Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550

Transcription

1 Standard capacitors Applications Frequency converters Uninterruptible power supplies All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Specifications Operating Temperature Range Rated voltage V R Item Construction Charge-discharge proof, polar Aluminum case with insulating sleeve Poles with screw terminal connections Mounting with ring clips, clamps Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Updated Series Preliminary Data Sheet RG series Surge voltage V S Rated capacitance C R Capacitance tolerance Leakage Current (+20.max.) Dissipation Factor (tanδ,at 20,120Hz) 0.85 = (C V) 4 Less than the value under table(%) V R <=315V 1.15 V R 390 to μf ±20%(120Hz,+20 ) or 5mA, whichever is smaller (after 5 minutes) Where, : Max. leakage current (μa), C : Nominal capacitance (μf), V : Rated voltage (V) D.F. (%)max VR > 315V 1.10 V R Working Voltage(VDC) 160~ ~550 d = 51 mm: approx. 17 nh Self-inductance ESL Useful life d 63.5 mm: approx. 20 nh Capacitors with low-inductance design: d 63.5 mm: approx. 15 nh Requirements: 85 C; V R, I AC,R C/C 15% of initial value >6000 h ESR 1.75 times initial specified limit Failure rate : 1%/1000 hour Voltage Endurance test Post test requirements: 85 C; V R DC/C 10% of initial value 2000 h ESR 1.3 times initial specified limit Vibration Resistance test To IEC , test Fc: Displacement amplitude 0.75 mm, frequency range Hz, acceleration max. 10 g, duration 3 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Characteristics at low temperature Max. impedance ratio at 120 Hz V R (V) 160~ Z -25 / Z Z -40 / Z Sectional specification IEC and JIS-C-5101 Multiplier for Ripple Current vs. Frequency Frequency(Hz) K 3K Multiplier

2 Dimensional drawings Ring clip/clamp mounting: M5:Min.reach of screw = 8mm M6:Min.reach of screw = 12mm Dimensions Terminal Dimensions(mm) with insulating sleeve d±2 L±3 L 1 ±3 d 2 max. a±0.5 M ~ ~ M ~ ~ M ~ ~ M5 76.2/89 100~ ~ M6 76.2/89 100~ ~ M ~ ~ Packing Packing of screw Capacitor diameter d(mm) length l(mm) 70mm >70mm 70mm >70mm 70mm >70mm Packing units (pcs.) all all all all 6 Accessories The following items are included in the delivery package, but are not fastened to the capacitors. Thread Maximum torque For terminals M5 2 Nm M6 2.5 Nm For mounting M12 10 Nm 351

3 Case Size WV (Vdc) Cap (uf) Size mm Rated Ripple current (Arms/85 /120Hz) Typ. ESR MAX ESR WV (Vdc) Cap (uf) Size mm Rated Ripple current (Arms/85 /120Hz) Typ. ESR MAX ESR

4 Case Size WV (Vdc) Cap (uf) Size mm Rated Ripple current (Arms/85 /120Hz) Typ. ESR MAX ESR

5 Useful life depending on ambient temperature T a versus under ripple current operating conditions I I a R H 75000H 50000H 25000H 10000H 6000H Ta 354

6 Extremely Long useful life Applications Professional power supplies Construction Charge-discharge proof, polar Frequency converters Aluminum case with insulating sleeve Uninterruptible power supplies Poles with screw terminal connections Mounting with ring clips, clamps or threaded stud Long useful life High reliability Version with low-inductance design available All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Specifications Updated Series Preliminary Data Sheet RP series Operating Temperature Range Rated voltage V R Surge voltage V S Item Rated capacitance C R Capacitance tolerance Leakage Current (+20.max.) Dissipation Factor (tanδ,at 20,120Hz) Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC V R <=315V 1.15 V R V R > 315V 1.10 V R 0.85 = (C V) to μf ±20%(120Hz,+20 ) or 5mA, whichever is smaller (after 5 minutes) Where, : Max. leakage current (μa), C : Nominal capacitance (μf), V : Rated voltage (V) Less than the value under table(%) Working Voltage(VDC) 160~ ~550 D.F. (%)max Self-inductance ESL Useful life d = 51 mm: approx. 17 nh d 63.5 mm: approx. 20 nh Capacitors with low-inductance design: d 63.5 mm: approx. 15 nh Requirements: 85 C; V R, I AC,R C/C 15% of initial value Voltage Endurance test >10000 h ESR 1.75 times initial specified limit Failure rate : 1%/1000 hour Post test requirements: 85 C; V R DC/C 10% of initial value Vibration Resistance test 2000 h ESR 1.3 times initial specified limit To IEC , test Fc: Characteristics at low temperature Max. impedance ratio at 120 Hz Sectional specification IEC and JIS-C-5101 Multiplier for Ripple Current vs. Frequency Frequency(Hz) 50 Displacement amplitude 0.75 mm, frequency range Hz, acceleration max. 10 g, duration 3 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. V R (V) 160~ Z -25 / Z Z -40 / Z K 3K Multiplier