WIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
|
|
- Sharlene Whitehead
- 5 years ago
- Views:
Transcription
1 WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus temperature Very low dielectric absorption According to RoHS 2002/95/EC Typical Applications For high frequency applications e.g. Sample and hold Timing LC-Filtering Oscillating circuits Audio equipment Construction ielectric: Polypropylene (PP) film Capacitor electrodes: Metal foil Internal construction: Electrical ata Capacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages: 63 VC, 100 VC, 250 VC, 400 VC, 630 VC, 1000 VC Capacitance tolerances: ±20%, ±10%, ±5% Operating temperature range: 55+ C to C Test specifications: In accordance with IEC and EN Climatic test category: 55/100/56 in accordance with IEC Insulation resistance at +20+ C: 5 x 10 5 M (mean value: 1 x 10 6 M ) Measuring voltage: U r = 63 V: U test = 50 V/1 min. U r 100 V: U test = 100 V/1 min. Test voltage: 2 U r, 2 sec. Maximum pulse rise time: 1000 V/msec for pulses equal to the rated voltage ielectric absorption: 0.05 % Temperature coefficient: 200 x 10-6 /+ C (general guide) issipation factors at +20+ C: tan d at f C 0.1 mf 0.1 mf P C 0.22 mf 1 khz 4 x x khz 5 x x khz 10 x 10-4 Voltage derating: A voltage derating factor of 1.35 % per K must be applied from +85+ C for C voltages and from +75+ C for AC voltages. Reliability: Operational life hours Failure rate 5 fit (0.5 x U r and 40+ C) Plastic film Metal foil electrode Terminating wire Encapsulation: Solvent-resistant, flame-retardant plastic case with epoxy resin seal, UL 94 V-0 Terminations: Tinned wire. Marking: Colour: Red. Marking: Black. Epoxy resin seal: Yellow Mechanical Tests Pull test on pins: 10 N in direction of pins according to IEC Vibration: 6 hours at Hz and 0.75 mm displacement amplitude or 10 g in accordance with IEC Low air density: 1kPa = 10 mbar in accordance with IEC Bump test: 4000 bumps at 390 m/sec 2 in accordance with IEC Packing Available taped and reeled. etailed taping information and graphs at the end of the catalogue. For further details and graphs please refer to Technical Information. 42
2 WIMA FKP 3 Continuation General ata Capacitance 63 VC/40 VAC* 100 VC/63 VAC* W H L PCM** Part number W H L PCM** Part number 100 pf FKP B FKP B FKP B FKP B FKP B FKP B pf FKP B FKP B FKP B FKP B FKP B FKP C mf FKP C FKP3C021502C FKP FKP3C FKP F FKP3C FKP G FKP3C024703F FKP B FKP3C026803G FKP C mf FKP3C031004C FKP FKP3C031504F FKP J FKP3C032204J00 Capacitance 250 VC/160 VAC* 400 VC/250 VAC* W H L PCM** Part number W H L PCM** Part number 100 pf FKP3F001002B FKP3G001002B FKP3F001502B FKP3G001502B FKP3F002202B FKP3G002202B FKP3F003302B FKP3G003302B FKP3F004702B FKP3G004702B FKP3F006802B FKP3G006802B pf FKP3F011002B FKP3G011002B FKP3F011502B FKP3G011502C FKP3F012202C FKP3G012202C FKP3G FKP3F013303A FKP3G FKP3F FKP3G014703F FKP3F016803F FKP3G016803G mf FKP3F021003F FKP3G021004B FKP3F021503G FKP3G021504C FKP3F021504B FKP3F022204C FKP3G FKP3F FKP3G023304F FKP3F024704F FKP3G024704J FKP3F026804J00 * AC voltage: f 1000 Hz; 1.4 x U rms + UC U r ** PCM = Printed circuit module = pin spacing ims. in mm. Rights reserved to amend design data without prior notification. Part number completion: Tolerance: Packing: Pin length: 20 % = M 10 % = K 5 % = J bulk = S 6-2 = S Taped version see page 127. Continuation page 44 43
3 WIMA FKP 3 Continuation General ata Capacitance 630 VC/300 VAC* 1000 VC/300 VAC* W H L PCM** Part number W H L PCM** Part number 100 pf FKP3J001002B FKP3O101002B FKP3J001502B FKP3O101502B FKP3J002202B FKP3O102202B FKP3J003302B FKP3O103302B FKP3J004702B FKP3O104702B FKP3J006802B FKP3O106802B pf FKP3J011002C FKP3O111002C FKP3J FKP3O FKP3J FKP3O FKP3J013303F FKP3O113303F FKP3J014703G FKP3O114703G FKP3J016804B FKP3O116804B mf FKP3J021004C FKP3O121004C FKP3J021504F FKP3O121504F FKP3J022204J FKP3O122204J FKP3J023304J00 * AC voltage: f 1000 Hz; 1.4 x U rms + UC U r ** PCM = Printed circuit module = pin spacing ims. in mm. W d = 0.5 P if W = 3 PCM 7.5 and 10 d = 0.6 P if W 4 d = 0.8 P if PCM = d H L PCM at the pin exit points ( ± 0.4) Part number completion: Tolerance: Packing: Pin length: 20 % = M 10 % = K 5 % = J bulk = S 6-2 = S Taped version see page 127. Rights reserved to amend design data without prior notification. Permissible AC voltage in relation to frequency at 10) C internal temperature rise (general guide). Urms V µf µf 4700 pf 100 VC 1000 pf 2200 pf 100 pf 220 pf 470 pf µf 0.15 µf 0.01 µf f 10 Hz 44
4 Recommendation for Processing and Application of Through-Hole Capacitors Soldering Process A preheating of through-hole WIMA capacitors is allowed for temperatures T max P 100 C. In practice a preheating duration of t P 5 min. has been proven to be best. Single wave soldering Soldering bath temperature: T P 260 C Immersion time: t P 5 sec ouble wave soldering Soldering bath temperature: T P 260 C Immersion time: 2 x t P 3 sec ue to different soldering processes and heat requirements the graphs are to be regarded as a recommendation only. Wave soldering T [ C] see detailenlargement 10 s 2 s 3 s [ sec] Typical temperature/time graph for double wave soldering t WIMA Quality and Environmental Philosophy ISO 9001:2008 Certification ISO 9001:2008 is an international basic standard of quality assurance systems for all branches of industry. The approval according to ISO 9001:2008 of our factories by the VE inspectorate certifies that organisation, equipment and monitoring of quality assurance in our factories correspond to internationally recognized standards. WIMA WPCS The WIMA Process Control System (WPCS) is a quality surveillance and optimization system developed by WIMA. WPCS is a major part of the quality-oriented WIMA production. Points of application of WPCS during production process: incoming material inspection metallization film inspection schoopage pre-healing pin attachment cast resin preparation/ encapsulation 100% final inspection AQL check WIMA Environmental Policy All WIMA capacitors, irrespective of whether through-hole devices or SM, are made of environmentally friendly materials. Neither during manufacture nor in the product itself any toxic substances are used, e.g. Lead PBB/PBE PCB Arsenic CFC Cadmium Hydrocarbon chloride Mercury Chromium 6+ etc. We merely use pure, recyclable materials for packing our components, such as: carton cardboard adhesive tape made of paper polystyrene We almost completely refrain from using packing materials such as: foamed polystyrene (Styropor ) adhesive tapes made of plastic metal clips RoHS Compliance According to the RoHS irective 2002/95/EC certain hazardous substances like e.g. lead, cadmium, mercury must not be used any longer in electronic equipment as of July 1st, For the sake of the environment WIMA has refraind from using such substances since years already. Tape for lead-free WIMA capacitors IN EN ISO 14001:2004 WIMA s environmental management has been established in accordance with the guidelines of IN EN ISO 14001:2004 to optimize the production processes with regard to energy and resources. 14
5 P P P 1 H1 P 1 H t Typical imensions for Taping Configuration P 2 P Vh H1 P 1 W2 H W0 W1 iagram 1: PCM 2.5/5/7.5mm W 0 F d P 0 d d F P 0 P 2 F P 2 P 0 iagram 2: PCM 10/15 mm iagram 3: PCM 22.5 and 27.5*mm *PCM 27.5 taping possible with two feed holes between components imensions for Radial Taping esignation Symbol PCM 2.5 taping PCM 5 taping PCM 7.5 taping PCM 10 taping* PCM 15 taping* PCM 22.5 taping PCM 27.5 taping Carrier tape width W 18.0 p p p p p p p0.5 Hold-down tape width W for hot-sealing 6.0 for hot-sealing 12.0 for hot-sealing 12.0 for hot-sealing 12.0 for hot-sealing 12.0 for hot-sealing for hot-sealing 12.0 adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape Hole position W p p p p p p p0.5 Hold-down tape position W to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. Feed hole diameter p p p p p p p0.2 Pitch of component P 12.7 p p p p p p1.5 3 * 8.1 p1.5 or 50.8 p1.5 cumulative pitch cumulative pitch cumulative pitch cumulative pitch cumulative pitch cumulative pitch cumulative pitch Feed hole pitch P p0.3 error max p0.3 error max p0.3 error max p0.3 error max p0.3 error max p0.3 error max p0.3 error max. 1.0 mm/20 pitch 1.0 mm/20 pitch 1.0 mm/20 pitch 1.0 mm/20 pitch 1.0 mm/20 pitch 1.0 mm/20 pitch 1.0 mm/20 pitch Feed hole centre to pin Hole centre to component centre P p p p p p p p0.7 P p p p p p p p1.3 Feed hole centre to bottom 16.5 p p p p p p p0.5 H edge of the component 18.5 p p p p p p p0.5 Feed hole centre to top H+H H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 edge of the component max max to to to to to 45.0 Pin spacing at F 2.5 p p p p p p0.8 upper edge of carrier tape 0.2 Pin diameter d 0.4 p p p0.05 or ,06 +0,08 +0, p0.05 or Component alignment h p 2.0 max. p 2.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max. Total tape thickness t 0.7 p p p p p p p0.2 Package (see also page 128) ROLL/AMMO Unit see details page 130. ims in mm. iameter of pins see General ata. REEL P 360 max. 52 p2 depending on P 30 p1 B 58 p2 comp. dimensions * PCM 10 and PCM 15 can be crimped to PCM 7.5. Position of components according to PCM 7.5 (sketch 1). P 0 = 12.7 or 15.0 is possible REEL P 360 max. B P 30 p1 AMMO 52 p2 54 p2 depending P 500 max. 58 p2 or REEL B 60 p2 on PCM and P 25 p1 66 p2 68 p2 component dimensions Please clarify customer-specific deviations with the manufacturer. 127
6 Packing Quantities for Capacitors with Radial Pins in PCM 2.5 mm to 22.5 mm PCM 2.5 mm 5 mm 7.5 mm 10 mm 15 mm 22.5 mm pcs. per packing unit Size ROLL REEL AMMO bulk P 360 P x x 370 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 W H L Codes S N O F I H J A C B B C E F A B C E F G H I J K L M N , A B C E F G A FA C FB F G H I B FC C F FE F FF H J FG M A B FH F FI 540* G 680* H 680* I 680* FJ 450* * Tray Packing-System Moulded versions. Rights reserved to amend design data without prior notification. Samples and pre-production needs on request
7 Packing Units Quantities for Taped for Capacitors with with Radial Radial Pins in Leads PCM 2.5 mm to 22.5 mm PCM 27.5 mm 37.5 mm 48.5 mm 52.5 mm pcs. per packing units Size ROLL REEL AMMO bulk P 360 P x x 370 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 W H L Codes S N O F I H J A C B A 640* 460/340* B 544* 380/280* * FK 336* F 384* FL 288* G 176* I 176* L 50* FM 216* J 144* A 480* B 408* C 252* * E 132* F 108* G 108* H 84* I 72* J 35* K 28* * E 72* H 60* J 48* L 25* F 25* H 20* J 20* * for 2-inchl transport pitches. Moulded versions. Rights reserved to amend design data without prior notification. * Tray Packing System Samples and pre-production needs on request
8 WIMA Part Number System A WIMA part number consists of 18 digits and is composed as follows: Field 1-4: Type description Field 5-6: Rated voltage Field 7-10: Capacitance Field 11-12: Size and PCM Field 13-14: Special features (e.g. Snubber versions) Field 15: Capacitance tolerance Field 16: Packing Field 17-18: Lead length (untaped) M K S 2 C A 0 0 M S S MKS 2 63 VC 0.01 mf 2.5 x 6.5 x % bulk 6-2 Type description: Rated voltage: Capacitance: Size: Tolerance: SM-PET = SMT 2.5 VC = A1 22 pf = x 3.3 x 3 Size 1812 = KA 20 % = M SM-PPS = SMI 4 VC = A2 47 pf = x 3.3 x 4 Size 1812 = KB 10 % = K FKP 02 = FKP0 14 VC = A3 100 pf = x 5.1 x 3.5 Size 2220 = QA 5 % = J MKS 02 = MKS0 28 VC = A4 150 pf = x 5.1 x 4.5 Size 2220 = QB 2.5 % = H FKS 2 = FKS2 40 VC = A5 220 pf = x 6.1 x 3 Size 2824 = TA 1 % = E FKP 2 = FKP2 5 VC = A6 330 pf = x 6.1 x 5 Size 2824 = TB... MKS 2 = MKS2 50 VC = B0 470 pf = x 7.6 x 5 Size 4030 = VA MKP 2 = MKP2 63 VC = C0 680 pf = x 10.2 x 6 Size 5040 = XA FKS 3 = FKS3 100 VC = pf = x 13.7 x 7 Size 6054 = YA Packing: FKP 3 = FKP3 160 VC = E pf = x 7 x 4.6 PCM 2.5 = 0B AMMO H x 340 = A MKS 4 = MKS4 250 VC = F pf = x 7.5 x 4.6 PCM 2.5 = 0C AMMO H x 370 = B MKP 4 = MKP4 400 VC = G pf = x 6.5 x 7.2 PCM 5 = 1A AMMO H x 340 = C MKP 10 = MKP1 450 VC = H pf = x 7.5 x 7.2 PCM 5 = 1B AMMO H x 370 = FKP 4 = FKP4 600 VC = I pf = x 7 x 10 PCM 7.5 = 2A REEL H = F FKP 1 = FKP1 630 VC = J mf = x 8.5 x 10 PCM 7.5 = 2B REEL H = H MKP-X2 = MKX2 700 VC = K mf = x 9 x 13 PCM 10 = 3A REEL H = I MKP-X2 R = MKXR 800 VC = L mf = x 9 x 13 PCM 10 = 3C REEL H = J MKP-Y2 = MKY2 850 VC = M0 0.1 mf = x 11 x 18 PCM 15 = 4B ROLL H16.5 = N MP 3-X2 = MPX2 900 VC = N mf = x 12.5 x 18 PCM 15 = 4C ROLL H18.5 = O MP 3-X1 = MPX VC = O mf = x 14 x 26.5 PCM 22.5 = 5A BLISTER W = P MP 3-Y2 = MPY VC = P0 1 mf = x 15 x 26.5 PCM 22.5 = 5B BLISTER W = Q MP 3R-Y2 = MPRY 1200 VC = Q0 2.2 mf = x 19 x 31.5 PCM 27.5 = 6A BLISTER W = R Snubber MKP = SNMP 1250 VC = R0 4.7 mf = x21 x 31.5 PCM 27.5 = 6B BLISTER W = T Snubber FKP = SNFP 1500 VC = S0 10 mf = x 19 x 41.5 PCM 37.5 = 7A Bulk Standard = S GTO MKP = GTOM 1600 VC = T0 22 mf = x 22 x 41.5 PCM 37.5 = 7B TPS Standard = Y C-LINK MKP 4 = CP VC = U0 47 mf = x 49 x 182 CH_ = H0... C-LINK MKP 5 = CP VC = V0 100 mf = x 77 x 182 CH_ = H1 C-LINK MKP 6 = CP VC = W0 220 mf = C-LINK HC = CH_ 4000 VC = X0 1 F = A010 SuperCap C = SCSC 6000 VC = Y0 2.5 F = A025 SuperCap MC = SCMC 250 VAC = 0W 50 F = A500 Special features: SuperCap R = SCSR 275 VAC = 1W 100 F = B100 Standard = 00 Lead length (untaped) SuperCap MR = SCMR 300 VAC = 2W 110 F = B110 Version A1 = 1A 3.5 ±0.5 = C9 400 VAC = 3W 600 F = B600 Version A1.1.1 = 1B 6-2 = S 440 VAC = 4W 1200 F = C120 Version A1.2 = 1C 16 ±1 = P1 500 VAC = 5W The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the pages of the respective WIMA range. 125
WIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus
More informationWIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus
More informationWIMA FKP 3. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse duty construction Very low dissipation factor Negative capacitance change versus
More information100 khz 4 x x MHz 10 x Mechanical Tests
WIMA FKP 2 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM mm Special Features Pulse duty construction Close tolerances up to ±2. % (±1 % on request) Very low dissipation factor
More informationWIMA FKP 02. Typical Applications. Construction. Packing. Mechanical Tests
WIMA FKP 02 Polypropylene (PP) Film/Foil Capacitors for Pulse Applications in PCM 2.5 mm. Capacitances from 100 pf to 0.01 mf. Rated Voltages from 63 VC to 400 VC. Special Features Pulse duty construction
More informationWIMA FKP 2. Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM 5 mm. Typical Applications. Construction.
WIMA FKP 2 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM mm Special Features Pulse duty construction Close tolerances up to ±2. % (±1 % on request) Very low dissipation factor
More informationWIMA FKP 3. Typical Applications. Construction. Packing. Mechanical Tests
WIMA FKP 3 Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM 7.5 mm to 15 mm. Capacitances from 100 pf to 0.22 mf. Rated Voltages from 63 VC to 1000 VC. Special Features Pulse duty
More informationWIMA MP 3-Y2. Metallized Paper (MP) RFI-Capacitors Class Y2 PCM 10 mm and 15 mm. Typical Applications. Construction. Packing.
WIMA MP 3-Y2 Metallized Paper (MP) RFI-Capacitors Class Y2 PCM 10 mm and 15 mm Special Features Particularly high reliability against active and passive flammability Excellent self-healing as well as high
More informationWIMA FKS 2. Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm. Typical Applications. Construction. Mechanical Tests.
WIMA FKS 2 Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm Special Features Pulse duty construction According to RoHS 2011/65/EU Typical Applications For general C-applications
More informationWIMA FKP 4. Typical Applications. Construction. Packing. Mechanical Tests
WIMA FKP 4 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts and Self-Healing, Internal Series Connection for Increased Current Carrying Capability PCM
More informationWIMA FKP 2. Typical Applications. Construction. Mechanical Tests. Packing
WIMA FKP 2 Polypropylene (PP) Film/Foil Capacitors for Pulse Applications in PCM mm. Capacitances from 33 pf to 0.033 mf. Rated Voltages from 63 VC to 1000 VC. Special Features Pulse duty construction
More information300 VAC* W H L PCM** Part number 1000 pf MKY22W11003D MKY22W11503D MKY22W12203D00
WIMA MKP-Y2 Metallized Polypropylene (PP) RFI-Capacitors Class Y2 in PCM 10 mm to 37.5 mm. Capacitances from 1000 pf to 1.0 mf. Rated Voltage 300 VAC. Special Features Reliable self-healing High degree
More informationCountry Authority Specification. Germany VDE IEC USA/Canada UL UL CAN/CSA-E Mechanical Tests
WIMA MP 3-Y2 / 3R-Y2 Metallized Paper (MP) RFI-Capacitors Class Y2 in PCM 10 mm to 27.5 mm. Capacitances from 1000 pf to 0.1 mf. Rated Voltages 250 VAC and 300 VAC. Special Features Particularly high reliability
More informationWIMA MKP 4. Metallized Polypropylene (PP) Capacitors PCM 7.5 mm to 37.5 mm. Typical Applications. Construction. Packing.
WIMA MKP 4 Metallized Polypropylene (PP) Capacitors PCM 7.5 mm to 37.5 mm Special Features High volume/capacitance ratio Self-healing Very low dissipation factor Negative capacitance change versus temperature
More informationCapacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:
WIMA FKP 1 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts, ouble-sided Metallization and Self-Healing Internal Series Connection for Highest Current
More informationCapacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:
WIMA FKP 1 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts, ouble-sided Metallization and Self-Healing Internal Series Connection for Highest Current
More information0.01 mf MKX2AW21002C MKX2AW21003F MKX2AW21502C MKX2AW21503F00
WIMA MKP-X2 Metallized Polypropylene (PP) RFI-Capacitors Class X2 in PCM 7.5 mm to 37.5 mm. Capacitances from 1000 pf to 10 mf. Rated Voltage 305 VAC. Special Features Reliable self-healing High degree
More informationWIMA MKS 2. Metallized Polyester (PET) Capacitors in PCM 5 mm. Typical Applications. Construction. Packing. Mechanical Tests
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications e.g.
More informationWIMA FKS 2. Typical Applications. Construction. Mechanical Tests. Packing
WIMA FKS 2 Polyester (PET) Film/Foil Capacitors for Pulse Applications in PCM 5 mm. Capacitances from 1000 pf to 0.047 mf. Rated Voltages from 63 VC to 630 VC. Special Features Pulse duty construction
More informationWIMA FKS 3. Polyester (PET) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKS 3 Polyester (PET) Film an Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse uty construction Accoring to RoS 2002/95/EC Typical Applications For general C-applications
More informationWIMA FKM 2. Film and Foil Capacitors with Mixed Dielectric for Pulse Applications in PCM 5 mm. Typical Applications. Construction.
WIMA FKM 2 Film an Foil Capacitors with Mixe ielectric for Pulse Applications in PCM 5 mm Special Features Pulse uty construction Constant capacitance value versus temperature (similar to the obsolete
More informationWIMA MKS 2. Metallized Polyester (PET) Capacitors in PCM 5 mm. Typical Applications. Construction. Packing. Mechanical Tests
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications e.g.
More informationCapacitance range: 1000 pf to 10 mf (E12-values on request) Rated voltages: 16 VDC 50 VDC 63 VDC 100 VDC 250 VDC 400 VDC 630 VDC
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications e.g.
More informationWIMA FKS 2. Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm. Typical Applications. Construction. Packing.
WIMA FKS 2 Polyester (PET) Film an Foil Capacitors for Pulse Applications in PCM 5 mm Special Features Pulse uty construction Accoring to RoS 2002/95/EC Typical Applications For general C-applications
More informationWIMA MKP-X2. Continuation. General Data
WIMA MKP-X2 Metallize Polypropylene (PP) RFI-Capacitors Class X2 PCM 7.5 mm to 27.5 mm Special Features Reliable self-healing igh egree of interference suppression ue to goo attenuation an low ESR Accoring
More informationWIMA DC-LINK MKP 4. Metallized Polypropylene (PP) - Capacitors for DC-Link Applications. Typical Applications. Construction.
WIM C-LINK MKP 4 Metallized Polypropylene (PP) - Capacitors for C-Link pplications Special Features Capacitances up to 150 mf High volume/capacitance ratio Excellent self-healing properties Very low dissipation
More information50 VDC 10 V 63 VDC 50 V. 1 x 10 4 M (mean value: 2 x 10 4 M ) Measuring time: 1 min. Test voltage: 1.6 U r, 2 sec. Maximum pulse rise time:
WIMA MKS 02 Metallize Polyester (PET) Capacitors in PCM 2.5 mm Special Features igh volume/capacitance ratio an reuce base PCM 2.5 mm Self-healing Accoring to RoS 2002/95/EC Typical Applications For general
More informationCapacitance. Mechanical Tests
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm Special Features High volume/capacitance ratio Self-healing According to RoHS 2011/65/EU Typical Applications For general C-applications e.g.
More informationWIMA MKS 2. Metallized Polyester (PET) Capacitors in PCM 5 mm. Capacitances from 0.01 mf to 10 mf. Rated Voltages from 50 VDC to 630 VDC.
WIMA MKS 2 Metallized Polyester (PET) Capacitors in PCM 5 mm. Capacitances from 0.01 mf to 10 mf. Rated Voltages from 50 VC to 630 VC. Special Features High volume/capacitance ratio Self-healing AEC-Q200
More informationCountry Authority Specification Symbol. Mounting Recommendation
WIMA MP 3-X2 Metallize Paper (MP) RFI-Capacitors Class X2 PCM 10 mm to 27.5 mm Special Features Particularly high reliability against active an passive flammability Excellent self-healing as well as high
More informationWIMA FKP 4. Typical Applications. Construction. Packing. Mechanical Tests
WIMA K 4 olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts an Self-ealing, Internal Series Connection for Increase Current Carrying Capability CM 1 mm to 37.
More informationCapacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:
olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts, ouble-sie Metallization an Self-ealing Internal Series Connection for ighest Current Carrying Capability 1
More informationCapacitance range: 1000 pf to 10 mf (E12-values on request) Rated voltages: 100 VDC 250 VDC 400 VDC 630 VDC 850 VDC 1000 VDC 1600 VDC 2000 VDC
WIMA MKP 4 Metallized Polypropylene (PP) Capacitors in PCM 7.5 mm to 37.5 mm. Capacitances from 1000 pf to 10 mf. Rated Voltages from 100 VC to 2000 VC. Special Features High volume/capacitance ratio Self-healing
More informationWIMA MKS 4. Metallized Polyester (PET) Capacitors PCM 7.5 mm to 37.5 mm. Typical Applications. Construction. Packing.
Metallized Polyester (PET) Capacitors PCM 7.5 mm to 37.5 mm Special Features Electrical ata High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general C-applications
More informationMetallized Polypropylene (PP) - Capacitors for DC-Link Applications. Capacitances from 1.0 mf to 400 mf. Rated Voltages from 400 VDC to 1300 VDC.
WIM C-LINK MKP 4 Metallized Polypropylene (PP) - Capacitors for C-Link pplications. Capacitances from 1.0 mf to 400 mf. Rated Voltages from 400 VC to 1300 VC. Special Features Capacitances up to 400 mf
More informationCapacitance range: mf to 25 mf Rated voltages: 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC
WIMA Snubber MKP Snubber MKP Capacitors for Pulse Applications with ouble-sided Metallized Electrodes, Schoopage Contacts and Internal Series Connection Special Features Pulse duty construction Self-healing
More informationWIMA MKS 4. Typical Applications. Construction. Mechanical Tests. Packing. High volume/capacitance ratio Self-healing According to RoHS 2011/65/EU
WIMA MKS 4 Metallized Polyester (PET) Capacitors in PCM 7.5 mm to 52.5 mm. Capacitances from 1000 pf to 680 mf. Rated Voltages from 50 VC to 2000 VC. Special Features Electrical ata High volume/capacitance
More informationRated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
More informationFilm Capacitors. Metallized Polyester Film Capacitors (MKT) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32591... B32594 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto
More informationCeramic disc capacitors (kinked leads) Class 2, low loss (0.2% max.) 500 V; 1 kv; 2 kv; 3 kv
FEATURES High reliability Low losses High capacitance in small size Kinked leads. APPLICATIONS In electronic circuits where low losses and high capacitance per volume are essential, for example: SMPS HF
More informationMetallized Polypropylene Film Capacitors (MKP)
Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: July 2015 B32656S... B32658S EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures
More informationMSB Metallized polyester film capacitor MKT - High performance
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor run applications. Low power switching applications. Low pulse operation
More informationFilm Capacitors. Metallized Polyester Film Capacitors (MKT-S) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT-S) Series/Type: B32537 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
More informationPHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS CONSTRUCTION L B Pulse operation in SMPS, TV, monitor, electrical ballast and
More informationAccording to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency
More informationPolyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
More informationR82. p = 5mm. MKT Series R 8 2 C -
Loose All dimensions are in mm. Taped R82 Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. p = 5mm B
More information1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
More informationEMI Suppression Capacitors
Construction Plastic case (UL 94 V-0) Epoxy resin sealing, flame-retardant Axial leads, insulating sleeve (type B8119 Self-healing Smallest possible dimensions Terminals Parallel wire leads, tinned Two
More informationFailure quota 300/10 9 component hours. Warning: this specification must be completed with the data given in the General technical information chapter
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
More informationPolypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 Series is constructed of metallized polypropylene
More informationCMK Metallized polycarbonate CECC approval, detail specification According to CECC 30500, IEC 384-6
Metallized polycarbonate CECC approval, detail specification 30501-020 According to CECC 30500, IEC 384-6 TYPICAL APPLICATIONS Automotive and other applications in high ambient temperatures. Stable filters,
More informationMTB. MKT box with radial terminals small size general purpose. Ed. 04 Rev Dissipation factor (DF), max. tgδ x10-4, measured at 25 ±5 C
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low pulse operation Dielectric Polyester Electrodes Vacuum
More informationPrinted Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G capacitor is a polypropylene metallized film capacitor with a polyester tape wrapping filled with resin, and uses tinned
More informationPPS. MKP axial terminals snubber medium-high pulse applications high current high frequency switching. Ed. 04 Rev
Main applications Snubber, energy conversion and control in power semiconductor circuits, industrial and motor speed controls, SMPS, induction heaters, high voltage, high current and medium-high pulse
More informationApplications R71 M F 2100 AA 00 J
Polypropylene Pulse/High Frequency Capacitors R71 Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Overview The R71 is constructed of metallized polypropylene film with radial leads
More informationMetallized Polypropylene Film Capacitor DC-Link capacitor
Metallized Polypropylene Film Capacitor DC-Link capacitor APPLICATIONS Industrial and high-end power supplies High performance DC filtering Frequency converters Solar inverters Renewable energies inverters
More informationPSB / RSB - (Expanded range)
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, resonant circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and
More informationmm. Film dielectric trimmers QUICK REFERENCE DATA
5 mm FEATURES Housing diameter 5 mm Top and bottom or top adjustment Round or hexagonal head Vertical version. APPLICATIONS For consumer and industrial equipment. DESCRIPTION The vanes of the trimmer are
More informationApplications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor
More informationCommon to almost all eco-friendly lighting.
A series on topics of relevance and advances from the Technical Centre, Deki Electronics Ltd, India February 2012 Common to almost all eco-friendly lighting. RoHS compliant film capacitors from Deki. www.dekielectronics.com
More informationConfiguration. Specification: Capacitance Range. Insulation Resistance. Maximum Pulse Rise Time(V/μsec.): Shown As Following Table.
Metallized Polyester Film s (Radial Dipped) Configuration FEATURES Self healing characteristics. Miniature size, light in weight. High stability of temperature vs. Cap. and tanδ. High density thermosetting
More informationPrinted Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical
More informationTHIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Features... 2 Applications... 2 Approvals... 2 Part Marking... 3 System... 4 Absolute Ratings... 4 Fuse Configuration and Dimensions... 5 Specifications...
More informationMAB - (Updated approval references)
Main applications Motor run capacitor, general purpose AC applications, medium-low power switching capacitor for industrial and motor speed controls, electronic ballasts and SMPS Dielectric Polypropylene
More informationAC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type
www.vishay.com AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES Low loss dielectric Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More information1.0 Rated Values and Operational Data
Applications Protection and Commutation Power Electronics Impulsional devices with intensive / High Current Switching Power Supplies Main Characteristics Dry film-foil technology Nominal Voltage: 630 VDC
More information100V 160V 200V 250V 400V
CL12 Polyester Film Capacitors Structures: Polypropylene film, non- inductive, phenolic resin coating Features: Excellent frequency and temperature characteristics, Very small loss even at high frequency.
More informationØ 5 mm Film Dielectric Trimmers
Ø 5 mm Film Dielectric Trimmers FEATURES Housing diameter 5 mm Top and bottom or top adjustment Round head Mounting: radial Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationPrinted Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical
More informationWF12SR360JTL. Size Surge 5% chip resistors. Customer : Approval No : Issue Date : Customer Approval :
SPECIFICATION OF SURGE 5% CHIP RESISTOR Ver: 1 Page: 1 of 7 ROHS compliance WF12SR360JTL Surge 5% chip resistors Size 1206 Customer : Approval No : Issue Date : Customer Approval : SPECIFICATION OF SURGE
More informationTHZ NEW - In Progress
Main applications AC power applications, input-output AC filtering, harsh environment applications Dielectric Polypropylene Electrodes Vacuum deposited metal layers Coating Solvent resistant plastic case
More informationNTC thermistors, high-temperature sensors /7/8...
FEATURES Small diameter Quick response to temperature change High stability over a long life Wide temperature range from 40 to +300 C Resistant to corrosive atmospheres and harsh environments. APPLICATION
More informationApplications R46 K I M
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V 0. Applications For worldwide
More informationCCDSeries FEATURES ORDERING CODE CCD B 101 K H 7 2 (1) (2) (3) (4) (5) (6) (7) (8) (9) Safety Standard Recognized Ceramic Capacitors
CCDSeries Safety Standard Recognized Ceramic s Configuration FEATURES Complying with IEC60384-14 4 th Edition Class X1Y1 and Class X1Y2 Dielectric Strength: AC2600V (r.m.s) for X1Y2 and AC4000V (r.m.s)
More informationEnergy sector DC LINK CAPACITORS AND SNUBBERS
Energy sector DC LINK CAPACITORS AND SNUBBERS DC link APPLICATIONS Hybrid vehicles Wind plants Solar power plants Electric energy generation from sea waves Medical equipment Industrial equipment Car electronics
More informationResin-Coated, Radial-Leaded Solid Tantalum Capacitors
FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*
More informationMHBS (MHB version S) NEW in progress
Main applications Switching capacitor for industrial and motor speed controls, DClink, SMPS, induction heaters, suitable for AC applications Main characteristics High voltage and high capacitance in small
More informationSpecification. N1206 F Series. Approved by. Date of Establish : (Ref. No : 1206 F_Rev.2)
Specification Product Type SMD(Micro) Fuse N1206 F Series Approved by Date of Establish : 2012.11.01(Ref. No : 1206 F_Rev.2) 1. Scope This specification covers the detail requirements for SMD Micro fuse
More informationMPPB Series. Metallized Polypropylene Film Capacitor Box type. Metallized Polypropylene Film Capacitor - Box type Features. Typical Applications
Metallized Polypropylene Film Capacitor - Box type Features Metallized polypropylene structure Low loss at high frequency Small inherent temperature rise Plastic case (UL94 V-0), Epoxy resin sealing RoHS
More informationCGA Series Automotive Grade Capacitors
CGA Series Automotive Grade Capacitors Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
More informationPolypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Overview The R76 Series is constructed of polypropylene
More informationC Series Mid Voltage Application
C Series Mid Application Type: C1005 [EIA CC0402] C1608 [EIA CC0603] C2012 [EIA CC0805] C3216 [EIA CC1206] C3225 [EIA CC1210] C4532 [EIA CC1812] C5750 [EIA CC2220] Issue date: April 2011 TDK MLCC US Catalog
More informationApplications R46 3 N M. Capacitance Code (pf)
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements of UL 94 V 0. Applications For worldwide
More informationTABLE of contents. Metal Oxide Varistor (MOV) Varistors-5D Series Varistors-7D Series Varistors-10D Series... 5
TABLE of contents Subject Page Metal Oxide Varistor (MOV)..................................................... 1 Varistors-5D Series............................................................ 3 Varistors-7D
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
More informationWF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10H_V01 Jan.2010 FEATURE 1. High reliability and stability
More informationApplications C87 8 B F AA 4 J
C87, Cylindrical Aluminum Case, Overpressure Protection, 420 VAC/470 VAC Overview C87 is a polypropylene metallized film, with a cylindrical aluminium can-type construction filled with resin. It uses faston,
More informationSR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512 ( Automotive & Anti-sulfuration ) Page 1 of 7 SR20-25X_V04 Sep.-2011 FEATURE 1. High reliability and stability ±1% 2. Sulfuration resistant 1000ppm
More informationVAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
More informationElectrical Specifications 5mm. Ic (A) (V)
Features: AC operating voltage from 11V to 1000V DC operating voltage from 14V to 1465V Peak current up to 6500 amps Energy handling up to 625J UL1449 certified file no. E476752 Operating temperature range
More informationApplications R47 5 I M
R47 Series, Class X2, 520 VAC, 85ºC (Automotive Grade) Overview The R47 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the
More informationWR10X ±1%, ±5% General purpose chip resistors Size 1210
WR10X ±1%, ±5% General purpose chip resistors Size 1210 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR10X Version 02 Jun.-2005 FEATURE 1. High reliability and stability 2. Reduced
More informationGeneral Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, VDC.
General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, 50 630 VDC Overview Dual in-line (DIL) metallized polyester (PET) film capacitor. Encapsulation
More informationfilm capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.001μF to 10μF Capacitance tolerance ± 10 %, ± 20 % Rated
More informationP-Series 11 to to to to to to to 1100 >1000 <25
Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
More informationTemperature= +40±2 C Capacitance change ±3%
MS - (Expanded range; new lugs) MKP - Switching - igh current - DC-ink - AC Main applications DC-ink, switching capacitor for industrial and motor speed controls, SMPS, solar inverters, power converters
More informationApplications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T
MDS, Dual In-Line Low Profile, 50 630, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor is encapsulated in a self-extinguishing material, meeting the requirements of UL
More informationCAPACITOR CATALOG SPE GROUP. Capacitor & Diode ISO Professional Manufacturer. To Support the success of enterprise To Support a successful enterprise
CAPACITOR CATALOG SPE GROUP Capacitor & Diode ISO Professional Manufacturer To Support the success of enterprise To Support a successful enterprise SUNTAP ELECTRONICS GROUP CO.,LTD. Tel: +86 020 84122024
More information