, 4.7µF, 6.3V PITOR, 6.8µF, 6.3V PITOR, 10µF, 6.3V PITOR, 15µF, 6.3V PITOR, 22µF, 6.3V PITOR, 33µF, 6.3V PITOR, 47µF, 6.3V PITOR, 68µF, 6.3V PITOR, 100µF, 6.3V PITOR, 150µF, 6.3V PITOR, 220µF, 6.3V PITOR, 4.7µF, 10V PITOR, 6.8µF, 10V PITOR, 10µF, 10V PITOR, 15µF, 10V PITOR, 22µF, 10V PITOR, 33µF, 10V PITOR, 47µF, 10V PITOR, 68µF, 10V PITOR, 100µF, 10V PITOR, 150µF, 10V PITOR, 220µF, 10V PITOR, 2.2µF, 16V PITOR, 3.3µF, 16V PITOR, 4.7µF, 16V PITOR, 6.8µF, 16V PITOR, 10µF, 16V PITOR, 15µF, 16V PITOR, 22µF, 16V PITOR, 33µF, 16V PITOR, 47µF, 16V PITOR, 68µF, 16V PITOR, 100µF, 16V 0J475M2 0J685M2 0J106M2 0J156M2 0J226M2 0J336M2 0J476M2 0J686M2 0J107M2 0J157M2 0J227M2 1475M2 1685M2 1106M2 1156M2 1226M2 1336M2 1476M2 1686M2 1107M2 1157M2 1227M2F 1225M2 1335M2 1475M2 1685M2 1106M2 1156M2 1226M2 1336M2 1476M2 1686M2 1107M2 Page <8> 03/03/11 V1.1
9 Series Table escription PITOR, 150µF, 16V PITOR, 1µF, 25V PITOR, 1.5µF, 25V PITOR, 2.2µF, 25V PITOR, 3.3µF, 25V PITOR, 4.7µF, 25V PITOR, 6.8µF, 25V PITOR, 10µF, 25V PITOR, 15µF, 25V PITOR, 22µF, 25V PITOR, 33µF, 25V PITOR, 47µF, 25V PITOR, 68µF, 25V PITOR, 100µF, 25V PITOR, 0.1µF, 35V PITOR, 0.15µF, 35V PITOR, 0.22µF, 35V PITOR, 0.33µF, 35V PITOR, 0.47µF, 35V PITOR, 0.68µF, 35V PITOR, 1µF, 35V PITOR, 1.5µF, 35V PITOR, 2.2µF, 35V PITOR, 3.3µF, 35V PITOR, 4.7µF, 35V PITOR, 6.8µF, 35V PITOR, 10µF, 35V PITOR, 15µF, 35V PITOR, 22µF, 35V PITOR, 33µF, 35V PITOR, 47µF, 35V PITOR, 0.1µF, 50V PITOR, 0.22µF, 50V 1157M2F 1105M2 1155M2 1225M2 1335M2 1475M2 1685M2 1106M2 1156M2 1226M2 1336M2 1476M2 1686M2F 1107M2F 1V104M2 1V154M2 1V224M2 1V334M2 1V474M2 1V684M2 1V105M2 1V155M2 1V225M2 1V335M2 1V475M2 1V685M2 1V106M2 1V156M2 1V226M2 1V336M2F 1V476M2F 1H104M2 1H224N2 Page <9> 03/03/11 V1.1
10 Series Table escription PITOR, 0.33µF, 50V PITOR, 0.47µF, 50V PITOR, 0.68µF, 50V PITOR, 1µF, 50V PITOR, 1.5µF, 50V PITOR, 2.2µF, 50V PITOR, 3.3µF, 50V PITOR, 4.7µF, 50V PITOR, 6.8µF, 50V PITOR, 10µF, 50V 1H334M2 1H474M2 1H684M2 1H105M2 1H155M2 1H225M2 1H335M2 1H475M2 1H685M2 1H106M2 isclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SP Multicomp is the registered trademark of the Group. Premier Farnell plc Page <10> 03/03/11 V1.1
MC 5% Series. Construction. Power Rating and Dimension. Features: Page <1> 07/04/12 V1.1. Dimension. Width (W) ± Series. Height (H) ±0.
Construction Power Rating and Dimension Series Length (L) ±0.1 Width (W) ±0.15-0.1 Dimension Height (H) ±0.05 Length (L1) ±0.1 Length (L2) ±0.1 MC 0603 1.6 ±0.1 0.8 0.45 0.3 0.3 MC 0805 2 ±0.15 1.25 0.4
More informationMulti Layer Ceramic Capacitor
Features: : A wide selection of sizes is available (0201 to 0603 sizes) High capacitance in given case size Capacitor with lead-free termination (pure Tin) Applications: For general digital circuit For
More informationGBPC15,25,35- Series. Features: Page <1> 10/08/10 V1.1
Features: Plastic material. Integrally moulded heatsink provide very low thermal resistance for maximum heat dissipation. Surge overload ratings from 300 to 400 amperes. Terminals solderable per MIL-STD-202,
More informationFast Acting Fuse SMD Thin Film
Electrical Specifications Operating temperature : -55 C to +25 C Current carrying capacity : For MCF0402E and MCF0603E at -55 C 7% of rating, at -25 C 0% of rating, at +25 C 80% of rating For MCF0603C
More informationPushbutton Switches Sub-Miniature
Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing
More informationFestoon Series. Features: Applications: Festoon 37 mm, 3 LEDs. Specifications: Festoon 37 mm, 6 LEDs. Page <1> 26/03/12 V1.1
Features: High brightness, small size Long life span : >5,000 hours Environment friendly No mercury or other materials No UV, IR Energy-saving, environment friendly Applications: Reading lights (Automotive,
More informationMC 1% Series Thick Film Chip Resistors
Features: Small size and light weight. Suitable for both flow and re-flow soldering. Reduction of assembly costs and matching with placement machines. Performance Specifications: Temperature coefficient
More informationSwitchgear Wires. Specifications: Page <1> 21/12/11 V1.1. Description : 16 mm 2 flex plain copper, PVC insulated, 600 / 1,000 V, type BK, BS 6231
Description : 16 mm 2 flex plain copper, PVC insulated, 600 / 1,000 V, type BK, BS 6231 Conductors* : 16 mm 2 (approximate 126 / 0.4 mm) plain annealed copper bunch meeting the requirements of BS 6360,
More informationHigh Power Chip Resistor
Description: The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top
More informationAutomotive and Anti-Sulfuration Chip Resistor 0603
The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the
More informationSurface Mount Thick Film Resistor MCWR Series
Description The lead free resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a lead free resistive paste that is
More informationThick Film Chip Resistors
Thick Film Chip Resistors Features: Small size and light weight. Suitable for both flow and reflow soldering. Reduction of assembly costs and matching with placement machines. Performance Specifications:
More informationFG Series, 230V ac Toroidal Single Primary Transformers
A high quality range of open style toroidal transformers with flying leads. Featuring a single primary winding rated at 230V 50/60Hz, and dual secondary windings. Secondary windings can be connected in
More informationHigh Voltage Thick Film Chip Resistor MCHVR Series
eatures Highly reliable multilayer electrode construction Higher component and equipment reliability xcellent performance at high voltage Reduced size of final equipment pplications Inverter Outdoor quipments
More informationWire Wound Chip Inductor Ferrite
Applications: Features: Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate dimensions, can be mounted automatically Terminals are highly resistant to pull forces
More informationThick Film Chip Resistors
Description: The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface
More information1 Moulded resin 2 Electrode (Ag) 3 Ferrite core 4 Magnet wire
Features: Very strong solderability by flow soldering, soldering iron or wave soldering. Highly accurate dimensions, can be mounted automatically. Terminals are highly resistant to pull forces. Highly
More informationStepper Motor Drive. Description: Specifications:
Description: The GSM4, together with the optional PSU4 power supply, provides a comprehensive facility for controlling 4 or 8 wire Bipolar driven stepper motors. Up to 4 GSM4 cards can be daisy-chained
More informationSlimline Axial Flow Fans 80mm 92mm 119mm
80mm, 119mm Features: Low cost, low noise, high pressure fans. Sleeve bearings. Rated plastic impellers. Supplied with 300mm, 22AWG lead wire. 80mm, 92mm, 119mm Slimline Features: Low cost slimline AC
More informationThick Film Low Ohm Chip Resistors
Description: The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top
More informationType Number Symbol Value Units
Features: Zener voltage range.0 to 7 volts. Mini-MELF package. Surface device type mounting. Hermetically sealed glass. Compression Bonded Construction. All external surfaces are corrosion resistant and
More informationPrototyping and Soldering Kit UK
Protyping and Soldering Kit The protyping and soldering kit - are listed below: 1. ESD Digital Soldering Station Apply Manufacturing production line On field soldering jobs Lead-free solder ESD safe -
More informationMains Flex Oval/Round 2-3 Core
2 Core 3 Core Features: Flexible mains cable for internal use in the direct connection of equipment to mains power supplies. PVC insulated and sheathed flexible mains cords. Standard core colours : Brown
More informationBlade Fuses - Illuminated Mini Blade
Photo Fuse Features: The photo fuse is designed for the automobile and electrical industry. It has become the original equipment circuit protection standard for automobiles, trucks and low power system.
More informationRated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
More informationResin-Coated, Radial-Leaded Solid Tantalum Capacitors
FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*
More informationDigital-Control and Programmable DC Power Supply Models: , , , & User Manual
Digital-Control and Programmable DC Power Supply Models: 72-2535, 72-2540, 72-2545, 72-2550 & 72-10480 User Manual Page 19/05/16 V1.0 Safety Symbols This chapter contains important safety instructions
More informationDATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents
DATA SHEET Supersedes data of 18th January 2000 File under BCcomponents, BC01 2000 Apr 07 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case,
More informationAluminum Capacitors Power High Ripple Current Screw Terminals
101/102 PHR-ST Aluminum Capacitors FEATURES ST STB Fig.1 Component outline Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated with a blue
More informationType AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) ELECTRICAL SPECIFICATIONS NON-MAGNETIC C0G (NP0) GENERAL SPECIFICATION Note Electrical characteristics at
More informationCeramic disc capacitors (kinked leads) Class 2, low loss (0.2% max.) 500 V; 1 kv; 2 kv; 3 kv
FEATURES High reliability Low losses High capacitance in small size Kinked leads. APPLICATIONS In electronic circuits where low losses and high capacitance per volume are essential, for example: SMPS HF
More informationSurface Mount Aluminum Electrolytic Capacitors NACZF Series
FETURES YLINRIL LELESS TYPE FOR SURFE MOUNTING HIGH PITNE VLUES (UP TO 6800µF) LO IMPENE/HIGH RIPPLE URRENT T 100KHz 12.5mm x 17mm ~ 18mm x 22mm SE SIZES IE TERMINTION STYLE FOR HIGH VIRTION.PPLITIONS
More informationAluminum Electrolytic Capacitors Radial Very Low Impedance
Aluminum Electrolytic Capacitors Radial Very Low Impedance FEATURES Very low impedance and low ESR Very long useful life: 4000 h to 0 000 h at 05 C, very high reliability Excellent ripple current capability
More information55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A
Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:
More informationAluminum Electrolytic Capacitors Radial Standard Ultra Miniature
Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, insulated with a blue
More informationhandbook, halfpage lower RLL 116
FEATURES Polarized aluminium electrolytic capacitors, non-solid Radial leads, cylindrical aluminium case with pressure relief, insulated with a blue vinyl sleeve Charge and discharge proof Long useful
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering) FEATURES Manufactured with non-magnetic materials Safety screened for magnetic properties C0G (NP0)
More informationType AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
More informationMiniature Aluminum Electrolytic Ca pac i tors
ULTRA LOW IMPEDANCE, RADIAL LEADS, POLARIZED, ALUMINUM ELEC TRO LYT IC FEATURES VERY LOW IMPEDANCE LONG LIFE AT 105 C (1000 ~ 5000 hrs.) HIGH STABILITY AT LOW TEMPERATURE IDEALLY FOR SWITCHING POWER SUPPLIES
More informationSurface Mount Aluminum Electrolytic Capacitors
FETURES YLINRIL V-HIP ONSTRUTION LONG LIFE (7,000 ~ 10,000 HOURS) IE TEMPERTURE RNGE (-25 ~ +105 ) ESIGNE FOR REFLO SOLERING RoHS ompliant includes all homogeneous materials *See Part Number System for
More informationKMG Series. Miniature General Purpose Solvent Proof 105 C Maximum Temperature
Miniature General Purpose Solvent Proof 5 C Temperature The series capacitors are designed for general purpose use with an operating temperature range for most of these capacitors from 55 C to 5 C. The
More informationSummary of Specifications
Miniature General Purpose Solvent Proof Large and Small 85 C Temperature Actual Size The series capacitors are a miniaturized version of the SME series. These capacitors are designed for a load life of,000
More informationLow ESR and High Frequency Radial Electrolytic Capacitor. TZE Series. Features. Applications. Dimensions (in mm)
Low ESR and High Frequency Radial Electrolytic Capacitor Low ESR and High Frequency Radial Electrolytic Capacitor Features Radial leads, cylindrical aluminum case Low impedance and high frequency High
More informationStandard and Low Profile Tantalum Microchip Capacitors. STANDARD CASE DIMENSIONS: millimeters (inches)
FEATURES The world s smallest surface mount tantalum capacitor CV range: 0.10-150μF / 2-25V 11 case sizes available, standard and low profile APPLICATIONS Hearing Aids, Non-life support medical, Long life
More informationType SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type
Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES YLINDRIAL V-HIP ONSTRUTION FOR SURFAE MOUNTING AVAILALE WITH ANTI-VIRATION WIDE TERMINATIONS VERY LOW IMPEDANE & HIGH RIPPLE URRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105 ) SUITALE
More informationAluminum Capacitors Standard - 85 C Snap-In
Aluminum Capacitors Standard - 85 C Snap-In FEATURES Useful life: 2000 h at +85 C Polarized aluminum electrolytic capacitors Small dimension High C x U product Material categorization: for definitions
More informationAluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In
Aluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In FEATURES Useful life: 2000 h at 105 C Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, miniaturized
More informationSection 3: Introduction. Dipped Radial Capacitors. Foreword SOLID TANTALUM RESIN DIPPED SERIES TAP/TEP
ection 3: Introuction Forewor AVX offers a broa line of soli Tantalum capacitors in a wie range of sizes, styles, an ratings to meet any esign nees. This catalog combines into one source AVX s leae tantalum
More informationContents CORNELL DUBILIER
Contents Products Listed by Type Designation........................................................ Chip and SMT Selector Guide................................................................... 1.001
More informationAluminum Capacitors, Power High Ripple Current, Screw Terminals
Aluminum Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic capacitors,
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a
More information-40 to C 6.3 to 50 V.DC 22 to 6800 µ F ±20 % (120Hz/+20 C) I < 0.01 CV (µa) after 2 minutes application of rated working voltage at +20 C
Radial Type Series: FM Type :A n Features Low impedance(40 to 70% less than FC Series) Endurance : 2000 to 7000 hours at +105 C Country of Origin Japan Malaysia China n s Category temp. range Rated W.V.
More informationAC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type
www.vishay.com AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES Low loss dielectric Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationFilm Capacitors. Metallized Polyester Film Capacitors (MKT) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32591... B32594 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto
More informationCONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice. 1. Features Ultra Low & high ripple
More informationAluminum Capacitors Power Ultra Long Life Snap-In
059 PLL-SI QUICK REFERENCE DATA DESCRIPTION Nominal case size (Ø D x L in mm) Fig.1 Component outlines 159 miniaturized 85 C PUL-SI VALUE 22 x 25 to 35 x 60 157 PUM-SI Rated capacitance range (E6/E12 series),
More informationRadial Aluminium Electrolytic Capacitors 105 C
Radial Aluminium Electrolytic Capacitors 105 C Standard, miniaturized, Endurance 1.000h to 2.500h at 105 C Rated voltage range: 6,3V to 100V, Rated capacitance range: 0,47µF to 12.000µF range: Ø 5,5 x
More informationSurface Mount Aluminum Electrolytic Capacitors
FETURES YLINRIL V-HIP ONSTRUTION FOR SURFE MOUNTING SUIT FOR HIGH TEMPERTURE REFLOW SOLERING (UP TO 260 ) 2,000 HOUR LO LIFE @ +85 ) ESIGNE FOR UTOMTI MOUNTING N REFLOW SOLERING HRTERISTIS Rated Voltage
More informationAluminum Capacitors Standard C Snap-In
Aluminum Capacitors Standard - 105 C Snap-In FEATURES Useful life: 2000 h at +105 C Polarized aluminum electrolytic capacitors Small dimensions High C x U product Material categorization: for definitions
More informationSurface Mount Aluminum Electrolytic Capacitors
FETURES YLINDRIL V-HIP ONSTRUTION FOR SURFE MOUNTING REDUED SIZE VILLE WITH NTI-VIRTION TERMINTIONS (8 & 10mm DIMETER) SUIT FOR HIGH TEMPERTURE REFLOW SOLDERING (UP TO 260 ) 2,000 HOUR LOD LIFE @ +105
More informationAluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals
Aluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic
More informationMF-R Series - PTC Resettable Fuses
TV Rheinland *RoHS OMPLINT R 0 080T Features Radial Leaded evices ured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements RoHS compliant* gency recognition: pplications lmost
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
More informationTMJ Tantalum SMD S1gma TM Series Capacitors
The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely
More informationAluminum Capacitors Power High Ripple Current Snap-In
Aluminum Capacitors 198 PHR-SI 057 PSM-SI smaller dimensions Fig. 1 Component outlines 198 PHR-SI QUICK REFERENCE DATA longer life higher ripple 157 PUM-SI DESCRIPTION VALUE Nominal case size (Ø D x L
More informationSPECIFICATION FOR APPROVAL
RoHS ompliant SPEIFIATION FOR APPROVAL Product Name Product Type Uncoated Metallized Polyester Film apacitor(stacked version) 25(L25 Series) Product ode ustomer ustomer ode Issue Date 216-9 Xiamen Faratronic
More informationFEATURES. SMD Style. Reflow soldering. Lead (Pb)-free APPLICATIONS. U R (V) x 5.8
ECV Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors SMD Style Miniature dimension Pb-free Available RoHS* COMPLIANT Extended temperature range: 105 C QUICK REFERENCE DATA DESCRIPTION
More informationMF-R Series - PTC Resettable Fuses
*RoHS OMPLINT & **HLOGN FR R0 780T Features n Radial Leaded evices n ured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements n RoHS compliant* and alogen free** n gency recognition:
More informationHighest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES
FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode Benign failure mode under recommended use conditions Lower Undertab terminations layout: - High Volumetric Efficiency
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications
Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications ELECTRICAL SPECIFICATIONS FEATURES Manufactured with a combination of design, materials and tight process control to achieve
More informationAluminum Electrolytic Capacitor JNK
FEATES Extended Lifetime at High ripple current High Professional Switch Mode Power Supplies Frequency Converters SPECIFICATIONS Items Performance Characteristics Operating Temperature Range ( ) -40 ~
More informationtan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0
Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant
More informationOutput Current Input Current Over Voltage. VDC VDC ma ma(typ.) ma(typ.) VDC μf % MKZI10-24S
Doc. E-92 MKZI1 SERIES D/D ONVERTER 1W, Reinforced Insulation, Railway ertified FEATURES Industrial Standard 2" 1" Package Ultra-wide Input Range 9-36VD, 18-75VD, -1VD I/O Isolation 3VA with Reinforced
More informationSolid-Electrolyte TANTALEX Capacitors, Military MIL-PRF-39003/09 Qualified, Style CSR21
Solid-Electrolyte TANTALEX Capacitors, ilitary IL-PRF-39003/09 Qualified, Style CSR21 FEATURES Hermetically sealed etal cased Axial lead Weibull failure rates B, C, Exponential failure rates, P, R, S Low
More informationFilm Capacitors. Metallized Polyester Film Capacitors (MKT-S) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT-S) Series/Type: B32537 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
More informationSolid Tantalum Surface Mount, TANTAMOUNT, Molded Case, Very Low DCL
Solid Tantalum Surface Mount, TANTAMOUNT, Molded Case, Very Low DCL PERFORMANCE/ELECTRICAL CHARACTERISTICS www.vishay.com/doc?40088 Operating Temperature: - 55 C to + 125 C (above 85 C voltage derating
More informationLPH Large Capacitance Aluminum Electrolytic Capacitors
Series LPH 105 C, Miniaturized, High-Reliability, High-Ripple Capacitors ULTRAMINI, HIGH RELIABLILITY TYPE Smaller-sized and higher-ripple than L3J. Guaranteed for 2000 hours at 105 C. Outline Drawing
More informationSurface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
More informationWet Tantalum Tubular Capacitors
Castanet Tantalum Capacitors Wet Tantalum Tubular Capacitors CECC & ESA Axial & Surface Mount MIL-PRF-39006C Axial DSCC Drawing 93026 Axial High Temperature 200 C Axial & Surface Mount 150 Volt Rated Axial
More informationAPPLICATIONS Smart phone, Tablets, Notebook, LCD TV, Power supplies. P (0.081) 1.35 (0.050) 1.50 (0.059) max
FEATURES Conductive polymer electrode Benign failure mode under recommended use conditions Lower 3x reflow 260 C compatible CV range: 0.47-470μF / 2.5-125V 18 case sizes available APPLICATIONS Smart phone,
More informationFeatures. P d max. (W) V max (Vdc) I max (A)
POLY-FUSE Resettable PTs Radial Leaded > USR Series USR Series RoHS escription The USR Series radial leaded device is designed to provide overcurrent protection for US applications where space is not a
More informationNMJ Series 5.2kVDC Isolated 1W DC-DC Converters
www.murata-ps.com NMJ Series FEATURES UL60950 recognised Wide temperature performance at full 1 watt load, 40 to 85 Single and dual outputs SIP package style 5.2kVD isolation Hi Pot Test 3V, 5V & 12V input
More informationAluminum Electrolytic Capacitors Power Ultra Miniature Snap-In
Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In 057 PSM-SI smaller dimensions 159 PUL-SI 105 C 157 PUM-SI Fig. 1 longer life higher ripple 198 PHR-SI QUICK REFERENCE DATA DESCRIPTION VALUE
More informationDesign number. RC filtering circuit for USB interface
hip R Networks hip R Networks Type: EZDLU n Features. Smallest SMD R/ filter for USB interface l Including 2 circuits of p type R/ filter in a chip (hip size:3.2 mm.6 mm ) l Space saving and low placing
More informationSolid-Electrolyte TANTALEX Capacitors, Military MIL-PRF-39003/01 Qualified, Style CSR13
olid-electrolyte TANTALEX apacitors, ilitary IL-F-39003/01 Qualified, tyle 13 FEATUE Hermetically sealed etal cased Axial lead Weibull failure rates,,, Exponential failure rates,,, Tape and reel available
More informationFEATURES APPLICATIONS. High power DC/DC general applications MULTIANODE CONSTRUCTION
Tantalum Ultra Low Capacitor FEATURES Multi-anode construction Super low CV range: 10-2200μF / 2.5-50V 5 case sizes available Mirror multi-anode construction used with D, Y case capacitors reduces ESL
More informationHighest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES
CASE DIMENSIONS: millimeters (inches) Code H, K, L, O, S, T, X CASE 156 J XXXXX 156 = 15µF ID Code HO TO ORDER TCN L 157 FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode
More information1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
More informationSummary of Specifications
Large an Screw erminals Longer Life U36 Grade High Ripple 350 to 500VD Ratings RoHS ompliant 85 Maximum emperature he series is a longer life version of the industry standard U36D specifically designed
More informationAluminum Electrolytic Capacitors Power Ultra Long Life Snap-In
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In 158 PUL-SI 090 miniaturized 85 C PUL-SI Fig. 1 156 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 22 x 25
More informationSTANDARD CASE DIMENSIONS: millimeters (inches) W 1 dimension applies to the termination width for A dimensional area only.
L W FEATURES Non-burn safe technology Reliability level: 0.5%/1000 hours at 85ºC 13 case sizes available, standard and low profile Environmentally friendly, RoHS Compliant CV range: 2.2-1000μF / 1.8-10V
More informationAluminum Electrolytic Capacitors Power Ultra Long Life Snap-In
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In 059 PLL-SI 159 miniaturized 85 C PUL-SI Fig. 1 157 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 22 x 25
More informationApplications R71 M F 2100 AA 00 J
Polypropylene Pulse/High Frequency Capacitors R71 Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Overview The R71 is constructed of metallized polypropylene film with radial leads
More informationSurface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123
Surface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123 ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C, unless otherwise specified FEATURES Space-level reliability
More informationFEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications
Low - Automotive Product Range FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.22-680μF / 6.3-50V 5 case sizes available Power supply applications APPLICATIONS Power Supply
More informationhandbook, halfpage 059 PLL-SI 200 V, 250 V, 400 V, 450 V Category temperature range 25 to +105 C Endurance test at 105 C
FEATURES Polarized aluminium electrolytic capacitors, non-solid arge types, very small dimensions, cylindrical aluminium case, insulated with a blue sleeve Pressure relief on the top of the aluminium case
More informationRated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V
FEATURES Improved reliability 2x standard reduced by 25% to 0.0075 CV Robust against higher thermo-mechanical stresses during assembly process CV range: 0.10-680μF / 4-50V 6 case sizes available 130 low
More informationXTH-K-L-M-V Vishay Wet Tantalum Capacitors Cylindrical Body, Hermetically Sealed
XT-K-L-M-V Wet Tantalum Capacitors FEATURES igh temperature igh voltage igh capacitance Withstands high frequency vibration to 2000 z ermetically sealed Long shelf life SCC rawings 04032 & 04033 PERFORMANCE
More information