Wet Tantalum Capacitors Cylindrical Body, Hermetically Sealed

Size: px

Start display at page:

Download "Wet Tantalum Capacitors Cylindrical Body, Hermetically Sealed"

Mavis Logan
6 years ago
Views:

Wet Tantalum Capacitors Cylindrical Body, ermetically Sealed PERFORMANCE CARACTERISTICS Operating Temperature: to +175 C with proper derating Voltage Range: 8 V C to 630 V C at 85 C Reverse Voltage:

1 Wet Tantalum Capacitors Cylindrical Body, ermetically Sealed PERFORMANCE CARACTERISTICS Operating Temperature: to +175 C with proper derating Voltage Range: 8 V C to 630 V C at 85 C Reverse Voltage: none Capacitance Range: 2 μf to 2200 μf Tolerance Range: -15 % to +50 % (standard for XTK, XTM, XTV) -15 % to +75 % (standard for XT, XTL) ± 20 % (special order) FEATURES igh temperature igh voltage igh capacitance Withstands high frequency vibration to 2000 z ermetically sealed Long shelf life LA drawings and Terminations: standard 100 % nickel (RoS compliant) Mounting: arrays and assemblies Material categorization: for definitions of compliance please see ORERING INFORMATION XTV 126 T 630 P 0 A MOEL COE TOLERANCE C VOLTAGE RATING CASE COE INSULATION TERMINAL CONFIGURATION XT XTK XTL XTM XTV This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. T = -15 % to +50 % (XTK, XTM, XTV standard) U = -15 % to +75 % (XT, XTL standard) M = ± 20 % (special order) This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. P = polar (case negative) R = reverse polarity (case positive) 0 = uninsulated (standard) 4 = teflon (+175 C limit) See Styles For styles, terminal configurations, mounting methods and hardware, please see pages following Standard Ratings table IMENSIONS in inches [millimeters] XT-XTL-XTV XTK-XTM ± ± Case negative (-) 5/16 ± 1/16 TYPE XTK - XTM to XTL - XT to XTV to For insulated parts, add 0.015" [0.38] to the diameter. The insulation shall lap over the ends of the capacitor body Revision: 03-Apr-18 1 ocument Number: 42077

2 STANAR RATINGS AN IMENSIONS WORKING VOLTAGE TYP. ESR CL AT V C Z % CANGE FROM ROOM TEMP. APPROX. WEIGT RIPPLE RMS TO +175 C Revision: 03-Apr-18 2 ocument Number: SIZE PART NUMBER (μf) +125 C +175 C ( ) +85 C +125 C +175 C ( ) +85 C +175 C (g) (ma) 8 V C AT +85 C XTK706(1)008P0A XTM147(1)008P0A 10 V C AT +85 C XTK506(1)010P0A XTM107(1)010P0A 12 V C AT +85 C XTV587(1)012P0A XTV857(1)012P0A XTV118(1)012P0A XTV228(1)012P0A 18 V C AT +85 C XTK356(1)018P0A XTM706(1)018P0A XTL127(1)018P0A XT247(1)018P0A XTV397(1)018P0A XTV567(1)018P0A XTV907(1)018P0A XTV188(1)018P0A 20 V C AT +85 C XTK286(1)020P0A XTM566(1)020P0A XTL107(1)020P0A XT207(1)020P0A 30 V C AT +85 C XTK206(1)030P0A XTM406(1)030P0A XTL756(1)030P0A XT157(1)030P0A XTV257(1)030P0A XTV377(1)030P0A XTV657(1)030P0A XTV138(1)030P0A 35 V C AT +85 C XTK206(1)035P0A XTM406(1)035P0A XTL606(1)035P0A Part number definitions: (1) Tolerance code: T = -15 % to +50 % (standard for XTK, XTM, XTV) U = -15 % to +75 % (standard for XT, XTL) M = ± 20 % (available by special order)

3 STANAR RATINGS AN IMENSIONS WORKING VOLTAGE TYP. ESR CL AT V C Z 40 V C AT +85 C % CANGE FROM ROOM TEMP. APPROX. WEIGT RIPPLE RMS TO +175 C (μf) +125 C +175 C ( ) +85 C +125 C +175 C ( ) +85 C +175 C (g) (ma) XTV197(1)040P0A XTV297(1)040P0A XTV507(1)040P0A XTV108(1)040P0A 50 V C AT +85 C XTV907(1)050P0A 60 V C AT +85 C XTK126(1)060P0A XTM256(1)060P0A XTL406(1)060P0A XT706(1)060P0A XT806(1)060P0A XTV137(1)060P0A XTV207(1)060P0A XTV357(1)060P0A XTV707(1)060P0A XTV757(1)060P0A 90 V C AT +85 C XTK805(1)090P0A XTM166(1)090P0A XTL256(1)090P0A XT506(1)090P0A XTV846(1)090P0A XTV127(1)090P0A XTV227(1)090P0A XTV457(1)090P0A 180 V C AT +85 C XTK205(1)180P0A XTK405(1)180P0A XTM805(1)180P0A XTL126(1)180P0A XT256(1)180P0A XTV426(1)180P0A XTV606(1)180P0A XTV117(1)180P0A XTV237(1)180P0A Part number definitions: (1) Tolerance code: T = -15 % to +50 % (standard for XTK, XTM, XTV) U = -15 % to +75 % (standard for XT, XTL) M = ± 20 % (available by special order) SIZE PART NUMBER Revision: 03-Apr-18 3 ocument Number: 42077

4 STANAR RATINGS AN IMENSIONS WORKING VOLTAGE TYP. ESR CL AT V C Z 270 V C AT +85 C % CANGE FROM ROOM TEMP. APPROX. WEIGT RIPPLE RMS TO +175 C (μf) +125 C +175 C ( ) +85 C +125 C +175 C ( ) +85 C +175 C (g) (ma) XTK255(1)270P0A XTM505(1)270P0A XTL805(1)270P0A XT166(1)270P0A XTV286(1)270P0A XTV406(1)270P0A XTV756(1)270P0A XTV157(1)270P0A 360 V C AT +85 C XTK205(1)360P0A XTM405(1)360P0A XTL605(1)360P0A XT126(1)360P0A XTV226(1)360P0A XTV306(1)360P0A 450 V C AT +85 C XTL505(1)450P0A XT106(1)450P0A XTV176(1)450P0A XTV256(1)450P0A 540 V C AT +85 C XTL405(1)540P0A XT805(1)540P0A XTV146(1)540P0A XTV206(1)540P0A 630 V C AT +85 C XTL355(1)630P0A XT705(1)630P0A XTV126T630P0A XTV186(1)630P0A Part number definitions: (1) Tolerance code: T = -15 % to +50 % (standard for XTK, XTM, XTV) U = -15 % to +75 % (standard for XT, XTL) M = ± 20 % (available by special order) SIZE PART NUMBER Revision: 03-Apr-18 4 ocument Number: 42077

5 XT-L-V STYLES STYLE A STYLE B STYLE C Wire hole IA NOM STYLE STYLE E STYLE F UNC-2A /4-20UNC-3A UNC-2A IA. IA. Negative screw lug is for indexing and negative connection only See etail C in Mounting Methods table for suggested mounting methods See etail in Mounting Methods table for suggested mounting method STYLE G STYLE STYLE J Wire hole UNC-2A Wire hole /4-20UNC-3A Wire hole UNC-2A IA. IA Negative screw lug is for index and negative connection only See etail C in Mounting Methods table for suggested mounting methods See etail in Mounting Methods table for suggested mounting methods STYLE K STYLE L STYLE M 1/2-20UNF-2A TREA 1/2-20UNF-2A TREA ± XT-XTL ± XTV See etails B and E in Mounting Methods table for suggested mounting methods ± XT-XTL ± XTV See etail B and E in Mounting Methods table for suggested mounting methods * Extends on IA. units only Revision: 03-Apr-18 5 ocument Number: 42077

6 XTK-M STYLES STYLE A STYLE B STYLE C STYLE POS NEG POS NEG POS NEG POS NEG STYLE E STYLE F STYLE G STYLE POS NEG POS NEG POS NEG POS NEG POSITIVE TERMINALS FOR XTK AN XTM STYLE A STYLE B, C AN STYLE E, G AN STYLE F ± ± IA /8-24 UNF 2A /8-24 UNF 2A ± Terminal detail enlarged NEGATIVE TERMINALS FOR XTK AN XTM STYLE A STYLE B, E AN F STYLE C AN G STYLE AN IA. Case negative IA. hole NC 2A Revision: 03-Apr-18 6 ocument Number: 42077

7 XT, XTL AN XTV MOUNTING METOS ETAIL A ETAIL B ETAIL C Turret terminal detail dimensions (positive lead connections) ± IA. ± For configurations A, B, C,, E, F, G,, J and M ± ± ETAIL Configuration L only For configurations K and L Panel Nut nearly flush with ends of s For configurations E and Panel Tapped 1/4-20UNC-2B hole or internal tooth lockwasher and hex nut IA. counter bore x deep (for head of weld screw) Use 8-32 x long helical for non-ferrous metal panel MIN. Not recommended for non-metal panels For configurations F and J ETAIL E Secure to 100 in, lbs. torque Configuration L only Panel must be rigidly fixed For configurations K and L 1" IA. counterbore 1.250" IA. counterbore for XTV units MIN. recommended thickness May use rectangular hole of similar dimensions Configuration L only Standard mounting nut provided is plated steel. Stainless steel nut can be obtained by adding /STN suffix to part number RATINGS AN CASE COES LA RAWING PIN (NOM.) TOLERANCE C LEAKAGE ESR 25 C IMPEANCE CANGE (%) RIPPLE IMENSION CURRENT L FIGURE 1/ (1.57) (μf) (%) +25 C +85 C +125 C ( ) ( ) +85 C +125 C (ma) (INCES) 8 V C AT +85 C RATE; 9.2 V C AT +85 C SURGE , (11.13) 1A , (14.27) 1A 10 V C AT +85 C RATE; 11.5 V C AT +85 C SURGE , (11.13) 1A , (14.27) 1A 20 V C AT +85 C RATE; 23 V C AT +85 C SURGE , (11.13) 1A , (14.27) 1A 30 V C AT +85 C RATE; 34.5 V C AT +85 C SURGE , (11.13) 1A , (14.27) 1A Revision: 03-Apr-18 7 ocument Number: 42077

8 04022 RATINGS AN CASE COES LA RAWING PIN (NOM.) TOLERANCE C LEAKAGE ESR 25 C IMPEANCE CANGE (%) RIPPLE IMENSION CURRENT L FIGURE 1/ (1.57) (μf) (%) +25 C +85 C +125 C ( ) ( ) +85 C +125 C (ma) (INCES) 60 V C AT +85 C RATE; 69 V C AT +85 C SURGE , (11.13) 1A , (14.27) 1A 90 V C AT +85 C RATE; 103 V C AT +85 C SURGE , (11.13) 1A , (14.27) 1A 180 V C AT +85 C RATE; 207 V C AT +85 C SURGE , (18.26) 1A , (23.83) 1A 270 V C AT +85 C RATE; 310 V C AT +85 C SURGE , (26.19) 1A , (34.93) 1A 360 V C AT +85 C RATE; 414 V C AT +85 C SURGE , (33.32) 1A , (45.24) 1A 20 V C AT +85 C RATE; 23 V C AT +85 C SURGE , (13.72) 1B , (18.59) 1B 30 V C AT +85 C RATE; 34.5 V C AT +85 C SURGE , (13.72) 1B , (18.59) 1B 60 V C AT +85 C RATE; 69 V C AT +85 C SURGE , (13.72) 1B , (18.59) 1B 90 V C AT +85 C RATE; 103 V C AT +85 C SURGE , (13.72) 1B , (18.59) 1B 180 V C AT +85 C RATE; 207 V C AT +85 C SURGE , (23.37) 1B , (33.02) 1B 270 V C AT +85 C RATE; 310 V C AT +85 C SURGE , (32.36) 1B , (47.37) 1B 360 V C AT +85 C RATE; 414 V C AT +85 C SURGE , (41.53) 1B , (61.47) 1B 450 V C AT +85 C RATE; 518 V C AT +85 C SURGE , (50.80) 1B , (75.69) 1B 540 V C AT +85 C RATE; 621 V C AT +85 C SURGE , (60.07) 1B , (89.71) 1B 630 V C AT +85 C RATE; 724 V C AT +85 C SURGE , (69.09) 1B Revision: 03-Apr-18 8 ocument Number: 42077

9 04022 RATINGS AN CASE COES LA RAWING PIN (NOM.) TOLERANCE C LEAKAGE ESR 25 C IMPEANCE CANGE (%) RIPPLE CURRENT 1/ IMENSION L (1.57) (μf) (%) +25 C +85 C +125 C ( ) ( ) +85 C +125 C (ma) (INCES) 30 V C AT +85 C RATE; 34.5 V C AT +85 C SURGE ± (15.24) 1C , (15.24) 1C ± (27.94) 1C , (27.94) 1C ± (27.94) 1C , (27.94) 1C 60 V C AT +85 C RATE; 69 V C AT +85 C SURGE ± (15.24) 1C , (15.24) 1C ± (27.94) 1C , (27.94) 1C ± (27.94) 1C , (27.94) 1C 90 V C AT +85 C RATE; 103 V C AT +85 C SURGE ± (15.24) 1C , (15.24) 1C ± (27.94) 1C , (27.94) 1C ± (27.94) 1C , (27.94) 1C 180 V C AT +85 C RATE; 207 V C AT +85 C SURGE ± (24.79) 1C , (24.79) 1C ± (24.79) 1C , (24.79) 1C ± (49.23) 1C , (49.23) 1C ± (49.23) 1C , (49.23) 1C 270 V C AT +85 C RATE; 310 V C AT +85 C SURGE ± (34.29) 1C , (34.29) 1C ± (34.29) 1C , (34.29) 1C ± (71.42) 1C , (71.42) 1C ± (71.42) 1C , (71.42) 1C 360 V C AT +85 C RATE; 414 V C AT +85 C SURGE ± (43.31) 1C , (43.31) 1C ± (43.31) 1C , (43.31) 1C 450 V C AT +85 C RATE; 518 V C AT +85 C SURGE ± (52.83) 1C , (52.83) 1C ± (52.83) 1C , (52.83) 1C 540 V C AT +85 C RATE; 621 V C AT +85 C SURGE ± (61.85) 1C , (61.85) 1C ± (61.85) 1C , (61.85) 1C 630 V C AT +85 C RATE; 724 V C AT +85 C SURGE ± (71.37) 1C , (71.37) 1C ± (71.37) 1C , (71.37) 1C FIGURE Revision: 03-Apr-18 9 ocument Number: 42077

10 FIGURES FIGURE 1A ± Weld L See Ratings table ± CASE CIRCUIT IAGRAM - + FIGURE 1B ± See etail A IA. ± IA CASE NEG L See Ratings table IA Solder fillet permissible FIGURE 1C ETAIL A SOLER LUG TERMINAL See etail A ± Solder fillet permissible IA. hole IA CASE NEG L See Ratings table IA. ± IA. Revision: 03-Apr ocument Number: 42077

11 Legal isclaimer Notice isclaimer ALL PROUCT, PROUCT SPECIFICATIONS AN ATA ARE SUBJECT TO CANGE WITOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR ESIGN OR OTERWISE. Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on s knowledge of typical requirements that are often placed on products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the product could result in personal injury or death. Customers using or selling products not expressly indicated for use in such applications do so at their own risk. Please contact authorized personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of. Product names and markings noted herein may be trademarks of their respective owners VISAY INTERTECNOLOGY, INC. ALL RIGTS RESERVE Revision: 08-Feb-17 1 ocument Number: 91000

XTH-K-L-M-V Vishay Wet Tantalum Capacitors Cylindrical Body, Hermetically Sealed

XTH-K-L-M-V Vishay Wet Tantalum Capacitors Cylindrical Body, Hermetically Sealed XT-K-L-M-V Wet Tantalum Capacitors FEATURES igh temperature igh voltage igh capacitance Withstands high frequency vibration to 2000 z ermetically sealed Long shelf life SCC rawings 04032 & 04033 PERFORMANCE