Anti-Surge Thick Film Chip Resistors

Transcription

1 FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ± TOLERANCE BOTH FLOW AND REFLOW SOLDERING COMPATIBLE SPECIFICATIONS NRCPH NRCPH NRCPH2 206 NRCPH25 20 Power Rating at 70 C /3W (0.33W) /2W (0.50W) 2/3W (0.66W) 3/4W (0.75W) Max. * Working Voltage Max. *2 Overload Voltage Note * - Maximum allowable continuous Working Voltage for all resistors is the lower of the two values: Maximum Working Voltage as specified above (or) Power rating (Watts) x (Ohms) Tolerance Code Temperature Coefficient (ppm/ C) RoHS Compliant includes all homogeneous materials *See Part Number System for Details Range (Ω) Value Operating Temperature Range -55 C ~ +55 C Note *2 - Maximum allowable Overload voltage is 2.5 times the Maximum Working Voltage (see Note * above) or Maximum Overload Voltage as specified in the table whichever is lower PART NUMBER SYSTEM ( VALUES) NRCPH 06 J 04 TR Q Y F RoHS Compliant Q = AEC-Q200 qualified Tape & Reel Packaging Code: First 2 figures are significant, 3rd digit is the multiplier, R indicates a decimal point. Tolerance Code: J=5% : 06=0603, 0=0805, 2=206, 25=20 Series "Y" denotes suitable for automotive equipment, sourced to special production and inspection at TS-6949 certified production site PART NUMBER SYSTEM (E-96 VALUES) NRCPH 06 F 5 TR Q Y F RoHS compliant Q = AEC Q-200 Qualified Tape & Reel Packaging Code: First 3 figures are significant, 4th digit is the multiplier, R indicates a decimal point. Tolerance Code: D=0.5%, F=% : 06=0603, 0=0805, 2=206, 25=20 Series "Y" denotes suitable for automotive equipment, sourced to special production and inspection at TS-6949 certified production site

2 COMPONENT DIMENSIONS (mm) L W H P P2 NRCPH ± / ± ± ± 0.0 NRCPH ± ± ± ± ± 0.20 NRCPH ± ± ± ± ± 0.25 NRCPH ± ± ± ± ± 0.25 COMPONENT MARKING EXAMPLES (0805, 206 & 20 s) No Marking on 0603 E-96 Values % AND 5% TOLERANCE VALUES 0.5% & % TOLERANCE E-96 VALUES Value: 0KW AND E-96 STANDARD VALUES E Value: 562KW , 0805, 206 & 20 s 0805, 206 & 20 s 2

3 CONSTRUCTION No. Item Main Material Substrate Alumina 2 Resistor Thick Film RuO2 3 Protective Coating Glass 4 Protective Coating Resin 5 Bottom Terminal Thick Film Ag 6 Upper Terminal Thick Film Ag-Pd 7 Side Terminal Thick Film NiCr 8 Terminal Plating st (Ni) 9 Terminal Plating 2nd (00% Sn) 0 Marking Resin Single Pulse Power Characteristics R: 00W NRCPH25 NRCPH2 NRCPH0 One Pulse Power (W) 0.0 NRCPH Pulse Duration (ms) 3

4 PERFORMANCE CHARACTERISTICS Test Items High temperature exposure (storage) AEC-Q200 - No. 3 Temperature Cycling AEC-Q200 - No. 4 Humidity Load Life AEC-Q200 - No. 7 Requirement DR = ± ([ ] +0.05W) Test Method (AEC-Q200 REV. D) [.0%] 55 C,000 hours (no load) 00 times at -55 C 30 minutes/+25 C 30 minutes [%] +85 C, 85% 0% of rated power applied continuously for,000 hours Load Life AEC-Q200 - No. 8 [%] Voltage to achieve 35% of rated power or 50V whichever is less applied continuously for, C Physical Dimensions AEC-Q200 - No. 0 JESD22 Method JB-00 As in table "DIMENSIONS (mm)" on page 2 to solvents AEC-Q200 - No. 2 No visible damage to marking and coating Solvent: 25 C 3 cycles of immersion for 3 minutes & brushed 0 times Mechanical Shock AEC-Q200 - No. 3 Vibration AEC-Q200 - No. 4 to Soldering Heat AEC-Q200 - No. 5 Waveform: alf sine, peak value 00G Normal duration 6ms, Condition: X, Y, Z 0 times in each direction Peak acceleration: 5g's for 20 minutes Frequency: 0Hz ~ 2,000Hz 2 cycles in each of 3 orientations Immersion into solder bath at 260 C for 0 seconds ESD AEC-Q200 - No. 7 Solderabiilty AEC-Q200 - No. 8 PCB Flexing AEC-Q200 - No. 2 Adhesion AEC-Q200 - No. 22 [.0%] Terminal surface shall be immersed, minimum of 95% coverage with new solder Human Body Model, 2K ohm resistor, 50pF capacitor Test voltage: KV, 0805, 206 & 20-3KV J-STD-002 a) Method B, C dry C for 5 secs. Sn96.5-Ag3-Cu0.5 b) Method +25 C for 5 secs, category 3, Sn63Pb37 c) Method D, category +260 C for 7 secs. AEC-Q Bending to 2mm for 60 seconds AEC-Q Pressurized force: N, 0805, 206 & N Duration: 60 secs ± sec. 300 C 260 C 230 C 200 C 50 C 00 C 50 C REFLOW SOLDERING TEMPERATURE PROFILE Peak Temperature 50 C ~ 80 C 20 sec. max. Time above 230 C 30 sec. max. 260 C 0 sec. max. CLIMATE CATEGORY (IEC 60068): 55/55/56 Lower category temperature: -55 C Upper category temperature: +55 C Duration of damp heat, steady state: 56 days LAND PATTERN DIMENSIONS (mm) a b c 0603 Flow Reflow Flow Reflow Flow Reflow Flow Reflow C Note: Maximum of 2 times RECOMMENDED FLOW SOLDERING CONDITIONS Pb-free Solder: Sn3.0 - Ag0.5 - Cu Preheat: 0 C ~ 30 C for 60 ~ 20 seconds Peak Temperature: 245 C ~ 250 C for 3 ~ 5 seconds a b c 4

5 PAPER CARRIER TAPE DIMENSIONS (mm) NRCPH ± ± 0.20 NRCPH ± ± 0.20 NRCPH ± ± 0.20 A B D E F P o T W.5 +0./-0.75 ± ± ± ± max..00 max 8.0 ± 0.2 P 0 D E Cover tape F W B T A PLASTIC CARRIER TAPE DIMENSIONS (mm) A B D E F P o T T2 W NRCPH ± ± /-0.75 ± ± ± ± max..00 ± ± 0.3 T P 0 D E Cover tape F W B A T 2 REEL DIMENSIONS AND QUANTITY f60 +.0/-0 f80 +0/-.5 f3 ±0.2 L Quantity NRCPH ,000 NRCPH , /0 NRCPH ,000 NRCPH ,000 L 5