MIL-PRF Series. Military Conventional Wet Tantalum OUTLINE DIMENSIONS. CASE DIMENSIONS: millimeters (inches)
|
|
- James Lane
- 6 years ago
- Views:
Transcription
1 This data sheet contains the MIL-PRF ratings for which AVX is a qualified approved supplier. This will be continually updated as the qualification expands. For COTS-Plus equivalent ratings please refer to the TWC data sheet located on the website. This design is an axial leaded tubular case. It includes a welded tantalum can and header assembly that provides a hermetic seal to withstand harsh environments. The 1000 hour failure rates of 1%, 0.1% and 0.01% correspond to M, P, and R respectively. For details on testing conditions please refer to MIL-PRF OUTLINE DIMENSIONS Currently qualified M39006 ratings include T2-T4 case sizes: M Level P Level R Level Reliability Dashes Reliability Dashes Reliability Dashes M39006/22 6V-100V 6V-100V 6V-100V M39006/25 6V-100V 6V-100V 6V-100V M39006/30 6V-100V 6V-100V 6V-100V M39006/31 6V-100V 6V-100V 6V-100V E L E W F Terminal welded to case (T) D - + F 6.35 (0.250) W ( ) T (.094) Case CASE DIMENSIONS: millimeters (inches) DSCC AVX L D D E Case Case (0.031) Basic Case Insulated Case ±6.35 (0.250) Size Size (0.016) ±0.41 (0.016) Max T1 A (0.453) 4.78 (0.188) 5.56 (0.219) (1.500) T2 B (0.641) 7.14 (0.281) 7.92 (0.312) (2.250) T3 D (0.766) 9.52 (0.375) (0.406) (2.250) T4 E (1.062) 9.52 (0.375) (0.406) (2.250) VOLTAGE RATINGS (Operating Temperature -55ºC to 125ºC) Voltage (DC) Rated Voltage: (V r ) 85ºC Derated Voltage: (V c ) 125ºC Surge Voltage: (V s ) 85ºC
2 HOW TO ORDER MILITARY M39006 PART NUMBER: M39006 / Not RoHS Compliant Type / Military Designator Specification Sheet Number Dash Number *H = High Vibration (When Specified) *High vibration qualified parts are currently under development. Please contact the factory for additional details and availability. 1/ 2/ 3/ RIPPLE CURRENT MULTIPLIERS vs. Frequency, temperature and applied voltage Frequency of Applied 120Hz 800Hz 1kHz Ripple Current Ambient Still Air Temperature (ºC) % of 100% ºC 90% _ Rated 80% Peak 70% Voltage 66-2/3% Frequency of Applied 10kHz 40kHz 100kHz Ripple Current Ambient Still Air Temperature (ºC) % of 100% ºC 90% _ Rated 80% Peak 70% Voltage 66-2/3% / At 125ºC the rated voltage of the capacitors decreases to 66 2/3 of the 85ºC rated voltage. 2/ The peak of the applied ac ripple voltage plus the applied dc voltage must not exceed the dc voltage rating of the capacitors. 3/ The ripple current listed in the parametric tables represents a rating calculated by using a maximum internal temperature rise (ΔT) at 50 C at 40 khz at 85 C ambient temperature, with a maximum peak rated voltage of percent of the 85 C peak voltage rating. 104
3 M39006 /22 RATINGS AND DASH NUMBER REFERENCE M39006/22 Dashes Cap DC Rated DC Leakage (μa) ESR Impedance Maximum Capacitance AC Ripple T T T T T T T T T T T T T T T T T T T T T T T T
4 M39006/22 Dashes Cap DC Rated DC Leakage (μa) ESR Impedance Maximum Capacitance AC Ripple T T T T T T T T T T T T T T T T T T T T T T T T T T4 106
5 M39006/25 RATINGS AND DASH NUMBER REFERENCE M39006/25 Dashes Cap DC Rated DC Leakage (μa) ESR Impedance Maximum Capacitance AC Ripple T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T4 107
6 M39006 /30 RATINGS AND DASH NUMBER REFERENCE M39006/30 Dashes Cap DC Rated DC Leakage (μa) ESR Impedance Maximum Capacitance AC Ripple T T T T T T T T T T T T T T T T T T T T T T T T
7 M39006/30 Dashes Cap DC Rated DC Leakage (μa) ESR Impedance Maximum Capacitance AC Ripple T T T T T T T T T T T T T T T T T T T T T T T T T T4 109
8 M39006 /31 RATINGS AND DASH NUMBER REFERENCE M39006/31 Dashes Cap DC Rated DC Leakage (μa) ESR Impedance Maximum Capacitance AC Ripple T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T4 110
Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type
Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long
More informationCase. Without Insulating With Insulatiing E Size Size (0.016)
The TWA series is an axial leaded wet electrolytic tantalum capacitor with a unique cathode system that promotes very high CV (Capacitance/Voltage) per cc in traditional MIL-PRF-39006 case sizes. The series
More informationWet Tantalum Tubular Capacitors
Castanet Tantalum Capacitors Wet Tantalum Tubular Capacitors CECC & ESA Axial & Surface Mount MIL-PRF-39006C Axial DSCC Drawing 93026 Axial High Temperature 200 C Axial & Surface Mount 150 Volt Rated Axial
More informationType AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
More informationType AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
More information16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:
T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working
More informationPERFORMANCE SPECIFICATION SHEET
INCHPOUND MILPRF39006/31D 21 March 2018 SUPERSEDING MILPRF39006/31C 21 April 2011 PERFORMANCE SPECIFICATION SHEET CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED SLUG),
More informationFor capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k
T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal
More information55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A
Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:
More information(CWR11 Style) Overview. Tantalum Surface Mount Capacitors High Reliability T493 Commercial Off-The-Shelf (COTS) MnO 2
T493 Commercial Off-The-Shelf (COTS) MnO 2 Overview The KEMET T493 is designed for the commercial offthe-shelf (COTS) requirements of military and aerospace applications. The T493 is a surface mount product,
More informationTMJ Tantalum SMD S1gma TM Series Capacitors
The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely
More informationOBSOLETE. General Specifications. Key Features. Applications. Outline Dimensions CLR 79 (MIL-C-39006/22) CLR 81 (MIL-C-39006/25)
General Specifications Operating : Working Voltage: Key Features Applications -55 C to +125 C, with voltage derating above 85 C, ( voltage at 125ºC is 2/3 of the value at 85ºC) 6 to 125 WVdc Tolerance:
More informationCASE DIMENSIONS: millimeters (inches)
L A S A W 1 MARKING A, B, C, D, E, U CASE Polarity Band (Anode+) AVX LOGO 227 A XXXXX H W Value in pf 227 = 220μF Rated Voltage A = 10V ID CASE DIMENSIONS: millimeters (inches) The TBJ COTS-Plus SRC9000
More informationProduct Specification
1.0 SCOPE This document contains specific electrical, mechanical, and environmental requirements and specifications for double- sealed, axial- leaded hybrid capacitors. 2.0 CONSTRUCTION 2.1 General The
More informationRated DC Voltage 002 = 2.5Vdc 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 035 = 35Vdc 050 = 50Vdc
TPS surface mount products have inherently low ESR (equivalent series resistance) and are capable of higher ripple current handling, producing lower ripple voltages, less power and heat dissipation than
More informationType 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size
Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching
More informationWet Tantalum Capacitors, Military Established Reliability, MIL-PRF Qualified Styles CLR65, 69, 79, 81, 90, 91
Wet Tantalum Capacitors, ilitary Established eliability, IL-F-39006 Qualified Styles CL65, 69, 79, 81, 90, 91 FEUES Hermetically sealed etal cased Axial lead Tubular SECIFICIONS Style CL65, 39006/09 Style
More informationWet Tantalum Capacitors, Military Established Reliability, MIL-PRF Qualified Styles CLR65, 69, 79, 81, 90, 91
39006/09/21/22/25/30/31 Wet Tantalum Capacitors, ilitary Established eliability, FEATUES Hermetically sealed etal cased Axial lead Tubular SECIFICATIONS Style CL65, 39006/09 Style CL69, 39006/21 Style
More informationSWITCH-MODE CERAMIC CAPACITORS
Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and
More informationType 381EL 105 ºC Ultra-Long Life Snap-In, Aluminum More than 100,000 Hours Operation at 65 C and Rated 105 C Ripple OBSOLETE
Specifications Temperature Range Rated Voltage Range 160 to 450 Vdc Capacitance Range 39 µf to 2,200 µf ± 20% Capacitance Tolerance ± 20% Leakage Current Ripple Current Multipliers The new 381EL extends
More informationType 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size
Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching
More informationPerformance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550
Standard capacitors Applications Frequency converters Uninterruptible power supplies All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Specifications
More informationSTANDARD CASE DIMENSIONS: millimeters (inches) W 1 dimension applies to the termination width for A dimensional area only.
L W FEATURES Non-burn safe technology Reliability level: 0.5%/1000 hours at 85ºC 13 case sizes available, standard and low profile Environmentally friendly, RoHS Compliant CV range: 2.2-1000μF / 1.8-10V
More informationFEATURES APPLICATIONS. High power DC/DC general applications MULTIANODE CONSTRUCTION
Tantalum Ultra Low Capacitor FEATURES Multi-anode construction Super low CV range: 10-2200μF / 2.5-50V 5 case sizes available Mirror multi-anode construction used with D, Y case capacitors reduces ESL
More informationSMM SERIES Engineering Bulletin Mar 07
Series SERIES Snap Mount Downsize High Long Life RoHS Compliant 85 C Maximum Temperature The series is a high voltage, long life snap-in capacitor series that offers downsized versions of the SMH series.
More informationRoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved capacitance retention at high frequencies.
More informationType 381LX / 383LX 105 C High Ripple, Snap-In Aluminum High Ripple, Long Life, 2, 4 and 5 pin styles available
High Ripple, Long Life, 2, 4 and 5 pin styles available Specifications Temperature Range Rated Voltage Range Adding longer-life and more ripple capability to the excellent value of Type 380L/LX capacitors,
More informationType 380LX / 382LX 85 C High Capacitance, Snap-In Aluminum
The excellent value of Type 380L/LX capacitors finds application in switching power supply input and output circuits and even motor drives where the high surface area of multiple units in parallel approaches
More informationLarge Can Aluminum Electrolytic Capacitors
FEATURES LONG LIFE AT +105 C (2,000 ~ 3,000 HOURS) HIGH RIPPLE CURRENT HIGH VOLTAGE (UP TO 500VDC) SUITABLE FOR SWITCHING POWER SUPPLIES SPECIFICATIONS *See System for Details Operating Temperature Range
More informationLong life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options
TS-HC Series 105 C, 2000 hours Long life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options RoHS Compliant Rated
More informationAPPLICATIONS Smart phone, Tablets, Notebook, LCD TV, Power supplies. P (0.081) 1.35 (0.050) 1.50 (0.059) max
FEATURES Conductive polymer electrode Benign failure mode under recommended use conditions Lower 3x reflow 260 C compatible CV range: 0.47-470μF / 2.5-125V 18 case sizes available APPLICATIONS Smart phone,
More informationHighest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES
CASE DIMENSIONS: millimeters (inches) Code H, K, L, O, S, T, X CASE 156 J XXXXX 156 = 15µF ID Code HO TO ORDER TCN L 157 FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode
More informationRated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V
FEATURES Improved reliability 2x standard DCL reduced by 25% to 0.0075 CV Robust against higher thermo-mechanical stresses during assembly process CV range: 0.10-680μF / 4-50V 6 case sizes available 130
More informationProduct Specification
Product Specification NUMBER TDD SERIES HYBRID CAPACITOR ISSUE 01 REVISION I ECO 15-051 DATE 10/2/2015 1.0 Scope This document contains specific electrical, mechanical, and environmental requirements and
More informationAVX High Reliability Tantalum Capacitors
AVX High Reliability Tantalum Capacitors www.avx.com Version 18.1 Contents Introduction................................................................................................... 2 High Reliability
More informationAluminum Capacitors Power High Ripple Current Screw Terminals
101/102 PHR-ST Aluminum Capacitors FEATURES ST STB Fig.1 Component outline Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated with a blue
More informationAluminum Capacitors Power High Ripple Current Snap-In
Aluminum Capacitors 198 PHR-SI 057 PSM-SI smaller dimensions Fig. 1 Component outlines 198 PHR-SI QUICK REFERENCE DATA longer life higher ripple 157 PUM-SI DESCRIPTION VALUE Nominal case size (Ø D x L
More informationESC Aluminum Electrolytic Capacitors
H Description S Capacitors for high frequency applications. H Applications S Computers switching regulator mother board output. H Features S Case with D 6.0 mm has the safety vent at the bottom. H Diagram
More informationFEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications
Low - Automotive Product Range FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.22-680μF / 6.3-50V 5 case sizes available Power supply applications APPLICATIONS Power Supply
More informationFEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder
More informationSnap-in Type Aluminium Electrolytic Capacitors
Endurance: 85 2000hours Recommended Applications : Applying to switching power supply and other industry/ commercial field Corresponding product to RoHS SPECIFICATIONS Item Category Temperature Range -40~+85
More informationHighest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES
FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode Benign failure mode under recommended use conditions Lower Undertab terminations layout: - High Volumetric Efficiency
More informationStandard and Low Profile Tantalum Microchip Capacitors. STANDARD CASE DIMENSIONS: millimeters (inches)
FEATURES The world s smallest surface mount tantalum capacitor CV range: 0.10-150μF / 2-25V 11 case sizes available, standard and low profile APPLICATIONS Hearing Aids, Non-life support medical, Long life
More informationWet Tantalum Capacitors Sintered Anode TANTALEX Capacitors for Operation to +125 C, Elastomer-Sealed
Wet Tantalum Capacitors Sintered Anode TANTALEX Capacitors for Operation to, Elastomer-Sealed FEATURES Axial through-hole terminations: standard tin / lead (SnPb), 100 % tin (RoHS-compliant) available
More informationRated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V
FEATURES Improved reliability 2x standard reduced by 25% to 0.0075 CV Robust against higher thermo-mechanical stresses during assembly process CV range: 0.10-680μF / 4-50V 6 case sizes available 130 low
More informationW+0.2 (0.008) H+0.2 (0.008) L±0.2 (0.008) Tolerance K=±10% M=±20%
The TPS surface mount products have inherently low ESR (equivalent series resistance) and are capable of higher ripple current handling, producing lower ripple voltages, less power and heat dissipation
More informationLARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS. (at 20 after 5 minutes) Dissipation Factor (tanδ) 420 & 450V 0.20
from KMQ series Endurance with ripple : 2,000 to 3,000 hours at 105 Non solvent resistant type RoHS Compliant LXS P246 KMS P225 Downsized LXQ P249 KMM KMQ P215 SPECIFICATIONS Items Category Temperature
More informationSummary of Specifications
Series Snap Mount Large High CV High Ripple RoHS Compliant 85 C Maximum Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life
More informationKEMET Organic Capacitor (KO-CAP ) High Reliability T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 63 VDC Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable
More informationFEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder
More informationTantalum Chip Capacitors
FEATURES EXPANDED VALUE RANGE & REDUCED CASE SIZES MOLDED CONSTRUCTION FOR HIGH SOLDERING HEAT RESISTANCE ELEVEN CASE SIZES (J, P, A2, A, B2, B, C2, C, V, D AND E) BOTH FLOW AND REFLOW SOLDERING APPLICABLE
More informationType EDL Electric Double Layer Supercapacitors
Ultra High Capacitance, Small Case Size Options Type EDL electric double layer supercapacitors offer extremely high capacitance values (farads) in a variety of packaging options that will satisfy, low
More informationAluminum Capacitors Power Ultra Long Life Snap-In
059 PLL-SI QUICK REFERENCE DATA DESCRIPTION Nominal case size (Ø D x L in mm) Fig.1 Component outlines 159 miniaturized 85 C PUL-SI VALUE 22 x 25 to 35 x 60 157 PUM-SI Rated capacitance range (E6/E12 series),
More informationFEATURES APPLICATIONS. Audio Systems GPS Seat Controls Dashboard
FEATURES General purpose SMT chip tantalum series 6 case sizes available CV range: 0.22-680μF / 6.3-50V APPLICATIONS Audio Systems GPS Seat Controls Dashboard LEAD-FREE COMPATI- BLE COMPONENT MARKING A,
More informationThank you for visiting our new Consumer/Gaming Capacitance Solution page.
Thank you for visiting our new Consumer/Gaming Capacitance Solution page. This site is currently under construction - in the interim you will find the following KEMET product data sheets that may be of
More informationtan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0
Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant
More informationFeatures. Isolation PFM. Block Diagram
Features SMT Technology 2:1 Input Range Efficiency up to 85 I/O Isolation 00 Remote on/off Control Short Circuit Protection MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
More informationSOLID TANTALUM CHIP CAPACITORS T495 SERIES Low ESR, Surge Robust
CATHODE (-) END VIEW W SOLID TANTALUM CHIP CAPACITORS Designed for very low ESR High ripple current capability High surge current capability 100% accelerated steady-state aging 100% Surge Current test
More informationOverview. Benefits. One world. One KEMET
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 63 VDC Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable
More informationConductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on
More informationContents CORNELL DUBILIER
Contents Products Listed by Type Designation........................................................ Chip and SMT Selector Guide................................................................... 1.001
More informationFEATURES Compliant to the RoHS2 directive 2011/65/EU SMD J-lead Low profile case sizes
FEATURES Compliant to the RoHS2 directive 2011/65/EU SMD J-lead Low profile case sizes APPLICATIONS Handheld electronics USB accessories LEAD-FREE COMPATI- BLE COMPONENT CASE DIMENSIONS: millimeters (inches)
More informationType 4CMC 85 ºC, High Cap, Plug-in, Radial Leaded Aluminum Rugged Value, High-Capacitance 85 C Board-Mount Type
Type 4CMC is the PC-mount version of the high-capacitance Type DCMC screw-terminal capacitor and has about 50% more capacitance per can size through 250 V. It s for bus fltering applications where more
More informationSELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Reflected ripple current. Case Temperature rise above ambient ABSOLUTE MAXIMUM RATINGS
MEE3 Series SELECTION GUIDE FEATURES UL 695 recognized RoHS compliant Typical efficiency from 83% Power density 2.68W/cm 3 Wide temperature performance at full 3 Watt load, 4 C to 85 C 3 UL 94V- package
More informationSolid-Electrolyte TANTALEX Capacitors, Military MIL-PRF-39003/09 Qualified, Style CSR21
Solid-Electrolyte TANTALEX Capacitors, ilitary IL-PRF-39003/09 Qualified, Style CSR21 FEATURES Hermetically sealed etal cased Axial lead Weibull failure rates B, C, Exponential failure rates, P, R, S Low
More informationDATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents
DATA SHEET Supersedes data of 18th January 2000 File under BCcomponents, BC01 2000 Apr 07 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case,
More informationOxiCap NOS Low ESR Series
OxiCap NOS Low Series A, B, C, D, E, V, W, X, Y CASE Polarity Band (Anode+) L A S A W 1 MARKING OxiCap LOGO 227 G XXXXX H Capacitance Value in pf 227 = 220µF Rated Voltage G = 4V ID Code W CASE DIMENSIONS:
More information150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
More informationSeries. Applications Typical applications include decoupling and filtering in military and aerospace applications.
High Reliability COTS (CWR11 Style) T493 Military/Aerospace COTS MnO 2 Overview The KEMET T493 is designed for the COTS (Commercial Off-The-Shelf) requirements of military and aerospace applications. This
More informationThank you for visiting our new Transportation Capacitance Solution page.
Thank you for visiting our new Transportation Capacitance Solution page. This site is currently under construction - in the interim you will find the following KEMET product data sheets that may be of
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More informationFEATURES APPLICATIONS. Audio Systems GPS Seat Controls Dashboard
FEATURES General purpose SMT chip tantalum series 6 case sizes available CV range: 0.22-680μF / 6.3-50V APPLICATIONS Audio Systems GPS Seat Controls Dashboard LEAD-FREE COMPATIBLE COMPONENT MARKING A,
More informationCapXon LD Series LD Series H Features Updated Series Preliminary Data Sheet Standard capacitors
Updated Series Preliminary Data Sheet 85 5000H Features Standard capacitors Applications Switch-mode power supplies in industrial and entertainmentelectronics Uninterruptible power supplies Features High
More informationNXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
More informationSELECTION GUIDE - SINGLE OUTPUT 1. Nominal Input Voltage Output Voltage
www.murata-ps.com SELECTION GUIDE - SINGLE OUTPUT 1 Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise
More informationK05 TYPE -40 C +105 C 5000H
K05 TYPE -40 C +105 C 5000H Surge-proof capacitor in aluminium can with insulation sleeve Safety vent at bottom case or aside case. Snap in terminals for PCB mounting. Very high CV for unit volume with
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationT95 D 107 K 010 E A A S TYPE CASE CODE DC VOLTAGE RATING AT + 85 C TERMINATION AND PACKAGING
T95 Solid Tantalum Chip Capacitors, FEATURES High reliability; Weibull grading available Surge current testing per MIL-PRF-55365 options available Standard and low ESR options Terminations: SnPb, standard.
More informationNXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationSnap-in Type Aluminium Electrolytic Capacitors
Endurance:105 3000 hours Recommended Applications : Smoothing circuit, TV/Monitor,Adapter, SMPS Corresponding product to RoHS Long Life LG SPECIFICATIONS Item Category Temperature Range Range Rated acitance
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
More information2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
More informationPolyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
More informationFeatures. Figure 1. Block Diagram. Figure 2. Input - Output DC Voltage
Features CBAM PQ-28 The Power Quality Module (PQ-28) is a single input power conditioning module 1/2 brick package (2.28 x 2.4 x 0.50 ) Designed for 200 Watts Designed to interface with MIL-STD-1275B,
More informationFEATURES APPLICATIONS. Mobile phones MP3/4 players. R (0.081) 1.30 (0.051) 1.20 (0.047) max. Tolerance M = ±20%
FEATURES High Volumetric Efficiency 3x reflow 260 C compatible 14 case sizes available including low profile codes Environmentally friendly Consumer applications (e.g. mobiles phones, PDA etc.) CV range:
More informationMEJ2 Series 5.2kVDC Isolated 2W DC/DC Converters
www.murata-ps.com MEJ2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
More informationSolid Tantalum Chip Capacitors TANTAMOUNT, Commercial, Surface Mount
Solid Tantalum Chip Capacitors PERFORMANCE/ELECTRICAL CHARACTERISTICS Operating Temperature: - 55 C to + 85 C (To + 125 C with voltage derating) Note: Refer to Doc. 40088 Capacitance Range: 0.10 µf to
More informationMEJ2 Series 5.2kVDC Isolated 2W DC/DC Converters
www.murata-ps.com MEJ2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
More informationTechnical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF
www.niccomp.com/pcn Technical Support: tpmg@niccomp.com October 28 th 2016 SUB: EOL End of Life Notification Products impacted by this notice: NPC Series SMT Solid Polymer Aluminum Electrolytic Capacitors
More informationPart Number Example (example) CDR31 BP 101 B K S M. MIL Style Voltage-temperature Limits
Part Number Example CDR31 thru CDR35 MILITARY DESIGNATION PER MIL-PRF-55681 W D L t Part Number Example (example) CDR31 BP 101 B K S M MIL Style Voltage-temperature Limits T Capacitance Rated Voltage Termination
More informationCONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice. 1. Features Ultra Low & high ripple
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
More informationKMG Series. Miniature General Purpose Solvent Proof 105 C Maximum Temperature
Miniature General Purpose Solvent Proof 5 C Temperature The series capacitors are designed for general purpose use with an operating temperature range for most of these capacitors from 55 C to 5 C. The
More informationGeneral purpose SMT chip tantalum series 5 case sizes available CV range: μF / V
FEATURES General purpose SMT chip tantalum series 5 case sizes available CV range: 0.22-680μF / 6.3-50V LEAD-FREE COMPATIBLE COMPONENT MARKING A, B, C, D, E CASE Polarity Band (Anode+) AVX LOGO 227 A XXXXX
More informationLow ESR and High Frequency Radial Electrolytic Capacitor. TZE Series. Features. Applications. Dimensions (in mm)
Low ESR and High Frequency Radial Electrolytic Capacitor Low ESR and High Frequency Radial Electrolytic Capacitor Features Radial leads, cylindrical aluminum case Low impedance and high frequency High
More informationType CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor
High CV, Screw Terminal Capacitors Specifcations Type CGS screw terminal, aluminum electrolytic capacitors have a high CV rating and are suitable for use in most demanding applications requiring high current
More informationLPH Large Capacitance Aluminum Electrolytic Capacitors
Series LPH 105 C, Miniaturized, High-Reliability, High-Ripple Capacitors ULTRAMINI, HIGH RELIABLILITY TYPE Smaller-sized and higher-ripple than L3J. Guaranteed for 2000 hours at 105 C. Outline Drawing
More informationRoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved capacitance retention at high frequencies.
More informationFEATURES APPLICATIONS. Mobile phones MP3/4 players. R (0.081) 1.30 (0.051) 1.20 (0.047) max. Tolerance M = ±20%
FEATURES High Volumetric Efficiency 3x reflow 260 C compatible 14 case sizes available including low profile codes Environmentally friendly Consumer applications (e.g. mobiles phones, PDA etc.) CV range:
More informationNXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
More information