Resin Dipped, Solid Tantalum Capacitors

Section 3: Introduction. Dipped Radial Capacitors. Foreword SOLID TANTALUM RESIN DIPPED SERIES TAP/TEP

ection 3: Introuction Forewor AVX offers a broa line of soli Tantalum capacitors in a wie range of sizes, styles, an ratings to meet any esign nees. This catalog combines into one source AVX s leae tantalum

TANTALUM MOLDED / RADIAL T330/T340 SERIES - PRECISION MOLDED RADIAL LEAD POLAR TYPE

330/340 ERIE - PRECIION MOE RAIA EA POAR YPE 330 eries KEME 330 eries, polar-type, radial lead rectangular Precision Molded antalum (PM) capacitors are primarily designed for applications that demand full

Technical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF

www.niccomp.com/pcn Technical Support: tpmg@niccomp.com October 28 th 2016 SUB: EOL End of Life Notification Products impacted by this notice: NPC Series SMT Solid Polymer Aluminum Electrolytic Capacitors

Miniature Aluminum Electrolytic Ca pac i tors

ULTRA LOW IMPEDANCE, RADIAL LEADS, POLARIZED, ALUMINUM ELEC TRO LYT IC FEATURES VERY LOW IMPEDANCE LONG LIFE AT 105 C (1000 ~ 5000 hrs.) HIGH STABILITY AT LOW TEMPERATURE IDEALLY FOR SWITCHING POWER SUPPLIES

Current Sensing Chip Resistors

NC Series FEAURES HIGH OER SURFACE MOUNAE CASE SIZE AEC Q-200 QUAIFIED IDE RANGE OF RESISANCE VAUES (U O 500m) MEA SRI CONSRUCION RECISON OERANCE (±1%) REFO COMAIE RoHS Compliant includes all homogeneous

Surface Mount Aluminum Electrolytic Capacitors

FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW

Surface Mount Aluminum Electrolytic Capacitors

FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800μF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING

Surface Mount Aluminum Electrolytic Capacitors NACEW Series

FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage

Surface Mount Aluminum Electrolytic Capacitors

FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105

Current Sensing Chip Resistors

FEURES SURFCE MOUNE 0805, 1206, 2010 ND 2512 CSE SIZE O RESISNCE ME SRI CONSRUCION RECISON OERNCE (±1%) ED & REE CKGING FOR ESY ICK ND CE REFO COMIE SECIFICIONS ype EI Size Material (See Note on EMF Characteristics

Miniature Aluminum Electrolytic Capacitors

Miniaure Aluminum Elecrolyic Capaciors NRS Series RADIAL LEADS, OLARIZED, NE URTER REDUCED CASE SIZING, ROM NRA IDE TEMERATURE RANGE RoS EX TEND ED TEM ER A TURE Complian NRA NRS includes all homogeneous

Surface Mount Aluminum Electrolytic Capacitors

FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING

XKT. Metal Oxide Varistor FEATURES

FEATURES Operating Temperature Range: -40 ~+105 Body Diameters Range From 5D to 20D Wide Operating from 18V to 1800V Full compliance with RoHS and REH DIMENSION L: 16mm min SIZE D MAX H MAX d+/-0.05 E

Large Can Aluminum Electrolytic Capacitors

FEATURES LONG LIFE AT +105 C (2,000 ~ 3,000 HOURS) HIGH RIPPLE CURRENT HIGH VOLTAGE (UP TO 500VDC) SUITABLE FOR SWITCHING POWER SUPPLIES SPECIFICATIONS *See System for Details Operating Temperature Range

50 VDC 10 V 63 VDC 50 V. 1 x 10 4 M (mean value: 2 x 10 4 M ) Measuring time: 1 min. Test voltage: 1.6 U r, 2 sec. Maximum pulse rise time:

WIMA MKS 02 Metallize Polyester (PET) Capacitors in PCM 2.5 mm Special Features igh volume/capacitance ratio an reuce base PCM 2.5 mm Self-healing Accoring to RoS 2002/95/EC Typical Applications For general

WIMA FKM 2. Film and Foil Capacitors with Mixed Dielectric for Pulse Applications in PCM 5 mm. Typical Applications. Construction.

WIMA FKM 2 Film an Foil Capacitors with Mixe ielectric for Pulse Applications in PCM 5 mm Special Features Pulse uty construction Constant capacitance value versus temperature (similar to the obsolete

Multilayer Ceramic Chip Capacitors

RoHS Compliant FEATURES Includes all homogeneous materials STANDARD EIA 0805 & 1206 PACKAGING *See Part Number System for Details EACH COMPONENT CONTAINS 4 ISOLATED CERAMIC CAPACITORS AVAILABLE IN A WIDE

Capacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:

olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts, ouble-sie Metallization an Self-ealing Internal Series Connection for ighest Current Carrying Capability 1

WIMA FKP 4. Typical Applications. Construction. Packing. Mechanical Tests

WIMA K 4 olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts an Self-ealing, Internal Series Connection for Increase Current Carrying Capability CM 1 mm to 37.

WIMA FKS 2. Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm. Typical Applications. Construction. Packing.

WIMA FKS 2 Polyester (PET) Film an Foil Capacitors for Pulse Applications in PCM 5 mm Special Features Pulse uty construction Accoring to RoS 2002/95/EC Typical Applications For general C-applications

Miniature Aluminum Electrolytic Capacitors

Miniaure Aluminum Elecrolyic Capaciors 84 RADIAL LEADS, OLARIZED, STANDARD CASE SIZING NRSA (oday s sandard) NRSS (reduced sizes) CARACTERISTICS *See ar Number Sysem for Deails Raed Volage Range 6.3 ~

Country Authority Specification Symbol. Mounting Recommendation

WIMA MP 3-X2 Metallize Paper (MP) RFI-Capacitors Class X2 PCM 10 mm to 27.5 mm Special Features Particularly high reliability against active an passive flammability Excellent self-healing as well as high

Surface Mount Aluminum Electrolytic Capacitors NACZF Series

FETURES YLINRIL LELESS TYPE FOR SURFE MOUNTING HIGH PITNE VLUES (UP TO 6800µF) LO IMPENE/HIGH RIPPLE URRENT T 100KHz 12.5mm x 17mm ~ 18mm x 22mm SE SIZES IE TERMINTION STYLE FOR HIGH VIRTION.PPLITIONS

Leaded Metal Oxide Varistors

FEATURES GENERAL UROSE TRANSIENT VOLTAGE ROTECTION MEETS UL1449 REV. 3 (File # E357747) FOR SURGE ROTECTIVE DEVICES CURRENT ITHSTANDING (1x U TO 6,500A) TEMERATURE RANGE -40 C ~ +85 C VARISTOR VOLTAGE

Tantalum Chip Capacitors

FEATURES EXPANDED VALUE RANGE & REDUCED CASE SIZES MOLDED CONSTRUCTION FOR HIGH SOLDERING HEAT RESISTANCE ELEVEN CASE SIZES (J, P, A2, A, B2, B, C2, C, V, D AND E) BOTH FLOW AND REFLOW SOLDERING APPLICABLE

Surface Mount Aluminum Electrolytic Capacitors

FETURES YLINRIL V-HIP ONSTRUTION LONG LIFE (7,000 ~ 10,000 HOURS) IE TEMPERTURE RNGE (-25 ~ +105 ) ESIGNE FOR REFLO SOLERING RoHS ompliant includes all homogeneous materials *See Part Number System for

WIMA FKS 3. Polyester (PET) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.

WIMA FKS 3 Polyester (PET) Film an Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse uty construction Accoring to RoS 2002/95/EC Typical Applications For general C-applications

XTH-K-L-M-V Vishay Wet Tantalum Capacitors Cylindrical Body, Hermetically Sealed

XT-K-L-M-V Wet Tantalum Capacitors FEATURES igh temperature igh voltage igh capacitance Withstands high frequency vibration to 2000 z ermetically sealed Long shelf life SCC rawings 04032 & 04033 PERFORMANCE

Surface Mount Aluminum Electrolytic Capacitors

CYLINDRICL VCHIP CONSTRUCTION FOR SURFCE MOUNTING VERY LOW IMPEDNCE WIDE TEMPERTURE RNGE (55 +5 O C) REDUCED SIZE DESIGNED FOR UTOMTIC MOUNTING ND REFLOW SOLDERING MEETS THE REQUIREMENTS OF ECQ200* *Contact

WIMA MKP-X2. Continuation. General Data

WIMA MKP-X2 Metallize Polypropylene (PP) RFI-Capacitors Class X2 PCM 7.5 mm to 27.5 mm Special Features Reliable self-healing igh egree of interference suppression ue to goo attenuation an low ESR Accoring

Surface Mount Aluminum Electrolytic Capacitors

FETURES YLINRIL V-HIP ONSTRUTION FOR SURFE MOUNTING SUIT FOR HIGH TEMPERTURE REFLOW SOLERING (UP TO 260 ) 2,000 HOUR LO LIFE @ +85 ) ESIGNE FOR UTOMTI MOUNTING N REFLOW SOLERING HRTERISTIS Rated Voltage

W2A (0508) Capacitor Arrays. 4 pcs 0402 Capacitors = 1 pc 0508 Array. 2.1 (0.083) AREA = 3.95mm2 (0.156 in2)

apacitor rray apacitor rray (I) NFI OF UING IOR RRY V capacitor arrays offer designers the opportunity to lower placement costs, increase assembly line output through lower component count per board and

CB Series Tantalum Capacitors

Series Features: Lead-Free. Specially designed of general purpose. Highly reliable resin dipped type. xcellent frequency and temperature characteristics. Non-flammable epoxy resin. Specifications: Item

Metal Oxide Varistor:TVR-D Series

Features. RoHS compliant 2. Boy size Ф7~ Ф 20mm 3. ie operating voltage range:5vac ~ 680Vac 4. High surge current rating up to 3K 5. High energy rating up to 720 Joule 6. Raial lea resin coate 7. Excellent

VAR Series Zinc Oxide Varistor

FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High

Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C

General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:

AUMINUM EECTROYTIC CAPACITORS RAIA EA TYPE PART NUMBER SYSTEM ( Ⅰ ) Series Rated Voltage Capacitance Tolerance ead orming Type ead ength Case imension Special Request (1) (2) (3) (4) (5) (6) (7) (8) (1)

Multilayer Acrylic Polymer Film Capacitors

FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC

U37F SERIES Engineering Bulletin Mar 2013

EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 5,000 Hours Lifetime at 85 Up to 150,000 Hours Useful Life he series is a general purpose, screw mount U37

U37X SERIES Engineering Bulletin Mar 2013

EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 15,000 Hours Lifetime at 85 Up to 175,000 Hours Useful Life he series is the longest life version of the

Surface Mount Aluminum Electrolytic Capacitors

FEATURES YLINDRIAL V-HIP ONSTRUTION FOR SURFAE MOUNTING AVAILALE WITH ANTI-VIRATION WIDE TERMINATIONS VERY LOW IMPEDANE & HIGH RIPPLE URRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105 ) SUITALE

1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC

Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical

Radial Leads/SkyCap /AR Series

Radial Leads/SkyCap /AR Series AUTOMOTIVE GENERAL INFORMATION AVX AR Series Conformally Coated Radial Leaded MLC Temperature Coefficients: C0G (NP0), X7R, X8R 3000, 2000, 1000, 200, 100, 50 Volts Case

EMI Suppression Capacitors

Construction Plastic case (UL 94 V-0) Epoxy resin sealing, flame-retardant Axial leads, insulating sleeve (type B8119 Self-healing Smallest possible dimensions Terminals Parallel wire leads, tinned Two

WIMA MP 3-Y2. Metallized Paper (MP) RFI-Capacitors Class Y2 PCM 10 mm and 15 mm. Typical Applications. Construction. Packing.

WIMA MP 3-Y2 Metallized Paper (MP) RFI-Capacitors Class Y2 PCM 10 mm and 15 mm Special Features Particularly high reliability against active and passive flammability Excellent self-healing as well as high

Aluminum Electrolytic Capacitors, Power High Ripple for Traction, Screw Terminals

Aluminum Electrolytic Capacitors, Power igh Ripple for raction, Screw erminals FEAURES ong useful life: > 10 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm ow ESR Polarized aluminum electrolytic

Life Expectancy : Class A Class B Class C Class D 30,000hrs 10,000hrs 3,000hrs 1000hrs

4.4 Motor Run Capacitors : continuous operation ypical Applications : Motor Run Capacitor ideal for various motor applications in washing machine, air conditioner, electric water pump, power factor collection

tan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0

Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant

TSV. Suntan ZINC OXIDE VARISTOR. Operating Temperature Range: -40 ~+85. L:16mm min

Operating Temperature Range: -40 ~+85 DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c max D05 8 11 0.5 5±0.8 2.5 D07 10 12.5 0.5 5±0.8 2.5 D10 13.5 16 0.7 7.5±0.8 2.5 D14 17.5 20 0.7 7.5±0.8 2.5 D20

GENERAL DESCRIPTION. AVX Capacitor Array - W2A41A***K S21 Magnitude Frequency (GHz)

apacitor rray apacitor rray (I) NFIS OF USING IOR RRYS V capacitor arrays offer designers the opportunity to lower placement costs, increase assembly line output through lower component count per board

U37L SERIES Engineering Bulletin Mar 2013

EIE Large an crew erminals General Purpose U37 Grade High ipple 350 to 500VD atings oh ompliant 10,000 Hours Lifetime at 85 Up to 175,000 Hours Useful Life he series is a longer life version of the U37

Country Authority Specification. Germany VDE IEC USA/Canada UL UL CAN/CSA-E Mechanical Tests

WIMA MP 3-Y2 / 3R-Y2 Metallized Paper (MP) RFI-Capacitors Class Y2 in PCM 10 mm to 27.5 mm. Capacitances from 1000 pf to 0.1 mf. Rated Voltages 250 VAC and 300 VAC. Special Features Particularly high reliability

Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES

FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode Benign failure mode under recommended use conditions Lower Undertab terminations layout: - High Volumetric Efficiency

Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life

Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple

Radial Aluminium Electrolytic Capacitors 105 C

Radial Aluminium Electrolytic Capacitors 105 C Standard, miniaturized, Endurance 1.000h to 2.500h at 105 C Rated voltage range: 6,3V to 100V, Rated capacitance range: 0,47µF to 12.000µF range: Ø 5,5 x

Low ESR and High Frequency Radial Electrolytic Capacitor. TZE Series. Features. Applications. Dimensions (in mm)

Low ESR and High Frequency Radial Electrolytic Capacitor Low ESR and High Frequency Radial Electrolytic Capacitor Features Radial leads, cylindrical aluminum case Low impedance and high frequency High

FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)

FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder

Aluminum Capacitors, Power General Purpose Screw Terminals

Aluminum Capacitors, Power General Purpose Screw erminals FEAURES Useful life: 5000 h at +85 C Efficient design Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic capacitors,

Wet Tantalum Capacitors Cylindrical Body, Hermetically Sealed

Wet Tantalum Capacitors Cylindrical Body, ermetically Sealed PERFORMANCE CARACTERISTICS Operating Temperature: to +175 C with proper derating Voltage Range: 8 V C to 630 V C at 85 C Reverse Voltage: none

WIMA FKP 02. Typical Applications. Construction. Packing. Mechanical Tests

WIMA FKP 02 Polypropylene (PP) Film/Foil Capacitors for Pulse Applications in PCM 2.5 mm. Capacitances from 100 pf to 0.01 mf. Rated Voltages from 63 VC to 400 VC. Special Features Pulse duty construction

Surface Mount Aluminum Electrolytic Capacitors

FETURES YLINDRIL V-HIP ONSTRUTION FOR SURFE MOUNTING REDUED SIZE VILLE WITH NTI-VIRTION TERMINTIONS (8 & 10mm DIMETER) SUIT FOR HIGH TEMPERTURE REFLOW SOLDERING (UP TO 260 ) 2,000 HOUR LOD LIFE @ +105

Aluminum Electrolytic Capacitor JNK

FEATES Extended Lifetime at High ripple current High Professional Switch Mode Power Supplies Frequency Converters SPECIFICATIONS Items Performance Characteristics Operating Temperature Range ( ) -40 ~

-40 to C 6.3 to 50 V.DC 22 to 6800 µ F ±20 % (120Hz/+20 C) I < 0.01 CV (µa) after 2 minutes application of rated working voltage at +20 C

Radial Type Series: FM Type :A n Features Low impedance(40 to 70% less than FC Series) Endurance : 2000 to 7000 hours at +105 C Country of Origin Japan Malaysia China n s Category temp. range Rated W.V.

WIMA FKS 2. Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm. Typical Applications. Construction. Mechanical Tests.

WIMA FKS 2 Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm Special Features Pulse duty construction According to RoHS 2011/65/EU Typical Applications For general C-applications

WIMA FKP 2. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM 5 mm. Typical Applications. Construction.

WIMA FKP 2 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM mm Special Features Pulse duty construction Close tolerances up to ±2. % (±1 % on request) Very low dissipation factor

WIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.

WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus

300 VAC* W H L PCM** Part number 1000 pf MKY22W11003D MKY22W11503D MKY22W12203D00

WIMA MKP-Y2 Metallized Polypropylene (PP) RFI-Capacitors Class Y2 in PCM 10 mm to 37.5 mm. Capacitances from 1000 pf to 1.0 mf. Rated Voltage 300 VAC. Special Features Reliable self-healing High degree

TANCAP TECHNOLOGY CO., LTD.

TB SERIES FEATURES - Capacitance : 0.1uF to 330uF - Current Test on Each Size - Capacitance Tolerance: ±5%(K), ±10%(K), ±20%(M) - Voltage : 4V DC to 50V DC CASE DIMENSIONS AND MARKINGS Forming C : 2. Forming

FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)

FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder

MKV AC capacitors. General AC applications. Ordering code: B25832 Date: September 2005

MKV C capacitors General C applications Orering coe: Date: September 2005 EPCOS G 2005. Reprouction, publication an issemination of this ata sheet, enclosures hereto an the information containe therein

Case. Without Insulating With Insulatiing E Size Size (0.016)

The TWA series is an axial leaded wet electrolytic tantalum capacitor with a unique cathode system that promotes very high CV (Capacitance/Voltage) per cc in traditional MIL-PRF-39006 case sizes. The series

Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors

2000 our Long Life, luminum Elecrolyic MLLORY S Type S is a raial leae aluminum elecrolyic capacior wi a +5 ºC, 2000 our long life raing. Te S is a ig reliabiliy prouc an is ieal for ig qualiy applicaions

Lower Voltage Ceramic Disc Capacitors 2 kvdc to 7.5 kvdc

Lower Voltage eramic isc apacitors 2 kv to 7.5 kv Fig. 1 FEAURES max. 1.250" min. (32 mm) inned opper Leads LO Low losses High capacitance in small sizes High stability Radial leads 0.125" (3.2 mm) max.

NTC Accurate Thermistors

NC Accurate hermistors NP30 - NJ 28 NI 24 NK 20 High precision resistance and an outstanding ability to reproduce the sensibility index B, make these ranges of products the types of thermistors ideal for

55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A

Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:

SMPS Capacitors Chip Assemblies

MP Capacitors CH/CV - Radial, Dual-in-ine, 4 Terminal/MT J & Ranges The CH/CV range exhibits low ER/E making them well suited for high frequency applications. ith its PME technology, the range exhibits

WIMA FKP 2. Typical Applications. Construction. Mechanical Tests. Packing

WIMA FKP 2 Polypropylene (PP) Film/Foil Capacitors for Pulse Applications in PCM mm. Capacitances from 33 pf to 0.033 mf. Rated Voltages from 63 VC to 1000 VC. Special Features Pulse duty construction

WIMA FKS 2. Typical Applications. Construction. Mechanical Tests. Packing

WIMA FKS 2 Polyester (PET) Film/Foil Capacitors for Pulse Applications in PCM 5 mm. Capacitances from 1000 pf to 0.047 mf. Rated Voltages from 63 VC to 630 VC. Special Features Pulse duty construction

Ceramic disc capacitors (kinked leads) Class 2, low loss (0.2% max.) 500 V; 1 kv; 2 kv; 3 kv

FEATURES High reliability Low losses High capacitance in small size Kinked leads. APPLICATIONS In electronic circuits where low losses and high capacitance per volume are essential, for example: SMPS HF

0.01 mf MKX2AW21002C MKX2AW21003F MKX2AW21502C MKX2AW21503F00

WIMA MKP-X2 Metallized Polypropylene (PP) RFI-Capacitors Class X2 in PCM 7.5 mm to 37.5 mm. Capacitances from 1000 pf to 10 mf. Rated Voltage 305 VAC. Special Features Reliable self-healing High degree

100 khz 4 x x MHz 10 x Mechanical Tests

WIMA FKP 2 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM mm Special Features Pulse duty construction Close tolerances up to ±2. % (±1 % on request) Very low dissipation factor

WIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.

WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus

METALLIZED POLYESTER FILM CAPACITOR

Dimensions Characteristic graph 4-39 METALLIZED POLYESTER ILM CAPACITOR Type MMC eatures Smaller version of MM type. Very small size, achieved by our unique manufacturing method. ighly reliable because

WIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.

WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus

Capacitance range: mf to 25 mf Rated voltages: 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC

WIMA Snubber MKP Snubber MKP Capacitors for Pulse Applications with ouble-sided Metallized Electrodes, Schoopage Contacts and Internal Series Connection Special Features Pulse duty construction Self-healing

Resin-Coated, Radial-Leaded Solid Tantalum Capacitors

FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*

AD-2D NEW Drilling Solid carbide 2xD

l A-2 NEW rilling oli carbie 2x irst choice in quality an performance Carbie rill with EgiAs coating Up to 2x or general purpose steels an cast iron 112 sizes P P P P K K H H H C: 0,2% C: 0,25-0,4% C:

Standard and Low Profile Tantalum Microchip Capacitors. STANDARD CASE DIMENSIONS: millimeters (inches)

FEATURES The world s smallest surface mount tantalum capacitor CV range: 0.10-150μF / 2-25V 11 case sizes available, standard and low profile APPLICATIONS Hearing Aids, Non-life support medical, Long life

Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type

Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long

Film Capacitors. Metallized Polyester Film Capacitors (MKT) Date: August 2004

Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32591... B32594 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto

Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.

Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term

Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES

CASE DIMENSIONS: millimeters (inches) Code H, K, L, O, S, T, X CASE 156 J XXXXX 156 = 15µF ID Code HO TO ORDER TCN L 157 FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode

Applications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T

MDS, Dual In-Line Low Profile, 50 630, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor is encapsulated in a self-extinguishing material, meeting the requirements of UL

TMJ Tantalum SMD S1gma TM Series Capacitors

The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely

Applications F 611 J F 104 M 050 C. First two digits represent significant figures. Third digit specifies number of zeros.

General Purpose, Pulse and DC Transient Suppression F611 & F612 Series Metallized Polyester Film, 5 37.5 mm Lead Spacing, 50 1,000 VDC Overview The F611 and F612 Series is constructed of metallized winded

MF-R Series - PTC Resettable Fuses

*RoHS OMPLINT & **HLOGN FR R0 780T Features n Radial Leaded evices n ured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements n RoHS compliant* and alogen free** n gency recognition:

WIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.

WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus

1 x 10 4 M (mean value: 5 x 10 4 M ) Measuring time: 1 min. Dissipation factors at +20) C: tan d U 250 VDC 100 V

IMA SM-N Metallize olyethylene-naphthalate (N) SM ilm Capacitors with Box ncapsulation Special eatures Size coes 1812, 2220, 2824, 4030, 5040 an 6054 with N an encapsulate Operating temperature up to 125

Solid-Electrolyte TANTALEX Capacitors, Military MIL-PRF-39003/01 Qualified, Style CSR13

olid-electrolyte TANTALEX apacitors, ilitary IL-F-39003/01 Qualified, tyle 13 FEATUE Hermetically sealed etal cased Axial lead Weibull failure rates,,, Exponential failure rates,,, Tape and reel available

Capacitance. Mechanical Tests

WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2011/65/EU Typical Applications For general C-applications e.g.