W2A (0508) Capacitor Arrays. 4 pcs 0402 Capacitors = 1 pc 0508 Array. 2.1 (0.083) AREA = 3.95mm2 (0.156 in2)
|
|
- William Stephens
- 5 years ago
- Views:
Transcription
1 apacitor rray apacitor rray (I) NFI OF UING IOR RRY V capacitor arrays offer designers the opportunity to lower placement costs, increase assembly line output through lower component count per board and to reduce real estate requirements. Reduced osts lacement costs are greatly reduced by effectively placing one device instead of four or two. his results in increased throughput and translates into savings on machine time. Inventory levels are lowered and further savings are made on solder materials, etc. pace aving pace savings can be quite dramatic when compared to the use of discrete chip capacitors. s an example, the element array offers a space reduction of >40% vs. 4 x 0402 discrete capacitors and of >70% vs. 4 x 0603 discrete capacitors. (his calculation is dependent on the spacing of the discrete components.) Increased hroughput ssuming that there are 220 passive components placed in a mobile phone: reduction in the passive count to 200 (by replacing discrete components with arrays) results in an increase in throughput of approximately 9%. reduction of 40 placements increases throughput by 18%. For high volume users of cap arrays using the very latest placement equipment capable of placing 10 components per second, the increase in throughput can be very significant and can have the overall effect of reducing the number of placement machines required to mount components: If 120 million 2-element arrays or 40 million 4-element arrays were placed in a year, the requirement for placement equipment would be reduced by one machine. uring a 20Hr operational day a machine places 720K components. Over a working year of 167 days the machine can place approximately 120 million. If 2-element arrays are mounted instead of discrete components, then the number of placements is reduced by a factor of two and in the scenario where 120 million 2-element arrays are placed there is a saving of one pick and place machine. maller volume users can also benefit from replacing discrete components with arrays. he total number of placements is reduced thus creating spare capacity on placement machines. his in turn generates the opportunity to increase overall production output without further investment in new equipment. 2 (0508) apacitor rrays 4 pcs 0402 apacitors = 1 pc 0508 rray (0.055) (0.039) 1.88 (0.074) 5.0 (0.197) R = 7.0mm2 (0.276 in2) 2.1 (0.083) R = 3.95mm2 (0.156 in2) he element capacitor array gives a space saving of over 40% vs four 0402 discretes and over 70% vs four 0603 discrete capacitors. 3 (0612) apacitor rrays 4 pcs 0603 apacitors = 1 pc 0612 rray (0.091) (0.059) 2.0 (0.079) 6.0 (0.236) R = 13.8mm2 (0.543 in2) 3.2 (0.126) R = 6.4mm2 (0.252 in2) he element capacitor array gives a space saving of over 50% vs four 0603 discretes and over 70% vs four 0805 discrete capacitors. 64
2 apacitor rray apacitor rray (I) GNRL RIION lement lement V is the market leader in the development and manufacture of capacitor arrays. he array family of products also includes the element device as well as element and 4-element series, all of which have received widespread acceptance in the marketplace. V capacitor arrays are available in 5R, 7R and N0 (0G) ceramic dielectrics to cover a broad range of capacitance values. Voltage ratings from 6.3 Volts up to 100 Volts are offered. V also now offers a range of automotive capacitor arrays qualified to -Q200 (see separate table). Key markets for capacitor arrays are Mobile and ordless hones, igital et op oxes, omputer Motherboards and eripherals as well as utomotive applications, RF Modems, Networking roducts, etc. V apacitor rray - 241***K 21 Magnitude mag. (d) pF 15pF 33pF 68pF 10pF 22pF 39pF Frequency (GHz) HO O ORR M 2 tyle = RoH L = nb ase ize 2 = = 0612 rray Number of aps 2 = 2 lement 4 = 4 lement Voltage 6 = 6V Z = 10V Y = 16V 3 = 25V 5 = 50V 1 = 100V ielectric = N0 = 7R = 5R apacitance ode 2 ig igits + Number of Zeros apacitance olerance J = ±5% K = ±10% M = ±20% Failure Rate = ommercial 4 = utomotive ermination ode * = lated Ni and n *Z = FLIRM * = 5% min lead * = FLIRM with 5% min lead *RoH ompliant ackaging & Quantity ode 2 = 7" Reel (4000) 4 = 13" Reel (10000) 2F = 7" Reel (1000) *Not RoH ompliant NO: ontact factory for availability of ermination and olerance Options for pecific art Numbers. 65
3 apacitor rray apacitance Range N0/0G IZ 2 = = 0612 # lements 4 4 oldering Reflow/ave Reflow/ave ackaging aper/mbossed aper/mbossed Length mm 1.30 ± ± (in.) (0.051 ± 0.006) (0.063 ± 0.006) idth mm 2.10 ± ± 0.20 (in.) (0.083 ± 0.006) (0.126 ± 0.008) Max. mm hickness (in.) (0.037) (0.053) V R0 ap 1.0 1R2 (pf) 1.2 1R R R R R R R R R R = upported Values 66
4 apacitor rray apacitance Range 7R IZ 2 = = = 0612 # lements oldering Reflow/ave Reflow/ave Reflow/ave ackaging ll aper aper/mbossed aper/mbossed Length mm 1.30 ± ± ± (in.) (0.051 ± 0.006) (0.051 ± 0.006) (0.063 ± 0.006) idth mm 2.10 ± ± ± 0.20 (in.) (0.083 ± 0.006) (0.083 ± 0.006) (0.126 ± 0.008) Max. mm hickness (in.) (0.037) (0.037) (0.053) V ap (pf) ap (μf)
5 apacitor rray R & LYOU IMNION millimeters (inches) lement lement /L OF HI L L /L OF HI L /L OF HI L L L L L L LYOU LYOU LYOU R IMNION L L 1.30 ± ± M 0.43 ± ± RF 0.50 ± 0.10 (0.051 ± 0.006) (0.083 ± 0.006) (0.037 M) (0.017 ± 0.004) (0.013 ± 0.003) (0.039 RF) (0.020 ± 0.004) lement L L 1.30 ± ± M 0.25 ± ± RF 0.75 ± ± 0.10 (0.051 ± 0.006) (0.083 ± 0.006) (0.037 M) (0.010 ± 0.003) (0.008 ± 0.003) (0.020 RF) (0.030 ± 0.004) (0.010 ± 0.004) lement L L ± ± M 0.41 ± RF 1.14 ± ± 0.10 (0.063 ± 0.008) (0.126 ± 0.008) (0.053 M) (0.016 ± 0.004) ( ) (0.030 RF) (0.045 ± 0.004) (0.015 ± 0.004) LYOU IMNION (0.027) (0.052) (0.079) (0.018) (0.039) lement (0.022) (0.052) (0.074) (0.012) (0.020) lement (0.035) (0.065) (0.100) (0.018) (0.030) 69
GENERAL DESCRIPTION. AVX Capacitor Array - W2A41A***K S21 Magnitude Frequency (GHz)
apacitor rray apacitor rray (I) NFIS OF USING IOR RRYS V capacitor arrays offer designers the opportunity to lower placement costs, increase assembly line output through lower component count per board
More informationSurface Mount Aluminum Electrolytic Capacitors NACZF Series
FETURES YLINRIL LELESS TYPE FOR SURFE MOUNTING HIGH PITNE VLUES (UP TO 6800µF) LO IMPENE/HIGH RIPPLE URRENT T 100KHz 12.5mm x 17mm ~ 18mm x 22mm SE SIZES IE TERMINTION STYLE FOR HIGH VIRTION.PPLITIONS
More informationSurface Mount Aluminum Electrolytic Capacitors
FETURES YLINDRIL V-HIP ONSTRUTION FOR SURFE MOUNTING REDUED SIZE VILLE WITH NTI-VIRTION TERMINTIONS (8 & 10mm DIMETER) SUIT FOR HIGH TEMPERTURE REFLOW SOLDERING (UP TO 260 ) 2,000 HOUR LOD LIFE @ +105
More informationU37F SERIES Engineering Bulletin Mar 2013
EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 5,000 Hours Lifetime at 85 Up to 150,000 Hours Useful Life he series is a general purpose, screw mount U37
More informationU37X SERIES Engineering Bulletin Mar 2013
EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 15,000 Hours Lifetime at 85 Up to 175,000 Hours Useful Life he series is the longest life version of the
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES YLINDRIAL V-HIP ONSTRUTION FOR SURFAE MOUNTING AVAILALE WITH ANTI-VIRATION WIDE TERMINATIONS VERY LOW IMPEDANE & HIGH RIPPLE URRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105 ) SUITALE
More informationU37L SERIES Engineering Bulletin Mar 2013
EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 10,000 Hours Lifetime at 85 Up to 175,000 Hours Useful Life he series is a longer life version of the U37
More informationDatasheet RS Pro RS Series Thick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063W ±100ppm/ C RS Stock No:
Datasheet RS Pro RS Series hick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063 ±100ppm/ C RS Stock No: 716-8721 Product Details RS Pro 0402 thick film surface mount resistor with ±1% tolerance, provides
More informationSMPS Capacitors Chip Assemblies
MP Capacitors CH/CV - Radial, Dual-in-ine, 4 Terminal/MT J & Ranges The CH/CV range exhibits low ER/E making them well suited for high frequency applications. ith its PME technology, the range exhibits
More informationLow Inductance Capacitors
ow Inductance Capacitors Introduction he signal integrity characteristics of a Power Delivery Network (PDN) are becoming critical aspects of board level and semiconductor package designs due to higher
More informationSummary of Specifications
Large an Screw erminals Longer Life U36 Grade High Ripple 350 to 500VD Ratings RoHS ompliant 85 Maximum emperature he series is a longer life version of the industry standard U36D specifically designed
More informationSurface Mount Aluminum Electrolytic Capacitors
FETURES YLINRIL V-HIP ONSTRUTION FOR SURFE MOUNTING SUIT FOR HIGH TEMPERTURE REFLOW SOLERING (UP TO 260 ) 2,000 HOUR LO LIFE @ +85 ) ESIGNE FOR UTOMTI MOUNTING N REFLOW SOLERING HRTERISTIS Rated Voltage
More informationSurface Mount Aluminum Electrolytic Capacitors
FETURES YLINRIL V-HIP ONSTRUTION LONG LIFE (7,000 ~ 10,000 HOURS) IE TEMPERTURE RNGE (-25 ~ +105 ) ESIGNE FOR REFLO SOLERING RoHS ompliant includes all homogeneous materials *See Part Number System for
More informationGas Discharge Tubes GTCC23-XXXM-R01-2 Series
Littelfuse Circuit Protection 3mm 2Pole Chip type GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission
More informationMultilayer Ceramic Chip Capacitors
RoHS Compliant FEATURES Includes all homogeneous materials STANDARD EIA 0805 & 1206 PACKAGING *See Part Number System for Details EACH COMPONENT CONTAINS 4 ISOLATED CERAMIC CAPACITORS AVAILABLE IN A WIDE
More informationRadial Leads/SkyCap /AR Series
Radial Leads/SkyCap /AR Series AUTOMOTIVE GENERAL INFORMATION AVX AR Series Conformally Coated Radial Leaded MLC Temperature Coefficients: C0G (NP0), X7R, X8R 3000, 2000, 1000, 200, 100, 50 Volts Case
More informationHigh Voltage PolyTerm Ceramic Capacitors
High PolyTerm Ceramic Capacitors Standard MLCCs are prone to cracking due to mishandling, depanelization, and board flexing. In response to customer requests for higher resistance to mechanical stress,
More informationResin Dipped, Solid Tantalum Capacitors
Resin ippe, oli antalum Capacitors NM eries FEAURE FUIIZE BE ROCE NE REUCE IZE FAME REARAN COAING O EAKAGE CURREN AN IMEANCE EXCEIONA EMERAURE ABIIY ECIFICAION Capacitance Range 0.1µF ~ 330µF Ro Compliant
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications
Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications ELECTRICAL SPECIFICATIONS FEATURES Manufactured with a combination of design, materials and tight process control to achieve
More informationEUROPEAN SIZES SMPS STACKED CAPACITORS
EUROPEAN SIZES SMPS STACKED X7R AND NPO STACKED CAP DIMENSIONS 0.25 ± 0.050 (0.010 ±.002) All Measurements Millimeters (inches) 6.35 (0.250) Min. 0.25 ± 0.050 (0.010 ±.002) 2.54 (0.100) Max. 0.64 (0.025)
More informationALUMINUM ORGANIC CAPACITORS
ALUMINUM ORGANIC CAPACITORS A700 Series APPLICATIONS Input/Output Filters for voltage regulators, converters, and SMPS Battery Decoupling (portable, handheld electronics) Power Decoupling (Procesor, Transmitter
More informationSolid-Electrolyte TANTALEX Capacitors, Military MIL-PRF-39003/01 Qualified, Style CSR13
olid-electrolyte TANTALEX apacitors, ilitary IL-F-39003/01 Qualified, tyle 13 FEATUE Hermetically sealed etal cased Axial lead Weibull failure rates,,, Exponential failure rates,,, Tape and reel available
More informationALUMINUM ORGANIC CAPACITORS
ALUMINUM ORGANIC CAPACITORS A700 Series APPLICATIONS Input/Output Filters for voltage regulators, converters, and SMPS Battery Decoupling (portable, handheld electronics) Power Decoupling (Procesor, Transmitter
More information1.0" Min. L.S..762/.030. Styles SR15, SR20, SR30, SR40, SR50
Radial Leads/SkyCap GENERAL INFORMATION AVX SR Series Conformally Coated Radial Leaded MLC Temperature Coefficients: C0G (NP0), X7R, Z5U 200, 100, 50 Volts (300V, 400V & 500V also available) Case Material:
More informationNB 21 IEC SIZE : (.063) 0.2 (.008) 0.8 (.031) ±0.2 (.008) 0.8 (.031) ±0.2 (.008) 0.2 (.008) min 0.2 (.008) min
NC SMD hermistors NB 21 (Ni Barrier/100% Sn ermination) Chip thermistors are high quality and low cost devices especially developed for surface mounting applications. hey are widely used for temperature
More informationHP SERIES HIGH PERFORMANCE CAPACITORS
AMERICAN TECHNICAL CERAMICS HP SERIES HIGH PERFORMANCE CAPACITORS Low Cost HP Series High Performance Multilayer Ceramic Capacitors ISO 9001 REGISTERED COMPANY ATC 001-1103, Rev. A; 7/11 ATC HP 0402 SERIES
More information1 8 WK L_V_AUTO_V01 FEB
WK12L, WK20L, WK25L 1%, 5% Thick Film Power Chip Resistor Wide Termination RoHS compliant and Halogen free Size 0612, 1020, 1225 Automotive AEC Q200 Compliant ASTM B-809-95 Compliant *Contents in this
More informationFILTER D-SUB. connectors
FILTER -SUB connectors table of contents MIL-TL-24308...3 Layouts...3 -Subminiature onnectors...4 How to order...5 MIL-TL-83513...6 onnectors and Layouts...7 How to order...8 OMBO -SUB MINITURE... 9 High
More informationGasDischarge Tubes GTCX28-XXXM-R10 Series
GasDischarge Tubes Littelfuse Circuit Protection 8mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and
More informationApplications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T
Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications
More informationGas Discharge Tubes GTCX25-XXXM-R02 Series
Littelfuse Circuit Protection 5mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission
More informationSection 3: Introduction. Dipped Radial Capacitors. Foreword SOLID TANTALUM RESIN DIPPED SERIES TAP/TEP
ection 3: Introuction Forewor AVX offers a broa line of soli Tantalum capacitors in a wie range of sizes, styles, an ratings to meet any esign nees. This catalog combines into one source AVX s leae tantalum
More informationFeatures. Continuous ZA Series Units. ) 4 to 460 V DC Voltage Range (V M(DC) ) 5.5 to 615 V Transients: Peak Pulse Current (I TM
ZA Varistor Series RoHS Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems.
More informationApplications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T
MDS, Dual In-Line Low Profile, 50 630, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor is encapsulated in a self-extinguishing material, meeting the requirements of UL
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a
More informationLife Expectancy : Class A Class B Class C Class D 30,000hrs 10,000hrs 3,000hrs 1000hrs
4.4 Motor Run Capacitors : continuous operation ypical Applications : Motor Run Capacitor ideal for various motor applications in washing machine, air conditioner, electric water pump, power factor collection
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 31, 2016 V.14 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification October 27, 16 V.15 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free
More informationType AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
More informationSOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low ESR
SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low Ultra Low < 30 mω New E/7260 Case with < 18 mω Up to 5 Amps ripple current RoHS Compliant & Leadfree Termination (see www. kemet.com for
More informationGTCX35-XXXM-R05 Series
Littelfuse Circuit Protection 5mm 3Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission
More informationGeneral Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, VDC.
General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, 50 630 VDC Overview Dual in-line (DIL) metallized polyester (PET) film capacitor. Encapsulation
More informationSurface-Mounted Ceramic EMI Filter Capacitors
X2Y S Surface-Mounted Ceramic EMI Filter Capacitors Feb, 2008 Rev.14 1 DESCRIPTION Yageo s X2Y series is a breakthrough in the design of ceramic multilayer products for decoupling and filtering in an IPD
More informationSurface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
More informationFig. 1 Fig
NS Series - N hermistors for emperature Sensing Features: Electric insulation on lead wire Excellent bending resistance and easy handling due to suitable hardness of surface coating igh-accuracy of ±%
More informationHighest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES
CASE DIMENSIONS: millimeters (inches) Code H, K, L, O, S, T, X CASE 156 J XXXXX 156 = 15µF ID Code HO TO ORDER TCN L 157 FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800μF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
More informationHigh Voltage Thick Film Chip Resistor MCHVR Series
eatures Highly reliable multilayer electrode construction Higher component and equipment reliability xcellent performance at high voltage Reduced size of final equipment pplications Inverter Outdoor quipments
More informationSWITCH-MODE CERAMIC CAPACITORS
Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and
More informationNMJ Series 5.2kVDC Isolated 1W DC-DC Converters
www.murata-ps.com NMJ Series FEATURES UL60950 recognised Wide temperature performance at full 1 watt load, 40 to 85 Single and dual outputs SIP package style 5.2kVD isolation Hi Pot Test 3V, 5V & 12V input
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering) FEATURES Manufactured with non-magnetic materials Safety screened for magnetic properties C0G (NP0)
More informationHighest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES
FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode Benign failure mode under recommended use conditions Lower Undertab terminations layout: - High Volumetric Efficiency
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) ELECTRICAL SPECIFICATIONS NON-MAGNETIC C0G (NP0) GENERAL SPECIFICATION Note Electrical characteristics at
More informationSOLID TANTALUM CHIP CAPACITORS T496 SERIES Fail-Safe Fused
Built-in fuse protects against damaging short circuit failure mode Precision-molded, laser-marked case Symmetrical, compliant terminations Taped and reeled per EIA 481-1 geometry and footprints equivalent
More informationSolid Tantalum Chip Capacitors TANTAMOUNT, Commercial, Surface Mount
Solid Tantalum Chip Capacitors PERFORMANCE/ELECTRICAL CHARACTERISTICS Operating Temperature: - 55 C to + 85 C (To + 125 C with voltage derating) Note: Refer to Doc. 40088 Capacitance Range: 0.10 µf to
More informationMultilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
More informationFEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder
More informationCHIPSESD DEVICES BENEFITS APPLICATIONS FEATURES
CHIPSES EVICES Littelfuse s ChipSES family of Silicon ES devices, available in EIA-0201 and EIA-0402 sized rectangular SMT passive component packages, can help protect electronic circuits against damage
More informationHIGH VOLTAGE THICK FILM CHIP FIXED RESISTOR
HIGH VOLTGE THIK FILM HIP FIXED RESISTOR 3000V Max Operating voltage 3000V Stable electrical capability, high reliability Superior mechanical and frequency characteristics ROHS ompliant with RoHS directive
More informationDatasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: 763-1434 Product Details RS Pro SMD inductor offers an inductance of 4.7 nh
More informationWK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change
More informationINDEX. How to Order Chip Resistors Selection Guide... 2~ Chip Resistors Array : Convex Termination...
INDEX Subject Page How to Order.... 1 Chip Resistors Selection Guide... 2~3... 4... 5.... Chip Resistors Array : Convex ermination....... Chip Resistors Array : Concave ermination........... 11 Special
More informationTMJ Tantalum SMD S1gma TM Series Capacitors
The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely
More informationNov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-19100328 4/14/06 Added recommended PCB layout and plots. 6/2/06 Added Tape and Reel
More informationTANTALUM MOLDED / RADIAL T330/T340 SERIES - PRECISION MOLDED RADIAL LEAD POLAR TYPE
330/340 ERIE - PRECIION MOE RAIA EA POAR YPE 330 eries KEME 330 eries, polar-type, radial lead rectangular Precision Molded antalum (PM) capacitors are primarily designed for applications that demand full
More informationWF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10H_V01 Jan.2010 FEATURE 1. High reliability and stability
More informationLow TCR, 1mW Dual Rejustor Micro-Resistor MBD-472-AL
Low TCR, 1mW Dual Rejustor Micro-Resistor MBD-472-AL The Rejustor is a precision, electrically-adjustable resistor from Microbridge. The Rejustor can be adjusted to a precision of 0.1%, or better. The
More informationType AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
More informationRated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V
FEATURES Improved reliability 2x standard reduced by 25% to 0.0075 CV Robust against higher thermo-mechanical stresses during assembly process CV range: 0.10-680μF / 4-50V 6 case sizes available 130 low
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-13501505 RoHS ISSUED CHECKED CHECKED CHECKED APPROVED 12/14/09 kn 10/25/12 DS 11/15/12
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
More informationSurface Mount Aluminum Electrolytic Capacitors
CYLINDRICL VCHIP CONSTRUCTION FOR SURFCE MOUNTING VERY LOW IMPEDNCE WIDE TEMPERTURE RNGE (55 +5 O C) REDUCED SIZE DESIGNED FOR UTOMTIC MOUNTING ND REFLOW SOLDERING MEETS THE REQUIREMENTS OF ECQ200* *Contact
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
More informationMultilayer ceramic capacitor
Multilayer ceramic capacitor Series/Type: Chip Ordering code: B37921... Date: 2005-12-05 Content of inside pages of data sheet. Data will be automatically entered into headers and footers. Please fill
More informationFEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF RoHS ISSUED CHECKED CHECKED CHECKED APPROVED.
Page 1 of 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF-22500024 RoHS 12/7/09 Added Attenuation and graph 9/1/17 Added Recommended Solder Pattern ISSUED CHECKED CHECKED
More informationTHA and THAS, Thinpack, Aluminum Electrolytic Capacitors
THA and THAS, Thinpack, Aluminum Electrolytic Capacitors Highest Energy-Density Electrolytic in a Very Low-Profile Design Welcome to the THA and THAS Thinpack Capacitor Training Module from Cornell Dubilier.
More informationThick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Highly reliable multilayer electrode construction
More informationConfiguration. Specification: Capacitance Range. Insulation Resistance. Maximum Pulse Rise Time(V/μsec.): Shown As Following Table.
Metallized Polyester Film s (Radial Dipped) Configuration FEATURES Self healing characteristics. Miniature size, light in weight. High stability of temperature vs. Cap. and tanδ. High density thermosetting
More informationCB Series Tantalum Capacitors
Series Features: Lead-Free. Specially designed of general purpose. Highly reliable resin dipped type. xcellent frequency and temperature characteristics. Non-flammable epoxy resin. Specifications: Item
More informationCoil type EMI Filters
oil type MI Filters (Digital Noise Filters) Type: K 8 case size, 6 A rated current (KA) and A rated current (K) High SD suppression with varistor and included coils asily discernible part number written
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105
More informationWF12SR360JTL. Size Surge 5% chip resistors. Customer : Approval No : Issue Date : Customer Approval :
SPECIFICATION OF SURGE 5% CHIP RESISTOR Ver: 1 Page: 1 of 7 ROHS compliance WF12SR360JTL Surge 5% chip resistors Size 1206 Customer : Approval No : Issue Date : Customer Approval : SPECIFICATION OF SURGE
More informationSPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER CF ROHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER CF-14871365 ROHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
More informationCONDUCTIVE POLYMER CHIP CAPACITORS
FEATURES Polymer Cathode Technology Use Up to 80% of Rated Voltage (20% Derating) Low for part types > 10 Volts High Frequency Cap Retention Capacitance 15 to 1000µF (±20%) No-Ignition Failure Mode Voltage
More informationMULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED
MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED Multilayer ceramic capacitors are available in a variety of physical sizes and configurations, including leaded devices and surface mounted chips. Leaded
More informationFittings do not include lamps unless specifically stated. E.&.O.E. LED 07/12
Track Spotlights 42 Fittings do not include lamps unless specifically stated. E.&.O.E. LED 07/12 Track Spotlights XL-LED Performance Track Spotlight Kits 44 XL-LED Performance Track Spotlight 46 Track
More informationSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
More informationFEATURES APPLICATIONS. Audio Systems GPS Seat Controls Dashboard
FEATURES General purpose SMT chip tantalum series 6 case sizes available CV range: 0.22-680μF / 6.3-50V APPLICATIONS Audio Systems GPS Seat Controls Dashboard LEAD-FREE COMPATI- BLE COMPONENT MARKING A,
More informationMULTILAYER CERAMIC CHIP CAPACITORS
April 2018 Commercial grade, Soft termination (Low resistance type) CNC series CNC5 CNC6 3216 [1206 inch] 3225 [1210 inch] * Dimensions code: JIS[EIA] (2/6) REMINDERS FOR USING THESE PRODUCTS Before using
More informationJuly terminal Filters. For Large-current Power Line. YFF-HC Series [1206 inch]* Feed through filter. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 215 3-terminal Filters For Large-current Power Line YFF31HC 3216 [126 inch]* Feed through filter * Dimensions Code JIS[EIA] (1/4) 3-terminal Filters For Large-current Power
More informationSELECTION GUIDE. Nominal Input Order Code 1 Voltage. Output Voltage
www.murata-ps.com NTE Series FEATURES RoHS compliant Lead frame technology Single isolated output 1kVDC Isolation Efficiency up to 78% Power density 1.8W/cm 3 Wide temperature performance at full 1 Watt
More informationSoft Termination Capacitor ~ GCJ series ~
GENERAL DESCRIPTION Requirements especially enhanced mechanical strength from the automotive customers to us are increasing. It was noted that many components may be subject to severe flexing,vibration,and
More informationSurface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123
Surface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123 ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C, unless otherwise specified FEATURES Space-level reliability
More informationJune 26, 2006 DIELECTRIC CERAMIC DUPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION ITEM: DIELECTRIC CERAMIC DUPLEX FILTER PART NUMBER: CFDM
June 26, 2006 DIELECTRIC CERAMIC DUPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION ITEM: DIELECTRIC CERAMIC DUPLEX FILTER PART NUMBER: CFDM-0902094710 Application: GSM 900 Duplexer ISSUED CHECKED CHECKED
More informationFEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications
Low - Automotive Product Range FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.22-680μF / 6.3-50V 5 case sizes available Power supply applications APPLICATIONS Power Supply
More informationSOLID TANTALUM CHIP CAPACITORS T495 SERIES Low ESR, Surge Robust
SOLI TANTALUM CHIP CAPACITORS esigned for very low SR High ripple current capability High surge current capability % accelerated steady-state aging % Surge Current test Meets or xceeds IA Standard 535BAAC
More informationConductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on
More information