SIG Snap-in, 125 C 65 GSH GSG LFH. MDK Motor start 105. MEK Motor start 107. E-Type Flash capacitors 109

Transcription

1 Series Design Application Page Series Design Application Page A Axial leaded, 85 C 9 SIG Snap-in, 125 C 65 AH Axial leaded, 105 C 13 GS DIN terminals, 85 C 69 AG Axial leaded, 125 C 17 GSH DIN terminals, 105 C 75 ATBI/ ATBIG Axial leaded, bipolar,hifi 19 GSG DIN terminals, 125 C 81 GM High s / small dimensions, 85 C 23 LF High s with solder lugs, 85 C 85 GMX High s long - life type, 85 C 29 LFH High s with solder lugs, 105 C 91 G High s, 105 C 35 S Central mounting, 85 C 97 GG High s, 125 C 41 SZ Central mounting double capacitance, 85 C 97 GF Self extinguishing electrolyte, 85 C 43 SH Central mounting, 105 C 101 GW Highest s, 105 C 47 MDK Motor start 105 SI Snap-in, 85 C 51 MEK Motor start 107 SIH Snap-in, 105 C 59 E-Type Flash capacitors 109 On the following pages you can find a detailed index. 1

2 GENERAL INFORMATION Construction of Aluminium Electrolytic Capacitors Different types of foil Parameter Voltage Surge Voltage Voltage Maximum Reverse Voltage Capacitance DC and AC Capacitance Capacitance vs Temperature and Frequency ESL Dissipation factor tan δ (DF) Impedance Z Mounting Thermal Model Quality Certification Safety Precausions-Envirnonmental aspects Charged Capacitors Misapplication Operating Electrolytes RoHS Disposal...8 Axial Capacitors...9 Type A 9 Type AH...13 Type AG...17 Type ATBI / ATBIG...19 Screw Terminal Capacitors...23 Type GMA / GMB...23 Type GMXA / GMXB...29 Type GA / GB...35 Type GGA / GGB...41 Type GFA / GFB...43 Type GW...47 Snap-in Capacitors...51 Type SI / SI4P...51 Type SIH / SI4PH...59 Type SIG / SI4PG...65 Capacitors for PCB mounted (DIN-Type)...69 Type GS...69 Type GSH...75 Type GSG...81 Solder Lug Capacitors...85 Type LF...85 Type LFH...91 Central mounted Capacitors...97 Type S...97 Type SH Type SZ Motor - Start Capacitors Type MDK Type MEK Photoflash Capacitors Accessory equipment Insulating disks and nuts Discharge / Balancing Resistor Nylon Clamps

3 GENERAL INFORMATION has been a manufacturer of capacitors since Many years of experience, continuous research & development and the latest state of the art production machinery guarantees products of the highest quality. ALUMINIUM ELECTROLYTIC CAPACITORS -polarized capacitors general industrial inverter telecommunications switch mode power supplies photovoltaic wind power plants medical smoothing and filtering welding and photo flash applications -non polarized capacitors audio - video applications charging capacitors for photo flash capacitor banks single phase motor starting 1. Construction of Aluminium Electrolytic Capacitors High gain etched anode foil with the thick oxide layer, which is produced by the forming-process, is shown at the top of figure 2. The cathode foil with a much thinner oxide layer is arranged at the bottom. Layers of papers are seperating both foils. The electrolyte fills up the pores of the aluminium foils and thus builds either the one electrode of the anode or cathode capacitance. The dielectric consists of the oxide layers of the anode foil respectively the cathode foil. This construction builds two capacitances: the anode and the cathode capacitances. Because of the thicker oxide layer the anode capacitance is normally much smaller than the cathode capacitance. Fig. 1 shows the construction of a typical electrolytic capacitor 1 terminal 2 aluminium can 3 insulation 4 bottom insulation 5 deck 6 sealing 7 safety vent 8 tab foil 9 winding 3

4 Fig.2 shows a cross section of the winding. If two capacitors are connected in series, the total capacitance results from the relationship C G =C A *C K /(C A +C K ). If C A << C K it follows C G C A. ( aspired normal case) This means the anode capacitance determines the capacitance of the whole capacitor ( the cathode foil decreases the capacitance only somewhat). To accomplish that, highly etched cathode foils are necessary. Nonpolarized electrolytic capacitors use the same foil for anode and cathode ( C A = C K ) Therefore the capacitance of these capacitors are given by C G = 0,5 * C A. It is obvious that a nonpolarized electrolytic capacitor needs two times the space of a polarized capacitor. 2. Different types of foil etched and formed surface solid aluminium core high- anode foil etched and formed surface solid aluminium core low- anode foil etched surface solid aluminium core cathode foil 4

5 3. Parameter 3.1. The rated ( ) is the the capacitor is designed for. This may be applied continously to the capacitor over the full temperature range Surge The Surge may be applied to the capacitors only for a short time. 315 V : U S =1,15 * ( 5 times 1 min per hour) > 315 V : U S =1,1 * ( 5 times 1 min per hour) 3.3. In many applications the applied to capacitors is a combination of direct and alternating. Pay attention to the following points: The superposition of AC and DC must not exceed the rated. Reverse is not allowed. The applied ripple must not exceed the rated ripple Maximum reverse The Aluminium Electrolytic Capacitor is a polar component. Diodes with a max. conducting state of 0.8 V could be used to prevent reverse polarity. Single shorttime reverse polarity of V < 1.5 V for t < 1 s is tolerated capacitance The rated capacitance is usually determined at Hz and 20 C. In general the rated capacitance is marked on the capacitor in µf DC and AC capacitance The capacitance determined by AC measurements is smaller than the capacitance determined by charge / discharge measurements. In most applications the capacitor is applied to an alternating so in general the capacitance is measured with the AC method Capacitance vs temperature and frequency The capacitance varies with temperature and frequency The capacitance increase with increasing temperature The capacitance decrease with increasing frequency The following diagrams exhibit typical courses of these dependences 5

6 3.8. The equivalent series resistance represents the losses of a capacitor (the resistance of the foil, electrolyte, terminals). The depends on frequency and temperature ESL The equivalent series inductance represents the inductive part of the capacitor (leads, foil). The ESL depends mainly on the frequency Dissipation factor tan δ (DF) The dissipation factor is defi ned as the power loss of the capacitor divided by the reactive power of the capacitor. tan δ = *ω*c S In general the DF is measured at Hz and 20 C Impedance Z The impedance of the capacitor is given by the, ESL and the capacitance. The impedance depends on the temperature and the frequency. The Impedance is normally measured at 10 khz. 4. Mounting Position for screw terminal capacitors Upright position is recommended to prevent electrolyte leakage in case of vent opening. Horizontal mounting is also possible but the vent must faces upwards. Terminals / Mounting stud These maximum torque values should not be exceed: Screw thread Maximum torque in Nm M4 2,0 M5 2,0 M6 2,5 M8 4,0 M12 10,0 6

7 5. Thermal Model 7

8 6. Quality 6.1. Certification Quality is the main reason of our success. Without ignoring the importance of price of course, customers choose and remain with to satisfy their needs for top quality capacitors. It is therefore our pledge to continue producing and delivering top quality capacitors as efficiently as possible. In addition to our commitment to quality, we are also committed to a healthy environment. That is why each and every one of our employees, from top management down to the workshop, accepts his or her environmental responsibilities and strives to work as effectively and efficiently as possible. Intermediate testing is carried out through the entire production process in addition to the % final testing of each capacitor before shipment. All of our employees know that quality is the top priority for our customers. Workers participate in the process of continued improvement, quite often by anticipating. The result is uninterrupted flow production. are certified 9001:2008. The company certificate is available on the website. 7. Safety Precautions 7.1. Charged Capacitors Electrolytic capacitors may store high amounts of energy (especially photo flash and high capacitors). To avoid electrical shocks and sparks always discharge electrolytic capacitors before handling. For higher it is recommended to shorten the terminals during handling Danger of use and abuse Explosions of electrolytic capacitors may occur if the capacitor is exposed to reverse above specified limit above specified limit ripple s above specified limit ambient temperatures above specified limit high mechanical impact 7.3. Operating electrolytes Principally operating electrolytes used in products doesn t contain dangerous substances. However, in rare exceptional cases it is necessary to use certain substances to achieve certain physical chemical or electrical properties. In these cases the concentration is reduced to an absolute minimum. Generally the following safety hints should be respected using operating electrolytes: Avoid skin and eye contact. With electrolyte moistened skin parts are to be cleaned immediately with sufficient flowing water. Eyes must be rinsed at least 15 min under flowing cold water. Visit physician immediately with complaints. Inhale from electrolyte steam or nebulas has to be avoided. Work area must be well ventilated. Cloths witch came into contact with electrolyte should be washed or cleaned ROHS All products are full compliant with the RoHS Directive 2005/618/EC. Our products are declared as,,rohs compliant and on the packaging label as According to RoHS 7.5. Disposal Aluminium Electrolytic Capacitors can be disposed or recycled. The disposal rules are governed by the national and local authorities and and have to be taken into consideration. The European Waste Code No. is

9 85 C A 8. Ser Axial terminals Low mounting height High CV product Long life C Features All contacts welded High CV product Welded axial leads High reliability Applications HiFi Industrial Tube amplifier RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range 4, µf Capacitance tolerance ± 20% range Surge U S Max. reverse V 315 V: U S = 1,15 > 315 V: U S = 1,10 Category temperature range - 40 C C Leakage I L after 5 Useful life C ; ; I R~ 2 V 0,008 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specified limit I L specified limit Endurance test C, Δ C/C 20 % of initial value 130 % of specified limit Requirements I L specified limit Climatic category IEC /085/56 Voltage proof of the external insulation D 25 mm: 0 V AC D > 25 mm: 2500 V AC Sectional specification IEC Ø leads Up to 25 mm Ø : 0,8 mm ; more than 25 mm Ø : 1,0 mm 9

10 85 C A Electrical data and ordering code for series A cap. Case size D x L [mm] 85 C [A] A x , x , x , x , x , x , x , x , x , x , x , x50 9 6, x50 8 7, x66 6 9, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , cap. Case size D x L [mm] 85 C [A] A x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x ,

11 85 C A cap. Case size D x L [mm] 85 C [A] A... cap. Case size D x L [mm] 85 C [A] A x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , ,7 10x ,1 4, ,8 10x ,1 6, x , x , x , x , x , x , x , x , x , x , x , x , x ,

12 85 C A 12

13 105 C AH Axial terminals Low mounting height High CV product Long life C Features All contacts welded High ripple Welded axial leads High reliability Applications HiFi Industrial Telecommunications RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance ± 20% range V Surge U S Max. reverse 315 V: U S = 1,15 > 315 V: U S = 1,10 Category temperature range - 40 C C Leakage I L after 5 Useful life C ; ; I R~ 2 V 0,008 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specified limit I L specified limit Endurance test C, Δ C/C 20 % of initial value 130 % of specified limit Requirements I L specified limit Climatic category IEC /105/56 Voltage proof of the external insulation D 25 mm: 0 V AC D > 25 mm: 2500 V AC Sectional specification IEC Ø leads Up to 25 mm Ø : 0,8 mm ; more than 25 mm Ø : 1,0 mm 13

14 105 C AH Electrical data and ordering code for series AH cap. cap D x L [mm] 105 C [A] AH x , x , x , x , x , x , x , x , x , x , x , x50 9 6, x50 8 7, x66 6 9, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , D x L [mm] 105 C [A] AH x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x ,

15 105 C AH cap. cap. D x L [mm] 105 C [A] AH... D x L [mm] 105 C [A] AH x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x ,

16 105 C AH 16

17 125 C AG Axial terminals Low mounting height High CV product Long life C 1. Low temperature 55 C Features All contacts welded High temp 125 C Long useful life Applications Automotive Inverter/drives Laser Industrial RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance ± 20% range Surge U S Max. reverse V U S = 1,15 2 V Category temperature range - 55 C C Leakage I L after 5 Useful life Endurance test C ; ; I R~ C, 0,004 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specified limit I L specified limit Requirements Δ C/C 20 % of initial value 130 % of specified limit I L specified limit Climatic category IEC /125/56 Voltage proof of the external insulation D 25 mm: 0 V AC D > 25 mm: 2500 V AC Sectional specification IEC Ø leads Up to 25 mm Ø : 0,8 mm ; more than 25 mm Ø : 1,0 mm 17

18 125 C AG Electrical data and ordering code for series AG cap. Case size D x L [mm] 125 C [A] AG x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , cap. Case size D x L [mm] 125 C [A] AG x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x ,

19 85 C ATBI Axial terminals Bipolar construction For crossover networks Features All contacts welded Bipolar Applications HiFi Consumer RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items capacitance range Capacitance tolerance bipolar (rated DC) Max. peak (AC) Characteristics 1 1 khz ± 20%; ± 10% on request 63 V 23 V ac V 35 V ac May not exceed rated (DC) Category temperature range - 40 C C Useful life > C > 0 C Endurance test 000 C Requirements Δ C/C 30 % of initial value 300 % of specified limit I L specified limit Requirements Δ C/C 20 % of initial value 130 % of specified limit I L specified limit Climatic category IEC /085/56 Voltage proof of the external insulation D 25 mm: 0 V AC D > 25 mm: 2500 V AC Ø leads Up to 25 mm Ø : 0,8 mm ; more than 25 mm Ø : 1,0 mm 19

20 85 C ATBI Electrical data and ordering code for series ATBI Hz Hz capacitance (other values available on request) D x L [mm] ATBI... 1,0 10x20 1, ,2 10x20 2, ,3 10x20 3, ,7 10x20 4, ,8 10x20 6, x x x x x x x x x x x x x x ,0 10x20 1, ,2 10x30 2, ,3 10x30 3, ,7 10x30 4, ,8 10x30 6, x x x x x x x x

21 85 C ATBIG Axial terminals Bipolar construction Plain foil For crossover networks Features All contacts welded Bipolar Applications HiFi Consumer RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items capacitance range Capacitance tolerance Characteristics khz ± 10%; ± 5% on request 35 V 23 V ac bipolar (rated DC) 50 V 35 V ac 70V 50 V ac Max. peak (AC) May not exceed rated (DC) Category temperature range - 40 C C Useful life > C > 0 C Endurance test 000 C Requirements Δ C/C 30 % of initial value 300 % of specified limit I L specified limit Requirements Δ C/C 20 % of initial value 130 % of specified limit I L specified limit Climatic category IEC /085/56 Voltage proof of the external insulation D 25 mm: 0 V AC D > 25 mm: 2500 V AC Ø leads Up to 25 mm Ø : 0,8 mm ; more than 25 mm Ø : 1,0 mm 21

22 85 C ATBIG Electrical data and ordering code for series ATBIG capacitance (other values available on request) D x L [mm] ATBIG Hz Hz Hz 1,0 10x20 1, ,2 10x30 2, ,3 10x30 3, ,7 10x30 4, ,8 10x30 6, x x x x x x x x x x ,0 10x20 1, ,2 10x30 2, ,3 10x30 3, ,7 12x30 4, ,8 12x30 6, x x x x x x x x x x x25 1, ,2 10x30 2, ,3 10x30 3, ,7 12x30 4, ,8 14x30 6, x x x x x x x

23 85 C GM Screw terminals High CV product Long life C Features All internal contact welded High capacitance High CV product Low inductance ESL Applications Computer Inverter/drives Traction Welding RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance ± 20% range V Surge U S 315 V: U S = 1,15 > 315 V: U S = 1,10 Max. reverse / ESL 2 V / 20 nh Category temperature range - 40 C C Leakage I L after 5 Useful life C ; ; I R~ 0,008 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specified limit I L specified limit Endurance test C, Δ C/C 20 % of initial value 130 % of specified limit Requirements I L specified limit Climatic category IEC /085/56 Voltage proof of the external insulation 2500 V AC Sectional specification IEC

24 85 C GM Drawings for series GMA and GMB Fig1: GMA for ring clamp mounting Fig 2: GMB for stud mounting Dimensions and mechanical data dimensions, case with insulation sleeve connecting terminals mounting stud, GMB only D case length L available in 5 mm h a thread max. torque B max. torque [mm] [mm] [mm] [mm] [Nm] [Nm] M 5 2,0 M 8 x 12 4, M 5 2,0 M 8 x 12 4, M 5 2,0 M 12 x 16 10, ,5 M 5 2,0 M 12 x 16 10, ,7 M 5, M 6 2,0 ; 2,5 M 12 x 16 10, ,7 M 6 2,5 M 12 x 16 10,0 Remarks GMA : connecting screws M 5 or M 6 GMB : connecting screws M 5 or M 6 + mounting nut M 8 or M 12 Further mounting accessories like clamps, nylon cup nuts and insulation disks on request, see accessory equipment 24

25 85 C GM Electrical data and ordering code for series GM cap. D x L [mm] Hz, 85 C [A] Plain base: GMA Stud mounting: GMB cap. D x L [mm] Hz, 85 C [A] Plain base: GMA Stud mounting: GMB x55 6 9, x , x , x , x , x 3 17, x , x , x 2 19, x , x 2 21, x , x 1 27, x , x 1 42, x , x 1 44, x , x , x , x , x , x , x , x , x , x70 9 7, x55 9 7, x80 8 9, x70 7 9, x 5 11, x , x , x 7 11, x , x 4 14, x , x 3 17, x , x 2 29, x 1 28, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 10 8, x , x , x , x 7 10, x , x 6 11, x 5 13, x , x 3 24, x 2 23, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 16 6, x , x , x , x 11 8, x80 9 9, x 9 9, x 7 11, x , x 4 19, x 3 18, x , x , x ,

26 85 C GM cap. D x L [mm] Hz, 85 C [A] Plain base: GMA Stud mounting: GMB cap. D x L [mm] Hz, 85 C [A] Plain base: GMA Stud mounting: GMB x , x , x , x , x , x , x , x , x , x , x , x 21 6, x , x , x 18 6, x , x 14 7, x , x 12 8, x , x 7 15, x , x 5 19, x , x , x , x , x , x , x , x , x , x , x , x , x , x 23 5, x , x , x , x 16 7, x 13 7, x , x 11 9, x , x 7 14, x 6 13, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 29 5, x , x , x 24 5, x , x , x 16 6, x 14 8, x , x 9 12, x , x 6 17, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 35 4, x , x 29 4, x , x , x 24 5, x 17 7, x , x 12 11, x , x 8 15,

27 85 C GM cap. D x L [mm] Hz, 85 C [A] Plain base: GMA Stud mounting: GMB cap. D x L [mm] Hz, 85 C [A] Plain base: GMA Stud mounting: GMB x , x , x , x , x , x , x , x , x , x , x , x , x , x 64 3, x , x , x 53 3, x , x , x 43 4, x 35 5, x , x 20 8, x 17 8, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 106 2, x , x , x 85 2, x , x , x 71 3, x 58 3, x , x 33 6, x , x 23 8, x , x , x , x , x , x , x , x , x , x , x , x , x , x 136 2, x , x , x 93 2, x , x , x 74 3, x 62 3, x , x 41 6, x , x 29 6, x , x , x , x , x , x , x , x , x , x , x , x , x , x 136 2, x , x , x , x 93 2, x , x 93 2, x 62 3, x , x 41 6,

28 85 C GM 500 cap. D x L [mm] Hz, 85 C [A] Plain base: GMA Stud mounting: GMB x 34 7, x , x , x , x , x , x , x , x , x ,

29 85 C GMX Screw terminals High CV product Long life C 1. Features All internal contact welded High capacitance High CV product Long useful life Applications Computer Industrial Inverter/drives Laser RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance ± 20% range V Surge U S 315 V: U S = 1,15 > 315 V: U S = 1,10 Max. reverse / ESL 2 V / 20 nh Category temperature range - 40 C C Leakage I L after 5 Useful life C ; ; I R~ 0,008 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specified limit I L specified limit Endurance test C, Δ C/C 20 % of initial value 130 % of specified limit Requirements I L specified limit Climatic category IEC /085/56 Voltage proof of the external insulation 2500 V AC Sectional specification IEC

30 85 C GMX Drawings for series GMXA and GMXB Fig1: GMXA for ring clamp mounting Fig 2: GMXB for stud mounting Dimensions and mechanical data Dimensions, case with insulation sleeve Connecting terminals Mounting stud, GMXB only D Case length L available in 5 mm h a Thread Max. torque B Max. torque [mm] [mm] [mm] [mm] [Nm] M 5 2,0 M 8 x 12 4, M 5 2,0 M 8 x 12 4, M 5 2,0 M 12 x 16 10, ,5 M 5 2,0 M 12 x 16 10, ,7 M 5, M 6 2,0 ; 2,5 M 12 x 16 10, ,7 M 6 2,5 M 12 x 16 10,0 [Nm] GMXA : connecting screws M 5 or M 6 GMXB : connecting screws M 5 or M 6 + mounting nut M 8 or M 12 Remarks Further mounting accessories like clamps, nylon cup nuts and insulation disks on request, see accessory equipment 30

31 85 C GMX Electrical data and ordering code for series GMX cap. D x L [mm] Hz, 85 C [A] Plain base: GMXA Stud mounting: GMXB cap. D x L [mm] Hz, Hz, 85 C [A] Plain base: GMXA Stud mounting: GMXB x55 6 9, x , x , x , x , x 3 17, x , x , x 3 19, x , x 3 21, x , x 3 27, x , x 2 42, x , x 1 44, x , x , x , x , x , x , x , x , x , x , x , x , x70 9 7, x 8 9, x80 8 9, x70 8 8, x 7 11, x , x 7 11, x , x 4 15, x , x 3 24, x 2 23, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 12 8, x , x , x , x 8 9, x80 8 9, x 7 10, x 6 12, x , x 3 21, x 3 21, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 19 6, x , x , x , x 16 7, x , x 13 7, x 11 9, x , x 6 15, x 4 16, x , x , x ,

32 85 C GMX cap. D x L [mm] Hz, 85 C [A] Plain base: GMXA Stud mounting: GMXB cap. D x L [mm] Hz, 85 C [A] Plain base: GMXA Stud mounting: GMXB x , x , x , x , x , x , x , x , x , x , x , x 39 4, x , x , x , x 27 5, x 21 6, x , x 18 7, x , x 12 11, x 8 11, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 23 5, x , x , x , x 16 7, x 13 7, x , x 11 9, x , x 7 14, x 6 13, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 29 5, x , x , x , x 24 5, x 20 6, x , x 16 7, x , x 9 12, x 7 12, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 43 4, x , x , x , x 29 5, x 24 5, x , x 20 6, x , x 12 11, x 10 10, x ,

33 85 C GMX cap. D x L [mm] Hz, 85 C [A] Plain base: GMXA Stud mounting: GMXB cap. D x L [mm] Hz, 85 C [A] Plain base: GMXA Stud mounting: GMXB x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 64 3, x , x , x 53 3, x , x 43 4, x 35 5, x , x 24 7, x 20 7, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 127 2, x , x , x 106 2, x 85 3, x , x 71 3, x , x 47 5, x 40 5, x 33 5, x , x , x , x , x , x , x , x , x , x , x , x , x 199 2, x , x , x , x , x 111 2, x , x 93 2, x , x 62 3, x , x 41 6, x , x 29 6, x , x , x , x , x , x , x , x , x , x ,

34 85 C GMX 34

35 105 C G Screw terminals High CV product Long life Features All internal contact welded High performance High ripple Long useful life Applications Industrial Inverter/drives Telecommunications Laser RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance ± 20% range V Surge U S 315 V: U S = 1,15 > 315 V: U S = 1,10 Max. reverse / ESL 2 V / 20 nh Category temperature range - 40 C C Leakage I L after 5 Useful life C ; ; I R~ 0,008 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specified limit I L specified limit Endurance test C, Δ C/C 20 % of initial value 130 % of specified limit Requirements I L specified limit Climatic category IEC /105/56 Voltage proof of the external insulation 2500 V AC Sectional specification IEC

36 105 C G Drawings for series GA and GB Fig1: GA for ring clamp mounting Fig 2: GB for stud mounting Dimensions and mechanical data Dimensions, case with insulation sleeve Connecting terminals Mounting stud, GB only D Case length l h a Thread Max. torque B Max. torque available in 5 mm [mm] [mm] [mm] [mm] [Nm] [Nm] M 5 2,0 M 8 x 12 4, M 5 2,0 M 8 x 12 4, M 5 2,0 M 12 x 16 10, ,5 M 5 2,0 M 12 x 16 10, ,7 M 5, M 6 2,0 ; 2,5 M 12 x 16 10, ,7 M 6 2,5 M 12 x 16 10,0 Remarks GA : connecting screws M 5 or M 6 GB : connecting screws M 5 or M 6 + mounting nut M 8 or M 12 Further mounting accessories like clamps, nylon cup nuts and insulation disks on request, see accessory equipment 36

37 105 C G Electrical data and ordering code for series G cap. D x L [mm] Hz, 105 C [A] Plain base: GA Stud mounting: GB cap. D x L [mm] Hz, 105 C [A] Plain base: GA Stud mounting: GB x55 6 9, x , x , x , x , x 3 17, x , x , x 3 19, x , x 3 21, x , x 3 27, x , x 2 42, x , x 1 44, x , x , x , x , x , x , x , x , x , x , x , x , x70 9 7, x 8 9, x80 8 9, x70 8 8, x 7 11, x , x 7 11, x , x 4 15, x , x 3 24, x 2 23, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 12 8, x , x , x , x 8 9, x80 8 9, x 7 10, x 6 12, x , x 3 21, x 3 21, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 19 6, x , x , x , x 16 7, x , x 13 7, x 11 9, x , x 6 15, x 4 16, x , x , x ,

38 105 C G cap. D x L [mm] Hz, 105 C [A] Plain base: GA Stud mounting: GB cap. D x L [mm] Hz, 105 C [A] Plain base: GA Stud mounting: GB x , x , x , x , x , x , x , x , x , x , x , x 39 4, x , x , x , x 27 5, x 21 6, x , x 18 7, x , x 12 11, x 8 11, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 23 5, x , x , x , x 16 7, x 13 7, x , x 11 9, x , x 7 14, x 6 13, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 29 5, x , x , x , x 24 5, x 20 6, x , x 16 7, x , x 9 12, x 7 12, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 43 4, x , x , x , x 29 5, x 24 5, x , x 20 6, x , x 12 11, x 10 10, x ,

39 105 C G cap. D x L [mm] Hz, 105 C [A] Plain base: GA Stud mounting: GB cap. D x L [mm] Hz, 105 C [A] Plain base: GA Stud mounting: GB x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 64 3, x , x , x 53 3, x , x 43 4, x 35 5, x , x 24 7, x 20 7, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 127 2, x , x , x 106 2, x 85 3, x , x 71 3, x , x 47 5, x 40 5, x 33 5, x , x , x , x , x , x , x , x , x , x , x , x , x 199 2, x , x , x , x , x 111 2, x , x 93 2, x , x 62 3, x , x 41 6, x , x 29 6, x , x , x , x , x , x , x , x , x , x ,

40 105 C G 40

41 125 C GG Screw terminals Very long lifetime High CV product High-temp 125 C Low inductance ESL Features All internal contact welded High temp 125 C Long useful life Low inductance ESL Applications Computer Industrial Inverter/drives Welding Low temperature 55 C RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance ±20 % range V Surge U S Max. reverse / ESL U S = 1,15 2 V / 13 nh Category temperature range - 55 C C Leakage I L after 5 Useful life C ; ; I R~ 0,008 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specified limit I L specified limit Endurance test C, Δ C/C 20 of initial value 130 % of specified limit Requirements I L specified limit Climatic category IEC /125/56 Voltage proof of the external insulation 2500 V AC Sectional specification IEC

42 125 C GG Electrical data and ordering code for series GG cap. D x L [mm] 125 C [A] Plain base: GGA Stud mounting: GGB cap. D x L [mm] 125 C [A] Plain base: GGA Stud mounting: GGB x , x , x70 9 7, x80 8 9, x70 8 8, x 7 10, x , x70 7 9, x 7 11, x , x , x 4 14, x 3 17, x , x , x , x , x , x 11 8, x , x , x 9 9, x70 9 8, x 8 9, x80 8 9, x 5 12, x , x , x , x , x , x 21 6, x , x , x , x 14 7, x , x 12 8, x 10 9, x , x , x , x , x , x 35 4, x , x , x , x 24 5, x , x 24 5, x 16 7,

43 Special electrolyte 85 C GF Non flammable electrolyte Screw terminals High CV product Long life CGF Features All internal contact welded Self distinguishing electrolyte High capacitance High reliability Applications Industrial Inverter/drives Professional photoflash Welding RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance ± 20% range V Surge U S U S = 1,10 Max. reverse / ESL 2 V / 20 nh Category temperature range - 25 C C Leakage I L after 5 Useful life C ; ; I R~ 0,008 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specified limit I L /specified limit Endurance test C, Δ C/C 20 % of initial value 130 % of specified limit Requirements I L specified limit Climatic category IEC /085/56 Voltage proof of the external insulation 2500 V AC Sectional specification IEC

44 Special electrolyte 85 C GF Drawings for series GFA and GFB Fig1: GFA for ring clamp mounting Fig 2: GFB for stud mounting Dimensions and mechanical data Dimensions, case with insulation sleeve Connecting terminals Mounting stud, GFB only D h a Thread Max. torque B Max. torque [mm] [mm] [mm] [Nm] [Nm] M 5 2,0 M 8 x 12 4, M 5 2,0 M 8 x 12 4, M 5 2,0 M 12 x 16 10, ,5 M 5 2,0 M 12 x 16 10, ,7 M 5, M 6 2,0 ; 2,5 M 12 x 16 10, ,7 M 6 2,5 M 12 x 16 10,0 Remarks GFA : connecting screws M 5 or M 6 GFB : connecting screws M 5 or M 6 + mounting nut M 8 or M 12 Further mounting accessories like clamps, nylon cup nuts and insulation disks on request, see accessory equipment 44

45 Special electrolyte 85 C GF Electrical data and ordering code for series GF cap. D x L [mm] 85 C [A] Plain base: GFA Stud mounting: GFB x , x , x , x 74 3, x 62 4, x , x 51 4, x 41 5, x , x 24 8, x , x , x , x , x , x , x , x , x 111 3, x 93 3, x , x 74 3, x 62 4, cap. D x L [mm] 85 C [A] Plain base: GFA Stud mounting: GFB x , x 29 7, x , x , x , x , x , x , x 199 0, x , x , x , x 93 3, x , x 93 3, x 62 4, x , x 29 7, x , x , x , x , x ,

46 Special electrolyte 85 C GF 46

47 105 C GW Screw terminals High performance Ultra low inductance Heat sink mounting! Very high ripple Features All contacts welded High ripple Thermal conducting pad Best suited for heatsink mounting Applications Inverter/drives Traction Industrial Welding RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Item Characteristics capacitance range µf Capacitance tolerance ± 20% range V Surge U S 315 V: U S = 1,15 > 315 V: U S = 1,10 Max. reverse / ESL 2 V / 13 nh Category temperature range - 40 C C Leakage I L after 5 0,008 * * + 6 µa [µa] Useful life C ; ; I R~ Δ C/C 30 % of initial value 300 % of specifi ed limit Requirements I L specifi ed limit Endurance test C, Δ C/C 20 % of initial value 130 % of specifi ed limit Requirements I L specifi ed limit Climatic category IEC /105/56 Voltage proof of the external insulation 2500 V AC Sectional specifi cation IEC

48 105 C GW Drawings for series GW Fig1: Version GW for ring clamp mounting Dimensions and mechanical data Connecting terminals D h a x i Thread Max. torque [mm] [mm] [mm] [mm] [mm] [Nm] ,5 20 M 5 2, ,7 4,5 20 M 5, M 6 2,0 ; 2, ,7 4,5 20 M 6 2,5 Accessories GW : Connecting screws M 5 or M 6, further mounting accessories like clamps, nylon cup nuts and insulation disks on request 48

49 105 C GW Electrical data and ordering code for series GW cap. D x L [mm] 105 C [A] GW... cap. D x L [mm] 105 C [A] GW x , x , x 3 22, x , x , x , x , x 4 20, x , x , x , x , x 4 19, x , x , x , x , x , x 8 13, x , x , x , x , x , x 11 17, x , x , x , x , x 24 11, x , x , x , x 34 9, x , x , x , x , x , x 34 9, x , x ,

50 50

51 85 C SI Standard series SI: snap in, 2 pins SI4P: snap in, 4 pins Features All internal contact welded High CV product High reliability Long useful life Applications HiFi Computer Inverter/drives RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance ± 20% range V Surge U S Max. reverse 315 V: U S = 1,15 > 315 V: U S = 1,10 Category temperature range - 40 C C Leakage I L after 5 Useful life C ; ; I R~ 2 V 0,008 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specified limit I L specified limit Endurance test C, Δ C/C 20 of initial value 130 % of specified limit Requirements I L specified limit Climatic category IEC /85/56 Voltage proof of the external insulation 2500 V AC Sectional specification IEC

52 85 C SI Drawings for series SI and SI4P SI SI4P Fig 2: SI4P: keyed polarity 4 pin snap in version (here with 6,3 mm claw, the 4,5 mm claw is also available). Case diameter 35, 40, 45 mm only Mounting hole dimensions (mm) NC terminals must be soldered to isolated pads or pads connected to the minus potential. Fig 1: SI : Standard 2 pin snap in version and mounting hole dimensions (mm) Case diameter 25 to 45 mm only 52

53 85 C SI Electrical data and ordering code for series SI cap. D x L [mm] 85 C [A] 2 pins: SI 4 pins: SI4P x , x , x , x , x , x , x , x , x , x , x , x , x40 9 7, x35 9 7, x45 9 7, x50 7 8, x40 7 8, x45 6 9, x , x , x , x , x , x , x 3 19, x , x , x , x 2 25, x 1 27, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , cap. D x L [mm] 85 C [A] 2 pins: SI 4 pins: SI4P x , x , x , x , x , x , x50 8 8, x , x , x 6 13, x , x , x 4 17, x , x 3 19, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 8 11, x , x , x 7 12, x , x 5 15,

54 85 C SI cap. D x L [mm] 85 C [A] 2 pins: SI 4 pins: SI4P x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 13 8, x , x 11 10, x , x 7 12, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , cap. D x L [mm] 85 C [A] 2 pins: SI 4 pins: SI4P x , x , x 18 7, x , x , x , x 14 8, x 12 9, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 16 8, x , x , x , x 11 10, x 9 11, x , x , x , x , x , x , x , x , x , x , x , x , x ,

55 85 C SI cap. D x L [mm] 85 C [A] 2 pins: SI 4 pins: SI4P x , x , x , x , x , x , x , x , x , x , x , x 29 6, x , x , x 20 7, x , x 16 8, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 24 6, x , x , x 17 8, x , x 14 9, cap. D x L [mm] 85 C [A] 2 pins: SI 4 pins: SI4P 22x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 64 4, x , x , x 53 4, x , x 35 5, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x ,

56 85 C SI cap. D x L [mm] 85 C [A] 2 pins: SI 4 pins: SI4P x , x , x , x , x , x , x , x 85 3, x , x , x 71 4, x , x 47 4, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , cap. D x L [mm] 85 C [A] 2 pins: SI 4 pins: SI4P x 111 3, x , x , x 74 4, x , x 62 4, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 117 3, x , x , x 117 3, x , x 64 4,

57 85 C SI 57

58 58

59 105 C SIH Ultra compact design Long life time SIH: snap in, 2 pins SI4PH: snap in, 4 pins Features All internal contact welded High CV product High reliability Ultra compact Applications HiFi Computer Industrial Tube amplifier RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance ± 20% range V Surge U S Max. reverse 315 V: U S = 1,15 > 315 V: U S = 1,10 Category temperature range - 40 C C Leakage I L after 5 Useful life C ; ; I R~ 2 V 0,008 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specified limit I L specified limit Endurance test C, Δ C/C 20 of initial value 130 % of specified limit Requirements I L specified limit Climatic category IEC /105/56 Voltage proof of the external insulation 2500 V AC Sectional specification IEC

60 105 C SIH Drawings for series SIH and SI4PH SIH SI4PH Fig 2: SI4PG: keyed polarity 4 pin snap in version (here with 6,3 mm claw, the 4,5 mm claw is also available). Case diameter 35, 40, 45 mm only Fig 1: SIG : Standard 2 pin snap in version and mounting hole dimensions (mm) Case diameter 25 to 45 mm only Mounting hole dimensions (mm) NC terminals must be soldered to isolated pads or pads connected to the minus potential. 60

61 105 C SIH Electrical data and ordering code for series SIH cap. D x L [mm] 105 C [A] 2 pins: SIH 4 pins: SI4PH cap. D x L [mm] 105 C [A] 2 pins: SIH 4 pins: SI4PH x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x50 9 8, x , x 6 13, x , x , x , x 4 16, x 3 18, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 8 11, x60 8 9, x , x 7 12, x , x 5 15, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 17 7, x , x , x 14 8, x , x 10 10, x , x , x , x , x , x ,

62 105 C SIH cap. D x L [mm] 105 C [A] 2 pins: SIH 4 pins: SI4PH cap. D x L [mm] 105 C [A] 2 pins: SIH 4 pins: SI4PH x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 16 8, x , x 13 9, x , x 11 10, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 32 5, x , x , x , x 21 7, x 18 8, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 19 7, x , x , x , x 13 9, x 11 10, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x ,

63 105 C SIH cap. D x L [mm] 105 C [A] 2 pins: SIH 4 pins: SI4PH cap. D x L [mm] 105 C [A] 2 pins: SIH 4 pins: SI4PH x , x , x , x , x 29 6, x , x , x 20 7, x , x 16 8, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 35 5, x , x , x 29 6, x , x 20 7, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 64 4, x , x , x 53 4, x , x 35 5, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 106 3, x , x , x 85 3, x , x 58 4,

64 105 C SIH cap. D x L [mm] 105 C [A] 2 pins: SIH 4 pins: SI4PH cap. D x L [mm] 105 C [A] 2 pins: SIH 4 pins: SI4PH x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 136 2, x , x , x 93 3, x , x 74 3,

65 125 C SIG High reliabilty Long lifetime at 125 C SIG: snap in, 2 pins SI4PG: snap in, 4 pins Features All internal contact welded High temp 125 C High CV product High performance Low temperature Applications Automotive Consumer Industrial Tube amplifier RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance ± 20% range V Surge U S Max. reverse U S = 1,15 Category temperature range - 55 C C Leakage I L after 5 2 V 0,006 * * + 6 µa [µa] Useful life C ; ; I R~ 300 % of specified limit Δ C/C 30 % of initial value I L specified limit Endurance test C, 130 % of specified limit Δ C/C 20 % of initial value I L specified limit Climatic category IEC /125/56 Voltage proof of the external insulation 2500 V AC Sectional specification IEC

66 125 C SIG Drawings for series SIG and SIG4P SIG SI4PG Fig 2: SI4PG: keyed polarity 4 pin snap in version (here with 6,3 mm claw, the 4,5 mm claw is also available). Case diameter 35, 40, 45 mm only Fig 1: SIG : Standard 2 pin snap in version and mounting hole dimensions (mm) Case diameter 25 to 45 mm only Mounting hole dimensions (mm) NC terminals must be soldered to isolated pads or pads connected to the minus potential. 66

67 125 C SIG Electrical data and ordering code for series SIG cap. D x L [mm] 125 C [A] 2 pins: SIG 4 pins: SI4PG cap. D x L [mm] 125 C [A] 2 pins: SIG 4 pins: SI4PG x , x , x , x , x , x , x , x50 8 8, x , x , x , x 4 16, x 4 17, x , x , x , x , x , x , x , x50 8 9, x , x , x , x 5 15, x 3 18, x , x , x , x , x , x , x , x , x , x , x , x 7 13, x 5 16, x , x , x , x , x , x , x , x , x , x , x , x 7 13, x 5 16,

68 125 C SIG 68

69 85 C GS DIN series PCB solder pins Features All internal contact welded High CV product High reliability Long useful life Applications HiFi Consumer Industrial Inverter/drives RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance ± 20% range V Surge U S Max. reverse 315 V: U S = 1,15 > 315 V: U S = 1,10 Category temperature range - 40 C C Leakage I L after 5 Useful life C ; ; I R~ 2 V 0,008 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specified limit I L specified limit Endurance test C, Δ C/C 20 of initial value 130 % of specified limit Requirements I L specified limit Climatic category IEC /85/56 Voltage proof of the external insulation 2500 V AC Sectional specification IEC

70 85 C GS Drawings and mounting pin layout of the series GS capacitors Fig 1: Dimensions of the series GS and mounting hole layouts for D = mm NC terminals must be soldered to isolated pads or pads connected to the minus potential. 70

71 85 C GS Electrical data and ordering code for series GS cap. D x L [mm] 85 C [A] GS x , x , x , x , x , x , x , x , x40 9 7, x35 9 7, x45 9 7, x50 7 8, x40 7 8, x45 6 9, x , x , x , x , x , x , x 3 19, x , x , x , x 2 25, x 1 27, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x50 8 8, x , x , x 6 13, x , cap. D x L [mm] 85 C [A] GS x , x 4 17, x , x 3 19, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 8 11, x , x , x 7 12, x , x 5 15, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x ,

72 85 C GS cap. cap. D x L [mm] 85 C [A] GS... D x L [mm] 85 C [A] GS x , x 13 8, x , x 11 10, x , x 7 12, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 18 7, x , x , x , x 14 8, x 12 9, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 16 8, x , x , x , x 11 10, x 9 11, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 29 6, x , x , x 20 7, x , x 16 8, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x ,

73 85 C GS cap. cap. D x L [mm] 85 C [A] GS... D x L [mm] 85 C [A] GS x , x , x , x 24 6, x , x , x 17 8, x , x 14 9, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 64 4, x , x , x 53 4, x , x 35 5, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 85 3, x , x , x 71 4, x , x 47 4, x 58 4, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 111 3, x , x , x 74 4, x , x 62 4, x , x , x , x , x , x , x , x , x , x , x , x ,

74 85 C GS cap. cap. 500 D x L [mm] 85 C [A] GS x , x , x , x , x , x , x , D x L [mm] 85 C [A] GS x , x 117 3, x , x , x 117 3, x , x 64 4,

75 105 C GSH DIN series Ultra compact design Long life time PCB solder pins Features All internal contact welded High CV product High reliability Ultra compact Applications HiFi Computer Industrial Tube amplifier RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance ± 20% range V Surge U S Max. reverse 315 V: U S = 1,15 > 315 V: U S = 1,10 Category temperature range - 40 C C Leakage I L after 5 Useful life C ; ; I R~ 2 V 0,008 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specified limit I L specified limit Endurance test C, Δ C/C 20 % of initial value 130 % of specified limit Requirements I L specified limit Climatic category IEC /105/56 Voltage proof of the external insulation 2500 V AC Sectional specification IEC

76 105 C GSH Drawings and mounting pin layout of the series GSH capacitors Fig 3: Dimensions of the series GSH and mounting hole layouts for D = mm NC terminals must be soldered to isolated pads or pads connected to the minus potential. 76

77 105 C GSH Electrical data and ordering code for series GSH cap. D x L [mm] 105 C [A] GSH x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x50 9 8, x , x 6 13, x , x , x , x 4 16, x 3 18, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 8 11, x60 8 9, cap. D x L [mm] 105 C [A] GSH x , x 7 12, x , x 5 15, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 17 7, x , x , x 14 8, x , x 10 10, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x ,

78 105 C GSH cap. D x L [mm] 105 C [A] GSH... cap. D x L [mm] 105 C [A] GSH x , x 16 8, x , x 13 9, x , x 11 10, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 32 5, x , x , x , x 21 7, x 18 8, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 19 7, x , x , x , x 13 9, x 11 10, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 29 6, x , x , x 20 7, x , x 16 8, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x ,

79 105 C GSH cap. D x L [mm] 105 C [A] GSH... cap. D x L [mm] 105 C [A] GSH x , x , x , x 35 5, x , x , x 29 6, x , x 20 7, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 64 4, x , x , x 53 4, x , x 35 5, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 106 3, x , x , x 85 3, x , x 58 4, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 136 2, x , x , x 93 3, x , x 74 3,

80 105 C GSH 80

81 125 C GSG DIN series High reliability Long lifetime at 125 C PCB solder pins Features All internal contact welded High temp 125 C High CV product High performance Low temperature 55 C Applications HiFi Automotive Consumer Traction General specifications Items RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. Characteristics capacitance range µf Capacitance tolerance ± 20% range Surge U S V U S = 1,15 Max. reverse Category temperature range - 55 C C Leakage I L after 5 2 V 0,006 * * + 6 µa [µa] Useful life C ; ; I R~ 300 % of specified limit Δ C/C 30 % of initial value I L specified limit Endurance test C, 130 % of specified limit Δ C/C 20 % of initial value I L specified limit Climatic category IEC /125/56 Voltage proof of the external insulation 2500 V AC Sectional specification IEC

82 125 C GSG Drawings and mounting pin layout of the series GSG capacitors Fig 1: Dimensions of the series GSG and mounting hole layouts for D = mm NC terminals must be soldered to isolated pads or pads connected to the minus potential. 82

83 125 C GSG Electrical data and ordering code for series GSG cap. D x L [mm] 125 C [A] GSG x , x , x , x , x , x , x , x50 8 8, x , x , x , x 4 16, x 4 17, x , x , x , x , x , x , x , x50 8 9, x , x , x , x 5 15, x 3 18, cap. D x L [mm] 125 C [A] GSG x , x , x , x , x , x , x , x , x , x , x , x 7 13, x 5 16, x , x , x , x , x , x , x , x , x , x , x , x 7 13, x 5 16,

84 125 C GSG 84

85 85 C LF Standard series Photoflash Solder lug pins Features All contacts welded Soldering lug terminals High capacitance Long useful life Applications HiFi Consumer Industrial Telecommunications RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance ± 20% range V Surge U S Max. reverse 315 V: U S = 1,15 > 315 V: U S = 1,10 Category temperature range - 40 C C Leakage I L after 5 Useful life C ; ; I R~ 2 V 0,008 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specifi ed limit I L specifi ed limit Endurance test C, Δ C/C 20 % of initial value 130 % of specifi ed limit Requirements I L specifi ed limit Climatic category IEC /85/56 Voltage proof of the external insulation 2500 V AC Sectional specifi cation IEC

86 85 C LF Drawings for series LFA and LFB LFA LFB Fig 1: Version LFA for clamp mounting Fig 2: Version LFB for stud mounting D h a B [mm] [mm] [mm] M 8 x M 8 x M 8 x M 8 x M 12 x 16 Thread Max. tightening torque Mounting M 8 4 Nm Mounting M Nm 86

87 85 C LF Electrical data and ordering code for series LF cap. D x L [mm] 85 C [A] Plain base: LFA Stud mounting: LFB cap. D x L [mm] 85 C [A] Plain base: LFA Stud mounting: LFB x , x , x , x , x , x , x , x , x40 9 7, x35 9 7, x45 9 7, x50 7 8, x40 7 8, x45 6 9, x , x , x , x , x , x , x 3 19, x , x , x , x 2 25, x 1 27, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x50 8 8, x , x , x 6 13, x , x , x 4 17, x , x 3 19, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 8 11, x , x , x 7 12, x , x 5 15, x , x , x , x , x , x , x , x , x , x , x , x , x , x ,

88 85 C LF cap. D x L [mm] 85 C [A] Plain base: LFA Stud mounting: LFB x , x , x , x , x , x 13 8, x , x 11 10, x , x 7 12, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 18 7, x , x , x , x 14 8, x 12 9, x , x , x , x , x , x , x , x , x , x , x , x , x , x , cap. Case size D x L [mm] 85 C [A] Plain base: LFA Stud mounting: LFB x , x , x , x , x , x 16 8, x , x , x , x 11 10, x 9 11, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 29 6, x , x , x 20 7, x , x 16 8, x , x , x , x , x , x , x , x , x , x , x , x , x ,

89 85 C LF cap. D x L [mm] 85 C [A] Plain base: LFA Stud mounting: LFB cap. D x L [mm] 85 C [A] Plain base: LFA Stud mounting: LFB x , x , x , x , x , x , x , x 24 6, x , x , x 17 8, x , x 14 9, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 64 4, x , x , x 53 4, x , x 35 5, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 85 3, x , x , x 71 4, x , x 47 4, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 111 3, x , x , x 74 4, x , x 62 4, x , x , x , x , x , x , x ,

90 85 C LF 500 cap. D x L [mm] 85 C [A] Plain base: LFA Stud mounting: LFB x , x , x , x , x , x , x , x , x , cap. D x L [mm] 85 C [A] Plain base: LFA Stud mounting: LFB x , x , x , x 117 3, x , x 117 3, x , x , x 64 4,

91 105 C LFH Ultra compact design Photoflash Solder lug pins Features All contacts welded Soldering lug terminals High reliability Stud mounted Applications Laser Welding Tube amplifi er Telecommunications RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance ± 20% range V Surge U S Max. reverse 315 V: U S = 1,15 > 315 V: U S = 1,10 Category temperature range - 40 C C Leakage I L after 5 Useful life C ; ; I R~ 2 V 0,008 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specifi ed limit I L specifi ed limit Endurance test C, Δ C/C 20 % of initial value 130 % of specifi ed limit Requirements I L specifi ed limit Climatic category IEC /105/56 Voltage proof of the external insulation 2500 V AC Sectional specifi cation IEC

92 105 C LFH Drawings for series LFHA and LFHB LFHA LFHB Fig 1: Version LFHA for clamp mounting Fig 2: Version LFHB for stud mounting D h a B [mm] [mm] [mm] M 8 x M 8 x M 8 x M 8 x M 12 x 16 Thread Max. tightening torque Mounting M 8 4 Nm Mounting M Nm 92

93 105 C LFH Electrical data and ordering code for series LFH cap. Case size D x L [mm] Hz, 105 C [A] Plain base: LFHA Stud mounting: LFHB cap. Case size D x L [mm] 105 C [A] Plain base: LFHA Stud mounting: LFHB x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x50 9 8, x , x 6 13, x , x , x , x 4 16, x 3 18, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 8 11, x60 8 9, x , x 7 12, x , x 5 15, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 17 7, x , x , x 14 8, x , x 10 10, x , x , x , x , x , x , x , x , x , x , x , x , x , x ,

94 105 C LFH cap. Case size D x L [mm] Hz, 105 C [A] Plain base: LFHA Stud mounting: LFHB 00 35x , x , x , x , x , x 16 8, x , x 13 9, x , x 11 10, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 32 5, x , x , x , x 21 7, x 18 8, x , x , x , x , x , x , x , x , x , x , x , x , x , x , cap. Case size D x L [mm] Hz, 105 C [A] Plain base: LFHA Stud mounting: LFHB x , x , x , x , x , x 19 7, x , x , x , x 13 9, x 11 10, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 29 6, x , x , x 20 7, x , x 16 8, x , x , x , x , x , x , x , x , x , x , x , x , x ,

95 105 C LFH cap. Case size D x L [mm] Hz, 105 C [A] Plain base: LFHA Stud mounting: LFHB x , x , x , x , x , x , x , x 35 5, x , x , x 29 6, x , x 20 7, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 64 4, x , x , x 53 4, x , x 35 5, x , x , x , x , x , x , x , cap. Case size D x L [mm] Hz, 105 C [A] Plain base: LFHA Stud mounting: LFHB x , x , x , x , x , x , x , x , x , x , x , x , x , x 106 3, x , x , x 85 3, x , x 58 4, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x 136 2, x , x , x 93 3, x , x 74 3,

96 105 C LFH 96

97 85 C S/SZ Central mounting SZ: Double capacitance 85 C Features All contacts welded Central mounting Soldering lug terminals High mechanical stability Applications Industrial Tube amplifi er SMPS RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance % range V Surge U S Max. reverse 315 V: U S = 1,15 > 315 V: U S = 1,10 Category temperature range S, SZ - 40 C C Leakage I L after 5 Useful life C ; ; I R~ Endurance test 2 V 0,008 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specifi ed limit I L specifi ed limit C, Requirements Δ C/C 20 % of initial value 130 % of specifi ed limit I L specifi ed limit Climatic category IEC /85/56 Voltage proof of the external insulation 2500 V AC Sectional specifi cation IEC

98 85 C S/SZ Drawings for series S and SZ S SZ Electrical data and ordering code for series S Electrical data and ordering code for series S cap. Case size D x L [mm] Hz, tan δ Hz max. [%] Hz, 85 C [A] x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , S cap. D x L [mm] Hz, tan δ Hz max. [%] Hz, 85 C [A] x , x , x , x , x , x , x , x , x , Electrical data and ordering code for series SZ cap. Case size D x L [mm] Hz, tan δ Hz max. [%] Hz, 85 C [A] S... SZ x , x , x , x , x , x , x ,

99 85 C S/SZ 99

100

101 105 C SH Central mounting Features All contacts welded Central mounting Soldering lug terminals High reliability Applications HiFi Signalization Industrial RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range µf Capacitance tolerance -10; +30 % range V Surge U S Max. reverse 315 V: U S = 1,15 > 315 V: U S = 1,10 Ctegory temperature range S, SZ - 40 C C Leakage I L after 5 Useful life C ; ; I R~ 2 V 0,008 * * + 6 µa [µa] Requirements Δ C/C 30 % of initial value 300 % of specifi ed limit I L specifi ed limit Endurance test C, Δ C/C 20 % of initial value 130 % of specifi ed limit Requirements I L specifi ed limit Climatic category IEC /105/56 Voltage proof of the external insulation 2500 V AC Sectional specifi cation IEC

102 105 C SH Drawings for series SH Electrical data and ordering code for series SH cap. Case size D x L [mm] Hz, tan δ Hz max. [%] Hz, 105 C [A] SH... cap. Case size D x L [mm] Hz, tan δ Hz max. [%] Hz, 105 C [A] SH x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x , x ,

103 105 C SH 103

104 104

105 MDK Features Insulated aluminium can Protection according to IP 54 Connection cable Double potted design VDE approval for selected products Applications Motorstart Whitegood motorcontrol RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics Clima category 10/060/21 Tolerance ±10% Specs. for selected items VDE DIN EN Content of supply Terminals If mounting stud then with fi xing nut Connection cable: normal length 300mm or custom-tailored The alternated load may occur at most 20 times per hour with the following values: Percentage duty cycle AB 0,55 % ED AB 1,50 % ED AB 1,70 % ED loading 20 turn-ons with each 1,0 sec duration 20 turn-ons with each 2,7 sec duration 20 turn-ons with each 3,0 sec duration 105

106 MDK Drawings for series MDK Standard Values Type MDK ~ Hz Hz Hz Dx L VDE sign Plain base: MDKA ~ Hz Hz Hz Dx L VDE sign Plain base: MDKA [%] [%] [mm] Stud mounting: MDKB [%] [%] [mm] Stud mounting: MDKB 160 V ~ 320 V ~ 1,70 1,36 36,8 x , ,70 1,36 36,8 x , ,70 1,36 36,8 x , ,70 1,36 36,8 x , ,70 1,36 36,8 x , ,70 1,36 36,8 x , ,70 1,36 36,8 x , ,70 1,36 36,8 x , ,70 1,36 36,8 x , ,70 1,36 41,8 x , ,70 1,36 41,8 x , ,70 1,36 41,8 x , ,70 1,36 51,8 x , ,55 0,44 36,8 x , ,55 0,44 36,8 x , ,55 0,44 36,8 x ,8083 0,55 0,44 36,8 x , ,55 0,44 36,8 x , ,55 0,44 36,8 x , ,55 0,44 41,8 x , V ~ 180 0,55 0,44 41,8 x , ,55 0,44 41,8 x , ,55 0,44 51,8 x , ,55 0,44 51,8 x , ,70 1,36 36,8 x 72 yes 32036, ,70 1,36 36,8 x 72 yes , ,70 1,36 36,8 x 72 yes , ,70 1,36 36,8 x 72 yes , ,70 1,36 36,8 x 72 yes , ,70 1,36 36,8 x 72 yes , ,70 1,36 36,8 x 85 yes , ,70 1,36 36,8 x 85 yes , ,70 1,36 36,8 x 85 yes , ,70 1,36 41,8 x 85 yes , ,70 1,36 41,8 x 85 yes ,8085 1,70 1,36 41,8 x 85 yes , ,70 1,36 51,8 x 85 yes , ,70 1,36 51,8 x , ,70 1,36 51,8 x , ,70 1,36 51,8 x ,8118 Please state additionally to your order: cable length (normal length 300mm) with or without discharge resistor ( 22 / 47 / kw ) 106

107 MEK Features With cap and connecting cable or plug in tags With clamp attachment or mounting stud Cable outcomming radial or axial VDE approval for selected products Applications Motorstart Whitegood motorcontrol RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics Clima category 10/060/21 Tolerance ±10% Specs. for selected items VDE DIN EN Terminals Cap and cable or faston tags 4,8 mm, 6,3 mm single and double The alternated load may occur at most 20 times per hour with the following values: Percentage duty cycle AB 0,55 % ED AB 1,50 % ED AB 1,70 % ED 20 turn-ons with each 1,0 sec duration 20 turn-ons with each 2,7 sec duration 20 turn-ons with each 3,0 sec duration 107

108 MEK Drawings for series MEK Standard values type MEK Special versions of the MEK ~ Hz Hz Hz D x L / with cap VDE sign ~ Hz Hz D x L VDE sign 320 V ~ MEK [%] [%] [mm] 10 1,70 1,36 35x51 / 70 yes ,70 1,36 35x 66 / 85 yes ,70 1,36 35x 66 / 85 yes ,70 1,36 35x 66 / 85 yes ,70 1,36 35x 66 / 85 yes ,70 1,36 35x 66 / 85 yes ,70 1,36 35x 66 / 85 yes ,70 1,36 35x 66 / 85 yes ,70 1,36 35x 66 / 85 yes ,70 1,36 40x 66 / 85 yes ,70 1,36 40x 66 / 85 yes ,70 1,36 40x 66 / 85 yes ,70 1,36 50x 66 / 112 yes ,70 1,36 50x 96 / ,70 1,36 50x 96 / ,70 1,36 50x 96 / ,70 1,36 50x 96 / [%] [mm] MEK 320 V ~ 95 0,60 35 x V ~ 220 0,55 35 x Please state additionally to your order: with or without cap cable length with or without discharge resistor 22 kw, 47 kw ( Standard ), kω 108

109 E-Type Pulse and Photoflash capacitors Outstanding charge-discharge characteristic High reliability A, SI, LF and G Terminals available Features All contacts welded Charge/discharge proof High CV product High fl ash frequencies Applications Photofl ash Warning and safety lamps Laser Hair removal RoHS compliant REACH compliant Different case sizes, s and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics capacitance range Up to Hz Capacitance tolerance ± 10%; -10%/+30% rated Up to 500 V Number of fl ashes Depending on application Category temperature range - 55 C /+70/+85/+105 C Climatic category IEC /105/56 Voltage proof of the external insulation 2500 V AC 109