FrelTec GmbH. Wire Wound Ceramic Chip Inductors SMD

Transcription

1 GmbH Mathildenstr. 10A Starnberg Germany Wire Wound Ceramic Chip Inductors SMD 8/2/2017 1/15 GmbH

2 SPECIFICATION Part Number * 101 * J * S * T05 ** _ Type Size Value Toleranc e Feature type Packing Option 091 : SMD Wire Wound Ceramic Chip Inductor 02 : : 0603 The value is given in nh and N indicates the decimal point. When higher than 100nH then l the last digit is the multiplier which denotes the number of zero following C : ±0,2nH D : ±0,5nH 05 : 0805 Example: G : ±2% 06 : N3 : 3,3 nh H : ±3% 08 : N : 22 nh J : ±5% 151 : 150 nh K : ±10% S : Sn plating, five-faces Coating *** T04: Tape and reel; for 4k pc available for 0402 and 0603 (7 reel) T02: Tape and reel; for 2k pc available for 0805, 1206 and 1008 (7 reel) * not all combination is possible S: HP4287 H : High Current and High Q Q: High Q, Low DCR All products according to RoHS (2011/65/EU) 8/2/2017 2/15 GmbH

3 Dimensions and recommended PCB pattern for reflow soldering: Standard Size A A max. Overall B E Terminal F G F B max. C D C max. I J I H Pad Layout Terminal Wraparound: Approx /0.18mm Both Ends D Ref. E F G H I J ,27 0,76 0,61 0,15 0,51 0,23 0,56 0,66 0,50 0, ,80 1,12 1,02 0,38 0,76 0,33 0,86 1,02 0,64 0, ,29 1,73 1,52 0,51 1,27 0,44 1,02 1,78 1,02 0, ,92 2,79 2,13 0,65 2,03 0,51 1,52 2,54 1,02 1, ,45 1,90 1,40 0,50 1,60 0,50 2,20 1,93 1,02 1,78 High Current / High Q Size A max. B max. C max. D Ref. E F G H I J ,27 0,76 0,61 0,15 0,51 0,23 0,56 0,66 0,50 0, ,80 1,12 1,02 0,38 0,76 0,33 0,86 1,02 0,64 0, ,29 1,73 1,52 0,51 1,27 0,44 1,02 1,78 1,02 0, ,92 2,79 2,03 0,65 2,03 0,51 1,52 2,54 1,02 1,27 Color Coding unit: mm 0603 / 0805 / 1008 Standard Type (Other type is no color coding) The inductance value represented by the dot is shown on the data page for each type. Because of small sizes, these parts are marked with a single color dot. Construction Code Color Coding 4 1 Ceramic Core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet Wire 4 UV Glue /2/2017 3/15 GmbH

4 Standard Electrical Specifications Wire Wound Chip Inductors / Standard Type Type 0402 (nh) 1,0 Tolerance L Freq. (MHz) Quality SRF DCR IDC 900MHz 1,7GHz Factor min. (GHz) min. (Ω) max. (ma) max. L Q L Q 16 12,70 0, , , , ,30 1, , , ,10 1, , ,070 2,2 ±10% 19 10, , , , , , , , ,40 0, , , ,3 19 7,00 3,6 3, , ,80 0, , , ,9 19 5,80 3, , ,3 18 6,00 0, , , ,7 18 4,70 0, , , ,1 20 4, , , ,6 20 4, , , ,083 6,2 ±5, ±10% 20 4, , , ,8 20 4,80 6, , ,5 22 4, , , ,104 8,2 22 4,40 8, , ,7 18 4,10 0, , , ,0 22 4,16 0, , , ,5 18 4,00 0,200 9, , ,90 0,195 9, , ,68 10, , , ,60 11, , ,45 0, , , ,28 0,172 14, , ,10 0,220 16, , ,10 0, , , ,04 0, , , ,00 0, , , ,80 23, , ,72 23, , , ,70 25, , ±2, ±5, ±10% 24 2,48 28, , ,35 0,350 31, , ,35 0,350 34, , ,32 0, , , ,10 0, , , ,24 0, , , ,03 0, , , ,10 0, , , ,75 0,820 50, , ,76 0, , , ,62 1,120 69, , ,26 1, ,16 2, >1,80 2, /2/2017 4/15 GmbH

5 Type 0603 (nh) Tolerance L Freq. (MHz) Quality Factor min. SRF (GHz) min. DCR (Ω) max. IDC (ma) max. 900MHz 1,7GHz Color Code L Q L Q 1, ,58 55 Blue 1,6 24 0,030 12,5 1,8 16 0,045 1, ,66 50 Black ±5, ±10% 2,2 15 6,00 0,100 2, ,20 64 White 2,3 16 >4,00 0,140 2, ,35 40 Yellow 3,3 22 >6,00 0,080 3, ,40 65 Red 3,6 22 5,80 0,063 3, ,58 65 Violet 3,9 22 >6,00 0,080 3, ,96 67 Brown 4,3 22 0,063 4, ,43 67 Orange 4,5 20 4, ,87 92 Gray 0,120 4,7 25 4, ,80 67 Violet 5,1 20 0,160 5, ,36 56 Green 5,80 5,6 20 0,170 5, ,86 77 Yellow 6,2 25 6, ,40 85 Black 6,3 25 0,110 6, ,86 61 Black 6,8 27 6, ,10 81 Red 7,5 28 0, , ,82 65 Brown 8,2 27 4,80 0,110 8, ,40 81 Green 8, ,109 8, ,32 58 Yellow 9,1 35 0,130 9, ,70 80 Black 9,5 28 5,40 0,135 9, ,92 61 Blue ,80 0,130 10, ,6 83 Orange ,086 11, ,1 56 Gray ,00 0,130 12, ,5 83 Yellow ,170 15, ,8 89 Green ,30 0,110 16, ,0 52 White ,20 17, ,4 44 Red 0, ,10 18, ,4 69 Blue , ,5 30 Green 3, ,190 22, ,1 71 Violet ,85 24, ,0 71 Orange ,80 0,130 25, ,9 40 Black ,80 0,220 29, ,6 65 Gray 30 ±2, ±5, ±10% 40 2,80 0,150 31, ,8 28 Brown ,220 36, ,5 42 White 2, ,250 39, ,9 24 Red ,20 0,250 42, ,2 40 Black ,280 46, ,3 21 Orange 2, ,280 52, ,2 35 Brown ,280 55, ,2 34 Blue 200 1, ,310 62, ,0 26 Red ,80 0,340 68, Gray ,340 80, Orange ,490 82, Yellow 1, ,540 96, Green , , ,4 6 Brown ,40 0, , ,5 13 Blue ,35 0, , ,7 15 Violet ,30 0, , ,3 8 Gray ,40 0, , White , , Blue ,30 0, , White , Yellow 1, ,25 305, Black ,20 1, , Brown ,00 2, , Violet ,90 2, , Red ,00 2, , Green ,75 2, , Orange , , Blue 0, , , Yellow ,60 3, White 8/2/2017 5/15 GmbH

6 Type 0805 (nh) Tolerance L Freq. (MHz) Quality Factor min. 8/2/2017 6/15 GmbH SRF (GHz) min. DCR (Ω) max. IDC (ma) max. Color Code 2,7 0,06 Brown 1500MHz 2,8 7,900 0, Gray 3,0 1500MHz 0,06 White 3,3 6,000 0,08 Black 1500MHz 3,9 0,08 None 4,7 0,08 None ±5, ±10% 1000MHz 5,6 5,500 0,08 Orange 6,2 0, Green 6,8 0,11 Brown 7,5 1000MHz 4,500 0,14 Green 8,2 4,700 0,12 Red 8,7 4,000 0, White MHz 4,200 0,10 Blue 12 4,000 0,15 Orange MHz 3,400 0,17 Yellow 18 3,300 0,20 Green 20 2,600 0,22 None 500MHz 22 2,600 0,22 Blue MHz 2,000 0,22 Gray MHz 2,500 0,25 Violet 30 2,050 0,25 None 500MHz 33 2,050 0,27 Gray MHz 1,700 0, Orange 39 2,000 0,29 White 43 1,650 0,34 Yellow MHz 1,650 0,31 Black ,550 0,34 Brown 68 1,450 0,38 Red 72 1,400 0,40 Green 82 1,300 0,42 Orange 500MHz 91 0,48 Black 150 1, ,46 Yellow 110 1,000 0,48 Brown 120 1,100 0,51 Green ±2, ±5, ±10% 0,920 0,56 Blue MHz 0,870 0,60 Red 180 0,870 0,64 Violet 200 0,860 0,66 Orange 220 0,850 0,70 Gray MHz 0,690 1,00 Red MHz 0,680 1, Green 270 0,650 1,00 White 300 0,620 1, Yellow MHz 0,600 1, Black 360 0,580 1, Green 390 0,560 1, Brown 430 0,430 1, Blue MHz 470 0,375 1, Red 560 0,340 1, Orange 600 0,260 1, White 620 0,220 2, Yellow 50MHz , Green 750 0,200 2, Blue 820 2, Violet MHz MHz 0,100 2,50 White ,9 25MHz 2,50 Black ,9MHz 0,080 2,50 Brown 2,50 Gray

7 2200 0,060 2, Red ,050 3, Orange ,40 Blue 7,9MHz 0, ,40 Green 8/2/2017 7/15 GmbH

8 Type 1008 (nh) Tolerance L Freq. (MHz) Quality Factor min. 8/2/2017 8/15 GmbH SRF (GHz) min. DCR (Ω) max. IDC (ma) max. Color Code 4,7 None ±5, ±10% 1500MHz 4,000 0,15 *5,6 Black *10 4,100 0,08 Brown *12 500MHz 3,300 0,09 Red *15 2,500 0,11 Orange *18 350MHz 2,400 0,12 Yellow *22 2,400 0,12 Green MHz 1,900 0,13 Blue *27 1,600 0,13 Violet 30 1,600 0,14 None * ,600 0, Gray MHz 1,600 0,15 Orange *39 1,500 0,15 White *47 1,500 0,16 Black *56 350MHz 1,300 0,18 Brown *62 1,250 0,20 Blue *68 1,300 0,20 Red 75 1,100 0,21 White 350MHz *82 1,000 0,22 Orange MHz 1,000 0,45 White *100 1,000 0,56 Yellow 350MHz 650 *120 0,950 0,63 Green *150 0,850 0, Blue *180 0,750 0, Violet *220 0,700 0,84 Gray 500 *240 0,650 0,88 White *270 0,600 0, Black *300 ±2, ±5, ±10% 0,585 1,00 Brown 450 *330 0,570 1,05 Red *360 0,530 1, Orange MHz *390 0,500 1, Yellow *430 0,480 1,15 Green 470 *470 0,450 1,19 Blue *560 0,415 1, Violet *620 0,375 1, Gray *680 0,375 1, White *750 0,360 1, Black *820 0,350 1, Brown *910 0,320 1, Red * MHz 0,290 1, Orange *1200 *1500 0,250 2, Yellow 0,200 2, Green * MHz 0,160 2, Blue *2200 0,160 2, Violet *2700 0,140 3,20 Gray 7,9 25MHz 290 *3300 0,110 3,40 White *3900 0,100 3,60 Black 25MHz 260 *4700 0,090 4,00 Brown ,96MHz 0,020 4, Red ,040 4, Orange ,025 6, Yellow ,96MHz 0,020 9, Green ,52 0,018 10,5 130 Blue ,015 11,5 120 Violet * Test Methods / Instrument : Network / Spectrum Analyzer

9 Type 1206 (nh) 6,8 10 Tolerance L Freq. (MHz) Quality Factor min. SRF (GHz) min. 15 ±5, ±10% 3,20 DCR (Ω) max. 300MHz 5,50 0,07 IDC (ma) max. Color Code Brown 4,00 0,08 Red MHz 3,20 0,08 Orange Yellow 18 2,80 Green 0, ,20 Blue 300MHz 24 2, Red ,80 0,11 Violet 1,80 0,11 Gray ,80 0,12 White 47 1,50 0,13 Black 56 1,45 0,14 Brown 62 1,20 0,20 Violet 300MHz 68 1,20 0, Red 82 1,20 0, Orange 91 1,10 0, White 100 1,10 0, Yellow 120 0,75 0, Green MHz 0,95 0, Blue 180 0,90 0, Violet MHz 0,76 0, Gray ±2, ±5, ±10% 270 0,74 0, White MHz 0,68 0, Green ,65 0, Black 360 0,60 0, Blue 390 0,60 0, Brown 470 0,55 1, Red 560 0,47 1, Orange 620 0,47 1, Gray 150MHz 680 0,45 1, Yellow 750 0,44 2, White ,42 1, Green 910 0,41 2, Green ,40 2, Blue ,38 3, Violet 8/2/2017 9/15 GmbH

10 High Current Electrical Specifications Type 0603 (nh) Tolerance L Freq. (MHz) Quality Factor min. 8/2/ /15 GmbH SRF (GHz) min. DCR (Ω) max. IDC (ma) max. Color Code 1,6 12,50 0, None 24 3,6 0, Brown 5,90 3, Red ±5, ±10% 0,054 6,8 35 5,80 Orange ,5 0,059 Yellow 8,2 3,70 0,060 White , Green 12 3,00 0,075 Blue 15 0,080 Violet ±2, ±5, ±10% 2, ,099 Gray 22 0,099 White 42 2, ,105 None High Q Electrical Specifications: Type 0402 (nh) Tolerance L Freq. (MHz) Quality Factor min. 900MHz 1.7GHz SRF (GHz) min. DCR (Ω) max. IDC (ma) max. 1, ,0 0, , ,2 0, , ,1 0, ,4 ±0,2nH, ±0,5nH, ,0 0, ,7 ±5%, ±10% ,0 0, , ,8 0, , ,7 0, , ,50 0, ,3 ±0,5nH, ±5%, ,15 0, ,7 ±10% ,85 0, , ,80 0, , , , ,80 0, , ,80 0, , ,40 0, , ,40 0, , ,00 0, , ,00 0, , ,70 0, ,70 0, ,70 0, ,40 0, ,20 0, ,90 0, ,70 0, ±2%, ±5%, ,55 0, ±10% ,50 0, ,50 0, ,70 0, ,30 0, ,30 0, ,15 0, ,15 0, ,15 0, ,20 0, ,90 0, ,80 0, ,80 0, ,70 0, ,60 0, Color Code

11 ,60 0, ,50 0, ,40 0, ,30 0, ,5 1500MHz 0,020 None 6,00 5,6 1500MHz Brown ,2 1000MHz 4,75 0,035 Red 6,8 ±5, ±10% 1000MHz 4,40 White 8,2 1000MHz 0, Gray 10 3,00 0,060 None MHz 0,045 Orange ,80 0, None MHz 2, Yellow 0, MHz 2,55 Green MHz 2,05 0,055 Blue MHz 0, None ±2, ±5, ±10% 2, MHz 0, Violet 30 1,95 0, Gray 39 1,60 0, White 500MHz 48 0, None 200 1, , Brown ,0 1500MHz 0,04 None 3,9 6,00 White ±5, ±10% 1500MHz 4,1 0, Brown 7,8 500MHz 3,80 Red MHz 3,60 Orange 0, MHz 2, Yellow 18 2,70 Green 350MHz 0, ,05 Blue 33 1,70 Violet 0, ±2, ±5, ±10% 1,30 Gray 350MHz 47 1,45 White 0, ,23 None 68 1,15 0,13 Brown 350MHz ,06 Red 0, MHz 0, Orange 8/2/ /15 GmbH

12 Tape Dimensions P0 E P2 D W F D0 B P1 A Paper Tape Type A B E F P 0 P 1 P 2 W T 1 D ,81 1,23 1,73±0,1 3,50 4,00 2,00 2,00 8,00 0,73 1, ,35 1,95 1,75±0,1 3,50 4,00 4,00 2,00 8,00 0,95 1,5 Emboss ed Plastic Tape Type A B E F P 0 P 1 P 2 W T 1 T 2 D D ,85±0,1 2,30±0,1 1,75±0,1 3,5±0,05 4,0±0,1 4,0±0,1 2,0±0,05 8,0±0,2 1,45±0,05 0,23±0,05 1,5 1, (H) 1,85±0,1 2,30±0,1 1,75±0,1 3,5±0,05 4,0±0,1 4,0±0,1 2,0±0,05 8,0±0,2 1,45±0,05 0,23±0,05 1,5 1, ,95±0,1 3,50±0,1 1,75±0,1 3,5±0,05 4,0±0,1 4,0±0,1 2,0±0,05 8,0±0,2 1,50±0,05 0,23±0,05 1,5 1, ,70±0,1 2,80±0,1 1,75±0,1 3,5±0,05 4,0±0,1 4,0±0,1 2,0±0,05 8,0±0,2 2,00±0,05 0,23±0,05 1,5 1, (H) 2,70±0,1 2,80±0,1 1,75±0,1 3,5±0,05 4,0±0,1 4,0±0,1 2,0±0,05 8,0±0,2 2,00±0,05 0,23±0,05 1,5 1,5 Reel Dimensions Symbol A N C D B G T Dimension 178±2,0 60,0±0,5 13,0±0,3 21,8±0,8 2,0±0,5 9,0±0,3 11,4±1,0 8/2/ /15 GmbH

13 Lead Free Reflow Soldering Profile Stock period The performance of these products, including the solderability, is guaranteed for 12 month, provided that they remain packed as they were when delivered and stored at a temperature of 25 C ± 3 C and a relative humidity less than 80%RH 8/2/ /15 GmbH

14 Electrical Performance Test Item Q SRF DC Resistance RDC Rated Current IDC Over Load Requirement Refer to standard electrical characteristic spec. Inductors shall have no evidence of electrical and mechanical damage Test Method HP4286/E4982A HP4286/E4982A HP4287/E4982A Micro-Ohm meter (Gom-801G)/E4982A Applied the current to coils, the temperature of coil increases T15 C (Ta=25 C) Applied 2 times of rated allowed DC current to inductor for a period of 5 minutes Withstanding Voltage Inductors shall be no evidence of electrical and mechanical damage. AC voltage of 500 VAC applied between inductors terminal and case for 1 min. Insulation Resistance 1000MOhm min. 100 V DC applied between inductor terminal and case Mechanical Performance Test Vibration Item Resistance to Soldering Heat Component Adhesion (Push Test) Requirement Appearance: No damage L change: within ±5% Q change: within ±10% 1 lbs. For lbs. For lbs. For the rest Test Method Test device shall be soldered on the substrate Oscillation Frequency: 10 to 55 to 10Hz for 1 min. Amplitude: 1,5 mm Time: 2 h for each axis (X, Y &Z), total 6 h Solder Temperature: 260±5 C Immersion Time: 10±2 seconds The device should be soldered (260±5 for 10 seconds) to a tinned copper subs rate. A dynamiter force gauge should be applied to the side of the component. The device must with stand a minimum force of 2 or 4 pounds without a failure of adhesion on termination Drop No damage Dropping chip by each side and each corner. Drop 10 times in total Drop height: 100 cm Drop weight: 125 g Solderability 90% covered with solder Inductor shall be dipped in a melted solder bath at 245±5 C for 3 seconds Resistance to Solvent No damage on appearance and marking MIL-STD202F, Method 215D Climatic Test Item Requirement Test Method Temperature Characteristic Humidity Low Temperature Storage Thermal Shock High Temperature Storage Appearance: No damage L change: within ±10% Q change: within ±20% High Temperature Load Life There should be no evidence of short of open circuit. Damp Heat with Load -40 ~+125 C Temperature: 40±2 C Relative Humidity: 90~95% Time: 96±2 hrs Measured after exposure in the room condition for 2 hrs Temperature: -40±2 C Time: 96±2 hrs Inductors are tested after 1 hour at room temperature One cycle: Step Temperature [ C] Time [min.] 1-25± ± ± ±2 15 Total: 5 cycles Temperature: 125±2 C Time: 96±2 hrs Measured after exposure in the room condition for 1hour Temperature: 85±2 C Time: 1000±12 h Load: Allowed DC current Temperature: 40±2 C Relative Humidity: 90~95% Time: 1000±12 h Load: Allowed DC current 8/2/ /15 GmbH

15 Published by GmbH Mathildenstr. 10A; Starnberg; Germany 2017 GmbH. All Rights Reserved. The following applies to all products named in this publication: 1. The information describes the type of component and shall not be considered as assured characteristics. 2. Terms of delivery and rights to change design reserved. 3. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. Nevertheless, we explicitly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 4. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 5. The warnings, cautions and product-specific notes must be observed. 6. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous ). Useful information on this will be found in our Material Data Sheets. Should you have any more detailed questions, please contact our sales offices. 7. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true for the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 8. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the General conditions for the supply of products and services of the electrical and electronics industry published by the German Electrical and Electronics Industry Association (ZVEI), available at 9. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. 10. The trade name is a trademark registered or pending in Europe and in other countries. 8/2/ /15 GmbH