Capacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:
|
|
- Alfred Wells
- 6 years ago
- Views:
Transcription
1 WIMA FKP 1 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts, ouble-sided Metallization and Self-Healing Internal Series Connection for Highest Current Carrying Capability PCM 1 mm to 37. mm Special Features Extremely high pulse duty Self-healing Internal series connection ery low dissipation factor Negative capacitance change versus temperature According to RoHS 00/9/EC Typical Applications For high pulse and high frequency applications e.g. Switch mode power supplies Converters in drives and power electronics eflection systems in monitors and T-sets Electronic ballasts Construction ielectric: Polypropylene (PP) film Capacitor electrodes: Aluminium foil and double-sided metallized plastic film Internal construction: Plastic film Metal foil electrode Electrode carrier plastic film metallized on both sides Metal contact layer (schoopage) Terminating wire Encapsulation: Solvent-resistant, flame-retardant plastic case with epoxy resin seal, UL 94-0 Terminations: Tinned wire. Marking: Colour: Red. Marking: Black. Epoxy resin seal: Yellow Electrical ata range: 100 pf to 0. mf (E1-values on request) Rated voltages: 400 C, 630 C, 1000 C, 10 C, 1600 C, 000 C, 4000 C, 6000 C tolerances: ±0%, ±10%, ±% (other tolerances are available subject to special enquiry) Operating temperature range: + C to C Climatic test category: /100/6 in accordance with IEC Insulation resistance at +0+ C: C T 0.1 mf: 1 x 10 M (mean value: x 10 M ) C 0.1 mf: sec (M x mf) (mean value: sec) Measuring voltage: 100 /1 min. Test voltage: U r, sec / 6 k: 1.6 U r, sec. Maximum pulse rise time: issipation factors at +0+ C: tan d at f C 0.1 mf 0.1 mf P C 0. mf 1 k 3 x x k 4 x x k 10 x 10-4 ielectric absorption: 0.0 % oltage derating: A voltage derating factor of 1.3 % per K must be applied from +8+ C for C voltages and from +7+ C for AC voltages Reliability: Operational life hours Failure rate 1 fit (0. x U r and 40+ C) max. pulse rise time /msec at T A < 40) C pf/mf 400 C 630 C 1000 C 10 C 1600 C 000 C 4000 C 6000 C for pulses equal to the rated voltage Mechanical Tests Pull test on leads: d T 0.8 l: 10 N in direction of leads d > 0.8 l: 0 N in direction of leads according to IEC ibration: 6 hours at and 0.7 mm displacement amplitude or 10 g in accordance with IEC Low air density: 1kPa = 10 mbar in accordance with IEC Bump test: 4000 bumps at 390 m/sec in accordance with IEC Packing Available taped and reeled up to and including case size 1 x 6 x 31. / PCM 7. mm. etailed taping information and graphs at the end of the catalogue. For further details and graphs please refer to Technical Information. 81
2 WIMA FKP 1 Continuation General ata 400 C/0 AC* 630 C/400 AC* W H L PCM** Part number W H L PCM** Part number FKP1G011004B FKP1J011004B FKP1G01104B FKP1J01104B FKP1G0104B FKP1J0104B FKP1G013304B FKP1J013304B FKP1G014704B FKP1J014704B FKP1G016804B FKP1J016804C mf FKP1G01004B FKP1J FKP1J0100A FKP1G0104C FKP1J0104F FKP1J010B FKP1G FKP1J FKP1G00A FKP1G03304F FKP1J0330F FKP1G0330B FKP1G FKP1J0470H FKP1J04706A FKP1G0680F FKP1J06806B FKP1J06807A mf FKP1G03100H FKP1J FKP1G031006A FKP1J031007B FKP1G03106B FKP1J03107C FKP1G FKP1J C/600 AC* 10 C/600 AC* W H L PCM** Part number W H L PCM** Part number FKP1O111004B FKP1R011004B FKP1O11104B FKP1R01104B FKP1O1104B FKP1R0104B FKP1O113304B FKP1R013304C FKP1O114704C FKP1R FKP1O FKP1R016804F FKP1R01680A mf FKP1O11004F FKP1R FKP1O1100B FKP1O110B FKP1R010F FKP1O10F FKP1R00H FKP1O1330H FKP1R03306B FKP1O13306A FKP1R03307A FKP1O14706B FKP1R FKP1R04707B FKP1O FKP1R06807B FKP1O16807B mf FKP1O131007C FKP1R FKP1O FKP1R03107E FKP1O1307F FKP1R0307F00 * AC voltage: f T 1000 ; 1.4 x U rms + UC T U r ** PCM = Printed circuit module = lead spacing ims. in mm. Ionisation inception level in isolated cases may be lower than admissible rated AC voltage. Rights reserved to amend design data without prior notification. l d PCM W d H L PCM at the lead exit points ( 0.4) Part number completion: Tolerance: 0 % = M 10 % = K % = J Packing: bulk = S Lead length: 6- = S Taped version see page Continuation page 83
3 WIMA FKP 1 Continuation General ata 1600 C/60 AC* 000 C/700 AC* W H L PCM** Part number W H L PCM** Part number 100 pf FKP1T001004B FKP1U001004B FKP1T00104B FKP1U00104B FKP1T0004B FKP1U0004B FKP1T003304B FKP1U003304C FKP1T004704B FKP1U004704C FKP1T006804B FKP1U006804C FKP1T011004C FKP1U FKP1T01100A FKP1U01100A FKP1T FKP1U0110B FKP1T0110A FKP1T0104F FKP1U FKP1T010A FKP1T01330B FKP1U FKP1T FKP1U01470F FKP1T01680F FKP1U01680H mf FKP1T0100H FKP1U01006B FKP1T0106B FKP1U FKP1T006B FKP1U006F FKP1U007C FKP1T FKP1U03307C FKP1T03307C FKP1T04707C FKP1U04707E FKP1T FKP1U06807F mf FKP1T031007E C/700 AC* 6000 C/700 AC* W H L PCM** Part number W H L PCM** Part number 470 pf FKP1X00470A FKP1Y00470A FKP1X00680A FKP1Y00680A FKP1X01100A FKP1Y01100A FKP1X FKP1Y FKP1X010F FKP1Y010H FKP1X01330H FKP1Y01330H FKP1X014706B FKP1Y014706B FKP1X FKP1Y mf FKP1X01006F FKP1Y01006F FKP1X0107C FKP1Y0107C FKP1X007E FKP1Y007E00 * AC voltage: f T 1000 ; 1.4 x U rms + UC T U r ** PCM = Printed circuit module = lead spacing ims. in mm. Ionisation inception level in isolated cases may be lower than admissible rated AC voltage. Part number completion: Tolerance: 0 % = M 10 % = K % = J Packing: bulk = S Lead length: 6- = S Taped version see page 140. Rights reserved to amend design data without prior notification. Continuation page 84 83
4 WIMA FKP 1 Continuation Permissible AC voltage in relation to frequency at 10) C internal temperature rise (general guide) C 0.0 µf 00 pf 0. µf f C 00 pf 0.0 µf 0. µf f C 00 pf 0. µf 0.0 µf f 106 U rms C 0.0 µf 0. µf 00 pf f C 000 C 4000 C 6000 C 0.0 µf pf 00 pf f pf 470 pf 0.0 µf µf 100 pf 0 pf f
5 Recommendation for Processing and Application of Through-Hole Capacitors Soldering Process A preheating of through-hole WIMA capacitors is allowed for temperatures T max P 100 C. In practice a preheating duration of t P min. has been proven to be best. Single wave soldering Soldering bath temperature: T P 60 C Immersion time: t P sec ouble wave soldering Soldering bath temperature: T P 60 C Immersion time: x t P 3 sec ue to different soldering processes and heat requirements the graphs are to be regarded as a recommendation only. Wave soldering T [ C] see detailenlargement 10 s s 3 s [ sec] Typical temperature/time graph for double wave soldering t WIMA Quality and Environmental Philosophy ISO 9001:000 Certification ISO 9001:000 is an international basic standard of quality assurance systems for all branches of industry. The approval according to ISO 9001:000 of our factories by the E inspectorate certifies that organisation, equipment and monitoring of quality assurance in our factories correspond to internationally recognized standards. WIMA WPCS The WIMA Process Control System (WPCS) is a quality surveillance and optimization system developed by WIMA. WPCS is a major part of the quality-oriented WIMA production. Points of application of WPCS during production process: incoming material inspection metallization film inspection schoopage pre-healing lead attachment cast resin preparation/ encapsulation 100% final inspection AQL check WIMA Environmental Policy All WIMA capacitors, irrespective of whether through-hole devices or SM, are made of environmentally friendly materials. Neither during manufacture nor in the product itself any toxic substances are used, e.g. Lead PBB/PBE PCB Arsenic CFC Cadmium Hydrocarbon chloride Mercury Chromium 6+ etc. We merely use pure, recyclable materials for packing our components, such as: carton cardboard adhesive tape made of paper polystyrene We almost completely refrain from using packing materials such as: foamed polystyrene (Styropor ) adhesive tapes made of plastic metal clips RoHS Compliance According to the RoHS irective 00/9/EC certain hazardous substances like e.g. lead, cadmium, mercury must not be used any longer in electronic equipment as of July 1st, 006. For the sake of the environment WIMA has refraind from using such substances since years already. Tape for lead-free WIMA capacitors IN EN ISO 14001:00 WIMA s environmental management has been established in accordance with the guidelines of IN EN ISO 14001:00. The certification has been granted in June
6 P P P 1 H1 P 1 H t Typical imensions for Taping Configuration P P h H1 P 1 W H W0 W1 iagram 1: PCM.//7.mm W 0 F d P 0 d d F P 0 P F P P 0 iagram : PCM 10/1 mm iagram 3: PCM. and 7.*mm *PCM 7. taping possible with two feed holes between components imensions for Radial Taping esignation Symbol PCM. taping PCM taping PCM 7. taping PCM 10 taping* PCM 1 taping* PCM. taping PCM 7. taping Carrier tape width W 18.0 p p p p p p p0. Hold-down tape width W for hot-sealing 6.0 for hot-sealing 1.0 for hot-sealing 1.0 for hot-sealing 1.0 for hot-sealing 1.0 for hot-sealing for hot-sealing 1.0 adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape Hole position W p p p p p p p0. Hold-down tape position W 0. to 3.0 max. 0. to 3.0 max. 0. to 3.0 max. 0. to 3.0 max. 0. to 3.0 max. 0. to 3.0 max. 0. to 3.0 max. Feed hole diameter p p p p p p p0. Pitch of component P 1.7 p p p1.0.4 p1.0.4 p p1. 3 * 8.1 p1. or 0.8 p1. cumulative pitch cumulative pitch cumulative pitch cumulative pitch cumulative pitch cumulative pitch cumulative pitch Feed hole pitch P p0.3 error max. 1.7 p0.3 error max. 1.7 p0.3 error max. 1.7 p0.3 error max. 1.7 p0.3 error max. 1.7 p0.3 error max. 1.7 p0.3 error max. 1.0 mm/0 pitch 1.0 mm/0 pitch 1.0 mm/0 pitch 1.0 mm/0 pitch 1.0 mm/0 pitch 1.0 mm/0 pitch 1.0 mm/0 pitch Feed hole centre to lead Hole centre to component centre P 1.1 p p0.7.6 p p0.7. p p0.7.3 p0.7 P 6.3 p p p p p p p1.3 Feed hole centre to bottom 16. p p p p p p p0. H edge of the component 18. p p p p p p p0. Feed hole centre to top H+H H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 edge of the component 1 3. max. 3. max. 4. to to to to to 4.0 Lead spacing at F. p p p0.8 1 p0.8. p p0.8 upper edge of carrier tape 0. Lead diameter d 0.4 p p p0.0 or ,06 0. p0.0 or , , Component alignment h p.0 max. p.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max. Total tape thickness t 0.7 p p p p p p p0. Package (see also page 141) ROLL/AMMO Unit see details page 143. ims in mm. iameter of leads see General ata. REEL P 360 max. p depending on P 30 p1 B 8 p comp. dimensions * PCM 10 and PCM 1 can be crimped to PCM 7.. Position of components according to PCM 7. (sketch 1). P 0 = 1.7 or 1.0 is possible P 360 max. REEL B P 30 p1 AMMO p 4 p depending P 00 max. 8 p or REEL B 60 p on PCM and P p1 66 p 68 p component dimensions Please clarify customer-specific deviations with the manufacturer. 140
7 Packing Quantities for Bulk Capacitors and TPS* 14 PCM Size pcs. per packaging unit bulk pcs. per packaging unit/tps* Mini Standard Maxi Mini Standard Part number codes W H L M S G X Y mm mm mm mm mm mm mm mm Rights reserved to amend design data without prior notification. Moulded versions. * Tray-Packing-System Samples and pre-production needs on request.
8 Packing Units for Taped Capacitors with Radial Leads ROLL REEL AMMO PCM Size P 360 P x x 370 H16. H18. H16. H18. H16. H18. H16. H18. H16. H18. Part number codes W H L N O F I H J A C B mm mm 7. mm 10 mm 1 mm. mm 7. mm /340* /80* * for -inch transport pitches. Moulded versions. Rights reserved to amend design data without prior notification. Samples and pre-production needs 1 packing unit minimum. 143
9 WIMA Part Number System A WIMA part number consists of 18 digits and is composed as follows: Field 1-4: Type description Field - 6: Rated voltage Field 7-10: Field 11-1: Size and PCM Field 13-14: Special features (e.g. Snubber versions) Field 1: tolerance Field 16: Packing Field 17-18: Lead length (untaped) M K S C A 0 0 M S S MKS 63 C 0.01 mf. x 6. x % bulk 6 - Type description: Rated voltage: : Size: Tolerance: SM-PET = SMT 16 C = A0 pf = x 3.3 x 3 Size 181 = X1 0 % = M SM-PEN = SMN. C = A1 47 pf = x.1 x 3. Size 0 = Y1 10 % = K SM-PPS = SMI 4 C = A 100 pf = x 6.1 x 3 Size 84 = T1 % = J FKP 0 = FKS0 14 C = A3 0 pf = 00. x 7 x 4.6 PCM. = 0B. % = H MKS 0 = MKS0 8 C = A4 470 pf = x 7. x 4.6 PCM. = 0C 1 % = E FKS = FKS 40 C = A = x 6. x 7. PCM = 1A... FKM = FKM 0 C = B0 00 pf = 10 3 x 7. x 7. PCM = 1B FKP = FKP 63 C = C0 = x 7 x 10 PCM 7. = A MKS = MKS 100 C = mf = x 8. x 10 PCM 7. = B Packing: MKP = MKP 160 C = E0 0.0 mf = 0 3 x 9 x 13 PCM 10 = 3A AMMO H x 340 = A MKI = MKI 0 C = F mf = x 9 x 13 PCM 10 = 3B AMMO H x 370 = B FKS 3 = FKS3 400 C = G0 0.1 mf = 3100 x 11 x 18 PCM 1 = 4A AMMO H x 340 = C FKM 3 = FKM3 630 C = J0 0. mf = 30 6 x 1. x 18 PCM 1 = 4B AMMO H x 370 = FKP 3 = FKP3 800 C = L mf = 3470 x 14 x 6. PCM. = A REEL H = F MKS 4 = MKS4 80 C = M0 1 mf = x 1 x 6. PCM. = B REEL H = H MKM 4 = MKM C = O1. mf = 40 9 x 19 x 31. PCM 7. = 6A REEL H = I MKP 4 = MKP4 100 C = Q0 4.7 mf = x1 x 31. PCM 7. = 6B REEL H = J MKP 10 = MKP C = T0 10 mf = x 19 x 41. PCM 37. = 7A ROLL H16. = N FKP 4 = FKP4 000 C = U0 mf = 0 11 x x 41. PCM 37. = 7B ROLL H18. = O FKP 1 = FKP1 00 C = 0 47 mf = x 49 x 18 CH_ = H0 BLISTER W1 180 = P MKP-X = MKX 4000 C = X0 100 mf = x 77 x 18 CH_ = H1 BLISTER W1 180 = Q MKP-X R = MKXR 6000 C = Y0 0 mf = BLISTER W1 180 = R MKP-Y = MKY 0 AC = 0W 1 F = A010 BLISTER W1 180 = T MP 3-X = MPX 7 AC = 1W. F = A0 Bulk Mini = M MP 3-X1 = MPX1 300 AC = W 0 F = A00 Special features: Bulk Standard = S MP 3-Y = MPY 400 AC = 3W 100 F = B100 Standard = 00 Bulk Maxi = G MP 3R-Y = MPYR 440 AC = 4W 600 F = B600 ersion A1 = 1A TPS Mini = X Snubber FKP = SNFP 00 AC = W 100 F = C10 ersion A1.1 = 1B TPS Standard = Y Snubber MKP = SNMP GTO MKP = GTOM C-LINK MKP 4 = CP4 C-LINK MKP C = CPC Lead length (untaped) C-LINK HC = CH_ 3. ±0. = C9 SuperCap C = SCSC 6 - = S SuperCap MC = SCMC 16-1 = P4 SuperCap R = SCSR... SuperCap MR = SCMR The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the pages of the respective WIMA range. 138
Capacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:
WIMA FKP 1 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts, ouble-sided Metallization and Self-Healing Internal Series Connection for Highest Current
More informationWIMA FKP 4. Typical Applications. Construction. Packing. Mechanical Tests
WIMA FKP 4 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts and Self-Healing, Internal Series Connection for Increased Current Carrying Capability PCM
More informationWIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus
More informationWIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus
More informationWIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus
More information100 khz 4 x x MHz 10 x Mechanical Tests
WIMA FKP 2 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM mm Special Features Pulse duty construction Close tolerances up to ±2. % (±1 % on request) Very low dissipation factor
More informationWIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus
More informationWIMA MP 3-Y2. Metallized Paper (MP) RFI-Capacitors Class Y2 PCM 10 mm and 15 mm. Typical Applications. Construction. Packing.
WIMA MP 3-Y2 Metallized Paper (MP) RFI-Capacitors Class Y2 PCM 10 mm and 15 mm Special Features Particularly high reliability against active and passive flammability Excellent self-healing as well as high
More informationWIMA FKS 2. Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm. Typical Applications. Construction. Mechanical Tests.
WIMA FKS 2 Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm Special Features Pulse duty construction According to RoHS 2011/65/EU Typical Applications For general C-applications
More informationWIMA MKP 4. Metallized Polypropylene (PP) Capacitors PCM 7.5 mm to 37.5 mm. Typical Applications. Construction. Packing.
WIMA MKP 4 Metallized Polypropylene (PP) Capacitors PCM 7.5 mm to 37.5 mm Special Features High volume/capacitance ratio Self-healing Very low dissipation factor Negative capacitance change versus temperature
More informationWIMA FKP 02. Typical Applications. Construction. Packing. Mechanical Tests
WIMA FKP 02 Polypropylene (PP) Film/Foil Capacitors for Pulse Applications in PCM 2.5 mm. Capacitances from 100 pf to 0.01 mf. Rated Voltages from 63 VC to 400 VC. Special Features Pulse duty construction
More informationCountry Authority Specification. Germany VDE IEC USA/Canada UL UL CAN/CSA-E Mechanical Tests
WIMA MP 3-Y2 / 3R-Y2 Metallized Paper (MP) RFI-Capacitors Class Y2 in PCM 10 mm to 27.5 mm. Capacitances from 1000 pf to 0.1 mf. Rated Voltages 250 VAC and 300 VAC. Special Features Particularly high reliability
More informationWIMA MKS 2. Metallized Polyester (PET) Capacitors in PCM 5 mm. Typical Applications. Construction. Packing. Mechanical Tests
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications e.g.
More information300 VAC* W H L PCM** Part number 1000 pf MKY22W11003D MKY22W11503D MKY22W12203D00
WIMA MKP-Y2 Metallized Polypropylene (PP) RFI-Capacitors Class Y2 in PCM 10 mm to 37.5 mm. Capacitances from 1000 pf to 1.0 mf. Rated Voltage 300 VAC. Special Features Reliable self-healing High degree
More informationWIMA MKS 2. Metallized Polyester (PET) Capacitors in PCM 5 mm. Typical Applications. Construction. Packing. Mechanical Tests
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications e.g.
More informationWIMA FKP 2. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM 5 mm. Typical Applications. Construction.
WIMA FKP 2 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM mm Special Features Pulse duty construction Close tolerances up to ±2. % (±1 % on request) Very low dissipation factor
More informationCapacitance range: 1000 pf to 10 mf (E12-values on request) Rated voltages: 16 VDC 50 VDC 63 VDC 100 VDC 250 VDC 400 VDC 630 VDC
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications e.g.
More informationWIMA FKM 2. Film and Foil Capacitors with Mixed Dielectric for Pulse Applications in PCM 5 mm. Typical Applications. Construction.
WIMA FKM 2 Film an Foil Capacitors with Mixe ielectric for Pulse Applications in PCM 5 mm Special Features Pulse uty construction Constant capacitance value versus temperature (similar to the obsolete
More information0.01 mf MKX2AW21002C MKX2AW21003F MKX2AW21502C MKX2AW21503F00
WIMA MKP-X2 Metallized Polypropylene (PP) RFI-Capacitors Class X2 in PCM 7.5 mm to 37.5 mm. Capacitances from 1000 pf to 10 mf. Rated Voltage 305 VAC. Special Features Reliable self-healing High degree
More informationWIMA FKS 2. Typical Applications. Construction. Mechanical Tests. Packing
WIMA FKS 2 Polyester (PET) Film/Foil Capacitors for Pulse Applications in PCM 5 mm. Capacitances from 1000 pf to 0.047 mf. Rated Voltages from 63 VC to 630 VC. Special Features Pulse duty construction
More informationWIMA FKP 2. Typical Applications. Construction. Mechanical Tests. Packing
WIMA FKP 2 Polypropylene (PP) Film/Foil Capacitors for Pulse Applications in PCM mm. Capacitances from 33 pf to 0.033 mf. Rated Voltages from 63 VC to 1000 VC. Special Features Pulse duty construction
More informationWIMA FKP 3. Typical Applications. Construction. Packing. Mechanical Tests
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM 7.5 mm to 15 mm. Capacitances from 100 pf to 0.22 mf. Rated Voltages from 63 VC to 1000 VC. Special Features Pulse duty
More informationWIMA FKP 4. Typical Applications. Construction. Packing. Mechanical Tests
WIMA K 4 olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts an Self-ealing, Internal Series Connection for Increase Current Carrying Capability CM 1 mm to 37.
More informationWIMA FKS 3. Polyester (PET) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKS 3 Polyester (PET) Film an Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse uty construction Accoring to RoS 2002/95/EC Typical Applications For general C-applications
More informationCapacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:
olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts, ouble-sie Metallization an Self-ealing Internal Series Connection for ighest Current Carrying Capability 1
More informationWIMA FKS 2. Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm. Typical Applications. Construction. Packing.
WIMA FKS 2 Polyester (PET) Film an Foil Capacitors for Pulse Applications in PCM 5 mm Special Features Pulse uty construction Accoring to RoS 2002/95/EC Typical Applications For general C-applications
More information50 VDC 10 V 63 VDC 50 V. 1 x 10 4 M (mean value: 2 x 10 4 M ) Measuring time: 1 min. Test voltage: 1.6 U r, 2 sec. Maximum pulse rise time:
WIMA MKS 02 Metallize Polyester (PET) Capacitors in PCM 2.5 mm Special Features igh volume/capacitance ratio an reuce base PCM 2.5 mm Self-healing Accoring to RoS 2002/95/EC Typical Applications For general
More informationWIMA DC-LINK MKP 4. Metallized Polypropylene (PP) - Capacitors for DC-Link Applications. Typical Applications. Construction.
WIM C-LINK MKP 4 Metallized Polypropylene (PP) - Capacitors for C-Link pplications Special Features Capacitances up to 150 mf High volume/capacitance ratio Excellent self-healing properties Very low dissipation
More informationCapacitance. Mechanical Tests
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2011/65/EU Typical Applications For general C-applications e.g.
More informationCapacitance range: mf to 25 mf Rated voltages: 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC
WIMA Snubber MKP Snubber MKP Capacitors for Pulse Applications with ouble-sided Metallized Electrodes, Schoopage Contacts and Internal Series Connection Special Features Pulse duty construction Self-healing
More informationWIMA MKP-X2. Continuation. General Data
WIMA MKP-X2 Metallize Polypropylene (PP) RFI-Capacitors Class X2 PCM 7.5 mm to 27.5 mm Special Features Reliable self-healing igh egree of interference suppression ue to goo attenuation an low ESR Accoring
More informationCountry Authority Specification Symbol. Mounting Recommendation
WIMA MP 3-X2 Metallize Paper (MP) RFI-Capacitors Class X2 PCM 10 mm to 27.5 mm Special Features Particularly high reliability against active an passive flammability Excellent self-healing as well as high
More informationWIMA MKS 2. Metallized Polyester (PET) Capacitors in PCM 5 mm. Capacitances from 0.01 mf to 10 mf. Rated Voltages from 50 VDC to 630 VDC.
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm. Capacitances from 0.01 mf to 10 mf. Rated Voltages from 50 VC to 630 VC. Special Features High volume/capacitance ratio Self-healing AEC-Q200
More informationCapacitance range: 1000 pf to 10 mf (E12-values on request) Rated voltages: 100 VDC 250 VDC 400 VDC 630 VDC 850 VDC 1000 VDC 1600 VDC 2000 VDC
WIMA MKP 4 Metallized Polypropylene (PP) Capacitors in PCM 7.5 mm to 37.5 mm. Capacitances from 1000 pf to 10 mf. Rated Voltages from 100 VC to 2000 VC. Special Features High volume/capacitance ratio Self-healing
More informationWIMA MKS 4. Metallized Polyester (PET) Capacitors PCM 7.5 mm to 37.5 mm. Typical Applications. Construction. Packing.
Metallized Polyester (PET) Capacitors PCM 7.5 mm to 37.5 mm Special Features Electrical ata High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications
More informationMetallized Polypropylene (PP) - Capacitors for DC-Link Applications. Capacitances from 1.0 mf to 400 mf. Rated Voltages from 400 VDC to 1300 VDC.
WIM C-LINK MKP 4 Metallized Polypropylene (PP) - Capacitors for C-Link pplications. Capacitances from 1.0 mf to 400 mf. Rated Voltages from 400 VC to 1300 VC. Special Features Capacitances up to 400 mf
More informationWIMA MKS 4. Typical Applications. Construction. Mechanical Tests. Packing. High volume/capacitance ratio Self-healing According to RoHS 2011/65/EU
WIMA MKS 4 Metallized Polyester (PET) Capacitors in PCM 7.5 mm to 52.5 mm. Capacitances from 1000 pf to 680 mf. Rated Voltages from 50 VC to 2000 VC. Special Features Electrical ata High volume/capacitance
More informationMetallized Polypropylene Film Capacitors (MKP)
Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: July 2015 B32656S... B32658S EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures
More informationCeramic disc capacitors (kinked leads) Class 2, low loss (0.2% max.) 500 V; 1 kv; 2 kv; 3 kv
FEATURES High reliability Low losses High capacitance in small size Kinked leads. APPLICATIONS In electronic circuits where low losses and high capacitance per volume are essential, for example: SMPS HF
More informationEMI Suppression Capacitors
Construction Plastic case (UL 94 V-0) Epoxy resin sealing, flame-retardant Axial leads, insulating sleeve (type B8119 Self-healing Smallest possible dimensions Terminals Parallel wire leads, tinned Two
More informationR82. p = 5mm. MKT Series R 8 2 C -
Loose All dimensions are in mm. Taped R82 Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. p = 5mm B
More informationRated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
More informationFilm Capacitors. Metallized Polyester Film Capacitors (MKT) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32591... B32594 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto
More informationMSB Metallized polyester film capacitor MKT - High performance
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor run applications. Low power switching applications. Low pulse operation
More information1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
More informationPolypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 Series is constructed of metallized polypropylene
More informationPHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS CONSTRUCTION L B Pulse operation in SMPS, TV, monitor, electrical ballast and
More informationAccording to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency
More informationFilm Capacitors. Metallized Polyester Film Capacitors (MKT-S) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT-S) Series/Type: B32537 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
More informationCommon to almost all eco-friendly lighting.
A series on topics of relevance and advances from the Technical Centre, Deki Electronics Ltd, India February 2012 Common to almost all eco-friendly lighting. RoHS compliant film capacitors from Deki. www.dekielectronics.com
More informationMetallized Polypropylene Film Capacitor DC-Link capacitor
Metallized Polypropylene Film Capacitor DC-Link capacitor APPLICATIONS Industrial and high-end power supplies High performance DC filtering Frequency converters Solar inverters Renewable energies inverters
More informationApplications R71 M F 2100 AA 00 J
Polypropylene Pulse/High Frequency Capacitors R71 Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Overview The R71 is constructed of metallized polypropylene film with radial leads
More informationPrinted Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G capacitor is a polypropylene metallized film capacitor with a polyester tape wrapping filled with resin, and uses tinned
More informationPrinted Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical
More informationWF12SR360JTL. Size Surge 5% chip resistors. Customer : Approval No : Issue Date : Customer Approval :
SPECIFICATION OF SURGE 5% CHIP RESISTOR Ver: 1 Page: 1 of 7 ROHS compliance WF12SR360JTL Surge 5% chip resistors Size 1206 Customer : Approval No : Issue Date : Customer Approval : SPECIFICATION OF SURGE
More informationPrinted Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical
More informationNTC thermistors, high-temperature sensors /7/8...
FEATURES Small diameter Quick response to temperature change High stability over a long life Wide temperature range from 40 to +300 C Resistant to corrosive atmospheres and harsh environments. APPLICATION
More informationCMK Metallized polycarbonate CECC approval, detail specification According to CECC 30500, IEC 384-6
Metallized polycarbonate CECC approval, detail specification 30501-020 According to CECC 30500, IEC 384-6 TYPICAL APPLICATIONS Automotive and other applications in high ambient temperatures. Stable filters,
More informationMAB - (Updated approval references)
Main applications Motor run capacitor, general purpose AC applications, medium-low power switching capacitor for industrial and motor speed controls, electronic ballasts and SMPS Dielectric Polypropylene
More informationAC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type
www.vishay.com AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES Low loss dielectric Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationApplications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor
More informationMTB. MKT box with radial terminals small size general purpose. Ed. 04 Rev Dissipation factor (DF), max. tgδ x10-4, measured at 25 ±5 C
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low pulse operation Dielectric Polyester Electrodes Vacuum
More informationTHIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Features... 2 Applications... 2 Approvals... 2 Part Marking... 3 System... 4 Absolute Ratings... 4 Fuse Configuration and Dimensions... 5 Specifications...
More informationPPS. MKP axial terminals snubber medium-high pulse applications high current high frequency switching. Ed. 04 Rev
Main applications Snubber, energy conversion and control in power semiconductor circuits, industrial and motor speed controls, SMPS, induction heaters, high voltage, high current and medium-high pulse
More informationFailure quota 300/10 9 component hours. Warning: this specification must be completed with the data given in the General technical information chapter
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
More informationConfiguration. Specification: Capacitance Range. Insulation Resistance. Maximum Pulse Rise Time(V/μsec.): Shown As Following Table.
Metallized Polyester Film s (Radial Dipped) Configuration FEATURES Self healing characteristics. Miniature size, light in weight. High stability of temperature vs. Cap. and tanδ. High density thermosetting
More informationCGA Series Automotive Grade Capacitors
CGA Series Automotive Grade Capacitors Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before
More informationResin-Coated, Radial-Leaded Solid Tantalum Capacitors
FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*
More informationApplications C87 8 B F AA 4 J
C87, Cylindrical Aluminum Case, Overpressure Protection, 420 VAC/470 VAC Overview C87 is a polypropylene metallized film, with a cylindrical aluminium can-type construction filled with resin. It uses faston,
More informationMPPB Series. Metallized Polypropylene Film Capacitor Box type. Metallized Polypropylene Film Capacitor - Box type Features. Typical Applications
Metallized Polypropylene Film Capacitor - Box type Features Metallized polypropylene structure Low loss at high frequency Small inherent temperature rise Plastic case (UL94 V-0), Epoxy resin sealing RoHS
More informationPolypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Overview The R76 Series is constructed of polypropylene
More informationSR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512 ( Automotive & Anti-sulfuration ) Page 1 of 7 SR20-25X_V04 Sep.-2011 FEATURE 1. High reliability and stability ±1% 2. Sulfuration resistant 1000ppm
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
More informationPolyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
More informationWR10X ±1%, ±5% General purpose chip resistors Size 1210
WR10X ±1%, ±5% General purpose chip resistors Size 1210 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR10X Version 02 Jun.-2005 FEATURE 1. High reliability and stability 2. Reduced
More informationJuly terminal Filters. For Large-current Power Line. YFF-HC Series [1206 inch]* Feed through filter. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 215 3-terminal Filters For Large-current Power Line YFF31HC 3216 [126 inch]* Feed through filter * Dimensions Code JIS[EIA] (1/4) 3-terminal Filters For Large-current Power
More information1.0 Rated Values and Operational Data
Applications Protection and Commutation Power Electronics Impulsional devices with intensive / High Current Switching Power Supplies Main Characteristics Dry film-foil technology Nominal Voltage: 630 VDC
More informationPSB / RSB - (Expanded range)
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, resonant circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and
More informationApplications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T
MDS, Dual In-Line Low Profile, 50 630, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor is encapsulated in a self-extinguishing material, meeting the requirements of UL
More information1 8 WK L_V_AUTO_V01 FEB
WK12L, WK20L, WK25L 1%, 5% Thick Film Power Chip Resistor Wide Termination RoHS compliant and Halogen free Size 0612, 1020, 1225 Automotive AEC Q200 Compliant ASTM B-809-95 Compliant *Contents in this
More informationApplications R46 K I M
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V 0. Applications For worldwide
More informationWF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10H_V01 Jan.2010 FEATURE 1. High reliability and stability
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
More informationGeneral Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, VDC.
General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, 50 630 VDC Overview Dual in-line (DIL) metallized polyester (PET) film capacitor. Encapsulation
More informationmm. Film dielectric trimmers QUICK REFERENCE DATA
5 mm FEATURES Housing diameter 5 mm Top and bottom or top adjustment Round or hexagonal head Vertical version. APPLICATIONS For consumer and industrial equipment. DESCRIPTION The vanes of the trimmer are
More information100V 160V 200V 250V 400V
CL12 Polyester Film Capacitors Structures: Polypropylene film, non- inductive, phenolic resin coating Features: Excellent frequency and temperature characteristics, Very small loss even at high frequency.
More informationVAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
More informationTHZ NEW - In Progress
Main applications AC power applications, input-output AC filtering, harsh environment applications Dielectric Polypropylene Electrodes Vacuum deposited metal layers Coating Solvent resistant plastic case
More informationWW12W ±1%, ±5% Size W. Thick Film High Power Low Ohm Chip Resistors. Approval sheet
±1%, ±5% Thick Film High Power Low Ohm Chip Resistors Size 1206 1W *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC 1W TC200_V01 DEC - 2015 FEATURE 1. High power rating
More informationContact: Customer Service Phone: Fax: esales.electrocube.com Website:
Supplier: Electrocube, Inc., 3366 Pomona Blvd., Pomona, California 91768 Contact: Customer Service Phone: 909-595-4037 Fax: 909-595-0186 Email: esales..com Website: www..com Date: 01/02/13 Quality Assurance
More informationC Series Mid Voltage Application
C Series Mid Application Type: C1005 [EIA CC0402] C1608 [EIA CC0603] C2012 [EIA CC0805] C3216 [EIA CC1206] C3225 [EIA CC1210] C4532 [EIA CC1812] C5750 [EIA CC2220] Issue date: April 2011 TDK MLCC US Catalog
More informationØ 5 mm Film Dielectric Trimmers
Ø 5 mm Film Dielectric Trimmers FEATURES Housing diameter 5 mm Top and bottom or top adjustment Round head Mounting: radial Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationMHBS (MHB version S) NEW in progress
Main applications Switching capacitor for industrial and motor speed controls, DClink, SMPS, induction heaters, suitable for AC applications Main characteristics High voltage and high capacitance in small
More informationApplications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T
Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications
More informationCCDSeries FEATURES ORDERING CODE CCD B 101 K H 7 2 (1) (2) (3) (4) (5) (6) (7) (8) (9) Safety Standard Recognized Ceramic Capacitors
CCDSeries Safety Standard Recognized Ceramic s Configuration FEATURES Complying with IEC60384-14 4 th Edition Class X1Y1 and Class X1Y2 Dielectric Strength: AC2600V (r.m.s) for X1Y2 and AC4000V (r.m.s)
More informationSize 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration )
SR12, SR10, SR08, SR06, SR04, General purpose chip resistors Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration ) *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_SR_V03
More informationWW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive)
WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive) *Contents in this sheet are subject to change without prior notice. Page
More informationWR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18-20-25X(W) Ver.13 Oct.-2010 FEATURE 1. High power
More informationWW25X ±1%, ±5% Low ohmic power chip resistors Size 2512
WW25X ±1%, ±5% Low ohmic power chip resistors Size 2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WW25X Version 06 Jul.-2004 FEATURE 1. High power rating and compact size 2.
More informationEnergy sector DC LINK CAPACITORS AND SNUBBERS
Energy sector DC LINK CAPACITORS AND SNUBBERS DC link APPLICATIONS Hybrid vehicles Wind plants Solar power plants Electric energy generation from sea waves Medical equipment Industrial equipment Car electronics
More information