CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

Size: px
Start display at page:

Download "CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS"

Transcription

1 CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice.

2 1. Features Ultra Low & high ripple current capability Endurance: 2000 hours at 125 C Compliant to the RoHS directive Suitable for industrial power supply, medical equipment & automotive application 2. Specifications Item Performance Characteristics Operating Temperature range C Voltage Range Tolerance 6.3V ~ 100V ± 20% (at 120 Hz / 20 C) Surge Voltage Voltage x 1.15 Leakage Current Dissipation Factor (tan δ) Temperature Characteristics (Impedance ratio at 100 KHz) Within the specified value as in standard rating Less than or equal to the specified value at 20 C, 120 Hz Z (-25 C) / Z (+20 C) 1.15 Z (-55 C) / Z (+20 C) 1.25 The following specifications shall be satisfied when the capacitors are restored to 20 C after the rated voltage is applied for 6.3V~25V 2,000 hours, 35V 1,500 hours at 125 C. Endurance change ± 30% of the initial value D. F. (Tan δ) 300% of initial specified value Leakage current 300% of initial specified value Initial specified value or less The following specifications shall be satisfied when the capacitors are restored to 20 C after subjecting them at 60 C, 90 to 95% RH for 1,000 hours Bias Humidity Test change ± 20% of the initial value D. F. (Tan δ) 150% of initial specified value Leakage current 150% of initial specified value Initial specified value or less The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 125 C for 30 seconds through a protective resistor (R=1KΩ) and discharge for 5 minutes 30 seconds. Surge Voltage Test change ± 20% of the initial value D. F. (Tan δ) 150% of initial specified value Leakage current 150% of initial specified value Initial specified value or less Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 125 C) * In case of any doubt arises, measure the leakage current after voltage applied for 120 minutes at 125 C. *Contents in this sheet are subject to change without prior notice.

3 3. Outline and Dimension Unit : mm φd +0.5max φd ± P α (max) Part Number Coding Rule FEH 100 M 10V 611 TB2.5 Series Tolerance voltage Size Packaging Reserved 125 C, Low Code 1µF 1R0 4.7µF 4R7 47µF µF 471 4,700µF ,000µF ,000µF 474 Tolerance Code ± 20% M ± 10% K Voltage Code 6.3V 6.3V 10V 10V 16V 16V 50V 50V 100V 100V Size Code 6.3 x x x x Style Lead Cut (length mm) Tape/Ammo (pitch mm) Code C(L) TB(P) 5. Frequency coefficient of allowable ripple current Frequency Coefficient 120Hz f < 1KHz KHz f < 10KHz KHz f < 100KHz KHz f < 300KHz 1.00

4 6. Standard Products Table (φd Lmm) (µf) voltage (Vdc) x x x x x x x x x x x x x x x x 21 * Please contact our sales representative for the product availability in cells.

5 7. Standard Ratings voltage (V.DC) (µf) Case Size D x L (mm) Tan δ Leakage Current (µa) (mω max./ 20 C 100KHz to 300KHz) ripple current ma rms, 100 KHz Tx 105 C 105 C < Tx 125 C Part Number , ,400 1,760 FEH331M6.3V ,210 1,760 FEH471M6.3V x ,600 1,620 FEH561M6.3V V ,200 2,080 FEH561M6.3V , ,860 2,020 FEH821M6.3V1012 1, , ,940 2,020 FEH152M6.3V812 1, , ,560 2,020 FEH152M6.3V x , ,820 1,820 FEH681M10V V , ,000 1,840 FEH821M10V , ,000 2,160 FEH102M10V , ,400 1,760 FEH331M16V , ,400 1,760 FEH471M16V , ,400 2,160 FEH471M16V812 16V , ,400 2,160 FEH821M16V812 1, , ,100 2,440 FEH102M16V1012 1,000 8 x , ,100 2,440 FEH102M16V821 1, , ,100 2,240 FEH122M16V1012 1, , ,100 2,240 FEH152M16V , ,750 1,900 FEH221M25V , ,750 1,900 FEH331M25V812 25V , ,750 1,900 FEH471M25V , ,050 2,020 FEH471M25V , ,050 2,020 FEH681M25V V , ,300 1,320 FEH271M30V ,700 1,080 FEH470M35V x ,200 1,280 FEH470M35V ,600 1,040 FEH680M35V ,400 1,360 FEH101M35V , ,400 1,360 FEH151M35V812 35V , ,400 1,360 FEH221M35V , ,900 1,560 FEH221M35V x , ,400 1,360 FEH331M35V , ,900 1,560 FEH331M35V , ,400 1,360 FEH391M35V , ,400 1,360 FEH471M35V x , ,580 2,632 FEH102M35V1021

6 voltage (V.DC) (µf) Case Size D x L (mm) Tan δ Leakage Current (µa) (mω max./ 20 C 100KHz to 300KHz) ripple current ma rms, 100 KHz Tx 105 C 105 C < Tx 125 C Part Number x , FEH100M50V x ,600 1,020 FEH470M50V ,700 1,080 FEH470M50V x ,200 1,120 FEH560M50V V ,700 1,080 FEH820M50V , ,700 1,080 FEH101M50V , ,100 1,240 FEH121M50V , ,620 1,040 FEH181M50V , ,100 1,240 FEH221M50V x , ,250 1,00 FEH471M50V ,700 1,080 FEH470M63V ,900 1,160 FEH470M63V , ,700 1,080 FEH101M63V812 63V , ,700 1,080 FEH101M63V , ,900 1,160 FEH151M63V x , ,600 1,450 FEH221M63V x , ,570 1,428 FEH331M63V x , FEH100M100V , FEH150M100V x , FEH330M100V V , FEH330M100V , FEH470M100V x , FEH470M100V x , ,940 1,176 FEH101M100V1021 * Please contact us if the rating data of request item did not show in above.

7 8. Precaution for using capacitors a. Solid capacitors for D.C. application require polarization confirm the polarity before use. If used in reversed polarity, the circuit life may be shortened and the capacitor or other components may be damaged. To avoid capacitors exploding informally, we have developed "Case vent and Rubber vent" whenever the diameter is 8x11mm or over. b. Use the solid capacitors according to the specified operating temperature range, and do not apply voltage exceeding the specified capacitor voltage rating. c. The capacitance tolerance and D.F. should be tested at 120Hz, 25 C, the value of the leakage current should be measured at 25 C, with rated working voltage applied in specified time. d. For methods of testing the strength of lead wire and terminals, refer to the specified value of JIS-C5102 and IEC384 to avoid the inner or capacitors damaged. e. Do not place a soldering iron near or on the body of capacitor to avoid the sleeves of the capacitors deforming and cracking under high temperature. f. Do not use halogenated hydrocarbon solvent whenever soldering capacitors or cleaning the circuit board to avoid the inner of capacitors damaged. Please refer to following table when using. g. Be careful of temperature and time when soldering. Dipping must be performed at the soldering temperature or less than 260 C for less than 10 seconds otherwise the capacitors may be damaged. h. Capacitors should be stored at low temperature and low humidity to have longer storage time. If the storage period is too long, the capacitors should be charged before use. i. The specifications of products are according to characteristic (w) established JIS-C5141, IEC384. For methods of processing and testing refer to JIS-C5102 and IEC384.

Miniature Aluminum Electrolytic Ca pac i tors

Miniature Aluminum Electrolytic Ca pac i tors ULTRA LOW IMPEDANCE, RADIAL LEADS, POLARIZED, ALUMINUM ELEC TRO LYT IC FEATURES VERY LOW IMPEDANCE LONG LIFE AT 105 C (1000 ~ 5000 hrs.) HIGH STABILITY AT LOW TEMPERATURE IDEALLY FOR SWITCHING POWER SUPPLIES

More information

Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type

Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long

More information

tan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0

tan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0 Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant

More information

16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:

16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of: T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working

More information

For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k

For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal

More information

Large Can Aluminum Electrolytic Capacitors

Large Can Aluminum Electrolytic Capacitors FEATURES LONG LIFE AT +105 C (2,000 ~ 3,000 HOURS) HIGH RIPPLE CURRENT HIGH VOLTAGE (UP TO 500VDC) SUITABLE FOR SWITCHING POWER SUPPLIES SPECIFICATIONS *See System for Details Operating Temperature Range

More information

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR 1 Application Guidelines 1. Polarity CSCAP is solid aluminum electrolytic capacitors with positive and negative electrodes. Do not reverse the polarity when

More information

Snap-in Type Aluminium Electrolytic Capacitors

Snap-in Type Aluminium Electrolytic Capacitors Endurance: 85 2000hours Recommended Applications : Applying to switching power supply and other industry/ commercial field Corresponding product to RoHS SPECIFICATIONS Item Category Temperature Range -40~+85

More information

Summary of Specifications

Summary of Specifications Series Snap Mount Large High CV High Ripple RoHS Compliant 85 C Maximum Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life

More information

LPH Large Capacitance Aluminum Electrolytic Capacitors

LPH Large Capacitance Aluminum Electrolytic Capacitors Series LPH 105 C, Miniaturized, High-Reliability, High-Ripple Capacitors ULTRAMINI, HIGH RELIABLILITY TYPE Smaller-sized and higher-ripple than L3J. Guaranteed for 2000 hours at 105 C. Outline Drawing

More information

Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C

Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:

More information

LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS. (at 20 after 5 minutes) Dissipation Factor (tanδ) 420 & 450V 0.20

LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS. (at 20 after 5 minutes) Dissipation Factor (tanδ) 420 & 450V 0.20 from KMQ series Endurance with ripple : 2,000 to 3,000 hours at 105 Non solvent resistant type RoHS Compliant LXS P246 KMS P225 Downsized LXQ P249 KMM KMQ P215 SPECIFICATIONS Items Category Temperature

More information

DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents

DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents DATA SHEET Supersedes data of 18th January 2000 File under BCcomponents, BC01 2000 Apr 07 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case,

More information

SMM SERIES Engineering Bulletin Mar 07

SMM SERIES Engineering Bulletin Mar 07 Series SERIES Snap Mount Downsize High Long Life RoHS Compliant 85 C Maximum Temperature The series is a high voltage, long life snap-in capacitor series that offers downsized versions of the SMH series.

More information

Radial Aluminium Electrolytic Capacitors 105 C

Radial Aluminium Electrolytic Capacitors 105 C Radial Aluminium Electrolytic Capacitors 105 C Standard, miniaturized, Endurance 1.000h to 2.500h at 105 C Rated voltage range: 6,3V to 100V, Rated capacitance range: 0,47µF to 12.000µF range: Ø 5,5 x

More information

Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550

Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550 Standard capacitors Applications Frequency converters Uninterruptible power supplies All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Specifications

More information

ESC Aluminum Electrolytic Capacitors

ESC Aluminum Electrolytic Capacitors H Description S Capacitors for high frequency applications. H Applications S Computers switching regulator mother board output. H Features S Case with D 6.0 mm has the safety vent at the bottom. H Diagram

More information

Snap-in Type Aluminium Electrolytic Capacitors

Snap-in Type Aluminium Electrolytic Capacitors Endurance:105 3000 hours Recommended Applications : Smoothing circuit, TV/Monitor,Adapter, SMPS Corresponding product to RoHS Long Life LG SPECIFICATIONS Item Category Temperature Range Range Rated acitance

More information

55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A

55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:

More information

Aluminum Electrolytic Capacitor JNK

Aluminum Electrolytic Capacitor JNK FEATES Extended Lifetime at High ripple current High Professional Switch Mode Power Supplies Frequency Converters SPECIFICATIONS Items Performance Characteristics Operating Temperature Range ( ) -40 ~

More information

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. High frequency,low impedance. Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc.

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. High frequency,low impedance. Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc. S YD286 Series High frequency,low edance 105, 2000 hours Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc. Specifications: Item Characteristics Rated Voltage Range: 6.3V ~100VDC

More information

-40 to C 6.3 to 50 V.DC 22 to 6800 µ F ±20 % (120Hz/+20 C) I < 0.01 CV (µa) after 2 minutes application of rated working voltage at +20 C

-40 to C 6.3 to 50 V.DC 22 to 6800 µ F ±20 % (120Hz/+20 C) I < 0.01 CV (µa) after 2 minutes application of rated working voltage at +20 C Radial Type Series: FM Type :A n Features Low impedance(40 to 70% less than FC Series) Endurance : 2000 to 7000 hours at +105 C Country of Origin Japan Malaysia China n s Category temp. range Rated W.V.

More information

Surface Mount Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW

More information

Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life

Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple

More information

Radial Type Aluminium Electrolytic Capacitors

Radial Type Aluminium Electrolytic Capacitors SH Radial Type Aluminium Electrolytic acitors Endurance: 105 2000hours SH Recommended Applications :For high quality, reliability application, high CV product High Temperature Corresponding product to

More information

Aluminum Capacitors Power High Ripple Current Screw Terminals

Aluminum Capacitors Power High Ripple Current Screw Terminals 101/102 PHR-ST Aluminum Capacitors FEATURES ST STB Fig.1 Component outline Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated with a blue

More information

Surface Mount Aluminum Electrolytic Capacitors NACEW Series

Surface Mount Aluminum Electrolytic Capacitors NACEW Series FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage

More information

Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance

Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on

More information

K05 TYPE -40 C +105 C 5000H

K05 TYPE -40 C +105 C 5000H K05 TYPE -40 C +105 C 5000H Surge-proof capacitor in aluminium can with insulation sleeve Safety vent at bottom case or aside case. Snap in terminals for PCB mounting. Very high CV for unit volume with

More information

Technical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF

Technical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF www.niccomp.com/pcn Technical Support: tpmg@niccomp.com October 28 th 2016 SUB: EOL End of Life Notification Products impacted by this notice: NPC Series SMT Solid Polymer Aluminum Electrolytic Capacitors

More information

YAGEO Corporation Date: 01/17/2007

YAGEO Corporation Date: 01/17/2007 YAGEO Corporation Date: 01/17/2007 Aluminum Electrolytic Capacitors File:2063 Engineering Bulletin for SC Type Page: 1/7 SC Type -40 to +105 C Very low impedance and ESR, miniature aluminum electrolytic

More information

YAGEO Corporation Date: 2/22/2011

YAGEO Corporation Date: 2/22/2011 YAGEO Corporation Date: 2/22/2011 Aluminum Electrolytic Capacitors File:2052 Engineering Bulletin for SK Type Page: 1/29 SK Type +85ºC Single-ended lead aluminum electrolytic capacitors for the rated voltage

More information

Low ESR and High Frequency Radial Electrolytic Capacitor. TZE Series. Features. Applications. Dimensions (in mm)

Low ESR and High Frequency Radial Electrolytic Capacitor. TZE Series. Features. Applications. Dimensions (in mm) Low ESR and High Frequency Radial Electrolytic Capacitor Low ESR and High Frequency Radial Electrolytic Capacitor Features Radial leads, cylindrical aluminum case Low impedance and high frequency High

More information

YAGEO Corporation Date: 01/17/2007

YAGEO Corporation Date: 01/17/2007 YAGEO Corporation Date: 01/17/2007 Aluminum Electrolytic Capacitors File:2052 Engineering Bulletin for SK Type Page: 1/7 SK Type +85ºC Single-ended lead aluminum electrolytic capacitors for the rated voltage

More information

CapXon LD Series LD Series H Features Updated Series Preliminary Data Sheet Standard capacitors

CapXon LD Series LD Series H Features Updated Series Preliminary Data Sheet Standard capacitors Updated Series Preliminary Data Sheet 85 5000H Features Standard capacitors Applications Switch-mode power supplies in industrial and entertainmentelectronics Uninterruptible power supplies Features High

More information

APPLICATIONS Smart phone, Tablets, Notebook, LCD TV, Power supplies. P (0.081) 1.35 (0.050) 1.50 (0.059) max

APPLICATIONS Smart phone, Tablets, Notebook, LCD TV, Power supplies. P (0.081) 1.35 (0.050) 1.50 (0.059) max FEATURES Conductive polymer electrode Benign failure mode under recommended use conditions Lower 3x reflow 260 C compatible CV range: 0.47-470μF / 2.5-125V 18 case sizes available APPLICATIONS Smart phone,

More information

Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size

Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching

More information

Surface Mount Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING

More information

TMJ Tantalum SMD S1gma TM Series Capacitors

TMJ Tantalum SMD S1gma TM Series Capacitors The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely

More information

Surface Mount Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800μF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING

More information

X-CON CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

X-CON CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS X-CON CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS 2016-2017 Series Table P.3 Index Contents Index Series Chart P.3 Application Guidelines P.4 Part Number System P.8 Taping Specifications P.9 Lead Forming

More information

ALS30. ALS31 Stud Mounting

ALS30. ALS31 Stud Mounting 25 This range offers high CV per unit volume coupled with high ripple currents and long life performance. They are also capable of handling high peak voltages and currents. Capacitance range... 68µF to

More information

ALS40. ALS41 Stud Mounting

ALS40. ALS41 Stud Mounting 31 This range offers high CV per unit volume coupled with high ripple currents and long life performance at 105 C. They are also capable of handling high peak voltages and currents. Capacitance range...

More information

Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size

Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching

More information

W.V. (V) tan δ For capacitance value > 1000 µf, add 0.02 per every 1000 µf.

W.V. (V) tan δ For capacitance value > 1000 µf, add 0.02 per every 1000 µf. Radial Lead Type Series: FC Type: A Features Endurance : 105 C h to 5000 h Low impedance RoHS directive compliant Specifi cations Category Temp. Range 55 C to +105 C Rated Range 6.3 V.DC to 100 V.DC Nominal

More information

handbook, halfpage 059 PLL-SI 200 V, 250 V, 400 V, 450 V Category temperature range 25 to +105 C Endurance test at 105 C

handbook, halfpage 059 PLL-SI 200 V, 250 V, 400 V, 450 V Category temperature range 25 to +105 C Endurance test at 105 C FEATURES Polarized aluminium electrolytic capacitors, non-solid arge types, very small dimensions, cylindrical aluminium case, insulated with a blue sleeve Pressure relief on the top of the aluminium case

More information

Data Sheet. Aluminum electrolytic capacitors Alu-X product lines. Single-ended capacitors. Date: August 2008

Data Sheet. Aluminum electrolytic capacitors Alu-X product lines. Single-ended capacitors. Date: August 2008 Aluminum electrolytic capacitors Alu-X product lines Single-ended capacitors Series/Type: Data Sheet Date: August 2008 EPCOS AG 2008. Reproduction, publication and dissemination of this publication and

More information

handbook, halfpage lower RLL 116

handbook, halfpage lower RLL 116 FEATURES Polarized aluminium electrolytic capacitors, non-solid Radial leads, cylindrical aluminium case with pressure relief, insulated with a blue vinyl sleeve Charge and discharge proof Long useful

More information

Summary of Specifications

Summary of Specifications Miniature General Purpose Solvent Proof Large and Small 85 C Temperature Actual Size The series capacitors are a miniaturized version of the SME series. These capacitors are designed for a load life of,000

More information

Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V

Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V FEATURES Improved reliability 2x standard DCL reduced by 25% to 0.0075 CV Robust against higher thermo-mechanical stresses during assembly process CV range: 0.10-680μF / 4-50V 6 case sizes available 130

More information

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. I=0.01CV or 3(uA) after 2 minutes with rated working voltage

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. I=0.01CV or 3(uA) after 2 minutes with rated working voltage series +105,High ( ), Low ( ) FEATURES Load life:105 2000 ~4000hours Enabled high ripple current by a reduction of ESR at high frequency range switching power supply SPECIFICATIONS s Characteristics Category

More information

Aluminum Electrolytic Capacitors (Radial Lead Type)

Aluminum Electrolytic Capacitors (Radial Lead Type) Radial ead Type Series : FC Type : A Features : 105 C h to 5000 h ow impedance RoHS compliant Specifications Category temperature range 55 C to +105 C Rated voltage range 6.3 V.DC to 100 V.DC Capacitance

More information

CROSS-SECTION CONSTRUCTION

CROSS-SECTION CONSTRUCTION Skywell s OP-CON is aluminum solid electrolytic capacitor that uses organic semiconductors as electrolytes. Organic semiconductor has a high conductivity and high-temperature stability, therefore OP-CON

More information

FEATURES APPLICATIONS. High power DC/DC general applications MULTIANODE CONSTRUCTION

FEATURES APPLICATIONS. High power DC/DC general applications MULTIANODE CONSTRUCTION Tantalum Ultra Low Capacitor FEATURES Multi-anode construction Super low CV range: 10-2200μF / 2.5-50V 5 case sizes available Mirror multi-anode construction used with D, Y case capacitors reduces ESL

More information

Long life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options

Long life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options TS-HC Series 105 C, 2000 hours Long life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options RoHS Compliant Rated

More information

Surface Mount Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105

More information

FEATURES. SMD Style. Reflow soldering. Lead (Pb)-free APPLICATIONS. U R (V) x 5.8

FEATURES. SMD Style. Reflow soldering. Lead (Pb)-free APPLICATIONS. U R (V) x 5.8 ECV Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors SMD Style Miniature dimension Pb-free Available RoHS* COMPLIANT Extended temperature range: 105 C QUICK REFERENCE DATA DESCRIPTION

More information

CD 29H QH. highest current CD 296 KC. longer life. longer life miniaturized 125 C CD 892 ZL

CD 29H QH. highest current CD 296 KC. longer life. longer life miniaturized 125 C CD 892 ZL CD 29H QH Series 5 000h at Long Useful Life Highest Ripple Current Miniaturized Industrial Power Supplies and Inverters CD 294 BW longer life CD 29H QH highest current CD 299 PG CD 296 KC CD 297 BB longer

More information

Wet Tantalum Tubular Capacitors

Wet Tantalum Tubular Capacitors Castanet Tantalum Capacitors Wet Tantalum Tubular Capacitors CECC & ESA Axial & Surface Mount MIL-PRF-39006C Axial DSCC Drawing 93026 Axial High Temperature 200 C Axial & Surface Mount 150 Volt Rated Axial

More information

Tantalum Chip Capacitors

Tantalum Chip Capacitors FEATURES EXPANDED VALUE RANGE & REDUCED CASE SIZES MOLDED CONSTRUCTION FOR HIGH SOLDERING HEAT RESISTANCE ELEVEN CASE SIZES (J, P, A2, A, B2, B, C2, C, V, D AND E) BOTH FLOW AND REFLOW SOLDERING APPLICABLE

More information

Aluminum Capacitors, Power High Ripple Current, Screw Terminals

Aluminum Capacitors, Power High Ripple Current, Screw Terminals Aluminum Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic capacitors,

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved capacitance retention at high frequencies.

More information

Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature

Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, insulated with a blue

More information

MTB. MKT box with radial terminals small size general purpose. Ed. 04 Rev Dissipation factor (DF), max. tgδ x10-4, measured at 25 ±5 C

MTB. MKT box with radial terminals small size general purpose. Ed. 04 Rev Dissipation factor (DF), max. tgδ x10-4, measured at 25 ±5 C Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low pulse operation Dielectric Polyester Electrodes Vacuum

More information

Aluminum Capacitors Power Ultra Long Life Snap-In

Aluminum Capacitors Power Ultra Long Life Snap-In 059 PLL-SI QUICK REFERENCE DATA DESCRIPTION Nominal case size (Ø D x L in mm) Fig.1 Component outlines 159 miniaturized 85 C PUL-SI VALUE 22 x 25 to 35 x 60 157 PUM-SI Rated capacitance range (E6/E12 series),

More information

Aluminum Capacitors Power High Ripple Current Snap-In

Aluminum Capacitors Power High Ripple Current Snap-In Aluminum Capacitors 198 PHR-SI 057 PSM-SI smaller dimensions Fig. 1 Component outlines 198 PHR-SI QUICK REFERENCE DATA longer life higher ripple 157 PUM-SI DESCRIPTION VALUE Nominal case size (Ø D x L

More information

Type 381LX / 383LX 105 C High Ripple, Snap-In Aluminum High Ripple, Long Life, 2, 4 and 5 pin styles available

Type 381LX / 383LX 105 C High Ripple, Snap-In Aluminum High Ripple, Long Life, 2, 4 and 5 pin styles available High Ripple, Long Life, 2, 4 and 5 pin styles available Specifications Temperature Range Rated Voltage Range Adding longer-life and more ripple capability to the excellent value of Type 380L/LX capacitors,

More information

MSB Metallized polyester film capacitor MKT - High performance

MSB Metallized polyester film capacitor MKT - High performance Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor run applications. Low power switching applications. Low pulse operation

More information

STANDARD CASE DIMENSIONS: millimeters (inches) W 1 dimension applies to the termination width for A dimensional area only.

STANDARD CASE DIMENSIONS: millimeters (inches) W 1 dimension applies to the termination width for A dimensional area only. L W FEATURES Non-burn safe technology Reliability level: 0.5%/1000 hours at 85ºC 13 case sizes available, standard and low profile Environmentally friendly, RoHS Compliant CV range: 2.2-1000μF / 1.8-10V

More information

FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications

FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications Low - Automotive Product Range FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.22-680μF / 6.3-50V 5 case sizes available Power supply applications APPLICATIONS Power Supply

More information

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0 Product Specification March 7, 2017 V.16 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 100 nf RoHS compliant & Halogen Free Product specification

More information

Electrolytic Capacitors

Electrolytic Capacitors Electrolytic Capacitors WWW.FTCAP.DE // Electrolytic Capacitors Aluminum Electrolytic Capacitors Series Design Application Page A Axial leaded, 85 C 9 Series Design Application Page SIG Snap-in, 125 C

More information

KMG Series. Miniature General Purpose Solvent Proof 105 C Maximum Temperature

KMG Series. Miniature General Purpose Solvent Proof 105 C Maximum Temperature Miniature General Purpose Solvent Proof 5 C Temperature The series capacitors are designed for general purpose use with an operating temperature range for most of these capacitors from 55 C to 5 C. The

More information

Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V

Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V FEATURES Improved reliability 2x standard reduced by 25% to 0.0075 CV Robust against higher thermo-mechanical stresses during assembly process CV range: 0.10-680μF / 4-50V 6 case sizes available 130 low

More information

Japan Malaysia China. Frequency(Hz) k 10k 100k 1.0 to φ10. ( 6.3mm dia) Vent P±0.5

Japan Malaysia China. Frequency(Hz) k 10k 100k 1.0 to φ10. ( 6.3mm dia) Vent P±0.5 Radial Lead Type Series: FC Type :A Features Endurance : 5 C 00 h to 5000 h Low impedance Japan Malaysia China Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance

More information

Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES

Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES CASE DIMENSIONS: millimeters (inches) Code H, K, L, O, S, T, X CASE 156 J XXXXX 156 = 15µF ID Code HO TO ORDER TCN L 157 FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode

More information

CMK Metallized polycarbonate CECC approval, detail specification According to CECC 30500, IEC 384-6

CMK Metallized polycarbonate CECC approval, detail specification According to CECC 30500, IEC 384-6 Metallized polycarbonate CECC approval, detail specification 30501-020 According to CECC 30500, IEC 384-6 TYPICAL APPLICATIONS Automotive and other applications in high ambient temperatures. Stable filters,

More information

SIG Snap-in, 125 C 65 GSH GSG LFH. MDK Motor start 105. MEK Motor start 107. E-Type Flash capacitors 109

SIG Snap-in, 125 C 65 GSH GSG LFH. MDK Motor start 105. MEK Motor start 107. E-Type Flash capacitors 109 Series Design Application Page Series Design Application Page A Axial leaded, 85 C 9 SIG Snap-in, 125 C 65 AH Axial leaded, 105 C 13 GS DIN terminals, 85 C 69 AG Axial leaded, 125 C 17 GSH DIN terminals,

More information

4.0±0.5 (3.5) Top of spin. Standard terminal type does not require terminal trimming peocess.

4.0±0.5 (3.5) Top of spin. Standard terminal type does not require terminal trimming peocess. Snap-in Type Series: HC Type: TS Features 30 % smaller than series TS-HB RoHS directive compliant Specifi cations Category Temp. Range 40 C to +105 C 25 C to +105 C Rated Range 10 V.DC to 100 V.DC 160

More information

part of the EVOX RIFA GROUP

part of the EVOX RIFA GROUP part of the EVOX RIFA GROUP 17 series Listed here are only samples of the range of Screw Terminal Capacitors we can produce. Electrical characteristics and case size are just two parameters that can be

More information

Data Sheet. Aluminum electrolytic capacitors Alu-X product lines. Snap-in capacitors. Date: April 2008

Data Sheet. Aluminum electrolytic capacitors Alu-X product lines. Snap-in capacitors. Date: April 2008 Aluminum electrolytic capacitors Alu-X product lines Snap-in capacitors Series/Type: Data Sheet Date: April 2008 EPCOS AG 2008. Reproduction, publication and dissemination of this publication and the information

More information

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R Product Specification May 31, 2016 V.14 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product

More information

Data Sheet. Aluminum electrolytic capacitors Alu-X product lines. Snap-in capacitors. Date: April 2008

Data Sheet. Aluminum electrolytic capacitors Alu-X product lines. Snap-in capacitors. Date: April 2008 Aluminum electrolytic capacitors Alu-X product lines Snap-in capacitors Series/Type: Data Sheet Date: April 2008 EPCOS AG 2008. Reproduction, publication and dissemination of this publication and the information

More information

Size code Rated W.V. Cap. change. 4 W.V to 50 W.V. 6.3 W.V > 10 W.V 1000 hours ±20 % < 200 % initial specifi ed value

Size code Rated W.V. Cap. change. 4 W.V to 50 W.V. 6.3 W.V > 10 W.V 1000 hours ±20 % < 200 % initial specifi ed value Surface Mount Type Series: S Type: V Features Endurance: 85 C 2000 h Vibration-proof product is available upon request. (φ8 mm and larger) RoHS directive compliant s Category Temp. Range 40 C to +85 C

More information

Standard and Low Profile Tantalum Microchip Capacitors. STANDARD CASE DIMENSIONS: millimeters (inches)

Standard and Low Profile Tantalum Microchip Capacitors. STANDARD CASE DIMENSIONS: millimeters (inches) FEATURES The world s smallest surface mount tantalum capacitor CV range: 0.10-150μF / 2-25V 11 case sizes available, standard and low profile APPLICATIONS Hearing Aids, Non-life support medical, Long life

More information

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R Product Specification October 27, 16 V.15 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free

More information

Aluminum Electrolytic Capacitors Radial Very Low Impedance

Aluminum Electrolytic Capacitors Radial Very Low Impedance Aluminum Electrolytic Capacitors Radial Very Low Impedance FEATURES Very low impedance and low ESR Very long useful life: 4000 h to 0 000 h at 05 C, very high reliability Excellent ripple current capability

More information

THZ NEW - In Progress

THZ NEW - In Progress Main applications AC power applications, input-output AC filtering, harsh environment applications Dielectric Polypropylene Electrodes Vacuum deposited metal layers Coating Solvent resistant plastic case

More information

ST SERIES Drawing No. SC-ARY1816 Page 2 / 5

ST SERIES Drawing No. SC-ARY1816 Page 2 / 5 1. Scope This specification is for aluminum electrolytic capacitors. 2. Applicable standards KS C 6421(W), KS C 6035, except as specified in this specification 3. Operating temperature range -25 +85 4.

More information

P-Series 11 to to to to to to to 1100 >1000 <25

P-Series 11 to to to to to to to 1100 >1000 <25 Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics

More information

Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES

Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode Benign failure mode under recommended use conditions Lower Undertab terminations layout: - High Volumetric Efficiency

More information

CD 299 PG. highest current. longer life CD 297 BB. miniaturized CD 892 ZL Z -40 C

CD 299 PG. highest current. longer life CD 297 BB. miniaturized CD 892 ZL Z -40 C CD 297 BB Series 7 000h at Extended Lifetime at High High Professional Switch Mode Power Supplies Frequency Converters CD 29H QH CD 296 KC larger size highest current longer life miniaturized CD 299 PG

More information

Product Specification

Product Specification 1.0 SCOPE This document contains specific electrical, mechanical, and environmental requirements and specifications for double- sealed, axial- leaded hybrid capacitors. 2.0 CONSTRUCTION 2.1 General The

More information

Overview. Benefits. One world. One KEMET

Overview. Benefits. One world. One KEMET T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 63 VDC Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable

More information

VZCA2.E VZCA8.E CQC CQC CQC CQC CQC D-Seires. 11 to to 1465.

VZCA2.E VZCA8.E CQC CQC CQC CQC CQC D-Seires. 11 to to 1465. Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics

More information

Configuration. Specification: Capacitance Range. Insulation Resistance. Maximum Pulse Rise Time(V/μsec.): Shown As Following Table.

Configuration. Specification: Capacitance Range. Insulation Resistance. Maximum Pulse Rise Time(V/μsec.): Shown As Following Table. Metallized Polyester Film s (Radial Dipped) Configuration FEATURES Self healing characteristics. Miniature size, light in weight. High stability of temperature vs. Cap. and tanδ. High density thermosetting

More information

MPPB Series. Metallized Polypropylene Film Capacitor Box type. Metallized Polypropylene Film Capacitor - Box type Features. Typical Applications

MPPB Series. Metallized Polypropylene Film Capacitor Box type. Metallized Polypropylene Film Capacitor - Box type Features. Typical Applications Metallized Polypropylene Film Capacitor - Box type Features Metallized polypropylene structure Low loss at high frequency Small inherent temperature rise Plastic case (UL94 V-0), Epoxy resin sealing RoHS

More information

Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.

Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm. Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term

More information

FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications

FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications Low - Automotive Product Range FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.22-680μF / 6.3-50V 5 case sizes available Power supply applications APPLICATIONS Power Supply

More information

Contents CORNELL DUBILIER

Contents CORNELL DUBILIER Contents Products Listed by Type Designation........................................................ Chip and SMT Selector Guide................................................................... 1.001

More information