High Power Thin Film Chip Resistors

Size: px
Start display at page:

Download "High Power Thin Film Chip Resistors"

Transcription

1 FETURES IMPROVE POWER RTING (HIGHER THN NTR SERIES) PRECISE TOLERNCE N TEMPERTURE COEFFICIENT EI STNR CSE SIZES (0603 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous materials *See Part Number System for etails NTRH06 EI Size 0603 Power Rating at 70 C Max.*1 Working Max.*2 Overload 1/10 (0.100)W 75V 150V NTRH07 1/6 (0.166)W 100V 150V NTRH10 NTRH11 NTRH12 NTRH /8 (0.125)W 1/4 (0.250)W 1/4 (0.250)W 1/3 (0.333)W 150V 200V 300V 400V NTRH /3 (0.333)W 200V 400V NTRH /3 (0.333)W 200V 400V Tolerance (Code) Temperature Coefficient (ppm/ C) Range (Ω) ±0.01% (T), ±0.05% (), ±0.1% () ±2 (X), ±3 (O) 24.9 ~ 15KΩ ±5 (S) 24.9 ~ 15KΩ ±0.01% (T) ±10 () 24.9 ~ 100KΩ ±0.05% () 4.7 ~ 332KΩ ±10 () ±0.1% (), 4.7 ~ 332KΩ ± 0.05% (), ±0.1% (), ±0.25 (C), 10 ~ 332KΩ ±0.5 (), ±1% (F) ±0.01% (T), ±0.05% (), ±0.1% () ±2 (X), ±3 (O) 24.9 ~ 30KΩ ±5 (S) 24.9 ~ 30KΩ ±0.01% (T) ±10 () 24.9 ~ 200KΩ ±0.05% () 4.7 ~ 511KΩ ±0.1% (), ±10 () 4.7 ~ 511KΩ ±0.1% () 1.0 ~ 1MΩ ± 0.05% (), ±0.1% (), ±0.25 (C), ±0.5 (), ±1% (F) 10 ~ 499KΩ ±0.01% (T), ±0.05% (), ±0.1% () ±2 (X), ±3 (O) 24.9 ~ 49.9KΩ ±0.01% (T) ±10 () 24.9 ~ 499KΩ 10 ~ 1MΩ ±0.01% (T), ±0.05% (), ±0.1% () ±2 (X), ±3 (O) 24.9 ~ 49.9KΩ ±0.01% (T) ±10 () 24.9 ~ 499KΩ ±0.01% (T), ±0.05% (), ±0.1% () ±2 (X), ±3 (O) 24.9 ~ 49.9KΩ ±0.01% (T) ±10 () 24.9 ~ 499KΩ Continue on next page Reistance Values E24 & E-96 1

2 NTRH25 EI Size 2512 Power Rating at 70 C 3/4 (0.750)W NTRH26 1.0W Max.*1 Working 200V Max.*2 Overload 400V Tolerance (Code) Temperature Coefficient (ppm/ C) Range (Ω) 24.9 ~ 2KΩ ±0.01% (T) ±0.05% (), ±0.1% () ±10 () 4.7 ~ 2KΩ 1.0 ~ 2KΩ 0.1% () 4.7 ~ 100Ω 1.0 ~ 100Ω Reistance Values E24 & E-96 ENVIRONMENTL CHRCTERISTICS Item Specification Test Method Temperature Coefficient of MIL-ST-202, Method 304 s specified +25/-55/+25/+125/+25 Short Time Overload R ± 0.5% JIS-C RCWV x 2.5 or Max Overloading for 5 Seconds ielectric Withstanding s specified MIL-ST-202F Method 301 pply Max. Overload for 1 minute Insulation >1000MΩ MIL-ST-202F Method 302 pply 100Vdc for 1 minute Thermal Shock R ± 0.25% MIL-ST-202F Method 107G -55 C ~ +150 C, 100 cycles Load Life R ± 0.5% MIL-ST-202F Method 108 RCWV +70 C, 1.5 hours ON, 0.5 hours OFF Total time 1,000 ~ 1,048 hours Humidty (Steady State) R ± 0.5% MIL-ST-202F Method C, 90% ~ 95% RH, RCWV 1.5 hours ON, 0.5 hours OFF Total time 1,000 ~ 1,048 hours to ry Heat R ± 0.2% JIS-C C without load Low Temperature Operation R ± 0.5% JIS-C C followed by 45 minutes of RCWV ending Strength R ± 0.2% JIS-C ending mplitude 3mm for 10 seconds Solderability 95% Minimum MIL-ST-202F Method 208H Coverage 245 C ±5 C, 5 ±0.5 seconds to Soldering Heat R ± 0.2% MIL-ST-202F Method 210E 260 C ±5 C for 10 ±1 seconds PRT NUMER SYSTEM NTRH C TR F RoHS compliant Tape & Reel Packaging Temperature Coefficient Code: X = ±2ppm, O = ±3ppm, S = ±5ppm, = ±10ppm, N = ±15ppm, C = ±25ppm, = ±50ppm Code: First 3 digits are significant figures (both E-24 and E-96 values), 4th digit is the multiplier, R indicates a decimal point. Tolerance Code: T = ± 0.01%, = ± 0.05%, = ± 0.1%, C = ± 0.25%, = ± 0.5%, F = ± 1% Power Rating Code Series 2

3 Note *1 - Maximum allowable continuous Working for all resistors is the lower of the two values: Maximum Working as specified above or Power rating (Watts) x (Ohms) Note *2 - Maximum Overload for all resistors is the lower of the two values: "Maximum Overload as specified above or 2.5 x Power rating (Watts) x (Ohms) TYPICL NOISE CHRCTERISTICS Value (Ω) Case Size ~ 9-95d -95d -95d 10 ~ 49-85d -85d -85d 50 ~ 99-85d -85d -85d 100 ~ 4.99K -100d -100d -105d 5K ~ 19.9K -100d -100d -100d 20K ~ 1M -90d -100d -100d Percentage of Power Rating Power erating Curve: For operation above 70 C, power rating must be derated according to the following chart: Temperature C STNR E-24, E-96 VLUES N 0603 RESISTNCE COES E-24 E-96 Value Value Code Value Code Value Code Value Code MULTIPLIER COES, Code C, d E F G H X Y Z b Multiplier Marking for 0603 case size is a three character code. The code includes two characters to denote the value (based on 0603 Codes Table and a third character that denotes the value multiplier (see multiplier codes table). COING FORMUL XX X Multiplier Code Code MRKING EXMPLES 10Ω = 01X 7.5k Ω = k Ω = 18 1 MegΩ = 01E 2. The 0805 and 1206 case sizes parts use the standard four character marking metthod as shown in the examples below. E-24 and E-96 series - ±0.5% (), ±0.25%(C), ±0.1% () tolerances 4 IGIT MRKING SYSTEM - First 3 digits are the significant figures, the 4th digit is the mulitplier. "R"= decimal point. Examples: 0R10 = 0.10 ohms, 1R00 = 1.0 ohms, 22R1=22.1 ohms, 3320= 332 ohms, 4751=4.75K ohms, 1132=11.3K ohms, 6493=649K ohms 3

4 IMENSIONS (mm) EI Size L W H T t NTRH06/ ± ± ± ± ± 0.20 NTRH10/ ± ± ± ± ± 0.25 NTRH12/ ± ± ± ± ± 0.25 NTRH ± ± ± ± ± 0.25 NTRH ± ± ± ± ± 0.25 NTRH25/ ± ± ± ± ± 0.25 TPING SPECIFICTIONS (1) vailability EI Size NTRH06/ NTRH10/ NTRH12/ NTRH NTRH NTRH25/ Carrier Tape Material Width (mm) Qty per Reel (pcs) Paper 8 5,000 Plastic 12 4,000 (2) PPER TPE IMENSIONS (mm) EI Size ± 0.05 ±0.05 E F P 0 W T NTRH06/ ±0.03 NTRH10/ ± ± ± ± ± ± ±0.1 NTRH12/ ±0.05 NTRH ± (0402 ~ 1206) 16.4 ± 1.0 (2010 ~ 2512) w 1 P 0 Cover tape E F W 2.0 ± ± ± ±2 180 ±3 T W (0402 ~ 1206) 14 ± 0.5 (2010 ~ 2512) 4

5 (2) PLSTIC TPE IMENSIONS (mm) EI Size ± 0.10 ±0.10 E F P 0 W T NTRH ± ± ± ± ± ± ± ±0.20 NTRH25/ P 0 E min. F W T PEK REFLOW SOLERING CONITIONS 260 C 10 Sec. 1 ~ 5 C/Sec. 1 ~ 5 C/Sec. LN PTTERN IMENSIONS (mm) EI Size C NTRH06/ ± 0.2 NTRH10/ ± 0.2 NTRH12/ ± 0.2 NTRH ± 0.2 NTRH ± 0.2 NTRH25/ ± ~ 9 C/Sec. 120 Sec. C 0 5

Automotive Grade Thin Film Chip Resistors

Automotive Grade Thin Film Chip Resistors FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55

More information

NPI Power Inductors. NPI W Series

NPI Power Inductors. NPI W Series FETURES HIGH URRENT, SMLL SIZE (UP TO 8.6 MPS) SURFE MOUNTLE ONSTRUTION HIGH INUTNE (UP TO 1000µH) TPE N REELE FOR UTOMTI INSERTION FOR USE IN / ONVERTERS HRTERISTIS ase Size NPI16W NPI31W NPI34W NPI52W

More information

Thick Film Chip Resistors

Thick Film Chip Resistors FEATURES EIA STANDARD SIZING 01005(1/32), 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES

More information

Thin Film Chip Resistor (ARG Series)

Thin Film Chip Resistor (ARG Series) Construction D1 L (ARG Series) Features -Advanced thin film technology -SMD Type designed for automatic insertion -Wide resistance range 1ohm ~ 2.49Mega ohm Applications -Medical Equipment -Testing / Measurement

More information

SMD High Power Precision Resistors

SMD High Power Precision Resistors Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications

More information

Anti-Surge Thick Film Chip Resistors

Anti-Surge Thick Film Chip Resistors FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE

More information

Anti-Surge Thick Film Chip Resistors

Anti-Surge Thick Film Chip Resistors FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±

More information

Surface Mount Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors FETURES YLINRIL V-HIP ONSTRUTION FOR SURFE MOUNTING SUIT FOR HIGH TEMPERTURE REFLOW SOLERING (UP TO 260 ) 2,000 HOUR LO LIFE @ +85 ) ESIGNE FOR UTOMTI MOUNTING N REFLOW SOLERING HRTERISTIS Rated Voltage

More information

Thin Film Anti-Sulfurated Chip Resistor (TAS Series)

Thin Film Anti-Sulfurated Chip Resistor (TAS Series) (TAS Series) Features - Special materials, design, and processing for high sulfur applications - Tolerances as low as 0.05% and s as low as 10 ppm. - Test proven immunity to humidity, moisture, and sulfur

More information

Thick Film Chip Resistors

Thick Film Chip Resistors FEATURES EIA STANDARD SIZING 01005(1/32), 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES

More information

Surface Mount Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors CYLINDRICL VCHIP CONSTRUCTION FOR SURFCE MOUNTING VERY LOW IMPEDNCE WIDE TEMPERTURE RNGE (55 +5 O C) REDUCED SIZE DESIGNED FOR UTOMTIC MOUNTING ND REFLOW SOLDERING MEETS THE REQUIREMENTS OF ECQ200* *Contact

More information

*See Part Number System for Details SPECIFICATIONS. Case Dimensions Type Case Size P 2 NFCC04

*See Part Number System for Details SPECIFICATIONS. Case Dimensions Type Case Size P 2 NFCC04 FETURES RECTNGULR PCKGE ITH METL STRIP FUSE ELEMENT EI SIZES 42, 63, 85 ND 126 CURRENT RTINGS FROM.2 ~ 5. MPS SFETY STNDRD PPROVL (UL and c-ul File Number E32168) Pb-FREE COMPTILE ITH FLO ND REFLO SOLDERING

More information

Surface Mount Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors FETURES YLINRIL V-HIP ONSTRUTION LONG LIFE (7,000 ~ 10,000 HOURS) IE TEMPERTURE RNGE (-25 ~ +105 ) ESIGNE FOR REFLO SOLERING RoHS ompliant includes all homogeneous materials *See Part Number System for

More information

Metal Film MELF Resistors

Metal Film MELF Resistors FEATURES SURFACE MOUNT IN SIZES 0102 (0805), 0204 (1406) AND 0207 (2410) AVAILABLE IN PRECISION TOLERANCE AND TC (TO ±0.1% TOL. AND ±10PPM TC) ALL SIZES ARE AVAILABLE IN TAPE/REEL FOR AUTOMATIC MOUNTING

More information

Surface Mount Aluminum Electrolytic Capacitors NACZF Series

Surface Mount Aluminum Electrolytic Capacitors NACZF Series FETURES YLINRIL LELESS TYPE FOR SURFE MOUNTING HIGH PITNE VLUES (UP TO 6800µF) LO IMPENE/HIGH RIPPLE URRENT T 100KHz 12.5mm x 17mm ~ 18mm x 22mm SE SIZES IE TERMINTION STYLE FOR HIGH VIRTION.PPLITIONS

More information

MC 5% Series. Construction. Power Rating and Dimension. Features: Page <1> 07/04/12 V1.1. Dimension. Width (W) ± Series. Height (H) ±0.

MC 5% Series. Construction. Power Rating and Dimension. Features: Page <1> 07/04/12 V1.1. Dimension. Width (W) ± Series. Height (H) ±0. Construction Power Rating and Dimension Series Length (L) ±0.1 Width (W) ±0.15-0.1 Dimension Height (H) ±0.05 Length (L1) ±0.1 Length (L2) ±0.1 MC 0603 1.6 ±0.1 0.8 0.45 0.3 0.3 MC 0805 2 ±0.15 1.25 0.4

More information

Temperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance

Temperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance .220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature

More information

MMP - Metal Film MELF

MMP - Metal Film MELF Specifications Per IEC 60115-1 D2 EN140401-803 B L D1 Features SMD enabled structure Excellent solderability termination Products meet RoHS requirements and do not contain substances of very high concern

More information

Application. Features. Medical equipments, Military equipments Converters Consumer products Communication devices Measurement instruments Printers

Application. Features. Medical equipments, Military equipments Converters Consumer products Communication devices Measurement instruments Printers Thin Film Chip Resistor TR Series Application Medical equipments, Military equipments Converters Consumer products Communication devices Measurement instruments Printers Features Tight tolerance from ±0.01%,±0.1%,

More information

Application. Features

Application. Features Thick Film Chip Resistor CR Series Application Entertainment: Stereo, TV tuners, Tape recorder Appliance: Air conditioner, Refrigerator Computer & relative products: Main board, PDA Communication equipment:

More information

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier

More information

WW12W ±1%, ±5% Size W. Thick Film High Power Low Ohm Chip Resistors. Approval sheet

WW12W ±1%, ±5% Size W. Thick Film High Power Low Ohm Chip Resistors. Approval sheet ±1%, ±5% Thick Film High Power Low Ohm Chip Resistors Size 1206 1W *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC 1W TC200_V01 DEC - 2015 FEATURE 1. High power rating

More information

High Power Low Ohm Chip Resistors. Size W, W, /2W

High Power Low Ohm Chip Resistors. Size W, W, /2W WW25P, WW20P, WW12P ±1%, ±5% 47mΩ~976mΩ High Power Low Ohm Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25P-20P-12P_V08

More information

Thick Film Arrray Chip Resistor RP164PJxxx Series

Thick Film Arrray Chip Resistor RP164PJxxx Series Thick Film Arrray Chip Resistor Array Chip Resistor 4 Element 0603 Convex Types Features Convex Termination Less board space than individual chip resistors Cost reduction efficiency by eliminating mounter

More information

1 7 ASC_WF06A_V01 NOV

1 7 ASC_WF06A_V01 NOV WF06A 1 ~ 1Mohm ±5%, ±1% High Power Chip Resistors Size 0603 1/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF06A_V01 NOV - 2015 FEATURE 1. Small size and light

More information

Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & ANTI-SULFURATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free

Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & ANTI-SULFURATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free No.: RMNW K HTS-1 /3 Date: 217. 4. 21 Data sheet : ANTI-SULFURATION RMNW1,16,2,32,35 AEC-Q2 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock conditions Temperature: +5 C +35 C Relative

More information

RWW S2W RWW 2W RWW S3W 1/4 1/2 1/ W V

RWW S2W RWW 2W RWW S3W 1/4 1/2 1/ W V Axial Round Wirewound Resistor Normal & Miniature Style Series Axial Round Wirewound Resistor Normal & Miniature Style Features Low cost, high performance, excellent long-term stability Wide resistance

More information

SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512

SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512 SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512 ( Automotive & Anti-sulfuration ) Page 1 of 7 SR20-25X_V04 Sep.-2011 FEATURE 1. High reliability and stability ±1% 2. Sulfuration resistant 1000ppm

More information

Metal Film Leaded Precision Resistor

Metal Film Leaded Precision Resistor Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications Automotive Telecommunication

More information

FPS series. (AEC-Q200) Triple Rated Power / Anti-Surge Thick-film Lead Free Chip Resistors

FPS series. (AEC-Q200) Triple Rated Power / Anti-Surge Thick-film Lead Free Chip Resistors 1. Features.....2 2. Applications....... 2 3. Dimension and construction....2 4. Power Derating Curve.....3 5. Rating.3 6. Part Number.. 4 7. Marking / Soldering..4 8. Reliability Performance.6 9. Packing...9

More information

MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array

MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) Page 1 of 8 MA04/ 06_V03 Apr.2010 FEATURE 1. High reliability and stability

More information

(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Token Electronics Industry Co., Ltd. Version: July 12, Web:

(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Token Electronics Industry Co., Ltd. Version: July 12, Web: Version: July 12, 2018 (LRF) 4-Terminal Connection Kelvin Current Sensing Chips Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd.,

More information

High Power Chip Resistors Size W, W, /2W

High Power Chip Resistors Size W, W, /2W WF25P, WF20P, WF12P ±1%, ±5% 0Ω,1Ω~1MΩ High Power Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WF25P, WF20P, WF12P, Ver.8 Jul.2010

More information

(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Electronics Tech. Direct Electronics Industry Co., Ltd. Version: July 17, 2018

(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Electronics Tech. Direct Electronics Industry Co., Ltd. Version: July 17, 2018 Version: July 17, 2018 Electronics Tech. (LRF) 4-Terminal Connection Kelvin Current Sensing Chips Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F,

More information

Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage

Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage 627, 628 Series.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor etworks RoHS Compliant ELECTRICAL Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature

More information

SPECIFICATION FOR APPROVAL

SPECIFICATION FOR APPROVAL Prosperity Dielectrics Co., Ltd. No.220-1, Sec. 2, Nanshan Rd., Lujhu, Taoyuan 33860, Taiwan, R.O.C. Tel. 886-3-3224471 Fax 886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: PART NAME: Thick-Film

More information

WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array

WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size

More information

TEL: FAX:

TEL: FAX: Anti-Sulfur Chip Resistor ST Series Application Industrial control system,sensor, Fan,Netcom Station Navigation equipment Measuring instrument Telecommunication equipment, Railway( semaphore) system Features

More information

WF06P 5% High power chip resistors Size 0603, 1/8watt

WF06P 5% High power chip resistors Size 0603, 1/8watt SPECIFICATION OF HIGH POWER CHIP RESISTOR Ver: 1 Page: 1 of 7 ROHS compliance WF06P 5% High power chip resistors Size 0603, 1/8watt Customer : Approval No : Issue Date : Customer Approval : SPECIFICATION

More information

Metal Alloy Low-Resistance Resistor Specifications

Metal Alloy Low-Resistance Resistor Specifications Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following

More information

DATA SHEET CURRENT SENSOR - LOW TCR PT series 5%, 2%, 1% sizes 0402/0603/0805/1206/2010/2512

DATA SHEET CURRENT SENSOR - LOW TCR PT series 5%, 2%, 1% sizes 0402/0603/0805/1206/2010/2512 DATA SHEET CURRENT SENSOR - LOW TCR PT series 5%, 2%, 1% sizes 0402/0603/0805/1206/2010/2512 RoHS compliant & Halogen free Product specification December 30, 2015 V.1 Product specification 2 SCOPE This

More information

SPECIFICATION SHEET. ±1%, ±5%, Convex Type General purpose chip resistors array

SPECIFICATION SHEET. ±1%, ±5%, Convex Type General purpose chip resistors array SPECIFICATION SHEET CNA24, CNA34 ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) All data in this sheet are subject to change, modify

More information

WW25W, WW20W, WW10W, WW12W, WW08W, WW06W

WW25W, WW20W, WW10W, WW12W, WW08W, WW06W WW25W, WW20W, WW10W, WW12W, WW08W, WW06W ±1%, ±5% Thick Film Power Low Ohm Chip Resistors RoHS Exemption free and Lead free Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to

More information

WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512

WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512 WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18-20-25X(W) Ver.13 Oct.-2010 FEATURE 1. High power

More information

Thin Film Precision Chip Resistor RT03 ~ RT50. Thin Film Precision Chip Resistor RT Series. Features. Applications. Constructions

Thin Film Precision Chip Resistor RT03 ~ RT50. Thin Film Precision Chip Resistor RT Series. Features. Applications. Constructions RT Series eatures Advanced thin film technology Very tight tolerance down to ±0.01% xtremely low TR down to ±5PPM/ Wide resistance range 1ohm ~ 3Mega ohm Miniature size 0201 available RoHS compliant Applications

More information

WK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603

WK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603 WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change

More information

Surface Mount Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors FETURES YLINDRIL V-HIP ONSTRUTION FOR SURFE MOUNTING REDUED SIZE VILLE WITH NTI-VIRTION TERMINTIONS (8 & 10mm DIMETER) SUIT FOR HIGH TEMPERTURE REFLOW SOLDERING (UP TO 260 ) 2,000 HOUR LOD LIFE @ +105

More information

74x Series Chip Resistor Arrays

74x Series Chip Resistor Arrays Features Low Cost Thick Film Technology Leadless Surface Mount Construction Concave Convex Terminations Solder Coated Nickel Barrier Pads Isolated and Bussed Circuit Configurations Improved TCR Tracking

More information

(RMG30) TO-220 Snubber Power Film Bleeder Resistors. Token Electronics Industry Co., Ltd. Version: January 12, Web:

(RMG30) TO-220 Snubber Power Film Bleeder Resistors. Token Electronics Industry Co., Ltd. Version: January 12, Web: Version: January 12, 2017 (RMG30) TO-220 Snubber Power Film Bleeder Resistors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu

More information

WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210

WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210 WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10H_V01 Jan.2010 FEATURE 1. High reliability and stability

More information

WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432)

WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432) WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432) Metal Current Sensing Type *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25N_V14 Jul - 2015

More information

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier

More information

WW12M, WW12N ±1%, ±5%, 1/2W, 1W Ultra low ohmic power chip resistors

WW12M, WW12N ±1%, ±5%, 1/2W, 1W Ultra low ohmic power chip resistors WW12M, WW12N ±1%, ±5%, 1/2W, 1W Ultra low ohmic power chip resistors Size 1206 (3216) Sensing Type *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW12MN_V05 Jul.2010

More information

Datasheet RS Pro RS Series Thick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063W ±100ppm/ C RS Stock No:

Datasheet RS Pro RS Series Thick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063W ±100ppm/ C RS Stock No: Datasheet RS Pro RS Series hick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063 ±100ppm/ C RS Stock No: 716-8721 Product Details RS Pro 0402 thick film surface mount resistor with ±1% tolerance, provides

More information

WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1206, 0805, 0603, ( Automotive )

WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1206, 0805, 0603, ( Automotive ) WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors Size 1206, 0805, 0603, 0402 ( Automotive ) Page 1 of 9 WR_J(AUTO)_ V03 Sep.2010 FEATURE 1. Automotive grade AEC Q-200 compliant 2. 100% CCD

More information

WF08P, WF06P. High Power Chip Resistors Size /4W ; /8W. Customer : Approval No : Issue Date : Customer Approval :

WF08P, WF06P. High Power Chip Resistors Size /4W ; /8W. Customer : Approval No : Issue Date : Customer Approval : WF08P, WF06P ±1%, ±5% 0Ω, 1Ω~1MΩ High Power Chip Resistors Size 0805 1/4W ; 0603 1/8W Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WF08P;WF06P Version 04 Jul.-2009 FEATURE 1. Small

More information

PRCP POLYMER RESETTABLE CIRCUIT PROTECTORS FEATURES APPLICATIONS PART NUMBER DESIGNATION P R C P - M S M F / 2 4 X - 2 E- 9 9.

PRCP POLYMER RESETTABLE CIRCUIT PROTECTORS FEATURES APPLICATIONS PART NUMBER DESIGNATION P R C P - M S M F / 2 4 X - 2 E- 9 9. FETURES PPLITIONS PRT NUMER ESIGNTION P R P - M S M F 0 7 5 / 4 X - E- 9 9 Product name Product number Hold current (I hold) Higher voltage option lankstandard 66 volt rated volt rated 4040 volt rated

More information

WK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805, 0603

WK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805, 0603 WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice.

More information

WR10, WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1210, 1206, 0805, 0603, 0402

WR10, WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1210, 1206, 0805, 0603, 0402 WR10, WR12, WR08, WR06, WR04, General purpose chip resistors Size 1210, 1206, 0805, 0603, 0402 ( Automotive & Anti-sulfuration ) *Contents in this sheet are subject to change without prior notice. Page

More information

CRS-A Series High Power Anti-Surge Resistor

CRS-A Series High Power Anti-Surge Resistor *RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*

More information

Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration )

Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration ) SR12, SR10, SR08, SR06, SR04, General purpose chip resistors Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration ) *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_SR_V03

More information

WR10X ±1%, ±5% General purpose chip resistors Size 1210

WR10X ±1%, ±5% General purpose chip resistors Size 1210 WR10X ±1%, ±5% General purpose chip resistors Size 1210 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR10X Version 02 Jun.-2005 FEATURE 1. High reliability and stability 2. Reduced

More information

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) Anti-Sulfur SMD chip resistor ST Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4

More information

WT04X ±5%, Convex Type 10p8R Chip resistors network Size 1206

WT04X ±5%, Convex Type 10p8R Chip resistors network Size 1206 WT04X ±5%, Convex Type 10p8R Chip resistors network Size 1206 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WT04X Ver.13 Sep.-2008 FEATURE 1. Small size and light weight 2. Reduced

More information

PRCP POLYMER RESETTABLE CIRCUIT PROTECTORS FEATURES APPLICATIONS PART NUMBER DESIGNATION P R C P - M S M F / 2 4 X - 2 E- 9 9.

PRCP POLYMER RESETTABLE CIRCUIT PROTECTORS FEATURES APPLICATIONS PART NUMBER DESIGNATION P R C P - M S M F / 2 4 X - 2 E- 9 9. FETURES PPLITIONS PRT NUMER ESIGNTION P R P - M S M F 0 7 5 / 4 X - E- 9 9 Product name Product number Hold current (I hold) Higher voltage option lankstandard 6 6 volt rated 4 4 volt rated0 0 volt rated

More information

Current Sensing Chip Resistors

Current Sensing Chip Resistors FEURES SURFCE MOUNE 0805, 1206, 2010 ND 2512 CSE SIZE O RESISNCE ME SRI CONSRUCION RECISON OERNCE (±1%) ED & REE CKGING FOR ESY ICK ND CE REFO COMIE SECIFICIONS ype EI Size Material (See Note on EMF Characteristics

More information

Switch EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS 3PST EDG/EDS 4PST EDG/EDS DPDT

Switch EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS 3PST EDG/EDS 4PST EDG/EDS DPDT EDG/EDS SERIES SLIDE TYPE EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS PST EDG/EDS 4PST EDG/EDS DPDT FETURES Tactile response is performed directly by larger contact pressure to ensure very stable contact.

More information

Thick Film General purpose chip resistors

Thick Film General purpose chip resistors WR02X(W) ±5%, ±1% Thick Film General purpose chip resistors Size 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WR02X_V18 MAY - 2016 FEATURE 1. Small size and

More information

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier

More information

Current Sensing Resistor Metal Foil Type >SMF Series

Current Sensing Resistor Metal Foil Type >SMF Series Page: 1 of 6 General Chip size from 0603 to Resistance value from 3mΩ to 200mΩ Low thermal EMF. Low TCR. Lead free, RoHS compliant for global applications and halogen free Application Switching model power

More information

WA04, WA06 ±1%, ±5%, Convex Type & Concave Type General purpose chip resistors array

WA04, WA06 ±1%, ±5%, Convex Type & Concave Type General purpose chip resistors array WA04, WA06 ±1%, ±5%, Convex Type & Concave Type General purpose chip resistors array Size 0402x2 (4p2R) Size 0402x4, 0603x4 (8p4R) Size 0602x8 (16p8R) *Contents in this sheet are subject to change without

More information

WK25S WK20S WK10S WK12S WK08S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805

WK25S WK20S WK10S WK12S WK08S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805 WK25S WK20S WK10S WK12S WK08S ±5%, ±10%, ±20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WKxxS_V02

More information

MC 1% Series Thick Film Chip Resistors

MC 1% Series Thick Film Chip Resistors Features: Small size and light weight. Suitable for both flow and re-flow soldering. Reduction of assembly costs and matching with placement machines. Performance Specifications: Temperature coefficient

More information

Wirewound Resistor, Industrial High Power, Vitreous Tubular, Adjustable, Low Values 0.12 to 560

Wirewound Resistor, Industrial High Power, Vitreous Tubular, Adjustable, Low Values 0.12 to 560 Wirewound Resistor, Industrial High Power, Vitreous Tubular, djustable, Low Values to 560 FETURES High power rating: 16 W to 600 W at 25 C Heavy overloads 10 P n 15 s 1 % Low ohmic values 0.10 available

More information

1 8 WK L_V_AUTO_V01 FEB

1 8 WK L_V_AUTO_V01 FEB WK12L, WK20L, WK25L 1%, 5% Thick Film Power Chip Resistor Wide Termination RoHS compliant and Halogen free Size 0612, 1020, 1225 Automotive AEC Q200 Compliant ASTM B-809-95 Compliant *Contents in this

More information

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) AEC-Q200 Chip Resistor QR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier

More information

Thick Film Chip Resistors

Thick Film Chip Resistors Thick Film Chip Resistors Features: Small size and light weight. Suitable for both flow and reflow soldering. Reduction of assembly costs and matching with placement machines. Performance Specifications:

More information

(mω) 1. Temperature ( C) Voltage (V) ULRG1 /

(mω) 1. Temperature ( C) Voltage (V) ULRG1 / Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl

More information

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier

More information

WA04T ±5%, ±1% Concave Type General purpose chip resistors array

WA04T ±5%, ±1% Concave Type General purpose chip resistors array WA04T ±5%, ±1% Concave Type General purpose chip resistors array Size 0402x4 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WA04T_Concave_V10 Oct.2010 FEATURE 1. Small

More information

Molded Chip Wirewound Inductors

Molded Chip Wirewound Inductors FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC

More information

Multilayer Acrylic Polymer Film Capacitors

Multilayer Acrylic Polymer Film Capacitors FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC

More information

After 5 seconds at +260 C (with pre-conditioning) (±20% for 0402 & 0603 case sizes) After 500 hours at 60 C and 90 ~ 95% RH Humidity

After 5 seconds at +260 C (with pre-conditioning) (±20% for 0402 & 0603 case sizes) After 500 hours at 60 C and 90 ~ 95% RH Humidity FEATURES SIZES K(0402), J (0603), D (0805) AND C (1008) HIGH Q, HIGH CURRENT AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE* HIGH AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC TAPE PACKAGE

More information

WA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4

WA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4 WA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WA04X Version 15 Sept.-2004 FEATURE 1. Small size and light

More information

Multilayer Ceramic Chip Capacitors

Multilayer Ceramic Chip Capacitors RoHS Compliant FEATURES Includes all homogeneous materials STANDARD EIA 0805 & 1206 PACKAGING *See Part Number System for Details EACH COMPONENT CONTAINS 4 ISOLATED CERAMIC CAPACITORS AVAILABLE IN A WIDE

More information

WR12X / WR08X / WR06X ±1%, ±5% General purpose chip resistors Size 1206 / 0805 / 0603

WR12X / WR08X / WR06X ±1%, ±5% General purpose chip resistors Size 1206 / 0805 / 0603 WR12X / WR08X / WR06X ±1%, ±5% General purpose chip resistors Size 1206 / 0805 / 0603 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WR12X / WR08X / WR06X Version 17 Jul.-2004 FEATURE

More information

WF20M / WF12M / WF08M / WF06M 0/-20% and 0/-30% Trimmable chip resistors

WF20M / WF12M / WF08M / WF06M 0/-20% and 0/-30% Trimmable chip resistors WF20M / WF12M / WF08M / WF06M 0/-20% and 0/-30% Trimmable chip resistors Size 2010, 1206, 0805, 0603 Page 1 of 7 WFxxM Trimmable_V11 Apr.2010 FEATURE 1. Reduced size of final equipment 2. Lower assembly

More information

EP Series Sealed Tiny Pushbutton Switches

EP Series Sealed Tiny Pushbutton Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available

More information

EP Series Sealed Tiny Pushbutton Switches

EP Series Sealed Tiny Pushbutton Switches Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant

More information

Telecommunication equipment, Railway( semaphore) system

Telecommunication equipment, Railway( semaphore) system Anti-Sulfur Array Chip Resistor STA Series Application Features Industrial control system,sensor,fan,netcom Station Small size and light weight Navigation equipment Reliability, high quality Measuring

More information

WR02X(W) ±5%, ±1% RoHS compliant and Lead content 100ppm General purpose chip resistors Size 0201

WR02X(W) ±5%, ±1% RoHS compliant and Lead content 100ppm General purpose chip resistors Size 0201 WR02X(W) ±5%, ±1% RoHS compliant and Lead content 100ppm General purpose chip resistors Size 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WR02X_TR_V02 Jul -

More information

2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description

2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free

More information

High Power Chip Resistor

High Power Chip Resistor Description: The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top

More information

WF12H, WF08H, WF06H, WF04H ±0.5% High precision chip resistors Size 1206, 0805, 0603, 0402

WF12H, WF08H, WF06H, WF04H ±0.5% High precision chip resistors Size 1206, 0805, 0603, 0402 WF12H, WF08H, WF06H, WF04H ±0.5% High precision chip resistors Size 1206, 0805, 0603, 0402 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WFxxHD ±0.5% Ver.13 March.-2010 FEATURE

More information

EP Series Sealed Tiny Pushbutton Switches

EP Series Sealed Tiny Pushbutton Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available

More information

WR18, WR20, WR25 ±1%, ±5% Power chip resistors Size 1218,2010,2512

WR18, WR20, WR25 ±1%, ±5% Power chip resistors Size 1218,2010,2512 WR18, WR20, WR25 ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18, WR20, WR25 Version 3 Oct.-2004 FEATURE 1. High power rating

More information

Power Resistor Series

Power Resistor Series Version: February 24, 2017 Power Resistor Series Web: www.token.com.tw Email: rfq@token.com.tw Token Electronics Industry Co., Ltd. Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei City,

More information

(RMG50) TO-220 Low-Profile Power Resistors. Token Electronics Industry Co., Ltd. Version: January 12, Web:

(RMG50) TO-220 Low-Profile Power Resistors. Token Electronics Industry Co., Ltd. Version: January 12, Web: Version: January 12, 2017 (RMG50) TO-220 Low-Profile Power Resistors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,

More information

WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive)

WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive) WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive) *Contents in this sheet are subject to change without prior notice. Page

More information

The ASPIAIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up TOLERANCE M: ±20%

The ASPIAIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up TOLERANCE M: ±20% SERIES DESCRIPTION The SPIIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up FETURES PPLICTIONS PPP ready and supported Excellent current

More information