MKV AC capacitors. General AC applications. Ordering code: B25832 Date: September 2005

Transcription

1 MKV C capacitors General C applications Orering coe: Date: September 2005 EPCOS G Reprouction, publication an issemination of this ata sheet, enclosures hereto an the information containe therein without EPCOS' prior express consent is prohibite.

2 Features Compact esign Long-term stability an reliability pplications For commutation in the low-frequency range Construction Self-healing Plastic ielectric Oil-impregnate tubular winings (no PCB) Metal-spraye en faces ensure reliable contacting Cylinrical aluminum case Ceramic or plastic lea-throughs Mounting bolts M8 or M12 Terminals Tab connectors 6.3 mm Dual tab connectors 6.3 mm Mounting If the vibration stress is 5 g an the capacitors are 60 mm in iameter, the bolt is use for mounting. Grouning Mounting bolts for grouning in accorance with VDE 0100 Grouning ientification in accorance with DIN Iniviual ata sheets Iniviual ata sheets contain etaile specification incl. thermal ata. Upon request, these ata sheets are available for each capacitor type. Please rea Cautions an warnings an 2 09/05 Important notes at the en of this ocument.

3 Technical ata Stanars IEC /2 EN /2 VDE 0560 part 120 an 121 Dielectric issipation factor tan δ Capacitance tolerance ± 10 % Max. repetitive rate î --- of voltage rise (v/t) max C Max. non-repetitive rate of voltage rise Climatic ata: (v/t) s Min. operating temperature T min 25 C Max. operating temperature T max + 85 C verage relative humiity 75 % Failure quota α FQ(co) 1000 failures per 10 9 component hours Loa uration t LD(co) up to h Storage temperature limit T stg 55/+ 85 C IEC climatic category 25/085/56 (IEC 68-1 an 2) Test ata: C test voltage between terminals V TT 1.25 x V R, 50 Hz, 10 s (or DC 1.75 x V R, 10 s) between terminals an case V TC 2 V i V, 50 Hz, 10 s Insulating voltage V i = max. recurrent peak voltage vˆ / 2 Insulation resistance R ins 1 μf: 3000 MΩ Self-ischarge time constant τ =R ins x C > 1 μf: 3000 s Dissipation factor tan δ I --- S C Please rea Cautions an warnings an 3 09/05 Important notes at the en of this ocument.

4 Characteristics an orering coes C R 1) μf I max V R = C 640 V î I s L self R S 20 C mω nh vˆ = 800 V v s = 1100 V Dimensions l mm Fig. ppr. Orering coe weight g V TT = C 800 V, 10 s V TC = C 2200 V, 10 s F4105K F4155K F4165K F4205K F4225K F4255K F4305K F4305K F4335K F4405K F4475K F4505K C4605K F4685K F4705K C4805K C4106K C4126K C4146K C4156K C4166K C4206K C4226K C4256K C4306K C4336K C4406K C4476K C4506K009 1) Other capacitance values upon request Please rea Cautions an warnings an 4 09/05 Important notes at the en of this ocument.

5 Characteristics an orering coes C R 1) μf I max V R = C 930 V î I s R S 20 C L self mω nh mm vˆ = 1200 V v s = 1600 V Dimensions l Fig. ppr. Orering coe weight g V TT = C 1200 V, 10 s V TC = C 2700 V, 10 s F6155K F6205K F6255K C6305K C6405K C6505K C6555K C6605K C6705K C6805K C6106K C6126K C6156K C6186K C6206K C6226K009 1) Other capacitance values upon request Please rea Cautions an warnings an 5 09/05 Important notes at the en of this ocument.

6 Dimensional rawing 1 Dual tab connectors 6.3 mm Dimensional rawing 2 Dual tab connectors 6.3 mm l 13,5 max. 6,3±0,1 8+0,5 l 13,5 max. 6,3±0,1 8+0,5 ø 1 l M12 0,8±0, ,8+0,2 6,8+0,2 KLK0908-V 0,8±0,04 KLK Dimensions in mm +0.5 l l 1 +1*) Creepage istance Clearance Dimensions in mm 1.2 l Creepage istance *) 8 mm = threae bolt M8 12 mm = threae bolt M Clearance Mounting parts (inclue in elivery) Threae bolt Max. torque Toothe washer Hex nut M8 4 Nm J 8.2 DIN 6797 M 8 DIN 439 M12 10 Nm J 12.5 DIN 6797 M12 DIN 439 Please rea Cautions an warnings an 6 09/05 Important notes at the en of this ocument.

7 l l MKV C Capacitors Dimensional rawing 3 Tab connectors 6.3 mm Dimensional rawing 4 Tab connectors 6.3 mm 18 max. Tab connector 6,3 x 0,8 DIN max. Tab connector 6,3 x 0,8 DIN M8 8+1 M ,5±0,5 KLK1415-M ,5±0,5 KLK1416-V Dimensions in mm l ± 2 Creepage Clearance istance Dimensions in mm l ± 2 Creepage istance Clearance Mounting parts (inclue in elivery) Threae bolt Max. torque Toothe washer Hex nut M8 4 Nm J 8.2 DIN 6797 M8 DIN 439 Please rea Cautions an warnings an 7 09/05 Important notes at the en of this ocument.

8 Dimensional rawing 5 Tab connectors 6.3 mm 13 max. Tab connector 6,3 x 0,8 DIN M ,5±0,5 8+1 l KLK1418-C Dimensions in mm l ± 2 Creepage Clearance istance Mounting parts (inclue in elivery) Threae bolt Max. torque Toothe washer Hex nut M8 4 Nm J 8.2 DIN 6797 M8 ISO 4035 Please rea Cautions an warnings an 8 09/05 Important notes at the en of this ocument.

9 Cautions an warnings Safety In case of ents of more than 1 mm epth or any other mechanical amage, capacitors must not be use at all. This applies also in cases of oil leakage. Electrical or mechanical misapplication of capacitors may be hazarous. Personal injury or property amage may result from bursting of the capacitor or from expulsion of oil or melte material ue to mechanical isruption of the capacitor. Ensure goo, effective grouning for capacitor enclosures. Observe appropriate safety precautions uring operation (self-recharging phenomena an the high energy containe in capacitors). Hanle capacitors carefully, because they may still be charge even after isconnection. The terminals of capacitors, connecte bus bars an cables as well as other evices may also be energize. Follow goo engineering practice. Failure to follow cautions may result, worst case, in premature failures, bursting an fire. Thermal loa fter installation of the capacitor it is necessary to verify that maximum hot-spot temperature is not exceee at extreme service conitions (see Mechanical protection The capacitor has to be installe in a way that mechanical amages an ents in the aluminum can are avoie. Storage an Operating Conitions Do not use or store capacitors in corrosive atmosphere especially where chlorie gas, sulfie gas, aci, alkali, salt or the like are present. In usty environments, regular maintenance an cleaning especially of the terminals is require to avoi conuctive path between phases an/or phases an groun. Overpressure isconnector To ensure full functionality of an overpressure isconnector, the following must be observe: The elastic elements must not be hinere, i.e. connecting lines must be flexible leas (cables), there must be sufficient space (minimum 12 mm) above the connections for expansion of the overpressure isconnector, foling crimps must not be retaine by clamps. Stress parameters of the capacitor must be within the IEC61071 specification. Service life expectancy Electrical components o not have an unlimite service life expectancy; this applies to self-healing capacitors too. The maximum service life expectancy may vary epening on the application the capacitor is use in. 9 09/05

10 Important notes The following applies to all proucts name in this publication: 1. Some parts of this publication contain statements about the suitability of our proucts for certain areas of application. These statements are base on our knowlege of typical requirements that are often place on our proucts in the areas of application concerne. We nevertheless expressly point out that such statements cannot be regare as bining statements about the suitability of our proucts for a particular customer application. s a rule, EPCOS is either unfamiliar with iniviual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check an ecie whether an EPCOS prouct with the properties escribe in the prouct specification is suitable for use in a particular customer application. 2. We also point out that in iniviual cases, a malfunction of passive electronic components or failure before the en of their usual service life cannot be completely rule out in the current state of the art, even if they are operate as specifie. In customer applications requiring a very high level of operational safety an especially in customer applications in which the malfunction or failure of a passive electronic component coul enanger human life or health (e.g. in accient prevention or life-saving systems), it must therefore be ensure by means of suitable esign of the customer application or other action taken by the customer (e.g. installation of protective circuitry or reunancy) that no injury or amage is sustaine by thir parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions an prouct-specific notes must be observe. 4. In orer to satisfy certain technical requirements, some of the proucts escribe in this publication may contain substances subject to restrictions in certain jurisictions (e.g. because they are classe as hazarous ). Useful information on this will be foun in our Material Data Sheets on the Internet ( Shoul you have any more etaile questions, please contact our sales offices. 5. We constantly strive to improve our proucts. Consequently, the proucts escribe in this publication may change from time to time. The same is true of the corresponing prouct specifications. Please check therefore to what extent prouct escriptions an specifications containe in this publication are still applicable before or when you place an orer. We also reserve the right to iscontinue prouction an elivery of proucts. Consequently, we cannot guarantee that all proucts name in this publication will always be available. 6. Unless otherwise agree in iniviual contracts, all orers are subject to the current version of the General Terms of Delivery for Proucts an Services in the Electrical Inustry publishe by the German Electrical an Electronics Inustry ssociation (ZVEI). 7. The trae names EPCOS, CeraDioe, CSSP, PhaseCap, PhaseMo, SilverCap, SIFI, SIMID, SIKOREL, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WinCap are traemarks registere or pening in Europe an in other countries. Further information will be foun on the Internet at /05