Film Capacitors Power Electronic Capacitors

Transcription

1 Film Capacitors Power Electronic Capacitors Series/Type: Ordering code: * Date: May 2015 Version: 10 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF. Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it! Identification/Classification 1 (header 1 + top left bar): Identification/Classification 2 (header 2 + bottom left header bar): Film Capacitors Power Electronic Capacitors Ordering code: (top right header bar) * Series/Type: (bottom right header bar) Preliminary data (optional): (if necessary) Department: Date: May 2015 Version: 10 FILM R&D / CAP PM FILM P EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company.

2 Film Capacitors Power Electronic Capacitors * 1. Construction and general data Characteristics Standard capacitance tolerance K: ±10% Dielectric dissipation factor (tan δ o ) Θ stg C Expected lifetime t LD (co) h at Θ hs + C (refer to section 1) Fit rate 200 (refer to section 2) Minimum temperature Θ min. C Maximum temperature Θ max. + C (refer to section 2) Storage temperature Θ stg C Maximum hotspot temperature Θ hs (refer to section 1) +85 C for diameter 85 and 90 mm + C for diameter 116 mm Climatic category //56 Maximum altitude 2000 m above sea level (derating curves available upon request) Test data Voltage between terminals V TT 1.5 V DC, 10 s Voltage between terminals and case V TC 00 V AC, 10 s Life test According to IEC Cooling Naturally air-cooled (or forced air cooling) Degree of protection Indoor mounting Design data Impregnation Mounting and grounding Max. torque (case) M12 stud Max. torque terminal Resin filling: Non PCB, hard polyurethane (dry type) M12 threaded bolt on bottom of the aluminum case 10 Nm Female M6: 5 Nm Female M8: 6 Nm Male M8: 8 Nm Reference standards IEC RoHS compliance Certification: UL 810-5th edition (refer to table 1.3) Please read Cautions and warnings and Page 2 of 21

3 Film Capacitors Power Electronic Capacitors * 1.1 Structure of ordering code Version: B = without plastic cap C/D = with plastic cap S = special Series Rated voltage: = 1100 V Terminal type: 0 = Female M6 1 = Male M6 2 = Female M8 3 = Male M8 4 = Female M10 5 = Male M10 9 = special 0 B K 10 1 Rated capacitance: 107 = pf = 100 µf 427 = pf = 420 µf 108 = pf = 1 mf Capacitance tolerance J = ± 5% K = ± 10% A = special Distance between terminals: 1 = 32 mm 2 = mm 3 = mm 4 = mm 9 = special 1.2 Standard types: D (mm) OC ending 32 ± 0.5 ± 0.5 ± 0.5 Diameter (Ø) -**1 -**4 -**3 Terminal type 85 mm Female M6 (0) standard 90 mm Male M8 (3) Female M6 (0) standard available 116 mm Female M6 (0) standard Other terminal configurations available upon request. 1.3 UL approved types Diameter (Ø) 85 mm Series xc xd 90 mm all types 116 mm all types Please read Cautions and warnings and Page 3 of 21

4 Film Capacitors Power Electronic Capacitors * 1.4 Drawings types Figure 1: - 0B - Ø 85mm Figure 2: - 0C / 0D - Ø 85mm - Female terminals (M6) - Female terminals (M6) - Between terminals 32±0.5mm - Between terminals 32±0.5mm Please read Cautions and warnings and Page 4 of 21

5 Film Capacitors Power Electronic Capacitors * Figure 3: - 3B - Ø 90mm Figure 4: - 0B - Ø 116mm - Male terminals (M8) - Female terminals (M6) - Between terminals ±0.5mm - Between terminals ±0.5mm Please read Cautions and warnings and Page 5 of 21

6 Film Capacitors Power Electronic Capacitors * Figure 5: - 0C / 0D - Ø 116mm - Female terminals (M6) - Between terminals ±0.5mm M12 stud on bottom of the aluminum case, nut and washer for fixing are standard for all types. Please read Cautions and warnings and Page 6 of 21

7 Film Capacitors Power Electronic Capacitors * Terms and characteristics The following definitions apply to power capacitors according to IEC Rated capacitance C N Nominal value of the capacitance at 20 C and measuring frequency range of to 120 Hz. Rated DC voltage V RDC Maximum operating peak voltage of either polarity but of a non-reversing type wave form, for which the capacitor has been designed, for continuous operation. Ripple voltage V r Peak-to-peak alternating component of the unidirectional voltage. Maximum surge voltage V s Peak voltage induced by a switching or any other disturbance of the system which is allowed for a limited number of times and duration. - Maximum duration: ms / pulse - Maximum number of occurrences: 1000 (during load) Insulation voltage V i Rms rated value of the insulation voltage of capacitive elements and terminals to case or earth. When it is not specified in the product data sheet, the insulation voltage is at least: V i = V R 2 Maximum rate of voltage rise (dv/dt) max Maximum permissible repetitive rate of voltage rise of the operational voltage. Maximum current I max Maximum rms current for continuous operation. Maximum peak current Î Maximum permissible repetitive current amplitude during continuous operation. Maximum peak current (Î) and maximum rate of voltage rise (dv/dt)max on a capacitor are related as follows: Î = C (dv/dt) max Maximum surge current Î s Admissible peak current induced by a switching or any other disturbance of the system which is allowed for a limited number of times (1000 times) and duration ( ms / pulse). Î s = C (dv/dt) s Ambient temperature Θ A Temperature of the surrounding air, measured at 10 cm distance and 2/3 of the case height of the capacitor. Lowest operating temperature Θ min Lowest permitted ambient temperature at which a capacitor may be energized. Please read Cautions and warnings and Page 7 of 21

8 Film Capacitors Power Electronic Capacitors * Maximum operating temperature Θ max Highest permitted capacitor temperature during operation, i.e. temperature at the hottest point of the case. Hot-spot temperature Θ hs / T hs Temperature zone inside of the capacitor at hottest spot. Tangent of the loss angle of a capacitor tan δ Ratio between the equivalent series resistance and the capacitive reactance of a capacitor at a specified sinusoidal alternating voltage, frequency and temperature. Series resistance R s The sum of all Ohmic resistances occurring inside the capacitor. ESR ESR (Equivalent Series Resistance) representing entire active power in capacitor. ESR = tan δ = ω C tan δ R s + 0 ω C Thermal resistance R th The thermal resistance indicates by how many degrees the capacitor temperature at the hot spot rises in relation to the dissipation losses. Maximum power loss P max Maximum permissible power dissipation for the capacitor s operation. P max = Θhs Θ R Self inductance L self The sum of all inductive elements which are contained in a capacitor. th A Resonance frequency f r The lowest frequency at which the impedance of the capacitor becomes minimum. f r = 2π 1 L self C R Please read Cautions and warnings and Page 8 of 21

9 Film Capacitors Power Electronic Capacitors * V R = 0 V DC / V TT = 10 V DC, 10s / V TC = 00 V AC, 10s C R I s Î R S L self R TH D HC HT Weight Fig. Ordering code µf A ka ka mω nh K/W mm mm mm kg B0287K1 I MAX B07K B0567K B0627K B07K B0787K B0907K B0128K B0148K3 V R = 900 V DC / V TT = 13V DC, 10s / V TC = 00 V AC, 10s C R I MAX I s Î R S L self R TH D HC HT Weight Fig. Ordering code 1 µf ka ka mω nh K/W mm mm mm kg A B0227K C0227K B07K C07K B0427K B0447K B0487K C0487K B07K C07K B0587K B07K B07K B0737K B07K C07K B0837K B0977K B0118K B0158K C0158K883 1 I MAX at Θ C, refer to current derating section for more details Other configurations and capacitance tolerances available upon request Please read Cautions and warnings and Page 9 of 21

10 Film Capacitors Power Electronic Capacitors * V R = 1100 V DC / V TT = 16 V DC, 10s / V TC = 00 V AC, 10s C R I MAX I s Î R S L self R TH D HC HT Weight Fig. Ordering code 1 µf ka ka mω nh K/W mm mm mm kg A B1147K C1147K B1227K B1277K B1287K B1317K C1317K B1377K D17K B1427A101* C1427A101* B1427K C1427K D1427K B1427K B17K D17K B1477K B1487K C1487K B1537K B1617K D1617K B17K D17K B1947K B1118K B1158K103 * Capacitance tolerance A: -15%... 0% 1 I MAX at Θ C, refer to current derating section for more details Other configurations and capacitance tolerances available upon request Please read Cautions and warnings and Page 10 of 21

11 Film Capacitors Power Electronic Capacitors * V R = 1200 V DC / V TT = 10 V DC, 10s / V TC = 00 V AC, 10s C R I MAX I s Î R S L self R TH D HC HT Weight Fig. Ordering code 1 µf ka ka mω nh K/W mm mm mm kg A B1227K B17K B1347K B1367K B1447K B17K B17K B1577K B1737K B1108K203 V R = 1320 V DC / V TT = 19 V DC, 10s / V TC = 00 V AC, 10s C R I MAX I s Î R S L self R TH D HC HT Weight Fig. Ordering code 1 µf ka ka mω nh K/W mm mm mm kg A B1167K B1197K B1227K C1227K B17K B1267K C1267K B1297K B1317K B1337K B1347K C1347K B0377K B1427K B1487K B1667K B1108K323 1 I MAX at Θ C, refer to current derating section for more details Other configurations and capacitance tolerances available upon request Please read Cautions and warnings and Page 11 of 21

12 Film Capacitors Power Electronic Capacitors * V R = 19 V DC / V TT = 29 V DC, 10s / V TC = 00 V AC, 10s C R I MAX I s Î R S L self R TH D HC HT Weight Fig. Ordering Code 1 µf ka ka mω nh K/W mm mm mm kg A B16K C16K B16K C16K B1147K C1147K B1197K B1217K B1297K B1467K B1517K983 1 I MAX at Θ C, refer to current derating section for more details Other configurations and capacitance tolerances available upon request Display of ordering codes for EPCOS products The ordering code for one and the same EPCOS product can be represented differently in data sheets, data books, other publications, on the EPCOS website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under Please read Cautions and warnings and Page 12 of 21

13 Film Capacitors Power Electronic Capacitors * 2. Expected lifetime V/Vn 1,1 1,05 1 0,95 0,9 Expected tld C C C 0,5 0,7 0,9 1,1 1,3 1,5 tld /tld (co ) Expected lifetime t ld at different hotspot temperature (Θ hs ) and voltage V For short term operation (maximum 10% of the total expected lifetime) and capacitors with diameter 85 and 90 mm a maximum hot spot temperature of 85 C is allowed without further reduction of the lifetime. 3. Current derating 3.1 Current derating graphs for capacitors 0 V DC 0B0287K1 20 0B07K1 20 0B0627K1 20 0B0567K3 Please read Cautions and warnings and Page 13 of 21

14 Film Capacitors Power Electronic Capacitors * 0B0907K3 0B0148K3 0B0128K743 0B07K B0787K Current derating graphs for capacitors 1100 V DC 0B1147K101 0B1287K103 Please read Cautions and warnings and Page 14 of 21

15 Film Capacitors Power Electronic Capacitors * 0B1317K101 0B17K101/0B1427A101 Temp. ( C) 0B1427K101/0D1427K101 = C 0D17K B17K B1487K B1617K103 T e mp. ( C ) 0D1617K Please read Cautions and warnings and Page 15 of 21

16 Film Capacitors Power Electronic Capacitors * 0B17K103 0B1947K D17K B1118K B1158K B1277K B1227K104 T emp. ( C ) 0B1377K Please read Cautions and warnings and Page 16 of 21

17 Film Capacitors Power Electronic Capacitors * 0B1427K B1477K B1537K Current derating graphs for capacitors 1200 V DC 0B1227K204 0B17K B1347K B1447K Please read Cautions and warnings and Page 17 of 21

18 Film Capacitors Power Electronic Capacitors * 0B17K B17K B1737K B1367K B1577K B1108K Current derating graphs for capacitors rated 900 / 1320 / 19 V DC are available upon request. Please read Cautions and warnings and Page 18 of 21

19 Film Capacitors Power Electronic Capacitors * 4. FIT FIT Rate FIT ,8 0,9 1 1,1 1,2 Voltage V/Vn x Un Θ hs º C º C º C º C º C Please read Cautions and warnings and Page 19 of 21

20 Film Capacitors Power Electronic Capacitors * Cautions and warnings In case of dents of more than 1 mm depth or any other mechanical damage, capacitors must not be used at all. Check tightness of the connections/terminals periodically. The energy stored in capacitors may be lethal. To prevent any chance of shock, discharge and short-circuit the capacitor before handling. Failure to follow cautions may result, worst case, in premature failures, bursting and fire. EPCOS AG is not responsible for any kind of possible damages to persons or things due to improper installation and application of capacitors for power electronics. Safety Electrical or mechanical misapplication of capacitors may be hazardous. Personal injury or property damage may result from bursting of the capacitor or from expulsion of oil or melted material due to mechanical disruption of the capacitor. Ensure good, effective grounding for capacitor enclosures. Observe appropriate safety precautions during operation (self-recharging phenomena and the high energy contained in capacitors). Handle capacitors carefully, because they may still be charged even after disconnection. The terminals of capacitors, connected bus bars and cables as well as other devices may also be energized. Follow good engineering practice. Thermal load After installation of the capacitor it is necessary to verify that maximum hot-spot temperature is not exceeded at extreme service conditions. Mechanical protection The capacitor has to be installed in a way that mechanical damages and dents in the aluminum can are avoided. Storage and operating conditions Do not use or store capacitors in corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. In dusty environments regular maintenance and cleaning especially of the terminals is required to avoid conductive path between phases and/or phases and ground. The maximum storage temperature is 85 C. Service life expectancy Electrical components do not have an unlimited service life expectancy; this applies to self-healing capacitors, too. The maximum service life expectancy may vary depending on the application the capacitor is used in. Please read Cautions and warnings and Page 20 of 21

21 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet ( Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the General Terms of Delivery for Products and Services in the Electrical Industry published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at Page 21 of 21