Thick Film Chip Resistors
|
|
|
- Chloe Sabina King
- 5 years ago
- Views:
Transcription
1 FEATURES EIA STANDARD SIZING 01005(1/32), 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM QUALITY AND HIGH RELIABILITY DOUBLE GLASS OVERCOAT ASSURES STRONG MECHANICAL..CONTRUCTION AND LONG LIFE, NICKEL BARRIER PREVENTS LEACHING BOTH FLO SOLDER AND REFLO SOLDERING ARE APPLICABLE ZERO OHM (JUMPER) CHIP AND TRIMMABLE TYPE ARE AVAILABLE *4 Type EIA Size Power Rating at 70 C Max.*1 orking Voltage Max.*2 Overload Voltage Resistance Tolerance (Code) Temperature Coefficient (ppm/ C) NE Case Sizes Resistance Range (Ω) Resistance Value ±1% (F) ± ~ 91 E-24,E-96 ±1% (F) ± ~ 1.62M E-24,E-96 NRC /32 (0.031) 15V 30V ±5% (J) +600/ ~ 9.1 E-24 ±5% (J) ± ~ 91 E-24 ±5% (J) ± ~ 10M E-24 ±1% (F) +600/ ~ 9.96 E-24,E-96 ±1% (F) ± ~ 91 E-24,E-96 ±1% (F) ± ~ 1M E-24,E-96 NRC /20 (0.05) 25V 50V ±1% (F) ± M ~ 10M E-24,E-96 ±5% (J) +600/ ~ 9.1 E-24 ±5% (J) E-24 ± ~ 10M ±10% (K) E-12 ±1% (F) +500/ ~ 9.96 E-24,E-96 ±1% (F) ± ~ 1M E-24,E-96 NRC /16 (0.063) 50V 100V ±1% (F) ± M ~ 10M E-24,E-96 ±1% (F) ± ~ 9.96 E-24,E-96 ±1% (F) ± ~ 1M E-24,E-96 NRC /10 (0.10) 50V 100V ±1% (F) ± ~ 32.4 & 1.1M ~ 10M *3 E-24,E-96 ±1% (F) ± ~ 9.96 E-24,E-96 ±1% (F) ± ~ 1M E-24,E-96 NRC /8 (0.125) 150V 300V ±1% (F) ± ~ 32.4 & 1.1M ~ 10M *3 E-24,E-96 ±1% (F) ± ~ 9.96 E-24,E-96 ±1% (F) ± ~ 1M E-24,E-96 NRC /4 (0.250) 200V 400V ±1% (F) ± ~ 32.4 & 1.1M ~ 10M *3 E-24,E-96 ±1% (F) ±100 E-24,E ~ 1M NRC /3 (0.33) 200V 400V ±5% (J) ±200 E-24 NRC /4 (0.75) 200V 400V ±1% (F) ±100 E-24,E ~ 1M ±250 E-24 ±5% (J) ± ~ 9.1 & 1.1M ~ 10M *3 E-24 ± ~ 1M ±1% (F) ± ~ 9.76 *3 E-24,E-96 NRC V 500V ± ~ 1.96 *3 ±5% (J) ± ~ 1M ± ~ 9.1 *3 E-24 NRC01ZO Rated Current 0.5A (0.05Ω max. DC Resistance) NRC02ZO 0201 Rated Current 0.5A (0.05Ω max. DC Resistance) NRC04ZO 0402 Rated Current 1.0A (0.05Ω max. DC Resistance) NRC06ZO 0603 Rated Current 1.0A (0.05Ω max. DC Resistance) NRC10ZO 0805 Zero Ohm Jumper Rated Current 2.0A (0.05Ω max. DC Resistance) NRC12ZO 1206 Rated Current 2.0A (0.05Ω max. DC Resistance) NRC25ZO 1210 Rated Current 2.0A (0.05Ω max. DC Resistance) NRC50ZO 2010 Rated Current 2.0A (0.05Ω max. DC Resistance) NRC100ZO 2512 Rated Current 2.0A (0.05Ω max. DC Resistance) Operating Temperature Range ( C) -55 ~ ~ ~
2 Note *1 - Maximum allowable continuous orking Voltage for all resistors is the lower of the two values: Maximum orking Voltage as specifi ed above (or) Power rating (atts) x Resistance (Ohms) Note *2 - Maximum allowable Overload voltage is two times the Maximum orking Voltage (see Note *1 above). Note *3 - Made to order. Contact NIC for leadtime. Note *4 - Please contact NIC for availability of laser trimmable versions of 0805 and 1206 sizes parts. Note *5 - Please note, NIC s NRC series products are capable of meeting the following specifi cations: JIS-C 5202, EIAJ RC-2690, EIA575, EIA PDP-100, MIL-R-5542D and UL94V-0. Power Derating Curve: For operation above 70 C, power rating must be derated according to the following chart: 100 RATE (%) /0603/0805/1206/1210/2010/ o C DIMENSIONS (mm) Type Power EIA Rating Size L H T t NRC01 1/ ± ± ± ± ± 0.03 NRC02 1/ ± ± ± ± ± 0.05 NRC04 1/ / / ± ± ± 0.1 NRC06 1/ ± ± ± ± ± 0.15 NRC10 1/ ± ± ± ± ± 0.15 NRC12 1/ ± ± ± ± ± 0.15 NRC25 1/ ± ± ± ± ± 0.25 NRC50 3/ ± ± ± ± ± 0.30 NRC ± ± ± ± ± 0.30 NRC01ZO JUMPER Same as NRC01 NRC02ZO JUMPER 0201 Same as NRC02 NRC04ZO JUMPER 0402 Same as NRC04 NRC06ZO JUMPER 0603 Same as NRC06 NRC10ZO JUMPER 0805 Same as NRC10 NRC12ZO JUMPER 1206 Same as NRC12 NRC25ZO JUMPER 1210 Same as NRC25 NRC50ZO JUMPER 2010 Same as NRC50 NRC100ZO JUMPER 2512 Same as NRC100 CONSTRUCTION NRC01 (01005) 2
3 CONSTRUCTION NRC02 ~ NRC12 NRC25 ~ NRC100 PART NUMBER SYSTEM (E-24 VALUES) NRC12 J 103 TR 10 F RoHS compliant Optional 10,000 piece reel Tape & Reel Packaging Resistance Code: First 2 fi gures are sig nifi cant, 3rd digit is the multiplier, R indicates a decimal point. Tolerance Code: J=5% (Std), G=2% (Optional) Series and Size Examples of Resistance Code: 4R7 = 4.7 ohms 103 = 10K ohms 100 = 10 ohms 104 = 100K ohms 101 = 100 ohms 105 = 1 meg ohms 102 = 1K ohms 106 = 10meg ohms PART NUMBER SYSTEM (E-96 VALUES) NRC10 F 1003 TR 10 F RoHS compliant Optional 10,000 piece reel Tape & Reel Packaging Resistance Code: First 3 fi gures are sig nifi cant, 4th digit is the multiplier, R indicates a decimal point. Tolerance Code: F=1% (Std) Series and Size Examples of Resistance Code: 10R0 = 10 ohms 47R5 = 47.5 ohms 1004 = 1meg ohms 1050 = 105 ohms 1000 = 100 ohms 1501 = 1.5K ohms 1001 = 1K ohms 1052 = 10.5K ohms 1002 = 10K ohms 1153 = 115K ohms 1003 = 100K ohms 1214 = 1.21meg ohms Marking (No marking on 0201 and 0402 size). 1. For E-12 & E-24 Series (±1%=F, ±2% = G, ±5% = J, (STD) Tolerance In 0603, 0805, 1206, 1210, 2010 and 2512 sizes: 3 DIGIT SYSTEM - First two digits are signifi cant and third digit is multiplier, R indicates decimal on values under 10 ohms. Examples: R10 =.10 ohms 1R0 = 1.0 ohms 102 = 1k ohms 470 = 47 ohms 103 = 10k ohms 101 = 100 ohms 104 = 100k ohms 105 = 1 megohms 2. For E-96 Series (±1%-F Tolerance) in 0805, 1206 and 1210 sizes: 4 DIGIT SYSTEM - First 3 digits are signifi cant and fourth digit is multiplier, R indicates decimal on values under 100 ohms. Examples: 0R10 =.10 ohms 1R00 = 1.0 ohms 10R0 = 10 ohms 1003 = 100 kohms 1000 = 100 ohms 1004 = 1 megohms 1001 = 1k ohms 1052 = 10.5k ohms 1002 = 10k ohms 2213 = 221k ohms 3. For E-96 Series (±1% -F Tolerance) in 0603 size 3 DIGIT SYSTEM (Due to space restrictions) 3
4 STANDARD E-12, E-24, E-96 VALUES AND % TOLERANCE RESISTANCE CODES Note: % resistor values that are exclusive to E-12 or E-24 (ex. 12K) are marked with the three character 5% tolerance code E-12 E-24 E-96 Value Value Value Code Value Code Value Code Value Code MULTIPLIER CODE Code A B,b C D,d E F G H X Y Z Multiplier CODING FORMULA XX Multiplier Code Resistance Code TAPING SPECIFICATIONS (1) Availability X Example: 10.2kΩ = 102 x 10 2 Ω = 02C 02 C 33.2 Ω = 332 x 10-1 = 51X 51 X MARKING EXAMPLES 10Ω = 01X 7.5k Ω = 85B or 85b 150k Ω = 18D or 18d 1 MegΩ = 01E % E-12/E-24 Values 160Ω = KΩ = MΩ = 825 Type Power EIA Carrier Tape Qty per 10" Qty per 7" Reel Rating Size Fig. Material idth (mm) Reel NRC01 1/ A Paper 8 20,000 N/A NRC02 1/ A Paper 8 10,000 N/A NRC04 1/ A Paper 8 10,000 N/A NRC06 1/ A Paper 8 5,000 10,000 NRC10 1/ A Paper 8 5,000 10,000 NRC12 1/ A Paper 8 5, NRC25 1/ B Plastic 12 4,000 N/A NRC04ZO Jumper 0402 A Paper 8 10,000 N/A NRC06ZO Jumper 0603 A Paper 8 5,000 10,000 NRC10ZO Jumper 0805 A Paper 8 5,000 10,000 NRC12ZO Jumper 1206 A Paper 8 5, NRC25ZO Jumper 1210 B Plastic 12 4,000 N/A 4
5 (2) PAPER TAPE DIMENSIONS (mm) FIG. A Type EIA Size A B D E F P o P 3 T 1 T 2 NRC01* ± ± ± ± max ± 0.03 NRC02* ± ± ± 0.1 N/A 2.0 ± max. 0.5 max. NRC04* ± ± ± NRC06* ± ± ± 0.1 ± 0.05 ± 0.1 ± max. 1.0 max. NRC10* ± ±0.2 N/A 4.0 ± 0.05 ± 0.05 NRC12* ± ±0.2 * Same for JUMPER (ZO) types. T2 P 0 P 3 D E Cover tape F B T1 A (3) EMBOSSED PLASTIC TAPE SPECIFICATION FIG. B. Type EIA Size A B D E F P 0 Qty per 7" Reel NRC25* ± ± 0.2 4,000 NRC50* ± ± ± ± ± ± ± ± 0.1 4,000 NRC100* ± ± 0.1 4,000 * Same for JUMPER (ZO) types. 0.2 ±0.05 P 0 D E Cover tape F B A 1.1 Max. (4) REEL SPECIFICATIONS FIG. C. 2.0 ± ± ± ± ,80 or 100 ±2 178 or 254 ±2 1. Leader tape : Approximately 250 m/m (160mm for 0201 case size)leader shall be provided at each end of the tape. 2. Accumulative tolerance of feeding hole and chip pocket shall not exceed 0.2mm over 10 pitches. Type EIA Size L (mm) NRC01* ± 0.3 NRC02* ±1.5 NRC04* ±1.5 NRC06* ±1.5 NRC10* ±1.5 NRC12* ±1.5 NRC ±1.5 NRC ±1.5 NRC100* ±1.5 * Same for JUMPER (ZO) types. L 5
6 PAPER CARRIER DIMENSIONS (mm) Type EIA Size A B D E F P o T Quantity/Reel NRC ± ± / ± ± ± ± ± ± ±0.2 30,000 pieces T P 0 D E Cover tape F B A REEL DIMENSIONS (mm) 9.0 ± ± ± ± ±1.0 6
Thick Film Chip Resistors
FEATURES EIA STANDARD SIZING 01005(1/32), 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES
Automotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
Temperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance
.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature
Metal Film MELF Resistors
FEATURES SURFACE MOUNT IN SIZES 0102 (0805), 0204 (1406) AND 0207 (2410) AVAILABLE IN PRECISION TOLERANCE AND TC (TO ±0.1% TOL. AND ±10PPM TC) ALL SIZES ARE AVAILABLE IN TAPE/REEL FOR AUTOMATIC MOUNTING
Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage
627, 628 Series.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor etworks RoHS Compliant ELECTRICAL Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature
High Power Thin Film Chip Resistors
FETURES IMPROVE POWER RTING (HIGHER THN NTR SERIES) PRECISE TOLERNCE N TEMPERTURE COEFFICIENT EI STNR CSE SIZES (0603 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLERLE (Pb FREE TERMINTION
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
Thin Film Chip Resistor (ARG Series)
Construction D1 L (ARG Series) Features -Advanced thin film technology -SMD Type designed for automatic insertion -Wide resistance range 1ohm ~ 2.49Mega ohm Applications -Medical Equipment -Testing / Measurement
Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & ANTI-SULFURATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RMNW K HTS-1 /3 Date: 217. 4. 21 Data sheet : ANTI-SULFURATION RMNW1,16,2,32,35 AEC-Q2 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock conditions Temperature: +5 C +35 C Relative
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512 ( Automotive & Anti-sulfuration ) Page 1 of 7 SR20-25X_V04 Sep.-2011 FEATURE 1. High reliability and stability ±1% 2. Sulfuration resistant 1000ppm
Thin Film Anti-Sulfurated Chip Resistor (TAS Series)
(TAS Series) Features - Special materials, design, and processing for high sulfur applications - Tolerances as low as 0.05% and s as low as 10 ppm. - Test proven immunity to humidity, moisture, and sulfur
WF06P 5% High power chip resistors Size 0603, 1/8watt
SPECIFICATION OF HIGH POWER CHIP RESISTOR Ver: 1 Page: 1 of 7 ROHS compliance WF06P 5% High power chip resistors Size 0603, 1/8watt Customer : Approval No : Issue Date : Customer Approval : SPECIFICATION
MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array
MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) Page 1 of 8 MA04/ 06_V03 Apr.2010 FEATURE 1. High reliability and stability
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier
Datasheet RS Pro RS Series Thick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063W ±100ppm/ C RS Stock No:
Datasheet RS Pro RS Series hick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063 ±100ppm/ C RS Stock No: 716-8721 Product Details RS Pro 0402 thick film surface mount resistor with ±1% tolerance, provides
DATA SHEET CURRENT SENSOR - LOW TCR PT series 5%, 2%, 1% sizes 0402/0603/0805/1206/2010/2512
DATA SHEET CURRENT SENSOR - LOW TCR PT series 5%, 2%, 1% sizes 0402/0603/0805/1206/2010/2512 RoHS compliant & Halogen free Product specification December 30, 2015 V.1 Product specification 2 SCOPE This
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432)
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432) Metal Current Sensing Type *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25N_V14 Jul - 2015
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18-20-25X(W) Ver.13 Oct.-2010 FEATURE 1. High power
1 7 ASC_WF06A_V01 NOV
WF06A 1 ~ 1Mohm ±5%, ±1% High Power Chip Resistors Size 0603 1/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF06A_V01 NOV - 2015 FEATURE 1. Small size and light
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800μF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier
MC 5% Series. Construction. Power Rating and Dimension. Features: Page <1> 07/04/12 V1.1. Dimension. Width (W) ± Series. Height (H) ±0.
Construction Power Rating and Dimension Series Length (L) ±0.1 Width (W) ±0.15-0.1 Dimension Height (H) ±0.05 Length (L1) ±0.1 Length (L2) ±0.1 MC 0603 1.6 ±0.1 0.8 0.45 0.3 0.3 MC 0805 2 ±0.15 1.25 0.4
WR18, WR20, WR25 ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18, WR20, WR25 ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18, WR20, WR25 Version 3 Oct.-2004 FEATURE 1. High power rating
WR12X / WR08X / WR06X ±1%, ±5% General purpose chip resistors Size 1206 / 0805 / 0603
WR12X / WR08X / WR06X ±1%, ±5% General purpose chip resistors Size 1206 / 0805 / 0603 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WR12X / WR08X / WR06X Version 17 Jul.-2004 FEATURE
WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1206, 0805, 0603, ( Automotive )
WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors Size 1206, 0805, 0603, 0402 ( Automotive ) Page 1 of 9 WR_J(AUTO)_ V03 Sep.2010 FEATURE 1. Automotive grade AEC Q-200 compliant 2. 100% CCD
Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration )
SR12, SR10, SR08, SR06, SR04, General purpose chip resistors Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration ) *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_SR_V03
WR02X(W) ±5%, ±1% RoHS compliant and Lead content 100ppm General purpose chip resistors Size 0201
WR02X(W) ±5%, ±1% RoHS compliant and Lead content 100ppm General purpose chip resistors Size 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WR02X_TR_V02 Jul -
Application. Features
Thick Film Chip Resistor CR Series Application Entertainment: Stereo, TV tuners, Tape recorder Appliance: Air conditioner, Refrigerator Computer & relative products: Main board, PDA Communication equipment:
WR10, WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1210, 1206, 0805, 0603, 0402
WR10, WR12, WR08, WR06, WR04, General purpose chip resistors Size 1210, 1206, 0805, 0603, 0402 ( Automotive & Anti-sulfuration ) *Contents in this sheet are subject to change without prior notice. Page
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size
WW12W ±1%, ±5% Size W. Thick Film High Power Low Ohm Chip Resistors. Approval sheet
±1%, ±5% Thick Film High Power Low Ohm Chip Resistors Size 1206 1W *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC 1W TC200_V01 DEC - 2015 FEATURE 1. High power rating
High Power Chip Resistors Size W, W, /2W
WF25P, WF20P, WF12P ±1%, ±5% 0Ω,1Ω~1MΩ High Power Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WF25P, WF20P, WF12P, Ver.8 Jul.2010
WF08P, WF06P. High Power Chip Resistors Size /4W ; /8W. Customer : Approval No : Issue Date : Customer Approval :
WF08P, WF06P ±1%, ±5% 0Ω, 1Ω~1MΩ High Power Chip Resistors Size 0805 1/4W ; 0603 1/8W Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WF08P;WF06P Version 04 Jul.-2009 FEATURE 1. Small
Thick Film Arrray Chip Resistor RP164PJxxx Series
Thick Film Arrray Chip Resistor Array Chip Resistor 4 Element 0603 Convex Types Features Convex Termination Less board space than individual chip resistors Cost reduction efficiency by eliminating mounter
WW12M, WW12N ±1%, ±5%, 1/2W, 1W Ultra low ohmic power chip resistors
WW12M, WW12N ±1%, ±5%, 1/2W, 1W Ultra low ohmic power chip resistors Size 1206 (3216) Sensing Type *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW12MN_V05 Jul.2010
WA04, WA06 ±1%, ±5%, Convex Type & Concave Type General purpose chip resistors array
WA04, WA06 ±1%, ±5%, Convex Type & Concave Type General purpose chip resistors array Size 0402x2 (4p2R) Size 0402x4, 0603x4 (8p4R) Size 0602x8 (16p8R) *Contents in this sheet are subject to change without
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
SPECIFICATION SHEET. ±1%, ±5%, Convex Type General purpose chip resistors array
SPECIFICATION SHEET CNA24, CNA34 ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) All data in this sheet are subject to change, modify
Multilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
Surface Mount Thick Film Resistor MCWR Series
Description The lead free resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a lead free resistive paste that is
74x Series Chip Resistor Arrays
Features Low Cost Thick Film Technology Leadless Surface Mount Construction Concave Convex Terminations Solder Coated Nickel Barrier Pads Isolated and Bussed Circuit Configurations Improved TCR Tracking
1 8 WK L_V_AUTO_V01 FEB
WK12L, WK20L, WK25L 1%, 5% Thick Film Power Chip Resistor Wide Termination RoHS compliant and Halogen free Size 0612, 1020, 1225 Automotive AEC Q200 Compliant ASTM B-809-95 Compliant *Contents in this
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
AEC-Q200 Chip Resistor QR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier
WW25W, WW20W, WW10W, WW12W, WW08W, WW06W
WW25W, WW20W, WW10W, WW12W, WW08W, WW06W ±1%, ±5% Thick Film Power Low Ohm Chip Resistors RoHS Exemption free and Lead free Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to
Molded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
WR10X ±1%, ±5% General purpose chip resistors Size 1210
WR10X ±1%, ±5% General purpose chip resistors Size 1210 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR10X Version 02 Jun.-2005 FEATURE 1. High reliability and stability 2. Reduced
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Anti-Sulfur SMD chip resistor ST Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
MMP - Metal Film MELF
Specifications Per IEC 60115-1 D2 EN140401-803 B L D1 Features SMD enabled structure Excellent solderability termination Products meet RoHS requirements and do not contain substances of very high concern
WA04T ±5%, ±1% Concave Type General purpose chip resistors array
WA04T ±5%, ±1% Concave Type General purpose chip resistors array Size 0402x4 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WA04T_Concave_V10 Oct.2010 FEATURE 1. Small
WA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4
WA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WA04X Version 15 Sept.-2004 FEATURE 1. Small size and light
Automotive and Anti-Sulfuration Chip Resistor 0603
The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the
Multilayer Ceramic Chip Capacitors
RoHS Compliant FEATURES Includes all homogeneous materials STANDARD EIA 0805 & 1206 PACKAGING *See Part Number System for Details EACH COMPONENT CONTAINS 4 ISOLATED CERAMIC CAPACITORS AVAILABLE IN A WIDE
Thick Film Chip Resistors
Description: The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface
*See Part Number System for Details SPECIFICATIONS. Case Dimensions Type Case Size P 2 NFCC04
FETURES RECTNGULR PCKGE ITH METL STRIP FUSE ELEMENT EI SIZES 42, 63, 85 ND 126 CURRENT RTINGS FROM.2 ~ 5. MPS SFETY STNDRD PPROVL (UL and c-ul File Number E32168) Pb-FREE COMPTILE ITH FLO ND REFLO SOLDERING
Application. Features. Medical equipments, Military equipments Converters Consumer products Communication devices Measurement instruments Printers
Thin Film Chip Resistor TR Series Application Medical equipments, Military equipments Converters Consumer products Communication devices Measurement instruments Printers Features Tight tolerance from ±0.01%,±0.1%,
High Power Low Ohm Chip Resistors. Size W, W, /2W
WW25P, WW20P, WW12P ±1%, ±5% 47mΩ~976mΩ High Power Low Ohm Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25P-20P-12P_V08
CRS-A Series High Power Anti-Surge Resistor
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*
Metal Alloy Low-Resistance Resistor Specifications
Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier
WW25M 1%, 5% Metal Plate Low Ohm Power Chip Resistors. Size 2512 (6432) 1W Current Sensing Type RoHS Exemption free and Halogen free
WW25M 1%, 5% Metal Plate Low Ohm Power Chip Resistors Size 2512 (6432) 1W Current Sensing Type RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page
WR02X ±5%, ±1% General purpose chip resistors Size 0201
WR02X ±5%, ±1% General purpose chip resistors Size 0201 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WR02X Version 03 Jul.-2004 FEATURE 1. Small size and light weight 2. High reliability
Thick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Highly reliable multilayer electrode construction
WK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10H_V01 Jan.2010 FEATURE 1. High reliability and stability
Thick Film General purpose chip resistors
WR02X(W) ±5%, ±1% Thick Film General purpose chip resistors Size 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WR02X_V18 MAY - 2016 FEATURE 1. Small size and
WK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice.
High Power Chip Resistor
Description: The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top
Thin Film Precision Chip Resistor RT03 ~ RT50. Thin Film Precision Chip Resistor RT Series. Features. Applications. Constructions
RT Series eatures Advanced thin film technology Very tight tolerance down to ±0.01% xtremely low TR down to ±5PPM/ Wide resistance range 1ohm ~ 3Mega ohm Miniature size 0201 available RoHS compliant Applications
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Anti-Sulfur SMD Array Chip Resistor STA Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
High Voltage Thick Film Chip Resistor MCHVR Series
eatures Highly reliable multilayer electrode construction Higher component and equipment reliability xcellent performance at high voltage Reduced size of final equipment pplications Inverter Outdoor quipments
TEL: FAX:
Anti-Sulfur Chip Resistor ST Series Application Industrial control system,sensor, Fan,Netcom Station Navigation equipment Measuring instrument Telecommunication equipment, Railway( semaphore) system Features
(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Token Electronics Industry Co., Ltd. Version: July 12, Web:
Version: July 12, 2018 (LRF) 4-Terminal Connection Kelvin Current Sensing Chips Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd.,
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
WT04X ±5%, Convex Type 10p8R Chip resistors network Size 1206
WT04X ±5%, Convex Type 10p8R Chip resistors network Size 1206 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WT04X Ver.13 Sep.-2008 FEATURE 1. Small size and light weight 2. Reduced
Data Sheet. Customer: Automotive Grade Chip Resistor CR..A Series Size: 0201/0402/0603/0805/1206/1210/2010/2512
Data Sheet Customer: Product: CR.. Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: Edition: 12-Jan-18 REV.8 VIKING ECH CORPORION VIKING ECH CORPORION KOHSIUNG RNCH UXI MEC CO., LD. No.70
(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Electronics Tech. Direct Electronics Industry Co., Ltd. Version: July 17, 2018
Version: July 17, 2018 Electronics Tech. (LRF) 4-Terminal Connection Kelvin Current Sensing Chips Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F,
Surface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
WW25X ±1%, ±5% Low ohmic power chip resistors Size 2512
WW25X ±1%, ±5% Low ohmic power chip resistors Size 2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WW25X Version 06 Jul.-2004 FEATURE 1. High power rating and compact size 2.
WR04X ±1%, ±5% General purpose chip resistors Size 0402
WR04X ±1%, ±5% General purpose chip resistors Size 0402 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR04X Version 14 Jul.-2007 FEATURE 1. Small size and light weight 2. High reliability
WF20M / WF12M / WF08M / WF06M 0/-20% and 0/-30% Trimmable chip resistors
WF20M / WF12M / WF08M / WF06M 0/-20% and 0/-30% Trimmable chip resistors Size 2010, 1206, 0805, 0603 Page 1 of 7 WFxxM Trimmable_V11 Apr.2010 FEATURE 1. Reduced size of final equipment 2. Lower assembly
Metal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications Automotive Telecommunication
Power Splitter/Combiner
Ultra-Small Ceramic Power Splitter/Combiner 2 Way-90 50Ω 2500 to 4500 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Power Input (as a splitter) 15W* max. *
WA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4
WA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WA04X Version 20 Sep.-2008 FEATURE 1. Small size and light
Data Sheet. Customer: Automotive Grade Anti-Sulfurated Chip Resistor AS..A Series Size: 0201/0402/0603/0805/1206/1210/2010/2512
Data Sheet Customer: Product: S.. Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: Edition: 12-Jan-18 REV.6 VIKING ECH CORPORION VIKING ECH CORPORION KOHSIUNG RNCH UXI MEC CO., LD. No.70
WF12H, WF08H, WF06H, WF04H ±0.5% High precision chip resistors Size 1206, 0805, 0603, 0402
WF12H, WF08H, WF06H, WF04H ±0.5% High precision chip resistors Size 1206, 0805, 0603, 0402 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WFxxHD ±0.5% Ver.13 March.-2010 FEATURE
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. MOS reduced size metal oxide power type leaded resistor EU features Coated
Data Sheet. Customer: Automotive Grade Current Sensing Chip Resistor CS..A Series Size: 0402/0603/0805/1206/1210/2010/2512/1225/3720/7520
Data Sheet Customer: Product: Size: 0402/0603/0805/1206/1210/2010/2512/1225/3720/7520 Issued Date: Edition: 12-Jan-18 REV.6 VIKING ECH CORPORION VIKING ECH CORPORION KOHSIUNG RNCH UXI MEC CO., LD. No.70
SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low ESR
SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low Ultra Low < 30 mω New E/7260 Case with < 18 mω Up to 5 Amps ripple current RoHS Compliant & Leadfree Termination (see www. kemet.com for
MC 1% Series Thick Film Chip Resistors
Features: Small size and light weight. Suitable for both flow and re-flow soldering. Reduction of assembly costs and matching with placement machines. Performance Specifications: Temperature coefficient
WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive)
WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive) *Contents in this sheet are subject to change without prior notice. Page
Thick Film Low Ohm Chip Resistors
Description: The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top
1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier
SPECIFICATION FOR APPROVAL
Prosperity Dielectrics Co., Ltd. No.220-1, Sec. 2, Nanshan Rd., Lujhu, Taoyuan 33860, Taiwan, R.O.C. Tel. 886-3-3224471 Fax 886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: PART NAME: Thick-Film
Series 308 Electrical Specifications
Series 38 Potentiometer 1/2 in. sq..5 Watt Series 39 Potentiometer 1/2 in. sq. 1. Watt Description The Series 38 and 39 are high-performance, low-cost potentiometers. They are also available with S.P.S.T.
Automotive, Sulfur Resistant Lead (Pb)-Free Thick Film, Rectangular Chip Resistors
Automotive, Sulfur Resistant Lead (Pb)-Free Thick Film, Rectangular Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 C W LIMITING ELEMENT VOLTAGE
Data Sheet. Customer: Automotive Grade Chip Resistor CR..A Series Size: 0201/0402/0603/0805/1206/1210/2010/2512
Data Sheet Customer: Product: CR.. Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: Edition: 15-Jul-16 REV.7 VIKING ECH CORPORION 光頡科技股份有限公司 No.70 Guangfu N. Rd., Hukou ownship, Hsinchu
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING