EMC Filters. The following products presented in this data sheet are being withdrawn.

Transcription

1 EMC Filters Series/Type: B84299K0061 The ollowing products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date o Withdrawal B84113H*, B84115E*, B84143B*R* B84113H*, B84115E*, B84143B*R* B84299K006000, B84142B0016R000 Deadline Last Orders Last Shipments EPCOS AG Reproduction, publication and dissemination o this publication, enclosures hereto and the inormation contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company.

2 Ordering Code Substitute Product Date o Withdrawal B84299K0064C000 B84299K0062C000 B84299K0061C000 B84113H*, B84115E*, B84143B*R* B84113H*, B84115E*, B84143B*R* B84113H*, B84115E*, B84143B*R* B84113H*, B84115E*, B84143B*R* Deadline Last Orders Last Shipments For urther inormation please contact your nearest EPCOS sales oice, which will also support you in selecting a suitable substitute. The addresses o our worldwide sales network are presented at

3 B84299K0061 K006 Technical data and measuring conditions Rated voltage V R Rated current I R Test voltage V test Overload capability (thermal) Leakage current l leak 250 V DC/AC, 50/ Hz Reerred to 40 C ambient temperature 1414 V DC, 2 s (line/line) 2830 V DC, 2 s (lines/case) 1.5 I R or 3 min per hour or 2.5 I R or 30 s per hour At 230 V AC, 50 Hz Climatic category (IEC 068-1) For K0061 and K0062: 25//21 ( 25 C/+ C/21 days damp heat test) For K K006: 25/085/21 ( 25 C/+85 C/21 days damp heat test) Approvals EN , UL 1283 Characteristics and ordering codes V R AC/DC I R Terminal cross section l leak R typ Approx. weight Ordering code Approvals V A mm 2 AWG ma mω kg < B84299K0061C < B84299K0062C < B84299K < B84299K0064C < B84299K < B84299K < B84299K006 = approval granted Important notes at the end o this document. 3 01/06

4 B84299K0061 K006 Dimensional drawings B84299K0061C000, B84299K0062C000 (2 and 4 A) M4 x 6 300±15 Line 350±15 30± x litz wires AWG 18 2 x litz wires (BU, BK, GNYE) AWG 18 (BU, BK) 51 Load Marking Type B84299K0061C000 B84299K0062C000 Length 65 mm 5 mm SSB209-8-E B84299K0063 (6 A) 64±0.4 M4 x ±15 350±15 46± x litz wires AWG 18 (BU, BK, GNYE) 2 x litz wires AWG 18 (BU, BK) Line Load Marking Ground terminal M4 x 6 or shielding braid or ixing stud or cable clamp SSB2098-G-E Important notes at the end o this document. 4 01/06

5 B84299K0061 K006 B84299K0064C000 (10 A) 80±0.4 M4 x 8 300±15 Line Load 4± ± x litz wires AWG 16 (BU, BK, GNYE) 2 x litz wires AWG 16 (BU, BK) 8 Ground terminal M4 x 8 or shielding braid or ixing stud or cable clamp Marking ø SSB2099-P-E Important notes at the end o this document. 5 01/06

6 B84299K0061 K006 B84299K0065 (16 A) 10±0.4 M4 x 6 450±15 300± ± x litz wires AWG 14 (BU, BK, GNYE) Line 2 x litz wires AWG 14 (BU, BK) Load 9 Ground terminal M4 x 8 or shielding braid or ixing stud or cable clamp Marking 132 SSB2-W-E Important notes at the end o this document. 6 01/06

7 B84299K0061 K006 B84299K0066 (25 A) 130±0.4 M5 x 3± x litz wires AWG 12 2 x litz wires (BU, BK, GNYE) AWG 12 (BU, BK) 300±15 Line Load 800±20 8 Ground terminal M4 x 6 or shielding braid or ixing stud or cable clamp 68.5 Marking ±3 SSB E Important notes at the end o this document. 01/06

8 B84299K0061 K006 B84299K006 (36 A) 130±0.4 M5 x 3± x litz wires AWG 10 2 x litz wires (BU, BK, GNYE) AWG 10 (BU, BK) 240±15 Line Load 800±15 8 Ground terminal M4 x 6 or shielding braid or ixing stud or cable clamp 68.5 Marking ±3 SSB2102-D-E Important notes at the end o this document. 8 01/06

9 B84299K0061 K006 Insertion loss (typical values at Z = 50 Ω) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) dierential mode (symmetrical) Filters or 2 A Filters or 4 A SSB B84299K0061C SSB0324-B B84299K0062C Hz Hz 10 8 Filters or 6 A Filters or 10 A SSB0325-J B84299K0064C000 SSB0326-S B84299K Hz Hz 10 Important notes at the end o this document. 9 01/06

10 B84299K0061 K006 Insertion loss (typical values at Z = 50 Ω) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) dierential mode (symmetrical) Filters or 16 A Filters or 25 A SSB032-1 SSB B84299K0065 B84299K Hz Hz 10 Filters or 36 A SSB0329-H B84299K Hz 10 Important notes at the end o this document /06

11 EMC ilters Cautions and warnings Important inormation Please read all saety and warning notes careully beore installing the EMC ilter and putting it into operation (see ). The same applies to the warning signs on the ilter. Please ensure that the signs are not removed nor their legibility impaired by external inluences. Death, serious bodily injury and substantial material damage to equipment may occur i the appropriate saety measures are not carried out or the warnings in the text are not observed. Using according to the terms The EMC ilters may be used only or their intended application within the speciied values in lowvoltage networks in compliance with the instructions given in the data sheets and the data book. The conditions at the place o application must comply with all speciications or the ilter used. Warnings It shall be ensured that only qualiied persons (electricity specialists) are engaged on work such as planning, assembly, installation, operation, repair and maintenance. They must be provided with the corresponding documentation. Danger o electric shock. EMC ilters contain components that store an electric charge. Dangerous voltages can continue to exist at the ilter terminals or longer than ive minutes even ater the power has been switched o. The protective earth connections shall be the irst to be made when the EMC ilter is installed and the last to be disconnected. Depending on the magnitude o the leakage currents, the particular speciications or making the protective-earth connection must be observed. Impermissible overloading o the EMC ilter, such as impermissible voltages at higher requencies that may cause resonances etc. can lead to destruction o the ilter housing. EMC ilters must be protected in the application against impermissible exceeding o the rated currents by suitable overcurrent protective /06

12 EMC ilters Important notes The ollowing applies to all products named in this publication: 1. Some parts o this publication contain statements about the suitability o our products or certain areas o application. These statements are based on our knowledge o typical requirements that are oten placed on our products in the areas o application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability o our products or a particular customer application. As a rule, EPCOS is either unamiliar with individual customer applications or less amiliar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product speciication is suitable or use in a particular customer application. 2. We also point out that in individual cases, a malunction o passive electronic components or ailure beore the end o their usual service lie cannot be completely ruled out in the current state o the art, even i they are operated as speciied. In customer applications requiring a very high level o operational saety and especially in customer applications in which the malunction or ailure o a passive electronic component could endanger human lie or health (e.g. in accident prevention or lie-saving systems), it must thereore be ensured by means o suitable design o the customer application or other action taken by the customer (e.g. installation o protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event o malunction or ailure o a passive electronic component. 3. The warnings, cautions and product-speciic notes must be observed. 4. In order to satisy certain technical requirements, some o the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous ). Useul inormation on this will be ound in our Material Data Sheets on the Internet ( Should you have any more detailed questions, please contact our sales oices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change rom time to time. The same is true o the corresponding product speciications. Please check thereore to what extent product descriptions and speciications contained in this publication are still applicable beore or when you place an order. We also reserve the right to discontinue production and delivery o products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version o the General Terms o Delivery or Products and Services in the Electrical Industry published by the German Electrical and Electronics Industry Association (ZVEI).. The trade names EPCOS, EPCOS-Jones, Baoke, CeraDiode, CSSP, MLSC, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further inormation will be ound on the Internet at /06