SMD Common Mode Choke - CUW Series. CUW Series For USB 2.0, IEEE1394b, LVDS Applications. Product Identification
|
|
|
- Shannon Cummings
- 6 years ago
- Views:
Transcription
1 SMD Common Mode Choke - CUW Series CUW Series For USB 2.0, IEEE1394b, LVDS Applications A full series of common mode choke is designed for excellent noise attenuation with compact sizing for use in wide range of applications. Both standard series and custom designs are available. Features RoHS Compliant Miniature SMD type common mode filter for fully automated assembly Wide impedance range (30Ω ~ 2200Ω) for noise suppression Excellent solderability Applications USB line for personal computers and peripheral IEEE 1394 line for personal computers, DVC, STB LVDS, panel line for liquid display panels, graph card,etc. Product Identification Packaging: T:Tape and Reel Shape and Dimensions Recommended Pattern CUW10/11/31 CUW21 Dimensions in mm TYPE A B C D E CUW ± ± ± CUW ± ± ± CUW ± ± ± CUW ± ± ± Dimensions in mm TYPE A B C D CUW CUW CUW CUW
2 Impedance Tolerance Test Frequency RDC Max Irms (ma) Max Rated Withstamd Insulation Resistance (MΩ) Min CUW10T-250M-N 25 20, CUW10T-600M-N 60 20, CUW10T-M-N 90 20, CUW10T-M-N , CUW10T-141M-N , CUW10T-M-N , Note: When ordering, please specify tolerance code. Tolerance: M=±20%, Y=±25% rms for 20 rise from 25 ambient RDC:HP4338B or Chroma (Single Wire Test Value) Irms:HP4284A+HP42841A/HP4285A+HP42841A Test Instruments:HP4287A Material/Impedance Analyzer 1000 COMMON MODE IIMPEDANCE NORMAL MODE FREQUENCY
3 Impedance Tolerance Test Frequency RDC Max IDC (ma) Max Rated Withstamd Insulation Resistance (MΩ) Min CUW11T-250T-N CUW11T-600M-N CUW11T-670M-N CUW11T-M-N CUW11T-M-N CUW11T-M-N CUW11T-201M-N CUW11T-331Y-N Note: When ordering, please specify tolerance code. Tolerance: M=±20%, Y=±25%, T=±30% IDC for Inductance drop 10% from its value without current RDC:Chroma (Single Wire Test Value) IDC:HP4284A+HP42841A/HP4285A+HP42841A Test Instruments:HP4287A Material/Impedance Analyzer Common Mode 1000 IMPEDANCE FREQUENCY Normal Mode
4 Test Rated Withstamd Insulation Impedance Tolerance RDC IDC Frequency Resistance Max (ma) Max (MΩ) Min CUW21T-300M-N CUW21T-670M-N CUW21T-750M-N CUW21T-M-N CUW21T-M-N CUW21T-M-N CUW21T-181M-N CUW21T-201M-N CUW21T-M-N CUW21T-261M-N CUW21T-301M-N CUW21T-361M-N CUW21T-371M-N CUW21T-501M-N CUW21T-671M-N CUW21T-901M-N Note: When ordering, please specify tolerance code. Tolerance: M=±20% IDC for Inductance drop 10% from its value without current RDC:Chroma (Single Wire Test Value) IDC:HP4284A+HP42841A/HP4285A+HP42841A Test Instruments:HP4291A Material/Impedance Analyzer
5 Test Rated Withstamd Insulation Impedance Tolerance RDC IDC Frequency Resistance Max (ma) Max (MΩ) Min CUW31T-M-N CUW31T-M-N CUW31T-M-N CUW31T-M-N CUW31T-261M-N CUW31T-601M-N CUW31T-102M-N CUW31T-222M-N Note: When ordering, please specify tolerance code. Tolerance: M=±20% IDC for Inductance drop 10% from its value without current RDC:Chroma (Single Wire Test Value) IDC:HP4284A+HP42841A/HP4285A+HP42841A Test Instruments:HP4291A Material/Impedance Analyzer COMMON MODE 222 IMPEDANCE NORMAL MODE FREQUENCY
6 Packaging Specifications B B Tape Dimensions / ± 0.1 T 2.0 ± 0.05 F 1.75 ± 0.1 W Reel Dimensions K A P Trailer C Blank part (160mm min.) Blank Compartments with Cover Tape and Leader (330mm min.) Dimensions in mm TYPE Tape Dimensions Reel Dimensions Quantity A B T W P F K A B C D PCS / Reel CUW CUW CUW CUW
TYPE A B C D A B C BPSC ± ± BPSC ± ±
SMD Shielded Power Inductors Series Series Features RoHS, Halogen Free and REACH Compliance Magnetic shielded Various package size and wide inductance range Applications AP Routers STBs LCD TVs and monitors
YAGEO CORPORATION SMD INDUCTOR / BEADS. LCN Series. Lead-free / For RF Signals / Customer Design
YAGEO CORPORATION SMD INDUCTOR / EADS Wound Chip Inductors High Frequency LCN Series Lead-free / For RF Signals / Customer Design Due to technical expertise of accurately wounding skill,these chip inductors
Power Inductors. Type 3622 Series. Type 3622 Series. Electrical Characteristics A Series. Key Features
The 3622 Series is an innovative design for a high power SMD choke. It combines Tyco quality with low price and high long-term reliability. The layout and profile make it a highly appropriate component
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF series Type: CLF7045 (6.9x7.2 mm) CLF0040 (9.7x0.0 mm) Issue date: September 202 (/4) Inductors for Power Circuits Wound/STD Magnetic Shielded
Data sheet SMD Wire Wound Chip Inductor WL Series
Data sheet SMD Wire Wound Chip Inductor W Series Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high
SMD Power Inductors. Type 3624 Series. Type 3624 Series. Electrical Characteristics A Series. Environmental Characteristics A Series
The 3624 series unique design allows for a range of products which give not only a high current rating, but minimizes the board space required for this product. Tyco Sigma quality, matched with reliability
Power Inductor SMT Type
SMD SERIES WIRE WOUND SMD CHIP INDUCTORS Applications :.DSC, DVC products..pcs.hard disk drives and computer peripherals..telecommunications devices..tv circuits..test equipment. Shape and Dimensions (Dimensions
CM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors
*RoHS COMPLIANT 220K Features High resistance to heat and humidity Resistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide inductance range (1.0 nh to 1000 µh)
Wire Wound Chip Inductor
FEATURES Ceramic base provides high SRF Ultra-compact inductors provide high Q factors High current range available Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
SPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 2 PRODUCT DETAIL 3-5 REEL DIMENSIONS 6 REEL PACKAGING QUANTITY 6 RELIABILITY TEST AND CONDITIONS 7 RECOMMENDED
SLF Series. SMD Power Inductors APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES SLF - -
Yageo corporation INUCTORS / BEAS SLF Series SM Power Inductors APPLICATIONS Portable telephones, computers, hard disk drives and other electronic equipment. OUTLINE SLF series is designed for low profile
Chip Inductor. Power Inductor
Chip Inductor Type Style Features Series Page Thin Film Thin Film Chip Inductor A 3 Thin Film Common Mode Filter CMF 10 Multilayer Multilayer Chip Inductor C 14 Multilayer Ferrite Chip Inductor M 20 Multilayer
74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern
![74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern](/thumbs/85/91716071.jpg "74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern")
A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 7.5 Amps (based on only 10% inductance drop) Inductance up to 1mH for all case
MIDDLE LOAD RELAY FOR SMART J/B
MIDDLE LOAD RELAY FOR SMART J/B CN-M RELAYS (ACNM) New Compliance with RoHS Directive FEATURES. Best space savings in its class.. Compact and high-capacity A load switching.. Full line up (High heat-resistant
SMD POWER INDUCTORS SELECTION GUIDE
SMD POWER INDUCTORS SELECTION GUIDE Unshielded Inductor Type Item Type Dimension (mm) Inductance (uh) Isat (A) Lead Free P/N. DA SERIES DA42 4.0 4.5 3.0 1.0 ~ 68 0.30 ~ 2.18 DA42NP DA43 4.0 4.5 3.5 1.0
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF-D series Type: CLF7-D (.9x7. mm) Issue date: May Conformity to RoHS Directive: This means that, in conformity with EU Directive /9/EC, lead,
2R2. Design Code Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
Surface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
COMPACT FLAT SIZE FOR AUTOMOTIVE
PACT FLAT SIZE FOR AUTOMOTIVE RELAYS RoHS compliant FEATURES Compact flat type Flat size enables it to be built-in switch units. PC board terminal type: 9.5 mm.374 inch Surface-mount terminal
Chip Inductor. Power Inductor
Chip Inductor Type Style Features Series Page Thin Film Multilayer Thin Film Chip Inductor A 3 Multilayer Chip Inductor C 8 Multilayer Ferrite Chip Inductor M 13 Multilayer Chip Bead CB 19 Wire Wound Wire
COMPACT FLAT SIZE FOR AUTOMOTIVE
PACT FLAT SIZE FOR AUTOMOTIVE RELAYS RoHS compliant FEATURES Compact flat type Flat size enables it to be built-in switch units. PC board terminal type: 9.5 mm.374 inch Surface-mount terminal
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
SCDS Series. Shielded SMD Power Inductors. Features
YAGEO CORPORATION SMD INDUCTOR / BEADS Series Shielded SMD Power Inductors Applications Power Supply for VTRs OA Equipment LCD Televisions Notebook PCs Portable Communication Equipment DC / DC Converters,
WLPM Series SMD Molded Power Inductors
WLPM545230 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLPM545230 Series_V3.0 June. 2015 FEATURES 1. Shielded construction. 2.
Multi-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
Wire Wound Chip Inductor-WB Series
Wire Wound Chip Inductor-WB Series Construction 4 1 3 1 Ceramic Core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet Wire 4 UV Glue 2 Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
Shielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
Metal Alloy Low-Resistance Resistor Specifications
Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following
WL Series Wire Wound Chip Inductor
Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip Inductor for Fully Automated Assembly
Wire Wound Chip Inductor (Ferrite)
FEATURES Very strong solderability by reflow soldering, soldering iron or wave soldering Highly accurate dimensions Automated mounting capable Terminals are highly resistant to pull forces Highly resistant
(TRWL) Wire Wound Chip Ceramic Inductor
Version: April 12, 2018 (TRWL) Wire Wound Chip Ceramic Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
VLS-E series. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLS-E series VLS201610E VLS201612E VLS2010E VLS2012E VLS252008E VLS252010E VLS252012E VLS252015E VLS3010E VLS3012E VLS3015E VLS4012E (1/52) REMINDERS
YAGEO CORPORATION Lead-Free & RoHs Compliance!!
Lead-Free & RoHs Compliance!! SPECIFICATION FOR APPROVAL CUSTOMER: CUSTOMER P/N: OUR DWG No: QUANTITY: Pcs. DATE: ITEM: PBY321611T-SERIES-N SPECIFICATION ACCEPTED BY: COMPONENT ENGINEER ELECTRICAL ENGINEER
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: 763-1434 Product Details RS Pro SMD inductor offers an inductance of 4.7 nh
SMD Wire Wound Chip Inductor
GSW Series SMD Wire Wound Chip Inductor Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
WLCW1608 SMD Wire Wound Ceramic Chip Inductors
WLCW1608 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608 Series_V7.0 Jun. 2017 Features 1. Standard chip size bobbin with
PTS645 Series 6 mm Tact Switches
PTS5 Series mm Tact Switches Features/enefits Compact size x mm Variety of actuator lengths Choice of actuation force RoHS compliant and compatible Typical Applications Consumer products Instrumentation
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
1 8 WK L_V_AUTO_V01 FEB
WK12L, WK20L, WK25L 1%, 5% Thick Film Power Chip Resistor Wide Termination RoHS compliant and Halogen free Size 0612, 1020, 1225 Automotive AEC Q200 Compliant ASTM B-809-95 Compliant *Contents in this
Multilayer Chip Beads / CB Series
.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead and also support lead-free soldering..applications:
Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
Input Voltage Range ±10% Output Voltage Accuracy Line Voltage Regulation RSS, RSS8, RSD, RSD10 1.2%/1% of Vin typ.
END OF LIFE Dec.11 Features Unregulated Converters Selection Guide RoHS 5/6 Conform 1kVDC or3kvdc Isolation Options H version Approved for Medical Applications Suitable for Fully Automated Assembly Optional
SPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL CUSTOMER CUSTOMER P/N OUR DWG No Lead-Free & RoHs Compliance!! QUANTITY Pcs. DATE 2010/11/01 ITEM SBK160808T-121Y-N COMPONENT ENGINEER ELECTRICAL ENGINEER MECHANICAL ENGINEER
Approval sheet. WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice.
WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608HQ Series_V3.0 Jun. 2017 Features 1. Standard chip
Feature. -Low profile, High Current are Available. Shock and Pressure. -Tighter Tolerance of ±2% -Smaller Size of 0402 (1005) -CATV Filter, Tuner
Wire Wound Chip Inductor-WL Series Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800μF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Surface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)
1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Power Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications
Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com
B3F. Miniature, Space-saving Switch
B3F Miniature, Space-saving Switch Long mechanical / electrical service life Ideal for applications such as audio, office and communications equipment, TVs, etc Taped radial, vertical, high-force, and
Wire Wound Chip Inductors Ferrite SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current
(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI - 100807 - R12 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
Power Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12
Power Inductor Non-shielded PDH Series 2 PD Series 4 PCD Series 7 Packaging Info 10 Environmental Specifications 12 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com http://www.seielect.com
July terminal Filters. For Large-current Power Line. YFF-HC Series [1206 inch]* Feed through filter. * Dimensions Code JIS[EIA]
![July terminal Filters. For Large-current Power Line. YFF-HC Series [1206 inch]* Feed through filter. * Dimensions Code JIS[EIA]](/thumbs/80/81223702.jpg "July terminal Filters. For Large-current Power Line. YFF-HC Series [1206 inch]* Feed through filter. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s July 215 3-terminal Filters For Large-current Power Line YFF31HC 3216 [126 inch]* Feed through filter * Dimensions Code JIS[EIA] (1/4) 3-terminal Filters For Large-current Power
2R2. 4 Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Features. Samples. I max (A) P d. typ. (W)
0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
P7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812 Wire Wound Chip Inductor (Ferrite) - Standard Features Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate
COMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS Low profile 3mm height for compact applications Advanced and high reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432)
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432) Metal Current Sensing Type *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25N_V14 Jul - 2015
This specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for Warn : This product series can t be used in synchronous rectification circuit that is over 24V. PRODUCT INDENTIFICATION
COMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS High reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified production PPAP level 3 support AEC-Q200 qualified with
Recommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB, LC, LA Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB, LC, LA type) Unique Ceramic
SMD Power Inductor-VLH
SMD Power Inductor-VLH Applications Pagers, Cordless phone. High frequency communication products. Personal computers. Disk drives and computer peripherals. power supply circuits. and rated current ranges
MTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
B Unit: mm TYPE A B C D E F. How to Order KL 1410 M T R60. SEI Type Dimensions Tolerance Packaging Inductance
DIP Power Inductor KL Scope This specification applies to DIP Power Choke. High power Features Magnetic shielded construction for high density board assembly High performance excellent DC current characteristics
Content (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18
Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition
High Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
Application Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
October Circulator SMD. CU4S0506 Series. 5x5mm* * Dimensions Code JIS
R F C o m p o n e n t s October 2015 Circulator SMD 5x5mm* * Dimensions Code JIS Circulator SMD Product compatible with RoHS directive Overview of PART NUMBER CONSTRUCTION CU4S0506 C - - Series name A
FrelTec GmbH. Wire Wound Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Ceramic Chip Inductors SMD 8/2/2017 1/15 GmbH www.freltec.com SPECIFICATION Part Number 091 02 * 101 * J * S * T05 ** _ Type Size Value Toleranc
VAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
NTA Series Isolated 1W Dual Output SM DC/DC Converters
www.murata-ps.com NTA Series FEATURES RoHS compliant Efficiency up to 78% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 Package material Footprint over pins 1.64cm 2 Lead frame
Model C2023J5003A00. Ultra Low Profile db, 90 Hybrid Coupler
Model C223J53A Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C223J53A is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It is
RF Inductor. SMD Wirewound Inductors Chip Open-Type - WL Series / 绕线贴片电感 of 13
SMD Wirewound Inductors Chip Open-Type - WL Series / 绕线贴片电感 Wirewound Chip Inductor Features - Wire wound Ceramic Construction Provide High s. - Ultra-compact Inductors Provide Exceptional Values. - Low
FrelTec GmbH. SMD Power Inductors
GmbH Mathildenstr. 10A 82319 Starnberg Germany 10/12/2011 1/13 GmbH www.freltec.com SPECIFICATION Part Number 107 252010 * G * 100 * M E02 * Type Size Use Value Packing 107 : SMD Power Inductor 252010:
SinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics
*RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed
Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
Surface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)
1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
MTC2 Series Isolated 2W SM 2:1 Input Single Output DC-DC Converters
MTC2 Series SELECTION GUIDE FEATURES UL 9 recognised for reinforced insulation ANSI/AAMI ES1-1, 1 MOPP/ 2 MOOPs recognised 3kVAC isolation test voltage Hi Pot Test Continuous short circuit protection Output
Impedance and Current Ranges
Features: Applications: Standard chip bead used to suppress lower frequency and lower current signals Offers impedance over a broad frequency range High current option available up to 6A Suitable for flow
October Isolator SMD. CU4S0506 Series. 5x5mm* * Dimensions Code JIS
R F C o m p o n e n t s October 2015 Isolator SMD CU4S0506 Series 5x5mm* * Dimensions Code JIS Isolator SMD Product compatible with RoHS directive Overview of CU4S0506 Series PART NUMBER CONSTRUCTION CU4S0506
MPI2520 High Current, Low Profile, Miniature Power Inductors HALOGEN FREE
Technical Data 10199 MPI2520 High Current, Low Profile, Product description: Pb Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 2.7 x 2.2 x 1.0 / 1.2mm maximum surface
Features. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B
RoHS Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
2R2. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
Power Inductor DIP Type
In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the next three bands indicate
MTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
Shielded SMD Power Inductor
PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for
Positive Temperature Coefficient (PTC) Data Sheet
Positive Temperature Coefficient (PTC) Data Sheet Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18-20-25X(W) Ver.13 Oct.-2010 FEATURE 1. High power
NXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
INDUCTORS SMD POWER INDUCTORS SMD
INDUCTORS, COIS, FITERS & FERRITES INDUCTORS SMD POWER INDUCTORS SMD K AND CK SERIES STANDARD MUTIAYER INDUCTORS Features: Internal printed coil structure that creates a closed magnetic circuit which acts
NXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M
*RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
NXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
Inductors for High-frequency Circuits
Inductors for High-frequency Circuits Multilayer/STD MLG series Type: MLG0603S MLG1005S MLG1608 0603[0201 inch]* 1005[0402 inch] 1608[0603 inch] * Dimensions Code JIS[EIA] Issue date: November 2011 Conformity