Capacitance. Mechanical Tests
|
|
- Allen Lawson
- 5 years ago
- Views:
Transcription
1 WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2011/65/EU Typical Applications For general C-applications e.g. By-pass Blocking Coupling and decoupling Timing Construction ielectric: Polyethylene-terephthalate (PET) film Capacitor electrodes: Vacuum-deposited Internal construction: Plastic film Vacuum-deposited electrode Metal contact layer (schoopage) Terminating wire Encapsulation: Solvent-resistant, flame-retardant plastic case with epoxy resin seal, UL 94 V-0 Terminations: Tinned wire. Marking: Colour: Red. Marking: Silver/White. Epoxy resin seal: Red Electrical ata Capacitance range: 0.01 mf to 10 mf (E12-values on request) Rated voltages: 50 VC, 63 VC, 100 VC, 250 VC, 400 VC, 630 VC Capacitance tolerances: ±20%, ±10%, ±5% Operating temperature range: 55+ C to C (+125 C available subject to special enquiry) Climatic test category: 55/100/21 in accordance with IEC Insulation resistance at +20+ C: Test specifications: In accordance with IEC Test voltage: 1.6 U r, 2 sec. Voltage derating: A voltage derating factor of 1.25 % per K must be applied from +85+ C for C voltages and from +75+ C for AC voltages Reliability: Operational life hours Failure rate 2 fit (0.5 x U r and 40) C) U r U test C 0.33 mf 0.33 mf < C T 10 mf 50 VC 10 V 5 x 10 3 M (mean value: 3 x 10 4 M ) 1000 sec (M x mf) (mean value: 3000 sec) 63 VC 50 V 1 x 10 4 M (mean value: 5 x 10 4 M ) 1250 sec (M x mf) (mean value: 3000 sec) U100 VC 100 V 1.5 x 10 4 M (mean value: 1 x 10 5 M ) 3000 sec (M x mf) (mean value: 6000 sec) Measuring time: 1 min. issipation factors at + 20) C: tan d at f C 0.1 mf 0.1 mf < C T 1.0 mf C > 1.0 mf 1 khz 8 x x x khz 15 x x khz 30 x 10-3 Maximum pulse rise time: for pulses equal to the rated voltage Capacitance mf Pulse rise time V/msec max. operation/test 50 VC 63 VC 100 VC 250 VC 400 VC 630 VC /350 35/350 50/500 80/ / /200 25/250 50/500 80/800 90/ /100 15/150 20/200 50/500 80/ /80 12/120 15/150 25/ /80 7.5/75 10/ /50 5/ /30 3/ /25 Mechanical Tests Pull test on pins: 10 N in direction of pins according to IEC Vibration: 6 hours at Hz and 0.75 mm displacement amplitude or 10 g in accordance with IEC Low air density: 1kPa = 10 mbar in accordance with IEC Bump test: 4000 bumps at 390 m/sec 2 in accordance with IEC Packing Available taped and reeled. etailed taping information and graphs at the end of the catalogue. For further details and graphs please refer to Technical Information. 33
2 WIMA MKS FKP 42 Continuation General ata Capacitance 50 VC/30 VAC* 63 VC/40 VAC* W H L PCM** Part number W H L PCM** Part number 0.01 mf MKS2C021001A MKS2C021501A MKS2C022201A MKS2C023301A MKS2C024701A MKS2C026801A mf MKS2C031001A MKS2C031501A MKS2C032201B MKS2B033301A MKS2C033301C MKS2B034701B MKS2C034701C MKS2B036801C MKS2C036801E mf MKS2B041001C MKS2C041001F MKS2B041501E MKS2C041501H MKS2B042201F MKS2C042201K MKS2B043301H MKS2C043301K MKS2B044701K MKS2C044701M MKS2B046801M MKS2C046801N00 10 mf MKS2B051001N00 Capacitance 100 VC/63 VAC* 250 VC/160 VAC* W H L PCM** Part number W H L PCM** Part number 0.01 mf MKS A MKS2F021001A MKS A MKS2F021501A MKS A MKS2F022201A MKS A MKS2F023301C MKS A MKS2F024701C MKS A MKS2F026801C mf MKS A MKS2F031001E MKS C MKS2F031501F MKS C MKS2F032201H MKS E MKS2F033301K MKS E MKS2F034701M MKS F MKS2F036801N mf MKS K MKS M MKS N00 * AC voltage: f = 50 Hz; 1.4 x U rms + UC U r ** PCM = Printed circuit module = pin spacing. W ims. in mm. 6-2 d = 0.5 P Rights reserved to amend design data without prior notification. d H L 5 PCM at the pin exit points ( ± 0.5) Part number completion: Tolerance: 20 % = M 10 % = K 5 % = J Packing: bulk = S Pin length: 6-2 = S Taped version see page 144. Continuation page 35 34
3 WIMA MKS FKP 42 Continuation General ata Capacitance 400 VC/200 VAC* 630 VC/220 VAC* W H L PCM** Part number W H L PCM** Part number 0.01 mf MKS2G021001A MKS2J021001H MKS2G021501A MKS2J021501K MKS2G022201C MKS2J022201K MKS2G023301E MKS2J023301K MKS2G024701E MKS2J024701M MKS2G026801H mf MKS2G031001K MKS2G031501M MKS2G032201N00 * AC voltage: f = 50 Hz; 1.4 x U rms + UC U r ** PCM = Printed circuit module = pin spacing. ims. in mm. The values of the WIMA MKM 2 and WIMA MKI 2 ranges according to the main catalogue 2009 are still available on request. Part number completion: Tolerance: 20 % = M 10 % = K 5 % = J Packing: bulk = S Pin length: 6-2 = S Taped version see page 144. Impedance change with frequency (general guide). Rights reserved to amend design data without prior notification. Permissible AC voltage in relation to frequency at 10) C internal temperature rise (general guide). 35
4 Recommendation for Processing and Application of Through-Hole Capacitors Soldering Process Internal temperature of the capacitor must be kept as follows: Polyester: preheating: T max. T 125 C soldering: T max. T 135 C Polypropylene: preheating: T max. T 100 C soldering: T max. T 110 C Single wave soldering Soldering bath temperature: T P 260 C well time: t P 5 sec ouble wave soldering Soldering bath temperature: T P 260 C well time: St P 5 sec ue to different soldering processes and heat requirements the graphs are to be regarded as a recommendation only. WIMA Quality and Environmental Philosophy ISO 9001:2008 Certification ISO 9001:2008 is an international basic standard of quality assurance systems for all branches of industry. The approval according to ISO 9001:2008 of our factories by the VE inspectorate certifies that organisation, equipment and monitoring of quality assurance in our factories correspond to internationally recognized standards. WIMA WPCS The WIMA Process Control System (WPCS) is a quality surveillance and optimization system developed by WIMA. WPCS is a major part of the quality-oriented WIMA production. Points of application of WPCS during production process: incoming material inspection metallization film inspection schoopage pre-healing pin attachment cast resin preparation/ encapsulation 100% final inspection AQL check WIMA Environmental Policy All WIMA capacitors, irrespective of whether through-hole devices or SM, are made of environmentally friendly materials. Neither during manufacture nor in the product itself any toxic substances are used, e.g. Lead PBB/PBE PCB Arsenic CFC Cadmium Hydrocarbon chloride Mercury Chromium 6+ etc. We merely use pure, recyclable materials for packing our components, such as: carton cardboard adhesive tape made of paper polystyrene We almost completely refrain from using packing materials such as: foamed polystyrene (Styropor ) adhesive tapes made of plastic metal clips RoHS Compliance According to the RoHS irective 2011/65/EU certain hazardous substances like e.g. lead, cadmium, mercury must not be used any longer in electronic equipment as of July 1st, For the sake of the environment WIMA has refraind from using such substances since years already. WIMA Kondensatoren sind bleifrei konform RoHS 2011/65/EU WIMA capacitors are lead free in accordance with RoHS 2011/65/EU Tape for lead-free WIMA capacitors IN EN ISO 14001:2004 WIMA s environmental management has been established in accordance with the guidelines of IN EN ISO 14001:2004 to optimize the production processes with regard to energy and resources. 14
5 P P P 1 H1 P 1 H t Typical imensions for Taping Configuration P 2 P Vh H1 P 1 W2 H W0 W1 iagram 1: PCM2.5/5/7.5mm W 0 F d P 0 d d F P 0 P 2 F P 2 P 0 iagram 2: PCM10/15mm iagram 3:PCM 22.5 and 27.5*mm *PCM 27.5 taping possible withtwo feed holesbetween components imensions for Radial Taping esignation Symbol PCM 2.5 taping PCM 5 taping PCM 7.5 taping PCM 10 taping* PCM 15 taping* PCM 22.5 taping PCM 27.5 taping Carrier tape width W 18.0 p p p p p p p0.5 Hold-down tape width W for hot-sealing 6.0 for hot-sealing 12.0 for hot-sealing 12.0 for hot-sealing 12.0 for hot-sealing 12.0 for hot-sealing for hot-sealing 12.0 adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape Hole position W p p p p p p p0.5 Hold-down tape position W to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. Feed hole diameter p p p p p p p0.2 Pitch of component P 12.7 p p p p p p1.5 3 * 8.1 p1.5 or 50.8 p1.5 cumulative pitch cumulative pitch cumulative pitch cumulative pitch cumulative pitch cumulative pitch cumulative pitch Feed hole pitch P p0.3 error max p0.3 error max p0.3 error max p0.3 error max p0.3 error max p0.3 error max p0.3 error max. 1.0 mm/20 pitch 1.0 mm/20 pitch 1.0 mm/20 pitch 1.0 mm/20 pitch 1.0 mm/20 pitch 1.0 mm/20 pitch 1.0 mm/20 pitch Feed hole centre to pin Hole centre to component centre P p p p p p p p0.7 P p p p p p p p1.3 Feed hole centre to bottom 16.5 p p p p p p p0.5 H edge of the component 18.5 p p p p p p p0.5 Feed hole centre to top H+H H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 edge of the component max max to to to to to 45.0 Pin spacing at F 2.5 p p p p p p0.8 upper edge of carrier tape 0.2 Pin diameter d 0.4 p p p0.05 or ,06 +0,08 +0, p0.05 or Component alignment h p 2.0 max. p 2.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max. Total tape thickness t 0.7 p p p p p p p0.2 Package (see also page 145) ROLL/AMMO Unit see details page 146. ims in mm. iameter of pins see General ata. REEL P 360 max. 52 p2 depending on P 30 p1 B 58 p2 comp. dimensions * PCM 10 and PCM 15 can be crimped to PCM 7.5. Position of components according to PCM 7.5 (sketch 1). P 0 = 12.7 or 15.0 is possible REEL P 360 max. B P 30 p1 AMMO 52 p2 54 p2 depending P 500 max. 58 p2 or REEL B 60 p2 on PCM and P 25 p1 66 p2 68 p2 component dimensions Please clarify customer-specific deviations with the manufacturer. 144
6 Types of Tape Packaging of Capacitors for Automatic Radial Insertion ROLL Packaging AMMO Packaging REEL Packaging 340 max. 370 max. 30± 1 25± max. 500 max. 50 max. 70 max. 340 max. 490 max. BAR COE (Labelling) Labelling of package units in plain text and with alphanumerical Bar Code Scanner decoding of WIMA supplier number Customer s P/O number Customer s part number WIMA confirmation number WIMA part number Lot number ate code Quantity In addition part description of article capacitance value rated voltage dimensions capacitance tolerance packing as well as gross weight and customer s name are indicated in plain text. BARCOE Code max. 340 max. 50 max. B 145
7 Packing Quantities for Capacitors with Radial Pins in PCM 2.5 mm to 22.5 mm PCM 2.5 mm 5 mm 7.5 mm 10 mm 15 mm 22.5 mm pcs. per packing unit Size ROLL REEL AMMO bulk P 360 P x x 370 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 W H L Codes S N O F I H J A C B B C E F A B C E F G H I J K L M N A B C E F G A FA C FB F G H I B FC C F FE F FF H J FG M A B FH F FI 540* G 680* H 680* I 680* FJ 450* * TPS (Tray-Packing-System). Plate versions may have different packing units. Moulded versions. Rights reserved to amend design data without prior notification. Samples and pre-production needs on request. 146
8 Packing Quantities for Capacitors with Radial Pins in PCM 27.5 mm to 52.5 mm PCM 27.5 mm 37.5 mm 48.5 mm 52.5 mm pcs. per packing unit Size ROLL REEL AMMO bulk P 360 P x x 370 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 W H L Codes S N O F I H J A C B A 640* 460/340* B 544* 380/280* * FK 336* F 384* FL 288* G 176* I 176* FM 216* J 144* A 480* B 408* C 252* * E 132* F 108* G 108* H 84* I 72* J 35* K 28* * E 72* H 60* J 48* L 25* F 25* H 20* J 20* * for 2-inch transport pitches. Moulded versions. Rights reserved to amend design data without prior notification. * TPS (Tray-Packing-System). Plate versions may have different packing units. Samples and pre-production needs on request. 147
9 WIMA Part Number System A WIMA part number consists of 18 digits and is composed as follows: Field 1-4: Type description Field 5-6: Rated voltage Field 7-10: Capacitance Field 11-12: Size and PCM Field 13-14: Version code (e.g. Snubber versions) Field 15: Capacitance tolerance Field 16: Packing Field 17-18: Pin length (untaped) M K S 2 C A 0 0 M S S MKS 2 63 VC 0.01 mf 2.5 x 6.5 x % bulk 6-2 Type description: Rated voltage: Capacitance: Size: Tolerance: SM-PET = SMT 2.7 VC = AI 22 pf = x 3.3 x 3 Size 1812 = KA 20 % = M SM-PPS = SMI 12 VC = AN 47 pf = x 3.3 x 4 Size 1812 = KB 10 % = K FKP 02 = FKP0 16 VC = A0 100 pf = x 5.1 x 3.5 Size 2220 = QA 5 % = J MKS 02 = MKS0 32 VC = AH 150 pf = x 5.1 x 4.5 Size 2220 = QB 2.5 % = H FKS 2 = FKS2 48 VC = AQ 220 pf = x 6.1 x 3 Size 2824 = TA 1 % = E FKP 2 = FKP2 50 VC = B0 330 pf = x 6.1 x 5 Size 2824 = TB... MKS 2 = MKS2 56 VC = B1 470 pf = x 7.6 x 5 Size 4030 = VA MKP 2 = MKP2 63 VC = C0 680 pf = x 10.2 x 6 Size 5040 = XA FKS 3 = FKS3 64 VC = CA 1000 pf = x 13.7 x 7 Size 6054 = YA Packing: FKP 3 = FKP3 100 VC = pf = x 7 x 4.6 PCM 2.5 = 0B AMMO H x 340 = A MKS 4 = MKS4 125 VC = A 2200 pf = x 7.5 x 4.6 PCM 2.5 = 0C AMMO H x 370 = B MKP 4 = MKP4 250 VC = F pf = x 6.5 x 7.2 PCM 5 = 1A AMMO H x 340 = C MKP 10 = MKP1 400 VC = G pf = x 7.5 x 7.2 PCM 5 = 1B AMMO H x 370 = FKP 4 = FKP4 450 VC = H pf = x 7 x 10 PCM 7.5 = 2A REEL H = F FKP 1 = FKP1 600 VC = I mf = x 8.5 x 10 PCM 7.5 = 2B REEL H = H MKP-X2 = MKX2 630 VC = J mf = x 9 x 13 PCM 10 = 3A REEL H = I MKP-X2 R = MKXR 700 VC = K mf = x 9 x 13 PCM 10 = 3C REEL H = J MKP-Y2 = MKY2 800 VC = L0 0.1 mf = x 11 x 18 PCM 15 = 4B ROLL H16.5 = N MP 3-X2 = MPX2 850 VC = M mf = x 12.5 x 18 PCM 15 = 4C ROLL H18.5 = O MP 3-X1 = MPX1 900 VC = N mf = x 14 x 26.5 PCM 22.5 = 5A BLISTER W = P MP 3-Y2 = MPY VC = O1 1 mf = x 15 x 26.5 PCM 22.5 = 5B BLISTER W = Q MP 3R-Y2 = MPRY 1100 VC = P0 2.2 mf = x 19 x 31.5 PCM 27.5 = 6A BLISTER W = R Snubber MKP = SNMP 1200 VC = Q0 4.7 mf = x21 x 31.5 PCM 27.5 = 6B BLISTER W = T Snubber FKP = SNFP 1250 VC = R0 10 mf = x 19 x 41.5 PCM 37.5 = 7A Bulk/TPS Standard = S GTO MKP = GTOM 1500 VC = S0 22 mf = x 22 x 41.5 PCM 37.5 = 7B... C-LINK MKP 3 = CP VC = T0 47 mf = x 49 x 182 CH_ = H0 C-LINK MKP 4 = CP VC = U0 100 mf = x 77 x 182 CH_ = H1 C-LINK MKP 4S = CPS 2500 VC = V0 220 mf = C-LINK MKP 5 = CP VC = W0 1 F = A010 C-LINK MKP 6 = CP VC = X0 2.5 F = A025 C-LINK HC = CH_ 6000 VC = Y0 50 F = A500 Version code: C-LINK HY = CHY 250 VAC = 0W 100 F = B100 Standard = 00 Pin length (untaped) SuperCap S = SCSS 275 VAC = 1W 125 F = B125 Version A1 = 1A 3.5 ±0.5 = C9 SuperCap H = SCSH 300 VAC = 2W 500 F = B500 Version A1.1.1 = 1B 6-2 = S SuperCap M = SCM_ 400 VAC = 3W 1200 F = C120 Version A2 = 2A 16 ±1 = P1 440 VAC = 4W VAC = 5W The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the pages of the respective WIMA range. 142
WIMA MKS 2. Metallized Polyester (PET) Capacitors in PCM 5 mm. Typical Applications. Construction. Packing. Mechanical Tests
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications e.g.
More informationWIMA MKS 2. Metallized Polyester (PET) Capacitors in PCM 5 mm. Typical Applications. Construction. Packing. Mechanical Tests
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications e.g.
More informationWIMA MKS 2. Metallized Polyester (PET) Capacitors in PCM 5 mm. Capacitances from 0.01 mf to 10 mf. Rated Voltages from 50 VDC to 630 VDC.
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm. Capacitances from 0.01 mf to 10 mf. Rated Voltages from 50 VC to 630 VC. Special Features High volume/capacitance ratio Self-healing AEC-Q200
More informationCapacitance range: 1000 pf to 10 mf (E12-values on request) Rated voltages: 16 VDC 50 VDC 63 VDC 100 VDC 250 VDC 400 VDC 630 VDC
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications e.g.
More informationWIMA FKS 2. Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm. Typical Applications. Construction. Mechanical Tests.
WIMA FKS 2 Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm Special Features Pulse duty construction According to RoHS 2011/65/EU Typical Applications For general C-applications
More informationWIMA MP 3-Y2. Metallized Paper (MP) RFI-Capacitors Class Y2 PCM 10 mm and 15 mm. Typical Applications. Construction. Packing.
WIMA MP 3-Y2 Metallized Paper (MP) RFI-Capacitors Class Y2 PCM 10 mm and 15 mm Special Features Particularly high reliability against active and passive flammability Excellent self-healing as well as high
More information300 VAC* W H L PCM** Part number 1000 pf MKY22W11003D MKY22W11503D MKY22W12203D00
WIMA MKP-Y2 Metallized Polypropylene (PP) RFI-Capacitors Class Y2 in PCM 10 mm to 37.5 mm. Capacitances from 1000 pf to 1.0 mf. Rated Voltage 300 VAC. Special Features Reliable self-healing High degree
More informationCountry Authority Specification. Germany VDE IEC USA/Canada UL UL CAN/CSA-E Mechanical Tests
WIMA MP 3-Y2 / 3R-Y2 Metallized Paper (MP) RFI-Capacitors Class Y2 in PCM 10 mm to 27.5 mm. Capacitances from 1000 pf to 0.1 mf. Rated Voltages 250 VAC and 300 VAC. Special Features Particularly high reliability
More information0.01 mf MKX2AW21002C MKX2AW21003F MKX2AW21502C MKX2AW21503F00
WIMA MKP-X2 Metallized Polypropylene (PP) RFI-Capacitors Class X2 in PCM 7.5 mm to 37.5 mm. Capacitances from 1000 pf to 10 mf. Rated Voltage 305 VAC. Special Features Reliable self-healing High degree
More informationWIMA FKS 2. Typical Applications. Construction. Mechanical Tests. Packing
WIMA FKS 2 Polyester (PET) Film/Foil Capacitors for Pulse Applications in PCM 5 mm. Capacitances from 1000 pf to 0.047 mf. Rated Voltages from 63 VC to 630 VC. Special Features Pulse duty construction
More informationWIMA FKP 02. Typical Applications. Construction. Packing. Mechanical Tests
WIMA FKP 02 Polypropylene (PP) Film/Foil Capacitors for Pulse Applications in PCM 2.5 mm. Capacitances from 100 pf to 0.01 mf. Rated Voltages from 63 VC to 400 VC. Special Features Pulse duty construction
More informationWIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus
More informationWIMA FKP 2. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM 5 mm. Typical Applications. Construction.
WIMA FKP 2 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM mm Special Features Pulse duty construction Close tolerances up to ±2. % (±1 % on request) Very low dissipation factor
More informationWIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus
More informationWIMA DC-LINK MKP 4. Metallized Polypropylene (PP) - Capacitors for DC-Link Applications. Typical Applications. Construction.
WIM C-LINK MKP 4 Metallized Polypropylene (PP) - Capacitors for C-Link pplications Special Features Capacitances up to 150 mf High volume/capacitance ratio Excellent self-healing properties Very low dissipation
More informationWIMA FKP 2. Typical Applications. Construction. Mechanical Tests. Packing
WIMA FKP 2 Polypropylene (PP) Film/Foil Capacitors for Pulse Applications in PCM mm. Capacitances from 33 pf to 0.033 mf. Rated Voltages from 63 VC to 1000 VC. Special Features Pulse duty construction
More information100 khz 4 x x MHz 10 x Mechanical Tests
WIMA FKP 2 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM mm Special Features Pulse duty construction Close tolerances up to ±2. % (±1 % on request) Very low dissipation factor
More informationWIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus
More information50 VDC 10 V 63 VDC 50 V. 1 x 10 4 M (mean value: 2 x 10 4 M ) Measuring time: 1 min. Test voltage: 1.6 U r, 2 sec. Maximum pulse rise time:
WIMA MKS 02 Metallize Polyester (PET) Capacitors in PCM 2.5 mm Special Features igh volume/capacitance ratio an reuce base PCM 2.5 mm Self-healing Accoring to RoS 2002/95/EC Typical Applications For general
More informationWIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus
More informationWIMA MKP 4. Metallized Polypropylene (PP) Capacitors PCM 7.5 mm to 37.5 mm. Typical Applications. Construction. Packing.
WIMA MKP 4 Metallized Polypropylene (PP) Capacitors PCM 7.5 mm to 37.5 mm Special Features High volume/capacitance ratio Self-healing Very low dissipation factor Negative capacitance change versus temperature
More informationWIMA MKS 4. Metallized Polyester (PET) Capacitors PCM 7.5 mm to 37.5 mm. Typical Applications. Construction. Packing.
Metallized Polyester (PET) Capacitors PCM 7.5 mm to 37.5 mm Special Features Electrical ata High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications
More informationWIMA FKS 3. Polyester (PET) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKS 3 Polyester (PET) Film an Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse uty construction Accoring to RoS 2002/95/EC Typical Applications For general C-applications
More informationWIMA MKS 4. Typical Applications. Construction. Mechanical Tests. Packing. High volume/capacitance ratio Self-healing According to RoHS 2011/65/EU
WIMA MKS 4 Metallized Polyester (PET) Capacitors in PCM 7.5 mm to 52.5 mm. Capacitances from 1000 pf to 680 mf. Rated Voltages from 50 VC to 2000 VC. Special Features Electrical ata High volume/capacitance
More informationWIMA FKM 2. Film and Foil Capacitors with Mixed Dielectric for Pulse Applications in PCM 5 mm. Typical Applications. Construction.
WIMA FKM 2 Film an Foil Capacitors with Mixe ielectric for Pulse Applications in PCM 5 mm Special Features Pulse uty construction Constant capacitance value versus temperature (similar to the obsolete
More informationWIMA FKP 3. Typical Applications. Construction. Packing. Mechanical Tests
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM 7.5 mm to 15 mm. Capacitances from 100 pf to 0.22 mf. Rated Voltages from 63 VC to 1000 VC. Special Features Pulse duty
More informationWIMA FKS 2. Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm. Typical Applications. Construction. Packing.
WIMA FKS 2 Polyester (PET) Film an Foil Capacitors for Pulse Applications in PCM 5 mm Special Features Pulse uty construction Accoring to RoS 2002/95/EC Typical Applications For general C-applications
More informationCapacitance range: 1000 pf to 10 mf (E12-values on request) Rated voltages: 100 VDC 250 VDC 400 VDC 630 VDC 850 VDC 1000 VDC 1600 VDC 2000 VDC
WIMA MKP 4 Metallized Polypropylene (PP) Capacitors in PCM 7.5 mm to 37.5 mm. Capacitances from 1000 pf to 10 mf. Rated Voltages from 100 VC to 2000 VC. Special Features High volume/capacitance ratio Self-healing
More informationWIMA FKP 4. Typical Applications. Construction. Packing. Mechanical Tests
WIMA FKP 4 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts and Self-Healing, Internal Series Connection for Increased Current Carrying Capability PCM
More informationWIMA MKP-X2. Continuation. General Data
WIMA MKP-X2 Metallize Polypropylene (PP) RFI-Capacitors Class X2 PCM 7.5 mm to 27.5 mm Special Features Reliable self-healing igh egree of interference suppression ue to goo attenuation an low ESR Accoring
More informationMetallized Polypropylene (PP) - Capacitors for DC-Link Applications. Capacitances from 1.0 mf to 400 mf. Rated Voltages from 400 VDC to 1300 VDC.
WIM C-LINK MKP 4 Metallized Polypropylene (PP) - Capacitors for C-Link pplications. Capacitances from 1.0 mf to 400 mf. Rated Voltages from 400 VC to 1300 VC. Special Features Capacitances up to 400 mf
More informationCapacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:
WIMA FKP 1 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts, ouble-sided Metallization and Self-Healing Internal Series Connection for Highest Current
More informationCapacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:
WIMA FKP 1 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts, ouble-sided Metallization and Self-Healing Internal Series Connection for Highest Current
More informationCountry Authority Specification Symbol. Mounting Recommendation
WIMA MP 3-X2 Metallize Paper (MP) RFI-Capacitors Class X2 PCM 10 mm to 27.5 mm Special Features Particularly high reliability against active an passive flammability Excellent self-healing as well as high
More informationWIMA FKP 4. Typical Applications. Construction. Packing. Mechanical Tests
WIMA K 4 olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts an Self-ealing, Internal Series Connection for Increase Current Carrying Capability CM 1 mm to 37.
More informationCapacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:
olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts, ouble-sie Metallization an Self-ealing Internal Series Connection for ighest Current Carrying Capability 1
More informationCapacitance range: mf to 25 mf Rated voltages: 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC
WIMA Snubber MKP Snubber MKP Capacitors for Pulse Applications with ouble-sided Metallized Electrodes, Schoopage Contacts and Internal Series Connection Special Features Pulse duty construction Self-healing
More informationFilm Capacitors. Metallized Polyester Film Capacitors (MKT) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32591... B32594 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto
More informationFilm Capacitors. Metallized Polyester Film Capacitors (MKT-S) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT-S) Series/Type: B32537 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
More informationR82. p = 5mm. MKT Series R 8 2 C -
Loose All dimensions are in mm. Taped R82 Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. p = 5mm B
More informationMSB Metallized polyester film capacitor MKT - High performance
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor run applications. Low power switching applications. Low pulse operation
More informationCeramic disc capacitors (kinked leads) Class 2, low loss (0.2% max.) 500 V; 1 kv; 2 kv; 3 kv
FEATURES High reliability Low losses High capacitance in small size Kinked leads. APPLICATIONS In electronic circuits where low losses and high capacitance per volume are essential, for example: SMPS HF
More informationPolyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
More informationPrinted Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G capacitor is a polypropylene metallized film capacitor with a polyester tape wrapping filled with resin, and uses tinned
More informationPolypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 Series is constructed of metallized polypropylene
More informationEMI Suppression Capacitors
Construction Plastic case (UL 94 V-0) Epoxy resin sealing, flame-retardant Axial leads, insulating sleeve (type B8119 Self-healing Smallest possible dimensions Terminals Parallel wire leads, tinned Two
More informationMTB. MKT box with radial terminals small size general purpose. Ed. 04 Rev Dissipation factor (DF), max. tgδ x10-4, measured at 25 ±5 C
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low pulse operation Dielectric Polyester Electrodes Vacuum
More informationPrinted Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical
More informationMetallized Polypropylene Film Capacitors (MKP)
Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: July 2015 B32656S... B32658S EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures
More informationApplications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor
More informationApplications R71 M F 2100 AA 00 J
Polypropylene Pulse/High Frequency Capacitors R71 Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Overview The R71 is constructed of metallized polypropylene film with radial leads
More informationAccording to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency
More informationPHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS CONSTRUCTION L B Pulse operation in SMPS, TV, monitor, electrical ballast and
More informationRated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
More informationApplications R46 K I M
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V 0. Applications For worldwide
More information1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
More informationFailure quota 300/10 9 component hours. Warning: this specification must be completed with the data given in the General technical information chapter
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
More informationPrinted Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical
More informationCommon to almost all eco-friendly lighting.
A series on topics of relevance and advances from the Technical Centre, Deki Electronics Ltd, India February 2012 Common to almost all eco-friendly lighting. RoHS compliant film capacitors from Deki. www.dekielectronics.com
More informationVAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
More informationCMK Metallized polycarbonate CECC approval, detail specification According to CECC 30500, IEC 384-6
Metallized polycarbonate CECC approval, detail specification 30501-020 According to CECC 30500, IEC 384-6 TYPICAL APPLICATIONS Automotive and other applications in high ambient temperatures. Stable filters,
More informationMetallized Polypropylene Film Capacitor DC-Link capacitor
Metallized Polypropylene Film Capacitor DC-Link capacitor APPLICATIONS Industrial and high-end power supplies High performance DC filtering Frequency converters Solar inverters Renewable energies inverters
More informationPPS. MKP axial terminals snubber medium-high pulse applications high current high frequency switching. Ed. 04 Rev
Main applications Snubber, energy conversion and control in power semiconductor circuits, industrial and motor speed controls, SMPS, induction heaters, high voltage, high current and medium-high pulse
More informationTHIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Features... 2 Applications... 2 Approvals... 2 Part Marking... 3 System... 4 Absolute Ratings... 4 Fuse Configuration and Dimensions... 5 Specifications...
More informationMAB - (Updated approval references)
Main applications Motor run capacitor, general purpose AC applications, medium-low power switching capacitor for industrial and motor speed controls, electronic ballasts and SMPS Dielectric Polypropylene
More informationAC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type
www.vishay.com AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES Low loss dielectric Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationConfiguration. Specification: Capacitance Range. Insulation Resistance. Maximum Pulse Rise Time(V/μsec.): Shown As Following Table.
Metallized Polyester Film s (Radial Dipped) Configuration FEATURES Self healing characteristics. Miniature size, light in weight. High stability of temperature vs. Cap. and tanδ. High density thermosetting
More informationApplications R47 5 I M
R47 Series, Class X2, 520 VAC, 85ºC (Automotive Grade) Overview The R47 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the
More informationmm. Film dielectric trimmers QUICK REFERENCE DATA
5 mm FEATURES Housing diameter 5 mm Top and bottom or top adjustment Round or hexagonal head Vertical version. APPLICATIONS For consumer and industrial equipment. DESCRIPTION The vanes of the trimmer are
More informationCCDSeries FEATURES ORDERING CODE CCD B 101 K H 7 2 (1) (2) (3) (4) (5) (6) (7) (8) (9) Safety Standard Recognized Ceramic Capacitors
CCDSeries Safety Standard Recognized Ceramic s Configuration FEATURES Complying with IEC60384-14 4 th Edition Class X1Y1 and Class X1Y2 Dielectric Strength: AC2600V (r.m.s) for X1Y2 and AC4000V (r.m.s)
More informationApplications R46 3 N M. Capacitance Code (pf)
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements of UL 94 V 0. Applications For worldwide
More information1 x 10 4 M (mean value: 5 x 10 4 M ) Measuring time: 1 min. Dissipation factors at +20) C: tan d U 250 VDC 100 V
IMA SM-N Metallize olyethylene-naphthalate (N) SM ilm Capacitors with Box ncapsulation Special eatures Size coes 1812, 2220, 2824, 4030, 5040 an 6054 with N an encapsulate Operating temperature up to 125
More informationResin-Coated, Radial-Leaded Solid Tantalum Capacitors
FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*
More informationPSB / RSB - (Expanded range)
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, resonant circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and
More informationØ 5 mm Film Dielectric Trimmers
Ø 5 mm Film Dielectric Trimmers FEATURES Housing diameter 5 mm Top and bottom or top adjustment Round head Mounting: radial Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationWF12SR360JTL. Size Surge 5% chip resistors. Customer : Approval No : Issue Date : Customer Approval :
SPECIFICATION OF SURGE 5% CHIP RESISTOR Ver: 1 Page: 1 of 7 ROHS compliance WF12SR360JTL Surge 5% chip resistors Size 1206 Customer : Approval No : Issue Date : Customer Approval : SPECIFICATION OF SURGE
More informationMPPB Series. Metallized Polypropylene Film Capacitor Box type. Metallized Polypropylene Film Capacitor - Box type Features. Typical Applications
Metallized Polypropylene Film Capacitor - Box type Features Metallized polypropylene structure Low loss at high frequency Small inherent temperature rise Plastic case (UL94 V-0), Epoxy resin sealing RoHS
More informationElectrical Specifications 5mm. Ic (A) (V)
Features: AC operating voltage from 11V to 1000V DC operating voltage from 14V to 1465V Peak current up to 6500 amps Energy handling up to 625J UL1449 certified file no. E476752 Operating temperature range
More informationContact: Customer Service Phone: Fax: esales.electrocube.com Website:
Supplier: Electrocube, Inc., 3366 Pomona Blvd., Pomona, California 91768 Contact: Customer Service Phone: 909-595-4037 Fax: 909-595-0186 Email: esales..com Website: www..com Date: 01/02/13 Quality Assurance
More informationTHZ NEW - In Progress
Main applications AC power applications, input-output AC filtering, harsh environment applications Dielectric Polypropylene Electrodes Vacuum deposited metal layers Coating Solvent resistant plastic case
More information100V 160V 200V 250V 400V
CL12 Polyester Film Capacitors Structures: Polypropylene film, non- inductive, phenolic resin coating Features: Excellent frequency and temperature characteristics, Very small loss even at high frequency.
More informationGeneral Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, VDC.
General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, 50 630 VDC Overview Dual in-line (DIL) metallized polyester (PET) film capacitor. Encapsulation
More informationPolypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Overview The R76 Series is constructed of polypropylene
More informationApplications C87 8 B F AA 4 J
C87, Cylindrical Aluminum Case, Overpressure Protection, 420 VAC/470 VAC Overview C87 is a polypropylene metallized film, with a cylindrical aluminium can-type construction filled with resin. It uses faston,
More informationSpecification. N1206 F Series. Approved by. Date of Establish : (Ref. No : 1206 F_Rev.2)
Specification Product Type SMD(Micro) Fuse N1206 F Series Approved by Date of Establish : 2012.11.01(Ref. No : 1206 F_Rev.2) 1. Scope This specification covers the detail requirements for SMD Micro fuse
More informationApplications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor
More informationDrawing : STHVF series. Screw Nut. Capacitor Marking. HK Film Capacitor Ltd
2.1 High Voltage Filter Capacitors : STHVF : with screw Nut at Capacitor both Ens STHVF-A : with Copper Lea at Capacitor both Ens ( Axial Lea ) Applications : - By-pass DC / AC Filtering, Transient an
More informationApplications R46 K I M
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements of UL 94 V 0. Applications For worldwide
More informationEnergy sector DC LINK CAPACITORS AND SNUBBERS
Energy sector DC LINK CAPACITORS AND SNUBBERS DC link APPLICATIONS Hybrid vehicles Wind plants Solar power plants Electric energy generation from sea waves Medical equipment Industrial equipment Car electronics
More informationApplications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T
MDS, Dual In-Line Low Profile, 50 630, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor is encapsulated in a self-extinguishing material, meeting the requirements of UL
More informationfilm capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.001μF to 10μF Capacitance tolerance ± 10 %, ± 20 % Rated
More informationCGA Series Automotive Grade Capacitors
CGA Series Automotive Grade Capacitors Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before
More information1.0 Rated Values and Operational Data
Applications Protection and Commutation Power Electronics Impulsional devices with intensive / High Current Switching Power Supplies Main Characteristics Dry film-foil technology Nominal Voltage: 630 VDC
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
More informationMHBS (MHB version S) NEW in progress
Main applications Switching capacitor for industrial and motor speed controls, DClink, SMPS, induction heaters, suitable for AC applications Main characteristics High voltage and high capacitance in small
More informationNTC thermistors, high-temperature sensors /7/8...
FEATURES Small diameter Quick response to temperature change High stability over a long life Wide temperature range from 40 to +300 C Resistant to corrosive atmospheres and harsh environments. APPLICATION
More informationXKT. Metal Oxide Varistor FEATURES
FEATURES Operating Temperature Range: -40 ~+105 Body Diameters Range From 5D to 20D Wide Operating from 18V to 1800V Full compliance with RoHS and REH DIMENSION L: 16mm min SIZE D MAX H MAX d+/-0.05 E
More informationWR10X ±1%, ±5% General purpose chip resistors Size 1210
WR10X ±1%, ±5% General purpose chip resistors Size 1210 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR10X Version 02 Jun.-2005 FEATURE 1. High reliability and stability 2. Reduced
More informationTABLE of contents. Metal Oxide Varistor (MOV) Varistors-5D Series Varistors-7D Series Varistors-10D Series... 5
TABLE of contents Subject Page Metal Oxide Varistor (MOV)..................................................... 1 Varistors-5D Series............................................................ 3 Varistors-7D
More informationApplications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T
Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications
More information