Polypropylene Pulse/High Frequency Capacitors R75 Series Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)

Transcription

1 Polypropylene Pulse/High Frequency Capacitors R75 Series Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Overview The R75 Series is constructed of metallized polypropylene film with radial leads of tinned wire. The radial leads are electrically welded to the metal layer on the ends of the capacitor winding. The capacitor is encapsulated in a self-extinguishing solvent resistant plastic case with thermosetting resin material meeting the UL 94V 0 requirements. Two different winding constructions are used depending on voltage parameters and lead spacing. Please see the Performance Characteristics for more information. Applications Typical applications include deflection circuits in televisions (S-correction), resonant capacitor in electronic ballast and compact lamp, power factor correction and coupling capacitor in switched mode power supply (SMPS), timing and oscillator circuits. Not suitable for across-the-line application (see Suppressor Capacitors). Automotive grade devices (up to lead spacing 22.5 mm) meet the demanding Automotive Electronics Council's AEC Q200 qualification requirements. Benefits Voltage range: 60 2,000 VDC range: 220 pf 33 µf Spacing: mm tolerance: ±5%, ±%, ±20% Climatic category: 55/5/56 IEC Operating temperature range of 55 C to +5 C RoHS compliance and lead-free terminations Tape and reel packaging in accordance with IEC Self-healing Automotive (AEC Q200) grades available up to lead spacing 22.5mm Part System R75 P N 2820 AA 30 K Series Metallized Polypropylene Rated Voltage (VDC) Spacing (mm) G = 60 I = 250 M = 400 P = 630 Q =,000 R =,250 T =,600 U = 2,000 D = 7.5 F = I = 5 N = 22.5 R = 27.5 W = 37.5 Code (pf) The last three digits represent significant figures. The first digit specifies the total number of zeros to be added. Packaging See Ordering Options Table Internal Use Tolerance J = ±5% K = ±% M = ±20% One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208

2 Ordering Options Table Spacing Nominal (mm) Type of s and Packaging Length (mm) and Packaging Code Standard and Packaging Options 7.5 Bulk (Bag) Short s 4 +2/ 0 AA Ammo Pack H 0 = 8.5 +/ 0.5 DQ Other and Packaging Options Tape & Reel (Standard Reel) H 0 =8.5 +/ 0.5 CK Bulk (Bag) Short s / 0 JA Bulk (Bag) Short s / 0 JB Bulk (Bag) Short s +/ JC Bulk (Bag) Short s / 0 JE Bulk (Bag) Short s / 0.2 JH Bulk (Bag) Long s 8 +/ JM Bulk (Bag) Long s 7 +/ 2 Z3 Standard and Packaging Options Bulk (Bag) Short s 4 +2/ 0 AA Ammo Pack H 0 = 8.5 +/ 0.5 DQ Other and Packaging Options Tape & Reel (Standard Reel) H 0 =8.5 +/ 0.5 GY Tape & Reel (Large Reel) H 0 =8.5 +/ 0.5 CK Bulk (Bag) Short s / 0 JA Bulk (Bag) Short s / 0 JB Bulk (Bag) Short s +/ JC Bulk (Bag) Short s / 0 JE Bulk (Bag) Short s / 0.2 JH Bulk (Bag) Long s 8 +/ JM Bulk (Bag) Long s 30 +5/ 0 40 Bulk (Bag) Long s 25 +2/ 50 Standard and Packaging Options Bulk (Bag) Short s 4 +2/ 0 AA Other and Packaging Options 27.5 Tape & Reel (Large Reel) H 0 =8.5 +/ 0.5 CK Bulk (Bag) Short s / 0 JB Bulk (Bag) Short s / 0 JE Bulk (Bag) Short s / 0.2 JH Bulk (Bag) Long s 30 +5/ 0 40 Bulk (Bag) Long s 25 +2/ 50 KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 2

3 Ordering Options Table cont'd Spacing Nominal (mm) Type of s and Packaging Length (mm) and Packaging Code Standard and Packaging Options Bulk (Tray) Straight s 4 +2/ 0 AA Other and Packaging Options 37.5 Bulk (Bag) Short s / 0 JB Bulk (Bag) Short s / 0 JE Bulk (Bag) Short s / 0.2 JH Bulk (Bag) Long s 30 +5/ 0 40 Bulk (Bag) Long s 25 +2/ 50 Dimensions Millimeters FRONT VIEW L SIDE VIEW B H d LL p p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 7.5 +/ / / / / / / / / / / / / / / / / / / / / / / / 0.05 Note: See Ordering Options Table for lead length (LL/Ho) options. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 3

4 Dimensions Millimeters FRONT VIEW L SIDE VIEW B H d p LL p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 5.0 +/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0.05 Note: See Ordering Options Table for lead length (LL/Ho) options. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 4

5 Performance Characteristics Dielectric Plates Winding s Protection Polypropylene film Metal layer deposited by evaporation under vacuum Non-inductive type Tinned wire Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. Related Documents IEC Sections 3 Rated Voltage V R (VDC) Rated Voltage V R (VAC) Range (µf) Values Tolerance ±5%, ±%, ±20% E2 series (IEC 60063) khz and +20 ± C Operating Temperature Range Rated Temperature T R Voltage Derating 55 C to +5 C +85 C Above +85 C DC and AC voltage derating is.25%/ C Climatic Category 55/5/56 IEC Relative Humidity (%) Maximum Humidity in Storage Conditions 30 Days Annual Average Temperature ( C) KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 5

6 Performance Characteristics cont'd Storage time: 24 months from the date marked on the label package Average relative humidity per year 70% Storage Conditions RH 85% for 30 days randomly distributed throughout the year Dew is absent Temperature: 40 to 80 C (see "Maximum Humidity in Storage Conditions" graph below) Test Voltage Drift Maximum Pulse Steepness Temperature Coefficient Self Inductance ( Length ~ 2 mm).6 x V R VDC for 2 seconds (between terminations) at +25 C ±5 C Maximum 0.5% after a 2 year storage period at a temperature of + C to +40 C and a relative humidity of 40% to 60% according to Table. For peak to peak voltages lower than rated voltage (Vpp <V R ), the specified dv/dt can be multiplied by the factor V R /Vpp (200 ±0) ppm/ C at khz Spacing (mm) L (nh) Maximum nh per mm lead and capacitor length. Maximum Values at 25 C ±5 C Frequency C 0. µf 0. µf < C.0 µf.0 µf < C 4.7 µf C > 4.7 µf Dissipation Factor tanδ khz 0.04% 0.05% 0.06% 0.% khz 0.06% 0.08% khz 0.25% Measured at +25 C ±5 C, 0 VDC 60 seconds Insulation Resistance C 0.33 μf Minimum Values Between Terminals C > 0.33 μf 0,000 MΩ ( 500,000 MΩ )* 30,000 MΩ µf ( 50,000 MΩ µf )* * typical value Qualification Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC Q200, please visit their website at KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 6

7 Maximum Voltage (V rms ) vs. Frequency (Sinusoidal Waveform/Th 40ºC) Vrms [V] 00 60Vdc / 90Vac Vrms [V] Vdc / 60Vac µf p= µf p= µf p=5.0 µf p= µf p= µf p= µf p= µf p= µf p= µf p= µf p= µf p= f [khz] f [khz] 0 00 Vrms [V] Vdc / 220Vac Vrms [V] Vdc / 250Vac µf p= µF p=.0 0. µf p= µf p= µf p= µf p= pf p= pf p= µF p= µf p=22.5 µf p= µf p= f [khz] f [khz] 0 00 Vrms [V] 00Vdc / 250Vac Vrms [V] 250 Vdc / 600Vac µf p= µf p= µf p= µf p= µf p= µf p= µf p= µf p= f [khz] f [khz] 0 00 Vrms [V] Vdc / 650Vac Vrms [V] Vdc / 700Vac pf p= µf p= µf p= µf p= µf p= pf p= µF p= µf p= µf p= µf p= f [khz] f [khz] 0 00 KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 7

8 Maximum Current (I rms ) vs. Frequency (Sinusoidal Waveform/Th 40ºC) Irms [A] 60Vdc / 90Vac Irms [A] 250Vdc / 60Vac µf p= µf p= µf p=5.0 µf p= µf p= µf p= µF p= µF p= µf p= µf p= µf p= µf p= f [khz] f [khz] 0 00 Irms [A] 400Vdc / 220Vac Irms [A] 630Vdc / 250Vac µF p= µF p=.0 0. µf p= µf p= µf p= µf p= pf p= pf p= µF p= µf p=22.5 µf p= µf p= f [khz] f [khz] 0 00 Irms [A] 0 00Vdc / 250Vac Irms [A] 0 250Vdc / 600Vac µF p= µf p= µf p= µf p= µf p= µF p= µf p= µf p= f [khz] f [khz] 0 00 Irms [A] 600Vdc / 650Vac Irms [A] 2000Vdc / 700Vac pf p= µF p= µf p= µf p= µf p= pf p= µF p= µf p= µf p= µf p= f [khz] f [khz] 0 00 KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 8

9 Environmental Test Data Damp Heat, Steady State Test Temperature: Relative humidity (RH): Test duration: Test Conditions: +40 C ± 2 C 93% ± 2% 56 days Performances Δ C/C 2%, Δ tanδ 0.00 at khz IR after test 50% of initial limit Endurance Test Test Conditions Performances Δ C/C 3%, Temperature: +85 C ±2 C Δ tanδ 0.00 at khz for C µf Voltage applied:.25 x V R (DC) Δ tanδ 0.00 at khz for C > µf Test duration: 2,000 hours IR after test 50% of initial limit Resistance to Soldering Heat Test Solder bath temperature: Dipping time (with heat screen): Test Conditions 260 C ±5 C seconds ± second Performances Δ C/C %, Δ tanδ 0.00 at khz for C µf Δ tanδ 0.00 at khz for C > µf IR after test initial limit Environmental Compliance All KEMET pulse capacitors are RoHS Compliant. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 9

10 Table Ratings & Part Reference Dimensions in mm () Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = %, M = 20% Part VDC VAC B H L ,000 75GD30()B0(2) R75GD30()B0(2) ,000 75GD320()B0(2) R75GD320()B0(2) ,000 75GD350()B0(2) R75GD350()B0(2) ,000 75GD380()A0(2) R75GD380()A0(2) ,000 75GD3220()A0(2) R75GD3220()A0(2) ,800 75GF320()A0(2) R75GF320()A0(2) ,800 75GF350()A0(2) R75GF350()A0(2) ,800 75GF380()A0(2) R75GF380()A0(2) ,800 75GF3220()A0(2) R75GF3220()A0(2) ,800 75GF3270()A0(2) R75GF3270()A0(2) ,800 75GF3330()A0(2) R75GF3330()A0(2) ,000 75GD2680()40(2) R75GD2680()40(2) ,000 75GD2820()40(2) R75GD2820()40(2) ,000 75GD30()40(2) R75GD30()40(2) ,000 75GD320()40(2) R75GD320()40(2) ,000 75GD350()00(2) R75GD350()00(2) ,000 75GD380()30(2) R75GD380()30(2) ,600 75GF2820()00(2) R75GF2820()00(2) ,600 75GF30()30(2) R75GF30()30(2) ,600 75GF320()00(2) R75GF320()00(2) ,600 75GF350()00(2) R75GF350()00(2) ,600 75GF380()00(2) R75GF380()00(2) ,600 75GF3220()30(2) R75GF3220()30(2) ,000 75GI380()00(2) R75GI380()00(2) ,000 75GI3220()00(2) R75GI3220()00(2) ,000 75GI3270()00(2) R75GI3270()00(2) ,000 75GI3330()00(2) R75GI3330()00(2) ,000 75GI3390()00(2) R75GI3390()00(2) ,000 75GI3470()00(2) R75GI3470()00(2) ,000 75GI3470()60(2) R75GI3470()60(2) ,000 75GI3560()00(2) R75GI3560()00(2) ,000 75GI3560()60(2) R75GI3560()60(2) ,000 75GI3680()00(2) R75GI3680()00(2) ,000 75GI3680()60(2) R75GI3680()60(2) ,000 75GI3820()00(2) R75GI3820()00(2) ,000 75GI40()00(2) R75GI40()00(2) ,200 75GN3820()00(2) R75GN3820()00(2) ,200 75GN40()00(2) R75GN40()00(2) ,200 75GN420()00(2) R75GN420()00(2) ,200 75GN450()00(2) R75GN450()00(2) ,200 75GN480()00(2) R75GN480()00(2) ,000 75GR450()00(2) R75GR450()00(2) ,000 75GR480()00(2) R75GR480()00(2) ,000 75GR4220()30(2) R75GR4220()30(2) ,000 75GR4270()00(2) R75GR4270()00(2) ,000 75GR4330()00(2) R75GR4330()00(2) ,000 75GR4390()00(2) R75GR4390()00(2) ,000 75GR4470()30(2) R75GR4470()30(2) ,000 75GR4560()00(2) R75GR4560()00(2) ,000 75GR4680()00(2) R75GR4680()00(2) ,000 75GR4820()00(2) R75GR4820()00(2) ,000 75GR50()00(2) R75GR50()00(2) ,000 75GR520()00(2) R75GR520()00(2) ,200 75GW4330()00(2) R75GW4330()00(2) ,200 75GW4390()00(2) R75GW4390()00(2) ,200 75GW4470()00(2) R75GW4470()00(2) ,200 75GW4560()00(2) R75GW4560()00(2) ,200 75GW4680()00(2) R75GW4680()00(2) ,200 75GW4820()00(2) R75GW4820()00(2) ,200 75GW50()00(2) R75GW50()00(2) VDC VAC B (mm) H (mm) L (mm) Part KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208

11 Table Ratings & Part Reference cont'd Dimensions in mm () Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = %, M = 20% Part VDC VAC B H L ,200 75GW520()00(2) R75GW520()00(2) ,200 75GW550()00(2) R75GW550()00(2) ,200 75GW580()00(2) R75GW580()00(2) ,200 75GW5220()00(2) R75GW5220()00(2) ,200 75GW5270()00(2) R75GW5270()00(2) ,200 75GW5330()00(2) R75GW5330()00(2) ,000 75ID2680()B0(2) R75ID2680()B0(2) ,000 75ID2820()B0(2) R75ID2820()B0(2) ,000 75ID30()B0(2) R75ID30()B0(2) ,000 75ID320()B0(2) R75ID320()B0(2) ,000 75ID350()A0(2) R75ID350()A0(2) ,000 75ID380()A0(2) R75ID380()A0(2) ,000 75IF2820()A0(2) R75IF2820()A0(2) ,000 75IF30()A0(2) R75IF30()A0(2) ,000 75IF320()A0(2) R75IF320()A0(2) ,000 75IF350()A0(2) R75IF350()A0(2) ,000 75IF380()A0(2) R75IF380()A0(2) ,000 75IF3220()A0(2) R75IF3220()A0(2) ,000 75ID2270()40(2) R75ID2270()40(2) ,000 75ID2330()40(2) R75ID2330()40(2) ,000 75ID2390()40(2) R75ID2390()40(2) ,000 75ID2470()40(2) R75ID2470()40(2) ,000 75ID2560()40(2) R75ID2560()40(2) ,000 75ID2680()40(2) R75ID2680()40(2) ,000 75ID2820()40(2) R75ID2820()40(2) ,000 75ID30()30(2) R75ID30()30(2) ,000 75ID320()30(2) R75ID320()30(2) ,000 75IF2330()00(2) R75IF2330()00(2) ,000 75IF2390()00(2) R75IF2390()00(2) ,000 75IF2470()30(2) R75IF2470()30(2) ,000 75IF2560()30(2) R75IF2560()30(2) ,000 75IF2680()30(2) R75IF2680()30(2) ,000 75IF2820()30(2) R75IF2820()30(2) ,000 75IF30()30(2) R75IF30()30(2) ,000 75IF320()30(2) R75IF320()30(2) ,000 75IF350()30(2) R75IF350()30(2) ,000 75II320()30(2) R75II320()30(2) ,000 75II350()30(2) R75II350()30(2) ,000 75II380()40(2) R75II380()40(2) ,000 75II3220()40(2) R75II3220()40(2) ,000 75II3270()40(2) R75II3270()40(2) ,000 75II3330()40(2) R75II3330()40(2) ,000 75II3390()40(2) R75II3390()40(2) ,000 75II3390()70(2) R75II3390()70(2) ,000 75II3470()40(2) R75II3470()40(2) ,000 75II3470()80(2) R75II3470()80(2) ,000 75II3560()40(2) R75II3560()40(2) ,000 75II3560()80(2) R75II3560()80(2) ,000 75II3680()40(2) R75II3680()40(2) ,000 75II3680()80(2) R75II3680()80(2) ,000 75II3820()40(2) R75II3820()40(2) ,000 75II3820()80(2) R75II3820()80(2) ,000 75II40()40(2) R75II40()40(2) ,000 75II420()40(2) R75II420()40(2) ,500 75IN3390()30(2) R75IN3390()30(2) ,500 75IN3470()30(2) R75IN3470()30(2) ,500 75IN3560()40(2) R75IN3560()40(2) ,500 75IN3680()40(2) R75IN3680()40(2) ,500 75IN3820()40(2) R75IN3820()40(2) ,500 75IN40()40(2) R75IN40()40(2) VDC VAC B (mm) H (mm) L (mm) Part KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208

12 Table Ratings & Part Reference cont'd Dimensions in mm Part VDC VAC B H L ,500 75IN420()40(2) R75IN420()40(2) ,500 75IN450()40(2) R75IN450()40(2) ,500 75IN480()40(2) R75IN480()40(2) ,500 75IN4220()40(2) R75IN4220()40(2) ,500 75IN4270()40(2) R75IN4270()40(2) ,500 75IN4330()40(2) R75IN4330()40(2) ,000 75IR40()30(2) R75IR40()30(2) ,000 75IR420()30(2) R75IR420()30(2) ,000 75IR450()40(2) R75IR450()40(2) ,000 75IR480()40(2) R75IR480()40(2) ,000 75IR4220()50(2) R75IR4220()50(2) ,000 75IR4270()40(2) R75IR4270()40(2) ,000 75IR4330()40(2) R75IR4330()40(2) ,000 75IR4390()40(2) R75IR4390()40(2) ,000 75IR4470()50(2) R75IR4470()50(2) ,000 75IR4560()40(2) R75IR4560()40(2) ,000 75IR4680()40(2) R75IR4680()40(2) ,000 75IR4820()40(2) R75IR4820()40(2) ,000 75IR50()40(2) R75IR50()40(2) ,000 75IR520()40(2) R75IR520()40(2) ,000 75IW4330()40(2) R75IW4330()40(2) ,000 75IW4390()40(2) R75IW4390()40(2) ,000 75IW4470()40(2) R75IW4470()40(2) ,000 75IW4560()40(2) R75IW4560()40(2) ,000 75IW4680()40(2) R75IW4680()40(2) ,000 75IW4820()40(2) R75IW4820()40(2) ,000 75IW50()40(2) R75IW50()40(2) ,000 75IW520()40(2) R75IW520()40(2) ,000 75IW550()40(2) R75IW550()40(2) ,000 75IW580()40(2) R75IW580()40(2) ,000 75IW5220()40(2) R75IW5220()40(2) ,000 75IW5270()40(2) R75IW5270()40(2) ,000 75IW5330()40(2) R75IW5330()40(2) ,000 75MD2270()B0(2) R75MD2270()B0(2) ,000 75MD2330()B0(2) R75MD2330()B0(2) ,000 75MD2390()B0(2) R75MD2390()B0(2) ,000 75MD2470()B0(2) R75MD2470()B0(2) ,000 75MD2560()A0(2) R75MD2560()A0(2) ,000 75MD2680()A0(2) R75MD2680()A0(2) ,500,200,000 75MD20()40(2) R75MD20()40(2) ,500,200,000 75MD220()40(2) R75MD220()40(2) ,500,200,000 75MD250()40(2) R75MD250()40(2) ,500,200,000 75MD280()40(2) R75MD280()40(2) ,500,200,000 75MD2220()40(2) R75MD2220()40(2) ,500,200,000 75MD2270()40(2) R75MD2270()40(2) ,500,200,000 75MD2330()40(2) R75MD2330()40(2) ,500,200,000 75MD2390()30(2) R75MD2390()30(2) ,500,200,000 75MD2470()30(2) R75MD2470()30(2) ,300,040,000 75ΜF250()00(2) R75ΜF250()00(2) ,300,040,000 75ΜF280()00(2) R75ΜF280()00(2) ,300,040,000 75ΜF2220()30(2) R75ΜF2220()30(2) ,300,040,000 75ΜF2270()30(2) R75ΜF2270()30(2) ,300,040,000 75ΜF2330()30(2) R75ΜF2330()30(2) ,300,040,000 75ΜF2390()30(2) R75ΜF2390()30(2) ,300,040,000 75ΜF2470()30(2) R75ΜF2470()30(2) ,300,040,000 75ΜF2560()30(2) R75ΜF2560()30(2) ,300,040,000 75ΜF2680()30(2) R75ΜF2680()30(2) ,000 75MI2680()30(2) R75MI2680()30(2) ,000 75MI2820()30(2) R75MI2820()30(2) ,000 75MI30()30(2) R75MI30()30(2) VDC VAC B (mm) H (mm) L (mm) () Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = %, M = 20% Part KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 2

13 Table Ratings & Part Reference cont'd Dimensions in mm Part VDC VAC B H L ,000 75MI320()30(2) R75MI320()30(2) ,000 75MI350()30(2) R75MI350()30(2) ,000 75MI380()30(2) R75MI380()30(2) ,000 75MI3220()30(2) R75MI3220()30(2) ,000 75MI3220()70(2) R75MI3220()70(2) ,000 75MI3270()30(2) R75MI3270()30(2) ,000 75MI3270()70(2) R75MI3270()70(2) ,000 75MI3330()30(2) R75MI3330()30(2) ,000 75MI3330()70(2) R75MI3330()70(2) ,000 75MI3390()30(2) R75MI3390()30(2) ,000 75MI3470()30(2) R75MI3470()30(2) ,000 75MI3560()30(2) R75MI3560()30(2) ,000 75MN380()30(2) R75MN380()30(2) ,000 75MN3220()30(2) R75MN3220()30(2) ,000 75MN3270()30(2) R75MN3270()30(2) ,000 75MN3330()30(2) R75MN3330()30(2) ,000 75MN3390()30(2) R75MN3390()30(2) ,000 75MN3470()30(2) R75MN3470()30(2) ,000 75MN3560()30(2) R75MN3560()30(2) ,000 75MN3680()30(2) R75MN3680()30(2) ,000 75MN3820()30(2) R75MN3820()30(2) ,000 75MN40()30(2) R75MN40()30(2) ,000 75MN420()30(2) R75MN420()30(2) ,000 75MN450()30(2) R75MN450()30(2) ,000 75MR3560()30(2) R75MR3560()30(2) ,000 75MR3680()30(2) R75MR3680()30(2) ,000 75MR3820()30(2) R75MR3820()30(2) ,000 75MR40()40(2) R75MR40()40(2) ,000 75MR420()30(2) R75MR420()30(2) ,000 75MR450()30(2) R75MR450()30(2) ,000 75MR480()30(2) R75MR480()30(2) ,000 75MR4220()40(2) R75MR4220()40(2) ,000 75MR4270()30(2) R75MR4270()30(2) ,000 75MR4330()30(2) R75MR4330()30(2) ,000 75MR4390()30(2) R75MR4390()30(2) ,000 75MR4470()30(2) R75MR4470()30(2) ,000 75MR4560()30(2) R75MR4560()30(2) ,000 75MW420()30(2) R75MW420()30(2) ,000 75MW450()30(2) R75MW450()30(2) ,000 75MW480()30(2) R75MW480()30(2) ,000 75MW4220()30(2) R75MW4220()30(2) ,000 75MW4270()30(2) R75MW4270()30(2) ,000 75MW4330()30(2) R75MW4330()30(2) ,000 75MW4390()30(2) R75MW4390()30(2) ,000 75MW4470()30(2) R75MW4470()30(2) ,000 75MW4560()30(2) R75MW4560()30(2) ,000 75MW4680()20(2) R75MW4680()20(2) ,000 75MW4820()30(2) R75MW4820()30(2) ,000 75MW50()30(2) R75MW50()30(2) ,000 75MW520()20(2) R75MW520()20(2) ,000 75MW550()30(2) R75MW550()30(2) ,000 75PD20()B0(2) R75PD20()B0(2) ,000 75PD220()B0(2) R75PD220()B0(2) ,000 75PD250()B0(2) R75PD250()B0(2) ,000 75PD280()B0(2) R75PD280()B0(2) ,000 75PD2220()A0(2) R75PD2220()A0(2) ,000 75PD2270()A0(2) R75PD2270()A0(2) ,400 3,024,000 75PD330()40(2) R75PD330()40(2) ,400 3,024,000 75PD390()40(2) R75PD390()40(2) ,400 3,024,000 75PD470()40(2) R75PD470()40(2) VDC VAC B (mm) H (mm) L (mm) () Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = %, M = 20% Part KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 3

14 Table Ratings & Part Reference cont'd Dimensions in mm () Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = %, M = 20% Part VDC VAC B H L ,400 3,024,000 75PD560()40(2) R75PD560()40(2) ,400 3,024,000 75PD680()40(2) R75PD680()40(2) ,400 3,024,000 75PD820()40(2) R75PD820()40(2) ,400 3,024,000 75PD20()40(2) R75PD20()40(2) ,400 3,024,000 75PD220()40(2) R75PD220()40(2) ,400 3,024,000 75PD250()30(2) R75PD250()30(2) ,400 3,024,000 75PD280()30(2) R75PD280()30(2) ,000 2,520,000 75PF0()00(2) R75PF0()00(2) ,000 2,520,000 75PF20()00(2) R75PF20()00(2) ,000 2,520,000 75PF50()00(2) R75PF50()00(2) ,000 2,520,000 75PF80()00(2) R75PF80()00(2) ,000 2,520,000 75PF220()00(2) R75PF220()00(2) ,000 2,520,000 75PF270()00(2) R75PF270()00(2) ,000 2,520,000 75PF330()00(2) R75PF330()00(2) ,000 2,520,000 75PF390()00(2) R75PF390()00(2) ,000 2,520,000 75PF470()00(2) R75PF470()00(2) ,000 2,520,000 75PF560()00(2) R75PF560()00(2) ,000 2,520,000 75PF680()00(2) R75PF680()00(2) ,000 2,520,000 75PF820()00(2) R75PF820()00(2) ,000 2,520,000 75PF20()30(2) R75PF20()30(2) ,000 2,520,000 75PF220()30(2) R75PF220()30(2) ,000 2,520,000 75PF250()30(2) R75PF250()30(2) ,000 2,520,000 75PF280()30(2) R75PF280()30(2) ,000 2,520,000 75PF2220()30(2) R75PF2220()30(2) ,000,260,000 75PI2270()00(2) R75PI2270()00(2) ,000,260,000 75PI2330()00(2) R75PI2330()00(2) ,000,260,000 75PI2390()30(2) R75PI2390()30(2) ,000,260,000 75PI2470()30(2) R75PI2470()30(2) ,000,260,000 75PI2560()30(2) R75PI2560()30(2) ,000,260,000 75PI2680()30(2) R75PI2680()30(2) ,000,260,000 75PI2820()30(2) R75PI2820()30(2) ,000,260,000 75PI30()30(2) R75PI30()30(2) ,000,260,000 75PI30()70(2) R75PI30()70(2) ,000,260,000 75PI320()30(2) R75PI320()30(2) ,000,260,000 75PI320()70(2) R75PI320()70(2) ,000,260,000 75PI350()30(2) R75PI350()30(2) ,000,260,000 75PI350()70(2) R75PI350()70(2) ,000,260,000 75PI380()30(2) R75PI380()30(2) ,000,260,000 75PI380()70(2) R75PI380()70(2) ,000,260,000 75PI3220()30(2) R75PI3220()30(2) ,000,260,000 75PI3270()30(2) R75PI3270()30(2) ,000,260,000 75PI3330()30(2) R75PI3330()30(2) ,000 75PN2820()30(2) R75PN2820()30(2) ,000 75PN30()30(2) R75PN30()30(2) ,000 75PN320()30(2) R75PN320()30(2) ,000 75PN350()30(2) R75PN350()30(2) ,000 75PN380()30(2) R75PN380()30(2) ,000 75PN3220()30(2) R75PN3220()30(2) ,000 75PN3270()30(2) R75PN3270()30(2) ,000 75PN3330()30(2) R75PN3330()30(2) ,000 75PN3390()30(2) R75PN3390()30(2) ,000 75PN3470()30(2) R75PN3470()30(2) ,000 75PN3560()30(2) R75PN3560()30(2) ,000 75PN3680()30(2) R75PN3680()30(2) ,800 75PR3390()30(2) R75PR3390()30(2) ,800 75PR3470()40(2) R75PR3470()40(2) ,800 75PR3560()30(2) R75PR3560()30(2) ,800 75PR3680()30(2) R75PR3680()30(2) ,800 75PR3820()30(2) R75PR3820()30(2) ,800 75PR40()30(2) R75PR40()30(2) VDC VAC B (mm) H (mm) L (mm) Part KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 4

15 Table Ratings & Part Reference cont'd Dimensions in mm () Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = %, M = 20% Part VDC VAC B H L ,800 75PR420()40(2) R75PR420()40(2) ,800 75PR450()30(2) R75PR450()30(2) ,800 75PR480()30(2) R75PR480()30(2) ,800 75PR4220()30(2) R75PR4220()30(2) ,800 75PR4270()30(2) R75PR4270()30(2) ,800 75PR4330()30(2) R75PR4330()30(2) ,400 75PW3680()30(2) R75PW3680()30(2) ,400 75PW3820()30(2) R75PW3820()30(2) ,400 75PW40()30(2) R75PW40()30(2) ,400 75PW420()30(2) R75PW420()30(2) ,400 75PW450()30(2) R75PW450()30(2) ,400 75PW480()30(2) R75PW480()30(2) ,400 75PW4220()30(2) R75PW4220()30(2) ,400 75PW4270()30(2) R75PW4270()30(2) ,400 75PW4330()30(2) R75PW4330()30(2) ,400 75PW4390()30(2) R75PW4390()30(2) ,400 75PW4470()30(2) R75PW4470()30(2) ,400 75PW4560()30(2) R75PW4560()30(2) ,400 75PW4680()20(2) R75PW4680()20(2) ,400 75PW4820()30(2) R75PW4820()30(2), ,000 4,000,000 75QI220()00(2) R75QI220()00(2), ,000 4,000,000 75QI250()00(2) R75QI250()00(2), ,000 4,000,000 75QI280()00(2) R75QI280()00(2), ,000 4,000,000 75QI2220()00(2) R75QI2220()00(2), ,000 4,000,000 75QI2270()00(2) R75QI2270()00(2), ,000 4,000,000 75QI2330()00(2) R75QI2330()00(2), ,000 4,000,000 75QI2390()00(2) R75QI2390()00(2), ,000 4,000,000 75QI2470()00(2) R75QI2470()00(2), ,000 4,000,000 75QI2470()60(2) R75QI2470()60(2), ,000 4,000,000 75QI2560()00(2) R75QI2560()00(2), ,000 4,000,000 75QI2560()60(2) R75QI2560()60(2), ,000 4,000,000 75QI2680()00(2) R75QI2680()00(2), ,000 4,000,000 75QI2680()60(2) R75QI2680()60(2), ,000 4,000,000 75QI2820()00(2) R75QI2820()00(2), ,000 4,000,000 75QI30()00(2) R75QI30()00(2), ,200,000 75QN2470()00(2) R75QN2470()00(2), ,200,000 75QN2560()00(2) R75QN2560()00(2), ,200,000 75QN2680()00(2) R75QN2680()00(2), ,200,000 75QN2820()00(2) R75QN2820()00(2), ,200,000 75QN30()00(2) R75QN30()00(2), ,200,000 75QN320()00(2) R75QN320()00(2), ,200,000 75QN350()00(2) R75QN350()00(2), ,200,000 75QN380()00(2) R75QN380()00(2), ,200,000 75QN3220()00(2) R75QN3220()00(2), ,000 75QR350()00(2) R75QR350()00(2), ,000 75QR380()00(2) R75QR380()00(2), ,000 75QR3220()(2) R75QR3220()(2), ,000 75QR3270()00(2) R75QR3270()00(2), ,000 75QR3330()00(2) R75QR3330()00(2), ,000 75QR3390()00(2) R75QR3390()00(2), ,000 75QR3470()(2) R75QR3470()(2), ,000 75QR3560()(2) R75QR3560()(2), ,000 75QR3680()00(2) R75QR3680()00(2), ,000 75QR3820()00(2) R75QR3820()00(2), ,000 75QR40()00(2) R75QR40()00(2), ,000 75QR420()00(2) R75QR420()00(2), ,000 75QR450()00(2) R75QR450()00(2), ,000 75QW3270()00(2) R75QW3270()00(2), ,000 75QW3330()00(2) R75QW3330()00(2), ,000 75QW3390()00(2) R75QW3390()00(2) VDC VAC B (mm) H (mm) L (mm) Part KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 5

16 Table Ratings & Part Reference cont'd Dimensions in mm () Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = %, M = 20% Part VDC VAC B H L, ,000 75QW3470()00(2) R75QW3470()00(2), ,000 75QW3560()00(2) R75QW3560()00(2), ,000 75QW3680()00(2) R75QW3680()00(2), ,000 75QW3820()00(2) R75QW3820()00(2), ,000 75QW40()00(2) R75QW40()00(2), ,000 75QW420()00(2) R75QW420()00(2), ,000 75QW450()00(2) R75QW450()00(2), ,000 75QW480()00(2) R75QW480()00(2), ,000 75QW4220()00(2) R75QW4220()00(2), ,000 75QW4220()30(2) R75QW4220()30(2), ,000 75QW4270()00(2) R75QW4270()00(2), ,000 75QW4330()00(2) R75QW4330()00(2), ,000 75QW4390()00(2) R75QW4390()00(2), ,000 8,000,000 75QD0220()30(2) R75QD0220()30(2), ,000 8,000,000 75QD0270()30(2) R75QD0270()30(2), ,000 8,000,000 75QD0330()30(2) R75QD0330()30(2), ,000 8,000,000 75QD0390()30(2) R75QD0390()30(2), ,000 8,000,000 75QD0470()30(2) R75QD0470()30(2), ,000 8,000,000 75QD0560()30(2) R75QD0560()30(2), ,000 8,000,000 75QD0680()30(2) R75QD0680()30(2), ,000 8,000,000 75QD0820()30(2) R75QD0820()30(2), ,000 8,000,000 75QD0()30(2) R75QD0()30(2), ,000 8,000,000 75QD20()30(2) R75QD20()30(2), ,000 8,000,000 75QD50()30(2) R75QD50()30(2), ,000 8,000,000 75QD80()30(2) R75QD80()30(2), ,000 8,000,000 75QD220()30(2) R75QD220()30(2), ,000 8,000,000 75QD270()30(2) R75QD270()30(2), ,000 8,000,000 75QD330()30(2) R75QD330()30(2), ,000 8,000,000 75QD390()30(2) R75QD390()30(2), ,000 8,000,000 75QD470()30(2) R75QD470()30(2), ,000 8,000,000 75QD560()30(2) R75QD560()30(2), ,000 8,000,000 75QD680()30(2) R75QD680()30(2), ,000 8,000,000 75QD820()30(2) R75QD820()30(2), ,300 8,250,000 75RI820()30(2) R75RI820()30(2), ,300 8,250,000 75RI20()30(2) R75RI20()30(2), ,300 8,250,000 75RI220()30(2) R75RI220()30(2), ,300 8,250,000 75RI250()30(2) R75RI250()30(2), ,300 8,250,000 75RI280()30(2) R75RI280()30(2), ,300 8,250,000 75RI2220()30(2) R75RI2220()30(2), ,300 8,250,000 75RI2220()70(2) R75RI2220()70(2), ,300 8,250,000 75RI2270()30(2) R75RI2270()30(2), ,300 8,250,000 75RI2270()70(2) R75RI2270()70(2), ,300 8,250,000 75RI2330()30(2) R75RI2330()30(2), ,300 8,250,000 75RI2330()70(2) R75RI2330()70(2), ,300 8,250,000 75RI2390()30(2) R75RI2390()30(2), ,300 8,250,000 75RI2470()30(2) R75RI2470()30(2), ,300 8,250,000 75RI2560()30(2) R75RI2560()30(2), ,0 5,250,000 75RN2330()30(2) R75RN2330()30(2), ,0 5,250,000 75RN2390()30(2) R75RN2390()30(2), ,0 5,250,000 75RN2470()30(2) R75RN2470()30(2), ,0 5,250,000 75RN2560()30(2) R75RN2560()30(2), ,0 5,250,000 75RN2680()30(2) R75RN2680()30(2), ,0 5,250,000 75RN2820()30(2) R75RN2820()30(2), ,0 5,250,000 75RN30()30(2) R75RN30()30(2), ,0 5,250,000 75RN320()30(2) R75RN320()30(2), ,0 5,250,000 75RN350()30(2) R75RN350()30(2), ,250,000 75RR30()40(2) R75RR30()40(2), ,250,000 75RR320()40(2) R75RR320()40(2), ,250,000 75RR350()40(2) R75RR350()40(2), ,250,000 75RR380()40(2) R75RR380()40(2) VDC VAC B (mm) H (mm) L (mm) Part KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 6

17 Table Ratings & Part Reference cont'd Dimensions in mm () Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = %, M = 20% Part VDC VAC B H L, ,250,000 75RR3220()40(2) R75RR3220()40(2), ,250,000 75RR3270()40(2) R75RR3270()40(2), ,250,000 75RR3330()30(2) R75RR3330()30(2), ,250,000 75RR3390()40(2) R75RR3390()40(2), ,250,000 75RR3470()40(2) R75RR3470()40(2), ,250,000 75RR3560()40(2) R75RR3560()40(2), ,250,000 75RR3680()40(2) R75RR3680()40(2), ,250,000 75RR3820()40(2) R75RR3820()40(2), ,000 75RW3270()30(2) R75RW3270()30(2), ,000 75RW3330()20(2) R75RW3330()20(2), ,000 75RW3390()30(2) R75RW3390()30(2), ,000 75RW3470()40(2) R75RW3470()40(2), ,000 75RW3560()40(2) R75RW3560()40(2), ,000 75RW3680()30(2) R75RW3680()30(2), ,000 75RW3820()40(2) R75RW3820()40(2), ,000 75RW40()30(2) R75RW40()30(2), ,000 75RW420()40(2) R75RW420()40(2), ,000 75RW450()40(2) R75RW450()40(2), ,000 75RW480()30(2) R75RW480()30(2), ,000 75RW4220()30(2) R75RW4220()30(2), ,000 9,200,000 75TI390()30(2) R75TI390()30(2), ,000 9,200,000 75TI470()30(2) R75TI470()30(2), ,000 9,200,000 75TI560()30(2) R75TI560()30(2), ,000 9,200,000 75TI680()30(2) R75TI680()30(2), ,000 9,200,000 75TI820()30(2) R75TI820()30(2), ,000 9,200,000 75TI20()30(2) R75TI20()30(2), ,000 9,200,000 75TI220()30(2) R75TI220()30(2), ,000 9,200,000 75TI250()30(2) R75TI250()30(2), ,000 9,200,000 75TI280()30(2) R75TI280()30(2), ,000 9,200,000 75TI280()70(2) R75TI280()70(2), ,000 9,200,000 75TI2220()30(2) R75TI2220()30(2), ,000 9,200,000 75TI2220()70(2) R75TI2220()70(2), ,000 9,200,000 75TI2270()30(2) R75TI2270()30(2), ,000 9,200,000 75TI2330()30(2) R75TI2330()30(2), ,000 9,600,000 75TN2270()30(2) R75TN2270()30(2), ,000 9,600,000 75TN2330()30(2) R75TN2330()30(2), ,000 9,600,000 75TN2390()30(2) R75TN2390()30(2), ,000 9,600,000 75TN2470()30(2) R75TN2470()30(2), ,000 9,600,000 75TN2560()30(2) R75TN2560()30(2), ,000 9,600,000 75TN2680()30(2) R75TN2680()30(2), ,000 9,600,000 75TN2820()30(2) R75TN2820()30(2), ,000 9,600,000 75TN30()30(2) R75TN30()30(2), ,000 9,600,000 75TN320()30(2) R75TN320()30(2), ,500 4,800,000 75TR2680()30(2) R75TR2680()30(2), ,500 4,800,000 75TR2820()30(2) R75TR2820()30(2), ,500 4,800,000 75TR30()40(2) R75TR30()40(2), ,500 4,800,000 75TR320()30(2) R75TR320()30(2), ,500 4,800,000 75TR350()30(2) R75TR350()30(2), ,500 4,800,000 75TR380()20(2) R75TR380()20(2), ,500 4,800,000 75TR3220()40(2) R75TR3220()40(2), ,500 4,800,000 75TR3270()30(2) R75TR3270()30(2), ,500 4,800,000 75TR3330()30(2) R75TR3330()30(2), ,500 4,800,000 75TR3390()30(2) R75TR3390()30(2), ,500 4,800,000 75TR3470()30(2) R75TR3470()30(2), ,500 4,800,000 75TR3560()30(2) R75TR3560()30(2), ,400,000 75TW380()30(2) R75TW380()30(2), ,400,000 75TW3220()20(2) R75TW3220()20(2), ,400,000 75TW3270()30(2) R75TW3270()30(2), ,400,000 75TW3330()30(2) R75TW3330()30(2), ,400,000 75TW3390()30(2) R75TW3390()30(2) VDC VAC B (mm) H (mm) L (mm) Part KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 7

18 Table Ratings & Part Reference cont'd Dimensions in mm () Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = %, M = 20% Part VDC VAC B H L, ,400,000 75TW3470()20(2) R75TW3470()20(2), ,400,000 75TW3560()30(2) R75TW3560()30(2), ,400,000 75TW3680()20(2) R75TW3680()20(2), ,400,000 75TW3820()30(2) R75TW3820()30(2), ,400,000 75TW40()30(2) R75TW40()30(2), ,400,000 75TW420()30(2) R75TW420()30(2), ,400,000 75TW450()30(2) R75TW450()30(2) 2, ,500 38,000,000 75UI0()40(2) R75UI0()40(2) 2, ,500 38,000,000 75UI20()40(2) R75UI20()40(2) 2, ,500 38,000,000 75UI50()40(2) R75UI50()40(2) 2, ,500 38,000,000 75UI80()40(2) R75UI80()40(2) 2, ,500 38,000,000 75UI220()40(2) R75UI220()40(2) 2, ,500 38,000,000 75UI270()40(2) R75UI270()40(2) 2, ,500 38,000,000 75UI330()40(2) R75UI330()40(2) 2, ,500 38,000,000 75UI390()30(2) R75UI390()30(2) 2, ,500 38,000,000 75UI470()30(2) R75UI470()30(2) 2, ,500 38,000,000 75UI560()30(2) R75UI560()30(2) 2, ,500 38,000,000 75UI680()30(2) R75UI680()30(2) 2, ,500 38,000,000 75UI820()30(2) R75UI820()30(2) 2, ,500 38,000,000 75UI20()30(2) R75UI20()30(2) 2, ,500 38,000,000 75UI220()30(2) R75UI220()30(2) 2, ,500 38,000,000 75UI220()70(2) R75UI220()70(2) 2, ,500 38,000,000 75UI250()30(2) R75UI250()30(2) 2, ,500 38,000,000 75UI250()70(2) R75UI250()70(2) 2, ,500 38,000,000 75UI280()30(2) R75UI280()30(2) 2, ,500 38,000,000 75UI280()70(2) R75UI280()70(2) 2, ,500 38,000,000 75UI2220()30(2) R75UI2220()30(2) 2, ,500 38,000,000 75UI2270()30(2) R75UI2270()30(2) 2, ,500 4,000,000 75UN470()30(2) R75UN470()30(2) 2, ,500 4,000,000 75UN560()30(2) R75UN560()30(2) 2, ,500 4,000,000 75UN680()30(2) R75UN680()30(2) 2, ,500 4,000,000 75UN820()30(2) R75UN820()30(2) 2, ,500 4,000,000 75UN20()30(2) R75UN20()30(2) 2, ,500 4,000,000 75UN220()30(2) R75UN220()30(2) 2, ,500 4,000,000 75UN250()30(2) R75UN250()30(2) 2, ,500 4,000,000 75UN280()30(2) R75UN280()30(2) 2, ,500 4,000,000 75UN2220()30(2) R75UN2220()30(2) 2, ,500 4,000,000 75UN2270()30(2) R75UN2270()30(2) 2, ,500 4,000,000 75UN2330()30(2) R75UN2330()30(2) 2, ,500 4,000,000 75UN2390()30(2) R75UN2390()30(2) 2, ,500 4,000,000 75UN2470()30(2) R75UN2470()30(2) 2, ,500 4,000,000 75UN2560()30(2) R75UN2560()30(2) 2, ,500 4,000,000 75UN2680()30(2) R75UN2680()30(2) 2, ,000 4,000,000 75UR2470()30(2) R75UR2470()30(2) 2, ,000 4,000,000 75UR2560()30(2) R75UR2560()30(2) 2, ,000 4,000,000 75UR2680()40(2) R75UR2680()40(2) 2, ,000 4,000,000 75UR2820()40(2) R75UR2820()40(2) 2, ,000 4,000,000 75UR30()30(2) R75UR30()30(2) 2, ,000 4,000,000 75UR320()30(2) R75UR320()30(2) 2, ,000 4,000,000 75UR350()40(2) R75UR350()40(2) 2, ,000 4,000,000 75UR380()40(2) R75UR380()40(2) 2, ,000 4,000,000 75UR3220()40(2) R75UR3220()40(2) 2, ,000 4,000,000 75UR3270()30(2) R75UR3270()30(2) 2, ,000 4,000,000 75UR3330()40(2) R75UR3330()40(2) 2, ,000 4,000,000 75UR3390()30(2) R75UR3390()30(2) 2, ,000 4,000,000 75UR3470()40(2) R75UR3470()40(2) 2, ,000,000 75UW350()30(2) R75UW350()30(2) 2, ,000,000 75UW380()30(2) R75UW380()30(2) 2, ,000,000 75UW3220()30(2) R75UW3220()30(2) 2, ,000,000 75UW3270()30(2) R75UW3270()30(2) VDC VAC B (mm) H (mm) L (mm) Part KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 8

19 Table Ratings & Part Reference cont'd Dimensions in mm Part VDC VAC B H L 2, ,000,000 75UW3330()30(2) R75UW3330()30(2) 2, ,000,000 75UW3390()30(2) R75UW3390()30(2) 2, ,000,000 75UW3470()30(2) R75UW3470()30(2) 2, ,000,000 75UW3560()40(2) R75UW3560()40(2) 2, ,000,000 75UW3680()30(2) R75UW3680()30(2) 2, ,000,000 75UW3820()40(2) R75UW3820()40(2) 2, ,000,000 75UW40()30(2) R75UW40()30(2) VDC VAC B (mm) H (mm) L (mm) () Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = %, M = 20% Part KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 9

20 Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 83ºC for SnPb eutectic alloy to 27 22ºC for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 60 70ºC). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 5 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication Edition 2 serves as a solid guideline for successful soldering. Please see Figure. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Manual Soldering Recommendations Wave Soldering Recommendations Following is the recommendation for manual soldering with a soldering iron. Soldering iron bit temperature ( C) Recommended Soldering Temperature Soldering time (seconds) Temperature ( C) seconds maximum 260 C First wave Second wave T < 50 C Cooling Preheating ca 2 C/second ca 3.5 C/second typical ca 5 C/second 5 C max Tpreheat 0 C Typical Time (s) The soldering iron tip temperature should be set at 350 C (+ C maximum) with the soldering duration not to exceed more than 3 seconds. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 20

21 Soldering Process cont'd Wave Soldering Recommendations cont'd. The table indicates the maximum set-up temperature of the soldering process Figure Dielectric Film Material Maximum Preheat Temperature Capacitor Pitch mm Capacitor Pitch = 5 mm Capacitor Pitch > 5 mm Maximum Peak Soldering Temperature Capacitor Pitch 5 mm Capacitor Pitch > 5 mm Polyester 30 C 30 C 30 C 270 C 270 C Polypropylene 0 C C 30 C 260 C 270 C Paper 30 C 30 C 40 C 270 C 270 C Polyphenylene Sulphide 50 C 50 C 60 C 270 C 270 C 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 60 C Polypropylene C Paper 60 C Polyphenylene Sulphide 60 C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 2

22 Construction Section Detailed Cross Section Molded Plastic Case Single-sided Metallized Polypropylene Film (Second Layer) Single-sided Metallized Polypropylene Film (First Layer) Molded Plastic Case Self-Extinguishing Resin Margin Margin Metal Contact Layer Metal Contact Layer Margin s Winding Scheme Single-sided Metallized Polypropylene Film Single-sided Metallized Polypropylene Film Section 3 Sections KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 22

23 Marking FRONT TOP Series Dielectric Code Manufacturing Date Code Tolerance Rated Voltage KEMET Electronics Corporation P.O. Box 5928 Greenville, SC F36_R75 4//208 23