0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M

Size: px
Start display at page:

Download "0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M"

Transcription

1 *RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250 % rated current) n UL listed n Surface mount packaging for automated assembly n Multilayer SMD design n RoHS compliant* and halogen free** SF-0603SxxxM Series - Slow Blow Multilayer Surface Mount Fuses Electrical Characteristics Model Rated Current Resistance Rated Interrupting Typical Fusing Time (Amps) (Ω) Typ.*** Voltage Rating I 2 t (A 2 s) **** SF-0603S050M SF-0603S075M DC 63 V DC 63 V SF-0603S00M A 0.03 SF-0603S50M SF-0603S200M Open within 5 SF-0603S250M sec. at 250 % SF-0603S300M rated current DC 32 V 0.80 DC 32 V SF-0603S350M A SF-0603S400M SF-0603S500M SF-0603S600M DC 24 V DC 24 V 35 A.00 *** Resistance value measured with 0 % rated current at 25 C ambient. ****Melting I 2 t calculated at 0.00 second pre-arcing time. Reliability Testing No. Test Requirement Test Condition Test Reference Soldering heat resistance One dip at 260 C for 60 seconds 2 Solderability Minimum 95 % coverage One dip at 245 C for 5 seconds 3 Thermal shock 4 Moisture resistance 5 Salt spray 6 Mechanical vibration 7 Mechanical shock 8 Life DCR change ±5 % No excessive corrosion No excessive corrosion No electrical opens during testing. Voltage drop change shall be less than ±20 % of initial value. 00 cycles between -65 C and +25 C 0 cycles 48 hour exposure, 5 % salt solution 0.4 inch D.A. or 30 G between Hz 500 G, 0.5 ms, half-sine shocks 80 % rated current (75 % for A fuses) for 2000 hours at ambient temperature +20 C ~ +30 C 9 Terminal strength 0.5 Kg pushing force Method 20 Method 208 Method 07 Method 06 Method 0 Method 204 Method 23 Refer to STP document Refer to STP document Environmental Characteristics Operating Temperature C to +25 C Storage Conditions Temperature...+5 C to +35 C Humidity % to 75 % Shelf Life... 2 years from manufacturing date Moisture Sensitivity Level... ESD Classification (HBM)...Class 6 Agency Recognition UL File Number... E Follow link to Online Certificates Directory, then enter UL File No. E98545, or click here * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 20/65/EU June 8, 20. ** Bourns considers a product to be halogen free if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 500 ppm or less. SinglFuse is a trademark of Bourns, Inc. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Asia-Pacific: Tel: asiacus@bourns.com EMEA: Tel: eurocus@bourns.com The Americas: Tel: americus@bourns.com

2 SinglFuse SF-0603SxxxM Series Applications n Portable memory n LCD monitors n Disk drives n PDAs n Digital cameras n MP3 players n Cell phones n Rechargeable battery packs n Battery chargers n Set-top boxes n Industrial controllers n Battery Management Systems (BMS) n LED lighting n Power tools SF-0603SxxxM Series - Slow Blow Multilayer Surface Mount Fuses Typical Part Marking Represents total content. Layout may vary. E RATED CURRENT (A) C = 0.50 K = 3.00 D = 0.75 L = 3.50 E =.00 M = 4.00 G =.50 N = 5.00 I = 2.00 O = 6.00 J = 2.50 How to Order SF S 00 M - 2 SinglFuse Product Designator SMD Footprint 0603 = 608 (EIA 0603) size Fuse Blow Type S = Slow blow Rated Current (0.50 A A) Structure M = Multilayer Packaging Type - 2 = Tape & Reel Construction Packaging Quantity MASKING LAYER MARKING FUSE ELEMENT CERAMIC BODY TERMINATION MARKING MASKING LAYER...4,000 pieces per 7 inch reel Product Dimensions.6 ± 0.5 (.063 ±.006) (.03 ±.006) Recommended Pad Layout 0.80 (.03) (.03 ±.006) (.03 ±.006).00 (.039) 0.36 ± 0.5 (.04 ±.006) DIMENSIONS: MM (INCHES) 2.20 (.087) Current Rating Thermal Derating Curve DERATING (%) MAXIMUM OPERATING TEMPERATURE ( C)

3 SF-0603SxxxM Series - Slow Blow Multilayer Surface Mount Fuses Solder Reflow Recommendations T p T L T smax MAX. RAMP UP RATE = 3 C/s MAX. RAMP DOWN RATE = 6 C/s PREHEAT AREA t L t p T c -5 C Profile Feature Preheat / Soak: Temperature Min. (T smin ) Temperature Max. (T smax ) Time (t s ) from (T smin to T smax ) Ramp Up Rate (T L to T p ) Pb-Free Assembly 50 C 200 C 60~20 seconds 3 C / second max. TEMPERATURE ( C) 25 T smin t s Liquidous Temperature (T L ) 27 C Time (t L ) maintained above T L 60~50 seconds Peak Package Body 260 C Temperature (T p ) Time (t p )* within 5 C of the specified classification temperature 30 seconds* (T c ) TIME 25 C TO PEAK TIME Ramp Down Rate (T p to T L ) Time 25 C to Peak Temperature 6 C / second max. 8 minutes max. *Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum. Recommended Temperature Profile for Wave Soldering sec. max. Wave soldering is suitable for 0603 size models. TEMPERATURE ( C) 50 PREHEATING 20 seconds TIME

4 SF-0603SxxxM Series - Slow Blow Multilayer Surface Mount Fuses Average Pre-Arcing Time Curves Average I 2 t vs. t Curves 2.50 A 2.00 A.50 A.00 A 0.75 A 0.50 A 3.50 A 4.00 A 5.00 A 6.00 A PRE-ARCING TIME (SECONDS) I 2 t (A 2 s) A 5.00 A 3.50 A 2.50 A 2.00 A.50 A.00 A 0.75 A 0.50 A CURRENT (A) TIME (SECONDS) REV. B 02/8/8

5 SF-0603SxxxM Series Tape and Reel Specifications SF-0603SxxxM Series Tape Dimensions per EIA 48-2 W 8.00 ± 0.0 (.35 ±.004) P ± 0.0 (.57 ±.004) P 2.0 ± 0.05 (.079 ±.002) P ± 0.05 (.079 ±.002) A 0.00 ± 0.0 (.039 ±.004) B 0.80 ± 0.0 (.07 ±.004) F 3.5 ± 0.05 (.38 ±.002) E.75 ± 0.0 (.069 ±.004) D ( ) T 0.95 ± 0.08 (.037 ±.003) PACKAGING: Paper tape, 4,000 pcs. per reel DIMENSIONS: MM (INCHES) 3.40 ± 0.50 (.539 ±.020) 2.20 ± 0.30 (.087 ±.02) ±.00 (7.008 ±.039) ± 0.50 (2.370 ±.020) /-0.2 ( /-.008).20 ± 0.20 (.047 ±.008).40 ± 0.20 (.055 ±.008) T P O 0 P O D O E COVER TAPE F W B 0 P P 2 DIRECTION OF UNREELING A O

SinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics

SinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics *RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed

More information

SF-0603SP150M SF-0603SP200M SF-0603SP250M

SF-0603SP150M SF-0603SP200M SF-0603SP250M E SinglFuse SF-0603SPxxxM Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Time Lag fuse n UL 248-14 listed n RoHS compliant* and halogen free** n Multilayer

More information

No. Test Requirement Test Condition Test Reference. 10 cycles

No. Test Requirement Test Condition Test Reference. 10 cycles *RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL 248-14 listed n RoHS compliant* and

More information

SinglFuse SF-1206HIxxxM Series Features

SinglFuse SF-1206HIxxxM Series Features E SinglFuse SF-1206HIxxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High inrush current withstand fuse n UL 248-14 listed n RoHS compliant* and halogen

More information

SinglFuse SF-1206HVxxM Series Features

SinglFuse SF-1206HVxxM Series Features *RoHS COMPLIANT & **HALOGEN FREE V SinglFuse SF-1206HVxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High voltage rating applications n High current rating

More information

n For use in telecommunication circuit applications requiring low current protection with high surge tolerance

n For use in telecommunication circuit applications requiring low current protection with high surge tolerance *RoHS COMPLIANT & **HALOGEN FREE 0.5 SinglFuse SF-3812TM-T Series Features n Replacement for Bourns Telefuse models B0500T, B1250T and B2000T n For use in telecommunication circuit applications requiring

More information

CC06H High I 2 t Chip 0603 size fuses

CC06H High I 2 t Chip 0603 size fuses Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth

More information

MF-PSMF Series - PTC Resettable Fuses

MF-PSMF Series - PTC Resettable Fuses *RoHS COMPLIANT Features Compact design to save board space - 0805 footprint Small size results in very fast time to react to fault events Symmetrical design Low profile RoHS compliant* and halogen free**

More information

SF-0603S Series - Slow Blow Surface Mount Fuses

SF-0603S Series - Slow Blow Surface Mount Fuses SinglFuse SF-0603S Series Features n Slow blow thin film chip fuse for overcurrent protection n 608 (EI 0603) miniature footprint n Surface mount packaging for automated assembly n UL listed (UL 248-4)

More information

Bourns SinglFuse. Thin Film Chip Fuse. Short Form Brochure

Bourns SinglFuse. Thin Film Chip Fuse. Short Form Brochure Bourns SinglFuse Thin Film Chip Fuse Short Form Brochure Bourns SinglFuse Products What's New in this Edition SF-0402F Series 0402 fast acting fuses SF-0402S Series 0402 slow blow fuses SF-0603F Series

More information

SolidMatrix 1206 Fast Acting Surface Mount Fuses

SolidMatrix 1206 Fast Acting Surface Mount Fuses SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing

More information

6125FF Fast-acting subminiature fuses

6125FF Fast-acting subminiature fuses Fast-acting subminiature fuses Supersedes March 2015 Applications Power supplies Servers LED/LCD televisions Appliances and white goods LCD monitor/backlight inverters Laptops and notebooks Agency information

More information

Specification Status: Released

Specification Status: Released PAGE NO.: 1 OF 7 Termination Material: Copper, Ni, Tin Fuse Element: Copper/Copper alloy Body Material: Fiberglass/Epoxy Operating Temperature -55 C to +125 C (with de-rating) Specification Status: Released

More information

SRP1238A Series - Shielded Power Inductors

SRP1238A Series - Shielded Power Inductors *RoHS and AEC-Q COMPLIANT Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 1 µh AEC-Q compliant RoHS compliant* and halogen free** SRP1A Series - Shielded

More information

Surface Mount Fuses 0603Size> Slow Blow> S0603-S-5.0A

Surface Mount Fuses 0603Size> Slow Blow> S0603-S-5.0A Page: 1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity RoHS

More information

Surface Mount Fuses 0603Size> Slow Blow> S0603-S Series

Surface Mount Fuses 0603Size> Slow Blow> S0603-S Series Revision:F Page:1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity

More information

1025HC Fast-acting, high current, surface mount ceramic tube fuses

1025HC Fast-acting, high current, surface mount ceramic tube fuses Supersedes February 2017 Fast-acting, high current, surface mount ceramic tube fuses HALOGEN HF FREE Applications Primary and secondary circuit protection: Server and desktop power supplies Gaming console

More information

C308F 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications

C308F 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications Technical Data 4405 Supersedes October 2017 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications Agency information curus Recognition file number: E19180, Guide JDYX2/JDYX8 Applications

More information

SA Series Breaker (Surface Mount Thermal Cutoff Device)

SA Series Breaker (Surface Mount Thermal Cutoff Device) *RoHS COMPLIANT & **HALOGEN FREE S A 0 0 77SB0 X 2 4 6 L Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Surface mount n Overtemperature and overcurrent protection for lithium polymer

More information

NR Series Breaker (Thermal Cutoff Device)

NR Series Breaker (Thermal Cutoff Device) *RoHS COMPLIANT & **HALOGEN FREE 6 7 5 1 1 2 1 5 C N R 7 7 C B 0 1 1 5 5 C N R 7 2 A B 0 Features n Miniature Thermal Cutoff (TCO) device n Smallest body size, high current type n Overtemperature and overcurrent

More information

SA Series Breaker (Surface Mount Thermal Cutoff Device)

SA Series Breaker (Surface Mount Thermal Cutoff Device) *RoHS COMPLIANT & **HALOGEN FREE S A 0 0 77SB0 X 2 4 6 L Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Surface mount n Overtemperature and overcurrent protection for lithium polymer

More information

Surface Mount Fuses 0603Size> Fast Acting > S0603-F Series

Surface Mount Fuses 0603Size> Fast Acting > S0603-F Series Page:1 of 6 General Fast Acting 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity RoHS

More information

LC Series Breaker (Thermal Cutoff Device)

LC Series Breaker (Thermal Cutoff Device) *RoHS COMPLIANT & **HALOGEN FREE 0 8 1 2 2 1 5 IX L C 7 7 AY 1 Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Low current type n Overtemperature and overcurrent protection for

More information

CRS-A Series High Power Anti-Surge Resistor

CRS-A Series High Power Anti-Surge Resistor *RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*

More information

Features. Samples. I max (A) P d. typ. (W)

Features. Samples. I max (A) P d. typ. (W) 0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

Surface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)

Surface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) 0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)

Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.) 1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

SA2 Series High Voltage Gas Discharge Tube

SA2 Series High Voltage Gas Discharge Tube *RoHS COMPLIANT Features n Formerly a n High insulation resistance n Quick response, long service life n Available DC breakdown range: 2.4 kv to 7.2 kv n Wide operating temperature range n RoHS compliant*

More information

Automotive Surface Mount Fuses

Automotive Surface Mount Fuses Revision of November 206 Automotive Surface Mount Fuses Quick Index: Series Size Current Rating (A) Voltage Rating Page 0.5, 0.63, 0.75,.0,.5, 2.0 250VAC/25VDC QA240F 240 QA206F 206 QF206F 206 QF0603F

More information

SolidMatrix 1206 Fast Acting Surface Mount Fuses

SolidMatrix 1206 Fast Acting Surface Mount Fuses SolidMatrix 1206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating,

More information

Surface Mount Fuses 1206 Size >Fast Acting>S1206-FA-8A~15A. General

Surface Mount Fuses 1206 Size >Fast Acting>S1206-FA-8A~15A. General Page: 1/ 6 General Fastacting 3.10mm 1.55mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -55 ~125 operating temperature Excellent environmental integrity RoHS

More information

Features. V max (Vdc) I max (A) typ. (W) P d

Features. V max (Vdc) I max (A) typ. (W) P d 2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free

More information

Surface Mount Fuses 0603Size> Slow Blow> S0603-S Series

Surface Mount Fuses 0603Size> Slow Blow> S0603-S Series Measured I I T Surface Mount Fuses age:1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element o o -50 C~125 C operating temperature

More information

S505SCH 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses

S505SCH 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses Technical Data 10401 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED lighting LED/LCD televisions Appliances

More information

Automotive Grade Surface-Mount Fuses

Automotive Grade Surface-Mount Fuses Automotive Grade Surface-Mount Fuses AEC-Q200 qualified TS6949 certified Anti-sulfur construction SolidMatrix Platform, QF series AirMatrix Platform, QA series www.aemcomponents.com / www.aemchina.com

More information

POLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description

POLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description 2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free

More information

Surface-mount Fuses Fundamentals

Surface-mount Fuses Fundamentals Surface-mount Fuses Fundamentals Overview TE Circuit Protection offers the widest selection of surface-mount fuses available for addressing a broad range of overcurrent protection applications. Helping

More information

CYG Wayon Circuit Protection CO., LTD.

CYG Wayon Circuit Protection CO., LTD. CATALOG (2014) CYG Wayon Circuit Protection CO., LTD. CONTENTS Surface Mount Fuses 1206F Series. 2 0603F Series.5 1206S Series.8 0603S Series.11 Applications..14 Product Identification...14 Reliability

More information

SC Series Breaker (Surface Mount Thermal Cutoff Device)

SC Series Breaker (Surface Mount Thermal Cutoff Device) 00 SC 7 7 A 4134N Features n Miniature Thermal Cutoff (TCO) device n Surface mount, smallest body size n Overtemperature and overcurrent protection n Controls abnormal, excessive current virtually instantaneously,

More information

MPI2520 High Current, Low Profile, Miniature Power Inductors HALOGEN FREE

MPI2520 High Current, Low Profile, Miniature Power Inductors HALOGEN FREE Technical Data 10199 MPI2520 High Current, Low Profile, Product description: Pb Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 2.7 x 2.2 x 1.0 / 1.2mm maximum surface

More information

Low profile Fast response to fault current Compatible with high temperature solders

Low profile Fast response to fault current Compatible with high temperature solders Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable for ultra portable applications where space

More information

Positive Temperature Coefficient (PTC) Data Sheet

Positive Temperature Coefficient (PTC) Data Sheet Positive Temperature Coefficient (PTC) Data Sheet Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable

More information

SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES

SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES Table F1 Environmental Specifications for Table F2 Fuses Operating Temperature Mechanical Vibration

More information

Fundamentals. Overview. Multi-layer Design for Chip Fuses. Wire-In-Air Design for 2410SFV, 1206SFV Fuses. Figure SF1. Figure SF2.

Fundamentals. Overview. Multi-layer Design for Chip Fuses. Wire-In-Air Design for 2410SFV, 1206SFV Fuses. Figure SF1. Figure SF2. Fundamentals Overview TE Circuit Protection offers the widest selection of surfacemount fuses available for addressing a broad range of overcurrent protection applications. Helping to prevent costly damage

More information

Surface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)

Surface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A) 1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free

More information

FP1008R5 and FP1008R6 High frequency, high current power inductors

FP1008R5 and FP1008R6 High frequency, high current power inductors Technical Data 152 Effective April 217 FP18R5 and FP18R6 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density

More information

Features. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B

Features. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B RoHS Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER

More information

2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description

2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free

More information

PLED Ultra Low Holding Current Series

PLED Ultra Low Holding Current Series RoHS Description Agency Approvals This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching

More information

PolySwitch Resettable PTCs Surface Mount > LoRho Series. Low Rho SMD Series. Description

PolySwitch Resettable PTCs Surface Mount > LoRho Series. Low Rho SMD Series. Description Low Rho SMD Series Description PolySwitch low resistivity SMD (surface-mount device) is a versatile device well suited for general applications which have space-constrained, low power dissipation and high

More information

Low-Profile, Shielded Drum Core, Tapped Inductor SDT30 Series

Low-Profile, Shielded Drum Core, Tapped Inductor SDT30 Series Low-Profile, Shielded Drum Core, Tapped Inductor SDT0 Series SMD Device Description Halogen Free Approved for use with Maxim MAX45 chip set 5 C maximum total temperature operation. x. x.0mm shielded drum

More information

NTC Thermistor for Automotive: TSM-C Series

NTC Thermistor for Automotive: TSM-C Series Features 1. Qualification based on AEC-Q200 Rev-C 2. Operating temperature range: -50 ~ +150 3. Superior stability in high-temperature and high-humidity environment 4. RoHS & Halogen Free (HF) compliant

More information

POLYFUSE Resettable PTCs Surface Mount > 2920L Series

POLYFUSE Resettable PTCs Surface Mount > 2920L Series Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY

More information

Coiltronics HCM0703 Series High current power inductors

Coiltronics HCM0703 Series High current power inductors Supersedes September, 2010 Coiltronics HCM0703 Series High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs

More information

Multi-Phase Power Inductors CL0904 Series

Multi-Phase Power Inductors CL0904 Series Multi-Phase Power Inductors CL0904 Series HALOGEN HF FREE Pb Applications For exclusive use with Volterra VPR-Devices Environmental Data Storage temperature range: -40 C to +125 C Operating temperature

More information

High Current Power Inductors HCM1104 Series

High Current Power Inductors HCM1104 Series High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface

More information

S505SC 5 x 20 mm Time-delay, axial lead ceramic tube fuses

S505SC 5 x 20 mm Time-delay, axial lead ceramic tube fuses Supersedes September 2013 5 x 20 mm Time-delay, axial lead ceramic tube fuses Pb Product description Time-delay, high breaking capacity Designed to IEC 60127-2 Nickel-plated brass end cap construction

More information

Coiltronics HCM1104 Series High current power inductors

Coiltronics HCM1104 Series High current power inductors Supersedes March 2012 Coiltronics High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment

More information

SURFACE-MOUNT FUSES Slow-Blow Chip Fuses

SURFACE-MOUNT FUSES Slow-Blow Chip Fuses SURFACE-MOUNT FUSES Available in industry standard 206 and 0603 chip sizes, Littelfuse slow-blow chip fuses help provide overcurrent protection on systems that experience large and frequent current surges

More information

SURFACE-MOUNT FUSES Slow-Blow Chip Fuses

SURFACE-MOUNT FUSES Slow-Blow Chip Fuses SURFACE-MOUNT FUSES Available in industry standard 206 and 0603 chip sizes, Littelfuse slow-blow chip fuses help provide overcurrent protection on systems that experience large and frequent current surges

More information

C310FH 3.1 mm x 10 mm Fast-acting, axial lead ceramic tube fuses

C310FH 3.1 mm x 10 mm Fast-acting, axial lead ceramic tube fuses Technical Data 10405 3.1 mm x 10 mm Fast-acting, axial lead ceramic tube fuses Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED and general lighting Consumer electronics Desktop,

More information

High Current, High Frequency Power Inductors HCM1103 Series

High Current, High Frequency Power Inductors HCM1103 Series High Current, High Frequency Power Inductors HCM1103 Series HALOGEN HF FREE Pb Description Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 11.5 x 10.3 x 3.0mm maximum

More information

POLYFUSE Resettable PTCs Surface Mount > 2920L Series

POLYFUSE Resettable PTCs Surface Mount > 2920L Series Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY

More information

Komatsulite HC Series Breaker

Komatsulite HC Series Breaker *RoHS COMPLIANT & **HALOGEN FREE 33 11515 V HC82AY 1 Features High current type Overtemperature and overcurrent protection for lithium polymer and prismatic cells Controls abnormal, excessive current instantaneously

More information

SURFACE-MOUNT FUSES Pulse Tolerant Chip Fuses

SURFACE-MOUNT FUSES Pulse Tolerant Chip Fuses SURFACE-MOUNT FUSES have high inrush current withstand capability and provide overcurrent protection for DC power systems. These devices combine a silver fusing element and monolithic, multilayer design

More information

Multi-Phase Power Inductors CPL, CPLA & CPLE Series

Multi-Phase Power Inductors CPL, CPLA & CPLE Series Multi-Phase Power Inductors CPL, CPLA & CPLE Series HALOGEN HF FREE Pb SMD Device Description Halogen Free CPLA Series features acoustic noise dampening properties CPLE Series features optimized core material

More information

KCA Series A-Type Breaker (Thermal Cutoff Device)

KCA Series A-Type Breaker (Thermal Cutoff Device) *RoHS COMPLIANT & **HALOGEN FREE Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n High current type n Optimal corrosion resistant properties n Smaller body size: L5.4 x W3.2 x H0.89

More information

PTC Thermistor for Automotive:TPM-C Series

PTC Thermistor for Automotive:TPM-C Series Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics Part Number Code

More information

High Current Power Inductors HCM1104 Series

High Current Power Inductors HCM1104 Series High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface

More information

Tablet PC Automotive applications Printer Security systems VOP (V) Ibreak (A)

Tablet PC Automotive applications Printer Security systems VOP (V) Ibreak (A) Description Current Limiting Module (CLM) is a chip type surface mountable device that can protect against both overcurrent and overcharging. It comprises a fuse element to ensure stable operation under

More information

Specification. N1206 F Series. Approved by. Date of Establish : (Ref. No : 1206 F_Rev.2)

Specification. N1206 F Series. Approved by. Date of Establish : (Ref. No : 1206 F_Rev.2) Specification Product Type SMD(Micro) Fuse N1206 F Series Approved by Date of Establish : 2012.11.01(Ref. No : 1206 F_Rev.2) 1. Scope This specification covers the detail requirements for SMD Micro fuse

More information

POLY-FUSE Resettable PTCs Surface Mount > 1206L Series

POLY-FUSE Resettable PTCs Surface Mount > 1206L Series Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER

More information

PTC Thermistor for Automotive:TPM-C Series

PTC Thermistor for Automotive:TPM-C Series SMD PTC Thermistor for Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics

More information

Transient Voltage Suppression Diodes SMTO ka > LTKAK6 series. Description. Features. Test Current I T. Reverse Breakdown Voltage (V BR I T

Transient Voltage Suppression Diodes SMTO ka > LTKAK6 series. Description. Features. Test Current I T. Reverse Breakdown Voltage (V BR I T SMTO-218-6 ka > LTKAK6 series LTKAK6 Series RoHS Pb e3 Description The LTKAK6 series offers superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology,

More information

SIDACtor Protection Thyristors Baseband Protection (Voice-DS1)

SIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides

More information

Gas Discharge Tube (GDT) Products CG/CG2 Series. CG/CG2 Series

Gas Discharge Tube (GDT) Products CG/CG2 Series. CG/CG2 Series Description Littelfuse highly reliable GDTs provide a high degree of surge protection in a small size ideal for board level circuit protection. GDTs function as switches which dissipate a minimum amount

More information

S J

S J 1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V

More information

SFI Electronics Technology

SFI Electronics Technology 1. Part Number Identification SFI 2220 SA 240 250 J Company Logo Inner Code Size 1206~3220 SA SHA Series 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V 151 = 15 10 1 V=150V

More information

Gas Discharge Tubes SL1002A Series

Gas Discharge Tubes SL1002A Series SL12A Series SL12A Series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Additional Information Description The Broadband Optimized SL12A series has been especially

More information

KCA Series A-Type Breaker (Thermal Cutoff Device)

KCA Series A-Type Breaker (Thermal Cutoff Device) *RoHS COMPLIANT & **HALOGEN FREE Features Formerly a product Miniature Thermal Cutoff (TCO) device High current type Optimal corrosion resistant properties Smaller body size: L5.4 x W3.2 x H0.89 mm Overtemperature

More information

Radial Leaded > 72R Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)

Radial Leaded > 72R Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) 72R Series RoHS * Description The 72R Series is designed to provide overcurrent protection to 72Vdc maximum voltage with a maximum 40A short circuit rating. Features 72Vdc max voltage w/max 40A short circuit

More information

WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive)

WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive) WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive) *Contents in this sheet are subject to change without prior notice. Page

More information

Dear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955

Dear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955 Littelfuse, Inc. 8755 West Higgins Road, Suite 5 Chicago, IL 6631 USA (773) 628-1 7.1,218 RE: LFPCN41214 From: Littelfuse Product Management Team Dear Customer, Please be aware that Littelfuse is discontinuing

More information

HV Supercapacitors Cylindrical cells

HV Supercapacitors Cylindrical cells HV Supercapacitors Cylindrical cells Supersedes October 2015 Pb HALOGEN HF FREE Features Ultra low ESR for high power density UL recognized Applications Electric, Gas, Water smart meters Controllers RF

More information

DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES

DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off

More information

Low profile Fast response to fault current Compatible with high temperature solders

Low profile Fast response to fault current Compatible with high temperature solders Description The 1206 series provides miniature surface mount overcurrent protection with holding current from 0.12A to 2.0A. This series is suitable for wide range of applications in modern electronics

More information

CCFL Transformers Cold cathode fluorescent lamp inverter transformers

CCFL Transformers Cold cathode fluorescent lamp inverter transformers Supersedes March 2007 Cold cathode fluorescent lamp inverter transformers Applications CCFL power supplies Environmental data Storage temperature range: -40 C to +85 C Operating ambient temperature range:

More information

SIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description

SIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series

More information

Specification Status: Released

Specification Status: Released PAGE NO.: 1 of 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against

More information

Current Sensing Resistor Metal Foil Type >SMF Series

Current Sensing Resistor Metal Foil Type >SMF Series Page: 1 of 6 General Chip size from 0603 to Resistance value from 3mΩ to 200mΩ Low thermal EMF. Low TCR. Lead free, RoHS compliant for global applications and halogen free Application Switching model power

More information

Specification Status: Released

Specification Status: Released PAGE NO.: 1 OF 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against

More information

Automotive Grade Thin Film Chip Resistors

Automotive Grade Thin Film Chip Resistors FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55

More information

NXE2 Series Isolated 2W Single Output SM DC-DC Converters

NXE2 Series Isolated 2W Single Output SM DC-DC Converters SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry

More information

Fast response to fault current. Pd typ (W) Imax (A)

Fast response to fault current. Pd typ (W) Imax (A) Description The 1812 series provides surface mount resettable overcurrent protection with holding current from 0.1A to 3.0A. This series offers complete portfolio in terms of holding current and working

More information

SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current

SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry

More information

FUZETEC TECHNOLOGY CO., LTD.

FUZETEC TECHNOLOGY CO., LTD. NO. PQ18-01ER Product Specification and Approval Sheet Version A9 Page 1/5 Surface Mountable PTC Resettable Fuse: FSMD1206 Series 1. Summary (a) RoHS Compliant & Halogen Free (b) Applications: All high-density

More information

Multi-Layer Power Inductors (IP_L Series)

Multi-Layer Power Inductors (IP_L Series) Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x

More information

QTCT230 SERIES 2.5 x 3.2mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 45.

QTCT230 SERIES 2.5 x 3.2mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 45. Description Q-Tech s surface-mount QTCT230 oscillators consist of an IC 3.3Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from 10.000MHz

More information

Features 60R010X & 60R017X. P d typ. (W) I max (A) V max (Vdc)

Features 60R010X & 60R017X. P d typ. (W) I max (A) V max (Vdc) 60R Series RoHS * Description The 60R Series radial leaded device is designed to provide overcurrent protection for ( 60V) applications where space is not a concern and resettable protection is preferred.

More information

SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current

SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry

More information