METALLIZED POLYESTER FILM CAPACITOR

Transcription

1 Dimensions Characteristic graph 4-39 METALLIZED POLYESTER ILM CAPACITOR Type MMC eatures Smaller version of MM type. Very small size, achieved by our unique manufacturing method. ighly reliable because of its self-healing performance. Uniform flame-retardant epoxy resin coating through the latest resin technology. This provides miniature size and light weight. Specifications Temp range -4 to +85 C(+5 C) Insulation resistance C.33µ 5,MΩ or more C>.33µ 5,Ω or more Voltage Capacitance Cap. tolerance 5V, 4V, 45V, 3V, V, 5V.d.c 5V. to µ (E-) 45V. to 3.3µ (E-) 4V. to 4.7µ (E-) 3V. to.µ (E-) V. to.47µ (E-) 5V. to.µ (E-) ±5%(J), ±%(K) Tangent of loss angle.8 or less (at kz) * ( ) Marked temperature shows an operational range when a voltage is derated. Endurance Damp heat 85 C.V. 5%, hr C/C ±5%within tanδ. or less IR C.33µ,7MΩ or more C>.33µ 9Ω or more 4 C 9 to 95%R.V.5hr C/C ±7%within tanδ. or less IR C.33µ,7MΩ or more C>.33µ 9Ω or more Straight lead type Single formed lead type Max Max T Cap range Style.5Max P ±. * or -dimension exceeding mm,.mm Max * V,5V: P±.5mm 5V.d.c 4V.d.c to to V.d.c to 335 3V.d.c Max Min to ±.5 ±.5 5.Max 5.±.5 to to 475 to 335 to ±.5 5.Ma 5.±.5 84 to to to to V.d.c to 474 to 73 to 474 5V.d.c to to 8 8 to or a pitch space() of the taping specification, refer to TAPAING DEMENSIONS Taping dimensions

2 4-3 Characteristic graph eatures Dimensions METALLIZED POLYESTER ILM CAPACITOR Type MMC Dimensions(mm) Capacitors Code Cap(µ) MMC 5V.dc T P MMC 4V.dc MMC 45V.dc T P T P / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /7.5/ /7.5/ / /7.5/ /7.5/ / /7.5/ /7.5/ / /7.5/ /7.5/ / /7.5/ /7.5/ / /7.5/ /7.5/ / /7.5/ /7.5/ / /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /

3 4-3 Characteristic graph eatures Dimensions METALLIZED POLYESTER ILM CAPACITOR Type MMC Dimensions(mm) Capacitos Code Cap(µ) MMC 3V.dc T P MMC V.dc MMC 5V.dc T P T P / / / / / / / / / / / / /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/ /7.5/

4 eatures Dimensions 4-3 METALLIZED POLYESTER ILM CAPACITOR Type MMC Characteristics of permissible current to frequency MMC 5V MMC 4V , requency (kz) , requency (kz) MMC 3V MMC 8V , requency (kz) , requency (kz) MMC V MMC 5V , requency (kz) , requency (kz)

5 4- PART NUMBER SEQUENCE Internal code Model code Series code Lead configuration Rated voltage code Capacitance Nominal capacitance (Standard "") Lead dimensions code / code tolerance code value code Packaging configulation code Lead configuration code Lead dimension code / Packing configuration code(* ) Code Lead configuration Typical code example Description * Straight, long leads, bulk A code for products with straight leads (bulk packaging) is "". C Straight, long leads, bulk 5 or products with cut leads, dimension codes have been set according to length Single formed leads, bulk Lead spacing (mm) Code Lead spacing (mm) Code ( * 3) Each code stands for the spacing between leads of a product with formed leads. (bulk) S ormed leads, taped V ormed leads, taped SMD, taped ormed leads type 4 Style Code ( * 4) D D D A code stands for the configuration taping. (Ammo packaging) or more information, see a taping specification for automatic mounting. A code stands for the configuration taping. or more information, see a taping specification for automatic mounting. * A blank stands for straight leads. * Depending on types, there might be exception out of this role. Confirm when ordering. *3 A code for Cap 47 to 33 of series with model code of is defined as I5. *4 A code for Cap 47 to 33 of series with model code of is defined as A. Rated voltage code(v.d.c, V.a.c) Voltage code Capacitance tolerance code Code G J K M Capacitance tolerance(%) ± ± ±3 ±5 ± ± Nominal capacitance value code This is expressed in p by using a three figures. The first two figures : Significant figures of nominal capacitance value. The third figures : The number of zeros to follow the significant figures. Example ) hen ordering capacitors with single-formed leads of 5V,.µ±5%, taped and ammo-packaged. A (Standard "") Internal use Model code ) hen ordering capacitors with single-formed leads of 5.mm of MMC 5V,.µ±.%, in bulk. M M ZV 5 J 4 M C 5 Internal use Model code 3) hen ordering capacitors with straight leads of 5V.µ±5%, in bulk. MM T 5 J 4 3 K 5 (Standard "") (Standard "") 5 Internal use 4 Model code 5

6 4- TE RACTERISTICS O CAPACITORS The characteristics vary according to ratings of capacitance, voltage and so on. Examples of the characteristics of capacitors with a capacitance value of.µ are shown below. requency Characteristics C C Rate of capacitance drift (%) - - C/C-f tanδ Tangent of loss angle 5 tanδ-f MM(*) AS APS 4 3 MM (*) AS APS impeadance(ω) Impedance Z-f Cap.Ω Cap.Ω Cap.Ω requency (z) Temperature characteristics C C Rate of capacitance drift C/C-Temp (%) MM ( * ) AS 4 APS requency (z) IR tanδ (MΩ) Tangent of loss angle tanδ-temp Insulation resistance IR-Temp.4 8. MM ( * ) AS APS 7 MM ( * ) AS APS 7 8 requency (z) Temperature ( C) Temperature ( C) ight-temperature endurance with load C C Rate of capacitance drift 3 C/C-Time (%) MM(*) AS APS Temperature ( C) IR Temp 85 C tanδ (MΩ) Tangent of loss angle.8 tanδ-time Temp 85 C 8 Insulation resistance IR-Time Temp 85 C MM (*) AS APS 7 MM(*) AS APS ,,5, Damp heat endurance with load C C Rate of capacitance drift C/C-Time (%) 8 MM (*) AS APS Temp.4 C umid 95% 5,,5,. 4 5,,5, Temp.4 C IR tanδ (MΩ) Tangent or loss angle tanδ-time umid 95% Insulation resistance IR-Time.8.8 MM(*).7 AS APS.7. MM (*) AS APS Temp.4 C umid 95% ,,5, 5,,5, ,,5,5,75,

7 - 3 SPECIICATIONS O TAPING OR AUTOMATIC INSERTION Standard-taping dimensions(mm) Straight ormed Lead Type Type V Lead Type Style Style Style3 Style4 Style5 Style 5 47to4 47 to4 5 to54 to54 to4 to4 4 to84 4to to84 4to474 5 to to83 83 to84 393to83 83 to84 4 to3 3 to to83 3to to83 AM 5 to54 APS to33 393to4 393 to4 5 to3 4 to3 AS 5 7to4 7to4 4to84 4to34 4to84 4to34 8to 73 8to to83 4to 333 to83 4to 5 3 to5 3to to5 3 to55 3to5 5 3to MT 5 3 to55 MM 333to to5 5to 54 to5 5to 5 to83 83to 74to84 83to 74to84 4 to83 4 to394 to83 4to394 3 to393 to4 to393 to4 to to 5 to8 to8 MMC 5 to54 84 to to5 84 to to55 4/45 to to4 4to to4 4to474 3 to8 3to 53 to 3 to 53 to MMX 5 to to84 394to5 394to84 84 to395 4 to4 4to474 4to5 4to474 54to to474 4 to5 4to to5 3 to 53 to 53to394 53to 74to54 MMD 5 3to83 83to 74 to474 83to 74to to 53 to84 3to 53to MML 5 3to 74to84 84to to84 84to to to4 4to to4 4to84 5 3to93 3to334 3to93 4to to93 3to 3to93 4to54 4/45 3to93 3to74 3to93 4to34 3 3to33 3to53 3to33 333to4 8 to33 to4 to33 to4 5 to3 to53 to9 to3 NSM /5 Packaging style T L L T or, L is 33 5, is 355 5, T is 45 5(mm) Reel packing avaiable in Style. Please contact Nissei for detailed assistance.

8 L 4-3 SPECIICATIONS O TAPING OR AUTOMATIC INSERTION Standard-taping dimensions(mm) Type V Straight Lead Type ormed Lead Type Style Style Style3 Style4 Style5 Style 5 47to4 47 to4 5 to54 to54 to4 to4 4 to84 4to to84 4to474 5 to to83 83 to84 393to83 83 to84 4 to3 3 to to83 3to to83 AM 5 to54 APS to33 393to4 393 to4 5 to3 4 to3 AS 5 7to4 7to4 4to84 4to34 4to84 4to34 8to 73 8to to83 4to 333 to83 4to 5 3 to5 3to to5 3 to55 3to5 5 3to MT 5 3 to55 MM 333to to5 5to 54to5 5to 5 to83 83to 74to84 83to 74to84 4 to83 4 to394 to83 4to394 3 to393 to4 to393 to4 to to 5 to8 to8 MMC 5 to54 84 to to5 84 to to55 4/45 to to4 4to to4 4to474 3 to8 3to 53 to 3 to 53 to MMX 5 to to84 394to5 394to84 84 to395 4 to4 4to474 4to5 4to474 54to to474 4 to5 4to to5 3 to 53 to 53to394 53to 74to54 MMD 5 3to83 83to 74 to474 83to 74to to 53 to84 3to 53to MML 5 3to 74to84 84to to84 84to to to4 4to to4 4to84 5 3to93 3to334 3to93 4to to93 3to 3to93 4to54 4/45 3to93 3to74 3to93 4to34 3 3to33 3to53 3to33 333to4 8 to33 to4 to33 to4 5 to3 to53 to9 to3 NSM /5 Packaging style Ammo Pack L T 3±7 3±7 3±7 3±7 3±7 3±7 45±5 5±5 55±5 or, L is 33±7, is 355±7, T is 45±5(mm) Reel packing avaiable in Style. Please contact Nissei for detailed assistance. T

9 t 4-4 TAPAING SPECIICATIONS OR AUTOMATIC INSERTION Taping specification by type Shape Straight Lead Type P.7±. P.7±.3 P 4. or 3.85±.7 P.35±.3 See the list of dimensions shown by type. 3.5 or 5. or h ± Min. 9.±.5 3. Max. D 4.±. t.7±. 8.5±.5 P P Style P P D *or NSMS -dimension is.±5 mm. or taped products, order in an integral multiple of quantity packaged in a box. or bulk (both products with straight leads and formed leads), order in an integral multiple of pieces. Standard-taping dimensions (mm) Shape ormed Lead Type Style Style Style 5 P.7±. 5.±. 5.±. P.7±.3 5.±.3 5.±.3 P 3.85±.7 5.± ±.7 P.35±.3 7.5±.3 7.5±.3 See the list of dimensions shown by type h ±. ±. ± Min. 5. Min. 5. Min. 9.±.5 9.±.5 9.±.5 3. Max. 3. Max. 3. Max..±.5.±.5.±.5 D 4.±. 4.±. 4.±. t.7±..7±..7±..5 Max.. Max.. Max. Shape ormed Lead Type Style 3 Style 4 Style P 5.4±. 3.±. 3.±. P.7±.3 5.±.3 5.±.3 P 3.85±.7 5.± ±.7 P.35±.3 7.5±.3 7.5±.3 See the list of dimensions shown by type h ±. ±. ± Min. 5. Min. 5. Min. 9.±.5 9.±.5 9.±.5 3. Max. 3. Max. 3. Max..±.5.±.5.±.5 D 4.±. 4.±. 4.±. t.7±..7±..7±.. Max.. Max.. Max. P P h P P Shape P Shape P P D P D

10 4-5 SPECIICATIONS O TAPING OR AUTOMATIC INSERTION CIP Type Taping Dimensions(mm) Taping dimensions of chip type (mm) Type V Size Cap A B C E T P P P d d to 8.45 to..3 to..5±. 8. to. 3.5±.5.75±..5±.5 4.±. 4.±. 4.±..5+./-.±. 8,3.55 to..3±. 3 to.9±. 3.5 to..±..±. V.dc 3 73,333.3± ,.± to 83.8 to..8± ±. to 7.55 to..3 to..5±..± to 3.9±. 3.5 to..3±..±. 3 3 to 83.8 to. 3,73.8± ,393.3±. 5V.Dc 4833,53 5. to..±..±. 5.5±.5 8.±..7± ,83.9± ± to..45±..±..3± ,84.±. 4 3.±. 3 to 3.9±. 3.5±..3±. 8.±. 3.5±.5.5±.5 4.±..±. 3 3 to 83.8 to. 3,73.8± ,393.3±. V.dc 4833,53 5.±..±..±. 5.5±.5 8.±..7± ± ,4.± to..45±..±..3± ,84.±. 4 3.±. φd P P E T B A P φd C Reel dimensions(mm) Type V Size Cap A B C D r to3 8+/-3 ±. ±.8 3±..±.5 9.±.5.4 ±. V.dc 3 to 3 53 to4 to to3 5V.dc 3 3 to to4 33±. 8±. 3.4 ±. 7.4 ±. 4 4 to 3 to3 8+/-3.±. 9. ±.5.4±. V.dc 3 3 to to4 33±. 8±. 3.4 ±. 7.4±. 4 4 to C r A D B