Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES

Size: px
Start display at page:

Download "Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES"

Transcription

1 CASE DIMENSIONS: millimeters (inches) Code H, K, L, O, S, T, X CASE 156 J XXXXX 156 = 15µF ID Code HO TO ORDER TCN L 157 FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode Benign failure mode under recommended use conditions Lower Undertab terminations layout: - High Volumetric Efficiency - High PCB assembly density - High capacitance in smaller dimensions 3x reflow 260 C compatible 11 case sizes available APPLICATIONS Consumer applications (e.g. mobiles, MP3 etc.) Bulk decoupling of SoC (System on chip) EIA EIA L± (0.008) H max. P ±0.10 N ±0.10 A P ±0.10 A N ±0.10 Code Metric (0.008) (0.004) (0.004) (0.004) (0.004) (0.004) M, N CASE J 106 = 10µF Code M 006 H P AP S R L AN LEAD-FREE COMPATIBLE COMPONENT M (0.081) 1.30 (0.051) 0.90 (0.035) 1.00 (0.039) 1.00 (0.039) 0.85 (0.033) 0.85 (0.033) 0.40 (0.016) N (0.081) 1.30 (0.051) 1.00 (0.039) 1.00 (0.039) 1.00 (0.039) 0.85 (0.033) 0.85 (0.033) 0.40 (0.016) O (0.126) 1.60 (0.063) 0.60 (0.024) 1.30 (0.051) 1.30 (0.051) 1.15 (0.045) 1.15 (0.045) 0.90 (0.035) K (0.126) 1.60 (0.063) 1.00 (0.039) 1.30 (0.051) 1.30 (0.051) 1.15 (0.045) 1.15 (0.045) 0.90 (0.035) S (0.126) 1.60 (0.063) 1.20 (0.047) 1.30 (0.051) 1.30 (0.051) 1.15 (0.045) 1.15 (0.045) 0.90 (0.035) L (0.138) 2.80 (0.110) 1.00 (0.039) 2.50 (0.098) 2.10 (0.083) 1.15 (0.045) 1.35 (0.053) 1.00 (0.039) T (0.138) 2.80 (0.110) 1.20 (0.047) 2.50 (0.098) 2.10 (0.083) 1.15 (0.045) 1.35 (0.053) 1.00 (0.039) H (0.138) 2.80 (0.110) 1.50 (0.059) 2.50 (0.098) 2.10 (0.083) 1.15 (0.045) 1.35 (0.053) 1.00 (0.039) X (0.287) 4.30 (0.169) 1.50 (0.059) 3.25 (0.128) 3.25 (0.128) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083) (0.287) 6.10 (0.240) 1.50 (0.059) 4.75 (0.187) 4.75 (0.187) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083) (0.287) 6.10 (0.240) 2.00 (0.079) 4.75 (0.187) 4.75 (0.187) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083) MARKING 3, 4 CASE 158 J XXXXX 158 = 1500µF ID Code N S Min Type Case Size See table above Capacitance Code pf code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) TECHNICAL SPECIFICATIONS Tolerance M = ±20% Rated DC 006 = 6.3Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 035 = 35Vdc 050 = 50Vdc Packaging R = Pure Tin 7" Reel S = Pure Tin 13" Reel in mω Technical Data: All technical data relate to an ambient temperature of +25 C Capacitance Range: 1.0 μf to 1500 μf Capacitance Tolerance: ±20% Leakage Current : 0.1CV (V R ) +85ºC: Category (V C ) +105ºC: Surge (V S ) +85ºC: Surge (V S ) +105ºC: Range: -55 C to +105 C Reliability: 1% per 1000 hours at 85 C, V R with 0.1Ω/V series impedance confidence level NOTE: Conductive Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in. These changes may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum temperature with associated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the AVX Conductive Capacitor Guidelines for more information or contact factory for application assistance

2 CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance DC to 85 C / 0.66DC to 105 C μf Code 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T) N(1500) N(500) L(300)/T(200) O(500) O(500) O(500) K(350)/S(350) T(200) O(500) O(500) O(500) O(500) T(200) L(200)/T(200) T(250) M(500) L(250)/T(150,200) X(100) X(100,150) K(200,250) 3(70)/4(100) 3(200)/4(100) L(200)/S(250) L(200) S(250)/T(200) X(100) 4(70) H(170) T(200) 4(70) 4(100) 4(100) (70) 4(100) X(50) 4(100) X(200)/3(100) 4(55) (55) Released ratings, ( ratings in mohms in parentheses) Engineering samples - please contact AVX Note: ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE Maximum AVX Case Cap Rated Operating Max. 100kHz RMS Current (ma) Product Part No. Size (μf) Max. 100kHz Category (V) (ºC) (μa) (%) (mω) 45ºC 85ºC 105ºC MSL 4 85 C TCNO226M004#0500 O C TCNO156M006#0500 O TCNO226M006#0500 O TCNM476M006#0500 M TCNK107M006#0200 K TCNK107M006#0250 K TCNL107M006#0200 L TCNS107M006#0250 S TCNL157M006#0200 L TCNS157M006#0250 S TCNT157M006#0200 T TCNH227M006#0170 H TCNT227M006#0200 T TCNX477M006#0050 X TCNX108M006#0200 X TCN3108M006# TCN4108M006# TCN4158M006# C TCNO106M010#0500 O TCNO156M010#0500 O C TCNO685M016#0500 O TCNO106M016#0500 O TCNL336M016#0200 L TCNT336M016#0200 T

3 RATINGS & PART NUMBER REFERENCE Maximum AVX Case Cap Rated Operating Max. 100kHz RMS Current (ma) Product Part No. Size (μf) Max. 100kHz Category (V) (ºC) (μa) (%) (mω) 45ºC 85ºC 105ºC MSL TCNL476M016#0250 L TCNT476M016#0150 T TCNT476M016#0200 T TCNX157M016#0100 X TCN4227M016# TCN4337M016# TCN4477M016# C TCN4227M020# TCN4337M020# C TCNN475M025#0500 N TCNK106M025#0350 K TCNS106M025#0350 S TCNT226M025#0200 T TCNT336M025#0250 T TCNX476M025#0100 X TCN3107M025# TCN4107M025# TCN4157M025# TCN4227M025# C TCNL475M035#0300 L TCNT475M035#0200 T TCNT106M035#0200 T TCNX476M035#0100 X TCNX476M035#0150 X TCN3107M035# TCN4107M035# C TCNN105M050#1500 N Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25ºC. Capacitance and are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. is measured at rated voltage after 5 minutes. allowed to move up to 1.25 times catalog limit post mounting. For typical weight and composition see page 273. NOTE: AVX reserves the right to supply higher voltage ratings in the same case size to the same reliability standards. RECOMMENDED DERATING FACTOR and temperature derating as percentage of Vr Product Category 2 Product Category 3 Product Category 5 for Vr 10V for Vr 16V for Vr 10V for Vr 16V 72% for Vr 10V for Vr 16V 64% -55ºC 85ºC 105ºC -55ºC 85ºC 105ºC -55ºC 85ºC

4 PRODUCT CATEGORY 2, 3 (TEMPERATURE RANGE -55 C TO +105 C) TEST Condition Characteristics Apply rated voltage (Ur) at 85ºC for 2000 hours through a circuit impedance of 0.1Ω/V (all CATEGORIES). And / or apply rated voltage (Ur) Endurance (CATEGORY 2) or 0.8x rated voltage (CATEGORY 3) at 105 C for 2000 hours through a circuit impedance of 0.1Ω/V. Always stabilize at room temperature for 1-2 hours before (V R 75V) Storage Life Store at 105ºC, no voltage applied, for 2000 hours. (V R > 75V) Stabilize at room temperature for 1-2 hours before Humidity Store at 65ºC and relative humidity for x hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before within +30/-20% of initial value Stability Surge Mechanical Shock Vibration Step C Duration(min) Apply 1.3x rated voltage (Ur) at 105ºC for CATEGORY 2, or apply 1.3x 0.8x rated voltage (Ur) at 105ºC for CATE- GORY 3 for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000Ω MIL-STD-202, Method 213, Condition C MIL-STD-202, Method 204, Condition D +20ºC -55ºC +20ºC +85ºC +105ºC +20ºC IL* n/a IL* 10 x IL* 12.5 x IL* IL* n/a +0/-20% ±5% +20/-0% +30/-0% ±5% IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL* within +10/-20% of initial value for Vr 10V within +20/-30% of initial value for Vr 16V *Initial Limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85 C for 24 hours

5 PRODUCT CATEGORY 5 (TEMPERATURE RANGE -55 C TO +85 C) TEST Condition Characteristics Apply rated voltage (Ur) at 85ºC for 2000 hours Endurance through a circuit impedance of 0.1Ω/V. Stabilize at room temperature for 1-2 hours before Store at 85ºC, no voltage applied, for 2000 hours. Storage Life Stabilize at room temperature for 1-2 hours before Humidity Store at 65ºC and relative humidity for x hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before within +40/-20% of initial value Step C Duration(min) Stability Surge Mechanical Shock Vibration Apply 1.3x rated voltage (Ur) at 85ºC for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000Ω MIL-STD-202, Method 213, Condition C MIL-STD-202, Method 204, Condition D +20ºC -55ºC +20ºC +85ºC +20ºC IL* n/a IL* 10 x IL* IL* n/a +0/-20% ±5% +20/-0% ±5% IL* 1.5 x IL* IL* 1.5 x IL* IL* within +10/-20% of initial value for Vr 10V within +20/-30% of initial value for Vr 16V *Initial Limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85 C for 24 hours

Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES

Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode Benign failure mode under recommended use conditions Lower Undertab terminations layout: - High Volumetric Efficiency

More information

APPLICATIONS Smart phone, Tablets, Notebook, LCD TV, Power supplies. P (0.081) 1.35 (0.050) 1.50 (0.059) max

APPLICATIONS Smart phone, Tablets, Notebook, LCD TV, Power supplies. P (0.081) 1.35 (0.050) 1.50 (0.059) max FEATURES Conductive polymer electrode Benign failure mode under recommended use conditions Lower 3x reflow 260 C compatible CV range: 0.47-470μF / 2.5-125V 18 case sizes available APPLICATIONS Smart phone,

More information

FEATURES APPLICATIONS. Mobile phones MP3/4 players. R (0.081) 1.30 (0.051) 1.20 (0.047) max. Tolerance M = ±20%

FEATURES APPLICATIONS. Mobile phones MP3/4 players. R (0.081) 1.30 (0.051) 1.20 (0.047) max. Tolerance M = ±20% FEATURES High Volumetric Efficiency 3x reflow 260 C compatible 14 case sizes available including low profile codes Environmentally friendly Consumer applications (e.g. mobiles phones, PDA etc.) CV range:

More information

FEATURES APPLICATIONS. Mobile phones MP3/4 players. R (0.081) 1.30 (0.051) 1.20 (0.047) max. Tolerance M = ±20%

FEATURES APPLICATIONS. Mobile phones MP3/4 players. R (0.081) 1.30 (0.051) 1.20 (0.047) max. Tolerance M = ±20% FEATURES High Volumetric Efficiency 3x reflow 260 C compatible 14 case sizes available including low profile codes Environmentally friendly Consumer applications (e.g. mobiles phones, PDA etc.) CV range:

More information

FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications

FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications Low - Automotive Product Range FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.22-680μF / 6.3-50V 5 case sizes available Power supply applications APPLICATIONS Power Supply

More information

STANDARD CASE DIMENSIONS: millimeters (inches) W 1 dimension applies to the termination width for A dimensional area only.

STANDARD CASE DIMENSIONS: millimeters (inches) W 1 dimension applies to the termination width for A dimensional area only. L W FEATURES Non-burn safe technology Reliability level: 0.5%/1000 hours at 85ºC 13 case sizes available, standard and low profile Environmentally friendly, RoHS Compliant CV range: 2.2-1000μF / 1.8-10V

More information

TMJ Tantalum SMD S1gma TM Series Capacitors

TMJ Tantalum SMD S1gma TM Series Capacitors The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely

More information

FEATURES APPLICATIONS. High power DC/DC general applications MULTIANODE CONSTRUCTION

FEATURES APPLICATIONS. High power DC/DC general applications MULTIANODE CONSTRUCTION Tantalum Ultra Low Capacitor FEATURES Multi-anode construction Super low CV range: 10-2200μF / 2.5-50V 5 case sizes available Mirror multi-anode construction used with D, Y case capacitors reduces ESL

More information

OxiCap NOS Low ESR Series

OxiCap NOS Low ESR Series OxiCap NOS Low Series A, B, C, D, E, V, W, X, Y CASE Polarity Band (Anode+) L A S A W 1 MARKING OxiCap LOGO 227 G XXXXX H Capacitance Value in pf 227 = 220µF Rated Voltage G = 4V ID Code W CASE DIMENSIONS:

More information

Standard and Low Profile Tantalum Microchip Capacitors. STANDARD CASE DIMENSIONS: millimeters (inches)

Standard and Low Profile Tantalum Microchip Capacitors. STANDARD CASE DIMENSIONS: millimeters (inches) FEATURES The world s smallest surface mount tantalum capacitor CV range: 0.10-150μF / 2-25V 11 case sizes available, standard and low profile APPLICATIONS Hearing Aids, Non-life support medical, Long life

More information

FEATURES APPLICATIONS. Audio Systems GPS Seat Controls Dashboard

FEATURES APPLICATIONS. Audio Systems GPS Seat Controls Dashboard FEATURES General purpose SMT chip tantalum series 6 case sizes available CV range: 0.22-680μF / 6.3-50V APPLICATIONS Audio Systems GPS Seat Controls Dashboard LEAD-FREE COMPATIBLE COMPONENT MARKING A,

More information

General purpose SMT chip tantalum series 5 case sizes available CV range: μF / V

General purpose SMT chip tantalum series 5 case sizes available CV range: μF / V FEATURES General purpose SMT chip tantalum series 5 case sizes available CV range: 0.22-680μF / 6.3-50V LEAD-FREE COMPATIBLE COMPONENT MARKING A, B, C, D, E CASE Polarity Band (Anode+) AVX LOGO 227 A XXXXX

More information

FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications

FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications Low - Automotive Product Range FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.22-680μF / 6.3-50V 5 case sizes available Power supply applications APPLICATIONS Power Supply

More information

Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V

Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V FEATURES Improved reliability 2x standard DCL reduced by 25% to 0.0075 CV Robust against higher thermo-mechanical stresses during assembly process CV range: 0.10-680μF / 4-50V 6 case sizes available 130

More information

FEATURES APPLICATIONS. Audio Systems GPS Seat Controls Dashboard

FEATURES APPLICATIONS. Audio Systems GPS Seat Controls Dashboard FEATURES General purpose SMT chip tantalum series 6 case sizes available CV range: 0.22-680μF / 6.3-50V APPLICATIONS Audio Systems GPS Seat Controls Dashboard LEAD-FREE COMPATI- BLE COMPONENT MARKING A,

More information

Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V

Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V FEATURES Improved reliability 2x standard reduced by 25% to 0.0075 CV Robust against higher thermo-mechanical stresses during assembly process CV range: 0.10-680μF / 4-50V 6 case sizes available 130 low

More information

FEATURES. General purpose SMT chip tantalum series CV range: μF / V 10 case sizes in low profile option available APPLICATIONS

FEATURES. General purpose SMT chip tantalum series CV range: μF / V 10 case sizes in low profile option available APPLICATIONS FEATURES General purpose SMT chip tantalum series CV range: 0.10-1000μF / 2.5-50V 10 case sizes in low profile option available APPLICATIONS Entertainment/Infotainment systems LEAD-FREE COMPATIBLE COMPONENT

More information

FEATURES APPLICATIONS. General low power DC/DC and LDO

FEATURES APPLICATIONS. General low power DC/DC and LDO FEATURES General purpose SMT chip tantalum series 7 case sizes available Low profile options available CV range: 0.10-2200μF / 2.5-50V APPLICATIONS General low power DC/DC and LDO LEAD-FREE COMPATIBLE

More information

APPLICATIONS General medium power DC/DC convertors. CASE DIMENSIONS: millimeters (inches)

APPLICATIONS General medium power DC/DC convertors. CASE DIMENSIONS: millimeters (inches) FEATURES series of robust Mn0 2 solid electrolyte capacitors CV range: 0.15-1500μF / 2.5-50V 14 case sizes available Power supply applications APPLICATIONS General medium power DC/DC convertors LEAD-FREE

More information

General purpose SMT chip tantalum series 7 case sizes available Low profile options available CV range: μF / V

General purpose SMT chip tantalum series 7 case sizes available Low profile options available CV range: μF / V FEATURES General purpose SMT chip tantalum series 7 case sizes available Low profile options available CV range: 0.10-2200μF / 2.5-50V APPLICATIONS General low power DC/DC and LDO LEAD-FREE COMPATIBLE

More information

General purpose SMT chip tantalum series 6 case sizes available Low profile options available CV range: μF / V

General purpose SMT chip tantalum series 6 case sizes available Low profile options available CV range: μF / V General purpose SMT chip tantalum series 6 case sizes available Low profile options available CV range: 0.10-2200μF / 2.5-50V LEAD-FREE COMPATIBLE COMPONENT SnPb termination option is not RoHS compliant.

More information

CASE DIMENSIONS: millimeters (inches)

CASE DIMENSIONS: millimeters (inches) L A S A W 1 MARKING A, B, C, D, E, U CASE Polarity Band (Anode+) AVX LOGO 227 A XXXXX H W Value in pf 227 = 220μF Rated Voltage A = 10V ID CASE DIMENSIONS: millimeters (inches) The TBJ COTS-Plus SRC9000

More information

Rated DC Voltage 002 = 2.5Vdc 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 035 = 35Vdc 050 = 50Vdc

Rated DC Voltage 002 = 2.5Vdc 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 035 = 35Vdc 050 = 50Vdc TPS surface mount products have inherently low ESR (equivalent series resistance) and are capable of higher ripple current handling, producing lower ripple voltages, less power and heat dissipation than

More information

FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)

FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches) FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder

More information

深圳市骏达电子有限公司 电话 : 传真 :

深圳市骏达电子有限公司 电话 : 传真 : General purpose SMT chip tantalum series 6 case sizes available Low profile options available CV range: 0.10-2200μF / 2.5-50V For part marking see page 130 HOW TO ORDER TAJ C 106 Type TECHNICAL SPECIFICATIONS

More information

General purpose SMT chip tantalum series 6 case sizes available Low profile options available CV range: μF / V

General purpose SMT chip tantalum series 6 case sizes available Low profile options available CV range: μF / V General purpose SMT chip tantalum series 6 case sizes available Low profile options available CV range: 0.10-2200μF / 2.5-50V LEAD-FREE COMPATIBLE COMPONENT For part marking see page 130 CASE DIMENSIONS:

More information

FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)

FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches) FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder

More information

Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life

Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple

More information

FEATURES Compliant to the RoHS2 directive 2011/65/EU SMD J-lead Low profile case sizes

FEATURES Compliant to the RoHS2 directive 2011/65/EU SMD J-lead Low profile case sizes FEATURES Compliant to the RoHS2 directive 2011/65/EU SMD J-lead Low profile case sizes APPLICATIONS Handheld electronics USB accessories LEAD-FREE COMPATI- BLE COMPONENT CASE DIMENSIONS: millimeters (inches)

More information

Generic SMT chip tantalum series 5 key case sizes available Low profile options available

Generic SMT chip tantalum series 5 key case sizes available Low profile options available Generic SMT chip tantalum series 5 key case sizes available Low profile options available LEAD-FREE COMPATIBLE COMPONENT For part marking see page 123 CASE DIMENSIONS: millimeters (inches) Code EIA W+0.20

More information

W+0.2 (0.008) H+0.2 (0.008) L±0.2 (0.008) Tolerance K=±10% M=±20%

W+0.2 (0.008) H+0.2 (0.008) L±0.2 (0.008) Tolerance K=±10% M=±20% The TPS surface mount products have inherently low ESR (equivalent series resistance) and are capable of higher ripple current handling, producing lower ripple voltages, less power and heat dissipation

More information

Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type

Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long

More information

Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C

Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved capacitance retention at high frequencies.

More information

Overview. Benefits. One world. One KEMET

Overview. Benefits. One world. One KEMET T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 63 VDC Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable

More information

Snap-in Type Aluminium Electrolytic Capacitors

Snap-in Type Aluminium Electrolytic Capacitors Endurance: 85 2000hours Recommended Applications : Applying to switching power supply and other industry/ commercial field Corresponding product to RoHS SPECIFICATIONS Item Category Temperature Range -40~+85

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved capacitance retention at high frequencies.

More information

Technical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF

Technical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF www.niccomp.com/pcn Technical Support: tpmg@niccomp.com October 28 th 2016 SUB: EOL End of Life Notification Products impacted by this notice: NPC Series SMT Solid Polymer Aluminum Electrolytic Capacitors

More information

MIL-PRF Series. Military Conventional Wet Tantalum OUTLINE DIMENSIONS. CASE DIMENSIONS: millimeters (inches)

MIL-PRF Series. Military Conventional Wet Tantalum OUTLINE DIMENSIONS. CASE DIMENSIONS: millimeters (inches) This data sheet contains the MIL-PRF-39006 ratings for which AVX is a qualified approved supplier. This will be continually updated as the qualification expands. For COTS-Plus equivalent ratings please

More information

Case. Without Insulating With Insulatiing E Size Size (0.016)

Case. Without Insulating With Insulatiing E Size Size (0.016) The TWA series is an axial leaded wet electrolytic tantalum capacitor with a unique cathode system that promotes very high CV (Capacitance/Voltage) per cc in traditional MIL-PRF-39006 case sizes. The series

More information

16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:

16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of: T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working

More information

55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A

55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:

More information

(CWR11 Style) Overview. Tantalum Surface Mount Capacitors High Reliability T493 Commercial Off-The-Shelf (COTS) MnO 2

(CWR11 Style) Overview. Tantalum Surface Mount Capacitors High Reliability T493 Commercial Off-The-Shelf (COTS) MnO 2 T493 Commercial Off-The-Shelf (COTS) MnO 2 Overview The KEMET T493 is designed for the commercial offthe-shelf (COTS) requirements of military and aerospace applications. The T493 is a surface mount product,

More information

Contents CORNELL DUBILIER

Contents CORNELL DUBILIER Contents Products Listed by Type Designation........................................................ Chip and SMT Selector Guide................................................................... 1.001

More information

Multilayer Acrylic Polymer Film Capacitors

Multilayer Acrylic Polymer Film Capacitors FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC

More information

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice. 1. Features Ultra Low & high ripple

More information

Overview. Benefits. Applications. KEMET Organic Capacitor (KO-CAP ) High Reliability T543 COTS Polymer Electrolytic, VDC

Overview. Benefits. Applications. KEMET Organic Capacitor (KO-CAP ) High Reliability T543 COTS Polymer Electrolytic, VDC KEMET Organic Capacitor (KO-CAP ) High Reliability Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved

More information

For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k

For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal

More information

DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents

DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents DATA SHEET Supersedes data of 18th January 2000 File under BCcomponents, BC01 2000 Apr 07 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case,

More information

Snap-in Type Aluminium Electrolytic Capacitors

Snap-in Type Aluminium Electrolytic Capacitors Endurance:105 3000 hours Recommended Applications : Smoothing circuit, TV/Monitor,Adapter, SMPS Corresponding product to RoHS Long Life LG SPECIFICATIONS Item Category Temperature Range Range Rated acitance

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Overview The KEMET Aluminum Organic Capacitor (AO-CAP) is a solid state aluminum capacitor. The cathode is a conductive organic polymer which results in very low ESR and improved capacitance retention

More information

MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array

MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) Page 1 of 8 MA04/ 06_V03 Apr.2010 FEATURE 1. High reliability and stability

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder. Tantalum Surface Mount acitors Low Overview The low, surge-robust T495 Series is designed for demanding applications that require high surge current and high ripple current capability. This series builds

More information

KEMET Organic Capacitor (KO-CAP ) High Reliability T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.

KEMET Organic Capacitor (KO-CAP ) High Reliability T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2. T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 63 VDC Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable

More information

K05 TYPE -40 C +105 C 5000H

K05 TYPE -40 C +105 C 5000H K05 TYPE -40 C +105 C 5000H Surge-proof capacitor in aluminium can with insulation sleeve Safety vent at bottom case or aside case. Snap in terminals for PCB mounting. Very high CV for unit volume with

More information

Wet Tantalum Tubular Capacitors

Wet Tantalum Tubular Capacitors Castanet Tantalum Capacitors Wet Tantalum Tubular Capacitors CECC & ESA Axial & Surface Mount MIL-PRF-39006C Axial DSCC Drawing 93026 Axial High Temperature 200 C Axial & Surface Mount 150 Volt Rated Axial

More information

Miniature Aluminum Electrolytic Ca pac i tors

Miniature Aluminum Electrolytic Ca pac i tors ULTRA LOW IMPEDANCE, RADIAL LEADS, POLARIZED, ALUMINUM ELEC TRO LYT IC FEATURES VERY LOW IMPEDANCE LONG LIFE AT 105 C (1000 ~ 5000 hrs.) HIGH STABILITY AT LOW TEMPERATURE IDEALLY FOR SWITCHING POWER SUPPLIES

More information

Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance

Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on

More information

According to IEC , grade 1.1

According to IEC , grade 1.1 Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Overview The KEMET Organic acitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved capacitance retention at high frequencies. KO-CAP

More information

PHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1

PHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1 Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS CONSTRUCTION L B Pulse operation in SMPS, TV, monitor, electrical ballast and

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder. Tantalum Surface Mount acitors Low Overview The low, surge-robust T495 Series is designed for demanding applications that require high surge current and high ripple current capability. This series builds

More information

Series AM1D-Z 1 Watt DC-DC Converter

Series AM1D-Z 1 Watt DC-DC Converter FEATURES: RoHS compliant High efficiency up to 80% Low profile plastic package 7 pin SIP package Operating temperature -40 o C to + 85 o C Short circuit protection Pin compatible with multiple manufacturers

More information

CASE DIMENSIONS: millimeters (inches) R (0.081) 1.30 (0.051) Tolerance K=±10% M=±20%

CASE DIMENSIONS: millimeters (inches) R (0.081) 1.30 (0.051) Tolerance K=±10% M=±20% TAJ low profile solid tantalum chip capacitors are designed for boards with limited height. The capacitors are available in maximum height of 1.0, 1.2, 1.5 and 2.0mm. The S&T footprints are identical to

More information

Surface Mount Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW

More information

Tantalum Surface Mount Capacitors

Tantalum Surface Mount Capacitors Tantalum Surface Mount Capacitors Standard Tantalum One world. One KEMET. Electronic Components Tantalum Surface Mount Capacitors Standard Tantalum Table of Contents Page Why Choose KEMET... 3 T491 Series

More information

Dear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955

Dear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955 Littelfuse, Inc. 8755 West Higgins Road, Suite 5 Chicago, IL 6631 USA (773) 628-1 7.1,218 RE: LFPCN41214 From: Littelfuse Product Management Team Dear Customer, Please be aware that Littelfuse is discontinuing

More information

WR10, WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1210, 1206, 0805, 0603, 0402

WR10, WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1210, 1206, 0805, 0603, 0402 WR10, WR12, WR08, WR06, WR04, General purpose chip resistors Size 1210, 1206, 0805, 0603, 0402 ( Automotive & Anti-sulfuration ) *Contents in this sheet are subject to change without prior notice. Page

More information

WR02X ±5%, ±1% General purpose chip resistors Size 0201

WR02X ±5%, ±1% General purpose chip resistors Size 0201 WR02X ±5%, ±1% General purpose chip resistors Size 0201 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WR02X Version 03 Jul.-2004 FEATURE 1. Small size and light weight 2. High reliability

More information

tan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0

tan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0 Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant

More information

Application Note TES 1 Series

Application Note TES 1 Series 1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64

More information

Summary of Specifications

Summary of Specifications Series Large Can Screw Terminal 85 C General Purpose High Ripple Current Capability Extended Range to 550VDC Dimensions in Inches The series is ideal for inverter applications requiring high ripple current

More information

Typical applications include decoupling and filtering, in industrial and automotive high-end applications.

Typical applications include decoupling and filtering, in industrial and automotive high-end applications. Overview The KEMET T489 provides DC leakage current that is 25% lower than the commercial T491. The T489 also offers improved reliability, low ESR options and meets or exceeds the requirements of EIA standard

More information

WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array

WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size

More information

SMM SERIES Engineering Bulletin Mar 07

SMM SERIES Engineering Bulletin Mar 07 Series SERIES Snap Mount Downsize High Long Life RoHS Compliant 85 C Maximum Temperature The series is a high voltage, long life snap-in capacitor series that offers downsized versions of the SMH series.

More information

SolidMatrix 1206 Fast Acting Surface Mount Fuses

SolidMatrix 1206 Fast Acting Surface Mount Fuses SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing

More information

Tantalum Chip Capacitors

Tantalum Chip Capacitors FEATURES EXPANDED VALUE RANGE & REDUCED CASE SIZES MOLDED CONSTRUCTION FOR HIGH SOLDERING HEAT RESISTANCE ELEVEN CASE SIZES (J, P, A2, A, B2, B, C2, C, V, D AND E) BOTH FLOW AND REFLOW SOLDERING APPLICABLE

More information

Overview. Benefits. Applications. KEMET Organic Capacitor (KO-CAP ) T52X/T530 Polymer Electrolytic Capacitors

Overview. Benefits. Applications. KEMET Organic Capacitor (KO-CAP ) T52X/T530 Polymer Electrolytic Capacitors T52X/T530 Polymer Electrolytic Capacitors Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved capacitance

More information

Summary of Specifications

Summary of Specifications Series Snap Mount Large High CV High Ripple RoHS Compliant 85 C Maximum Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life

More information

WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1206, 0805, 0603, ( Automotive )

WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1206, 0805, 0603, ( Automotive ) WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors Size 1206, 0805, 0603, 0402 ( Automotive ) Page 1 of 9 WR_J(AUTO)_ V03 Sep.2010 FEATURE 1. Automotive grade AEC Q-200 compliant 2. 100% CCD

More information

part of the EVOX RIFA GROUP

part of the EVOX RIFA GROUP part of the EVOX RIFA GROUP 17 series Listed here are only samples of the range of Screw Terminal Capacitors we can produce. Electrical characteristics and case size are just two parameters that can be

More information

Surface Mount Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105

More information

ALUMINUM ORGANIC CAPACITORS

ALUMINUM ORGANIC CAPACITORS ALUMINUM ORGANIC CAPACITORS A700 Series APPLICATIONS Input/Output Filters for voltage regulators, converters, and SMPS Battery Decoupling (portable, handheld electronics) Power Decoupling (Procesor, Transmitter

More information

Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550

Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550 Standard capacitors Applications Frequency converters Uninterruptible power supplies All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Specifications

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder. Overview The KEMET T494 is a lower version of the popular T491, designed specifically for today s highly automated surface mount processes and equipment. The T494 combines KEMET s proven solid tantalum

More information

CONDUCTIVE POLYMER CHIP CAPACITORS

CONDUCTIVE POLYMER CHIP CAPACITORS FEATURES Polymer Cathode Technology Use Up to 80% of Rated Voltage (20% Derating) Low for part types > 10 Volts High Frequency Cap Retention Capacitance 15 to 1000µF (±20%) No-Ignition Failure Mode Voltage

More information

SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512

SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512 SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512 ( Automotive & Anti-sulfuration ) Page 1 of 7 SR20-25X_V04 Sep.-2011 FEATURE 1. High reliability and stability ±1% 2. Sulfuration resistant 1000ppm

More information

ALS40. ALS41 Stud Mounting

ALS40. ALS41 Stud Mounting 31 This range offers high CV per unit volume coupled with high ripple currents and long life performance at 105 C. They are also capable of handling high peak voltages and currents. Capacitance range...

More information

ALS30. ALS31 Stud Mounting

ALS30. ALS31 Stud Mounting 25 This range offers high CV per unit volume coupled with high ripple currents and long life performance. They are also capable of handling high peak voltages and currents. Capacitance range... 68µF to

More information

Overview. Benefits. Applications. Environmental Compliance. Tantalum Surface Mount Capacitors Low ESR T495 Surge Robust MnO 2

Overview. Benefits. Applications. Environmental Compliance. Tantalum Surface Mount Capacitors Low ESR T495 Surge Robust MnO 2 Tantalum Surface Mount acitors Low Overview The low, surge-robust T495 is designed for demanding applications that require high surge current and high ripple current capability. The T495 builds upon the

More information

Efficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.

Efficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting. DC/DC Converter Si ngle Output: 150 Watts DIN Rail -Option STD-Panel Mount / HC Features 4:1 wide Input range: 9~36V,18~75V & 43~160VDC Single output, up to 12.5A / 150 watts Rail EN50155 compliance High

More information

ALUMINUM ORGANIC CAPACITORS

ALUMINUM ORGANIC CAPACITORS ALUMINUM ORGANIC CAPACITORS A700 Series APPLICATIONS Input/Output Filters for voltage regulators, converters, and SMPS Battery Decoupling (portable, handheld electronics) Power Decoupling (Procesor, Transmitter

More information

150 C. RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

150 C. RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. T498 Automotive Grade MnO 2 150 C Overview The KEMET T498 Series is a high temperature product that offers optimum performance characteristics in applications with operating temperatures up to 150 C. Advanced

More information

WA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4

WA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4 WA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WA04X Version 15 Sept.-2004 FEATURE 1. Small size and light

More information

Overview. Benefits. Applications. KEMET Organic Capacitor (KO-CAP ) T52X/T530 Polymer Electrolytic Capacitors

Overview. Benefits. Applications. KEMET Organic Capacitor (KO-CAP ) T52X/T530 Polymer Electrolytic Capacitors T52X/T530 Polymer Electrolytic Capacitors Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved capacitance

More information

Metal Alloy Low-Resistance Resistor Specifications

Metal Alloy Low-Resistance Resistor Specifications Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following

More information

Series. Applications Typical applications include decoupling and filtering in military and aerospace applications.

Series. Applications Typical applications include decoupling and filtering in military and aerospace applications. High Reliability COTS (CWR11 Style) T493 Military/Aerospace COTS MnO 2 Overview The KEMET T493 is designed for the COTS (Commercial Off-The-Shelf) requirements of military and aerospace applications. This

More information

SH01S/D Series 1W DC/DC CONVERTER, SMD-Package

SH01S/D Series 1W DC/DC CONVERTER, SMD-Package SH01S/D Series 1W DC/DC CONVERTER, SMD-Package FEATURES Efficiecny up to 80% SMD Package with Industry Standard Pinout Operating Temperature Range 40 C to +8 C Moisture sensitivity level (MSL) 2 Isolation

More information

ESC Aluminum Electrolytic Capacitors

ESC Aluminum Electrolytic Capacitors H Description S Capacitors for high frequency applications. H Applications S Computers switching regulator mother board output. H Features S Case with D 6.0 mm has the safety vent at the bottom. H Diagram

More information

AVX High Reliability Tantalum Capacitors

AVX High Reliability Tantalum Capacitors AVX High Reliability Tantalum Capacitors www.avx.com Version 18.1 Contents Introduction................................................................................................... 2 High Reliability

More information