MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. High frequency,low impedance. Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc.
|
|
|
- Paula Loreen Cook
- 5 years ago
- Views:
Transcription
1 S YD286 Series High frequency,low edance 105, 2000 hours Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc. Specifications: Item Characteristics Rated Voltage Range: 6.3V ~100VDC Operating Temperature -55 ~+105 acitance Tolerance : +/-20%(M) ( at 20, at 120Hz) I=0.02CV or 3(μA), whichever is greater,(20,2 minutes) Leakage Current (μa) Dissipation Factor (tgδ) 20, 120Hz Shelf Life where : I: max.leakage (μa) C: Nominal capacitance () V: Rated voltage (at 20, 2 minutes) U R (V) V 16V 25V 35V 50V 63V 100V tanδ(max) when the capacitance exceeds 1000, shall be added every 1000 increase. the following specifications shall be satisfied when the capacitors are restored to 20 after exposing them at 105 for 1000 hours without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements. acitance Change Dissipation Factor tgδ Leakage Current Within ±20% of the initial value 200% of the specified value the initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage with the reated ripple is applied at 105 for the specified periode of time Load Life Case size Dia ΦD 8 Test times 1000 hours ΦD>8 2000hours acitance Change ±20% of the initial value Dissipation Factor tgδ 200% of the specified value Leakage Current the initial specified value Others GB/T Page 1 of 6
2 DIMENSIONS OF YD286 Series ΦD ±0.5 ±1.0 5~ ~18 F± ~ ΦD± a 0~+1.0 Multiplier for ripple : Freq.(Hz).(uF) 120 1K 10K 100K 0.47~4.7uF ~ ~ ~1000uF ~ Temperature Coefficient Temperature Factor How To Order : YD286 50V 2200uF M Case Size acitance tolerance Nominal capacitance Rated voltage in Volts Series name: YD286 Low ediance,high ripple capacitor Page 2 of 6
3 6.3V 10v uF uF Case Size (marms /105,100KHz) Page 3 of 6
4 16V 25v Case Size page 4 of 6 (marms /105,100KHz)
5 35V 50v uF (marms /105,100KHz) Case Size page 5 of 6
6 63V 100v Μf Case Size (marms /105,100KHz) Page 6 of 6
Aluminum Electrolytic Capacitor JNK
FEATES Extended Lifetime at High ripple current High Professional Switch Mode Power Supplies Frequency Converters SPECIFICATIONS Items Performance Characteristics Operating Temperature Range ( ) -40 ~
Snap-in Type Aluminium Electrolytic Capacitors
Endurance: 85 2000hours Recommended Applications : Applying to switching power supply and other industry/ commercial field Corresponding product to RoHS SPECIFICATIONS Item Category Temperature Range -40~+85
Radial Type Aluminium Electrolytic Capacitors
SH Radial Type Aluminium Electrolytic acitors Endurance: 105 2000hours SH Recommended Applications :For high quality, reliability application, high CV product High Temperature Corresponding product to
Snap-in Type Aluminium Electrolytic Capacitors
Endurance:105 3000 hours Recommended Applications : Smoothing circuit, TV/Monitor,Adapter, SMPS Corresponding product to RoHS Long Life LG SPECIFICATIONS Item Category Temperature Range Range Rated acitance
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS. (at 20 after 5 minutes) Dissipation Factor (tanδ) 420 & 450V 0.20
from KMQ series Endurance with ripple : 2,000 to 3,000 hours at 105 Non solvent resistant type RoHS Compliant LXS P246 KMS P225 Downsized LXQ P249 KMM KMQ P215 SPECIFICATIONS Items Category Temperature
16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:
T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working
For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k
T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal
tan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0
Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant
ESC Aluminum Electrolytic Capacitors
H Description S Capacitors for high frequency applications. H Applications S Computers switching regulator mother board output. H Features S Case with D 6.0 mm has the safety vent at the bottom. H Diagram
Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type
Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. I=0.01CV or 3(uA) after 2 minutes with rated working voltage
series +105,High ( ), Low ( ) FEATURES Load life:105 2000 ~4000hours Enabled high ripple current by a reduction of ESR at high frequency range switching power supply SPECIFICATIONS s Characteristics Category
Low ESR and High Frequency Radial Electrolytic Capacitor. TZE Series. Features. Applications. Dimensions (in mm)
Low ESR and High Frequency Radial Electrolytic Capacitor Low ESR and High Frequency Radial Electrolytic Capacitor Features Radial leads, cylindrical aluminum case Low impedance and high frequency High
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice. 1. Features Ultra Low & high ripple
55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A
Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:
Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
Summary of Specifications
Series Large Can Screw Terminal 85 C General Purpose High Ripple Current Capability Extended Range to 550VDC Dimensions in Inches The series is ideal for inverter applications requiring high ripple current
KMG Series. Miniature General Purpose Solvent Proof 105 C Maximum Temperature
Miniature General Purpose Solvent Proof 5 C Temperature The series capacitors are designed for general purpose use with an operating temperature range for most of these capacitors from 55 C to 5 C. The
Large Can Aluminum Electrolytic Capacitors
FEATURES LONG LIFE AT +105 C (2,000 ~ 3,000 HOURS) HIGH RIPPLE CURRENT HIGH VOLTAGE (UP TO 500VDC) SUITABLE FOR SWITCHING POWER SUPPLIES SPECIFICATIONS *See System for Details Operating Temperature Range
Summary of Specifications
Miniature General Purpose Solvent Proof Large and Small 85 C Temperature Actual Size The series capacitors are a miniaturized version of the SME series. These capacitors are designed for a load life of,000
LPH Large Capacitance Aluminum Electrolytic Capacitors
Series LPH 105 C, Miniaturized, High-Reliability, High-Ripple Capacitors ULTRAMINI, HIGH RELIABLILITY TYPE Smaller-sized and higher-ripple than L3J. Guaranteed for 2000 hours at 105 C. Outline Drawing
Radial Aluminium Electrolytic Capacitors 105 C
Radial Aluminium Electrolytic Capacitors 105 C Standard, miniaturized, Endurance 1.000h to 2.500h at 105 C Rated voltage range: 6,3V to 100V, Rated capacitance range: 0,47µF to 12.000µF range: Ø 5,5 x
Summary of Specifications
Series Snap Mount Large High CV High Ripple RoHS Compliant 85 C Maximum Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life
Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550
Standard capacitors Applications Frequency converters Uninterruptible power supplies All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Specifications
SMM SERIES Engineering Bulletin Mar 07
Series SERIES Snap Mount Downsize High Long Life RoHS Compliant 85 C Maximum Temperature The series is a high voltage, long life snap-in capacitor series that offers downsized versions of the SMH series.
Miniature Aluminum Electrolytic Ca pac i tors
ULTRA LOW IMPEDANCE, RADIAL LEADS, POLARIZED, ALUMINUM ELEC TRO LYT IC FEATURES VERY LOW IMPEDANCE LONG LIFE AT 105 C (1000 ~ 5000 hrs.) HIGH STABILITY AT LOW TEMPERATURE IDEALLY FOR SWITCHING POWER SUPPLIES
-40 to C 6.3 to 50 V.DC 22 to 6800 µ F ±20 % (120Hz/+20 C) I < 0.01 CV (µa) after 2 minutes application of rated working voltage at +20 C
Radial Type Series: FM Type :A n Features Low impedance(40 to 70% less than FC Series) Endurance : 2000 to 7000 hours at +105 C Country of Origin Japan Malaysia China n s Category temp. range Rated W.V.
4.0±0.5 (3.5) Top of spin. Standard terminal type does not require terminal trimming peocess.
Snap-in Type Series: HC Type: TS Features 30 % smaller than series TS-HB RoHS directive compliant Specifi cations Category Temp. Range 40 C to +105 C 25 C to +105 C Rated Range 10 V.DC to 100 V.DC 160
Long life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options
TS-HC Series 105 C, 2000 hours Long life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options RoHS Compliant Rated
W.V. (V) tan δ For capacitance value > 1000 µf, add 0.02 per every 1000 µf.
Radial Lead Type Series: FC Type: A Features Endurance : 105 C h to 5000 h Low impedance RoHS directive compliant Specifi cations Category Temp. Range 55 C to +105 C Rated Range 6.3 V.DC to 100 V.DC Nominal
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial ead Type Series : FC Type : A Features : 105 C h to 5000 h ow impedance RoHS compliant Specifications Category temperature range 55 C to +105 C Rated voltage range 6.3 V.DC to 100 V.DC Capacitance
Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial ead Type Series : M Type : A Features Smaller than series SU RoHS compliant Specifications Category temperature range 40 C to + 85 C 25 C to +85 C range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC
Type 381EL 105 ºC Ultra-Long Life Snap-In, Aluminum More than 100,000 Hours Operation at 65 C and Rated 105 C Ripple OBSOLETE
Specifications Temperature Range Rated Voltage Range 160 to 450 Vdc Capacitance Range 39 µf to 2,200 µf ± 20% Capacitance Tolerance ± 20% Leakage Current Ripple Current Multipliers The new 381EL extends
ALUMINUM ELECTROLYTIC CAPACITORS
Application Guidelines 1-1-1. Circuit Design (1) Please make sure the application and mounting conditions to which the capacitor will be exposed are within the conditions specified in the catalog or alternate
DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents
DATA SHEET Supersedes data of 18th January 2000 File under BCcomponents, BC01 2000 Apr 07 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case,
Frequency (Hz) 50, k 10 k to Correction factor min. 3 min.
Radial Lead Type Series: M Type: A Features Smaller than series SU RoHS directive compliant Specifi cations Category Temp. Range 40 C to + 85 C 25 C to +85 C Rated Range 6.3 V.DC to 100 V.DC 160 V.DC to
ALS40. ALS41 Stud Mounting
31 This range offers high CV per unit volume coupled with high ripple currents and long life performance at 105 C. They are also capable of handling high peak voltages and currents. Capacitance range...
ALS30. ALS31 Stud Mounting
25 This range offers high CV per unit volume coupled with high ripple currents and long life performance. They are also capable of handling high peak voltages and currents. Capacitance range... 68µF to
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR 1 Application Guidelines 1. Polarity CSCAP is solid aluminum electrolytic capacitors with positive and negative electrodes. Do not reverse the polarity when
Summary of Specifications
Series Large Can Screw Terminals High Ripple 6.3 to 400VDC Range Dimensions in Inches RoHS Compliant 105 C Maximum Temperature The series allows for extremely high ripple currents for applications such
Wet Tantalum Tubular Capacitors
Castanet Tantalum Capacitors Wet Tantalum Tubular Capacitors CECC & ESA Axial & Surface Mount MIL-PRF-39006C Axial DSCC Drawing 93026 Axial High Temperature 200 C Axial & Surface Mount 150 Volt Rated Axial
SWITCH-MODE CERAMIC CAPACITORS
Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and
U36D SERIES Engineering Bulletin Mar 07
Series SERIES Large Can Screw Terminals High Ripple Up to 550VDC Dimensions in Inches RoHS Compliant 85 C Maximum Temperature The series is ideal for inverter applications requiring high ripple current
Contents CORNELL DUBILIER
Contents Products Listed by Type Designation........................................................ Chip and SMT Selector Guide................................................................... 1.001
Size code Rated W.V. Cap. change. 4 W.V to 50 W.V. 6.3 W.V > 10 W.V 1000 hours ±20 % < 200 % initial specifi ed value
Surface Mount Type Series: S Type: V Features Endurance: 85 C 2000 h Vibration-proof product is available upon request. (φ8 mm and larger) RoHS directive compliant s Category Temp. Range 40 C to +85 C
Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size
Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching
K05 TYPE -40 C +105 C 5000H
K05 TYPE -40 C +105 C 5000H Surge-proof capacitor in aluminium can with insulation sleeve Safety vent at bottom case or aside case. Snap in terminals for PCB mounting. Very high CV for unit volume with
Type 381LX / 383LX 105 C High Ripple, Snap-In Aluminum High Ripple, Long Life, 2, 4 and 5 pin styles available
High Ripple, Long Life, 2, 4 and 5 pin styles available Specifications Temperature Range Rated Voltage Range Adding longer-life and more ripple capability to the excellent value of Type 380L/LX capacitors,
Type 380LX / 382LX 85 C High Capacitance, Snap-In Aluminum
The excellent value of Type 380L/LX capacitors finds application in switching power supply input and output circuits and even motor drives where the high surface area of multiple units in parallel approaches
CapXon LD Series LD Series H Features Updated Series Preliminary Data Sheet Standard capacitors
Updated Series Preliminary Data Sheet 85 5000H Features Standard capacitors Applications Switch-mode power supplies in industrial and entertainmentelectronics Uninterruptible power supplies Features High
Technical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF
www.niccomp.com/pcn Technical Support: tpmg@niccomp.com October 28 th 2016 SUB: EOL End of Life Notification Products impacted by this notice: NPC Series SMT Solid Polymer Aluminum Electrolytic Capacitors
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105
YAGEO Corporation Date: 01/17/2007
YAGEO Corporation Date: 01/17/2007 Aluminum Electrolytic Capacitors File:2052 Engineering Bulletin for SK Type Page: 1/7 SK Type +85ºC Single-ended lead aluminum electrolytic capacitors for the rated voltage
Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size
Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching
Surface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
TANCAP TECHNOLOGY CO., LTD.
TB SERIES FEATURES - Capacitance : 0.1uF to 330uF - Current Test on Each Size - Capacitance Tolerance: ±5%(K), ±10%(K), ±20%(M) - Voltage : 4V DC to 50V DC CASE DIMENSIONS AND MARKINGS Forming C : 2. Forming
Country of Origin. Standard. -40 to + 85 C 6.3 to 100 V.DC 0.1 to µ F ±20 % (120Hz/+20 C) Please see the attached standard products list
= Radial Lead Type M Series: Type : n Features A Endurance:85 C 2000 h Smaller than series SU RoHS directive compliant Standard Country of Origin Japan Malaysia China n Specifications Category temp.range
YAGEO Corporation Date: 2/22/2011
YAGEO Corporation Date: 2/22/2011 Aluminum Electrolytic Capacitors File:2052 Engineering Bulletin for SK Type Page: 1/29 SK Type +85ºC Single-ended lead aluminum electrolytic capacitors for the rated voltage
Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
6.3 W.V < D(06.3) Miniature > 10 W.V 1000 hours ±20 %
Surface Mount Type Series: S Type: V Features Endurance: 85 C 2000 h Vibration-proof product is available upon request. (08 mm and larger) AEC-Q200 qualifi ed RoHS directive compliant s Category Temp.
YAGEO Corporation Date: 01/17/2007
YAGEO Corporation Date: 01/17/2007 Aluminum Electrolytic Capacitors File:2063 Engineering Bulletin for SC Type Page: 1/7 SC Type -40 to +105 C Very low impedance and ESR, miniature aluminum electrolytic
ALS30 Series 85 C. RoHS. Compliant
ALS30 Series Compact size Long life, 20000 hours at (Ur, Ir applied High ripple current Excellent surge voltage capability Optimized designs available on request RoHS Compliant application Basic design
150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
MIL-PRF Series. Military Conventional Wet Tantalum OUTLINE DIMENSIONS. CASE DIMENSIONS: millimeters (inches)
This data sheet contains the MIL-PRF-39006 ratings for which AVX is a qualified approved supplier. This will be continually updated as the qualification expands. For COTS-Plus equivalent ratings please
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800μF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Japan Malaysia China. Frequency(Hz) k 10k 100k 1.0 to φ10. ( 6.3mm dia) Vent P±0.5
Radial Lead Type Series: FC Type :A Features Endurance : 5 C 00 h to 5000 h Low impedance Japan Malaysia China Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance
Cylindrical Types, High-Voltage Mica Capacitors Types 291, 292, 293, 294 Cylindrical Case, High-Current and High-Voltage Circuits
Types 291, 292, 293, 294 Cylindrical Case, High-Current and High-Voltage Circuits Specifications acitance Range: 47 pf to 0.1 µf Voltage Range: 1 to 30 kvpk acitance Tolerance: ±2% (G), ±5% (J) Temperature
Summary of Specifications
Large an Screw erminals Longer Life U36 Grade High Ripple 350 to 500VD Ratings RoHS ompliant 85 Maximum emperature he series is a longer life version of the industry standard U36D specifically designed
OBSOLETE. General Specifications. Key Features. Applications. Outline Dimensions CLR 79 (MIL-C-39006/22) CLR 81 (MIL-C-39006/25)
General Specifications Operating : Working Voltage: Key Features Applications -55 C to +125 C, with voltage derating above 85 C, ( voltage at 125ºC is 2/3 of the value at 85ºC) 6 to 125 WVdc Tolerance:
CROSS-SECTION CONSTRUCTION
Skywell s OP-CON is aluminum solid electrolytic capacitor that uses organic semiconductors as electrolytes. Organic semiconductor has a high conductivity and high-temperature stability, therefore OP-CON
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
ALC40 Series 105 C. RoHS. Compliant
ALC40 Series Compact Long life, 9000 hours at 105 C (Ur, Ir applied High ripple current Excellent surge voltage capability Optimized designs available on request RoHS Compliant application Suited for high
ALC10 Series 85 C. RoHS. Compliant
ALC10 Series Compact size Long Life, 18000 hours at (Ur, Ir applied High ripple current Excellent surge voltage capability Optimized designs available on request RoHS Compliant application They are ideally
handbook, halfpage 059 PLL-SI 200 V, 250 V, 400 V, 450 V Category temperature range 25 to +105 C Endurance test at 105 C
FEATURES Polarized aluminium electrolytic capacitors, non-solid arge types, very small dimensions, cylindrical aluminium case, insulated with a blue sleeve Pressure relief on the top of the aluminium case
Data Sheet. Aluminum electrolytic capacitors Alu-X product lines. Single-ended capacitors. Date: August 2008
Aluminum electrolytic capacitors Alu-X product lines Single-ended capacitors Series/Type: Data Sheet Date: August 2008 EPCOS AG 2008. Reproduction, publication and dissemination of this publication and
handbook, halfpage lower RLL 116
FEATURES Polarized aluminium electrolytic capacitors, non-solid Radial leads, cylindrical aluminium case with pressure relief, insulated with a blue vinyl sleeve Charge and discharge proof Long useful
Cylindrical Types, High-Voltage Mica Capacitors Types 291, 292, 293, 294 Cylindrical Case, High-Current and High-Voltage Circuits
Types 291, 292, 293, 294 Cylindrical Case, High-Current and High-Voltage Circuits Designed for frequencies ranging from 100 khz to 3 MHz, Mica Capacitor Types 291, 292, 293 and 294 are well suited for
Aluminum Capacitors Power High Ripple Current Screw Terminals
101/102 PHR-ST Aluminum Capacitors FEATURES ST STB Fig.1 Component outline Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated with a blue
Standard and Low Profile Tantalum Microchip Capacitors. STANDARD CASE DIMENSIONS: millimeters (inches)
FEATURES The world s smallest surface mount tantalum capacitor CV range: 0.10-150μF / 2-25V 11 case sizes available, standard and low profile APPLICATIONS Hearing Aids, Non-life support medical, Long life
KEMET Part Number: C276CC35250AA1J
KEMET Part Number: C276CC35250AA1J Film, Film/Foil Polypropylene, Motor Run, C276, 25 uf, 5%, 470 V D Threaded Mounting Stud M8 x 10 Double Fast-On L 2 13.5±0.5 5.5 6.3 x 0.8 13.4±0.5 10±0.5 General Information
Medium Power Film Capacitors
The FLA series uses metallized polypropylene dielectric, aluminum can, impregnated with soft PU specially treated to have a very high dielectric strength in operating conditions up to 85 C. The FLA has
Polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
MPPB Series. Metallized Polypropylene Film Capacitor Box type. Metallized Polypropylene Film Capacitor - Box type Features. Typical Applications
Metallized Polypropylene Film Capacitor - Box type Features Metallized polypropylene structure Low loss at high frequency Small inherent temperature rise Plastic case (UL94 V-0), Epoxy resin sealing RoHS
Type CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor
High CV, Screw Terminal Capacitors Specifcations Type CGS screw terminal, aluminum electrolytic capacitors have a high CV rating and are suitable for use in most demanding applications requiring high current
STANDARD CASE DIMENSIONS: millimeters (inches) W 1 dimension applies to the termination width for A dimensional area only.
L W FEATURES Non-burn safe technology Reliability level: 0.5%/1000 hours at 85ºC 13 case sizes available, standard and low profile Environmentally friendly, RoHS Compliant CV range: 2.2-1000μF / 1.8-10V
MTB. MKT box with radial terminals small size general purpose. Ed. 04 Rev Dissipation factor (DF), max. tgδ x10-4, measured at 25 ±5 C
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low pulse operation Dielectric Polyester Electrodes Vacuum
Rated DC Voltage 002 = 2.5Vdc 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 035 = 35Vdc 050 = 50Vdc
TPS surface mount products have inherently low ESR (equivalent series resistance) and are capable of higher ripple current handling, producing lower ripple voltages, less power and heat dissipation than
Type 4CMC 85 ºC, High Cap, Plug-in, Radial Leaded Aluminum Rugged Value, High-Capacitance 85 C Board-Mount Type
Type 4CMC is the PC-mount version of the high-capacitance Type DCMC screw-terminal capacitor and has about 50% more capacitance per can size through 250 V. It s for bus fltering applications where more
Energy sector DC LINK CAPACITORS AND SNUBBERS
Energy sector DC LINK CAPACITORS AND SNUBBERS DC link APPLICATIONS Hybrid vehicles Wind plants Solar power plants Electric energy generation from sea waves Medical equipment Industrial equipment Car electronics
Snubber, High Current DC, and Switching Capacitors
GTC 005 2011 Snubber, High Current DC, and Switching Capacitors Genteq Capacitors 1946 West Cook Road, Fort Wayne, Indiana 46818 USA Phone: (260) 416-5400 Fax: (260) 416-5460 Email: capacitors@regalbeloit.com
1.0 Rated Values and Operational Data
Applications Protection and Commutation Power Electronics Impulsional devices with intensive / High Current Switching Power Supplies Main Characteristics Dry film-foil technology Nominal Voltage: 630 VDC
Switching Power Supplies
, 18 150 Watt Features Compact boxed power supplies with screw terminal block Universal input 85-264 VAC, 50/60 Hz Short circuit and overvoltage protection High efficiency International safety approvals
APPLICATIONS Smart phone, Tablets, Notebook, LCD TV, Power supplies. P (0.081) 1.35 (0.050) 1.50 (0.059) max
FEATURES Conductive polymer electrode Benign failure mode under recommended use conditions Lower 3x reflow 260 C compatible CV range: 0.47-470μF / 2.5-125V 18 case sizes available APPLICATIONS Smart phone,
Aluminum Capacitors Power High Ripple Current Snap-In
Aluminum Capacitors 198 PHR-SI 057 PSM-SI smaller dimensions Fig. 1 Component outlines 198 PHR-SI QUICK REFERENCE DATA longer life higher ripple 157 PUM-SI DESCRIPTION VALUE Nominal case size (Ø D x L
Data Sheet. Aluminum electrolytic capacitors Alu-X product lines. Snap-in capacitors. Date: April 2008
Aluminum electrolytic capacitors Alu-X product lines Snap-in capacitors Series/Type: Data Sheet Date: April 2008 EPCOS AG 2008. Reproduction, publication and dissemination of this publication and the information
U37L SERIES Engineering Bulletin Mar 2013
EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 10,000 Hours Lifetime at 85 Up to 175,000 Hours Useful Life he series is a longer life version of the U37
W+0.2 (0.008) H+0.2 (0.008) L±0.2 (0.008) Tolerance K=±10% M=±20%
The TPS surface mount products have inherently low ESR (equivalent series resistance) and are capable of higher ripple current handling, producing lower ripple voltages, less power and heat dissipation
R82. p = 5mm. MKT Series R 8 2 C -
Loose All dimensions are in mm. Taped R82 Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. p = 5mm B