According to IEC , grade 1.1
|
|
|
- Grace Spencer
- 5 years ago
- Views:
Transcription
1 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1 TYPICAL APPLICATIONS Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency applications demanding stable operation. Rated voltage U R, VDC Rated voltage U R, VAC Capacitance range, µf Capacitance values Capacitance tolerance Category temperature range Rated temperature Voltage derating Climatic category Maximum pulse steepness: Temperature coefficient Self-inductance Dissipation factor tanδ Insulation resistance CONSTRUCTION Polypropylene film capacitor with vacuum evaporated aluminum electrodes. Radial leads of tinned wire are electrically welded to the contact metal layer on the ends of the capacitor winding. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0. TECHNICAL DATA In accordance with IEC E12 series ±5%, other tolerances on request C +85 C The rated voltage is decreased with 1.3%/ C between +85 C and +105 C. IEC , 55/105/56 DIN 40040, FMD C Average relative humidity 80% RH 100% for 30 days per year. RH = 90% for further days limited by average value per year. du/dt according to article table For peak to peak voltages lower than rated voltage (U PP < U R ), the specified du/dt can be multiplied by the factor U R /U PP. 200 (+50, 100) ppm/ C (at 1 khz) Approximately 6 nh/cm for the total length of capacitor winding and the leads. Maximum values at +23 C C 0.1 µf 0.1µF < C 1.0 µf C > 1.0 µf 1 khz 0.05% 0.05% 0.10% 10 khz 0.10% 100 khz 0.25% Measured at +23 C, 100 VDC 60 s for U R < 500 VDC and at 500 VDC for U R 500 VDC Between terminals: 0.33 µf: MΩ C > 0.33 µf: s Between terminals and case: MΩ. L B H 0.5 p d l b p d std I max I b ± ±
2 TYPICAL DATA C/C% C/C% C Capacitance vs. temperature (at 1 khz) khz Capacitance vs. frequency (at +23 C) MΩ µf tanδ % C Insulation resistance vs. temperature C Dissipation factor vs. temperature (at 1 khz) tanδ % Z (Ω) khz Dissipation factor vs. frequency (at +23 C) Resonance frequencies PHE 426 Lead spacing 5 mm 100 MHz Z (Ω) pf µf 0.01 µf 1000 pf MHz Resonance frequencies PHE 426 Lead spacing 7.5 to 37.5 mm 188
3 DERATING OF U RMS VS FREQUENCY, +85 C AMBIENT TEMPERATURE AND 10 C INTERNAL HEATING, TYPICAL VALUES Urms (V) 250 VDC/160VAC U rms (V) 300 VDC/160 VAC U rms (V) 400 VDC/220 VAC µf 0.33 µf µf 0.1 µf 0.68 µf µf µf µf 4.7 µf µf 4.7 µf 0.22 µf 0.82 µf Frequency (khz) Frequency (khz) Frequency (khz) 2.5 µf U rms (V) 630 VDC/250 VAC U rms (V) 1000 VDC/250 VAC µf µf 0.27 µf More simulation possibilities in PCCAD software package. See page µf Frequency (khz) Frequency (khz) ENVIRONMENTAL TEST DATA Damp heat test Test conditions: T = +40 C, RH = 93%, t = 56 days. Test criteria: C/C ±1%, tanδ (1kHz), I R after test 0.5 x I R min. Endurance test Test conditions: T +85 C, U = 1.25 x U R, t = 2000 h. Test criteria: C/C ±1%, tanδ (10 khz), for C R 1 µf tanδ (1 khz), for C R > 1 µf I R after test 0.5 x I R min. Capacitance drift Max. 1.5% after a 2 year storage period at a temperature of C and a relative humidity of %. ORDERING INFORMATION See article table and page 21. MARKING RIFA Article code Rated capacitance according to IEC Capacitance tolerance code Rated voltage Manufacturing code (year, month) PACKING The box dimensions for bulk packaging are 245 x 145 x 80 mm. Quantity/package as in article table, based on standard lead length. Reels with taped capacitors are packed 10 in a box with the dimensions 370 x 370 x 560 mm. Quantity per reel as in article table. The standard quantity/reel is for 360 mm reel. If 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity. 189
4 ARTICLE TABLE Capaci- Max dimensions in mm Quantity per package Weight Max Rthha C/W Article code 100 VDC/63 VAC LEAD SPACING 5 MM PHE426DJ4100J PHE426DJ4120J PHE426DJ4150J PHE426DJ4180J PHE426DJ4220J PHE426DJ4270J PHE426DJ4330J PHE426DJ4390J PHE426DJ4470J PHE426DJ4560J PHE426DJ4680J PHE426DJ4820J PHE426DJ5100J PHE426DJ5120J PHE426DJ5150J PHE426DJ5180J PHE426DJ5220J PHE426DJ5270J PHE426DJ5330J PHE426DJ5390J PHE426DJ5470J PHE426DJ5560J PHE426DJ5680J PHE426DJ5820J PHE426DJ6100J PHE426DJ6120J PHE426DJ6150J 250 VDC/160 VAC LEAD SPACING 5 MM PHE426HJ4100J PHE426HJ4120J PHE426HJ4150J PHE426HJ4180J PHE426HJ4220J PHE426HJ4270J PHE426HJ4330J PHE426HJ4390J PHE426HJ4470J PHE426HJ4560J PHE426HJ4680J PHE426HJ4820J PHE426HJ5100J PHE426HJ5120J PHE426HJ5150J PHE426HJ5180J PHE426HJ5220J PHE426HJ5270J PHE426HJ5330J PHE426HJ5390J PHE426HJ5470J PHE426HJ5560J PHE426HJ5680J PHE426HJ5820J PHE426HJ6100J PHE426HJ6120J PHE426HJ6150J 190
5 ARTICLE TABLE Capaci- Max dimensions in mm Quantity per package Weight Max Rthha C/W Article code 250 VDC/160 VAC LEAD SPACING 7.5 MM PHE426HK4100J PHE426HK4120J PHE426HK4150J PHE426HK4180J PHE426HK4220J PHE426HK4270J PHE426HK4330J PHE426HK4390J PHE426HK4470J PHE426HK4560J PHE426HK4680J PHE426HK4820J PHE426HK5100J PHE426HK5120J PHE426HK5150J PHE426HK5180J PHE426HK5220J PHE426HK5270J PHE426HK5330J PHE426HK5390J PHE426HK5470J PHE426HK5560J PHE426HK5680J PHE426HK5820J PHE426HK6100J PHE426HK6120J PHE426HK6150J LEAD SPACING 10 MM PHE426HA5680J PHE426HA5820J PHE426HA6100J PHE426HA6120J PHE426HA6150J PHE426HA6180J PHE426HA6220J LEAD SPACING 15 MM PHE426HB6180J PHE426HB6220J PHE426HB6270J PHE426HB6330J PHE426HB6390J PHE426HB6470J PHE426HB6560J PHE426HB6680J PHE426HB6820J PHE426HB7100J LEAD SPACING 22.5 MM PHE426HD6680J PHE426HD6820J PHE426HD7100J PHE426HD7120J PHE426HD7150J PHE426HD7180J PHE426HD7220J PHE
6 ARTICLE TABLE Capaci- Max dimensions in mm Quantity per package Weight Max Rthha C/W Article code 250 VDC/160 VAC LEAD SPACING 27.5 MM PHE426HF7220J PHE426HF7270J PHE426HF7330J PHE426HF7390J PHE426HF7470J PHE426HF7560J PHE426HF7680J PHE426HF7820J PHE426HF8100J LEAD SPACING 37.5 MM PHE426HR7470J PHE426HR7560J PHE426HR7680J PHE426HR7820J PHE426HR8100J PHE426HR8120J PHE426HR8150J PHE426HR8180J PHE426HR8200J 300 VDC/160 VAC LEAD SPACING 10 MM PHE426JA5330J PHE426JA5390J PHE426JA5470J PHE426JA5560J PHE426JA5680J PHE426JA5820J PHE426JA6100J PHE426JA6120J PHE426JA6150J LEAD SPACING 15 MM PHE426JB6100J PHE426JB6120J PHE426JB6150J PHE426JB6180J PHE426JB6220J PHE426JB6270J PHE426JB6330J PHE426JB6390J PHE426JB6470J PHE426JB6560J PHE426JB6680J LEAD SPACING 22.5 MM PHE426JD6330J PHE426JD6390J PHE426JD6470J PHE426JD6560J PHE426JD6680J PHE426JD6820J PHE426JD7100J PHE426JD7120J PHE426JD7150J
7 ARTICLE TABLE Capaci- Max dimensions in mm Quantity per package Weight Max Rthha C/W Article code 300 VDC/160 VAC LEAD SPACING 27.5 MM PHE426JF7100J PHE426JF7120J PHE426JF7150J PHE426JF7180J PHE426JF7220J PHE426JF7270J PHE426JF7330J PHE426JF7390J PHE426JF7470J PHE426JF7560J PHE426JF7680J LEAD SPACING 37.5 MM PHE426JR7330J PHE426JR7390J PHE426JR7470J PHE426JR7560J PHE426JR7680J PHE426JR7820J PHE426JR8100J PHE426JR8120J PHE426JR8150J 400 VDC/220 VAC LEAD SPACING 5 MM PHE426KJ4100J PHE426KJ4120J PHE426KJ4150J PHE426KJ4180J PHE426KJ4220J PHE426KJ4270J PHE426KJ4330J PHE426KJ4390J PHE426KJ4470J PHE426KJ4560J PHE426KJ4680J PHE426KJ4820J PHE426KJ5100J PHE426KJ5120J PHE426KJ5150J PHE426KJ5180J PHE426KJ5220J PHE426KJ5270J PHE426KJ5330J PHE426KJ5390J PHE426KJ5470J PHE426KJ5560J PHE426KJ5680J LEAD SPACING 7.5 MM PHE426KK4100J PHE426KK4120J PHE426KK4150J PHE426KK4180J PHE426KK4220J PHE426KK4270J PHE426KK4330J PHE
8 ARTICLE TABLE Capaci- Max dimensions in mm Quantity per package Weight Max Rthha C/W Article code 400 VDC/220 VAC LEAD SPACING 7.5 MM PHE426KK4390J PHE426KK4470J PHE426KK4560J PHE426KK4680J PHE426KK4820J PHE426KK5100J PHE426KK5120J PHE426KK5150J PHE426KK5180J PHE426KK5220J PHE426KK5270J PHE426KK5330J PHE426KK5390J PHE426KK5470J PHE426KK5560J PHE426KK5680J LEAD SPACING 10 MM PHE426KA5220J PHE426KA5270J PHE426KA5330J PHE426KA5390J PHE426KA5470J PHE426KA5560J PHE426KA5680J PHE426KA5820J LEAD SPACING 15 MM PHE426KB5680J PHE426KB5820J PHE426KB6100J PHE426KB6120J PHE426KB6150J PHE426KB6180J PHE426KB6220J PHE426KB6270J PHE426KB6330J PHE426KB6390J PHE426KB6470J LEAD SPACING 22.5 MM PHE426KD6180J PHE426KD6220J PHE426KD6270J PHE426KD6330J PHE426KD6390J PHE426KD6470J PHE426KD6560J PHE426KD6680J PHE426KD6820J PHE426KD7100J 194
9 ARTICLE TABLE Capaci- Max dimensions in mm Quantity per package Weight Max Rthha C/W Article code 400 VDC/220 VAC LEAD SPACING 27.5 MM PHE426KF6560J PHE426KF6680J PHE426KF6820J PHE426KF7100J PHE426KF7120J PHE426KF7150J PHE426KF7180J PHE426KF7220J PHE426KF7270J PHE426KF7330J LEAD SPACING 37.5 MM PHE426KR7150J PHE426KR7180J PHE426KR7220J PHE426KR7270J PHE426KR7330J PHE426KR7390J PHE426KR7470J PHE426KR7560J PHE426KR7680J 630 VDC/250 VAC LEAD SPACING 5 MM PHE426MJ4100J PHE426MJ4120J PHE426MJ4150J PHE426MJ4180J PHE426MJ4220J PHE426MJ4270J PHE426MJ4330J PHE426MJ4390J PHE426MJ4470J PHE426MJ4560J PHE426MJ4680J PHE426MJ4820J PHE426MJ5100J PHE426MJ5120J PHE426MJ5150J PHE426MJ5180J PHE426MJ5220J PHE426MJ5270J PHE426MJ5330J PHE426MJ5390J PHE426MJ5470J LEAD SPACING 7.5 MM PHE426MK4100J PHE426MK4120J PHE426MK4150J PHE426MK4180J PHE426MK4220J PHE426MK4270J PHE426MK4330J PHE426MK4390J PHE
10 ARTICLE TABLE Capaci- Max dimensions in mm Quantity per package Weight Max Rthha C/W Article code 630 VDC/250 VAC LEAD SPACING 7.5 MM PHE426MK4470J PHE426MK4560J PHE426MK4680J PHE426MK4820J PHE426MK5100J PHE426MK5120J PHE426MK5150J PHE426MK5180J LEAD SPACING 10 MM PHE426MA5100J PHE426MA5120J PHE426MA5150J PHE426MA5180J PHE426MA5220J PHE426MA5270J PHE426MA5330J PHE426MA5390J PHE426MA5470J LEAD SPACING 15 MM PHE426MB5330J PHE426MB5390J PHE426MB5470J PHE426MB5560J PHE426MB5680J PHE426MB5820J PHE426MB6100J PHE426MB6120J PHE426MB6150J PHE426MB6180J PHE426MB6220J LEAD SPACING 22.5 MM PHE426MD6100J PHE426MD6120J PHE426MD6150J PHE426MD6180J PHE426MD6220J PHE426MD6270J PHE426MD6330J PHE426MD6390J PHE426MD6470J LEAD SPACING 27.5 MM PHE426MF6330J PHE426MF6390J PHE426MF6470J PHE426MF6560J PHE426MF6680J PHE426MF6820J PHE426MF7100J PHE426MF7120J PHE426MF7150J PHE426MF7180J 196
11 ARTICLE TABLE Capaci- Max dimensions in mm Quantity per package Weight Max Rthha C/W Article code 630 VDC/250 VAC LEAD SPACING 37.5 MM PHE426MR6820J PHE426MR7100J PHE426MR7120J PHE426MR7150J PHE426MR7180J PHE426MR7220J PHE426MR7270J PHE426MR7330J PHE426MR7390J 1000 VDC/250 VAC LEAD SPACING 10 MM PHE426PA4470J PHE426PA4560J PHE426PA4680J PHE426PA4820J PHE426PA5100J PHE426PA5120J PHE426PA5150J LEAD SPACING 15 MM PHE426PB5100J PHE426PB5120J PHE426PB5150J PHE426PB5180J PHE426PB5220J PHE426PB5270J PHE426PB5330J PHE426PB5390J PHE426PB5470J PHE426PB5560J PHE426PB5680J PHE426PB5820J LEAD SPACING 22.5 MM PHE426PD5330J PHE426PD5390J PHE426PD5470J PHE426PD5560J PHE426PD5680J PHE426PD5820J PHE426PD6100J PHE426PD6120J PHE426PD6150J PHE426PD6180J PHE426PD6220J LEAD SPACING 27.5 MM PHE426PF6100J PHE426PF6120J PHE426PF6150J PHE426PF6180J PHE426PF6220J PHE426PF6270J PHE426PF6330J PHE426PF6390J PHE
12 ARTICLE TABLE Capaci- Max dimensions in mm Quantity per package Weight Max Rthha C/W Article code 1000 VDC/250 VAC LEAD SPACING 27.5 MM PHE426PF6470J PHE426PF6560J PHE426PF6680J LEAD SPACING 37.5 MM PHE426PR6330J PHE426PR6390J PHE426PR6470J PHE426PR6560J PHE426PR6680J PHE426PR6820J PHE426PR7100J PHE426PR7120J PHE426PR7150J 198
PHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS CONSTRUCTION L B Pulse operation in SMPS, TV, monitor, electrical ballast and
CMK Metallized polycarbonate CECC approval, detail specification According to CECC 30500, IEC 384-6
Metallized polycarbonate CECC approval, detail specification 30501-020 According to CECC 30500, IEC 384-6 TYPICAL APPLICATIONS Automotive and other applications in high ambient temperatures. Stable filters,
Polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
R82. p = 5mm. MKT Series R 8 2 C -
Loose All dimensions are in mm. Taped R82 Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. p = 5mm B
Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Overview The R76 Series is constructed of polypropylene
PPS. MKP axial terminals snubber medium-high pulse applications high current high frequency switching. Ed. 04 Rev
Main applications Snubber, energy conversion and control in power semiconductor circuits, industrial and motor speed controls, SMPS, induction heaters, high voltage, high current and medium-high pulse
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 Series is constructed of metallized polypropylene
Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor
MSB Metallized polyester film capacitor MKT - High performance
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor run applications. Low power switching applications. Low pulse operation
Applications F 611 J F 104 M 050 C. First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F611 & F612 Series Metallized Polyester Film, 5 37.5 mm Lead Spacing, 50 1,000 VDC Overview The F611 and F612 Series is constructed of metallized winded
Applications R71 M F 2100 AA 00 J
Polypropylene Pulse/High Frequency Capacitors R71 Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Overview The R71 is constructed of metallized polypropylene film with radial leads
MTB. MKT box with radial terminals small size general purpose. Ed. 04 Rev Dissipation factor (DF), max. tgδ x10-4, measured at 25 ±5 C
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low pulse operation Dielectric Polyester Electrodes Vacuum
Film Capacitors. Metallized Polyester Film Capacitors (MKT) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32591... B32594 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto
Polypropylene Pulse/High Frequency Capacitors R75 Series Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R75 Series Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Overview The R75 Series is constructed of metallized
Applications SMR K 50 J01 L4 BULK. Capacitance Tolerance H = ±2.5% J = ±5% K = ±10% M = ±20% F 211 J F 104 K 050 C
Metallized Polyphenylene Sulfide, Stable +150 C High Temperature Capacitor Overview The SMR Series is a metallized polyphenylene sulfide film capacitor with vacuum-evaporated aluminum electrodes. Radial
Metallized Polypropylene Film Capacitors (MKP)
Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: July 2015 B32656S... B32658S EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures
Failure quota 300/10 9 component hours. Warning: this specification must be completed with the data given in the General technical information chapter
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
General Purpose, Pulse and DC Transient Suppression SMR, Metallized Polyphenylene Sulfide Film, +150 C, mm Lead Spacing, VDC
General Purpose, Pulse and DC Transient Suppression SMR, Metallized Polyphenylene Sulfide Film, +150 C, 5.0 27.5 mm Lead Spacing, 50 400 VDC Overview The SMR Series is a metallized polyphenylene sulfide
Energy sector DC LINK CAPACITORS AND SNUBBERS
Energy sector DC LINK CAPACITORS AND SNUBBERS DC link APPLICATIONS Hybrid vehicles Wind plants Solar power plants Electric energy generation from sea waves Medical equipment Industrial equipment Car electronics
Applications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T
Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications
Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
Film Capacitors. Metallized Polyester Film Capacitors (MKT-S) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT-S) Series/Type: B32537 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
MHBS (MHB version S) NEW in progress
Main applications Switching capacitor for industrial and motor speed controls, DClink, SMPS, induction heaters, suitable for AC applications Main characteristics High voltage and high capacitance in small
1.0 Rated Values and Operational Data
Applications Protection and Commutation Power Electronics Impulsional devices with intensive / High Current Switching Power Supplies Main Characteristics Dry film-foil technology Nominal Voltage: 630 VDC
MAB - (Updated approval references)
Main applications Motor run capacitor, general purpose AC applications, medium-low power switching capacitor for industrial and motor speed controls, electronic ballasts and SMPS Dielectric Polypropylene
General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, VDC.
General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, 50 630 VDC Overview Dual in-line (DIL) metallized polyester (PET) film capacitor. Encapsulation
THZ NEW - In Progress
Main applications AC power applications, input-output AC filtering, harsh environment applications Dielectric Polypropylene Electrodes Vacuum deposited metal layers Coating Solvent resistant plastic case
Ceramic disc capacitors (kinked leads) Class 2, low loss (0.2% max.) 500 V; 1 kv; 2 kv; 3 kv
FEATURES High reliability Low losses High capacitance in small size Kinked leads. APPLICATIONS In electronic circuits where low losses and high capacitance per volume are essential, for example: SMPS HF
Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type
www.vishay.com AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES Low loss dielectric Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
PSB / RSB - (Expanded range)
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, resonant circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and
Applications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T
MDS, Dual In-Line Low Profile, 50 630, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor is encapsulated in a self-extinguishing material, meeting the requirements of UL
1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Environmental Policy
Quality Policy KEMET exceeds customer expectations through operational excellence and continuous improvement. Zero Defects 100% On-Time Delivery Technology Leader Lowest Total Cost of Ownership Six Sigma
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
Product Specification March 7, 2017 V.16 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 100 nf RoHS compliant & Halogen Free Product specification
Multilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
MKT (Box) PCX MKP (Box) PCMP 389. MMKP (Box) PCMP 384. MMKP (Dipped) PCMP 483. MKP (Dipped) PCMP 489. MKT (Dipped) PCMT 362 PFC Input 30
Film Capacitor Style Type Application Page Polyester Film Capacitors EMI Suppression Film Capacitors Series Impedance Capacitors Polypropylene Film Capacitors PFC Input Capacitors Polyester Polypropylene
Common to almost all eco-friendly lighting.
A series on topics of relevance and advances from the Technical Centre, Deki Electronics Ltd, India February 2012 Common to almost all eco-friendly lighting. RoHS compliant film capacitors from Deki. www.dekielectronics.com
Applications SPC K 100 K33 TR12. Capacitance Tolerance G = ±2% H = ±2.5% J = ±5% K = ±10% F 127 S L 471 K 100 V
SPC Series Encapsulated Double Metallized, Size 2824 6560, 100 630 VDC Overview Film capacitor for surface mounting. Double sided metallized film as electrode. Plain polyphenylene sulfide (PPS) as dielectric.
Applications R46 K I M
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V 0. Applications For worldwide
Medium Power Film Capacitors
The FLA series uses metallized polypropylene dielectric, aluminum can, impregnated with soft PU specially treated to have a very high dielectric strength in operating conditions up to 85 C. The FLA has
Temperature= +40±2 C Capacitance change ±3%
MS - (Expanded range; new lugs) MKP - Switching - igh current - DC-ink - AC Main applications DC-ink, switching capacitor for industrial and motor speed controls, SMPS, solar inverters, power converters
100V 160V 200V 250V 400V
CL12 Polyester Film Capacitors Structures: Polypropylene film, non- inductive, phenolic resin coating Features: Excellent frequency and temperature characteristics, Very small loss even at high frequency.
Capacitance range: mf to 25 mf Rated voltages: 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC
WIMA Snubber MKP Snubber MKP Capacitors for Pulse Applications with ouble-sided Metallized Electrodes, Schoopage Contacts and Internal Series Connection Special Features Pulse duty construction Self-healing
DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents
DATA SHEET Supersedes data of 18th January 2000 File under BCcomponents, BC01 2000 Apr 07 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case,
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 31, 2016 V.14 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification October 27, 16 V.15 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free
Crimped taping. W NOTE: Straight lead not recommended Explanation of Part Number for Odd Size Taping
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
Metallized Polypropylene Film Capacitor DC-Link capacitor
Metallized Polypropylene Film Capacitor DC-Link capacitor APPLICATIONS Industrial and high-end power supplies High performance DC filtering Frequency converters Solar inverters Renewable energies inverters
Configuration. Specification: Capacitance Range. Insulation Resistance. Maximum Pulse Rise Time(V/μsec.): Shown As Following Table.
Metallized Polyester Film s (Radial Dipped) Configuration FEATURES Self healing characteristics. Miniature size, light in weight. High stability of temperature vs. Cap. and tanδ. High density thermosetting
High Security Capacitors with controllable metallized frame layers
Replacement for CKM 501-4 BG series Applications Railway Signal Systems High Reliability Circuits Main Characteristics High Reliability Controllable Metallized frame layers Compliant to standards NF F
film capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.001μF to 10μF Capacitance tolerance ± 10 %, ± 20 % Rated
SWITCH-MODE CERAMIC CAPACITORS
Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512 ( Automotive & Anti-sulfuration ) Page 1 of 7 SR20-25X_V04 Sep.-2011 FEATURE 1. High reliability and stability ±1% 2. Sulfuration resistant 1000ppm
Resin-Coated, Radial-Leaded Solid Tantalum Capacitors
FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*
Thin Film Chip Resistor (ARG Series)
Construction D1 L (ARG Series) Features -Advanced thin film technology -SMD Type designed for automatic insertion -Wide resistance range 1ohm ~ 2.49Mega ohm Applications -Medical Equipment -Testing / Measurement
Metallized Polypropylene Film Capacitor (Plastic Case) AC Application (2 or 4 pins)
The series is a polypropylene metallized film capacitor with plastic casing sealed with epoxy. This capacitor is suitable for use in AC filter circuits, Solar Inverter and Industrial Inverter. FEATURES
WR10X ±1%, ±5% General purpose chip resistors Size 1210
WR10X ±1%, ±5% General purpose chip resistors Size 1210 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR10X Version 02 Jun.-2005 FEATURE 1. High reliability and stability 2. Reduced
Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration )
SR12, SR10, SR08, SR06, SR04, General purpose chip resistors Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration ) *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_SR_V03
UL9 SERIES. Medium Power Film. DC Link Filter Capacitor
DC Link Filter Capacitor UL9 SERIES Medium Power Film The UL9 is a metallized polypropylene film capacitor designed to handle the heavy load of power applications, typical in DC Link applications. The
WR04X ±1%, ±5% General purpose chip resistors Size 0402
WR04X ±1%, ±5% General purpose chip resistors Size 0402 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR04X Version 14 Jul.-2007 FEATURE 1. Small size and light weight 2. High reliability
APPLICATIONS Smart phone, Tablets, Notebook, LCD TV, Power supplies. P (0.081) 1.35 (0.050) 1.50 (0.059) max
FEATURES Conductive polymer electrode Benign failure mode under recommended use conditions Lower 3x reflow 260 C compatible CV range: 0.47-470μF / 2.5-125V 18 case sizes available APPLICATIONS Smart phone,
General Purpose, High Stability and AC Line EMI Suppression MDC Series Dual In-Line, VDC, High Current. Applications
General Purpose, High Stability and AC Line EMI Suppression MDC Series Dual In-Line, 50 630 VDC, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting.
Snubber, High Current DC, and Switching Capacitors
GTC 005 2011 Snubber, High Current DC, and Switching Capacitors Genteq Capacitors 1946 West Cook Road, Fort Wayne, Indiana 46818 USA Phone: (260) 416-5400 Fax: (260) 416-5460 Email: capacitors@regalbeloit.com
Applications GPC K 63 K31 TR12. Capacitance Tolerance K = ±10% M = ±20% Other tolerances on request F 117 S G 471 K 063 V
General Purpose, High Stability and AC Line EMI Suppression GPC Series Encapsulated Double Metallized, Size 2824 6560, 63 1,000 VDC Overview Film capacitor for surface mounting. Double sided metallized
Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G capacitor is a polypropylene metallized film capacitor with a polyester tape wrapping filled with resin, and uses tinned
PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option
WF12H, WF08H, WF06H, WF04H ±0.1% High precision chip resistors Size 1206, 0805, 0603, 0402
WF12H, WF08H, WF06H, WF04H ±0.1% High precision chip resistors Size 1206, 0805, 0603, 0402 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WFxxHB ±0.1% Ver.13 Sep.-2008 FEATURE 1.
Thank you for visiting our new Consumer/Gaming Capacitance Solution page.
Thank you for visiting our new Consumer/Gaming Capacitance Solution page. This site is currently under construction - in the interim you will find the following KEMET product data sheets that may be of
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
MMP - Metal Film MELF
Specifications Per IEC 60115-1 D2 EN140401-803 B L D1 Features SMD enabled structure Excellent solderability termination Products meet RoHS requirements and do not contain substances of very high concern
Metal Alloy Low-Resistance Resistor Specifications
Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18-20-25X(W) Ver.13 Oct.-2010 FEATURE 1. High power
handbook, halfpage lower RLL 116
FEATURES Polarized aluminium electrolytic capacitors, non-solid Radial leads, cylindrical aluminium case with pressure relief, insulated with a blue vinyl sleeve Charge and discharge proof Long useful
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432)
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432) Metal Current Sensing Type *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25N_V14 Jul - 2015
CAPACITOR CATALOG SPE GROUP. Capacitor & Diode ISO Professional Manufacturer. To Support the success of enterprise To Support a successful enterprise
CAPACITOR CATALOG SPE GROUP Capacitor & Diode ISO Professional Manufacturer To Support the success of enterprise To Support a successful enterprise SUNTAP ELECTRONICS GROUP CO.,LTD. Tel: +86 020 84122024
MTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a
Thin Film Anti-Sulfurated Chip Resistor (TAS Series)
(TAS Series) Features - Special materials, design, and processing for high sulfur applications - Tolerances as low as 0.05% and s as low as 10 ppm. - Test proven immunity to humidity, moisture, and sulfur
WK25S WK20S WK10S WK12S WK08S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805
WK25S WK20S WK10S WK12S WK08S ±5%, ±10%, ±20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WKxxS_V02
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
WT04X ±5%, Convex Type 10p8R Chip resistors network Size 1206
WT04X ±5%, Convex Type 10p8R Chip resistors network Size 1206 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WT04X Ver.13 Sep.-2008 FEATURE 1. Small size and light weight 2. Reduced
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
MTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10H_V01 Jan.2010 FEATURE 1. High reliability and stability
WR02X ±5%, ±1% General purpose chip resistors Size 0201
WR02X ±5%, ±1% General purpose chip resistors Size 0201 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WR02X Version 03 Jul.-2004 FEATURE 1. Small size and light weight 2. High reliability
Snap-in Type Aluminium Electrolytic Capacitors
Endurance:105 3000 hours Recommended Applications : Smoothing circuit, TV/Monitor,Adapter, SMPS Corresponding product to RoHS Long Life LG SPECIFICATIONS Item Category Temperature Range Range Rated acitance
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size
High Power Low Ohm Chip Resistors. Size W, W, /2W
WW25P, WW20P, WW12P ±1%, ±5% 47mΩ~976mΩ High Power Low Ohm Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25P-20P-12P_V08
MKT (Box) PCMT 468. MKP (Box) PCMP 389. High Pulse High Current Metallized KP/MMKP (Dipped) BUP. MPPS (Dipped) PCMS 395
Film Capacitor Style Type Application Page PCMT 365/366/367 17 General Purpose capacitor Metallized Polyester MKT (Dipped) PCMT 368 Blocking Coupling 18 PCMT 369 Bypass Energy reservoir 19 MKT (Box) PCMT
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) ELECTRICAL SPECIFICATIONS NON-MAGNETIC C0G (NP0) GENERAL SPECIFICATION Note Electrical characteristics at
Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES
CASE DIMENSIONS: millimeters (inches) Code H, K, L, O, S, T, X CASE 156 J XXXXX 156 = 15µF ID Code HO TO ORDER TCN L 157 FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode
WA04T ±5%, ±1% Concave Type General purpose chip resistors array
WA04T ±5%, ±1% Concave Type General purpose chip resistors array Size 0402x4 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WA04T_Concave_V10 Oct.2010 FEATURE 1. Small
WW12W ±1%, ±5% Size W. Thick Film High Power Low Ohm Chip Resistors. Approval sheet
±1%, ±5% Thick Film High Power Low Ohm Chip Resistors Size 1206 1W *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC 1W TC200_V01 DEC - 2015 FEATURE 1. High power rating
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering) FEATURES Manufactured with non-magnetic materials Safety screened for magnetic properties C0G (NP0)
Contents CORNELL DUBILIER
Contents Products Listed by Type Designation........................................................ Chip and SMT Selector Guide................................................................... 1.001
Dimensions mm. IMax Multiplier 1kHz 10kHz. Ambient Temperature. Fixing symbol code
UPGRADE! MLC Cylindrically-Shaped Metallized Polypropylene Fim Capacitos Features Cylindrically-shaped capacitor with big capacitance for wind & solar power inverters, other inverters, chopper control
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±