Shielded SMD Power Inductor

Transcription

1 PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for surface mounting Applications PCS124 / 125 / 127/129 -Power Supply for VTRs. -LCD Televisions -Personal Computers -Handheld Communication Equipment -DC/DC Converters, etc. Characteristics except PCSH127 -Rated DC Current: The DC current at which the inductance becomes 25% lower than its initial value or when t=40 C, whichever is lower. (Ta=25 C) -Operating temperature range: -40~125 C Characteristics for PCSH127 -Rated DC Current: The DC current at which the inductance becomes 30% lower than its initial value. (Ta=25 C) -Operating temperature range: -40~125 C Inductance and rated current ranges -PCS62B 1.5µH~330µH 3.50~0.19A -PCS64B 10µH~1000µH 1.35~0.14A -PCS73 1.0µH~1000µH 7.97~0.16A -PCS74 1.0µH~1000µH 8.0~0.18A -PCS µH~330µH 8.75~0.5A -PCS µH~1000µH 8.0~0.4A Dimensions Type H1 max. H2 max. H3 max. Unit: mm H I J PCS62B PCS64B PCS PCS PCS PCS PCS PCS PCSH PCS µH~1000µH 10.0~0.55A -PCS µH~1000µH 17.0~0.76A -PCSH µH~1000µH 25.5~1.14A -Test equipment: L: HP4284A or HP4285A LCR meter DCR: Milli-ohm meter -Electrical specifications at 25 C 1 Revision: 19-May-2015

2 Product Identification PCS 62B M T 101 Product Type PCS :Standard PCSH :High Current Dimensions (AxBxC) 62B: B: : : : : : : Inductor Packaging Inductance Style M: ±20% T: Tape and Reel 1R0: 1.0µH 470: 47µH 101: 100µH Standard Electrical Characteristics PCS62B / 64B / 73 / 74 Type Codes L (µh) RDC (Ω) max. IDC (A) max. 62B 64B B 64B R0 1.0 M R5 1.5 M R2 2.2 M R9 2.9 M R3 3.3 M R9 3.9 M R0 4.0 M R7 4.7 M R5 5.5 M R6 5.6 M R8 6.8 M M M M M M M M M M M M M M M M M M M M M M M M M M Measuring Freq: PCS62B: 0.25V; 0.25V PCS64B: 0.25V PCS73: 0.25V PCS74: 0.25V 2 Revision: 19-May-2015

3 Standard Electrical Characteristics PCS124 / 125 / 127 / 129 Type Codes L (µh) DCR (Ω) max. IDC (A) max R0 1.0 M R2 1.2 M R3 1.3 M R5 1.5 M R8 1.8 M R1 2.1 M R2 2.2 M R4 2.4 M R5 2.5 M R7 2.7 M R1 3.1 M R3 3.3 M R5 3.5 M R9 3.9 M R4 4.4 M R7 4.7 M R6 5.6 M R8 5.8 M R1 6.1 M R8 6.8 M R5 7.5 M R6 7.6 M R2 8.2 M M M M M M M M M M M M M M M M M M M M M M M M M M Measuring Freq: PCS124: 0.25V PCS125: 0.25V; 0.25V PCS127/129: 0.25V; 0.25V 3 Revision: 19-May-2015

4 High Current Electrical Characteristics PCSH127 Type Codes L (uh) DCR (Ω) Max IDC (A) Max 2R2 2.2 M R7 4.7 M R6 5.6 M R8 6.8 M R2 8.2 M M M M M M M M M M M M M M M M M M M M M Measuring Freq: PCSH127: 0.25V 4 Revision: 19-May-2015

5 Tape and Reel specifications INDUCTORS Unit: mm Type Tape size Parts Per Reel W P 13 PCS62B PCS64B PCS PCS PCS PCS PCS PCS PCSH Revision: 19-May-2015

6 SMT Power Inductor Environmental Specifications General Items Specifications Shelf Storage conditions Temperature range: 25±3 ; Humidity: <80% relative humidity. Recommended product should be used within six months from the time of delivery. Storage temperature range Temperature range: -40 to +85. Environmental test Test Items Specifications Test Conditions / Test Methods High temperature Storage test Low temperature Storage test Humidity test Thermal shock test Mechanical test No case deformation or change in appearance. L/L 10% Temperature 85±2, Time: 48±2 hours, Tested after 1hour at room temperature. Temperature -25±2, Time: 48±2 hours, Tested after 1hour at room temperature. Temperature 40±2, 90~95% relative humidity Time: 96±2 hours Tested after 1hour at room temperature. First minutes then minutes last minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature. Test Items Specifications Test Conditions / Test Methods Solder ability test Resistance to Soldering Heat Vibration test Shock resistance Terminal area must have 90% minimum solder coverage. No case deformation or change in appearance. No case deformation or change in appearance. L/L 10% Dip pads in flux then dip in solder pot (SnCuNi) at 245±5 for 3 seconds. Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130~150. Immersing to 260±5 for 10 seconds. Apply frequency 10~55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours. Drop down with 981m/s 2 (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations. The condition of reflow (recommendation) 6 Revision: 19-May-2015