Aluminum Capacitors Power High Ripple Current Snap-In

Size: px
Start display at page:

Download "Aluminum Capacitors Power High Ripple Current Snap-In"

Transcription

1 Aluminum Capacitors 198 PHR-SI 057 PSM-SI smaller dimensions Fig. 1 Component outlines 198 PHR-SI QUICK REFERENCE DATA longer life higher ripple 157 PUM-SI DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 22 x 25 to 35 x 60 Rated capacitance range (E6/E12 series), C R 56 to 680 µf Tolerance on C R ± 20 % Rated voltage range, U R 400 and 450 V Category temperature range - 25 to + 85 C Endurance test at 85 C 7000 hours Useful life at 85 C hours Shelf life at 0 V, 85 C 1000 hours Based on sectional specification IEC /EN Climatic category IEC /085/56 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, miniaturized dimensions, cylindrical aluminum case, insulated with a blue sleeve Very high ripple current capability Keyed polarity version available High reliability APPLICATIONS Motor control and industrial systems Smoothing and filtering Standard and switched mode power supplies Energy storage in pulse systems RoHS COMPLIANT MARKING The capacitors are marked (where possible) with the following information: Rated capacitance (in µf) Tolerance code on rated capacitance, code letter in accordance with IEC (M for ± 20 %) Rated voltage (in V) Date code (YYMM) Name of manufacturer Code for factory of origin - sign to identify the negative terminal, visible from the top and side of the capacitor Code number Climatic category in accordance with IEC SELECTION CHART FOR C R, U R AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) C R U R (V) (µf) x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 40 - Document Number: For technical questions, contact: aluminumcaps2@vishay.com Revision: 08-Aug-08 49

2 198 PHR-SI Aluminum Capacitors DIMENSIONS in millimeters AND AVAILABLE FORMS TWO TERMINAL SNAP-IN Ø D + TERMINAL - TERMINAL L L + 2 max. 10 ± 0.1 Bottom view The minus terminal can be marked with a black dot or with an imprinted - sign. Ø 2 ± 0.1 (2 x) Fig. 2 Two terminal snap-in Fig. 3 Mounting hole diagram THREE TERMINAL SNAP-IN Ø 2 ± 0.1 (2 x) Ø D Ø 2.5 ± TERMINAL - TERMINAL L L + 2 max. 3.3 ± ± 0.1 minus pole marking Bottom view 4 ± ± 0.1 The negative terminal has TWO pins which are BOTH electrically connected. The 10 mm spacing of the 2 pin snap-in is used as the base layout and a third hole is added. The third hole is closer to the negative primary hole so that polarization is always maintained, together with added mechanical stability. Fig. 4 Three terminal snap-in Fig. 5 Mounting hole diagram For technical questions, contact: aluminumcaps2@vishay.com Document Number: Revision: 08-Aug-08

3 Aluminum Capacitors 198 PHR-SI Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE Ø D x L (mm) Ø D max. L max. MASS (g) PACKAGING QUANTITIES (units per box) CARDBOARD BOX DIMENSIONS L x W x H 22 x x 250 x x x 250 x x x 250 x x x 250 x x x 280 x x x 280 x x x 280 x x x 280 x x x 280 x x x 280 x x x 330 x x x 330 x x x 330 x x x 330 x x x 330 x x x 330 x x x 198 x x x 198 x x x 198 x x x 198 x x x 198 x x x 198 x x x 198 x 74 ELECTRICAL DATA SYMBOL DESCRIPTION C R rated capacitance at I R rated RMS ripple current at, 85 C I L1 max. leakage current after 1 minute at U R I L5 max. leakage current after 5 minutes at U R ESR typ./max. equivalent series resistance at Z typ./max. impedance at 10 khz Note Unless otherwise specified, all electrical values in Table 2 apply at T amb = 20 C, P = 86 to 106 kpa, RH = 45 to 75 % ORDERING EXAMPLE Electrolytic capacitor 198 PHR-SI 470µF/450V; ± 20 % Nominal case size: Ø 35 x 50 mm 2-terminal snap-in: Ordering code: MAL E3 Former 12NC: terminal snap-in: Ordering code: MAL E3 Former 12NC: Document Number: For technical questions, contact: aluminumcaps2@vishay.com Revision: 08-Aug-08 51

4 198 PHR-SI Aluminum Capacitors Table 2 ELECTRICAL DATA AND ORDERING INFORMATION U R (V) C R (µf) NOMINAL CASE SIZE Ø D x L (mm) I R 85 C (A) CUSTOMIZED PRODUCTS I L1 1min (µa) I L5 5min (µa) TYP. ESR MAX. ESR TYP. Z 10 khz MAX. Z 10 khz ORDERING CODE MAL TERM. 3-TERM x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E x E E3 If you are unable to find the capacitor you require, please contact your local sales organization; we are able to design and manufacture customized capacitors to meet your specific requirements. For technical questions, contact: aluminumcaps2@vishay.com Document Number: Revision: 08-Aug-08

5 Aluminum Capacitors 198 PHR-SI ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage 400 V versions U s =1.1xU R Reverse voltage 1V Current Leakage current After 1 minute at U R I L C R xu R +4µA After 5 minutes at U R I L C R xu R +4µA Inductance Equivalent series inductance (ESL) All case sizes typ. 19 nh max. 25 nh Table 3 MULTIPLIER OF RIPPLE CURRENT (I R ) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) I R MULTIPLIER RIPPLE CURRENT AND USEFUL LIFE 1.6 I R forced I R free (1) (2) (3) (4) Curve 1: case Ø DxL=35x25mm Curve 2: case Ø DxL=22x25mm Curve 3: case Ø DxL=35x50mm Curve 4: case Ø D x L = 22 x 40 mm air velocity (m/s) Fig. 6 Multiplier of ripple current (I R ) as a function of air-flow MAXIMUM RIPPLE CURRENT MULTIPLIER PARAMETER CONDITION MAXIMUM RIPPLE CURRENT MULTIPLIER VALUE Ambient temperature (T amb ) 70 C from nomogram; see Fig Operating frequency (f) 300 Hz from frequency table; see Table 1.17 Air-flow 2 m/s from air-flow; see Fig Note Calculation example for case Ø D x L = 35 x 25 mm Therefore the maximum ripple current multiplier at 70 C, 300 Hz and 2 m/s air-flow = 1.57 x 1.17 x 1.35 = Document Number: For technical questions, contact: aluminumcaps2@vishay.com Revision: 08-Aug-08 53

6 198 PHR-SI Aluminum Capacitors 2.4 MGA I A I R life multiplier 1.2 I A = actual ripple current at 1.1 I (1) R = rated ripple current at and 85 C (1) 1.0 Useful life at 85 C and U R applied: hours T amb ( C) Fig. 7 Multiplier of useful life as a function of ambient temperature and ripple current load Table TEST PROCEDURES AND REQUIREMENTS NAME OF TEST TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS Endurance IEC / EN subclause 4.13 Useful life CECC subclause T amb =85 C; U R applied; 7000 hours T amb =85 C; U R and I R applied; hours ΔC/C: ± 10 % ESR 2 x spec. limit IL5 spec. limit ΔC/C: ± 30 % ESR 3 x spec. limit IL5 spec. limit Shelf life (storage at high temperature) IEC / EN subclause 4.17 T amb =85 C; no voltage applied; 1000 hours after test: U R to be applied for 30 minutes, 24 to 48 hours before measurement ΔC/C: ± 15 % ESR 2 x spec. limit IL5 2 x spec. limit For technical questions, contact: aluminumcaps2@vishay.com Document Number: Revision: 08-Aug-08

7 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: Revision: 18-Jul-08 1

Aluminum Capacitors Power Ultra Long Life Snap-In

Aluminum Capacitors Power Ultra Long Life Snap-In 059 PLL-SI QUICK REFERENCE DATA DESCRIPTION Nominal case size (Ø D x L in mm) Fig.1 Component outlines 159 miniaturized 85 C PUL-SI VALUE 22 x 25 to 35 x 60 157 PUM-SI Rated capacitance range (E6/E12 series),

More information

Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In

Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In 158 PUL-SI 090 miniaturized 85 C PUL-SI Fig. 1 156 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 22 x 25

More information

Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In

Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In 057 PSM-SI smaller dimensions 159 PUL-SI 105 C 157 PUM-SI Fig. 1 longer life higher ripple 198 PHR-SI QUICK REFERENCE DATA DESCRIPTION VALUE

More information

Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In

Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In 059 PLL-SI 159 miniaturized 85 C PUL-SI Fig. 1 157 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 22 x 25

More information

Aluminum Capacitors Power High Ripple Current Screw Terminals

Aluminum Capacitors Power High Ripple Current Screw Terminals 101/102 PHR-ST Aluminum Capacitors FEATURES ST STB Fig.1 Component outline Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated with a blue

More information

Aluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In

Aluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In Aluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In FEATURES Useful life: 2000 h at 105 C Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, miniaturized

More information

Aluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals

Aluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals Aluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic

More information

Aluminum Capacitors, Power High Ripple Current, Screw Terminals

Aluminum Capacitors, Power High Ripple Current, Screw Terminals Aluminum Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic capacitors,

More information

Aluminum Electrolytic Capacitors Radial Very Low Impedance

Aluminum Electrolytic Capacitors Radial Very Low Impedance Aluminum Electrolytic Capacitors Radial Very Low Impedance FEATURES Very low impedance and low ESR Very long useful life: 4000 h to 0 000 h at 05 C, very high reliability Excellent ripple current capability

More information

Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature

Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, insulated with a blue

More information

Aluminum Capacitors Standard - 85 C Snap-In

Aluminum Capacitors Standard - 85 C Snap-In Aluminum Capacitors Standard - 85 C Snap-In FEATURES Useful life: 2000 h at +85 C Polarized aluminum electrolytic capacitors Small dimension High C x U product Material categorization: for definitions

More information

Aluminum Capacitors Standard C Snap-In

Aluminum Capacitors Standard C Snap-In Aluminum Capacitors Standard - 105 C Snap-In FEATURES Useful life: 2000 h at +105 C Polarized aluminum electrolytic capacitors Small dimensions High C x U product Material categorization: for definitions

More information

handbook, halfpage 059 PLL-SI 200 V, 250 V, 400 V, 450 V Category temperature range 25 to +105 C Endurance test at 105 C

handbook, halfpage 059 PLL-SI 200 V, 250 V, 400 V, 450 V Category temperature range 25 to +105 C Endurance test at 105 C FEATURES Polarized aluminium electrolytic capacitors, non-solid arge types, very small dimensions, cylindrical aluminium case, insulated with a blue sleeve Pressure relief on the top of the aluminium case

More information

Aluminum Capacitors, Power General Purpose Screw Terminals

Aluminum Capacitors, Power General Purpose Screw Terminals Aluminum Capacitors, Power General Purpose Screw erminals FEAURES Useful life: 5000 h at +85 C Efficient design Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic capacitors,

More information

FEATURES. SMD Style. Reflow soldering. Lead (Pb)-free APPLICATIONS. U R (V) x 5.8

FEATURES. SMD Style. Reflow soldering. Lead (Pb)-free APPLICATIONS. U R (V) x 5.8 ECV Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors SMD Style Miniature dimension Pb-free Available RoHS* COMPLIANT Extended temperature range: 105 C QUICK REFERENCE DATA DESCRIPTION

More information

DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents

DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents DATA SHEET Supersedes data of 18th January 2000 File under BCcomponents, BC01 2000 Apr 07 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case,

More information

Aluminum Electrolytic Capacitors, Power High Ripple for Traction, Screw Terminals

Aluminum Electrolytic Capacitors, Power High Ripple for Traction, Screw Terminals Aluminum Electrolytic Capacitors, Power igh Ripple for raction, Screw erminals FEAURES ong useful life: > 10 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm ow ESR Polarized aluminum electrolytic

More information

Resin-Coated, Radial-Leaded Solid Tantalum Capacitors

Resin-Coated, Radial-Leaded Solid Tantalum Capacitors FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*

More information

Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance

Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on

More information

Solid Tantalum Chip Capacitors TANTAMOUNT Conformal Coated, Maximum CV, Low ESR

Solid Tantalum Chip Capacitors TANTAMOUNT Conformal Coated, Maximum CV, Low ESR TANTAMOUNT Conformal Coated, FEATURES Large capacitance rating range Lowest for a surface mount tantalum chip capacitor % surge current conditioning for C, D and R cases Terminations: Tin (2) standard

More information

AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type

AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type www.vishay.com AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES Low loss dielectric Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

Solid Tantalum Surface Mount Capacitors TANTAMOUNT Molded Case, Low ESR

Solid Tantalum Surface Mount Capacitors TANTAMOUNT Molded Case, Low ESR Solid Tantalum Surface Mount Capacitors TR3 FEATURES Terminations: 100 % Matte Tin, standard Tin/lead available Molded case available in six case codes Compatible with High Volume automatic pick and place

More information

Aluminum Capacitors Radial Style

Aluminum Capacitors Radial Style FEATURES Polarized Aluminum electrolytic capacitor High C x U product Small dimensions Compliant to RoHS directive 2002/95/EC Component outlines. Obsolete - please refer to: www.vishay.com/doc?25014 APPLICATIONS

More information

SMD 0402, Glass Protected NTC Thermistors

SMD 0402, Glass Protected NTC Thermistors 2381 615 4.../NTCS0402E3...T SMD 0402, Glass Protected QUICK REFERENCE DATA PARAMETER Resistance value at 25 C VALUE 4.7 kω to 100 kω Tolerance on R 25 - value ± 1 %; ± 2 %; ± 3 %; ± 5 % B 25/85 value

More information

Solid Tantalum Chip Capacitors TANTAMOUNT, Commercial, Surface Mount

Solid Tantalum Chip Capacitors TANTAMOUNT, Commercial, Surface Mount Solid Tantalum Chip Capacitors PERFORMANCE/ELECTRICAL CHARACTERISTICS Operating Temperature: - 55 C to + 85 C (To + 125 C with voltage derating) Note: Refer to Doc. 40088 Capacitance Range: 0.10 µf to

More information

NTC Thermistors, Molded Range

NTC Thermistors, Molded Range 2381 641 6... N Thermistors, Molded Range FEATURES Excellent for surface temperature measurement Designed for harsh environments Based on the 2322 640 0... naked thermistor chips. Old part number was 2322

More information

Ø 5 mm Film Dielectric Trimmers

Ø 5 mm Film Dielectric Trimmers Ø 5 mm Film Dielectric Trimmers FEATURES Housing diameter 5 mm Top and bottom or top adjustment Round head Mounting: radial Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

Solid Tantalum Surface Mount, TANTAMOUNT, Molded Case, Very Low DCL

Solid Tantalum Surface Mount, TANTAMOUNT, Molded Case, Very Low DCL Solid Tantalum Surface Mount, TANTAMOUNT, Molded Case, Very Low DCL PERFORMANCE/ELECTRICAL CHARACTERISTICS www.vishay.com/doc?40088 Operating Temperature: - 55 C to + 125 C (above 85 C voltage derating

More information

T95 D 107 K 010 E A A S TYPE CASE CODE DC VOLTAGE RATING AT + 85 C TERMINATION AND PACKAGING

T95 D 107 K 010 E A A S TYPE CASE CODE DC VOLTAGE RATING AT + 85 C TERMINATION AND PACKAGING T95 Solid Tantalum Chip Capacitors, FEATURES High reliability; Weibull grading available Surge current testing per MIL-PRF-55365 options available Standard and low ESR options Terminations: SnPb, standard.

More information

handbook, halfpage lower RLL 116

handbook, halfpage lower RLL 116 FEATURES Polarized aluminium electrolytic capacitors, non-solid Radial leads, cylindrical aluminium case with pressure relief, insulated with a blue vinyl sleeve Charge and discharge proof Long useful

More information

Film Dielectric Trimmers

Film Dielectric Trimmers Film Dielectric Trimmers FEATURES High temperature type Housing dimensions: 8 mm x 9 mm x 10 mm For a basic grid of 2.54 mm Versions available with 1 or 2 rotor contacts Top and bottom adjustment Mounting:

More information

Wet Tantalum Capacitors Sintered Anode TANTALEX Capacitors for Operation to +125 C, Elastomer-Sealed

Wet Tantalum Capacitors Sintered Anode TANTALEX Capacitors for Operation to +125 C, Elastomer-Sealed Wet Tantalum Capacitors Sintered Anode TANTALEX Capacitors for Operation to, Elastomer-Sealed FEATURES Axial through-hole terminations: standard tin / lead (SnPb), 100 % tin (RoHS-compliant) available

More information

High Voltage Ceramic DC Disc Capacitors with Axial Leads, 10 kv DC to 30 kv DC

High Voltage Ceramic DC Disc Capacitors with Axial Leads, 10 kv DC to 30 kv DC High Voltage Ceramic DC Disc Capacitors with Axial Leads, 10 kv DC to 30 kv DC FEATURES Available Class 1 and class 2 ceramic High insulation resistance Epoxy encapsulated Wide capacitance range Ceramic

More information

Film Dielectric Trimmers

Film Dielectric Trimmers Film Dielectric Trimmers FEATURES High temperature type Housing dimensions: 11 mm x 14 mm x 9 mm For a basic grid of 2.54 mm Top adjustment Mounting: radial Material categorization: for definitions of

More information

Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding)

Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) ELECTRICAL SPECIFICATIONS NON-MAGNETIC C0G (NP0) GENERAL SPECIFICATION Note Electrical characteristics at

More information

Film Dielectric Trimmers

Film Dielectric Trimmers TEST VOLTAGE (DC) FOR 1 MINUTE: 5 V MAXIMUM CONTACT RESISTANCE: 5 mω MINIMUM INSULATION RESISTANCE: 1 MΩ FEATURES High temperature type Housing dimensions: 1 mm x 11 mm x 11 mm For a basic grid of 2.54

More information

Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering)

Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering) Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering) FEATURES Manufactured with non-magnetic materials Safety screened for magnetic properties C0G (NP0)

More information

NTC Thermistors, 2-Point Micro Chip Sensor Insulated Leads

NTC Thermistors, 2-Point Micro Chip Sensor Insulated Leads NTC Thermistors, 2-Point Micro Chip Sensor Insulated Leads QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 2.06K to 10K Ω Tolerance on R 25 -value ± 1.92; ± 2.19 % B 25/85 -value 3511

More information

Solid-Electrolyte TANTALEX Capacitors, Military MIL-PRF-39003/09 Qualified, Style CSR21

Solid-Electrolyte TANTALEX Capacitors, Military MIL-PRF-39003/09 Qualified, Style CSR21 Solid-Electrolyte TANTALEX Capacitors, ilitary IL-PRF-39003/09 Qualified, Style CSR21 FEATURES Hermetically sealed etal cased Axial lead Weibull failure rates B, C, Exponential failure rates, P, R, S Low

More information

Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type

Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long

More information

1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometers

1/2 (12.7 mm) Conductive Plastic and Cermet Potentiometers , /" 7 mm Conductive Plastic and Cermet FEATURES Robust construction High rotational life cycles Up to three sections PC support plates Rotary switches and solder lugs terminals available Compliant to

More information

1/4" Square Single-Turn Cermet Sealed Trimmer

1/4 Square Single-Turn Cermet Sealed Trimmer /4" Square Single-Turn Cermet Sealed Trimmer FEATURES Industrial grade Fully sealed Miniature package Rotor designed for automatic machine adjust interface Withstands harsh environments and immersion cleaning

More information

Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications

Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications ELECTRICAL SPECIFICATIONS FEATURES Manufactured with a combination of design, materials and tight process control to achieve

More information

Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications

Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a

More information

Metallized Polyester Film Capacitors MKT Radial Potted Type

Metallized Polyester Film Capacitors MKT Radial Potted Type MKT 373 168x12(halfpage) l w h FEATURES Available taped and loose in box Lead (Pb)-free product RoHS-compliant product APAITANE TOLERANE ± 10 %; ± 5 % e3 RoHS OMPLIANT P lt Ødt RATED (D) VOLTAGE V; 250

More information

High Current Thermal Fuse

High Current Thermal Fuse High Current Thermal Fuse FEATURES Functioning temperature: F = (235 ± 15) C Holding temperature: H = 160 C Current: 50 A Suitable for insert assembly systems Material categorization: For definitions of

More information

Power Panel 6 W Potentiometer

Power Panel 6 W Potentiometer Power Panel 6 W Potentiometer FEATURES High power rating 6 W at 50 C Cermet element Full sealing Mechanical strength Industrial and professional grade Tests according to CECC 41000 or IEC 60393-1 Material

More information

SMD 0805, NTC Thermistors AgPd Terminations

SMD 0805, NTC Thermistors AgPd Terminations NTCS0805E4.../2381 615 1... SMD 0805, NTC Thermistors AgPd REMARK Non preferred type (replaced by NTCS0805E3...T/2381 615 5...) QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 2K to

More information

Ø 7.5 mm Film Dielectric Trimmers

Ø 7.5 mm Film Dielectric Trimmers TEST VOLTAGE (DC) FO 1 MINUTE: 5 V MAXIMUM CONTACT ESISTANCE: 1 mω MINIMUM INSULATION ESISTANCE: 1 MΩ CATEGOY TEMPEATUE ANGE: PP - 4 to + 7 C PE, PC, PTFE, PET - 4 to + 85 C CLIMATIC CATEGOY (IEC 668):

More information

9 mm Multi-Ganged Potentiometer

9 mm Multi-Ganged Potentiometer 9 mm Multi-Ganged Potentiometer FEATURES Conductive plastic element Ultra compact (extra miniature module size) Multiple assemblies (up to seven modules) Shaft and panel sealed option Center mechanical

More information

1/4" Square Single-Turn Cermet Sealed Trimmer

1/4 Square Single-Turn Cermet Sealed Trimmer /4" Square Single-Turn Cermet Sealed Trimmer FEATURES Industrial grade Fully sealed Miniature package Rotor designed for automatic machine adjust interface Withstands harsh environments and immersion cleaning

More information

9 mm Multi-Ganged Potentiometer

9 mm Multi-Ganged Potentiometer 9 mm Multi-Ganged Potentiometer QUICK REFERENCE DATA Multiple module Up to 7 modules Switch module n/a Detent module Yes Special electrical laws A: linear, L: logarithmic, F: reverse logarithmic and others

More information

NTC Thermistors, Mini Epoxy PVC Insulated Leads

NTC Thermistors, Mini Epoxy PVC Insulated Leads NTC Thermistors, Mini Epoxy PVC Insulated Leads FEATURES High adhesive strength between the PVC wire and the encapsulating lacquer Accurate down to ± 0.3 C Small body of max. 3 mm for easy installation

More information

High Power, High Current EDG Mica Grid Resistors, Grid Mill Bank Design

High Power, High Current EDG Mica Grid Resistors, Grid Mill Bank Design High Power, High Current EDG Mica Grid Resistors, Grid Mill Bank Design FEATURES assembly 8 kw at 40 C Superior watt density for higher powers in same space EDG technology support system improved for lighter

More information

XTH-K-L-M-V Vishay Wet Tantalum Capacitors Cylindrical Body, Hermetically Sealed

XTH-K-L-M-V Vishay Wet Tantalum Capacitors Cylindrical Body, Hermetically Sealed XT-K-L-M-V Wet Tantalum Capacitors FEATURES igh temperature igh voltage igh capacitance Withstands high frequency vibration to 2000 z ermetically sealed Long shelf life SCC rawings 04032 & 04033 PERFORMANCE

More information

Power Panel 6 W Potentiometer

Power Panel 6 W Potentiometer Power Panel 6 W Potentiometer FEATURES High power rating 6 W at 50 C Cermet element Full sealing Mechanical strength Industrial and professional grade Tests according to CECC 41000 or IEC 60393-1 Material

More information

MKT 368 Vishay BCcomponents

MKT 368 Vishay BCcomponents Metallized Polyester Film apacitors MKT 368 Vishay Bcomponents 168x12(halfpage) l w FEATURES Available taped on reel and loose in box seating plane (1) α h Lead (Pb)-free product RoHS-compliant product

More information

16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:

16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of: T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working

More information

NTC Thermistors, 2-Point Radial Leaded, Automotive Grade

NTC Thermistors, 2-Point Radial Leaded, Automotive Grade NTC Thermistors, 2-Point Radial Leaded, Automotive Grade FEATURES High accuracy over a wide temperature range High stability over a long life Exceptional thermal shock withstanding performance AEC-Q200

More information

Aluminum Capacitors + 85 C, Powerlytic Electrolytics

Aluminum Capacitors + 85 C, Powerlytic Electrolytics FEATURES Designed for applications requiring greatest possible capacitance in small physical case sizes QUICK REFERENCE DATA DESCRIPTION VALUE Operating temperature - 20 C to + 85 C Tolerance on C R :

More information

Surface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123

Surface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123 Surface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123 ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C, unless otherwise specified FEATURES Space-level reliability

More information

Lower Voltage Ceramic Disc Capacitors 2 kvdc to 7.5 kvdc

Lower Voltage Ceramic Disc Capacitors 2 kvdc to 7.5 kvdc Lower Voltage eramic isc apacitors 2 kv to 7.5 kv Fig. 1 FEAURES max. 1.250" min. (32 mm) inned opper Leads LO Low losses High capacitance in small sizes High stability Radial leads 0.125" (3.2 mm) max.

More information

1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer

1/2 (12.7 mm) Conductive Plastic and Cermet Potentiometer 1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer FEATURES Robust construction High rotational life (50 000 cycles) Up to three sections PC support plates Rotary switches and solder lugs terminals

More information

Aluminum Capacitors +85 C, Large Can

Aluminum Capacitors +85 C, Large Can Aluminum Capacitors +85 C, arge Can FEATURES Useful life: 2000 h at +85 C The industry standard for large can aluminum capacitors Ideal for high wattage power supplies and energy storage applications Capacitance

More information

NTC Thermistors, Flex Foil Sensors

NTC Thermistors, Flex Foil Sensors NTC Thermistors, Flex Foil Sensors QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 10K, 47K Tolerance on R 25 -value ± 3 % B 25/85 -value 3960 K Tolerance on B 25/85 -value ± 1 % Operating

More information

Wet Tantalum Capacitors Cylindrical Body, Hermetically Sealed

Wet Tantalum Capacitors Cylindrical Body, Hermetically Sealed Wet Tantalum Capacitors Cylindrical Body, ermetically Sealed PERFORMANCE CARACTERISTICS Operating Temperature: to +175 C with proper derating Voltage Range: 8 V C to 630 V C at 85 C Reverse Voltage: none

More information

For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k

For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal

More information

Ceramic Singlelayer DC Disc Capacitors for General Purpose Class 1, Class 2, and Class 3, 1 kv DC, 2 kv DC, 3 kv DC, 6 kv DC

Ceramic Singlelayer DC Disc Capacitors for General Purpose Class 1, Class 2, and Class 3, 1 kv DC, 2 kv DC, 3 kv DC, 6 kv DC Ceramic Singlelayer DC Disc Capacitors for General Purpose Class 1, Class 2, and Class 3, 1 kv DC, 2 kv DC, 3 kv DC, 6 kv DC EATURES High capacitance with small size High stability Crimp and straight lead

More information

Automotive, Sulfur Resistant Lead (Pb)-Free Thick Film, Rectangular Chip Resistors

Automotive, Sulfur Resistant Lead (Pb)-Free Thick Film, Rectangular Chip Resistors Automotive, Sulfur Resistant Lead (Pb)-Free Thick Film, Rectangular Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 C W LIMITING ELEMENT VOLTAGE

More information

Aluminum Capacitors + 85 C, Powerlytic Electrolytics

Aluminum Capacitors + 85 C, Powerlytic Electrolytics Aluminum Capacitors + 85 C, Powerlytic Electrolytics QUICK REFERENCE DATA + 75 %, - 10 % DESCRIPTION VALUE Operating temperature - 20 C to + 85 C Tolerance on C R : 3 WV DC to 75 WV DC 100 WV DC to 450

More information

Polyester Capacitors Filmite E, ORANGE DROP, Radial Lead

Polyester Capacitors Filmite E, ORANGE DROP, Radial Lead Polyester Capacitors Filmite E, ORANGE DROP, Radial ead PERFORMANCE CHARACTERITIC Operating Temperature: - 55 C to + 85 C To + 105 C when working voltage is reduced to 70 % of + 85 C rating; to + 125 C

More information

AC and Pulse Polypropylene Film Capacitors MKP Radial Epoxy Lacquered Type

AC and Pulse Polypropylene Film Capacitors MKP Radial Epoxy Lacquered Type A and Pulse Polypropylene Film apacitors MKP Radial Epoxy Lacquered Type seating plane (1) P APPLIATIONS Low losses due to low contact resistance and low loss dielectric result in applications where high

More information

Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550

Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550 Standard capacitors Applications Frequency converters Uninterruptible power supplies All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Specifications

More information

Self Contained Weighing Module

Self Contained Weighing Module Self Contained Weighing Module Model 9010 FEATURES Capacities 3-90kg Unique adjustable tare load cancelling mechanism Highly effective viscous damping 6 Built-in overload limit stops in three directions

More information

Wirewound Resistor, Industrial High Power, Vitreous Tubular, Adjustable, Low Values 0.12 to 560

Wirewound Resistor, Industrial High Power, Vitreous Tubular, Adjustable, Low Values 0.12 to 560 Wirewound Resistor, Industrial High Power, Vitreous Tubular, djustable, Low Values to 560 FETURES High power rating: 16 W to 600 W at 25 C Heavy overloads 10 P n 15 s 1 % Low ohmic values 0.10 available

More information

Solid-Electrolyte TANTALEX Capacitors, Military MIL-PRF-39003/01 Qualified, Style CSR13

Solid-Electrolyte TANTALEX Capacitors, Military MIL-PRF-39003/01 Qualified, Style CSR13 olid-electrolyte TANTALEX apacitors, ilitary IL-F-39003/01 Qualified, tyle 13 FEATUE Hermetically sealed etal cased Axial lead Weibull failure rates,,, Exponential failure rates,,, Tape and reel available

More information

Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size

Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching

More information

Type 381LX / 383LX 105 C High Ripple, Snap-In Aluminum High Ripple, Long Life, 2, 4 and 5 pin styles available

Type 381LX / 383LX 105 C High Ripple, Snap-In Aluminum High Ripple, Long Life, 2, 4 and 5 pin styles available High Ripple, Long Life, 2, 4 and 5 pin styles available Specifications Temperature Range Rated Voltage Range Adding longer-life and more ripple capability to the excellent value of Type 380L/LX capacitors,

More information

Snap-in Type Aluminium Electrolytic Capacitors

Snap-in Type Aluminium Electrolytic Capacitors Endurance: 85 2000hours Recommended Applications : Applying to switching power supply and other industry/ commercial field Corresponding product to RoHS SPECIFICATIONS Item Category Temperature Range -40~+85

More information

Wirewound Resistors, Industrial Power, Tubular, Ribwound (RB), Fixed (RBEF, RBSF)

Wirewound Resistors, Industrial Power, Tubular, Ribwound (RB), Fixed (RBEF, RBSF) REF, RSF Wirewound Resistors, Industrial Power, Tubular, Ribwound (R), Fixed (REF, RSF) FETURES High temperature silicone or vitreous enamel coatings Excellent for pulsing applications ll welded construction

More information

Aluminum Capacitors + 85 C, Powerlytic Electrolytics

Aluminum Capacitors + 85 C, Powerlytic Electrolytics 39D Aluminum Capacitors FEATURES Designed for applications requiring greatest possible capacitance in small physical case sizes QUICK REFERENCE DATA DESCRIPTION VALUE Operating temperature - 20 C to +

More information

Radial Aluminium Electrolytic Capacitors 105 C

Radial Aluminium Electrolytic Capacitors 105 C Radial Aluminium Electrolytic Capacitors 105 C Standard, miniaturized, Endurance 1.000h to 2.500h at 105 C Rated voltage range: 6,3V to 100V, Rated capacitance range: 0,47µF to 12.000µF range: Ø 5,5 x

More information

Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size

Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching

More information

Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C

Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:

More information

Transient Voltage Suppressor

Transient Voltage Suppressor Features 400W surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) Typical IR less then 1μA above 10V RoHS

More information

K05 TYPE -40 C +105 C 5000H

K05 TYPE -40 C +105 C 5000H K05 TYPE -40 C +105 C 5000H Surge-proof capacitor in aluminium can with insulation sleeve Safety vent at bottom case or aside case. Snap in terminals for PCB mounting. Very high CV for unit volume with

More information

Type 380LX / 382LX 85 C High Capacitance, Snap-In Aluminum

Type 380LX / 382LX 85 C High Capacitance, Snap-In Aluminum The excellent value of Type 380L/LX capacitors finds application in switching power supply input and output circuits and even motor drives where the high surface area of multiple units in parallel approaches

More information

Wirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Tubular

Wirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Tubular Wirewound Resistors, Industrial Power, Vitreous oated, djustable Tubular FETURES High temperature vitreous coating omplete welded construction Tight tolerance of 5 % for values above 1 Excellent stability

More information

Snap-in Type Aluminium Electrolytic Capacitors

Snap-in Type Aluminium Electrolytic Capacitors Endurance:105 3000 hours Recommended Applications : Smoothing circuit, TV/Monitor,Adapter, SMPS Corresponding product to RoHS Long Life LG SPECIFICATIONS Item Category Temperature Range Range Rated acitance

More information

1N4728A to 1N4764A. Zener Diodes. Vishay Semiconductors

1N4728A to 1N4764A. Zener Diodes. Vishay Semiconductors Zener Diodes Features Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits with high power rating. Standard Zener voltage tolerance is ± 5 %. Applications Voltage stabilization

More information

Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life

Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple

More information

55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A

55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:

More information

LPH Large Capacitance Aluminum Electrolytic Capacitors

LPH Large Capacitance Aluminum Electrolytic Capacitors Series LPH 105 C, Miniaturized, High-Reliability, High-Ripple Capacitors ULTRAMINI, HIGH RELIABLILITY TYPE Smaller-sized and higher-ripple than L3J. Guaranteed for 2000 hours at 105 C. Outline Drawing

More information

SMM SERIES Engineering Bulletin Mar 07

SMM SERIES Engineering Bulletin Mar 07 Series SERIES Snap Mount Downsize High Long Life RoHS Compliant 85 C Maximum Temperature The series is a high voltage, long life snap-in capacitor series that offers downsized versions of the SMH series.

More information

1W, 10V - 200V Surface Mount Silicon Zener Diode

1W, 10V - 200V Surface Mount Silicon Zener Diode 1W, 10V - 200V Surface Mount Silicon Zener Diode FEATURES Photo Glass passivated junction Ideal for automated placement Low inductance Typical IR less than 1μA above 11V Compliant to RoHS Directive 2011/65/EU

More information

Type 947D Polypropylene, High Energy Density, DC Link Capacitors

Type 947D Polypropylene, High Energy Density, DC Link Capacitors Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability

More information

Type 381EL 105 ºC Ultra-Long Life Snap-In, Aluminum More than 100,000 Hours Operation at 65 C and Rated 105 C Ripple OBSOLETE

Type 381EL 105 ºC Ultra-Long Life Snap-In, Aluminum More than 100,000 Hours Operation at 65 C and Rated 105 C Ripple OBSOLETE Specifications Temperature Range Rated Voltage Range 160 to 450 Vdc Capacitance Range 39 µf to 2,200 µf ± 20% Capacitance Tolerance ± 20% Leakage Current Ripple Current Multipliers The new 381EL extends

More information

Aluminum electrolytic capacitors

Aluminum electrolytic capacitors Aluminum electrolytic capacitors Capacitors with 4-pin snap-in terminals and solder pins Series/Type: Date: December 2006 EPCOS AG 2007. Reproduction, publication and dissemination of this publication,

More information

MIL-PRF Series. Military Conventional Wet Tantalum OUTLINE DIMENSIONS. CASE DIMENSIONS: millimeters (inches)

MIL-PRF Series. Military Conventional Wet Tantalum OUTLINE DIMENSIONS. CASE DIMENSIONS: millimeters (inches) This data sheet contains the MIL-PRF-39006 ratings for which AVX is a qualified approved supplier. This will be continually updated as the qualification expands. For COTS-Plus equivalent ratings please

More information

CapXon LD Series LD Series H Features Updated Series Preliminary Data Sheet Standard capacitors

CapXon LD Series LD Series H Features Updated Series Preliminary Data Sheet Standard capacitors Updated Series Preliminary Data Sheet 85 5000H Features Standard capacitors Applications Switch-mode power supplies in industrial and entertainmentelectronics Uninterruptible power supplies Features High

More information