1.5KE SERIES Taiwan Semiconductor

Transcription

1 Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from 0 volt to VBR for unidirectional and 5.0ns for bidirectional - Typical IR less than 1μA above 10V - UL recognized file # E Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC definition MECHANICAL DATA Case: DO-201 Molding compound, UL flammability classification rating 94V-0 Base P/N with suffix "G" on packing code - green compound (halogen-free) Base P/N with prefix "H" on packing code - AEC-Q101 qualified Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 1A whisker test, with prefix "H" on packing code meet JESD 201 class 2 whisker test Weight: 0.94g (approximately) DO-201 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (T A =25 unless otherwise noted) PARAMETER SYMBOL VALUE Peak power dissipation at T A =25, Tp=1ms (Note 1) 1500 Steady state power dissipation at T L =75 lead lengths.375", 9.5mm (Note 2) Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at 50 A for Unidirectional Only (Note 3) P PK P D T J T STG UNIT Watts Watts I FSM 200 A 5 V F 3.5 / 5.0 Volts Operating junction temperature range - 55 to +175 Storage temperature range - 55 to +175 Note 1: Non-repetitive Current Pulse Per Fig. 3 and Derated above T A =25 Per Fig. 2 Note 2: Mounted on Copper Pad Area of 0.6" x 0.6" (16mm x 16mm) Note 3: V F =3.5V for Devices of V BR 200V and V F =5.0V Max. for Devices V BR >200V O C O C Devices for Bipolar Applications 1. For Bidrectional Use C or CA Suffix for Types 1.5KE6.8 through Types 1.5KE Electrical Characterstics Apply in Both Directions ORDERING INFORMATION PART NO. AEC-Q101 QUALIFIED 1.5KExxxx (Note 1) Prefix "H" PACKING CODE Note 1: "xxxx" defines voltage from 6.8V (1.5KE6.8) to 440V (1.5KE440) GREEN COMPOUND CODE PACKAGE PACKING A0 DO / Ammo box R0 Suffix "G" DO-201 1,250 / 13" Paper reel B0 DO / Bulk packing EXAMPLE PREFERRED P/N 1.5KEA R0 1.5KEA R0G 1.5KEAHR0 PART NO. 1.5KEA 1.5KEA 1.5KEA AEC-Q101 QUALIFIED H PACKING CODE R0 R0 R0 GREEN COMPOUND G DESCRIPTION Green compound AEC-Q101 qualified

2 RATINGS AND CHARACTERISTICS CURVES (TA=25 unless otherwise noted) P PPM, PEAK PULSE POWER, kw FIG. 1 PEAK PULSE POWER RATING CURVE tp, PULSE WIDTH, (μs) NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 PEAK PULSE POWER(P PP ) OR CURRENT (I PP ) A DERATING IN PERCENTAGE (%) FIG.2 PULSE DERATING CURVE With heat sink Without heat sink T A, AMBIENT TEMPERATURE ( o C) PEAK PULSE CURRENT (%) td FIG. 3 CLAMPING POWER PULSE WAVEFORM tr=10μs Peak Value IPPM PULSE WIDTH(td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% OF IPPM Half Value-IPPM/2 10/0μs, WAVEFORM as DEFINED by R.E.A t, TIME ms IFSM, PEAK FORWARD SURGE CURRENT (A) FIG. 4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY 8.3ms Single Half Sine Wave JEDEC Method 1 10 NUMBER OF CYCLES AT 60 Hz FIG. 5 TYPICAL JUNCTION CAPACITANCE CJ, JUNCTION CAPACITANCE (pf) A f=1.0mhz Vsig=50mVp-p VR-RATED STAND-OFF VOLTAGE UNIDIRECTIONAL BIDRECTIONA 1 10 V( BR ), BREAKDOWN VOLTAGE (V) VR=0

3 Breakdown Voltage Test Stand-Off Maximum Maximum Maximum Maximum JEDEC GENERAL Nominal V BR (V) Current Voltage Reverse Leakage Peak Pulse Clamping Voltage Temperature TYPE PART Voltage NUMBER NUMBER (Note 1) I T V V WM Current I I PPM Coefficient V Min Max (ma) (V) I D (μa) (A) (Note 2) Vc(V) of V BR (%/ ) 1N KE N6267A 1.5KE6.8A N KE N6268A 1.5KE7.5A N KE N6269A 1.5KE8.2A N KE N6270A 1.5KE9.1A N KE N6271A 1.5KE10A N KE N6272A 1.5KE11A N KE N6273A 1.5KE12A N KE N6274A 1.5KE13A N KE N6275A 1.5KE15A N KE N6276A 1.5KE16A N KE N6277A 1.5KE18A N KE N6278A 1.5KE20A N KE N6279A 1.5KE22A N KE N6280A 1.5KE24A N KE N6281A 1.5KE27A N KE N6282A 1.5KE30A N KE N6283A 1.5KE33A N KE N6284A 1.5KE36A N KE N6285A 1.5KE39A N KE N6286A 1.5KE43A N KE N6287A 1.5KE47A N KE N6288A 1.5KE51A N KE N6289A 1.5KE56A

4 Breakdown Voltage Test Stand-Off Maximum Maximum Maximum Maximum JEDEC GENERAL Nominal V BR (V) Current Voltage Reverse Leakage Peak Pulse Clamping Voltage Temperature TYPE PART Voltage NUMBER NUMBER (Note 1) I T V V WM Current I I PPM Coefficient V Min Max (ma) (V) I D (μa) (A) (Note 2) Vc(V) of V BR (%/ ) 1N KE N6290A 1.5KE62A N KE N6291A 1.5KE68A N KE N6292A 1.5KE75A N KE N6293A 1.5KE82A N KE N6294A 1.5KE91A N KE N6295A 1.5KEA N KE N6296A 1.5KE110A N KE N6297A 1.5KE120A N KE N6298A 1.5KE130A N KE N6299A 1.5KE150A N KE N6300A 1.5KE160A N KE N6301A 1.5KE170A N KE N6302A 1.5KE180A N KE N6303A 1.5KE200A KE KE220A KE KE250A KE KE300A KE KE350A KE KE400A KE KE440A Notes: 1. V BR measure after IT applied for 300 μs, IT=square wave pulse or equivalent. 2. Surge current waveform per Figure. 3 and derate per Figure For bipolar types having V WM of 10 volts and under, the I D limit is doubled. 4. All terms and symbols are consistent with ANSI/IEEE C62.35.

5 PACKAGE OUTLINE DIMENSIONS DIM. Unit (mm) Unit (inch) Min Max Min Max A B C D E MARKING DIAGRAM P/N G YWW F = Specific Device Code = Green Compound = Date Code = Factory Code

6 Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied,to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or seling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale.