No. Test Requirement Test Condition Test Reference. 10 cycles
|
|
- Loraine Boyd
- 5 years ago
- Views:
Transcription
1 *RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL listed n RoHS compliant* and halogen free** n Wire core SMD design n Surface mount packaging for automated assembly SF-1210SxxxW Series - Slow Blow Wire Core Surface Mount Fuses Electrical Characteristics Rated Current Resistance Rated Interrupting Typical Model Fusing Time (Amps) (Ω) Typ.*** Voltage Rating I 2 t (A 2 s) **** SF-1210S100W SF-1210S150W Open within AC 125 V 100 A SF-1210S200W sec. at 250 % AC 125 V 0.90 DC 65 V 100 A SF-1210S250W rated current SF-1210S300W *** Resistance value measured with 10 % rated current at 25 C ambient. **** Melting I 2 t calculated at second pre-arcing time. Reliability Testing No. Test Requirement Test Condition Test Reference 1 Reflow and bend DCR change 20 % ( 10 % for 1 A) 3 reflows at 245 C followed by a 2 mm bend 2 Solderability Minimum 90 % coverage One dip at 245 C for 5 seconds 3 Soldering heat resistance 4 Moisture resistance 5 Salt spray 6 Mechanical vibration 7 Mechanical shock 8 Thermal Shock 9 Life DCR change 20 % ( 10 % for 1 A) New solder coverage 75 % DCR change ±15 % No excessive corrosion No excessive corrosion No electrical opens during testing Voltage drop change shall be less than ±20 % of initial value One dip at 260 C for 10 seconds 10 cycles 48 hour exposure, 5 % salt solution 0.4 inch D.A. or 30 G between Hz 1500 G, 0.5 ms, half-sine shocks Refer to STP document Method 208 Method 210 Method 106 Method 101 Method 204 Method cycles between -65 C and +125 C Method % rated current (75 % for < 1 A fuses) for 2000 hours at ambient temperature +25 C Refer to STP document Agency Recognition UL File Number... E Follow link to Online Certificates Directory, then enter UL File No. E198545, or click here Asia-Pacific: Tel: asiacus@bourns.com EMEA: Tel: eurocus@bourns.com The Americas: Tel: americus@bourns.com *RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be halogen free if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. SinglFuse is a trademark of Bourns, Inc.
2 SinglFuse SF-1210SxxxW Series Applications n White goods n Lighting and drivers n DC/DC converters n Low voltage power and chargers n Industrial equipment SF-1210SxxxW Series - Slow Blow Wire Core Surface Mount Fuses Environmental Characteristics Operating Temperature C to +125 C Storage Conditions Temperature C to +35 C Humidity...40 % to 75 % Shelf Life...2 years from manufacturing date Moisture Sensitivity Level... 1 ESD Classification (HBM)... Class 6 Typical Part Marking Represents total content. Layout may vary. G RATED CURRENT (A) E = 1.00 J = 2.50 G = 1.50 K = 3.00 I = 2.00 How to Order SinglFuse Product Designator SMD Footprint 1210 = 3225 (EIA 1210) size Fuse Blow Type S = Slow Blow Rated Current 100 ~ 300 (1.00 A ~ 3.00 A) Structure Type W = Wire Core Packaging Type - 2 = Tape & Reel SF S 150 W - 2 Construction FUSE ELEMENT (Cu or Cu alloy) Packaging Quantity FR4 PCB TERMINAL Cu/Ni/Sn 2,500 pieces per 7-inch reel Product Dimensions Recommended Pad Layout 3.20 ± 0.40 (.126 ±.016) DIMENSIONS: MM (INCHES) 1.70 (.070) 2.50 ± 0.20 (.098 ±.008) 1.60 ± 0.20 (.063 ±.008) 2.70 (.110) 4.40 (.170)
3 SF-1210SxxxW Series - Slow Blow Wire Core Surface Mount Fuses Solder Reflow Recommendations TEMPERATURE ( C) T p T L 25 T smax T smin MAX. RAMP UP RATE = 3 C/s MAX. RAMP DOWN RATE = 6 C/s PREHEAT AREA t s TIME 25 C TO PEAK t L t p T c -5 C Profile Feature Preheat / Soak: Temperature Min. (T smin ) Temperature Max. (T smax ) Time (t s ) from (T smin to T smax ) Ramp Up Rate (T L to T p ) Pb-Free Assembly 150 C 200 C 60~120 seconds 3 C / second max. Liquidous Temperature (T L ) 217 C Time (t L ) maintained above T L 60~150 seconds Peak Package Body Temperature (T p ) Time (t p )* within 5 C of the specified classification temperature (T c ) 260 C 30 seconds* TIME Ramp Down Rate (T p to T L ) 6 C / second max. Time 25 C to Peak Temperature 8 minutes max. * Tolerance for peak profile temperature (Tp ) is defined as a supplier minimum and a user maximum. Recommended Temperature Profile for Wave Soldering sec. max. Wave soldering is suitable for 1210 size models. TEMPERATURE ( C) 150 PREHEATING 120 seconds TIME
4 SF-1210SxxxW mm Series SMD - Slow Trimming Blow Wire Core Potentiometer Surface Mount Fuses Current Rating Thermal Derating Curve DERATING (%) MAXIMUM OPERATING TEMPERATURE ( C) Average Pre-Arcing Time vs. Current Curves Average I 2 t vs. t Curves A 1.50 A 1.00 A 2.50 A 3.00 A A 2.50 A 2.00 A 1.50 A 1.00 A PRE-ARCING TIME (SECONDS) I2t (A2s) CURRENT (A) TIME (SECONDS) REV. A 03/18
5 SF-1210SxxxW mm Series SMD Tape and Trimming Reel Packaging Potentiometer Specifications SF-1210SxxxW Series Tape Dimensions per EIA W 8.00 ± 0.10 (.315 ±.004) P ± 0.10 (.157 ±.004) P ± 0.10 (.157 ±.004) P ± 0.05 (.079 ±.002) A ± 0.10 (.106 ±.004) B ± 0.10 (.138 ±.004) F 3.50 ± 0.05 (.138 ±.002) E ± 0.10 (.069 ±.004) D ( ) K ± 0.10 (.056 ±.004) T 0.23 ± 0.02 (.009 ±.001) PACKAGING: Paper tape, 2,500 pcs. per reel ± 0.50 (.539 ±.020) 2.20 ± 0.30 (.087 ±.012) ± 1.00 (7.008 ±.039) ± 0.50 (2.370 ±.020) /-0.2 ( /-.008) 1.20 ± 0.20 (.047 ±.008) 1.40 ± 0.20 (.055 ±.008) DIMENSIONS: MM (INCHES) E D 0 P 0 P 2 T F W B 0 P 1 A O K O DIRECTION OF UNREELING
SinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics
*RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed
More information0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M
*RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250
More informationSF-0603SP150M SF-0603SP200M SF-0603SP250M
E SinglFuse SF-0603SPxxxM Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Time Lag fuse n UL 248-14 listed n RoHS compliant* and halogen free** n Multilayer
More informationSinglFuse SF-1206HIxxxM Series Features
E SinglFuse SF-1206HIxxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High inrush current withstand fuse n UL 248-14 listed n RoHS compliant* and halogen
More informationSinglFuse SF-1206HVxxM Series Features
*RoHS COMPLIANT & **HALOGEN FREE V SinglFuse SF-1206HVxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High voltage rating applications n High current rating
More informationn For use in telecommunication circuit applications requiring low current protection with high surge tolerance
*RoHS COMPLIANT & **HALOGEN FREE 0.5 SinglFuse SF-3812TM-T Series Features n Replacement for Bourns Telefuse models B0500T, B1250T and B2000T n For use in telecommunication circuit applications requiring
More informationCC06H High I 2 t Chip 0603 size fuses
Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth
More informationSpecification Status: Released
PAGE NO.: 1 OF 7 Termination Material: Copper, Ni, Tin Fuse Element: Copper/Copper alloy Body Material: Fiberglass/Epoxy Operating Temperature -55 C to +125 C (with de-rating) Specification Status: Released
More informationMF-PSMF Series - PTC Resettable Fuses
*RoHS COMPLIANT Features Compact design to save board space - 0805 footprint Small size results in very fast time to react to fault events Symmetrical design Low profile RoHS compliant* and halogen free**
More information6125FF Fast-acting subminiature fuses
Fast-acting subminiature fuses Supersedes March 2015 Applications Power supplies Servers LED/LCD televisions Appliances and white goods LCD monitor/backlight inverters Laptops and notebooks Agency information
More informationCRS-A Series High Power Anti-Surge Resistor
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
More information1025HC Fast-acting, high current, surface mount ceramic tube fuses
Supersedes February 2017 Fast-acting, high current, surface mount ceramic tube fuses HALOGEN HF FREE Applications Primary and secondary circuit protection: Server and desktop power supplies Gaming console
More informationSurface Mount Fuses 0603Size> Slow Blow> S0603-S-5.0A
Page: 1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity RoHS
More informationSurface Mount Fuses 0603Size> Slow Blow> S0603-S Series
Revision:F Page:1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity
More informationSF-0603S Series - Slow Blow Surface Mount Fuses
SinglFuse SF-0603S Series Features n Slow blow thin film chip fuse for overcurrent protection n 608 (EI 0603) miniature footprint n Surface mount packaging for automated assembly n UL listed (UL 248-4)
More informationSRP1238A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 1 µh AEC-Q compliant RoHS compliant* and halogen free** SRP1A Series - Shielded
More informationC308F 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications
Technical Data 4405 Supersedes October 2017 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications Agency information curus Recognition file number: E19180, Guide JDYX2/JDYX8 Applications
More informationSA Series Breaker (Surface Mount Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE S A 0 0 77SB0 X 2 4 6 L Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Surface mount n Overtemperature and overcurrent protection for lithium polymer
More informationSA Series Breaker (Surface Mount Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE S A 0 0 77SB0 X 2 4 6 L Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Surface mount n Overtemperature and overcurrent protection for lithium polymer
More informationSurface Mount Fuses 0603Size> Fast Acting > S0603-F Series
Page:1 of 6 General Fast Acting 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity RoHS
More informationAutomotive Surface Mount Fuses
Revision of November 206 Automotive Surface Mount Fuses Quick Index: Series Size Current Rating (A) Voltage Rating Page 0.5, 0.63, 0.75,.0,.5, 2.0 250VAC/25VDC QA240F 240 QA206F 206 QF206F 206 QF0603F
More informationNR Series Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE 6 7 5 1 1 2 1 5 C N R 7 7 C B 0 1 1 5 5 C N R 7 2 A B 0 Features n Miniature Thermal Cutoff (TCO) device n Smallest body size, high current type n Overtemperature and overcurrent
More informationLC Series Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE 0 8 1 2 2 1 5 IX L C 7 7 AY 1 Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Low current type n Overtemperature and overcurrent protection for
More informationFeatures. V max (Vdc) I max (A) typ. (W) P d
2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationSurface Mount Fuses 0603Size> Slow Blow> S0603-S Series
Measured I I T Surface Mount Fuses age:1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element o o -50 C~125 C operating temperature
More informationSPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES
SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES Table F1 Environmental Specifications for Table F2 Fuses Operating Temperature Mechanical Vibration
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 1206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating,
More informationSurface Mount Fuses 1206 Size >Fast Acting>S1206-FA-8A~15A. General
Page: 1/ 6 General Fastacting 3.10mm 1.55mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -55 ~125 operating temperature Excellent environmental integrity RoHS
More informationFeatures. Samples. I max (A) P d. typ. (W)
0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationSurface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationBourns SinglFuse. Thin Film Chip Fuse. Short Form Brochure
Bourns SinglFuse Thin Film Chip Fuse Short Form Brochure Bourns SinglFuse Products What's New in this Edition SF-0402F Series 0402 fast acting fuses SF-0402S Series 0402 slow blow fuses SF-0603F Series
More informationS505SCH 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses
Technical Data 10401 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED lighting LED/LCD televisions Appliances
More informationSA2 Series High Voltage Gas Discharge Tube
*RoHS COMPLIANT Features n Formerly a n High insulation resistance n Quick response, long service life n Available DC breakdown range: 2.4 kv to 7.2 kv n Wide operating temperature range n RoHS compliant*
More informationSurface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)
1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationPOLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description
2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationFP1008R5 and FP1008R6 High frequency, high current power inductors
Technical Data 152 Effective April 217 FP18R5 and FP18R6 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density
More informationMPI2520 High Current, Low Profile, Miniature Power Inductors HALOGEN FREE
Technical Data 10199 MPI2520 High Current, Low Profile, Product description: Pb Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 2.7 x 2.2 x 1.0 / 1.2mm maximum surface
More informationPLED Ultra Low Holding Current Series
RoHS Description Agency Approvals This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching
More informationSC Series Breaker (Surface Mount Thermal Cutoff Device)
00 SC 7 7 A 4134N Features n Miniature Thermal Cutoff (TCO) device n Surface mount, smallest body size n Overtemperature and overcurrent protection n Controls abnormal, excessive current virtually instantaneously,
More informationSurface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)
1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationLow-Profile, Shielded Drum Core, Tapped Inductor SDT30 Series
Low-Profile, Shielded Drum Core, Tapped Inductor SDT0 Series SMD Device Description Halogen Free Approved for use with Maxim MAX45 chip set 5 C maximum total temperature operation. x. x.0mm shielded drum
More informationSurface-mount Fuses Fundamentals
Surface-mount Fuses Fundamentals Overview TE Circuit Protection offers the widest selection of surface-mount fuses available for addressing a broad range of overcurrent protection applications. Helping
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationNTC Thermistor for Automotive: TSM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. Operating temperature range: -50 ~ +150 3. Superior stability in high-temperature and high-humidity environment 4. RoHS & Halogen Free (HF) compliant
More informationCoiltronics HCM1104 Series High current power inductors
Supersedes March 2012 Coiltronics High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment
More informationCoiltronics HCM0703 Series High current power inductors
Supersedes September, 2010 Coiltronics HCM0703 Series High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs
More informationHigh Current, High Frequency Power Inductors HCM1103 Series
High Current, High Frequency Power Inductors HCM1103 Series HALOGEN HF FREE Pb Description Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 11.5 x 10.3 x 3.0mm maximum
More information2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationMulti-Phase Power Inductors CL0904 Series
Multi-Phase Power Inductors CL0904 Series HALOGEN HF FREE Pb Applications For exclusive use with Volterra VPR-Devices Environmental Data Storage temperature range: -40 C to +125 C Operating temperature
More informationFundamentals. Overview. Multi-layer Design for Chip Fuses. Wire-In-Air Design for 2410SFV, 1206SFV Fuses. Figure SF1. Figure SF2.
Fundamentals Overview TE Circuit Protection offers the widest selection of surfacemount fuses available for addressing a broad range of overcurrent protection applications. Helping to prevent costly damage
More informationPTC Thermistor for Automotive:TPM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics Part Number Code
More informationAutomotive Grade Surface-Mount Fuses
Automotive Grade Surface-Mount Fuses AEC-Q200 qualified TS6949 certified Anti-sulfur construction SolidMatrix Platform, QF series AirMatrix Platform, QA series www.aemcomponents.com / www.aemchina.com
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationPolySwitch Resettable PTCs Surface Mount > LoRho Series. Low Rho SMD Series. Description
Low Rho SMD Series Description PolySwitch low resistivity SMD (surface-mount device) is a versatile device well suited for general applications which have space-constrained, low power dissipation and high
More informationLow profile Fast response to fault current Compatible with high temperature solders
Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable for ultra portable applications where space
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationCurrent Sensing Resistor Metal Foil Type >SMF Series
Page: 1 of 6 General Chip size from 0603 to Resistance value from 3mΩ to 200mΩ Low thermal EMF. Low TCR. Lead free, RoHS compliant for global applications and halogen free Application Switching model power
More informationMulti-Phase Power Inductors CPL, CPLA & CPLE Series
Multi-Phase Power Inductors CPL, CPLA & CPLE Series HALOGEN HF FREE Pb SMD Device Description Halogen Free CPLA Series features acoustic noise dampening properties CPLE Series features optimized core material
More informationPTC Thermistor for Automotive:TPM-C Series
SMD PTC Thermistor for Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics
More informationTransient Voltage Suppression Diodes SMTO ka > LTKAK6 series. Description. Features. Test Current I T. Reverse Breakdown Voltage (V BR I T
SMTO-218-6 ka > LTKAK6 series LTKAK6 Series RoHS Pb e3 Description The LTKAK6 series offers superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology,
More informationCCFL Transformers Cold cathode fluorescent lamp inverter transformers
Supersedes March 2007 Cold cathode fluorescent lamp inverter transformers Applications CCFL power supplies Environmental data Storage temperature range: -40 C to +85 C Operating ambient temperature range:
More informationS505SC 5 x 20 mm Time-delay, axial lead ceramic tube fuses
Supersedes September 2013 5 x 20 mm Time-delay, axial lead ceramic tube fuses Pb Product description Time-delay, high breaking capacity Designed to IEC 60127-2 Nickel-plated brass end cap construction
More informationPositive Temperature Coefficient (PTC) Data Sheet
Positive Temperature Coefficient (PTC) Data Sheet Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1)
SIDACtor Series - DO-214 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides
More informationGas Discharge Tube (GDT) Products CG/CG2 Series. CG/CG2 Series
Description Littelfuse highly reliable GDTs provide a high degree of surge protection in a small size ideal for board level circuit protection. GDTs function as switches which dissipate a minimum amount
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationDear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955
Littelfuse, Inc. 8755 West Higgins Road, Suite 5 Chicago, IL 6631 USA (773) 628-1 7.1,218 RE: LFPCN41214 From: Littelfuse Product Management Team Dear Customer, Please be aware that Littelfuse is discontinuing
More informationC310FH 3.1 mm x 10 mm Fast-acting, axial lead ceramic tube fuses
Technical Data 10405 3.1 mm x 10 mm Fast-acting, axial lead ceramic tube fuses Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED and general lighting Consumer electronics Desktop,
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
More informationSpecification. N1206 F Series. Approved by. Date of Establish : (Ref. No : 1206 F_Rev.2)
Specification Product Type SMD(Micro) Fuse N1206 F Series Approved by Date of Establish : 2012.11.01(Ref. No : 1206 F_Rev.2) 1. Scope This specification covers the detail requirements for SMD Micro fuse
More informationCPTC Thermistor:TPM-P Type
CPTC Thermistor:TPM-P Type Features 1. RoHS & Halogen-free compliant 2. EIA size 63,85,121 3. Suitable for reflow soldering 4. Suitable for over-current or short circuit protection 5. Agency Recognition:
More informationCYG Wayon Circuit Protection CO., LTD.
CATALOG (2014) CYG Wayon Circuit Protection CO., LTD. CONTENTS Surface Mount Fuses 1206F Series. 2 0603F Series.5 1206S Series.8 0603S Series.11 Applications..14 Product Identification...14 Reliability
More informationFeatures. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B
RoHS Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description
SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series
More informationPOLY-FUSE Resettable PTCs Surface Mount > 1206L Series
Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
More informationAutomotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
More informationFUZETEC TECHNOLOGY CO., LTD.
NO. PQ18-01ER Product Specification and Approval Sheet Version A9 Page 1/5 Surface Mountable PTC Resettable Fuse: FSMD1206 Series 1. Summary (a) RoHS Compliant & Halogen Free (b) Applications: All high-density
More informationNTC Thermistor:TSM Series
Features 1. RoHS & HF compliant 2. EIA size: 0201, 0402, 0603, 0805 3. Highly reliable structure 4. Operating temperature range: -40 ~ +125 5. Wide resistance range 6. Cost effective 7. Agency recognition:
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationTablet PC Automotive applications Printer Security systems VOP (V) Ibreak (A)
Description Current Limiting Module (CLM) is a chip type surface mountable device that can protect against both overcurrent and overcharging. It comprises a fuse element to ensure stable operation under
More informationKomatsulite HC Series Breaker
*RoHS COMPLIANT & **HALOGEN FREE 33 11515 V HC82AY 1 Features High current type Overtemperature and overcurrent protection for lithium polymer and prismatic cells Controls abnormal, excessive current instantaneously
More informationSST-10-R. Red LED. SST-10-Red Product Datasheet. Features: Table of Contents. Applications
SST-10-R Red LED Features: Table of Contents SST-10 Binning Structure...2 Product Shipping & Labeling Information...3 Optical and Electrical Characteristics...4 High Power Red LED with Peak Wavelength
More informationWW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive)
WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive) *Contents in this sheet are subject to change without prior notice. Page
More informationKCA Series A-Type Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n High current type n Optimal corrosion resistant properties n Smaller body size: L5.4 x W3.2 x H0.89
More informationRadial Leaded > 72R Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
72R Series RoHS * Description The 72R Series is designed to provide overcurrent protection to 72Vdc maximum voltage with a maximum 40A short circuit rating. Features 72Vdc max voltage w/max 40A short circuit
More informationGas Discharge Tubes SL1002A Series
SL12A Series SL12A Series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Additional Information Description The Broadband Optimized SL12A series has been especially
More informationNXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationTVS Diode Arrays (SPA Diodes) SP2502L Series 3.3V 75A Diode Array. Lightning Surge Protection - SP2502L Series. RoHS Pb GREEN.
SP202L Series 3.3V 7A Diode Array RoHS Pb GREEN Description The SP202L provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationShielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
More informationWLFI1608 Ferrite Chip Inductors
WLFI1608 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI1608 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
More informationNXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
More informationMeiLong Electronic Co.,Ltd. Lead Free Thin Film Chip Fuse. 1. Scope. 2. Construction. 3. Type Designation. Over Coat Conductor.
Lead Free Thin Film Chip Fuse Page 1/20 1. Scope This specification applies for the Lead-Free fuse se ries of thin film chip fuse made by ML. 2. Construction Over Coat Conductor Sn Plating Ceramic Substrate
More informationSURFACE-MOUNT FUSES Slow-Blow Chip Fuses
SURFACE-MOUNT FUSES Available in industry standard 206 and 0603 chip sizes, Littelfuse slow-blow chip fuses help provide overcurrent protection on systems that experience large and frequent current surges
More informationSURFACE-MOUNT FUSES Slow-Blow Chip Fuses
SURFACE-MOUNT FUSES Available in industry standard 206 and 0603 chip sizes, Littelfuse slow-blow chip fuses help provide overcurrent protection on systems that experience large and frequent current surges
More informationNXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
More informationPower Splitter/Combiner
Ultra-Small Ceramic Power Splitter/Combiner 2 Way-90 50Ω 2500 to 4500 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Power Input (as a splitter) 15W* max. *
More informationMulti-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
More informationS J
1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V
More information