Current Sensing Chip Resistors
|
|
|
- Merryl Bradley
- 5 years ago
- Views:
Transcription
1 NC Series FEAURES HIGH OER SURFACE MOUNAE CASE SIZE AEC Q-200 QUAIFIED IDE RANGE OF RESISANCE VAUES (U O 500m) MEA SRI CONSRUCION RECISON OERANCE (±1%) REFO COMAIE RoHS Compliant includes all homogeneous materials See art Number System for Details SECIFICAIONS ype EIA Size Material (See Note on EMF Characteristics elow) ower Rating at 70 C 1 (C) (Code) emperature Coefficient (ppm/ C, +25 C ~ +125 C) Range* Operating emperature Range ( C) NC25...NF Ni-Cu Ni-Cr-Al-Si 1.5 (D) 2 (E) 3 (G) 1 (C) 2 (E) 1 (C) ±1% (F) ±2% (G) ±5% (J) ±50ppm 3m ~ 100m 120m ~ 500m -55 C ~ +170 C NC25...F Mn-Cu 1.5 (D) 2 (E) ±50ppm 1m ~ 60m 3 (G) *Contact NIC regarding availability of values not shown AR NUMER SYSEM NC 25 * * R005 R N Q Y F RoHS compliant HERMA EMF CHARACERISICS: Mn-Cu Construction: hermal EMF = -1μV/ C Ni-Cu Construction: hermal EMF = -40μV/ C Ni-Cr-Al-Si Construction: hermal EMF = +1μV/ C Q = AEC Q-200 Qualified Material: A = Ni-Cr-A-lSi, N = Ni-Cu, lank = Mn-Cu ackaging: R = ape & Reel Code: See Values ables Code: J = 5%, G = 2%, F = 1% ower Rating Code: 1 = C, 1.5 = D, 2 = E, 3 = G Case Size Code: 25 = Series "Y" denotes suitable for automotive equipment, sourced to special production and inspection at S certified production site *Insert appropriate power rating and tolerance codes, Contact NIC regarding availability of other values RAED CURREN: I = / R EXAME: art Number NC25E_R001RNF = 2 R = (1milli-ohm) I = /R = 2 / = 44.7A 1 NIC COMONENS COR SECIFICAIONS ARE SUJEC O CHANGE
2 NC Series ENVIRONMENA CHARACERISICS Item Specification est Method Reference Standard emperature Coefficient IEC ithin specified value +25 C ~ +125 C of JIS-C oad ife <±1% 1,000 hours at rated power, +70 C, 1.5 hours ON, 0.5 IEC hours OFF JIS-C Short ime Overload <±0.5% 5 x rated power for 5 seconds IEC JIS-C Moisture IEC a <±1% +85 C, 85% RH, 1000 hours (no load) JIS-C a emperature Cycling <±0.5% -55 C & +125 C, 1000 cycles IEC minutes at each temperature JIS-C to Soldering Heat <±0.5% +260 C ± 5 C for 10 sec. ±1 sec.,wo cycles IEC (20 sec. ±1 sec. for size) JIS-C Solderability At least 95% coverage IEC C ± 5 C, 2 sec. ± 0.5sec. of electrode surface JIS-C High emperature Exposure <±1% +125 C for 1,000 hours IEC JIS-C ow emperature Storage <±0.5% -55 C for 45 minutes IEC JIS-C Substrate ending <±0.5% ending within 2mm IEC JIS-C Insulation >100M 100VDC for 1 minute IEC JIS-C Mechanical Shock <±0.5% 100g's, 6ms, half sine pulses N/A Vibration <±0.5% 5g's for 20 minutes, 12 cycles, 10~2000Hz N/A Flammability No flaming drips allowed Electric test not required U-94 V-0 or V-1 NC25 ( CASE SIZE 1, 1.5 and 2) AVAIAE VAUES (Ni-Cu) art Number ower Ratings CR NC25 R003RNF NC25 R003RNQYF 3 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R004RNF NC25 R004RNQYF 4 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R010RNF NC25 R010RNQYF 10 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R011RNF NC25 R011RNQYF 11 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R012RNF NC25 R012RNQYF 12 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R015RNF NC25 R015RNQYF 15 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R018RNF NC25 R018RNQYF 18 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R020RNF NC25 R020RNQYF 20 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R022RNF NC25 R022RNQYF 22 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R025RNF NC25 R025RNQYF 25 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R030RNF NC25 R030RNQYF 30 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R033RNF NC25 R033RNQYF 33 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R039RNF NC25 R039RNQYF 39 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R040RNF NC25 R040RNQYF 40 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R047RNF NC25 R047RNQYF 47 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm 2 NIC COMONENS COR SECIFICAIONS ARE SUJEC O CHANGE
3 NC Series art Number ower Ratings CR NC25 R050RNF NC25 R050RNQYF 50 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R057RNF NC25 R057RNQYF 57 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R060RNF NC25 R060RNQYF 60 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R068RNF NC25 R068RNQYF 68 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R070RNF NC25 R070RNQYF 70 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R075RNF NC25 R075RNQYF 75 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R080RNF NC25 R080RNQYF 80 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R085RNF NC25 R085RNQYF 85 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R090RNF NC25 R090RNQYF 90 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R100RNF NC25 R100RNQYF (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 ( CASE SIZE 1, 1.5, 2 and 3) AVAIAE VAUES (Mn-Cu) art Number ower Ratings CR NC25 R001RF NC25 R001RQYF 1 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R0011RF NC25 R0011RQYF (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R002RF NC25 R002RQYF (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R003RF NC25 R003RQYF (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R005RF NC25 R005RQYF (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R007RF NC25 R007RQYF (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R008RF NC25 R008RQYF (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R010RF NC25 R010RQYF 10 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R015RF NC25 R015RQYF 15 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R020RF NC25 R020RQYF 20 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R027RF NC25 R027RQYF 27 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R030RF NC25 R030RQYF 30 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R033RF NC25 R033RQYF 33 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R050RF NC25 R050RQYF 50 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm NC25 R060RF NC25 R060RQYF 60 1 (C), 1.5 (D), 2 (E), 3 (G) ±1% (F), ±2% (G), ±5% (J) ±50ppm 3 NIC COMONENS COR SECIFICAIONS ARE SUJEC O CHANGE
4 NC Series NC25 (1, 1.5 and 2, CASE SIZE) AVAIAE VAUES (Ni-Cr-Al-Si) art Number NC25 R120RAF NC25 R120RAQYF NC25 R130RAF NC25 R130RAQYF NC25 R140RAF NC25 R140RAQYF NC25 R150RAF NC25 R150RAQYF NC25 R180RAF NC25 R180RAQYF NC25 R200RAF NC25 R200RAQYF NC25 R220RAF NC25 R220RAQYF NC25 R240RAF NC25 R240RAQYF NC25 R270RAF NC25 R270RAQYF NC25 R280RAF NC25 R280RAQYF NC25 R300RAF NC25 R300RAQYF NC25 R400RAF NC25 R400RAQYF NC25 R500RAF NC25 R500RAQYF ower Ratings CR (C), 1.5 (D), 2 (E) ±1% (F), ±2% (G), ±5% (J) ±50ppm (C), 1.5 (D), 2 (E) ±1% (F), ±2% (G), ±5% (J) ±50ppm (C), 1.5 (D), 2 (E) ±1% (F), ±2% (G), ±5% (J) ±50ppm (C), 1.5 (D), 2 (E) ±1% (F), ±2% (G), ±5% (J) ±50ppm (C), 1.5 (D), 2 (E) ±1% (F), ±2% (G), ±5% (J) ±50ppm (C), 1.5 (D), 2 (E) ±1% (F), ±2% (G), ±5% (J) ±50ppm (C), 1.5 (D), 2 (E) ±1% (F), ±2% (G), ±5% (J) ±50ppm (C), 1.5 (D), 2 (E) ±1% (F), ±2% (G), ±5% (J) ±50ppm (C), 1.5 (D), 2 (E) ±1% (F), ±2% (G), ±5% (J) ±50ppm (C), 1.5 (D), 2 (E) ±1% (F), ±2% (G), ±5% (J) ±50ppm (C), 1.5 (D), 2 (E) ±1% (F), ±2% (G), ±5% (J) ±50ppm (C), 1.5 (D), 2 (E) ±1% (F), ±2% (G), ±5% (J) ±50ppm (C), 1.5 (D), 2 (E) ±1% (F), ±2% (G), ±5% (J) ±50ppm ower Derating Curve: For operation above 70 C, power rating must be derated according to the following chart: ercentage of ower Rating 100% 80% 60% 40% 20% emperature C 4 NIC COMONENS COR SECIFICAIONS ARE SUJEC O CHANGE
5 NC Series Case Size R < 4m 2.0 ± ± ± ± 0.2 R > 4m 0.9 ± 0.2 DIMENSIONS AND AR MARKING Ni-Cu Marking for Values < 4m Mn-Cu Ni-Cu/Fe-Al-Cr Marking for Values > 4m Mn-Cu R004 R004 R020 R020 RECOMMENDED AND AERN DIM. (mm) Case Size A C 1m ~ 4m m ~ 500m RECOMMENDED REFO SODERING EMERAURE ROFIE eak emperature 260 C 230 C, 40 sec. max. 10 sec. 150 Sensing race C C ~ 180 C 120 Sec. 0 A EMOSSED ASIC AE DIMENSIONS (mm) Case Size A K 1 E F D 0 D 1 Quantity per Reel 3.6 ± ± ± ± ± ± ± / min ± 0.2 4,000 E D 0 D 1 F K A 1 5 NIC COMONENS COR SECIFICAIONS ARE SUJEC O CHANGE
Current Sensing Chip Resistors
FEURES SURFCE MOUNE 0805, 1206, 2010 ND 2512 CSE SIZE O RESISNCE ME SRI CONSRUCION RECISON OERNCE (±1%) ED & REE CKGING FOR ESY ICK ND CE REFO COMIE SECIFICIONS ype EI Size Material (See Note on EMF Characteristics
Automotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
CRS-A Series High Power Anti-Surge Resistor
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*
Technical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF
www.niccomp.com/pcn Technical Support: tpmg@niccomp.com October 28 th 2016 SUB: EOL End of Life Notification Products impacted by this notice: NPC Series SMT Solid Polymer Aluminum Electrolytic Capacitors
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512 ( Automotive & Anti-sulfuration ) Page 1 of 7 SR20-25X_V04 Sep.-2011 FEATURE 1. High reliability and stability ±1% 2. Sulfuration resistant 1000ppm
Thick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Highly reliable multilayer electrode construction
Datasheet RS Pro RS Series Thick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063W ±100ppm/ C RS Stock No:
Datasheet RS Pro RS Series hick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063 ±100ppm/ C RS Stock No: 716-8721 Product Details RS Pro 0402 thick film surface mount resistor with ±1% tolerance, provides
Resin Dipped, Solid Tantalum Capacitors
Resin ippe, oli antalum Capacitors NM eries FEAURE FUIIZE BE ROCE NE REUCE IZE FAME REARAN COAING O EAKAGE CURREN AN IMEANCE EXCEIONA EMERAURE ABIIY ECIFICAION Capacitance Range 0.1µF ~ 330µF Ro Compliant
WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive)
WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive) *Contents in this sheet are subject to change without prior notice. Page
Data Sheet. Customer: Automotive Grade Current Sensing Chip Resistor CS..A Series Size: 0402/0603/0805/1206/1210/2010/2512/1225/3720/7520
Data Sheet Customer: Product: Size: 0402/0603/0805/1206/1210/2010/2512/1225/3720/7520 Issued Date: Edition: 12-Jan-18 REV.6 VIKING ECH CORPORION VIKING ECH CORPORION KOHSIUNG RNCH UXI MEC CO., LD. No.70
(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Token Electronics Industry Co., Ltd. Version: July 12, Web:
Version: July 12, 2018 (LRF) 4-Terminal Connection Kelvin Current Sensing Chips Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd.,
SF-0603S Series - Slow Blow Surface Mount Fuses
SinglFuse SF-0603S Series Features n Slow blow thin film chip fuse for overcurrent protection n 608 (EI 0603) miniature footprint n Surface mount packaging for automated assembly n UL listed (UL 248-4)
WW25M 1%, 5% Metal Plate Low Ohm Power Chip Resistors. Size 2512 (6432) 1W Current Sensing Type RoHS Exemption free and Halogen free
WW25M 1%, 5% Metal Plate Low Ohm Power Chip Resistors Size 2512 (6432) 1W Current Sensing Type RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page
(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Electronics Tech. Direct Electronics Industry Co., Ltd. Version: July 17, 2018
Version: July 17, 2018 Electronics Tech. (LRF) 4-Terminal Connection Kelvin Current Sensing Chips Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F,
NTC Thermistor for Automotive: TSM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. Operating temperature range: -50 ~ +150 3. Superior stability in high-temperature and high-humidity environment 4. RoHS & Halogen Free (HF) compliant
Temperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance
.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature
FPS series. (AEC-Q200) Triple Rated Power / Anti-Surge Thick-film Lead Free Chip Resistors
1. Features.....2 2. Applications....... 2 3. Dimension and construction....2 4. Power Derating Curve.....3 5. Rating.3 6. Part Number.. 4 7. Marking / Soldering..4 8. Reliability Performance.6 9. Packing...9
PTC Thermistor for Automotive:TPM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics Part Number Code
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
Data Sheet. Customer: Automotive Grade Chip Resistor CR..A Series Size: 0201/0402/0603/0805/1206/1210/2010/2512
Data Sheet Customer: Product: CR.. Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: Edition: 12-Jan-18 REV.8 VIKING ECH CORPORION VIKING ECH CORPORION KOHSIUNG RNCH UXI MEC CO., LD. No.70
Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration )
SR12, SR10, SR08, SR06, SR04, General purpose chip resistors Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration ) *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_SR_V03
Metal Oxide Varistor:TVR-M Series
Features. RoHS and Halogen-free compliant 2. Body size: Ф5 ~ Ф20mm 3. ide continuous voltage range: 30Vac ~ 465Vac 4. Operating temperature range: -40 C ~ +25 C Storage temperature range: -40 C ~ +50 C
SPECIFICATION FOR APPROVAL
信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. No.220-1, Sec. 2, Nanshan Rd., Lujhu, Taoyuan 33860, Taiwan, R.O.C. SPECIFICATION FOR APPROVAL DATE: CUSTOMER: PART NAME: Metal Strip Type Halogen Free Sensing
Data Sheet. Customer: Automotive Grade Anti-Sulfurated Chip Resistor AS..A Series Size: 0201/0402/0603/0805/1206/1210/2010/2512
Data Sheet Customer: Product: S.. Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: Edition: 12-Jan-18 REV.6 VIKING ECH CORPORION VIKING ECH CORPORION KOHSIUNG RNCH UXI MEC CO., LD. No.70
PTC Thermistor for Automotive:TPM-C Series
SMD PTC Thermistor for Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics
SPECIFICATION FOR APPROVAL
Prosperity Dielectrics Co., Ltd. No.220-1, Sec. 2, Nanshan Rd., Lujhu, Taoyuan 33860, Taiwan, R.O.C. Tel. 886-3-3224471 Fax 886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: PART NAME: Thick-Film
High Power Thin Film Chip Resistors
FETURES IMPROVE POWER RTING (HIGHER THN NTR SERIES) PRECISE TOLERNCE N TEMPERTURE COEFFICIENT EI STNR CSE SIZES (0603 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLERLE (Pb FREE TERMINTION
High Voltage Thick Film Chip Resistor MCHVR Series
eatures Highly reliable multilayer electrode construction Higher component and equipment reliability xcellent performance at high voltage Reduced size of final equipment pplications Inverter Outdoor quipments
Thin Film Anti-Sulfurated Chip Resistor (TAS Series)
(TAS Series) Features - Special materials, design, and processing for high sulfur applications - Tolerances as low as 0.05% and s as low as 10 ppm. - Test proven immunity to humidity, moisture, and sulfur
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432)
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432) Metal Current Sensing Type *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25N_V14 Jul - 2015
INDEX. How to Order Chip Resistors Selection Guide... 2~ Chip Resistors Array : Convex Termination...
INDEX Subject Page How to Order.... 1 Chip Resistors Selection Guide... 2~3... 4... 5.... Chip Resistors Array : Convex ermination....... Chip Resistors Array : Concave ermination........... 11 Special
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size
WW12W ±1%, ±5% Size W. Thick Film High Power Low Ohm Chip Resistors. Approval sheet
±1%, ±5% Thick Film High Power Low Ohm Chip Resistors Size 1206 1W *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC 1W TC200_V01 DEC - 2015 FEATURE 1. High power rating
WW12M, WW12N ±1%, ±5%, 1/2W, 1W Ultra low ohmic power chip resistors
WW12M, WW12N ±1%, ±5%, 1/2W, 1W Ultra low ohmic power chip resistors Size 1206 (3216) Sensing Type *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW12MN_V05 Jul.2010
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105
SPECIFICATION SHEET. ±1%, ±5%, Convex Type General purpose chip resistors array
SPECIFICATION SHEET CNA24, CNA34 ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) All data in this sheet are subject to change, modify
1 8 WK L_V_AUTO_V01 FEB
WK12L, WK20L, WK25L 1%, 5% Thick Film Power Chip Resistor Wide Termination RoHS compliant and Halogen free Size 0612, 1020, 1225 Automotive AEC Q200 Compliant ASTM B-809-95 Compliant *Contents in this
MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array
MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) Page 1 of 8 MA04/ 06_V03 Apr.2010 FEATURE 1. High reliability and stability
NB 21 IEC SIZE : (.063) 0.2 (.008) 0.8 (.031) ±0.2 (.008) 0.8 (.031) ±0.2 (.008) 0.2 (.008) min 0.2 (.008) min
NC SMD hermistors NB 21 (Ni Barrier/100% Sn ermination) Chip thermistors are high quality and low cost devices especially developed for surface mounting applications. hey are widely used for temperature
Metal Oxide Varistor:TVR-M Series
Features. RoHS and Halogen-free compliant 2. Body size: Ф5 ~ Ф20mm 3. Wide continuous voltage range: 30Vac ~ 465 Vac 4. Operating temperature range: -40 C ~ +25 C 5. Storage temperature range: -40 C ~
Metal Alloy Low-Resistance Resistor Specifications
Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following
WK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change
Data Sheet. Customer: Automotive Grade Chip Resistor CR..A Series Size: 0201/0402/0603/0805/1206/1210/2010/2512
Data Sheet Customer: Product: CR.. Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: Edition: 15-Jul-16 REV.7 VIKING ECH CORPORION 光頡科技股份有限公司 No.70 Guangfu N. Rd., Hukou ownship, Hsinchu
Data Sheet. Customer: Automotive Grade Anti-Sulfurated Chip Resistor AS..A Series Size: 0201/0402/0603/0805/1206/1210/2010/2512
Data Sheet Customer: Product: S.. Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: Edition: 15-Jul-16 REV.5 VIKING ECH CORPORION 光頡科技股份有限公司 No.70 Guangfu N. Rd., Hukou ownship, Hsinchu
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
DATA SHEET CURRENT SENSOR - LOW TCR PT series 5%, 2%, 1% sizes 0402/0603/0805/1206/2010/2512
DATA SHEET CURRENT SENSOR - LOW TCR PT series 5%, 2%, 1% sizes 0402/0603/0805/1206/2010/2512 RoHS compliant & Halogen free Product specification December 30, 2015 V.1 Product specification 2 SCOPE This
WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1206, 0805, 0603, ( Automotive )
WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors Size 1206, 0805, 0603, 0402 ( Automotive ) Page 1 of 9 WR_J(AUTO)_ V03 Sep.2010 FEATURE 1. Automotive grade AEC Q-200 compliant 2. 100% CCD
NTC Accurate Thermistors
NC Accurate hermistors NP30 - NJ 28 NI 24 NK 20 High precision resistance and an outstanding ability to reproduce the sensibility index B, make these ranges of products the types of thermistors ideal for
No. Test Requirement Test Condition Test Reference. 10 cycles
*RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL 248-14 listed n RoHS compliant* and
WR10, WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1210, 1206, 0805, 0603, 0402
WR10, WR12, WR08, WR06, WR04, General purpose chip resistors Size 1210, 1206, 0805, 0603, 0402 ( Automotive & Anti-sulfuration ) *Contents in this sheet are subject to change without prior notice. Page
1 7 ASC_WF06A_V01 NOV
WF06A 1 ~ 1Mohm ±5%, ±1% High Power Chip Resistors Size 0603 1/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF06A_V01 NOV - 2015 FEATURE 1. Small size and light
Automotive and Anti-Sulfuration Chip Resistor 0603
The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the
Thick Film Chip Resistors
FEATURES EIA STANDARD SIZING 01005(1/32), 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES
WF12SR360JTL. Size Surge 5% chip resistors. Customer : Approval No : Issue Date : Customer Approval :
SPECIFICATION OF SURGE 5% CHIP RESISTOR Ver: 1 Page: 1 of 7 ROHS compliance WF12SR360JTL Surge 5% chip resistors Size 1206 Customer : Approval No : Issue Date : Customer Approval : SPECIFICATION OF SURGE
High Power Low Ohm Chip Resistors. Size W, W, /2W
WW25P, WW20P, WW12P ±1%, ±5% 47mΩ~976mΩ High Power Low Ohm Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25P-20P-12P_V08
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Anti-Sulfur SMD Array Chip Resistor STA Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
WR02X(W) ±5%, ±1% RoHS compliant and Lead content 100ppm General purpose chip resistors Size 0201
WR02X(W) ±5%, ±1% RoHS compliant and Lead content 100ppm General purpose chip resistors Size 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WR02X_TR_V02 Jul -
WF06P 5% High power chip resistors Size 0603, 1/8watt
SPECIFICATION OF HIGH POWER CHIP RESISTOR Ver: 1 Page: 1 of 7 ROHS compliance WF06P 5% High power chip resistors Size 0603, 1/8watt Customer : Approval No : Issue Date : Customer Approval : SPECIFICATION
Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage
627, 628 Series.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor etworks RoHS Compliant ELECTRICAL Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18-20-25X(W) Ver.13 Oct.-2010 FEATURE 1. High power
Thick Film Chip Resistors
FEATURES EIA STANDARD SIZING 01005(1/32), 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES
74x Series Chip Resistor Arrays
Features Low Cost Thick Film Technology Leadless Surface Mount Construction Concave Convex Terminations Solder Coated Nickel Barrier Pads Isolated and Bussed Circuit Configurations Improved TCR Tracking
SolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 1206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating,
Surface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
SolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
Radial Leads/SkyCap /AR Series
Radial Leads/SkyCap /AR Series AUTOMOTIVE GENERAL INFORMATION AVX AR Series Conformally Coated Radial Leaded MLC Temperature Coefficients: C0G (NP0), X7R, X8R 3000, 2000, 1000, 200, 100, 50 Volts Case
Current Sensing Resistor Metal Foil Type >SMF Series
Page: 1 of 6 General Chip size from 0603 to Resistance value from 3mΩ to 200mΩ Low thermal EMF. Low TCR. Lead free, RoHS compliant for global applications and halogen free Application Switching model power
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier
Tantalum Chip Capacitors
FEATURES EXPANDED VALUE RANGE & REDUCED CASE SIZES MOLDED CONSTRUCTION FOR HIGH SOLDERING HEAT RESISTANCE ELEVEN CASE SIZES (J, P, A2, A, B2, B, C2, C, V, D AND E) BOTH FLOW AND REFLOW SOLDERING APPLICABLE
S J
1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V
Thin Film Chip Resistor (ARG Series)
Construction D1 L (ARG Series) Features -Advanced thin film technology -SMD Type designed for automatic insertion -Wide resistance range 1ohm ~ 2.49Mega ohm Applications -Medical Equipment -Testing / Measurement
Miniature Aluminum Electrolytic Capacitors
Miniaure Aluminum Elecrolyic Capaciors NRS Series RADIAL LEADS, OLARIZED, NE URTER REDUCED CASE SIZING, ROM NRA IDE TEMERATURE RANGE RoS EX TEND ED TEM ER A TURE Complian NRA NRS includes all homogeneous
WW25X ±1%, ±5% Low ohmic power chip resistors Size 2512
WW25X ±1%, ±5% Low ohmic power chip resistors Size 2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WW25X Version 06 Jul.-2004 FEATURE 1. High power rating and compact size 2.
Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & ANTI-SULFURATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RMNW K HTS-1 /3 Date: 217. 4. 21 Data sheet : ANTI-SULFURATION RMNW1,16,2,32,35 AEC-Q2 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock conditions Temperature: +5 C +35 C Relative
Type HOLCO Series. Axial Leaded Precision Resistors. Key Features. Characteristics - Electrical. General Data
Key Features Ultra Precision - Down To 0.05% Matched Sets Available To 2ppm/ C High Pulse Withstand Low Reactance Low TCR - Down To 5ppm/ C Up To 1 Watt At 70 C Released To CECC 40101 004, 030 And 804
Molded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M
*RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
AEC-Q200 Chip Resistor QR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier
SFI Electronics Technology
1. Part Number Identification SFI 2220 SA 240 250 J Company Logo Inner Code Size 1206~3220 SA SHA Series 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V 151 = 15 10 1 V=150V
WR18, WR20, WR25 ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18, WR20, WR25 ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18, WR20, WR25 Version 3 Oct.-2004 FEATURE 1. High power rating
Thick Film Arrray Chip Resistor RP164PJxxx Series
Thick Film Arrray Chip Resistor Array Chip Resistor 4 Element 0603 Convex Types Features Convex Termination Less board space than individual chip resistors Cost reduction efficiency by eliminating mounter
WK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice.
WW25W, WW20W, WW10W, WW12W, WW08W, WW06W
WW25W, WW20W, WW10W, WW12W, WW08W, WW06W ±1%, ±5% Thick Film Power Low Ohm Chip Resistors RoHS Exemption free and Lead free Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10H_V01 Jan.2010 FEATURE 1. High reliability and stability
No. P-KAB-001 DATE PRODUCTS DATA SHEET MICRO FUSE. Type KAB. UL/cUL approved File No.E17021 RoHS COMPLIANT LEAD FREE
No. P-KAB-00 DATE 007-0 PRODUCTS DATA SHEET UL/cUL approved File No.E70 RoHS COMPLIANT MICRO FUSE Type KAB LEAD FREE Size 608/0 Type KAB micro fuse is designed for circuit protection against excessive
SinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics
*RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed
Features 60R010X & 60R017X. P d typ. (W) I max (A) V max (Vdc)
60R Series RoHS * Description The 60R Series radial leaded device is designed to provide overcurrent protection for ( 60V) applications where space is not a concern and resettable protection is preferred.
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier
*See Part Number System for Details SPECIFICATIONS. Case Dimensions Type Case Size P 2 NFCC04
FETURES RECTNGULR PCKGE ITH METL STRIP FUSE ELEMENT EI SIZES 42, 63, 85 ND 126 CURRENT RTINGS FROM.2 ~ 5. MPS SFETY STNDRD PPROVL (UL and c-ul File Number E32168) Pb-FREE COMPTILE ITH FLO ND REFLO SOLDERING
Metal Oxide Varistor:TVM-B Series
Features 1. RoHS compliant 2. High surge suppress capability 3. EIA size 0402 ~ 2220 4. Operating voltage: 5.5 ~ 85 Vdc 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer ceramic construction
1.5KE SERIES Taiwan Semiconductor
Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 1500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from 0 volt
MMP - Metal Film MELF
Specifications Per IEC 60115-1 D2 EN140401-803 B L D1 Features SMD enabled structure Excellent solderability termination Products meet RoHS requirements and do not contain substances of very high concern
Application. Features
Anti-Sulfur SMD Array Chip Resistor STA Series Application Entertainment: Stereo, TV tuners, Tape recorder Appliance: Air conditioner, Refrigerator Computer & relative products: Main board, PDA Communication
High Power Chip Resistors Size W, W, /2W
WF25P, WF20P, WF12P ±1%, ±5% 0Ω,1Ω~1MΩ High Power Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WF25P, WF20P, WF12P, Ver.8 Jul.2010
SinglFuse SF-1206HIxxxM Series Features
E SinglFuse SF-1206HIxxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High inrush current withstand fuse n UL 248-14 listed n RoHS compliant* and halogen
Leaded Metal Oxide Varistors
FEATURES GENERAL UROSE TRANSIENT VOLTAGE ROTECTION MEETS UL1449 REV. 3 (File # E357747) FOR SURGE ROTECTIVE DEVICES CURRENT ITHSTANDING (1x U TO 6,500A) TEMERATURE RANGE -40 C ~ +85 C VARISTOR VOLTAGE
Metal Oxide Varistor:TVR-D Series
Features. RoHS compliant 2. Halogen-free series are available 3. Body size: Ф7mm ~ Ф 20mm 4. Wide operating voltage range: 5Vac ~ 680Vac 5. High surge current rating up to 3KA 6. High energy rating up