MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. I=0.01CV or 3(uA) after 2 minutes with rated working voltage
|
|
|
- Roland Lucas
- 5 years ago
- Views:
Transcription
1 series +105,High ( ), Low ( ) FEATURES Load life: ~4000hours Enabled high ripple current by a reduction of ESR at high frequency range switching power supply SPECIFICATIONS s Characteristics Category Temperature Rance -40 ~+105 (6.3~100V) -25 ~+105 (160~450V) Rated Voltage Range Nominal Capacitance Rance Capacitance Tolerance Leakage (MAX, 20 ) I=0.01CV or 3(uA) after 2 minutes with rated working voltage 6.3~450V.DC 1~6800 F 20%(120Hz,+20 ) I=0.03CV+40(uA) after 2 minutes with rated working voltage Dissipation Factor(MAX) Tan (20,120Hz) Load Life Shelf Life Low Temperature Stability Rate(MAX) Rated Voltage(V) ~ ~ Tan When nominal capacitance is over 1000 F,tan shall be added 0.02 to the listed value with Increase of every 1000 F After applying rated voltage with max ripple current for 2000~4000hrs at 105,the capacitors shall meet the following requirements D Load life Capacitance Change Within 25% of the initial value 5~ Dissipation Factor Not more than 200% of the specified value 8~ Leakage Not more than the specified value 12.5~ 4000 After Leaving capacitors under no load at 105 for 1000hrs,they meet the characteristic requirements listed at right Capacitance change Tan Leakage current Within 25% of the initial value 200% of initial specified value Initial specified value or less Rated Voltage(V ) ~ ~ Z-25 /Z Z-40 /Z CASE SIZE TABLE SLEEVE d D F 0.5 F L+ MAX 15MIN 4MIN D+0.5MAX d L 16: =1.5 L 20: =2.0 RIPPLE CURRENT MULTIPLIER Cap( F) Frequency(Hz) 120 1K 10K 100k ~ ~ ~
2 6.3V(0J) V(1A) Maximum Allowable (ma rms) at KHz Maximum ( ) at KHZ Maximum Allowable (ma rms) at KHz Maximum ( ) at KHZ
3 16V(1C) V(1E) Maximum Allowable (ma rms) at KHz Maximum ( ) at KHZ Maximum Allowable (ma rms) at KHz Maximum ( ) at KHZ
4 35V(1V) 50V(1H) Maximum Allowable (ma rms) at KHz Maximum ( ) at KHZ Maximum Allowable (ma rms) at KHz Maximum ( ) at KHZ
5 63V(1J) V(2A) V(2C) Maximum Allowable (ma rms) at KHz Maximum ( ) at KHZ 200V(2D) Maximum Allowable (ma rms) at KHz Maximum ( ) at KHZ
6 250V(2E) V(2V ) V(2G) Maximum Allowable (ma rms) at KHz Maximum ( ) at KHZ 450V(2W) Maximum Allowable (ma rms) at KHz Maximum ( ) at KHZ
Snap-in Type Aluminium Electrolytic Capacitors
Endurance: 85 2000hours Recommended Applications : Applying to switching power supply and other industry/ commercial field Corresponding product to RoHS SPECIFICATIONS Item Category Temperature Range -40~+85
Snap-in Type Aluminium Electrolytic Capacitors
Endurance:105 3000 hours Recommended Applications : Smoothing circuit, TV/Monitor,Adapter, SMPS Corresponding product to RoHS Long Life LG SPECIFICATIONS Item Category Temperature Range Range Rated acitance
16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:
T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working
For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k
T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal
Aluminum Electrolytic Capacitor JNK
FEATES Extended Lifetime at High ripple current High Professional Switch Mode Power Supplies Frequency Converters SPECIFICATIONS Items Performance Characteristics Operating Temperature Range ( ) -40 ~
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. High frequency,low impedance. Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc.
S YD286 Series High frequency,low edance 105, 2000 hours Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc. Specifications: Item Characteristics Rated Voltage Range: 6.3V ~100VDC
tan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0
Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant
Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type
Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long
Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
Radial Type Aluminium Electrolytic Capacitors
SH Radial Type Aluminium Electrolytic acitors Endurance: 105 2000hours SH Recommended Applications :For high quality, reliability application, high CV product High Temperature Corresponding product to
ESC Aluminum Electrolytic Capacitors
H Description S Capacitors for high frequency applications. H Applications S Computers switching regulator mother board output. H Features S Case with D 6.0 mm has the safety vent at the bottom. H Diagram
DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents
DATA SHEET Supersedes data of 18th January 2000 File under BCcomponents, BC01 2000 Apr 07 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case,
Long life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options
TS-HC Series 105 C, 2000 hours Long life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options RoHS Compliant Rated
-40 to C 6.3 to 50 V.DC 22 to 6800 µ F ±20 % (120Hz/+20 C) I < 0.01 CV (µa) after 2 minutes application of rated working voltage at +20 C
Radial Type Series: FM Type :A n Features Low impedance(40 to 70% less than FC Series) Endurance : 2000 to 7000 hours at +105 C Country of Origin Japan Malaysia China n s Category temp. range Rated W.V.
handbook, halfpage 059 PLL-SI 200 V, 250 V, 400 V, 450 V Category temperature range 25 to +105 C Endurance test at 105 C
FEATURES Polarized aluminium electrolytic capacitors, non-solid arge types, very small dimensions, cylindrical aluminium case, insulated with a blue sleeve Pressure relief on the top of the aluminium case
Low ESR and High Frequency Radial Electrolytic Capacitor. TZE Series. Features. Applications. Dimensions (in mm)
Low ESR and High Frequency Radial Electrolytic Capacitor Low ESR and High Frequency Radial Electrolytic Capacitor Features Radial leads, cylindrical aluminum case Low impedance and high frequency High
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS. (at 20 after 5 minutes) Dissipation Factor (tanδ) 420 & 450V 0.20
from KMQ series Endurance with ripple : 2,000 to 3,000 hours at 105 Non solvent resistant type RoHS Compliant LXS P246 KMS P225 Downsized LXQ P249 KMM KMQ P215 SPECIFICATIONS Items Category Temperature
Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550
Standard capacitors Applications Frequency converters Uninterruptible power supplies All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Specifications
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice. 1. Features Ultra Low & high ripple
KMG Series. Miniature General Purpose Solvent Proof 105 C Maximum Temperature
Miniature General Purpose Solvent Proof 5 C Temperature The series capacitors are designed for general purpose use with an operating temperature range for most of these capacitors from 55 C to 5 C. The
55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A
Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:
Aluminum Capacitors Power High Ripple Current Screw Terminals
101/102 PHR-ST Aluminum Capacitors FEATURES ST STB Fig.1 Component outline Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated with a blue
Miniature Aluminum Electrolytic Ca pac i tors
ULTRA LOW IMPEDANCE, RADIAL LEADS, POLARIZED, ALUMINUM ELEC TRO LYT IC FEATURES VERY LOW IMPEDANCE LONG LIFE AT 105 C (1000 ~ 5000 hrs.) HIGH STABILITY AT LOW TEMPERATURE IDEALLY FOR SWITCHING POWER SUPPLIES
Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial ead Type Series : FC Type : A Features : 105 C h to 5000 h ow impedance RoHS compliant Specifications Category temperature range 55 C to +105 C Rated voltage range 6.3 V.DC to 100 V.DC Capacitance
Summary of Specifications
Series Snap Mount Large High CV High Ripple RoHS Compliant 85 C Maximum Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life
ALS40. ALS41 Stud Mounting
31 This range offers high CV per unit volume coupled with high ripple currents and long life performance at 105 C. They are also capable of handling high peak voltages and currents. Capacitance range...
ALS30. ALS31 Stud Mounting
25 This range offers high CV per unit volume coupled with high ripple currents and long life performance. They are also capable of handling high peak voltages and currents. Capacitance range... 68µF to
Summary of Specifications
Miniature General Purpose Solvent Proof Large and Small 85 C Temperature Actual Size The series capacitors are a miniaturized version of the SME series. These capacitors are designed for a load life of,000
Radial Aluminium Electrolytic Capacitors 105 C
Radial Aluminium Electrolytic Capacitors 105 C Standard, miniaturized, Endurance 1.000h to 2.500h at 105 C Rated voltage range: 6,3V to 100V, Rated capacitance range: 0,47µF to 12.000µF range: Ø 5,5 x
handbook, halfpage lower RLL 116
FEATURES Polarized aluminium electrolytic capacitors, non-solid Radial leads, cylindrical aluminium case with pressure relief, insulated with a blue vinyl sleeve Charge and discharge proof Long useful
Wet Tantalum Tubular Capacitors
Castanet Tantalum Capacitors Wet Tantalum Tubular Capacitors CECC & ESA Axial & Surface Mount MIL-PRF-39006C Axial DSCC Drawing 93026 Axial High Temperature 200 C Axial & Surface Mount 150 Volt Rated Axial
Summary of Specifications
Series Large Can Screw Terminal 85 C General Purpose High Ripple Current Capability Extended Range to 550VDC Dimensions in Inches The series is ideal for inverter applications requiring high ripple current
LPH Large Capacitance Aluminum Electrolytic Capacitors
Series LPH 105 C, Miniaturized, High-Reliability, High-Ripple Capacitors ULTRAMINI, HIGH RELIABLILITY TYPE Smaller-sized and higher-ripple than L3J. Guaranteed for 2000 hours at 105 C. Outline Drawing
K05 TYPE -40 C +105 C 5000H
K05 TYPE -40 C +105 C 5000H Surge-proof capacitor in aluminium can with insulation sleeve Safety vent at bottom case or aside case. Snap in terminals for PCB mounting. Very high CV for unit volume with
Large Can Aluminum Electrolytic Capacitors
FEATURES LONG LIFE AT +105 C (2,000 ~ 3,000 HOURS) HIGH RIPPLE CURRENT HIGH VOLTAGE (UP TO 500VDC) SUITABLE FOR SWITCHING POWER SUPPLIES SPECIFICATIONS *See System for Details Operating Temperature Range
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on
Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
Aluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals
Aluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic
Aluminum Capacitors Power Ultra Long Life Snap-In
059 PLL-SI QUICK REFERENCE DATA DESCRIPTION Nominal case size (Ø D x L in mm) Fig.1 Component outlines 159 miniaturized 85 C PUL-SI VALUE 22 x 25 to 35 x 60 157 PUM-SI Rated capacitance range (E6/E12 series),
W.V. (V) tan δ For capacitance value > 1000 µf, add 0.02 per every 1000 µf.
Radial Lead Type Series: FC Type: A Features Endurance : 105 C h to 5000 h Low impedance RoHS directive compliant Specifi cations Category Temp. Range 55 C to +105 C Rated Range 6.3 V.DC to 100 V.DC Nominal
1.0 Rated Values and Operational Data
Applications Protection and Commutation Power Electronics Impulsional devices with intensive / High Current Switching Power Supplies Main Characteristics Dry film-foil technology Nominal Voltage: 630 VDC
Aluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In
Aluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In FEATURES Useful life: 2000 h at 105 C Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, miniaturized
SMM SERIES Engineering Bulletin Mar 07
Series SERIES Snap Mount Downsize High Long Life RoHS Compliant 85 C Maximum Temperature The series is a high voltage, long life snap-in capacitor series that offers downsized versions of the SMH series.
Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size
Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching
Japan Malaysia China. Frequency(Hz) k 10k 100k 1.0 to φ10. ( 6.3mm dia) Vent P±0.5
Radial Lead Type Series: FC Type :A Features Endurance : 5 C 00 h to 5000 h Low impedance Japan Malaysia China Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance
Type 381LX / 383LX 105 C High Ripple, Snap-In Aluminum High Ripple, Long Life, 2, 4 and 5 pin styles available
High Ripple, Long Life, 2, 4 and 5 pin styles available Specifications Temperature Range Rated Voltage Range Adding longer-life and more ripple capability to the excellent value of Type 380L/LX capacitors,
PERFORMANCE SPECIFICATION SHEET
INCHPOUND MILPRF39006/31D 21 March 2018 SUPERSEDING MILPRF39006/31C 21 April 2011 PERFORMANCE SPECIFICATION SHEET CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED SLUG),
Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size
Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching
Aluminum Electrolytic Capacitors Radial Very Low Impedance
Aluminum Electrolytic Capacitors Radial Very Low Impedance FEATURES Very low impedance and low ESR Very long useful life: 4000 h to 0 000 h at 05 C, very high reliability Excellent ripple current capability
Type 381EL 105 ºC Ultra-Long Life Snap-In, Aluminum More than 100,000 Hours Operation at 65 C and Rated 105 C Ripple OBSOLETE
Specifications Temperature Range Rated Voltage Range 160 to 450 Vdc Capacitance Range 39 µf to 2,200 µf ± 20% Capacitance Tolerance ± 20% Leakage Current Ripple Current Multipliers The new 381EL extends
Aluminum Capacitors, Power High Ripple Current, Screw Terminals
Aluminum Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic capacitors,
SWITCH-MODE CERAMIC CAPACITORS
Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and
Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature
Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, insulated with a blue
Type CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor
High CV, Screw Terminal Capacitors Specifcations Type CGS screw terminal, aluminum electrolytic capacitors have a high CV rating and are suitable for use in most demanding applications requiring high current
YAGEO Corporation Date: 01/17/2007
YAGEO Corporation Date: 01/17/2007 Aluminum Electrolytic Capacitors File:2063 Engineering Bulletin for SC Type Page: 1/7 SC Type -40 to +105 C Very low impedance and ESR, miniature aluminum electrolytic
MIL-PRF Series. Military Conventional Wet Tantalum OUTLINE DIMENSIONS. CASE DIMENSIONS: millimeters (inches)
This data sheet contains the MIL-PRF-39006 ratings for which AVX is a qualified approved supplier. This will be continually updated as the qualification expands. For COTS-Plus equivalent ratings please
Surface Mount Multilayer Varistors
ESD Protection (ES) Series Fast Response < 0.5 ns Low Working 5 V Low Capacitance Low Leakage Current < 1 μa Low Application Fields: Cell Phones Digital Cameras PDAs MP3 Notebooks Working (Max) (Max) Leakage
part of the EVOX RIFA GROUP
part of the EVOX RIFA GROUP 17 series Listed here are only samples of the range of Screw Terminal Capacitors we can produce. Electrical characteristics and case size are just two parameters that can be
Aluminum Capacitors Power High Ripple Current Snap-In
Aluminum Capacitors 198 PHR-SI 057 PSM-SI smaller dimensions Fig. 1 Component outlines 198 PHR-SI QUICK REFERENCE DATA longer life higher ripple 157 PUM-SI DESCRIPTION VALUE Nominal case size (Ø D x L
CapXon LD Series LD Series H Features Updated Series Preliminary Data Sheet Standard capacitors
Updated Series Preliminary Data Sheet 85 5000H Features Standard capacitors Applications Switch-mode power supplies in industrial and entertainmentelectronics Uninterruptible power supplies Features High
Summary of Specifications
Series Large Can Screw Terminals High Ripple 6.3 to 400VDC Range Dimensions in Inches RoHS Compliant 105 C Maximum Temperature The series allows for extremely high ripple currents for applications such
W+0.2 (0.008) H+0.2 (0.008) L±0.2 (0.008) Tolerance K=±10% M=±20%
The TPS surface mount products have inherently low ESR (equivalent series resistance) and are capable of higher ripple current handling, producing lower ripple voltages, less power and heat dissipation
YAGEO Corporation Date: 01/17/2007
YAGEO Corporation Date: 01/17/2007 Aluminum Electrolytic Capacitors File:2052 Engineering Bulletin for SK Type Page: 1/7 SK Type +85ºC Single-ended lead aluminum electrolytic capacitors for the rated voltage
U36D SERIES Engineering Bulletin Mar 07
Series SERIES Large Can Screw Terminals High Ripple Up to 550VDC Dimensions in Inches RoHS Compliant 85 C Maximum Temperature The series is ideal for inverter applications requiring high ripple current
Summary of Specifications
Large an Screw erminals Longer Life U36 Grade High Ripple 350 to 500VD Ratings RoHS ompliant 85 Maximum emperature he series is a longer life version of the industry standard U36D specifically designed
Frequency (Hz) 50, k 10 k to Correction factor min. 3 min.
Radial Lead Type Series: M Type: A Features Smaller than series SU RoHS directive compliant Specifi cations Category Temp. Range 40 C to + 85 C 25 C to +85 C Rated Range 6.3 V.DC to 100 V.DC 160 V.DC to
Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In
Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In 057 PSM-SI smaller dimensions 159 PUL-SI 105 C 157 PUM-SI Fig. 1 longer life higher ripple 198 PHR-SI QUICK REFERENCE DATA DESCRIPTION VALUE
4.0±0.5 (3.5) Top of spin. Standard terminal type does not require terminal trimming peocess.
Snap-in Type Series: HC Type: TS Features 30 % smaller than series TS-HB RoHS directive compliant Specifi cations Category Temp. Range 40 C to +105 C 25 C to +105 C Rated Range 10 V.DC to 100 V.DC 160
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In 059 PLL-SI 159 miniaturized 85 C PUL-SI Fig. 1 157 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 22 x 25
Surface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
Aluminum Capacitors Standard - 85 C Snap-In
Aluminum Capacitors Standard - 85 C Snap-In FEATURES Useful life: 2000 h at +85 C Polarized aluminum electrolytic capacitors Small dimension High C x U product Material categorization: for definitions
Contents CORNELL DUBILIER
Contents Products Listed by Type Designation........................................................ Chip and SMT Selector Guide................................................................... 1.001
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
Case. Without Insulating With Insulatiing E Size Size (0.016)
The TWA series is an axial leaded wet electrolytic tantalum capacitor with a unique cathode system that promotes very high CV (Capacitance/Voltage) per cc in traditional MIL-PRF-39006 case sizes. The series
CROSS-SECTION CONSTRUCTION
Skywell s OP-CON is aluminum solid electrolytic capacitor that uses organic semiconductors as electrolytes. Organic semiconductor has a high conductivity and high-temperature stability, therefore OP-CON
YAGEO Corporation Date: 2/22/2011
YAGEO Corporation Date: 2/22/2011 Aluminum Electrolytic Capacitors File:2052 Engineering Bulletin for SK Type Page: 1/29 SK Type +85ºC Single-ended lead aluminum electrolytic capacitors for the rated voltage
ALUMINUM ELECTROLYTIC CAPACITORS
Application Guidelines 1-1-1. Circuit Design (1) Please make sure the application and mounting conditions to which the capacitor will be exposed are within the conditions specified in the catalog or alternate
Type 380LX / 382LX 85 C High Capacitance, Snap-In Aluminum
The excellent value of Type 380L/LX capacitors finds application in switching power supply input and output circuits and even motor drives where the high surface area of multiple units in parallel approaches
APPLICATIONS Smart phone, Tablets, Notebook, LCD TV, Power supplies. P (0.081) 1.35 (0.050) 1.50 (0.059) max
FEATURES Conductive polymer electrode Benign failure mode under recommended use conditions Lower 3x reflow 260 C compatible CV range: 0.47-470μF / 2.5-125V 18 case sizes available APPLICATIONS Smart phone,
Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial ead Type Series : M Type : A Features Smaller than series SU RoHS compliant Specifications Category temperature range 40 C to + 85 C 25 C to +85 C range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC
Metallized Polypropylene Film Capacitors PCPW 245 ( DC-link application )
FEATURE ㆍHigh capacitance density dc-link capacitor ㆍHigh safety, Self-healing and self-protecting function built in ㆍLong product life, high reliability ㆍLow loss dielectric APPLICATION For DC filtering,
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
CROSS-SECTION CONSTRUCTION
Skywell s UNI-CON is aluminum solid electrolytic capacitor that uses organic semiconductors as electrolytes. Organic semiconductor has a high conductivity and high-temperature stability, therefore UNI-CON
Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES
CASE DIMENSIONS: millimeters (inches) Code H, K, L, O, S, T, X CASE 156 J XXXXX 156 = 15µF ID Code HO TO ORDER TCN L 157 FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode
Polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
Not for new design use DCMC series
High Capacitance Computer Grade Type DCM.. Best Value Capacitance/Type DCMX.. Maximum Capacitance These aluminum electrolytic capacitors are designed for power supply filters, welding equipment, computer
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In 158 PUL-SI 090 miniaturized 85 C PUL-SI Fig. 1 156 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 22 x 25
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
6.3 W.V < D(06.3) Miniature > 10 W.V 1000 hours ±20 %
Surface Mount Type Series: S Type: V Features Endurance: 85 C 2000 h Vibration-proof product is available upon request. (08 mm and larger) AEC-Q200 qualifi ed RoHS directive compliant s Category Temp.
CAPACITORS CERAMIC DISC CAPACITORS DAVID USE PHOTO SD0010 POLYESTER CAPACITORS ELECTROLYTIC CAPACITORS CERAMIC TRIMMER CAPACITORS TUNNING CAPACITORS
CAPACITORS CERAMIC DISC CAPACITORS DAVID USE PHOTO SD0010 POLYESTER CAPACITORS ELECTROLYTIC CAPACITORS CERAMIC TRIMMER CAPACITORS TUNNING CAPACITORS DAVID USE PHOTO SD0010 AXIAL ELECTROLYTIC CAPS 2041
Type 947C Polypropylene, DC Link Capacitors High Current, High Capacitance for Inverter Applications
Specifications Type 947C series uses the most advanced metallized film technology for long life, high reliability in DC Link applications. This series delivers high capacitance, high voltage and high ripple
ALC40 Series 105 C. RoHS. Compliant
ALC40 Series Compact Long life, 9000 hours at 105 C (Ur, Ir applied High ripple current Excellent surge voltage capability Optimized designs available on request RoHS Compliant application Suited for high
ALC10 Series 85 C. RoHS. Compliant
ALC10 Series Compact size Long Life, 18000 hours at (Ur, Ir applied High ripple current Excellent surge voltage capability Optimized designs available on request RoHS Compliant application They are ideally
Aluminum Capacitors Standard C Snap-In
Aluminum Capacitors Standard - 105 C Snap-In FEATURES Useful life: 2000 h at +105 C Polarized aluminum electrolytic capacitors Small dimensions High C x U product Material categorization: for definitions
Rated DC Voltage 002 = 2.5Vdc 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 035 = 35Vdc 050 = 50Vdc
TPS surface mount products have inherently low ESR (equivalent series resistance) and are capable of higher ripple current handling, producing lower ripple voltages, less power and heat dissipation than
OBSOLETE. General Specifications. Key Features. Applications. Outline Dimensions CLR 79 (MIL-C-39006/22) CLR 81 (MIL-C-39006/25)
General Specifications Operating : Working Voltage: Key Features Applications -55 C to +125 C, with voltage derating above 85 C, ( voltage at 125ºC is 2/3 of the value at 85ºC) 6 to 125 WVdc Tolerance:
Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES
FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode Benign failure mode under recommended use conditions Lower Undertab terminations layout: - High Volumetric Efficiency
V35, V40, V50, V60, V75, V95, V130, V140, V150, V175, V230, V250, V275, V300, V385, V420, V460, V510 CSA Recognized File No.
Description Disc Varistors with Radial Leads are standard metal oxide varistors designed mainly for electronic applications. They offer excellent surge protection for use in PCB s, computers, power supplies,
Inverter Grade Screw Terminal
Inverter Grade Screw Terminal electrolytic high 350 to 22,000 µf 250 to 500 WVdc 10% +50% 40 to +85 ºC Ambient Temperature +35 ºC +45 ºC +55 ºC +65 ºC +75 ºC +85 ºC 2.45 2.25 2.00 1.70 1.40 1.00 Rated