CMK Metallized polycarbonate CECC approval, detail specification According to CECC 30500, IEC 384-6
|
|
|
- Sandra Norton
- 5 years ago
- Views:
Transcription
1 Metallized polycarbonate CECC approval, detail specification According to CECC 30500, IEC TYPICAL APPLICATIONS Automotive and other applications in high ambient temperatures. Stable filters, oscillators and timing circuits. CONSTRUCTION Polycarbonate film capacitor with vacuumevaporated aluminum electrodes. Radial leads of tinned wire are electrically welded to the contact metal layer on the ends of the capacitor winding. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0. Rated voltage U R, VDC Rated voltage U R, VAC Capaci, µf TECHNICAL DATA CMK CMK p d std I max I b 5.0 ± ± ± ± ± ± ± ± ± ± ± ± ± ± 0.7 Capaci tolerance Temperature range Climatic category Test voltage Reliability Maximum pulse steepness: Temperature coefficient Self-induc ± 20 %, ±10 %, ± 5 %, ± 2.5 % C Above +85 C DC and AC voltage derating is 1.25%/ C. IEC 68-1, 55/125/56 DIN 40040, FKD C Average relative humidity 80 % RH = 100% for 30 days per year. RH = 90% for further days limited by average value per year. 1.6 x U R VDC for 2 s Operational life > h. Failure rate < 6 FIT, T = +40 C, U = 0.5 x U R. Failure criteria according to DIN according to article table. For peak to peak voltages lower than rated voltage (U PP < U R ), the specified can be multiplied by the factor U R /U PP. 0 (±100) ppm/ C (at 1 khz) Approximately 6 nh/cm for the total length of capacitor winding and the leads. 46
2 TECHNICAL DATA Dissipation factor tan Maximum values at +23 C C 0.1 µf 0.1 µf < C 1.0 µf C > 1.0 µf CMK5 1 khz 0.3% 0.3% 10 khz 0.5% 0.5% 100 khz 0.8% 1.0% CMK khz 0.3% 0.3% 0.3% 10 khz 0.5% 0.5% 100 khz 1.0% Insulation resis Minimum value between terminals Measured at +20 C, according to IEC C 0.33 µf C > 0.33 µf U R 100V MΩ 5000 s U R > 100V MΩ s TYPICAL DATA Capaci vs. temperature (at 1 khz) Capaci vs. frequency (at +23 C) Insulation resis vs. temperature Dissipation factor vs. temperature Dissipation factor vs. frequency (at +23 C) Resonance frequencies CMK 5 47
3 RATED AC VOLTAGE VS. FREQUENCY CMK5 63/40 CMK5 100/63 CMK /40 CMK /63 CMK /160 CMK /200 ENVIRONMENTAL TEST DATA MARKING Damp heat test Test conditions: Test criteria: Endurance test Test conditions: Capaci drift Test criteria: T = +40 C, RH = 93%, t = 56 days. C/C ±3%, tan (1kHz), tan (10kHz), IR after test 0.5 x IR min. T = +125 C, U = 1.25 x (0.5 x U R ), t = 2000 h. C/C ±3%, tan (1kHz) tan (10kHz) IR after test 0.5 x IR min. Max. 2% after a 2 year storage period at a temperature of C and a relative humidity of %. Capaci Tolerance code Rated voltage Capacitor family code CMK Manufacturing date code ORDERING INFORMATION See article table and page 20. The standard quantity/reel is for 360 mm reel. If 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity. 48
4 63 VDC/40 VAC LEAD SPACING 5 MM CMK5 102K63L4 BULK CMK5 122K63L4 BULK CMK5 152K63L4 BULK CMK5 182K63L4 BULK CMK5 222K63L4 BULK CMK5 272K63L4 BULK CMK5 332K63L4 BULK CMK5 392K63L4 BULK CMK5 472K63L4 BULK CMK5 562K63L4 BULK CMK5 682K63L4 BULK CMK5 822K63L4 BULK CMK5 103K63L4 BULK CMK5 123K63L4 BULK CMK5 153K63L4 BULK CMK5 183K63L4 BULK CMK5 223K63L4 BULK CMK5 273K63L4 BULK CMK5 333K63L4 BULK CMK5 393K63L4 BULK CMK5 473K63L4 BULK CMK5 563K63L4 BULK CMK5 683K63L4 BULK CMK5 823K63L4 BULK CMK5 104K63L4 BULK CMK5 124K63L4 BULK CMK5 154K63L4 BULK CMK5 184K63L4 BULK CMK5 224K63L4 BULK CMK5 274K63L4 BULK CMK5 334K63L4 BULK CMK5 394K63L4 BULK CMK5 474K63L4 BULK CMK5 564K63L4 BULK CMK5 684K63L4 BULK CMK7,5 102K63L4 BULK CMK7,5 122K63L4 BULK CMK7,5 152K63L4 BULK CMK7,5 182K63L4 BULK CMK7,5 222K63L4 BULK CMK7,5 272K63L4 BULK CMK7,5 332K63L4 BULK CMK7,5 392K63L4 BULK CMK7,5 472K63L4 BULK CMK7,5 562K63L4 BULK CMK7,5 682K63L4 BULK CMK7,5 822K63L4 BULK CMK7,5 103K63L4 BULK CMK7,5 123K63L4 BULK CMK7,5 153K63L4 BULK CMK7,5 183K63L4 BULK CMK7,5 223K63L4 BULK CMK7,5 273K63L4 BULK CMK7,5 333K63L4 BULK CMK7,5 393K63L4 BULK CMK7,5 563K63L4 BULK CMK7,5 683K63L4 BULK CMK7,5 823K63L4 BULK 49
5 63 VDC/40 VAC CMK7,5 104K63L4 BULK CMK7,5 124K63L4 BULK CMK7,5 154K63L4 BULK CMK7,5 184K63L4 BULK CMK7,5 224K63L4 BULK CMK7,5 274K63L4 BULK CMK7,5 334K63L4 BULK CMK7,5 394K63L4 BULK CMK7,5 474K63L4 BULK CMK7,5 564K63L4 BULK CMK7,5 684K63L4 BULK LEAD SPACING 10 MM CMK10 272K63L4 BULK CMK10 332K63L4 BULK CMK10 392K63L4 BULK CMK10 472K63L4 BULK CMK10 562K63L4 BULK CMK10 682K63L4 BULK CMK10 822K63L4 BULK CMK10 103K63L4 BULK CMK10 123K63L4 BULK CMK10 153K63L4 BULK CMK10 183K63L4 BULK CMK10 223K63L4 BULK CMK10 273K63L4 BULK CMK10 333K63L4 BULK CMK10 393K63L4 BULK CMK10 473K63L4 BULK CMK10 563K63L4 BULK CMK10 683K63L4 BULK CMK10 823K63L4 BULK CMK10 104K63L4 BULK CMK10 124K63L4 BULK CMK10 154K63L4 BULK CMK10 184K63L4 BULK CMK10 224K63L4 BULK CMK10 274K63L4 BULK CMK10 334K63L4 BULK CMK10 394K63L4 BULK CMK10 474K63L4 BULK CMK10 564K63L4 BULK CMK10 684K63L4 BULK LEAD SPACING 15 MM CMK15 684K63L4 BULK CMK15 824K63L4 BULK CMK15 105K63L4 BULK CMK15 125K63L4 BULK CMK15 155K63L4 BULK CMK15 185K63L4 BULK CMK15 225K63L4 BULK CMK15 275K63L4 BULK CMK15 335K63L4 BULK 50
6 63 VDC/40 VAC LEAD SPACING 22.5 MM CMK22,5 275K63L4 TRAY CMK22,5 335K63L4 TRAY CMK22,5 395K63L4 TRAY CMK22,5 475K63L4 TRAY CMK22,5 565K63L4 TRAY CMK22,5 685K63L4 TRAY CMK22,5 825K63L4 TRAY CMK22,5 106K63L4 TRAY LEAD SPACING 27.5 MM CMK27,5 106K63L4 TRAY CMK27,5 126K63L4 TRAY CMK27,5 156K63L4 TRAY 100 VDC/63 VAC LEAD SPACING 5 MM CMK5 102K100L4 BULK CMK5 122K100L4 BULK CMK5 152K100L4 BULK CMK5 182K100L4 BULK CMK5 222K100L4 BULK CMK5 272K100L4 BULK CMK5 332K100L4 BULK CMK5 392K100L4 BULK CMK5 472K100L4 BULK CMK5 562K100L4 BULK CMK5 682K100L4 BULK CMK5 822K100L4 BULK CMK5 103K100L4 BULK CMK5 123K100L4 BULK CMK5 153K100L4 BULK CMK5 183K100L4 BULK CMK5 223K100L4 BULK CMK5 273K100L4 BULK CMK5 333K100L4 BULK CMK5 393K100L4 BULK CMK5 473K100L4 BULK CMK5 563K100L4 BULK CMK5 683K100L4 BULK CMK5 823K100L4 BULK CMK5 104K100L4 BULK CMK5 124K100L4 BULK CMK5 154K100L4 BULK CMK5 184K100L4 BULK CMK5 224K100L4 BULK CMK5 274K100L4 BULK CMK5 334K100L4 BULK CMK7,5 102K100L4 BULK CMK7,5 122K100L4 BULK CMK7,5 152K100L4 BULK CMK7,5 182K100L4 BULK CMK7,5 222K100L4 BULK CMK7,5 272K100L4 BULK 51
7 100 VDC/63 VAC CMK7,5 332K100L4 BULK CMK7,5 392K100L4 BULK CMK7,5 472K100L4 BULK CMK7,5 562K100L4 BULK CMK7,5 682K100L4 BULK CMK7,5 822K100L4 BULK CMK7,5 103K100L4 BULK CMK7,5 123K100L4 BULK CMK7,5 153K100L4 BULK CMK7,5 183K100L4 BULK CMK7,5 223K100L4 BULK CMK7,5 273K100L4 BULK CMK7,5 333K100L4 BULK CMK7,5 393K100L4 BULK CMK7,5 473K100L4 BULK CMK7,5 563K100L4 BULK CMK7,5 683K100L4 BULK CMK7,5 823K100L4 BULK CMK7,5 104K100L4 BULK CMK7,5 124K100L4 BULK CMK7,5 154K100L4 BULK CMK7,5 184K100L4 BULK CMK7,5 224K100L4 BULK CMK7,5 274K100L4 BULK CMK7,5 334K100L4 BULK LEAD SPACING 10 MM CMK10 272K100L4 BULK CMK10 332K100L4 BULK CMK10 392K100L4 BULK CMK10 472K100L4 BULK CMK10 562K100L4 BULK CMK10 682K100L4 BULK CMK10 822K100L4 BULK CMK10 103K100L4 BULK CMK10 123K100L4 BULK CMK10 153K100L4 BULK CMK10 183K100L4 BULK CMK10 223K100L4 BULK CMK10 273K100L4 BULK CMK10 333K100L4 BULK CMK10 393K100L4 BULK CMK10 473K100L4 BULK CMK10 563K100L4 BULK CMK10 683K100L4 BULK CMK10 823K100L4 BULK CMK10 104K100L4 BULK CMK10 124K100L4 BULK CMK10 154K100L4 BULK CMK10 184K100L4 BULK CMK10 224K100L4 BULK CMK10 274K100L4 BULK CMK10 334K100L4 BULK LEAD SPACING 15 MM CMK15 274K100L4 BULK CMK15 334K100L4 BULK CMK15 394K100L4 BULK CMK15 474K100L4 BULK 52
8 100 VDC/63 VAC LEAD SPACING 15 MM CMK15 564K100L4 BULK CMK15 684K100L4 BULK CMK15 824K100L4 BULK CMK15 105K100L4 BULK CMK15 125K100L4 BULK CMK15 155K100L4 BULK LEAD SPACING 22.5 MM CMK22,5 155K100L4 TRAY CMK22,5 185K100L4 TRAY CMK22,5 225K100L4 TRAY CMK22,5 275K100L4 TRAY CMK22,5 335K100L4 TRAY CMK22,5 395K100L4 TRAY LEAD SPACING 27.5 MM CMK27,5 475K100L4 TRAY CMK27,5 565K100L4 TRAY CMK27,5 685K100L4 TRAY 250 VDC/160 VAC LEAD SPACING 5 MM CMK5 102K250L4 BULK CMK5 122K250L4 BULK CMK5 152K250L4 BULK CMK5 182K250L4 BULK CMK5 222K250L4 BULK CMK5 272K250L4 BULK CMK5 332K250L4 BULK CMK5 392K250L4 BULK CMK5 472K250L4 BULK CMK5 562K250L4 BULK CMK5 682K250L4 BULK CMK5 822K250L4 BULK CMK5 103K250L4 BULK CMK5 123K250L4 BULK CMK5 153K250L4 BULK CMK5 183K250L4 BULK CMK5 223K250L4 BULK CMK5 273K250L4 BULK CMK5 333K250L4 BULK CMK5 393K250L4 BULK CMK5 473K250L4 BULK CMK5 563K250L4 BULK CMK5 683K250L4 BULK CMK5 823K250L4 BULK CMK5 104K250L4 BULK CMK7,5 102K250L4 BULK CMK7,5 122K250L4 BULK CMK7,5 152K250L4 BULK CMK7,5 182K250L4 BULK 53
9 250 VDC/160 VAC CMK7,5 222K250L4 BULK CMK7,5 272K250L4 BULK CMK7,5 332K250L4 BULK CMK7,5 392K250L4 BULK CMK7,5 472K250L4 BULK CMK7,5 562K250L4 BULK CMK7,5 682K250L4 BULK CMK7,5 822K250L4 BULK CMK7,5 103K250L4 BULK CMK7,5 123K250L4 BULK CMK7,5 153K250L4 BULK CMK7,5 183K250L4 BULK CMK7,5 223K250L4 BULK CMK7,5 273K250L4 BULK CMK7,5 333K250L4 BULK CMK7,5 393K250L4 BULK CMK7,5 473K250L4 BULK CMK7,5 563K250L4 BULK CMK7,5 683K250L4 BULK CMK7,5 823K250L4 BULK CMK7,5 104K250L4 BULK LEAD SPACING 10 MM CMK10 222K250L4 BULK CMK10 272K250L4 BULK CMK10 332K250L4 BULK CMK10 392K250L4 BULK CMK10 472K250L4 BULK CMK10 562K250L4 BULK CMK10 682K250L4 BULK CMK10 822K250L4 BULK CMK10 103K250L4 BULK CMK10 123K250L4 BULK CMK10 153K250L4 BULK CMK10 183K250L4 BULK CMK10 223K250L4 BULK CMK10 273K250L4 BULK CMK10 333K250L4 BULK CMK10 393K250L4 BULK CMK10 473K250L4 BULK CMK10 563K250L4 BULK CMK10 683K250L4 BULK CMK10 823K250L4 BULK CMK10 104K250L4 BULK LEAD SPACING 15 MM CMK15 104K250L4 BULK CMK15 124K250L4 BULK CMK15 154K250L4 BULK CMK15 184K250L4 BULK CMK15 224K250L4 BULK CMK15 274K250L4 BULK CMK15 334K250L4 BULK CMK15 394K250L4 BULK 54
10 250 VDC/160 VAC LEAD SPACING 22.5 MM CMK22,5 474K250L4 TRAY CMK22,5 564K250L4 TRAY CMK22,5 684K250L4 TRAY CMK22,5 824K250L4 TRAY CMK22,5 105K250L4 TRAY CMK22,5 125K250L4 TRAY CMK22,5 155K250L4 TRAY CMK22,5 185K250L4 TRAY CMK22,5 225K250L4 TRAY LEAD SPACING 27.5 MM CMK27,5 155K250L4 TRAY CMK27,5 185K250L4 TRAY CMK27,5 225K250L4 TRAY CMK27,5 275K250L4 TRAY CMK27,5 335K250L4 TRAY 400 VDC/200 VAC CMK7,5 102K400L4 BULK CMK7,5 122K400L4 BULK CMK7,5 152K400L4 BULK CMK7,5 182K400L4 BULK CMK7,5 222K400L4 BULK CMK7,5 272K400L4 BULK CMK7,5 332K400L4 BULK CMK7,5 392K400L4 BULK CMK7,5 472K400L4 BULK CMK7,5 562K400L4 BULK CMK7,5 682K400L4 BULK CMK7,5 822K400L4 BULK CMK7,5 103K400L4 BULK CMK7,5 123K400L4 BULK CMK7,5 153K400L4 BULK CMK7,5 183K400L4 BULK CMK7,5 223K400L4 BULK CMK7,5 273K400L4 BULK CMK7,5 333K400L4 BULK CMK7,5 393K400L4 BULK CMK7,5 473K400L4 BULK CMK7,5 563K400L4 BULK LEAD SPACING 10 MM CMK10 222K400L4 BULK CMK10 272K400L4 BULK CMK10 332K400L4 BULK CMK10 392K400L4 BULK CMK10 472K400L4 BULK CMK10 562K400L4 BULK CMK10 682K400L4 BULK CMK10 822K400L4 BULK CMK10 103K400L4 BULK CMK10 123K400L4 BULK CMK10 153K400L4 BULK 55
11 400 VDC/200 VAC LEAD SPACING 10 MM CMK10 183K400L4 BULK CMK10 223K400L4 BULK CMK10 273K400L4 BULK CMK10 333K400L4 BULK CMK10 393K400L4 BULK LEAD SPACING 15 MM CMK15 473K400L4 BULK CMK15 563K400L4 BULK CMK15 683K400L4 BULK CMK15 823K400L4 BULK CMK15 104K400L4 BULK CMK15 124K400L4 BULK CMK15 154K400L4 BULK CMK15 184K400L4 BULK LEAD SPACING 22.5 MM CMK22,5 154K400L4 TRAY CMK22,5 184K400L4 TRAY CMK22,5 224K400L4 TRAY CMK22,5 274K400L4 TRAY CMK22,5 334K400L4 TRAY CMK22,5 394K400L4 TRAY CMK22,5 474K400L4 TRAY CMK22,5 564K400L4 TRAY LEAD SPACING 27.5 MM CMK27,5 474K400L4 TRAY CMK27,5 564K400L4 TRAY CMK27,5 684K400L4 TRAY CMK27,5 824K400L4 TRAY CMK27,5 105K400L4 TRAY 56
According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency
PHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS CONSTRUCTION L B Pulse operation in SMPS, TV, monitor, electrical ballast and
Polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
R82. p = 5mm. MKT Series R 8 2 C -
Loose All dimensions are in mm. Taped R82 Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. p = 5mm B
Applications F 611 J F 104 M 050 C. First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F611 & F612 Series Metallized Polyester Film, 5 37.5 mm Lead Spacing, 50 1,000 VDC Overview The F611 and F612 Series is constructed of metallized winded
Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor
Applications SMR K 50 J01 L4 BULK. Capacitance Tolerance H = ±2.5% J = ±5% K = ±10% M = ±20% F 211 J F 104 K 050 C
Metallized Polyphenylene Sulfide, Stable +150 C High Temperature Capacitor Overview The SMR Series is a metallized polyphenylene sulfide film capacitor with vacuum-evaporated aluminum electrodes. Radial
Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Overview The R76 Series is constructed of polypropylene
General Purpose, Pulse and DC Transient Suppression SMR, Metallized Polyphenylene Sulfide Film, +150 C, mm Lead Spacing, VDC
General Purpose, Pulse and DC Transient Suppression SMR, Metallized Polyphenylene Sulfide Film, +150 C, 5.0 27.5 mm Lead Spacing, 50 400 VDC Overview The SMR Series is a metallized polyphenylene sulfide
Film Capacitors. Metallized Polyester Film Capacitors (MKT) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32591... B32594 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto
MSB Metallized polyester film capacitor MKT - High performance
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor run applications. Low power switching applications. Low pulse operation
Film Capacitors. Metallized Polyester Film Capacitors (MKT-S) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT-S) Series/Type: B32537 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 Series is constructed of metallized polypropylene
Metallized Polypropylene Film Capacitors (MKP)
Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: July 2015 B32656S... B32658S EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures
High Security Capacitors with controllable metallized frame layers
Replacement for CKM 501-4 BG series Applications Railway Signal Systems High Reliability Circuits Main Characteristics High Reliability Controllable Metallized frame layers Compliant to standards NF F
MTB. MKT box with radial terminals small size general purpose. Ed. 04 Rev Dissipation factor (DF), max. tgδ x10-4, measured at 25 ±5 C
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low pulse operation Dielectric Polyester Electrodes Vacuum
Applications R71 M F 2100 AA 00 J
Polypropylene Pulse/High Frequency Capacitors R71 Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Overview The R71 is constructed of metallized polypropylene film with radial leads
Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
Polypropylene Pulse/High Frequency Capacitors R75 Series Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R75 Series Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Overview The R75 Series is constructed of metallized
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, VDC.
General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, 50 630 VDC Overview Dual in-line (DIL) metallized polyester (PET) film capacitor. Encapsulation
THZ NEW - In Progress
Main applications AC power applications, input-output AC filtering, harsh environment applications Dielectric Polypropylene Electrodes Vacuum deposited metal layers Coating Solvent resistant plastic case
Common to almost all eco-friendly lighting.
A series on topics of relevance and advances from the Technical Centre, Deki Electronics Ltd, India February 2012 Common to almost all eco-friendly lighting. RoHS compliant film capacitors from Deki. www.dekielectronics.com
Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor
PPS. MKP axial terminals snubber medium-high pulse applications high current high frequency switching. Ed. 04 Rev
Main applications Snubber, energy conversion and control in power semiconductor circuits, industrial and motor speed controls, SMPS, induction heaters, high voltage, high current and medium-high pulse
1.0 Rated Values and Operational Data
Applications Protection and Commutation Power Electronics Impulsional devices with intensive / High Current Switching Power Supplies Main Characteristics Dry film-foil technology Nominal Voltage: 630 VDC
MAB - (Updated approval references)
Main applications Motor run capacitor, general purpose AC applications, medium-low power switching capacitor for industrial and motor speed controls, electronic ballasts and SMPS Dielectric Polypropylene
Energy sector DC LINK CAPACITORS AND SNUBBERS
Energy sector DC LINK CAPACITORS AND SNUBBERS DC link APPLICATIONS Hybrid vehicles Wind plants Solar power plants Electric energy generation from sea waves Medical equipment Industrial equipment Car electronics
1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents
DATA SHEET Supersedes data of 18th January 2000 File under BCcomponents, BC01 2000 Apr 07 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case,
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
Product Specification March 7, 2017 V.16 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 100 nf RoHS compliant & Halogen Free Product specification
Applications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T
Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications
Capacitance range: mf to 25 mf Rated voltages: 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC
WIMA Snubber MKP Snubber MKP Capacitors for Pulse Applications with ouble-sided Metallized Electrodes, Schoopage Contacts and Internal Series Connection Special Features Pulse duty construction Self-healing
Failure quota 300/10 9 component hours. Warning: this specification must be completed with the data given in the General technical information chapter
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512 ( Automotive & Anti-sulfuration ) Page 1 of 7 SR20-25X_V04 Sep.-2011 FEATURE 1. High reliability and stability ±1% 2. Sulfuration resistant 1000ppm
Configuration. Specification: Capacitance Range. Insulation Resistance. Maximum Pulse Rise Time(V/μsec.): Shown As Following Table.
Metallized Polyester Film s (Radial Dipped) Configuration FEATURES Self healing characteristics. Miniature size, light in weight. High stability of temperature vs. Cap. and tanδ. High density thermosetting
WW12W ±1%, ±5% Size W. Thick Film High Power Low Ohm Chip Resistors. Approval sheet
±1%, ±5% Thick Film High Power Low Ohm Chip Resistors Size 1206 1W *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC 1W TC200_V01 DEC - 2015 FEATURE 1. High power rating
PSB / RSB - (Expanded range)
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, resonant circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and
Thin Film Chip Resistor (ARG Series)
Construction D1 L (ARG Series) Features -Advanced thin film technology -SMD Type designed for automatic insertion -Wide resistance range 1ohm ~ 2.49Mega ohm Applications -Medical Equipment -Testing / Measurement
Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration )
SR12, SR10, SR08, SR06, SR04, General purpose chip resistors Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration ) *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_SR_V03
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice. 1. Features Ultra Low & high ripple
Multilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on
Applications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T
MDS, Dual In-Line Low Profile, 50 630, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor is encapsulated in a self-extinguishing material, meeting the requirements of UL
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 31, 2016 V.14 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
Applications SPC K 100 K33 TR12. Capacitance Tolerance G = ±2% H = ±2.5% J = ±5% K = ±10% F 127 S L 471 K 100 V
SPC Series Encapsulated Double Metallized, Size 2824 6560, 100 630 VDC Overview Film capacitor for surface mounting. Double sided metallized film as electrode. Plain polyphenylene sulfide (PPS) as dielectric.
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification October 27, 16 V.15 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free
WR10X ±1%, ±5% General purpose chip resistors Size 1210
WR10X ±1%, ±5% General purpose chip resistors Size 1210 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR10X Version 02 Jun.-2005 FEATURE 1. High reliability and stability 2. Reduced
MHBS (MHB version S) NEW in progress
Main applications Switching capacitor for industrial and motor speed controls, DClink, SMPS, induction heaters, suitable for AC applications Main characteristics High voltage and high capacitance in small
Metallized Polypropylene Film Capacitor DC-Link capacitor
Metallized Polypropylene Film Capacitor DC-Link capacitor APPLICATIONS Industrial and high-end power supplies High performance DC filtering Frequency converters Solar inverters Renewable energies inverters
WR04X ±1%, ±5% General purpose chip resistors Size 0402
WR04X ±1%, ±5% General purpose chip resistors Size 0402 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR04X Version 14 Jul.-2007 FEATURE 1. Small size and light weight 2. High reliability
CAPACITOR CATALOG SPE GROUP. Capacitor & Diode ISO Professional Manufacturer. To Support the success of enterprise To Support a successful enterprise
CAPACITOR CATALOG SPE GROUP Capacitor & Diode ISO Professional Manufacturer To Support the success of enterprise To Support a successful enterprise SUNTAP ELECTRONICS GROUP CO.,LTD. Tel: +86 020 84122024
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size
handbook, halfpage lower RLL 116
FEATURES Polarized aluminium electrolytic capacitors, non-solid Radial leads, cylindrical aluminium case with pressure relief, insulated with a blue vinyl sleeve Charge and discharge proof Long useful
Thin Film Anti-Sulfurated Chip Resistor (TAS Series)
(TAS Series) Features - Special materials, design, and processing for high sulfur applications - Tolerances as low as 0.05% and s as low as 10 ppm. - Test proven immunity to humidity, moisture, and sulfur
MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array
MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) Page 1 of 8 MA04/ 06_V03 Apr.2010 FEATURE 1. High reliability and stability
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
MPPB Series. Metallized Polypropylene Film Capacitor Box type. Metallized Polypropylene Film Capacitor - Box type Features. Typical Applications
Metallized Polypropylene Film Capacitor - Box type Features Metallized polypropylene structure Low loss at high frequency Small inherent temperature rise Plastic case (UL94 V-0), Epoxy resin sealing RoHS
WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1206, 0805, 0603, ( Automotive )
WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors Size 1206, 0805, 0603, 0402 ( Automotive ) Page 1 of 9 WR_J(AUTO)_ V03 Sep.2010 FEATURE 1. Automotive grade AEC Q-200 compliant 2. 100% CCD
SPECIFICATION SHEET. ±1%, ±5%, Convex Type General purpose chip resistors array
SPECIFICATION SHEET CNA24, CNA34 ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) All data in this sheet are subject to change, modify
handbook, halfpage 059 PLL-SI 200 V, 250 V, 400 V, 450 V Category temperature range 25 to +105 C Endurance test at 105 C
FEATURES Polarized aluminium electrolytic capacitors, non-solid arge types, very small dimensions, cylindrical aluminium case, insulated with a blue sleeve Pressure relief on the top of the aluminium case
Resin-Coated, Radial-Leaded Solid Tantalum Capacitors
FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*
WR10, WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1210, 1206, 0805, 0603, 0402
WR10, WR12, WR08, WR06, WR04, General purpose chip resistors Size 1210, 1206, 0805, 0603, 0402 ( Automotive & Anti-sulfuration ) *Contents in this sheet are subject to change without prior notice. Page
WW25W, WW20W, WW10W, WW12W, WW08W, WW06W
WW25W, WW20W, WW10W, WW12W, WW08W, WW06W ±1%, ±5% Thick Film Power Low Ohm Chip Resistors RoHS Exemption free and Lead free Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to
film capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.001μF to 10μF Capacitance tolerance ± 10 %, ± 20 % Rated
AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type
www.vishay.com AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES Low loss dielectric Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
Applications. Capacitance Code Version. The last two digits represent significant figures. The first digit indicates the total number digits.
Axial Aluminum Electrolytic Capacitors PEG124, +105 C and +125 C Overview Applications KEMET's PEG124 is an electrolytic capacitor with very longlife and outstanding electrical performance. The device
WR12X / WR08X / WR06X ±1%, ±5% General purpose chip resistors Size 1206 / 0805 / 0603
WR12X / WR08X / WR06X ±1%, ±5% General purpose chip resistors Size 1206 / 0805 / 0603 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WR12X / WR08X / WR06X Version 17 Jul.-2004 FEATURE
1 8 WK L_V_AUTO_V01 FEB
WK12L, WK20L, WK25L 1%, 5% Thick Film Power Chip Resistor Wide Termination RoHS compliant and Halogen free Size 0612, 1020, 1225 Automotive AEC Q200 Compliant ASTM B-809-95 Compliant *Contents in this
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
WR18, WR20, WR25 ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18, WR20, WR25 ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18, WR20, WR25 Version 3 Oct.-2004 FEATURE 1. High power rating
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18-20-25X(W) Ver.13 Oct.-2010 FEATURE 1. High power
MMP - Metal Film MELF
Specifications Per IEC 60115-1 D2 EN140401-803 B L D1 Features SMD enabled structure Excellent solderability termination Products meet RoHS requirements and do not contain substances of very high concern
TMJ Tantalum SMD S1gma TM Series Capacitors
The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely
1 7 ASC_WF06A_V01 NOV
WF06A 1 ~ 1Mohm ±5%, ±1% High Power Chip Resistors Size 0603 1/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF06A_V01 NOV - 2015 FEATURE 1. Small size and light
WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive)
WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive) *Contents in this sheet are subject to change without prior notice. Page
Crimped taping. W NOTE: Straight lead not recommended Explanation of Part Number for Odd Size Taping
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
NTC Thermistor:TTC05 Series
Features 1. RoHS compliant 2. Halogen-Free (HF) series are available 3. Body size: Ф5mm 4. Radial lead resin coated 5. Operating temperature range: -30 ~+125 6. Wide resistance range 7. Cost effective
WA04T ±5%, ±1% Concave Type General purpose chip resistors array
WA04T ±5%, ±1% Concave Type General purpose chip resistors array Size 0402x4 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WA04T_Concave_V10 Oct.2010 FEATURE 1. Small
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432)
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432) Metal Current Sensing Type *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25N_V14 Jul - 2015
PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option
Automotive and Anti-Sulfuration Chip Resistor 0603
The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the
varistor plus catalog
varistor plus catalog Single Layer Varistor Technology Surface Mount & Leaded Products SEI electronics inc. P.O.Box 58789 Raleigh,NC 27658-8789 Tel. 1-888-sei-sei-sei Fax. 919-850-9504 www.seielect.com
Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G capacitor is a polypropylene metallized film capacitor with a polyester tape wrapping filled with resin, and uses tinned
Metal Alloy Low-Resistance Resistor Specifications
Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following
Metal Oxide Varistor:TVR Series
Features. Body size: Ф5 ~ Ф20mm 2. Wide operating voltage range:vac ~ 00Vac 3. Operating temperature range:-40 ~ +85 C 4. Agency recognition: UL 449 3 rd /UL 44/cUL/VDE /CSA/CQC 5. TVR48~42 and TVR208~202
Temperature= +40±2 C Capacitance change ±3%
MS - (Expanded range; new lugs) MKP - Switching - igh current - DC-ink - AC Main applications DC-ink, switching capacitor for industrial and motor speed controls, SMPS, solar inverters, power converters
WK25S WK20S WK10S WK12S WK08S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805
WK25S WK20S WK10S WK12S WK08S ±5%, ±10%, ±20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WKxxS_V02
Applications R46 K I M
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V 0. Applications For worldwide
FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications
Low - Automotive Product Range FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.22-680μF / 6.3-50V 5 case sizes available Power supply applications APPLICATIONS Power Supply
WR02X ±5%, ±1% General purpose chip resistors Size 0201
WR02X ±5%, ±1% General purpose chip resistors Size 0201 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WR02X Version 03 Jul.-2004 FEATURE 1. Small size and light weight 2. High reliability
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10H_V01 Jan.2010 FEATURE 1. High reliability and stability
WF12H, WF08H, WF06H, WF04H ±0.1% High precision chip resistors Size 1206, 0805, 0603, 0402
WF12H, WF08H, WF06H, WF04H ±0.1% High precision chip resistors Size 1206, 0805, 0603, 0402 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WFxxHB ±0.1% Ver.13 Sep.-2008 FEATURE 1.
Applications F5A H C 4100 DQ A 6 K. Lead and Packaging Code See Ordering Options Table. Capacitance Code (pf)
F5A Series Metallized Polyester Film with Integrated Ceramic Varistor, 18 63 VDC Overview The F5A Series is a metallized polyester (MKT) film capacitor with integrated ceramic varistor encapsulated in
High Power Low Ohm Chip Resistors. Size W, W, /2W
WW25P, WW20P, WW12P ±1%, ±5% 47mΩ~976mΩ High Power Low Ohm Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25P-20P-12P_V08
WF12SR360JTL. Size Surge 5% chip resistors. Customer : Approval No : Issue Date : Customer Approval :
SPECIFICATION OF SURGE 5% CHIP RESISTOR Ver: 1 Page: 1 of 7 ROHS compliance WF12SR360JTL Surge 5% chip resistors Size 1206 Customer : Approval No : Issue Date : Customer Approval : SPECIFICATION OF SURGE
Thick Film General purpose chip resistors
WR02X(W) ±5%, ±1% Thick Film General purpose chip resistors Size 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WR02X_V18 MAY - 2016 FEATURE 1. Small size and
WF06P 5% High power chip resistors Size 0603, 1/8watt
SPECIFICATION OF HIGH POWER CHIP RESISTOR Ver: 1 Page: 1 of 7 ROHS compliance WF06P 5% High power chip resistors Size 0603, 1/8watt Customer : Approval No : Issue Date : Customer Approval : SPECIFICATION
WW25X ±1%, ±5% Low ohmic power chip resistors Size 2512
WW25X ±1%, ±5% Low ohmic power chip resistors Size 2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WW25X Version 06 Jul.-2004 FEATURE 1. High power rating and compact size 2.
V35, V40, V50, V60, V75, V95, V130, V140, V150, V175, V230, V250, V275, V300, V385, V420, V460, V510 CSA Recognized File No.
Description Disc Varistors with Radial Leads are standard metal oxide varistors designed mainly for electronic applications. They offer excellent surge protection for use in PCB s, computers, power supplies,