Low ESR and High Frequency Radial Electrolytic Capacitor. TZE Series. Features. Applications. Dimensions (in mm)
|
|
|
- Reynard George
- 6 years ago
- Views:
Transcription
1 Low ESR and High Frequency Radial Electrolytic Capacitor Low ESR and High Frequency Radial Electrolytic Capacitor Features Radial leads, cylindrical aluminum case Low impedance and high frequency High permissible ripple current at high frequency and High operation temperature (-40 ~ +105 C) Life time: 1000 to 3000 hours at 105 C RoHS compliant Applications Switching regulator of computer, especially for high frequency Dimensions (in mm) фd P фd /1.0* a L Refer to below table Case Size & Rated Ripple Current & Max. Impedance Note: *фd=1.0mm when L 40mm. TAITRON COMPONENTS INCORPORATED Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) Page 1 of 7
2 Specification Description Value Conditions Operation Temperature Range -40 ~ +105 C Rated Voltage Range (WV) Rated Capacitance Range 6.3 ~ 100VDC 4.7 ~ uf Capacitance Tolerance ±20% at 120Hz, 20 C Max. Leakage current at 20 C I 0.01 CV or 3 µa, whichever is greater (I= Leakage Current(uA), C=Nominal Capacitance, V=Rated Voltage(V)) After 2 minutes applied rated voltage Working Voltage (V) Surge Voltage (V) at 20 C Max. Dissipation Factor tan δ * Max. Low Temperature Stability Impedance Ratio at 120Hz at 20 C, 120Hz Z(-25 C)/ Z(+20 C) Z(-40 C)/ Z(+20 C) Load Life Change Dissipation Factor Leakage Current Within ±20% of the initial value 200% of specified value initial specified value After rated voltage with ripple current applied for 3000 hours at 105 C ** Shelf Life Shall meet the same requirement as load life test After placed at 105 C without voltage applied for 1000 hours Note: 1. * when nominal capacitance is over 1000uF, tan δ shall be added 0.02 to the list value with increase of every 1000uF; 2. * * If dimension is from 5x11 ~ 10x12.5, Load life is 2000 hours; If dimension is over 10x15, Load life is 3000 hours; If dimension is down size, Load life will be less 1000 hours than standard. Ripple Current Multiplier Frequency coefficient Capacitance Freq. (HZ) K 10K 100K 4.7 uf ~ 33 uf ~ 330 uf ~ 1000 uf uf Page 2 of 7
3 Case Size & Rated Ripple Current & Max. Impedance 6.3 (8) 10 (13) 16 (20) 25 (32) 10 5x x x x x x x x x x x x x x x x x x x x11* x15* x11* x11* x x11* x15* x x x x x x11* x11* x15* x20* x x x x12.5* x x11* x11* x x x x x x x x x11* x x16* x20* x15* x12.5* x x25* x x x x x x x x25* x x Page 3 of 7
4 6.3 (8) 10 (13) 16 (20) 25 (32) 8x15* x x20* x30* x20* x x x16* x x20* x20* x30* x30* x25* x25* x20* x25* x x x x x25* x30* x40* x36* x x x x x x30* x25* x x x25* x x x x x x x x x x (44) 50 (63) 63 (79) 100 (125) 4.7 5x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x11* x11* x x x x x x x x x x x x Page 4 of 7
5 35 (44) 50 (63) 63 (79) 100 (125) x15* x x x x x x16* x x x x x x20* x x x x x x x x x x x x x x x x x x x32* x x x Note: 1. Case Size: фd x L (mm); 2. Ripple Current: (ma/rms), 105 C, 100KHZ; 3. Impedance: Ω, 20 C, 100KHZ; 4. * is down size, Load Life is less 1000 hours than standard. Page 5 of 7
6 How to Order TZE 22 M 35 CF XX-AR Packing Code AR: Ammo Pack, RoHS, PVC Sleeve BL: Bulk Pack, RoHS, PVC Sleeve AG: Ammo Pack, RoHS+HF, PET Sleeve BG: Bulk Pack, RoHS+HF, PET Sleeve Factory Location Code Lead Space Code (Optional for taping pitch) -000: natural space; -100: 0.1 (2.5mm); -200: 0.2 (5.0mm); -300: 0.1 (7.5mm); Case Code, see case code table Diameter & Length Rated Voltage Capacitance Tolerance M: ±20% Capacitance (in µf) Taitron Radial-Leaded Low ESR and High Frequency E-cap Case code table Diameter (mm) Code C E F G H J K L M N Length (mm) Code F J L M Q T Y AA EE HH Page 6 of 7
7 How to contact us USA HEADQUARTERS WEST HARRISON PARKWAY, VALENCIA, CA Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) TAITRON COMPONENTS INCORPORATED TAIWAN BRANCH 6F., NO.190, SEC. 2, ZHONGXING RD., XINDIAN DIST., NEW TAIPEI CITY 23146, TAIWAN R.O.C. Tel: Fax: TAITRON COMPONENT TECHNOLOG SHANGHAI CORPORATION SUITE 1503, METROBANK PLAZA, 1160 WEST YAN AN ROAD, SHANGHAI, , CHINA Tel: Fax: Page 7 of 7
MPPB Series. Metallized Polypropylene Film Capacitor Box type. Metallized Polypropylene Film Capacitor - Box type Features. Typical Applications
Metallized Polypropylene Film Capacitor - Box type Features Metallized polypropylene structure Low loss at high frequency Small inherent temperature rise Plastic case (UL94 V-0), Epoxy resin sealing RoHS
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812 Wire Wound Chip Inductor (Ferrite) - Standard Features Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate
Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type
Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long
1.0A Low Profile Chip Schottky Rectifier TSCD12WSH-TSCD16WSH. Features. Application. Mechanical Data
1.0A Low Profile Chip Schottky Rectifier 1.0A Low Profile Chip Schottky Rectifier Features Lead less chip form, no lead damage Low profile with SMD package Low power loss, High efficiency High current
RWW S2W RWW 2W RWW S3W 1/4 1/2 1/ W V
Axial Round Wirewound Resistor Normal & Miniature Style Series Axial Round Wirewound Resistor Normal & Miniature Style Features Low cost, high performance, excellent long-term stability Wide resistance
Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
Snap-in Type Aluminium Electrolytic Capacitors
Endurance: 85 2000hours Recommended Applications : Applying to switching power supply and other industry/ commercial field Corresponding product to RoHS SPECIFICATIONS Item Category Temperature Range -40~+85
16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:
T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working
Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
Aluminum Electrolytic Capacitor JNK
FEATES Extended Lifetime at High ripple current High Professional Switch Mode Power Supplies Frequency Converters SPECIFICATIONS Items Performance Characteristics Operating Temperature Range ( ) -40 ~
For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k
T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal
Miniature Aluminum Electrolytic Ca pac i tors
ULTRA LOW IMPEDANCE, RADIAL LEADS, POLARIZED, ALUMINUM ELEC TRO LYT IC FEATURES VERY LOW IMPEDANCE LONG LIFE AT 105 C (1000 ~ 5000 hrs.) HIGH STABILITY AT LOW TEMPERATURE IDEALLY FOR SWITCHING POWER SUPPLIES
Radial Type Aluminium Electrolytic Capacitors
SH Radial Type Aluminium Electrolytic acitors Endurance: 105 2000hours SH Recommended Applications :For high quality, reliability application, high CV product High Temperature Corresponding product to
Snap-in Type Aluminium Electrolytic Capacitors
Endurance:105 3000 hours Recommended Applications : Smoothing circuit, TV/Monitor,Adapter, SMPS Corresponding product to RoHS Long Life LG SPECIFICATIONS Item Category Temperature Range Range Rated acitance
Thick Film Arrray Chip Resistor RP164PJxxx Series
Thick Film Arrray Chip Resistor Array Chip Resistor 4 Element 0603 Convex Types Features Convex Termination Less board space than individual chip resistors Cost reduction efficiency by eliminating mounter
55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A
Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:
DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents
DATA SHEET Supersedes data of 18th January 2000 File under BCcomponents, BC01 2000 Apr 07 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case,
-40 to C 6.3 to 50 V.DC 22 to 6800 µ F ±20 % (120Hz/+20 C) I < 0.01 CV (µa) after 2 minutes application of rated working voltage at +20 C
Radial Type Series: FM Type :A n Features Low impedance(40 to 70% less than FC Series) Endurance : 2000 to 7000 hours at +105 C Country of Origin Japan Malaysia China n s Category temp. range Rated W.V.
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. High frequency,low impedance. Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc.
S YD286 Series High frequency,low edance 105, 2000 hours Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc. Specifications: Item Characteristics Rated Voltage Range: 6.3V ~100VDC
Large Can Aluminum Electrolytic Capacitors
FEATURES LONG LIFE AT +105 C (2,000 ~ 3,000 HOURS) HIGH RIPPLE CURRENT HIGH VOLTAGE (UP TO 500VDC) SUITABLE FOR SWITCHING POWER SUPPLIES SPECIFICATIONS *See System for Details Operating Temperature Range
tan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0
Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant
Surface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
TSPB008A-TSPB350C. SMD Thyristor Surge Protector. Features. Applications. Mechanical Data
SMD Thyristor Surge Protector Features Low Capacitance for T1/E1 Trunk and Line Card Application High Surge Capability Peak Off-State from 6 to 320 volts Symmetrical Characteristics Glass Passivated Chip
Radial Aluminium Electrolytic Capacitors 105 C
Radial Aluminium Electrolytic Capacitors 105 C Standard, miniaturized, Endurance 1.000h to 2.500h at 105 C Rated voltage range: 6,3V to 100V, Rated capacitance range: 0,47µF to 12.000µF range: Ø 5,5 x
Technical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF
www.niccomp.com/pcn Technical Support: tpmg@niccomp.com October 28 th 2016 SUB: EOL End of Life Notification Products impacted by this notice: NPC Series SMT Solid Polymer Aluminum Electrolytic Capacitors
Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550
Standard capacitors Applications Frequency converters Uninterruptible power supplies All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Specifications
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
Summary of Specifications
Miniature General Purpose Solvent Proof Large and Small 85 C Temperature Actual Size The series capacitors are a miniaturized version of the SME series. These capacitors are designed for a load life of,000
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice. 1. Features Ultra Low & high ripple
KMG Series. Miniature General Purpose Solvent Proof 105 C Maximum Temperature
Miniature General Purpose Solvent Proof 5 C Temperature The series capacitors are designed for general purpose use with an operating temperature range for most of these capacitors from 55 C to 5 C. The
Long life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options
TS-HC Series 105 C, 2000 hours Long life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options RoHS Compliant Rated
handbook, halfpage lower RLL 116
FEATURES Polarized aluminium electrolytic capacitors, non-solid Radial leads, cylindrical aluminium case with pressure relief, insulated with a blue vinyl sleeve Charge and discharge proof Long useful
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
The LD2940 is a low dropout three-terminal regulator with a typical dropout of 280mV at 1A output current.
1A Ultra Low Dropout Voltage Regulator 1A Ultra Low Dropout Voltage Regulator General Description The LD2940 is a low dropout three-terminal regulator with a typical dropout of 280mV at 1A output current.
Multilayer Chip Inductor High Frequency LCH LCH0603. Features. Applications. Constructions and Dimensions
Multilayer Chip Inductor High Frequency Multilayer Chip Inductor High Frequency Features A ceramic material construction for high frequency application to 10GHZ Tight tolerance physical dimensions(+/-0.05mm)
LPH Large Capacitance Aluminum Electrolytic Capacitors
Series LPH 105 C, Miniaturized, High-Reliability, High-Ripple Capacitors ULTRAMINI, HIGH RELIABLILITY TYPE Smaller-sized and higher-ripple than L3J. Guaranteed for 2000 hours at 105 C. Outline Drawing
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. I=0.01CV or 3(uA) after 2 minutes with rated working voltage
series +105,High ( ), Low ( ) FEATURES Load life:105 2000 ~4000hours Enabled high ripple current by a reduction of ESR at high frequency range switching power supply SPECIFICATIONS s Characteristics Category
ESC Aluminum Electrolytic Capacitors
H Description S Capacitors for high frequency applications. H Applications S Computers switching regulator mother board output. H Features S Case with D 6.0 mm has the safety vent at the bottom. H Diagram
Summary of Specifications
Series Snap Mount Large High CV High Ripple RoHS Compliant 85 C Maximum Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life
SMM SERIES Engineering Bulletin Mar 07
Series SERIES Snap Mount Downsize High Long Life RoHS Compliant 85 C Maximum Temperature The series is a high voltage, long life snap-in capacitor series that offers downsized versions of the SMH series.
Contents CORNELL DUBILIER
Contents Products Listed by Type Designation........................................................ Chip and SMT Selector Guide................................................................... 1.001
Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size
Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching
Aluminum Capacitors Power High Ripple Current Screw Terminals
101/102 PHR-ST Aluminum Capacitors FEATURES ST STB Fig.1 Component outline Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated with a blue
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS. (at 20 after 5 minutes) Dissipation Factor (tanδ) 420 & 450V 0.20
from KMQ series Endurance with ripple : 2,000 to 3,000 hours at 105 Non solvent resistant type RoHS Compliant LXS P246 KMS P225 Downsized LXQ P249 KMM KMQ P215 SPECIFICATIONS Items Category Temperature
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105
Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size
Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800μF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Summary of Specifications
Series Large Can Screw Terminals High Ripple 6.3 to 400VDC Range Dimensions in Inches RoHS Compliant 105 C Maximum Temperature The series allows for extremely high ripple currents for applications such
U36D SERIES Engineering Bulletin Mar 07
Series SERIES Large Can Screw Terminals High Ripple Up to 550VDC Dimensions in Inches RoHS Compliant 85 C Maximum Temperature The series is ideal for inverter applications requiring high ripple current
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR 1 Application Guidelines 1. Polarity CSCAP is solid aluminum electrolytic capacitors with positive and negative electrodes. Do not reverse the polarity when
Type 381EL 105 ºC Ultra-Long Life Snap-In, Aluminum More than 100,000 Hours Operation at 65 C and Rated 105 C Ripple OBSOLETE
Specifications Temperature Range Rated Voltage Range 160 to 450 Vdc Capacitance Range 39 µf to 2,200 µf ± 20% Capacitance Tolerance ± 20% Leakage Current Ripple Current Multipliers The new 381EL extends
Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature
Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, insulated with a blue
CROSS-SECTION CONSTRUCTION
Skywell s UNI-CON is aluminum solid electrolytic capacitor that uses organic semiconductors as electrolytes. Organic semiconductor has a high conductivity and high-temperature stability, therefore UNI-CON
K05 TYPE -40 C +105 C 5000H
K05 TYPE -40 C +105 C 5000H Surge-proof capacitor in aluminium can with insulation sleeve Safety vent at bottom case or aside case. Snap in terminals for PCB mounting. Very high CV for unit volume with
handbook, halfpage 059 PLL-SI 200 V, 250 V, 400 V, 450 V Category temperature range 25 to +105 C Endurance test at 105 C
FEATURES Polarized aluminium electrolytic capacitors, non-solid arge types, very small dimensions, cylindrical aluminium case, insulated with a blue sleeve Pressure relief on the top of the aluminium case
Type 381LX / 383LX 105 C High Ripple, Snap-In Aluminum High Ripple, Long Life, 2, 4 and 5 pin styles available
High Ripple, Long Life, 2, 4 and 5 pin styles available Specifications Temperature Range Rated Voltage Range Adding longer-life and more ripple capability to the excellent value of Type 380L/LX capacitors,
Aluminum Electrolytic Capacitors Radial Very Low Impedance
Aluminum Electrolytic Capacitors Radial Very Low Impedance FEATURES Very low impedance and low ESR Very long useful life: 4000 h to 0 000 h at 05 C, very high reliability Excellent ripple current capability
Type 380LX / 382LX 85 C High Capacitance, Snap-In Aluminum
The excellent value of Type 380L/LX capacitors finds application in switching power supply input and output circuits and even motor drives where the high surface area of multiple units in parallel approaches
CROSS-SECTION CONSTRUCTION
Skywell s OP-CON is aluminum solid electrolytic capacitor that uses organic semiconductors as electrolytes. Organic semiconductor has a high conductivity and high-temperature stability, therefore OP-CON
YAGEO Corporation Date: 01/17/2007
YAGEO Corporation Date: 01/17/2007 Aluminum Electrolytic Capacitors File:2063 Engineering Bulletin for SC Type Page: 1/7 SC Type -40 to +105 C Very low impedance and ESR, miniature aluminum electrolytic
Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial ead Type Series : FC Type : A Features : 105 C h to 5000 h ow impedance RoHS compliant Specifications Category temperature range 55 C to +105 C Rated voltage range 6.3 V.DC to 100 V.DC Capacitance
Country of Origin. Standard. -40 to + 85 C 6.3 to 100 V.DC 0.1 to µ F ±20 % (120Hz/+20 C) Please see the attached standard products list
= Radial Lead Type M Series: Type : n Features A Endurance:85 C 2000 h Smaller than series SU RoHS directive compliant Standard Country of Origin Japan Malaysia China n Specifications Category temp.range
Summary of Specifications
Series Large Can Screw Terminal 85 C General Purpose High Ripple Current Capability Extended Range to 550VDC Dimensions in Inches The series is ideal for inverter applications requiring high ripple current
Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial ead Type Series : M Type : A Features Smaller than series SU RoHS compliant Specifications Category temperature range 40 C to + 85 C 25 C to +85 C range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC
W.V. (V) tan δ For capacitance value > 1000 µf, add 0.02 per every 1000 µf.
Radial Lead Type Series: FC Type: A Features Endurance : 105 C h to 5000 h Low impedance RoHS directive compliant Specifi cations Category Temp. Range 55 C to +105 C Rated Range 6.3 V.DC to 100 V.DC Nominal
MIL-PRF Series. Military Conventional Wet Tantalum OUTLINE DIMENSIONS. CASE DIMENSIONS: millimeters (inches)
This data sheet contains the MIL-PRF-39006 ratings for which AVX is a qualified approved supplier. This will be continually updated as the qualification expands. For COTS-Plus equivalent ratings please
SWITCH-MODE CERAMIC CAPACITORS
Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and
Data Sheet. Aluminum electrolytic capacitors Alu-X product lines. Single-ended capacitors. Date: August 2008
Aluminum electrolytic capacitors Alu-X product lines Single-ended capacitors Series/Type: Data Sheet Date: August 2008 EPCOS AG 2008. Reproduction, publication and dissemination of this publication and
Aluminum Capacitors Power High Ripple Current Snap-In
Aluminum Capacitors 198 PHR-SI 057 PSM-SI smaller dimensions Fig. 1 Component outlines 198 PHR-SI QUICK REFERENCE DATA longer life higher ripple 157 PUM-SI DESCRIPTION VALUE Nominal case size (Ø D x L
Overview. Applications. Benefits. Part Number System. Ordering Options Table. Snap-In Aluminum Electrolytic Capacitors ELG Series, 105ºC
Snap-In Aluminum Electrolytic Capacitors ELG Series, 105ºC Overview KEMET's ELG Series of aluminum electrolytic snap-in capacitors are designed with snap-lock terminals for printed circuit board mounting.
Applications. Rated Voltage (VDC) 100 = = = = = = = = 500
Single-Ended Aluminum Electrolytic Capacitors ESK Series, +85 C Overview Applications KEMET s ESK Series of single-ended aluminum electrolytic capacitors are designed for high-density printed circuit boards
CapXon LD Series LD Series H Features Updated Series Preliminary Data Sheet Standard capacitors
Updated Series Preliminary Data Sheet 85 5000H Features Standard capacitors Applications Switch-mode power supplies in industrial and entertainmentelectronics Uninterruptible power supplies Features High
Resin-Coated, Radial-Leaded Solid Tantalum Capacitors
FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*
Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
Applications. Rated Voltage (VDC) 100 = = = = = = = = 500
Single-Ended Aluminum Electrolytic Capacitors ESK Series, +85ºC Overview Applications KEMET s ESK Series of single-ended aluminum electrolytic capacitors are designed for high-density printed circuit boards
Size code Rated W.V. Cap. change. 4 W.V to 50 W.V. 6.3 W.V > 10 W.V 1000 hours ±20 % < 200 % initial specifi ed value
Surface Mount Type Series: S Type: V Features Endurance: 85 C 2000 h Vibration-proof product is available upon request. (φ8 mm and larger) RoHS directive compliant s Category Temp. Range 40 C to +85 C
Applications PEG124 E F Q T1
Axial Aluminum Electrolytic Capacitors PEG124 Series, +105ºC and +125ºC Overview KEMET's PEG124 is an electrolytic capacitor with very longlife and outstanding electrical performance. The device has a
Applications. Rated Voltage (VDC) 160 = = = = = = = = 500
Single-Ended Aluminum Electrolytic Capacitors ESH Series, +105ºC Overview Applications KEMET s ESH Series of single-ended aluminum electrolytic capacitors offer high CV and are designed for high quality,
FEATURES. SMD Style. Reflow soldering. Lead (Pb)-free APPLICATIONS. U R (V) x 5.8
ECV Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors SMD Style Miniature dimension Pb-free Available RoHS* COMPLIANT Extended temperature range: 105 C QUICK REFERENCE DATA DESCRIPTION
Applications. Rated Voltage (VDC) 160 = = = = = = = = 500
Single-Ended Aluminum Electrolytic Capacitors ESH, +105 C Overview Applications The KEMET ESH single-ended aluminum electrolytic capacitors offer high CV and are designed for high quality, high reliability
Aluminum Capacitors Power Ultra Long Life Snap-In
059 PLL-SI QUICK REFERENCE DATA DESCRIPTION Nominal case size (Ø D x L in mm) Fig.1 Component outlines 159 miniaturized 85 C PUL-SI VALUE 22 x 25 to 35 x 60 157 PUM-SI Rated capacitance range (E6/E12 series),
Type CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor
High CV, Screw Terminal Capacitors Specifcations Type CGS screw terminal, aluminum electrolytic capacitors have a high CV rating and are suitable for use in most demanding applications requiring high current
Frequency (Hz) 50, k 10 k to Correction factor min. 3 min.
Radial Lead Type Series: M Type: A Features Smaller than series SU RoHS directive compliant Specifi cations Category Temp. Range 40 C to + 85 C 25 C to +85 C Rated Range 6.3 V.DC to 100 V.DC 160 V.DC to
6.3 W.V < D(06.3) Miniature > 10 W.V 1000 hours ±20 %
Surface Mount Type Series: S Type: V Features Endurance: 85 C 2000 h Vibration-proof product is available upon request. (08 mm and larger) AEC-Q200 qualifi ed RoHS directive compliant s Category Temp.
TANCAP TECHNOLOGY CO., LTD.
TB SERIES FEATURES - Capacitance : 0.1uF to 330uF - Current Test on Each Size - Capacitance Tolerance: ±5%(K), ±10%(K), ±20%(M) - Voltage : 4V DC to 50V DC CASE DIMENSIONS AND MARKINGS Forming C : 2. Forming
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on
Applications. Rated Voltage (VDC) 160 = = = = = = = = = = = 100
Single-Ended Aluminum Electrolytic Capacitors ESL +105 C Overview Applications KEMET s ESL aluminum electrolytic single-ended capacitors are designed for high reliability and long life (up to 10,000 hours)
Tantalum Chip Capacitors
FEATURES EXPANDED VALUE RANGE & REDUCED CASE SIZES MOLDED CONSTRUCTION FOR HIGH SOLDERING HEAT RESISTANCE ELEVEN CASE SIZES (J, P, A2, A, B2, B, C2, C, V, D AND E) BOTH FLOW AND REFLOW SOLDERING APPLICABLE
YAGEO Corporation Date: 01/17/2007
YAGEO Corporation Date: 01/17/2007 Aluminum Electrolytic Capacitors File:2052 Engineering Bulletin for SK Type Page: 1/7 SK Type +85ºC Single-ended lead aluminum electrolytic capacitors for the rated voltage
4.0±0.5 (3.5) Top of spin. Standard terminal type does not require terminal trimming peocess.
Snap-in Type Series: HC Type: TS Features 30 % smaller than series TS-HB RoHS directive compliant Specifi cations Category Temp. Range 40 C to +105 C 25 C to +105 C Rated Range 10 V.DC to 100 V.DC 160
Standard and Low Profile Tantalum Microchip Capacitors. STANDARD CASE DIMENSIONS: millimeters (inches)
FEATURES The world s smallest surface mount tantalum capacitor CV range: 0.10-150μF / 2-25V 11 case sizes available, standard and low profile APPLICATIONS Hearing Aids, Non-life support medical, Long life
Film Capacitors. Metallized Polyester Film Capacitors (MKT-S) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT-S) Series/Type: B32537 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
Japan Malaysia China. Frequency(Hz) k 10k 100k 1.0 to φ10. ( 6.3mm dia) Vent P±0.5
Radial Lead Type Series: FC Type :A Features Endurance : 5 C 00 h to 5000 h Low impedance Japan Malaysia China Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance
Type 4CMC 85 ºC, High Cap, Plug-in, Radial Leaded Aluminum Rugged Value, High-Capacitance 85 C Board-Mount Type
Type 4CMC is the PC-mount version of the high-capacitance Type DCMC screw-terminal capacitor and has about 50% more capacitance per can size through 250 V. It s for bus fltering applications where more
STANDARD CASE DIMENSIONS: millimeters (inches) W 1 dimension applies to the termination width for A dimensional area only.
L W FEATURES Non-burn safe technology Reliability level: 0.5%/1000 hours at 85ºC 13 case sizes available, standard and low profile Environmentally friendly, RoHS Compliant CV range: 2.2-1000μF / 1.8-10V
Date:08/01/2001. Aluminum Electrolytic Capacitors Engineering Bulletin for SK Type Page: 1/7
YAGEO Corporation Date:08/01/2001 Aluminum Electrolytic Capacitors File:2052 Engineering Bulletin for SK Type Page: 1/7 SK Type +85ºC Single-ended lead aluminum electrolytic capacitors for the rated voltage
TMJ Tantalum SMD S1gma TM Series Capacitors
The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely
Aluminum Capacitors, Power High Ripple Current, Screw Terminals
Aluminum Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic capacitors,
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder
Features : Series Table. Electric Double Layer Capacitors
Features : Can be used as a rechargeable battery and ideal for backing up purpose. Capable of several hundreds of thousands of charge/discharge cycles; free from throwaway disposal. Does not contain toxic