Surface Mount Aluminum Electrolytic Capacitors
|
|
|
- Shavonne Harper
- 5 years ago
- Views:
Transcription
1 FETURES YLINRIL V-HIP ONSTRUTION FOR SURFE MOUNTING SUIT FOR HIGH TEMPERTURE REFLOW SOLERING (UP TO 260 ) 2,000 HOUR LO +85 ) ESIGNE FOR UTOMTI MOUNTING N REFLOW SOLERING HRTERISTIS Rated Voltage Rating Rated apacitance Range Operating Temp. Range apacitance Tolerance Max. Leakage urrent fter 2 20 Tan 120Hz/20 Low Temperature Stability Impedance 120Hz Load Life 85 ll ase Sizes = 2,000 hours STNR VLUES N SE SIZES (mm) ap. (µf) *See Part Number System for etails 6.3 ~ 50Vdc 1.0 ~ 1,000μF -40 ~ +85 ±20% (M) 0.01V or 3μ LOW ESR OMPONENT LIQUI ELETROLYTE For Performance ata see whichever is greater W.V. (Vdc) S.V. (Vdc) ~ 5mm diameter & 6.3x5.5mm x8mm & 8~10mm diameter W.V. (Vdc) Z-25 /Z Z-40 /Z apacitance hange Within ±25% of initial measured value Tan δ Less than ±200% of the specified maximum value Leakage urrent Less than the specified maximum value Working Voltage (Vdc) R x R x R x R x5.5 4x5.5 5x x5.5 4x5.5 5x x x5.5-5x x x x x x x8 8x x x x8 10x x x x x8 10x10.5 8x x8 8x10.5 8x10.5 8x x8 8x10.5 8x x10.5 8x10.5 8x x x PRT NUMER SYSTEM NSE 101 M 16V 6.3x5.5 N P F Series S lloy ompatible 230 ~ 260 RoHS ompliant includes all homogeneous materials PEK REFLOW TEMPERTURE OES Peak Reflow Temperature N 260 L 250 TERMINTION FINISH & PKGING OPTIONS OES L S LS RoHS ompliant Optional plastic reel (standard material is cardboard). See page 4 & 5 Termination/Packaging Reflow Temperature Size in mm Working Voltage Tolerance M=20% apacitance in µf, first 2 digits are significant Third digit is no. of zeros, R indicates decimal for values under 10µF Finish & Reel Size Sn-i Finish & 13" Reel Sn-i Finish & 15" Reel 100% Sn Finish & 13" Reel 100% Sn Finish & 15" Reel 1 SPEIFITIONS RE SUJET TO HNGE
2 STNR VLUES, SE SIZES N SPEIFITIONS NI Part Number ap. W.V. issipaton Factor Max. Ripple urrent (m) Load Life Hours (μf) (Vdc) (Tan δ) NSE220M6.3V4X5.5NF ,000 NSE470M6.3V5X5.5NF ,000 NSE101M6.3V6.3X5.5NF , NSE331M6.3V6.3X8NF ,000 NSE471M6.3V8X10.5LF ,000 NSE102M6.3V10X10.5LF ,000 NSE330M10V5X5.5NF ,000 NSE101M10V6.3X5.5NF ,000 NSE221M10V6.3X8NF ,000 NSE331M10V8X10.5LF ,000 NSE471M10V8X10.5LF ,000 NSE100M16V4X5.5NF ,000 NSE220M16V5X5.5NF ,000 NSE470M16V5X5.5NF ,000 NSE101M16V6.3X5.5NF , NSE221M16V8X10.5LF ,000 NSE331M16V8X10.5LF ,000 NSE471M16V8X10.5LF ,000 NSE471M16V10X10.5LF ,000 NSE4R7M25V4X5.5NF ,000 NSE100M25V4X5.5NF ,000 NSE330M25V6.3X5.5NF ,000 NSE101M25V6.3X8NF ,000 NSE221M25V8X10.5LF ,000 NSE4R7M35V4X5.5NF ,000 NSE100M35V5X5.5NF ,000 NSE220M35V6.3X5.5NF ,000 NSE330M35V6.3X5.5NF ,000 NSE470M35V6.3X8NF ,000 NSE101M35V10X10.5LF ,000 NSE221M35V8X10.5LF ,000 NSE1R0M50V4X5.5NF ,000 NSE2R2M50V4X5.5NF ,000 NSE3R3M50V4X5.5NF ,000 NSE4R7M50V5X5.5NF ,000 NSE100M50V6.3X5.5NF , NSE220M50V6.3X5.5NF ,000 NSE330M50V6.3X8NF ,000 NSE330M50V8X10.5LF ,000 NSE470M50V10X10.5LF ,000 NSE101M50V8X10.5LF ,000 PREUTIONS Please review the notes on correct use, safety and precautions found at If in doubt or uncertainty, please review your specific application - process details with NI s technical support personnel: tpmg@niccomp.com 2 SPEIFITIONS RE SUJET TO HNGE
3 IMENSIONS (mm) N REEL QUNTITIES ase Size φ±0.5 L max. ±0.2 ±0.2 I±0.3 W P±0.3 Qty/Reel 4x ~ ,500 5x ~ , x ~ , X ~ x ~ x ~ mm max. φ L W + - I I P RIPPLE URRENT FREQUENY ORRETION FTORS Frequency 50/60Hz 120Hz 500Hz 1KHz 10KHz 1μF ~4.7μF ~47μF ~1000μF PEK REFLOW TEMPERTURE N URTION iameter Time above Peak Temperature seconds 4 ~ 6.3mm φ 60 sec. max ~ 10mm φ 60 sec. max. 250 apacitors can withstand two times reflow at the above conditions. Second reflow shall be at least one hour after natural cool to room temperature. Temperature - eg Preheat seconds max. (150 ~ 180 ) Time bove 217 Peak Temperature Time (Seconds) REOMMENE LN PTTERN IMENSIONS (mm) ase Size a b c 4x x x3x x x x c b a Review & ompare Reflow Soldering Heat Limits V-chip SMT luminum Electrolytic apacitors 3 SPEIFITIONS RE SUJET TO HNGE
4 RRIER TPE ase Size ±0.5 ±0.2 ±0.3 ±0.1 P ±0.1 T ±0.2 4 x x x x X x TR13 330mm (13") ROR REEL TR15 380mm (15") ROR REEL (See page 6 for plastic reel dimensions) ase Size W ±1.0 Quantity Per Reel 13" Reel 15" Reel 4 x ,500 pcs 2,000 pcs 5 x ,000 pcs x ,000 pcs x pcs 900 pcs 8 X * 300 pcs 500 pcs 10 x * 400 pcs 500 pcs *W+3/-1 TPING SPEIFITIONS (mm) 1. oth Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets. 2. Leader tape: pproximately 20cm of cover tape at leader. 3. onnection: Maximum 3 connections (slices) per reel. RRIER φ+0.1/ ± Feeding T ROR REEL 3.0 ± ± ± Min. 330 or 380 mm 13 ±0.5 W 4 SPEIFITIONS RE SUJET TO HNGE
5 Optional V-hip 13" (330mm) Plastic Reels (TR13PF suffix) imensions (mm) ase Size Tape Width W1 W2 4x5.5, 5x ~ ~ x5.5, 6.3x ~ ~ x10.5, 10x ~ ~ 32.0 ase Size Tape Width E 4x5.5, 5x f330 ±2.0 f50~105 f13 f x5.5, 6.3x ±0.5 ±1.0 ±0.5 8x10.5, 10x W1 W2 olor lack or lue E Optional V-hip 15" (380mm) Plastic Reels (TR15PF suffix) imensions (mm) ase Size Tape Width W1 W2 4x5.5, 5x ~ ~ x5.5, 6.3x ~ ~ x10.5, 10x ~ ~ 32.0 ase Size Tape Width E 4x5.5, 5x f380 f13 f x5.5, 6.3x f80~105 ±2 ±0.5 ±1.0 ±0.5 8x10.5, 10x W1 W2 E olor lack or lue ase Size Quantity Per Reel 13" Reel 15" Reel 4 x 5.5 1,500 pcs 2,000 pcs 5 x 5.5 1,000 pcs x 5.5 1,000 pcs x pcs 900 pcs 8 X pcs 500 pcs 10 x pcs 500 pcs 5 SPEIFITIONS RE SUJET TO HNGE
Surface Mount Aluminum Electrolytic Capacitors
FETURES YLINRIL V-HIP ONSTRUTION LONG LIFE (7,000 ~ 10,000 HOURS) IE TEMPERTURE RNGE (-25 ~ +105 ) ESIGNE FOR REFLO SOLERING RoHS ompliant includes all homogeneous materials *See Part Number System for
Surface Mount Aluminum Electrolytic Capacitors
FETURES YLINDRIL V-HIP ONSTRUTION FOR SURFE MOUNTING REDUED SIZE VILLE WITH NTI-VIRTION TERMINTIONS (8 & 10mm DIMETER) SUIT FOR HIGH TEMPERTURE REFLOW SOLDERING (UP TO 260 ) 2,000 HOUR LOD LIFE @ +105
Surface Mount Aluminum Electrolytic Capacitors NACZF Series
FETURES YLINRIL LELESS TYPE FOR SURFE MOUNTING HIGH PITNE VLUES (UP TO 6800µF) LO IMPENE/HIGH RIPPLE URRENT T 100KHz 12.5mm x 17mm ~ 18mm x 22mm SE SIZES IE TERMINTION STYLE FOR HIGH VIRTION.PPLITIONS
Surface Mount Aluminum Electrolytic Capacitors
FEATURES YLINDRIAL V-HIP ONSTRUTION FOR SURFAE MOUNTING AVAILALE WITH ANTI-VIRATION WIDE TERMINATIONS VERY LOW IMPEDANE & HIGH RIPPLE URRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105 ) SUITALE
Surface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Surface Mount Aluminum Electrolytic Capacitors
CYLINDRICL VCHIP CONSTRUCTION FOR SURFCE MOUNTING VERY LOW IMPEDNCE WIDE TEMPERTURE RNGE (55 +5 O C) REDUCED SIZE DESIGNED FOR UTOMTIC MOUNTING ND REFLOW SOLDERING MEETS THE REQUIREMENTS OF ECQ200* *Contact
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
NPI Power Inductors. NPI W Series
FETURES HIGH URRENT, SMLL SIZE (UP TO 8.6 MPS) SURFE MOUNTLE ONSTRUTION HIGH INUTNE (UP TO 1000µH) TPE N REELE FOR UTOMTI INSERTION FOR USE IN / ONVERTERS HRTERISTIS ase Size NPI16W NPI31W NPI34W NPI52W
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800μF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Technical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF
www.niccomp.com/pcn Technical Support: tpmg@niccomp.com October 28 th 2016 SUB: EOL End of Life Notification Products impacted by this notice: NPC Series SMT Solid Polymer Aluminum Electrolytic Capacitors
High Power Thin Film Chip Resistors
FETURES IMPROVE POWER RTING (HIGHER THN NTR SERIES) PRECISE TOLERNCE N TEMPERTURE COEFFICIENT EI STNR CSE SIZES (0603 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLERLE (Pb FREE TERMINTION
Large Can Aluminum Electrolytic Capacitors
FEATURES LONG LIFE AT +105 C (2,000 ~ 3,000 HOURS) HIGH RIPPLE CURRENT HIGH VOLTAGE (UP TO 500VDC) SUITABLE FOR SWITCHING POWER SUPPLIES SPECIFICATIONS *See System for Details Operating Temperature Range
Miniature Aluminum Electrolytic Ca pac i tors
ULTRA LOW IMPEDANCE, RADIAL LEADS, POLARIZED, ALUMINUM ELEC TRO LYT IC FEATURES VERY LOW IMPEDANCE LONG LIFE AT 105 C (1000 ~ 5000 hrs.) HIGH STABILITY AT LOW TEMPERATURE IDEALLY FOR SWITCHING POWER SUPPLIES
Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A
Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:
PRCP POLYMER RESETTABLE CIRCUIT PROTECTORS FEATURES APPLICATIONS PART NUMBER DESIGNATION P R C P - M S M F / 2 4 X - 2 E- 9 9.
FETURES PPLITIONS PRT NUMER ESIGNTION P R P - M S M F 0 7 5 / 4 X - E- 9 9 Product name Product number Hold current (I hold) Higher voltage option lankstandard 66 volt rated volt rated 4040 volt rated
Tantalum Chip Capacitors
FEATURES EXPANDED VALUE RANGE & REDUCED CASE SIZES MOLDED CONSTRUCTION FOR HIGH SOLDERING HEAT RESISTANCE ELEVEN CASE SIZES (J, P, A2, A, B2, B, C2, C, V, D AND E) BOTH FLOW AND REFLOW SOLDERING APPLICABLE
Multilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
PRCP POLYMER RESETTABLE CIRCUIT PROTECTORS FEATURES APPLICATIONS PART NUMBER DESIGNATION P R C P - M S M F / 2 4 X - 2 E- 9 9.
FETURES PPLITIONS PRT NUMER ESIGNTION P R P - M S M F 0 7 5 / 4 X - E- 9 9 Product name Product number Hold current (I hold) Higher voltage option lankstandard 6 6 volt rated 4 4 volt rated0 0 volt rated
tan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0
Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant
CB Series Tantalum Capacitors
Series Features: Lead-Free. Specially designed of general purpose. Highly reliable resin dipped type. xcellent frequency and temperature characteristics. Non-flammable epoxy resin. Specifications: Item
Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type
Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long
Multilayer Ceramic Chip Capacitors
RoHS Compliant FEATURES Includes all homogeneous materials STANDARD EIA 0805 & 1206 PACKAGING *See Part Number System for Details EACH COMPONENT CONTAINS 4 ISOLATED CERAMIC CAPACITORS AVAILABLE IN A WIDE
GENERAL DESCRIPTION. AVX Capacitor Array - W2A41A***K S21 Magnitude Frequency (GHz)
apacitor rray apacitor rray (I) NFIS OF USING IOR RRYS V capacitor arrays offer designers the opportunity to lower placement costs, increase assembly line output through lower component count per board
-40 to C 6.3 to 50 V.DC 22 to 6800 µ F ±20 % (120Hz/+20 C) I < 0.01 CV (µa) after 2 minutes application of rated working voltage at +20 C
Radial Type Series: FM Type :A n Features Low impedance(40 to 70% less than FC Series) Endurance : 2000 to 7000 hours at +105 C Country of Origin Japan Malaysia China n s Category temp. range Rated W.V.
Contents CORNELL DUBILIER
Contents Products Listed by Type Designation........................................................ Chip and SMT Selector Guide................................................................... 1.001
16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:
T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working
HIGH VOLTAGE THICK FILM CHIP FIXED RESISTOR
HIGH VOLTGE THIK FILM HIP FIXED RESISTOR 3000V Max Operating voltage 3000V Stable electrical capability, high reliability Superior mechanical and frequency characteristics ROHS ompliant with RoHS directive
For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k
T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal
Molded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
*See Part Number System for Details SPECIFICATIONS. Case Dimensions Type Case Size P 2 NFCC04
FETURES RECTNGULR PCKGE ITH METL STRIP FUSE ELEMENT EI SIZES 42, 63, 85 ND 126 CURRENT RTINGS FROM.2 ~ 5. MPS SFETY STNDRD PPROVL (UL and c-ul File Number E32168) Pb-FREE COMPTILE ITH FLO ND REFLO SOLDERING
FEATURES. SMD Style. Reflow soldering. Lead (Pb)-free APPLICATIONS. U R (V) x 5.8
ECV Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors SMD Style Miniature dimension Pb-free Available RoHS* COMPLIANT Extended temperature range: 105 C QUICK REFERENCE DATA DESCRIPTION
Low ESR and High Frequency Radial Electrolytic Capacitor. TZE Series. Features. Applications. Dimensions (in mm)
Low ESR and High Frequency Radial Electrolytic Capacitor Low ESR and High Frequency Radial Electrolytic Capacitor Features Radial leads, cylindrical aluminum case Low impedance and high frequency High
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
Summary of Specifications
Series Snap Mount Large High CV High Ripple RoHS Compliant 85 C Maximum Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life
Type AFK, -55 C to 105 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 C
hip and SMT apacitors Type AFK, -55 to 05 SMT Aluminum Electrolytic apacitors - Lowest E.S.R., 05 Lowest ESR and Long Life for Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature:
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice. 1. Features Ultra Low & high ripple
Wirewound Resistors, Industrial Power, Tubular, Ribwound (RB), Fixed (RBEF, RBSF)
REF, RSF Wirewound Resistors, Industrial Power, Tubular, Ribwound (R), Fixed (REF, RSF) FETURES High temperature silicone or vitreous enamel coatings Excellent for pulsing applications ll welded construction
Summary of Specifications
Large an Screw erminals Longer Life U36 Grade High Ripple 350 to 500VD Ratings RoHS ompliant 85 Maximum emperature he series is a longer life version of the industry standard U36D specifically designed
Wirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Edgewound Tubular
Wirewound Resistors, Industrial Power, Vitreous oated, djustable Edgewound Tubular STNR ELETRIL SPEIFITIONS GLOL HISTORIL POWER RTING P 25 W FETURES High temperature vitreous coating omplete welded construction
KMG Series. Miniature General Purpose Solvent Proof 105 C Maximum Temperature
Miniature General Purpose Solvent Proof 5 C Temperature The series capacitors are designed for general purpose use with an operating temperature range for most of these capacitors from 55 C to 5 C. The
Polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
SWITCH-MODE CERAMIC CAPACITORS
Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR 1 Application Guidelines 1. Polarity CSCAP is solid aluminum electrolytic capacitors with positive and negative electrodes. Do not reverse the polarity when
LPH Large Capacitance Aluminum Electrolytic Capacitors
Series LPH 105 C, Miniaturized, High-Reliability, High-Ripple Capacitors ULTRAMINI, HIGH RELIABLILITY TYPE Smaller-sized and higher-ripple than L3J. Guaranteed for 2000 hours at 105 C. Outline Drawing
SMM SERIES Engineering Bulletin Mar 07
Series SERIES Snap Mount Downsize High Long Life RoHS Compliant 85 C Maximum Temperature The series is a high voltage, long life snap-in capacitor series that offers downsized versions of the SMH series.
General Purpose Ceramic Capacitors (C Series)
Features: RoHS Compliant and Halogen Free Capacitance range: 0.1pF to 220uF range: 4V to 100V Terminations: 100% matte Tin (Sn), Palladium (Pd-Ag), Gold (Au) and Lead (Pb) Very low ESR in X7R/X5R (
Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
FILTER D-SUB. connectors
FILTER -SUB connectors table of contents MIL-TL-24308...3 Layouts...3 -Subminiature onnectors...4 How to order...5 MIL-TL-83513...6 onnectors and Layouts...7 How to order...8 OMBO -SUB MINITURE... 9 High
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-19100328 4/14/06 Added recommended PCB layout and plots. 6/2/06 Added Tape and Reel
Metal Oxide Varistor:TVM-B Series
Features 1. RoHS compliant 2. High surge suppress capability 3. EIA size 0402 ~ 2220 4. Operating voltage: 5.5 ~ 85 Vdc 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer ceramic construction
CGA Series Automotive Grade Capacitors
CGA Series Automotive Grade Capacitors Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before
PTS645 Series 6 mm Tact Switches
PTS5 Series mm Tact Switches Features/enefits Compact size x mm Variety of actuator lengths Choice of actuation force RoHS compliant and compatible Typical Applications Consumer products Instrumentation
Summary of Specifications
Miniature General Purpose Solvent Proof Large and Small 85 C Temperature Actual Size The series capacitors are a miniaturized version of the SME series. These capacitors are designed for a load life of,000
LANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
Automotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
CHIP FUSE; RECTANGULAR TYPE. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: HFC K HTS 0001 /3 Date: 2017. 1. 10 Specification Title: Style: CHIP FUSE; RECTANGULAR TYPE HFC32[Optional code:ag] RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification contained
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder
Snap-in Type Aluminium Electrolytic Capacitors
Endurance: 85 2000hours Recommended Applications : Applying to switching power supply and other industry/ commercial field Corresponding product to RoHS SPECIFICATIONS Item Category Temperature Range -40~+85
Design number. RC filtering circuit for USB interface
hip R Networks hip R Networks Type: EZDLU n Features. Smallest SMD R/ filter for USB interface l Including 2 circuits of p type R/ filter in a chip (hip size:3.2 mm.6 mm ) l Space saving and low placing
CHIP FUSE; RECTANGULAR TYPE. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: SBF K HTS 0001 /4 Date: 2017. 1. 10 Specification Style: CHIP FUSE; RECTANGULAR TYPE SBF32[Optional code:as] RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification contained in
Reliability testing of solid and liquid type aluminum electrolytic capacitor after long storage
February 4, 2009 SUB: Component testing after Long Period on Shelf Reliability testing of solid and liquid type aluminum electrolytic capacitor after long storage The following pages show the reliability
Reference Only. *B: Bulk packing also available. Inductance. Tolerance M:±20% N:±30% 0.150±25% 1.0 * * N:±30% 0.23±25% 0.8 *2 0.
CHIP COIL (CHIP INDUCTORS) LQM21PN GRD REFERENCE SPECIFICATION P.1/9 1. Scope This reference specification applies to LQM21PN_GR series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 21 P N 1R
POLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
After 5 seconds at +260 C (with pre-conditioning) (±20% for 0402 & 0603 case sizes) After 500 hours at 60 C and 90 ~ 95% RH Humidity
FEATURES SIZES K(0402), J (0603), D (0805) AND C (1008) HIGH Q, HIGH CURRENT AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE* HIGH AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC TAPE PACKAGE
W2A (0508) Capacitor Arrays. 4 pcs 0402 Capacitors = 1 pc 0508 Array. 2.1 (0.083) AREA = 3.95mm2 (0.156 in2)
apacitor rray apacitor rray (I) NFI OF UING IOR RRY V capacitor arrays offer designers the opportunity to lower placement costs, increase assembly line output through lower component count per board and
MVR G. Size: Unit:mm. Type Length(L) Width(W) High(H) Termination(L1) ± ± (max) 0.40±
1 Electrical Characteristics 1.1 Technical Data Symbol Value Unit Maximum allowable continuous AC voltage*1 V RMS 50.0 V Maximum allowable continuous DC voltage V DC 65.0 V Varistor voltage Measured*2
ORDER INFORMATION L-KLS6-MVR G
istors Varistor s L-KLS6-MVR3220-431G 3220 Varistor s,430v,39pf 1 Electrical Characteristics 1.1 Technical Data Symbol Value Unit Maximum allowable continuous AC voltage*1 V RMS 275.0 V Maximum allowable
POLY-FUSE Resettable PTCs Surface Mount > 1206L Series
Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
ALUMINUM ORGANIC CAPACITORS
ALUMINUM ORGANIC CAPACITORS A700 Series APPLICATIONS Input/Output Filters for voltage regulators, converters, and SMPS Battery Decoupling (portable, handheld electronics) Power Decoupling (Procesor, Transmitter
2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
Reference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *
P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N
SPECIFICATION FOR APPROVAL
SPEIFITION FOR PPROVL Ⅰ. onfiguration and dimensions: 'S W NO. S0704 F - REV. 20130727- PE 1 1R0 E F (P Pattern) Unit:m/m 7.30 ±0.2 7.30 ±0.2 4. ±0.2 2.00 typ. E 4.60 typ. F 4.80 ref. 2.40 ref. 1. ref.
POLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
1.0" Min. L.S..762/.030. Styles SR15, SR20, SR30, SR40, SR50
Radial Leads/SkyCap GENERAL INFORMATION AVX SR Series Conformally Coated Radial Leaded MLC Temperature Coefficients: C0G (NP0), X7R, Z5U 200, 100, 50 Volts (300V, 400V & 500V also available) Case Material:
Size code Rated W.V. Cap. change. 4 W.V to 50 W.V. 6.3 W.V > 10 W.V 1000 hours ±20 % < 200 % initial specifi ed value
Surface Mount Type Series: S Type: V Features Endurance: 85 C 2000 h Vibration-proof product is available upon request. (φ8 mm and larger) RoHS directive compliant s Category Temp. Range 40 C to +85 C
U37L SERIES Engineering Bulletin Mar 2013
EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 10,000 Hours Lifetime at 85 Up to 175,000 Hours Useful Life he series is a longer life version of the U37
ALUMINUM ORGANIC CAPACITORS
ALUMINUM ORGANIC CAPACITORS A700 Series APPLICATIONS Input/Output Filters for voltage regulators, converters, and SMPS Battery Decoupling (portable, handheld electronics) Power Decoupling (Procesor, Transmitter
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification October 27, 16 V.15 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free
WLFI1608 Ferrite Chip Inductors
WLFI1608 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI1608 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
Aluminum Electrolytic Capacitors: SMD
Aluminum Electrolytic Capacitors: SMD Series/Type: The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 31, 2016 V.14 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
WIMA MP 3-Y2. Metallized Paper (MP) RFI-Capacitors Class Y2 PCM 10 mm and 15 mm. Typical Applications. Construction. Packing.
WIMA MP 3-Y2 Metallized Paper (MP) RFI-Capacitors Class Y2 PCM 10 mm and 15 mm Special Features Particularly high reliability against active and passive flammability Excellent self-healing as well as high
U37F SERIES Engineering Bulletin Mar 2013
EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 5,000 Hours Lifetime at 85 Up to 150,000 Hours Useful Life he series is a general purpose, screw mount U37
C Series Mid Voltage Application
C Series Mid Application Type: C1005 [EIA CC0402] C1608 [EIA CC0603] C2012 [EIA CC0805] C3216 [EIA CC1206] C3225 [EIA CC1210] C4532 [EIA CC1812] C5750 [EIA CC2220] Issue date: April 2011 TDK MLCC US Catalog
Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550
Standard capacitors Applications Frequency converters Uninterruptible power supplies All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Specifications
Application Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder
Switch EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS 3PST EDG/EDS 4PST EDG/EDS DPDT
EDG/EDS SERIES SLIDE TYPE EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS PST EDG/EDS 4PST EDG/EDS DPDT FETURES Tactile response is performed directly by larger contact pressure to ensure very stable contact.
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
Overview The KEMET Aluminum Organic Capacitor (AO-CAP) is a solid state aluminum capacitor. The cathode is a conductive organic polymer which results in very low ESR and improved capacitance retention
Reference Only. 1. Scope This reference specification applies to LQM2MPN_G0L series, Chip Coil (Chip Inductors).
Spec No. JELF243B-22L-1 P1/9 CHIP COIL (CHIP INDUCTORS) LQM2MPN GL REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2MPN_GL series, Chip Coil (Chip Inductors). 2. Part Numbering
U37X SERIES Engineering Bulletin Mar 2013
EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 15,000 Hours Lifetime at 85 Up to 175,000 Hours Useful Life he series is the longest life version of the
WLFI2012 Ferrite Chip Inductors
WLFI2012 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI2012 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
MF-R Series - PTC Resettable Fuses
R010 Features Radial Leaded evices ured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements ulk packaging, tape and reel and mmo- Pak available on most models gency recognition:
SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low ESR
SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low Ultra Low < 30 mω New E/7260 Case with < 18 mω Up to 5 Amps ripple current RoHS Compliant & Leadfree Termination (see www. kemet.com for